ea3a4e25b0
* Thu Oct 27 2022 Luis Claudio R. Goncalves <lgoncalv@redhat.com> [5.14.0-176.rt21.176.el9] - [rt] build kernel-rt-5.14.0-176.rt21.176.el9 [2125474] - tty/serial/omap: Make the locking RT aware (Juri Lelli) - printk: avoid preempt_disable() for PREEMPT_RT (Juri Lelli) - serial: 8250: implement write_atomic (Juri Lelli) - printk: add infrastucture for atomic consoles (Juri Lelli) - printk: Bring back the RT bits. (Juri Lelli) - printk: wake up all waiters (Juri Lelli) - printk: cpu sync always disable interrupts (Juri Lelli) - printk: remove leftovers from old RT/RHEL code (Luis Claudio R. Goncalves) - docs: translations: zn_CN: irq-affinity.rst: add a missing extension (David Arcari) [2117494] - docs/zh_CN: core-api: Update the translation of printk-basics.rst to 5.19-rc3 (David Arcari) [2117494] - docs/zh_CN: Modify the translator tag and fix the wrong word (David Arcari) [2117494] - MIPS/asm/printk: Fix build failure caused by printk (David Arcari) [2117494] - printk: do not wait for consoles when suspended (David Arcari) [2117494] - Revert "printk: add functions to prefer direct printing" (David Arcari) [2117494] - Revert "printk: add kthread console printers" (David Arcari) [2117494] - Revert "printk: extend console_lock for per-console locking" (David Arcari) [2117494] - Revert "printk: remove @console_locked" (David Arcari) [2117494] - Revert "printk: Block console kthreads when direct printing will be required" (David Arcari) [2117494] - Revert "printk: Wait for the global console lock when the system is going down" (David Arcari) [2117494] - printk: Wait for the global console lock when the system is going down (David Arcari) [2117494] - printk: Block console kthreads when direct printing will be required (David Arcari) [2117494] - Revert "printk: wake up all waiters" (David Arcari) [2117494] - printk, tracing: fix console tracepoint (David Arcari) [2117494] - printk: remove @console_locked (David Arcari) [2117494] - printk: extend console_lock for per-console locking (David Arcari) [2117494] - printk: add kthread console printers (David Arcari) [2117494] - printk: add functions to prefer direct printing (David Arcari) [2117494] - printk: add pr_flush() (David Arcari) [2117494] - printk: move buffer definitions into console_emit_next_record() caller (David Arcari) [2117494] - printk: refactor and rework printing logic (David Arcari) [2117494] - serial: core: Fix initializing and restoring termios speed (David Arcari) [2117494] - printk: add con_printk() macro for console details (David Arcari) [2117494] - printk: call boot_delay_msec() in printk_delay() (David Arcari) [2117494] - printk: get caller_id/timestamp after migration disable (David Arcari) [2117494] - printk: wake waiters for safe and NMI contexts (David Arcari) [2117494] - printk: wake up all waiters (David Arcari) [2117494] - printk: add missing memory barrier to wake_up_klogd() (David Arcari) [2117494] - printk: rename cpulock functions (David Arcari) [2117494] - printk: fix return value of printk.devkmsg __setup handler (David Arcari) [2117494] - printk: make suppress_panic_printk static (David Arcari) [2117494] - printk: Set console_set_on_cmdline=1 when __add_preferred_console() is called with user_specified == true (David Arcari) [2117494] - printk: Drop console_sem during panic (David Arcari) [2117494] - printk: Avoid livelock with heavy printk during panic (David Arcari) [2117494] - printk: disable optimistic spin during panic (David Arcari) [2117494] - printk: Add panic_in_progress helper (David Arcari) [2117494] - printk: Fix incorrect __user type in proc_dointvec_minmax_sysadmin() (David Arcari) [2117494] - printk: ringbuffer: Improve prb_next_seq() performance (David Arcari) [2117494] - printk: fix build warning when CONFIG_PRINTK=n (David Arcari) [2117494] - printk: move printk sysctl to printk/sysctl.c (David Arcari) [2117494] - printk/console: Clean up boot console handling in register_console() (David Arcari) [2117494] - printk/console: Remove need_default_console variable (David Arcari) [2117494] - printk/console: Remove unnecessary need_default_console manipulation (David Arcari) [2117494] - printk/console: Rename has_preferred_console to need_default_console (David Arcari) [2117494] - printk/console: Split out code that enables default console (David Arcari) [2117494] - printk: use gnu_printf format attribute for printk_sprint() (David Arcari) [2117494] - printk: avoid -Wsometimes-uninitialized warning (David Arcari) [2117494] - printk: use kvmalloc instead of kmalloc for devkmsg_user (David Arcari) [2117494] - printk/index: Fix -Wunused-function warning (David Arcari) [2117494] - printk: Add printk.console_no_auto_verbose boot parameter (David Arcari) [2117494] - printk: Move the printk() kerneldoc comment to its new home (David Arcari) [2117494] - printk/index: Fix warning about missing prototypes (David Arcari) [2117494] - redhat/configs: enable CONFIG_PRINTK_INDEX (David Arcari) [2117494] - printk: Userspace format indexing support (David Arcari) [2117494] - printk: Rework parse_prefix into printk_parse_prefix (David Arcari) [2117494] - printk: Straighten out log_flags into printk_info_flags (David Arcari) [2117494] - printk/console: Check consistent sequence number when handling race in console_unlock() (David Arcari) [2117494] - serial/8250: Use fifo in 8250 console driver (David Arcari) [2117494] - serial: 8250_omap: Handle optional overrun-throttle-ms property (David Arcari) [2117494] - serial: omap: Disable PM runtime autoidle to remove pm_runtime_irq_safe() (David Arcari) [2117494] - rhel: Enable imx8 pinctrl devices (Al Stone) [2071845] - pinctrl: Don't allow PINCTRL_AMD to be a module (Al Stone) [2071845] - pinctrl: imx: Add the zero base flag for imx93 (Al Stone) [2071845] - pinctrl: intel: Fix kernel doc format, i.e. add return sections (Al Stone) [2071845] - pinctrl: freescale: Add i.MXRT1170 pinctrl driver support (Al Stone) [2071845] - pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl (Al Stone) [2071845] - pinctrl: intel: make irq_chip immutable (Al Stone) [2071845] - pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask() (Al Stone) [2071845] - pinctrl: lynxpoint: make irq_chip immutable (Al Stone) [2071845] - pinctrl: cherryview: make irq_chip immutable (Al Stone) [2071845] - pinctrl: baytrail: make irq_chip immutable (Al Stone) [2071845] - pinctrl: broxton: Add module alias for Intel Apollo Lake (Al Stone) [2071845] - pinctrl: tegra: tegra194: drop unused pin groups (Al Stone) [2071845] - pinctrl: thunderbay: Use devm_platform_ioremap_resource() (Al Stone) [2071845] - pinctrl: amd: Make the irqchip immutable (Al Stone) [2071845] - pinctrl: imx: Reduce printk message level for empty nodes (Al Stone) [2071845] - pinctrl: pinconf-generic: Print arguments for bias-pull-* (Al Stone) [2071845] - pinctrl: imx93: Add pinctrl driver support (Al Stone) [2071845] - pinctrl: baytrail: Add pinconf group + function for the pmu_clk (Al Stone) [2071845] - pinctrl: icelake: Add Ice Lake-N PCH pin controller support (Al Stone) [2071845] - pinctrl: baytrail: Clear direct_irq_en flag on broken configs (Al Stone) [2071845] - pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping (Al Stone) [2071845] - pinctrl: thunderbay: rework loops looking for groups names (Al Stone) [2071845] - pinctrl: thunderbay: comment process of building functions a bit (Al Stone) [2071845] - pinctrl: imx: fix assigning groups names (Al Stone) [2071845] - pinctrl: imx: fix allocation result check (Al Stone) [2071845] - pinctrl: add one more "const" for generic function groups (Al Stone) [2071845] - pinctrl: keembay: rework loops looking for groups names (Al Stone) [2071845] - pinctrl: keembay: comment process of building functions a bit (Al Stone) [2071845] - pinctrl: imx: prepare for making "group_names" in "function_desc" const (Al Stone) [2071845] - pinctrl: Add Intel Thunder Bay pinctrl driver (Al Stone) [2071845] - pinctrl: freescale: Add i.MXRT1050 pinctrl driver support (Al Stone) [2071845] - pinctrl: cherryview: Use temporary variable for struct device (Al Stone) [2071845] - pinctrl: cherryview: Do not allow the same interrupt line to be used by 2 pins (Al Stone) [2071845] - pinctrl: cherryview: Don't use selection 0 to mark an interrupt line as unused (Al Stone) [2071845] - pinctrl: baytrail: Set IRQCHIP_SET_TYPE_MASKED flag on the irqchip (Al Stone) [2071845] - pinctrl: tegra194: remove duplicate initializer again (Al Stone) [2071845] - pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group() (Al Stone) [2071845] - pinctrl: pinconf-generic: Add support for "output-impedance-ohms" to be extracted from DT files (Al Stone) [2071845] - pinctrl: tegra: Fix warnings and error (Al Stone) [2071845] - pinctrl: tegra: Use correct offset for pin group (Al Stone) [2071845] - pinctrl: core: fix possible memory leak in pinctrl_enable() (Al Stone) [2071845] - pinctrl: tegra: Add pinmux support for Tegra194 (Al Stone) [2071845] - pinctrl: tegra: include lpdr pin properties (Al Stone) [2071845] - pinctrl: amd: disable and mask interrupts on probe (Al Stone) [2071845] - pinctrl: Fix spelling mistake "atleast" -> "at least" (Al Stone) [2071845] - pinctrl: core: Remove duplicated word from devm_pinctrl_unregister() (Al Stone) [2071845] - pinctrl: Add Intel Keem Bay pinctrl driver (Al Stone) [2071845] - pinctrl: single: Move test PCS_HAS_PINCONF in pcs_parse_bits_in_pinctrl_entry() to the beginning (Al Stone) [2071845] - pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry() (Al Stone) [2071845] - pinctrl: imx8dxl: Constify imx_pinctrl_soc_info (Al Stone) [2071845] - pinctrl: imx8qxp: Constify imx_pinctrl_soc_info (Al Stone) [2071845] - pinctrl: imx8mn: Constify imx_pinctrl_soc_info (Al Stone) [2071845] - pinctrl: imx8ulp: Initialize pin_reg (Al Stone) [2071845] - pinctrl: imx8ulp: Add pinctrl driver support (Al Stone) [2071845] - inotify: show inotify mask flags in proc fdinfo (Andrey Albershteyn) [2125133] - fsnotify: fix fsnotify hooks in pseudo filesystems (Andrey Albershteyn) [2090079] - fsnotify: invalidate dcache before IN_DELETE event (Andrey Albershteyn) [2090079] - scsi: target: core: De-RCU of se_lun and se_lun acl (Maurizio Lombardi) [2129900] - scsi: target: core: Fix race during ACL removal (Maurizio Lombardi) [2129900] - scsi: target: Remove XDWRITEREAD emulated support (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Do not require target authentication (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Allow AuthMethod=None (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Support base64 in CHAP (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Add support for extended CDB AHS (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Fix clang -Wformat warnings (Maurizio Lombardi) [2129900] - scsi: target: Detect UNMAP support post configuration (Maurizio Lombardi) [2129900] - scsi: target: Add file configure_unmap callout (Maurizio Lombardi) [2129900] - scsi: target: Add iblock configure_unmap callout (Maurizio Lombardi) [2129900] - scsi: target: Add callout to configure UNMAP settings (Maurizio Lombardi) [2129900] - scsi: target: Remove incorrect zero blocks WRITE_SAME check (Maurizio Lombardi) [2129900] - scsi: target: Remove duplicate "the" (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Fix NULL pointer dereference in iscsi_conn_auth_required() (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Control authentication per ACL (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Extract auth functions (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Add upcast helpers (Maurizio Lombardi) [2129900] - scsi: target: Fix WRITE_SAME No Data Buffer crash (Maurizio Lombardi) [2129900] - scsi: target: tcmu: Avoid holding XArray lock when calling lock_page (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Rename iscsi_session to iscsit_session (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Rename iscsi_conn to iscsit_conn (Maurizio Lombardi) [2129900] - scsi: target: iscsi: Rename iscsi_cmd to iscsit_cmd (Maurizio Lombardi) [2129900] - scsi: target: tcmu: Fix possible data corruption (Maurizio Lombardi) [2129900] - scsi: target: core: Silence the message about unknown VPD pages (Maurizio Lombardi) [2129900] - scsi: target: Fix incorrect use of cpumask_t (Maurizio Lombardi) [2129900] - scsi: target: Add iscsi/cpus_allowed_list in configfs (Maurizio Lombardi) [2129900] - random: trigger reseeding DRBG on more occasions (Daiki Ueno) [2131988] - Revert RT changes from core printk code (Luis Claudio R. Goncalves) Resolves: rhbz#2125474 Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
70 lines
2.3 KiB
Makefile
70 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 176
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|
|
|
|
RTBUILD:=.176
|