diff --git a/Makefile.rhelver b/Makefile.rhelver
index 062439f2a..efbe4b8c7 100644
--- a/Makefile.rhelver
+++ b/Makefile.rhelver
@@ -12,7 +12,7 @@ RHEL_MINOR = 2
 #
 # Use this spot to avoid future merge conflicts.
 # Do not trim this comment.
-RHEL_RELEASE = 203
+RHEL_RELEASE = 204
 
 #
 # ZSTREAM
diff --git a/kernel-aarch64-debug-rhel.config b/kernel-aarch64-debug-rhel.config
index 72eaf711e..cc840030f 100644
--- a/kernel-aarch64-debug-rhel.config
+++ b/kernel-aarch64-debug-rhel.config
@@ -1107,6 +1107,7 @@ CONFIG_CXL_ACPI=y
 CONFIG_CXL_BUS=y
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -4263,7 +4264,9 @@ CONFIG_PROC_VMCORE_DEVICE_DUMP=y
 CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 CONFIG_PROFILING=y
+# CONFIG_PROVE_CXL_LOCKING is not set
 CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 CONFIG_PSAMPLE=m
 CONFIG_PSI_DEFAULT_DISABLED=y
diff --git a/kernel-aarch64-rhel.config b/kernel-aarch64-rhel.config
index deb7a1d52..1175b3dfb 100644
--- a/kernel-aarch64-rhel.config
+++ b/kernel-aarch64-rhel.config
@@ -1107,6 +1107,7 @@ CONFIG_CXL_ACPI=y
 CONFIG_CXL_BUS=y
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -4241,7 +4242,9 @@ CONFIG_PROC_VMCORE_DEVICE_DUMP=y
 CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 CONFIG_PROFILING=y
+# CONFIG_PROVE_CXL_LOCKING is not set
 # CONFIG_PROVE_LOCKING is not set
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 CONFIG_PSAMPLE=m
 CONFIG_PSI_DEFAULT_DISABLED=y
diff --git a/kernel-ppc64le-debug-rhel.config b/kernel-ppc64le-debug-rhel.config
index 642d73caf..4d4ae639b 100644
--- a/kernel-ppc64le-debug-rhel.config
+++ b/kernel-ppc64le-debug-rhel.config
@@ -912,6 +912,7 @@ CONFIG_CXLFLASH=m
 CONFIG_CXL=m
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -3923,7 +3924,9 @@ CONFIG_PROC_VMCORE_DEVICE_DUMP=y
 CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 CONFIG_PROFILING=y
+# CONFIG_PROVE_CXL_LOCKING is not set
 CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 CONFIG_PSAMPLE=m
 CONFIG_PSERIES_CPUIDLE=y
diff --git a/kernel-ppc64le-rhel.config b/kernel-ppc64le-rhel.config
index 98968fe78..dc9013475 100644
--- a/kernel-ppc64le-rhel.config
+++ b/kernel-ppc64le-rhel.config
@@ -912,6 +912,7 @@ CONFIG_CXLFLASH=m
 CONFIG_CXL=m
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -3903,7 +3904,9 @@ CONFIG_PROC_VMCORE_DEVICE_DUMP=y
 CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 CONFIG_PROFILING=y
+# CONFIG_PROVE_CXL_LOCKING is not set
 # CONFIG_PROVE_LOCKING is not set
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 CONFIG_PSAMPLE=m
 CONFIG_PSERIES_CPUIDLE=y
diff --git a/kernel-s390x-debug-rhel.config b/kernel-s390x-debug-rhel.config
index 2f1a42851..e090bcf17 100644
--- a/kernel-s390x-debug-rhel.config
+++ b/kernel-s390x-debug-rhel.config
@@ -915,6 +915,7 @@ CONFIG_CXL_ACPI=y
 CONFIG_CXL_BUS=y
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -3868,7 +3869,9 @@ CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 CONFIG_PROFILING=y
 CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y
+# CONFIG_PROVE_CXL_LOCKING is not set
 CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 CONFIG_PSAMPLE=m
 CONFIG_PSI_DEFAULT_DISABLED=y
diff --git a/kernel-s390x-rhel.config b/kernel-s390x-rhel.config
index f987091d9..623397783 100644
--- a/kernel-s390x-rhel.config
+++ b/kernel-s390x-rhel.config
@@ -915,6 +915,7 @@ CONFIG_CXL_ACPI=y
 CONFIG_CXL_BUS=y
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -3848,7 +3849,9 @@ CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 CONFIG_PROFILING=y
 CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y
+# CONFIG_PROVE_CXL_LOCKING is not set
 # CONFIG_PROVE_LOCKING is not set
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 CONFIG_PSAMPLE=m
 CONFIG_PSI_DEFAULT_DISABLED=y
diff --git a/kernel-s390x-zfcpdump-rhel.config b/kernel-s390x-zfcpdump-rhel.config
index 89abe8955..17932a7f7 100644
--- a/kernel-s390x-zfcpdump-rhel.config
+++ b/kernel-s390x-zfcpdump-rhel.config
@@ -920,6 +920,7 @@ CONFIG_CXL_ACPI=y
 CONFIG_CXL_BUS=y
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -3864,7 +3865,9 @@ CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILING is not set
 # CONFIG_PROTECTED_VIRTUALIZATION_GUEST is not set
+# CONFIG_PROVE_CXL_LOCKING is not set
 # CONFIG_PROVE_LOCKING is not set
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 # CONFIG_PSAMPLE is not set
 CONFIG_PSI_DEFAULT_DISABLED=y
diff --git a/kernel-x86_64-debug-rhel.config b/kernel-x86_64-debug-rhel.config
index 00e400743..d8a334149 100644
--- a/kernel-x86_64-debug-rhel.config
+++ b/kernel-x86_64-debug-rhel.config
@@ -969,6 +969,7 @@ CONFIG_CXL_ACPI=y
 CONFIG_CXL_BUS=y
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -4094,7 +4095,9 @@ CONFIG_PROC_VMCORE_DEVICE_DUMP=y
 CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 CONFIG_PROFILING=y
+# CONFIG_PROVE_CXL_LOCKING is not set
 CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_PSAMPLE=m
diff --git a/kernel-x86_64-rhel.config b/kernel-x86_64-rhel.config
index 12750f993..5c06674d2 100644
--- a/kernel-x86_64-rhel.config
+++ b/kernel-x86_64-rhel.config
@@ -969,6 +969,7 @@ CONFIG_CXL_ACPI=y
 CONFIG_CXL_BUS=y
 CONFIG_CXL_MEM=m
 # CONFIG_CXL_MEM_RAW_COMMANDS is not set
+CONFIG_CXL_PCI=m
 CONFIG_CXL_PMEM=m
 # CONFIG_DA280 is not set
 # CONFIG_DA311 is not set
@@ -4073,7 +4074,9 @@ CONFIG_PROC_VMCORE_DEVICE_DUMP=y
 CONFIG_PROC_VMCORE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 CONFIG_PROFILING=y
+# CONFIG_PROVE_CXL_LOCKING is not set
 # CONFIG_PROVE_LOCKING is not set
+CONFIG_PROVE_NVDIMM_LOCKING=y
 # CONFIG_PROVE_RAW_LOCK_NESTING is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_PSAMPLE=m
diff --git a/kernel.spec b/kernel.spec
index f2c79102c..a411935f2 100755
--- a/kernel.spec
+++ b/kernel.spec
@@ -119,15 +119,15 @@ Summary: The Linux kernel
 # define buildid .local
 %define specversion 5.14.0
 %define patchversion 5.14
-%define pkgrelease 203
+%define pkgrelease 204
 %define kversion 5
-%define tarfile_release 5.14.0-203.el9
+%define tarfile_release 5.14.0-204.el9
 # This is needed to do merge window version magic
 %define patchlevel 14
 # This allows pkg_release to have configurable %%{?dist} tag
-%define specrelease 203%{?buildid}%{?dist}
+%define specrelease 204%{?buildid}%{?dist}
 # This defines the kabi tarball version
-%define kabiversion 5.14.0-203.el9
+%define kabiversion 5.14.0-204.el9
 
 #
 # End of genspec.sh variables
@@ -606,6 +606,7 @@ BuildRequires: opencsd-devel >= 1.0.0
 %if %{with_tools}
 BuildRequires: gettext ncurses-devel
 BuildRequires: libcap-devel libcap-ng-devel
+BuildRequires: libtracefs-devel
 %ifnarch s390x
 BuildRequires: pciutils-devel
 %endif
@@ -1005,6 +1006,15 @@ This package provides debug information for package kernel-tools.
 # of matching the pattern against the symlinks file.
 %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
 
+%package -n rtla
+Summary: RTLA: Real-Time Linux Analysis tools 
+%description -n rtla
+The rtla tool is a meta-tool that includes a set of commands that
+aims to analyze the real-time properties of Linux. But, instead of
+testing Linux as a black box, rtla leverages kernel tracing
+capabilities to provide precise information about the properties
+and root causes of unexpected results.
+
 # with_tools
 %endif
 
@@ -2257,6 +2267,9 @@ popd
 pushd tools/vm/
 %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" slabinfo page_owner_sort
 popd
+pushd tools/tracing/rtla
+%{tools_make}
+popd
 %endif
 
 if [ -f $DevelDir/vmlinux.h ]; then
@@ -2540,6 +2553,16 @@ pushd tools/vm/
 install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
 install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
 popd
+pushd tools/tracing/rtla/
+%{tools_make} DESTDIR=%{buildroot} install
+rm -f %{buildroot}%{_bindir}/osnoise
+rm -f %{buildroot}%{_bindir}/timerlat
+(cd %{buildroot}
+
+        ln -sf rtla ./%{_bindir}/osnoise
+        ln -sf rtla ./%{_bindir}/timerlat
+)
+popd
 %endif
 
 if [ -f $DevelDir/vmlinux.h ]; then
@@ -2926,6 +2949,19 @@ fi
 %{_libdir}/libcpupower.so
 %{_includedir}/cpufreq.h
 %endif
+
+%files -n rtla
+%{_bindir}/rtla
+%{_bindir}/osnoise
+%{_bindir}/timerlat
+%{_mandir}/man1/rtla-osnoise-hist.1.gz
+%{_mandir}/man1/rtla-osnoise-top.1.gz
+%{_mandir}/man1/rtla-osnoise.1.gz
+%{_mandir}/man1/rtla-timerlat-hist.1.gz
+%{_mandir}/man1/rtla-timerlat-top.1.gz
+%{_mandir}/man1/rtla-timerlat.1.gz
+%{_mandir}/man1/rtla.1.gz
+
 # with_tools
 %endif
 
@@ -3062,6 +3098,168 @@ fi
 #
 #
 %changelog
+* Wed Nov 30 2022 Frantisek Hrbata <fhrbata@redhat.com> [5.14.0-204.el9]
+- Documentation/admin-guide: Document nomodeset kernel parameter (Karol Herbst) [2143841]
+- drm: Move nomodeset kernel parameter to the DRM subsystem (Karol Herbst) [2143841]
+- Add rtla subpackage (John Kacur) [2075216]
+- dt-bindings: mmc: PL18x stop relying on order of dma-names (Steve Best) [2137969]
+- dt-bindings: mmc: imx-esdhc: Add i.MX8DXL compatible string (Steve Best) [2137969]
+- dt-bindings: mmc: imx-esdhc: Update compatible fallbacks (Steve Best) [2137969]
+- dt-bindings: mmc: imx-esdhc: Add imx93 compatible string (Steve Best) [2137969]
+- dt-bindings: mmc: Add missing properties used in examples (Steve Best) [2137969]
+- dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string (Steve Best) [2137969]
+- dt-bindings: mmc: imx-esdhc: Add imx8ulp compatible string (Steve Best) [2137969]
+- dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule (Steve Best) [2137969]
+- dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string (Steve Best) [2137969]
+- MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem (Myron Stowe) [2135902]
+- MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver (Myron Stowe) [2135902]
+- MAINTAINERS: Add Mahesh J Salgaonkar as EEH maintainer (Myron Stowe) [2135902]
+- MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint reviewer (Myron Stowe) [2135902]
+- PCI/P2PDMA: Use for_each_pci_dev() helper (Myron Stowe) [2135902]
+- PCI: mt7621: Use PCI_CONF1_EXT_ADDRESS() macro (Myron Stowe) [2135902]
+- PCI: ftpci100: Use PCI_CONF1_ADDRESS() macro (Myron Stowe) [2135902]
+- PCI: Add standard PCI Config Address macros (Myron Stowe) [2135902]
+- PCI: qcom-ep: Check platform_get_resource_byname() return value (Myron Stowe) [2135902]
+- PCI: qcom-ep: Add support for SM8450 SoC (Myron Stowe) [2135902]
+- dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC (Myron Stowe) [2135902]
+- dt-bindings: PCI: qcom-ep: Define clocks per platform (Myron Stowe) [2135902]
+- PCI: qcom-ep: Make PERST separation optional (Myron Stowe) [2135902]
+- dt-bindings: PCI: qcom-ep: Make PERST separation optional (Myron Stowe) [2135902]
+- PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic (Myron Stowe) [2135902]
+- PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS (Myron Stowe) [2135902]
+- PCI: qcom-ep: Expose link transition counts via debugfs (Myron Stowe) [2135902]
+- PCI: qcom-ep: Disable IRQs during driver remove (Myron Stowe) [2135902]
+- PCI: qcom-ep: Make use of the cached dev pointer (Myron Stowe) [2135902]
+- PCI: qcom-ep: Rely on the clocks supplied by devicetree (Myron Stowe) [2135902]
+- PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure (Myron Stowe) [2135902]
+- PCI: qcom: Rename host-init error label (Myron Stowe) [2135902]
+- PCI: qcom: Drop unused post_deinit callback (Myron Stowe) [2135902]
+- PCI: qcom-ep: Add MODULE_DEVICE_TABLE (Myron Stowe) [2135902]
+- PCI: qcom: Sort device-id table (Myron Stowe) [2135902]
+- PCI: qcom: Clean up IP configurations (Myron Stowe) [2135902]
+- PCI: qcom: Make all optional clocks optional (Myron Stowe) [2135902]
+- PCI: qcom: Add support for SA8540P (Myron Stowe) [2135902]
+- PCI: qcom: Add support for SC8280XP (Myron Stowe) [2135902]
+- dt-bindings: PCI: qcom: Add SA8540P to binding (Myron Stowe) [2135902]
+- dt-bindings: PCI: qcom: Add SC8280XP to binding (Myron Stowe) [2135902]
+- dt-bindings: PCI: qcom: Enumerate platforms with single msi interrupt (Myron Stowe) [2135902]
+- PCI: mvebu: Fix endianness when accessing PCI emul bridge members (Myron Stowe) [2135902]
+- PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3 (Myron Stowe) [2135902]
+- phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() (Myron Stowe) [2135902]
+- PCI: imx6: Add i.MX8MP PCIe support (Myron Stowe) [2135902]
+- PCI: dwc: Replace of_gpio_named_count() by gpiod_count() (Myron Stowe) [2135902]
+- PCI: dwc: Drop dependency on ZONE_DMA32 (Myron Stowe) [2135902]
+- dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks (Myron Stowe) [2135902]
+- dt-bindings: PCI: microchip,pcie-host: fix missing dma-ranges (Myron Stowe) [2135902]
+- dt-bindings: PCI: microchip,pcie-host: fix missing clocks properties (Myron Stowe) [2135902]
+- dt-bindings: PCI: mediatek-gen3: Add support for MT8188 and MT8195 (Myron Stowe) [2135902]
+- PCI: pci-bridge-emul: Set position of PCI capabilities to real HW value (Myron Stowe) [2135902]
+- PCI: aardvark: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge (Myron Stowe) [2135902]
+- PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge (Myron Stowe) [2135902]
+- PCI: Fix typo in pci_scan_child_bus_extend() (Myron Stowe) [2135902]
+- PCI: Fix whitespace and indentation (Myron Stowe) [2135902]
+- PCI: Move pci_assign_unassigned_root_bus_resources() (Myron Stowe) [2135902]
+- PCI: Pass available buses even if the bridge is already configured (Myron Stowe) [2135902]
+- PCI: Fix used_buses calculation in pci_scan_child_bus_extend() (Myron Stowe) [2135902]
+- PCI: Expose PCIe Resizable BAR support via sysfs (Myron Stowe) [2135902]
+- PCI/PM: Reduce D3hot delay with usleep_range() (Myron Stowe) [2135902]
+- PCI/PM: Simplify pci_pm_suspend_noirq() (Myron Stowe) [2135902]
+- PCI/PM: Always disable PTM for all devices during suspend (Myron Stowe) [2135902]
+- PCI/PTM: Consolidate PTM interface declarations (Myron Stowe) [2135902]
+- PCI/PTM: Reorder functions in logical order (Myron Stowe) [2135902]
+- PCI/PTM: Preserve RsvdP bits in PTM Control register (Myron Stowe) [2135902]
+- PCI/PTM: Move pci_ptm_info() body into its only caller (Myron Stowe) [2135902]
+- PCI/PTM: Add pci_suspend_ptm() and pci_resume_ptm() (Myron Stowe) [2135902]
+- PCI/PTM: Separate configuration and enable (Myron Stowe) [2135902]
+- PCI/PTM: Add pci_upstream_ptm() helper (Myron Stowe) [2135902]
+- PCI/PTM: Cache PTM Capability offset (Myron Stowe) [2135902]
+- PCI/DPC: Quirk PIO log size for certain Intel Root Ports (Myron Stowe) [2135902]
+- PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation (Myron Stowe) [2135902]
+- PCI/ASPM: Ignore L1 PM Substates if device lacks capability (Myron Stowe) [2135902]
+- PCI/ASPM: Factor out L1 PM Substates configuration (Myron Stowe) [2135902]
+- PCI/ASPM: Save L1 PM Substates Capability for suspend/resume (Myron Stowe) [2135902]
+- PCI/ASPM: Refactor L1 PM Substates Control Register programming (Myron Stowe) [2135902]
+- drm: Implement DRM aperture helpers under video/ (Myron Stowe) [2135902]
+- MAINTAINERS: Broaden scope of simpledrm entry (Myron Stowe) [2135902]
+- MAINTAINERS: Add simpledrm driver co-maintainer (Myron Stowe) [2135902]
+- PCI: qcom: Remove ddrss_sf_tbu clock from SC8180X (Myron Stowe) [2135902]
+- ARM: 9100/1: MAINTAINERS: mark all linux-arm-kernel@infradead list as moderated (Myron Stowe) [2135902]
+- PM: core: Remove static qualifier in DEFINE_SIMPLE_DEV_PM_OPS macro (Íñigo Huguet) [2147541]
+- x86/ftrace: remove return_to_handler SYM_FUNC_END macro (Joe Lawrence) [2144901]
+- dt-bindings: pinctrl: imx93: Add pinctrl binding (Steve Best) [2137921]
+- pinctrl: imx93: Add MODULE_DEVICE_TABLE() (Steve Best) [2137921]
+- ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set (John W. Linville) [2107254]
+- tools/testing/cxl: Fix decoder default state (John W. Linville) [2107254]
+- cxl/mbox: Use __le32 in get,set_lsa mailbox structures (John W. Linville) [2107254]
+- cxl: Fix cleanup of port devices on failure to probe driver. (John W. Linville) [2107254]
+- cxl/mem: Drop mem_enabled check from wait_for_media() (John W. Linville) [2107254]
+- cxl/pci: Make cxl_dvsec_ranges() failure not fatal to cxl_pci (John W. Linville) [2107254]
+- rehdat/configs:  set missing options relevant to CXL update (John W. Linville) [2107254]
+- cxl/pci: Drop shadowed variable (John W. Linville) [2107254]
+- cxl/core/port: Fix NULL but dereferenced coccicheck error (John W. Linville) [2107254]
+- cxl/port: Hold port reference until decoder release (John W. Linville) [2107254]
+- cxl/port: Fix endpoint refcount leak (John W. Linville) [2107254]
+- cxl/core: Fix cxl_device_lock() class detection (John W. Linville) [2107254]
+- cxl/core/port: Fix unregister_port() lock assertion (John W. Linville) [2107254]
+- cxl/regs: Fix size of CXL Capability Header Register (John W. Linville) [2107254]
+- cxl/core/port: Handle invalid decoders (John W. Linville) [2107254]
+- cxl/core/port: Fix / relax decoder target enumeration (John W. Linville) [2107254]
+- tools/testing/cxl: Add a physical_node link (John W. Linville) [2107254]
+- tools/testing/cxl: Enumerate mock decoders (John W. Linville) [2107254]
+- tools/testing/cxl: Mock one level of switches (John W. Linville) [2107254]
+- tools/testing/cxl: Fix root port to host bridge assignment (John W. Linville) [2107254]
+- tools/testing/cxl: Mock dvsec_ranges() (John W. Linville) [2107254]
+- cxl/core/port: Add endpoint decoders (John W. Linville) [2107254]
+- cxl/core: Move target_list out of base decoder attributes (John W. Linville) [2107254]
+- cxl/mem: Add the cxl_mem driver (John W. Linville) [2107254]
+- cxl/core/port: Add switch port enumeration (John W. Linville) [2107254]
+- cxl/memdev: Add numa_node attribute (John W. Linville) [2107254]
+- cxl/pci: Emit device serial number (John W. Linville) [2107254]
+- cxl/pci: Implement wait for media active (John W. Linville) [2107254]
+- cxl/pci: Retrieve CXL DVSEC memory info (John W. Linville) [2107254]
+- cxl/pci: Cache device DVSEC offset (John W. Linville) [2107254]
+- cxl/pci: Store component register base in cxlds (John W. Linville) [2107254]
+- cxl/core/port: Remove @host argument for dport + decoder enumeration (John W. Linville) [2107254]
+- cxl/port: Add a driver for 'struct cxl_port' objects (John W. Linville) [2107254]
+- cxl/core: Emit modalias for CXL devices (John W. Linville) [2107254]
+- cxl/core/hdm: Add CXL standard decoder enumeration to the core (John W. Linville) [2107254]
+- cxl/core: Generalize dport enumeration in the core (John W. Linville) [2107254]
+- cxl/pci: Rename pci.h to cxlpci.h (John W. Linville) [2107254]
+- cxl/port: Up-level cxl_add_dport() locking requirements to the caller (John W. Linville) [2107254]
+- cxl/pmem: Introduce a find_cxl_root() helper (John W. Linville) [2107254]
+- cxl/port: Introduce cxl_port_to_pci_bus() (John W. Linville) [2107254]
+- cxl/core/port: Use dedicated lock for decoder target list (John W. Linville) [2107254]
+- cxl: Prove CXL locking (John W. Linville) [2107254]
+- cxl/core: Track port depth (John W. Linville) [2107254]
+- cxl/core/port: Make passthrough decoder init implicit (John W. Linville) [2107254]
+- cxl/core: Fix cxl_probe_component_regs() error message (John W. Linville) [2107254]
+- cxl/core/port: Clarify decoder creation (John W. Linville) [2107254]
+- cxl/core: Convert decoder range to resource (John W. Linville) [2107254]
+- cxl/decoder: Hide physical address information from non-root (John W. Linville) [2107254]
+- cxl/core/port: Rename bus.c to port.c (John W. Linville) [2107254]
+- cxl: Introduce module_cxl_driver (John W. Linville) [2107254]
+- cxl/acpi: Map component registers for Root Ports (John W. Linville) [2107254]
+- cxl/pci: Add new DVSEC definitions (John W. Linville) [2107254]
+- cxl: Flesh out register names (John W. Linville) [2107254]
+- cxl/pci: Defer mailbox status checks to command timeouts (John W. Linville) [2107254]
+- cxl/pci: Implement Interface Ready Timeout (John W. Linville) [2107254]
+- cxl: Rename CXL_MEM to CXL_PCI (John W. Linville) [2107254]
+- ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT (John W. Linville) [2107254]
+- cxl/test: Mock acpi_table_parse_cedt() (John W. Linville) [2107254]
+- cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers (John W. Linville) [2107254]
+- cxl/pci: Use pci core's DVSEC functionality (John W. Linville) [2107254]
+- cxl/core: Replace unions with struct_group() (John W. Linville) [2107254]
+- PCI: Add pci_find_dvsec_capability to find designated VSEC (John W. Linville) [2107254]
+- net: remove noblock parameter from skb_recv_datagram() (Íñigo Huguet) [2143360]
+- net: ethernet: move from strlcpy with unused retval to strscpy (Ken Cox) [2104465]
+- e1000e: convert .adjfreq to .adjfine (Ken Cox) [2104465]
+- e1000e: remove unnecessary range check in e1000e_phc_adjfreq (Ken Cox) [2104465]
+- Revert "e1000e: Fix possible HW unit hang after an s0ix exit" (Ken Cox) [2104465]
+- e1000e: Enable GPT clock before sending message to CSME (Ken Cox) [2104465]
+- intel/e1000e:fix repeated words in comments (Ken Cox) [2104465]
+- intel: remove unused macros (Ken Cox) [2104465]
+- e1000e: Remove useless DMA-32 fallback configuration (Ken Cox) [2104465]
+
 * Tue Nov 29 2022 Frantisek Hrbata <fhrbata@redhat.com> [5.14.0-203.el9]
 - udp: Update reuse->has_conns under reuseport_lock. (Xin Long) [2135958]
 - udp: Remove redundant __udp_sysctl_init() call from udp_init(). (Xin Long) [2135958]
diff --git a/sources b/sources
index bcc832989..50a100d91 100644
--- a/sources
+++ b/sources
@@ -1,3 +1,3 @@
-SHA512 (linux-5.14.0-203.el9.tar.xz) = 32c517f9116dce5a5de4f12d435d13ee9163056bbe45859cfc4a1b6e82316c35f07daeec55bc563dea2b4da1a03a9bf9b39d25b0e7762cfa635e10697e6266c4
-SHA512 (kernel-abi-stablelists-5.14.0-203.el9.tar.bz2) = b5858b0e7fc23cd1e94bb4fd826c9b65d9e629e35e52f26e8091d3523b3ea0f583c3a5eb4a032af5593d4b61ff4b69404c6b88e834d8cab959db572d851fa728
-SHA512 (kernel-kabi-dw-5.14.0-203.el9.tar.bz2) = 3aff600593afa35e89015dec9a1391df3f6126d9f2d1c5daa15db2745d053aec470dab2772559e73b07c21af77c0f43ec560529a2e65086d7d9c0ff7dddf4c5b
+SHA512 (linux-5.14.0-204.el9.tar.xz) = ca9e3ac1d308298a0180a30dab0092dc26b31ea12c7e1dc30b6c7aa225176ce976bf7126fcc5e6de7589979ad7d7c774a6f712b93195c424d2ba1b80f67e651f
+SHA512 (kernel-abi-stablelists-5.14.0-204.el9.tar.bz2) = dc1c95fdcfa5e07bc5b115a6f87bcb78ee00b73a3007d7e0b06eeffa2c24fa4d3fde95c26325f9f12717f681c19be61492bd28de84438ba4cc2ca9826df5c6fc
+SHA512 (kernel-kabi-dw-5.14.0-204.el9.tar.bz2) = 3aff600593afa35e89015dec9a1391df3f6126d9f2d1c5daa15db2745d053aec470dab2772559e73b07c21af77c0f43ec560529a2e65086d7d9c0ff7dddf4c5b