f752e7dc92
* Fri Nov 19 2021 Juri Lelli <juri.lelli@redhat.com> [5.14.0-18.rt21.18.el9] - CI: Add template for baseline gcov build (c9s repos) (Michael Hofmann) - PCI: vmd: depend on !UML (Myron Stowe) [1994932] - PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU (Myron Stowe) [1994932] - PCI: vmd: Assign a number to each VMD controller (Myron Stowe) [1994932] - PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus (Myron Stowe) [1994932] - swiotlb-xen: drop DEFAULT_NSLABS (Jerry Snitselaar) [2004348] - swiotlb-xen: arrange to have buffer info logged (Jerry Snitselaar) [2004348] - swiotlb-xen: drop leftover __ref (Jerry Snitselaar) [2004348] - swiotlb-xen: limit init retries (Jerry Snitselaar) [2004348] - swiotlb-xen: suppress certain init retries (Jerry Snitselaar) [2004348] - swiotlb-xen: maintain slab count properly (Jerry Snitselaar) [2004348] - swiotlb-xen: fix late init retry (Jerry Snitselaar) [2004348] - swiotlb-xen: avoid double free (Jerry Snitselaar) [2004348] - dma-debug: teach add_dma_entry() about DMA_ATTR_SKIP_CPU_SYNC (Jerry Snitselaar) [2004348] - dma-debug: fix sg checks in debug_dma_map_sg() (Jerry Snitselaar) [2004348] - dma-mapping: fix the kerneldoc for dma_map_sgtable() (Jerry Snitselaar) [2004348] - dma-debug: prevent an error message from causing runtime problems (Jerry Snitselaar) [2004348] - dma-mapping: fix the kerneldoc for dma_map_sg_attrs (Jerry Snitselaar) [2004348] - iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses (Jerry Snitselaar) [2004348] - iommu: Clarify default domain Kconfig (Jerry Snitselaar) [2004348] - iommu/vt-d: Fix a deadlock in intel_svm_drain_prq() (Jerry Snitselaar) [2004348] - iommu/vt-d: Fix PASID leak in intel_svm_unbind_mm() (Jerry Snitselaar) [2004348] - iommu/amd: Remove iommu_init_ga() (Jerry Snitselaar) [2004348] - iommu/amd: Relocate GAMSup check to early_enable_iommus (Jerry Snitselaar) [2004348] - iommu/io-pgtable: Abstract iommu_iotlb_gather access (Jerry Snitselaar) [2004348] - iommu/vt-d: Add present bit check in pasid entry setup helpers (Jerry Snitselaar) [2004348] - iommu/vt-d: Use pasid_pte_is_present() helper function (Jerry Snitselaar) [2004348] - iommu/vt-d: Drop the kernel doc annotation (Jerry Snitselaar) [2004348] - iommu/vt-d: Allow devices to have more than 32 outstanding PRs (Jerry Snitselaar) [1921363] - iommu/vt-d: Preset A/D bits for user space DMA usage (Jerry Snitselaar) [2004348] - iomm/vt-d: Enable Intel IOMMU scalable mode by default (Jerry Snitselaar) [2004348] - iommu/vt-d: Refactor Kconfig a bit (Jerry Snitselaar) [2004348] - iommu/vt-d: Remove unnecessary oom message (Jerry Snitselaar) [2004348] - iommu/vt-d: Update the virtual command related registers (Jerry Snitselaar) [2004348] - iommu: Allow enabling non-strict mode dynamically (Jerry Snitselaar) [2004348] - iommu: Merge strictness and domain type configs (Jerry Snitselaar) [2004348] - iommu: Only log strictness for DMA domains (Jerry Snitselaar) [2004348] - iommu: Expose DMA domain strictness via sysfs (Jerry Snitselaar) [2004348] - iommu: Express DMA strictness via the domain type (Jerry Snitselaar) [2004348] - iommu/vt-d: Prepare for multiple DMA domain types (Jerry Snitselaar) [2004348] - iommu/arm-smmu: Prepare for multiple DMA domain types (Jerry Snitselaar) [2004348] - iommu/amd: Prepare for multiple DMA domain types (Jerry Snitselaar) [2004348] - iommu: Introduce explicit type for non-strict DMA domains (Jerry Snitselaar) [2004348] - iommu/io-pgtable: Remove non-strict quirk (Jerry Snitselaar) [2004348] - iommu: Indicate queued flushes via gather data (Jerry Snitselaar) [2004348] - iommu/dma: Remove redundant "!dev" checks (Jerry Snitselaar) [2004348] - iommu/virtio: Drop IOVA cookie management (Jerry Snitselaar) [2004348] - iommu/vt-d: Drop IOVA cookie management (Jerry Snitselaar) [2004348] - iommu/arm-smmu: Drop IOVA cookie management (Jerry Snitselaar) [2004348] - iommu/amd: Drop IOVA cookie management (Jerry Snitselaar) [2004348] - iommu: Pull IOVA cookie management into the core (Jerry Snitselaar) [2004348] - iommu/amd: Remove stale amd_iommu_unmap_flush usage (Jerry Snitselaar) [2004348] - iommu/amd: Use only natural aligned flushes in a VM (Jerry Snitselaar) [2004348] - iommu/amd: Sync once for scatter-gather operations (Jerry Snitselaar) [2004348] - iommu/amd: Tailored gather logic for AMD (Jerry Snitselaar) [2004348] - iommu: Factor iommu_iotlb_gather_is_disjoint() out (Jerry Snitselaar) [2004348] - iommu: Improve iommu_iotlb_gather helpers (Jerry Snitselaar) [2004348] - iommu/amd: Do not use flush-queue when NpCache is on (Jerry Snitselaar) [2004348] - iommu/amd: Selective flush on unmap (Jerry Snitselaar) [2004348] - iommu/amd: Fix printing of IOMMU events when rate limiting kicks in (Jerry Snitselaar) [2004348] - iommu/amd: Convert from atomic_t to refcount_t on pasid_state->count (Jerry Snitselaar) [2004348] - iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group() (Jerry Snitselaar) [2004348] - iommu/arm-smmu-v3: Stop pre-zeroing batch commands (Jerry Snitselaar) [2004348] - iommu/arm-smmu-v3: Extract reusable function __arm_smmu_cmdq_skip_err() (Jerry Snitselaar) [2004348] - iommu/arm-smmu-v3: Add and use static helper function arm_smmu_get_cmdq() (Jerry Snitselaar) [2004348] - iommu/arm-smmu-v3: Add and use static helper function arm_smmu_cmdq_issue_cmd_with_sync() (Jerry Snitselaar) [2004348] - iommu/arm-smmu-v3: Use command queue batching helpers to improve performance (Jerry Snitselaar) [2004348] - iommu/arm-smmu: Optimize ->tlb_flush_walk() for qcom implementation (Jerry Snitselaar) [2004348] - iommu/arm-smmu: Fix race condition during iommu_group creation (Jerry Snitselaar) [2004348] - iommu: Fix race condition during default domain allocation (Jerry Snitselaar) [2004348] - iommu/arm-smmu: Add clk_bulk_{prepare/unprepare} to system pm callbacks (Jerry Snitselaar) [2004348] - iommu/arm-smmu-v3: Remove some unneeded init in arm_smmu_cmdq_issue_cmdlist() (Jerry Snitselaar) [2004348] - iommu/arm-smmu-v3: Implement the map_pages() IOMMU driver callback (Jerry Snitselaar) [1971978] - iommu/arm-smmu-v3: Implement the unmap_pages() IOMMU driver callback (Jerry Snitselaar) [1971978] - iommu/vt-d: Move clflush'es from iotlb_sync_map() to map_pages() (Jerry Snitselaar) [1971978] - iommu/vt-d: Implement map/unmap_pages() iommu_ops callback (Jerry Snitselaar) [1971978] - iommu/vt-d: Report real pgsize bitmap to iommu core (Jerry Snitselaar) [1971978] - iommu: Streamline iommu_iova_to_phys() (Jerry Snitselaar) [2004348] - iommu: Remove mode argument from iommu_set_dma_strict() (Jerry Snitselaar) [2004348] - redhat/configs: Use new iommu default dma config options (Jerry Snitselaar) [2004348] - iommu/amd: Add support for IOMMU default DMA mode build options (Jerry Snitselaar) [2004348] - iommu/vt-d: Add support for IOMMU default DMA mode build options (Jerry Snitselaar) [2004348] - iommu: Enhance IOMMU default DMA mode build options (Jerry Snitselaar) [2004348] - iommu: Print strict or lazy mode at init time (Jerry Snitselaar) [2004348] - iommu: Deprecate Intel and AMD cmdline methods to enable strict mode (Jerry Snitselaar) [2004348] - iommu/arm-smmu: Implement the map_pages() IOMMU driver callback (Jerry Snitselaar) [1971978] - iommu/arm-smmu: Implement the unmap_pages() IOMMU driver callback (Jerry Snitselaar) [1971978] - iommu/io-pgtable-arm-v7s: Implement arm_v7s_map_pages() (Jerry Snitselaar) [1971978] - iommu/io-pgtable-arm-v7s: Implement arm_v7s_unmap_pages() (Jerry Snitselaar) [1971978] - iommu/io-pgtable-arm: Implement arm_lpae_map_pages() (Jerry Snitselaar) [1971978] - iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages() (Jerry Snitselaar) [1971978] - iommu/io-pgtable-arm: Prepare PTE methods for handling multiple entries (Jerry Snitselaar) [1971978] - iommu/io-pgtable: Introduce map_pages() as a page table op (Jerry Snitselaar) [1971978] - iommu/io-pgtable: Introduce unmap_pages() as a page table op (Jerry Snitselaar) [1971978] - iommu: Add support for the map_pages() callback (Jerry Snitselaar) [1971978] - iommu: Hook up '->unmap_pages' driver callback (Jerry Snitselaar) [1971978] - iommu: Split 'addr_merge' argument to iommu_pgsize() into separate parts (Jerry Snitselaar) [1971978] - iommu: Use bitmap to calculate page size in iommu_pgsize() (Jerry Snitselaar) [1971978] - iommu: Add a map_pages() op for IOMMU drivers (Jerry Snitselaar) [1971978] - iommu: Add an unmap_pages() op for IOMMU drivers (Jerry Snitselaar) [1971978] - swiotlb: use depends on for DMA_RESTRICTED_POOL (Jerry Snitselaar) [2004348] - swiotlb: Free tbl memory in swiotlb_exit() (Jerry Snitselaar) [2004348] - swiotlb: Emit diagnostic in swiotlb_exit() (Jerry Snitselaar) [2004348] - swiotlb: Convert io_default_tlb_mem to static allocation (Jerry Snitselaar) [2004348] - swiotlb: add overflow checks to swiotlb_bounce (Jerry Snitselaar) [2004348] - swiotlb: fix implicit debugfs declarations (Jerry Snitselaar) [2004348] - swiotlb: Add restricted DMA pool initialization (Jerry Snitselaar) [2004348] - redhat/configs: Add CONFIG_DMA_RESTRICTED_POOL (Jerry Snitselaar) [2004348] - swiotlb: Add restricted DMA alloc/free support (Jerry Snitselaar) [2004348] - swiotlb: Refactor swiotlb_tbl_unmap_single (Jerry Snitselaar) [2004348] - swiotlb: Move alloc_size to swiotlb_find_slots (Jerry Snitselaar) [2004348] - swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing (Jerry Snitselaar) [2004348] - swiotlb: Update is_swiotlb_active to add a struct device argument (Jerry Snitselaar) [2004348] - swiotlb: Update is_swiotlb_buffer to add a struct device argument (Jerry Snitselaar) [2004348] - swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used (Jerry Snitselaar) [2004348] - swiotlb: Refactor swiotlb_create_debugfs (Jerry Snitselaar) [2004348] - swiotlb: Refactor swiotlb init functions (Jerry Snitselaar) [2004348] - dma-mapping: make the global coherent pool conditional (Jerry Snitselaar) [2004348] - dma-mapping: add a dma_init_global_coherent helper (Jerry Snitselaar) [2004348] - dma-mapping: simplify dma_init_coherent_memory (Jerry Snitselaar) [2004348] - dma-mapping: allow using the global coherent pool for !ARM (Jerry Snitselaar) [2004348] - dma-direct: add support for dma_coherent_default_memory (Jerry Snitselaar) [2004348] - dma-mapping: return an unsigned int from dma_map_sg{,_attrs} (Jerry Snitselaar) [2004348] - dma-mapping: disallow .map_sg operations from returning zero on error (Jerry Snitselaar) [2004348] - dma-mapping: return error code from dma_dummy_map_sg() (Jerry Snitselaar) [2004348] - xen: swiotlb: return error code from xen_swiotlb_map_sg() (Jerry Snitselaar) [2004348] - s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR (Jerry Snitselaar) [2004348] - s390/pci: return error code from s390_dma_map_sg() (Jerry Snitselaar) [2004348] - powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR (Jerry Snitselaar) [2004348] - powerpc/iommu: return error code from .map_sg() ops (Jerry Snitselaar) [2004348] - iommu/dma: return error code from iommu_dma_map_sg() (Jerry Snitselaar) [2004348] - iommu: return full error code from iommu_map_sg[_atomic]() (Jerry Snitselaar) [2004348] - dma-direct: return appropriate error code from dma_direct_map_sg() (Jerry Snitselaar) [2004348] - dma-mapping: allow map_sg() ops to return negative error codes (Jerry Snitselaar) [2004348] - dma-debug: fix debugfs initialization order (Jerry Snitselaar) [2004348] - dma-debug: use memory_intersects() directly (Jerry Snitselaar) [2004348] Resolves: rhbz#2002474
48 lines
1.3 KiB
Makefile
48 lines
1.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 0
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 18
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|
|
|
|
RTBUILD:=.18
|