The Linux Realtime kernel
9c2ae77fd6
* Tue May 24 2022 Fernando Pacheco <fpacheco@redhat.com> [5.14.0-98.rt21.98.el9] - [rt] build kernel-rt-5.14.0-98.rt21.98.el9 [2061574] - hv_balloon: rate-limit "Unhandled message" warning (Vitaly Kuznetsov) [2088401] - scsi: qla2xxx: Fix typos in comments (Nilesh Javali) [2046623] - scsi: qla2xxx: Update version to 10.02.07.400-k (Nilesh Javali) [2046623] - scsi: qla2xxx: Increase max limit of ql2xnvme_queues (Nilesh Javali) [2046623] - scsi: qla2xxx: Use correct feature type field during RFF_ID processing (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix stuck session of PRLI reject (Nilesh Javali) [2046623] - scsi: qla2xxx: Reduce false trigger to login (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix laggy FC remote port session recovery (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix hang due to session stuck (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix N2N inconsistent PLOGI (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix crash during module load unload test (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix loss of NVMe namespaces after driver reload test (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix incorrect reporting of task management failure (Nilesh Javali) [2046623] - scsi: qla2xxx: Use named initializers for q_dev_state (Nilesh Javali) [2046623] - scsi: qla2xxx: Use named initializers for port_[d]state_str (Nilesh Javali) [2046623] - scsi: qla2xxx: Stop using the SCSI pointer (Nilesh Javali) [2046623] - scsi: qla2xxx: Remove unused qla_sess_op_cmd_list from scsi_qla_host_t (Nilesh Javali) [2046623] - scsi: qla2xxx: Add qla2x00_async_done() for async routines (Nilesh Javali) [2046623] - scsi: qla2xxx: Update version to 10.02.07.300-k (Nilesh Javali) [2046623] - scsi: qla2xxx: Check for firmware dump already collected (Nilesh Javali) [2046623] - scsi: qla2xxx: Add devids and conditionals for 28xx (Nilesh Javali) [2046623] - scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair() (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix clang warning (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix warning for missing error code (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix device reconnect in loop topology (Nilesh Javali) [2046623] - scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix wrong FDMI data for 64G adapter (Nilesh Javali) [2046623] - scsi: qla2xxx: Add retry for exec firmware (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix scheduling while atomic (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix premature hw access after PCI error (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix warning message due to adisc being flushed (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix stuck session in gpdb (Nilesh Javali) [2046623] - scsi: qla2xxx: Implement ref count for SRB (Nilesh Javali) [2046623] - scsi: qla2xxx: Refactor asynchronous command initialization (Nilesh Javali) [2046623] - scsi: qla2xxx: Synchronize rport dev_loss_tmo setting (Nilesh Javali) [2046623] - scsi: qla2xxx: Format log strings only if needed (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix off by one bug in qla_edif_app_getfcinfo() (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id() (Nilesh Javali) [2046623] - scsi: qla2xxx: Update version to 10.02.07.200-k (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix EDIF bsg (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix inconsistent check of db_flags (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Increase ELS payload (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Reduce connection thrash (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Tweak trace message (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Replace list_for_each_safe with list_for_each_entry_safe (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Flush stale events and msgs on session down (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix app start delay (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix app start fail (Nilesh Javali) [2046623] - scsi: qla2xxx: Turn off target reset during issue_lip (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix gnl list corruption (Nilesh Javali) [2046623] - scsi: qla2xxx: Relogin during fabric disturbance (Nilesh Javali) [2046623] - qla2xxx: add ->map_queues support for nvme (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix unmap of already freed sgl (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() (Nilesh Javali) [2046623] - scsi: qla2xxx: Return -ENOMEM if kzalloc() fails (Nilesh Javali) [2046623] - scsi: qla2xxx: Remove a declaration (Nilesh Javali) [2046623] - scsi: target: qla2xxx: Replace enable attr with ops.enable (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix excessive messages during device logout (Nilesh Javali) [2046623] - scsi: qla2xxx: Restore initiator in dual mode (Nilesh Javali) [2046623] - scsi: qla2xxx: Remove redundant initialization of pointer req (Nilesh Javali) [2046623] - scsi: qla2xxx: Update version to 10.02.07.100-k (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix use after free in eh_abort path (Nilesh Javali) [2046623] - scsi: qla2xxx: Move heartbeat handling from DPC thread to workqueue (Nilesh Javali) [2046623] - scsi: qla2xxx: Call process_response_queue() in Tx path (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix kernel crash when accessing port_speed sysfs file (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Use link event to wake up app (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix crash in NVMe abort path (Nilesh Javali) [2046623] - scsi: qla2xxx: Check for firmware capability before creating QPair (Nilesh Javali) [2046623] - scsi: qla2xxx: Display 16G only as supported speeds for 3830c card (Nilesh Javali) [2046623] - scsi: qla2xxx: Add support for mailbox passthru (Nilesh Javali) [2046623] - scsi: qla2xxx: Open-code qla2xxx_eh_device_reset() (Nilesh Javali) [2046623] - scsi: qla2xxx: Open-code qla2xxx_eh_target_reset() (Nilesh Javali) [2046623] - scsi: qla2xxx: Do not call fc_block_scsi_eh() during bus reset (Nilesh Javali) [2046623] - scsi: qla2xxx: Update version to 10.02.06.200-k (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix returnvar.cocci warnings (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix NVMe session down detection (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix NVMe retry (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix hang on NVMe command timeouts (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix NVMe | FCP personality change (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Do secure PLOGI when auth app is present (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add N2N support for EDIF (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix hang during NVMe session tear down (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix EDIF enable flag (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Reject AUTH ELS on session down (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Fix stale session (Nilesh Javali) [2046623] - scsi: qla2xxx: Update version to 10.02.06.100-k (Nilesh Javali) [2046623] - scsi: qla2xxx: Sync queue idx with queue_pair_map idx (Nilesh Javali) [2046623] - scsi: qla2xxx: Changes to support kdump kernel for NVMe BFS (Nilesh Javali) [2046623] - scsi: qla2xxx: Changes to support kdump kernel (Nilesh Javali) [2046623] - scsi: qla2xxx: Suppress unnecessary log messages during login (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix NPIV create erroneous error (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix unsafe removal from linked list (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix port type info (Nilesh Javali) [2046623] - scsi: qla2xxx: Add debug print of 64G link speed (Nilesh Javali) [2046623] - scsi: qla2xxx: Show OS name and version in FDMI-1 (Nilesh Javali) [2046623] - scsi: qla2xxx: Changes to support FCP2 Target (Nilesh Javali) [2046623] - scsi: qla2xxx: Adjust request/response queue size for 28xx (Nilesh Javali) [2046623] - scsi: qla2xxx: Add host attribute to trigger MPI hang (Nilesh Javali) [2046623] - scsi: qla2xxx: Remove redundant initialization of variable num_cnt (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix use after free in debug code (Nilesh Javali) [2046623] - scsi: qla2xxx: Fix spelling mistakes "allloc" -> "alloc" (Nilesh Javali) [2046623] - scsi: qla2xxx: Update version to 10.02.00.107-k (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Increment command and completion counts (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add encryption to I/O path (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add doorbell notification for app (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add detection of secure device (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add authentication pass + fail bsgs (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add key update (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add extraction of auth_els from the wire (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add send, receive, and accept for auth_els (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs (Nilesh Javali) [2046623] - scsi: qla2xxx: edif: Add start + stop bsgs (Nilesh Javali) [2046623] - scsi: qla2xxx: Remove unused variable 'status' (Nilesh Javali) [2046623] - scsi: qla2xxx: Remove redundant continue statement in a for-loop (Nilesh Javali) [2046623] - KVM: s390: pv: make use of ultravisor AIV support (Thomas Huth) [2044300] Resolves: rhbz#2061574, rhbz#2088401, rhbz#2046623, rhbz#2044300 Signed-off-by: Fernando Pacheco <fpacheco@redhat.com> |
||
|---|---|---|
| .gitignore | ||
| check-kabi | ||
| cpupower.config | ||
| cpupower.service | ||
| filter-aarch64.sh.rhel | ||
| filter-armv7hl.sh.rhel | ||
| filter-i686.sh.rhel | ||
| filter-modules.sh.rhel | ||
| filter-ppc64le.sh.rhel | ||
| filter-s390x.sh.rhel | ||
| filter-x86_64.sh.rhel | ||
| gating.yaml | ||
| generate_all_configs.sh | ||
| kernel-local | ||
| kernel-rt-x86_64-debug-rhel.config | ||
| kernel-rt-x86_64-rhel.config | ||
| kernel.spec | ||
| kvm_stat.logrotate | ||
| linux-kernel-test.patch | ||
| Makefile.rhelver | ||
| merge.pl | ||
| mod-denylist.sh | ||
| mod-extra.list.rhel | ||
| mod-internal.list | ||
| mod-kvm.list | ||
| mod-sign.sh | ||
| parallel_xz.sh | ||
| partial-kgcov-snip.config | ||
| patch-5.14.0-redhat.patch | ||
| process_configs.sh | ||
| README.rst | ||
| rheldup3.x509 | ||
| rhelkpatch1.x509 | ||
| rpminspect.yaml | ||
| sources | ||
| update_scripts.sh | ||
| x509.genkey.centos | ||
| x509.genkey.rhel | ||
=================== The Kernel dist-git =================== The kernel is maintained in a `source tree`_ rather than directly in dist-git. The specfile is maintained as a `template`_ in the source tree along with a set of build scripts to generate configurations, (S)RPMs, and to populate the dist-git repository. The `documentation`_ for the source tree covers how to contribute and maintain the tree. If you're looking for the downstream patch set it's available in the source tree with "git log master..ark-patches" or `online`_. Each release in dist-git is tagged in the source repository so you can easily check out the source tree for a build. The tags are in the format name-version-release, but note release doesn't contain the dist tag since the source can be built in different build roots (Fedora, CentOS, etc.) .. _source tree: https://gitlab.com/cki-project/kernel-ark.git .. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template .. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home .. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches