kernel-rt/Makefile.rhelver
Luis Claudio R. Goncalves 9a36615dc7 kernel-rt-5.14.0-164.rt21.164.el9
* Wed Sep 14 2022 Luis Claudio R. Goncalves <lgoncalv@redhat.com> [5.14.0-164.rt21.164.el9]
- [rt] build kernel-rt-5.14.0-164.rt21.164.el9 [2125474]
- nvmem: core: Check input parameter for NULL in nvmem_unregister() (David Arcari) [2124820]
- dt-bindings: PCI: qcom: Fix reset conditional (Myron Stowe) [2118429]
- PCI/ASPM: Remove pcie_aspm_pm_state_change() (Myron Stowe) [2118429]
- x86/PCI: Revert "x86/PCI: Clip only host bridge windows for E820 regions" (Myron Stowe) [2118429]
- Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs" (Myron Stowe) [2118429]
- Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators" (Myron Stowe) [2118429]
- Revert "PCI: brcmstb: Add control of subdevice voltage regulators" (Myron Stowe) [2118429]
- Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend" (Myron Stowe) [2118429]
- PCI: versatile: Remove redundant variable retval (Myron Stowe) [2118429]
- PCI: rockchip: Fix find_first_zero_bit() limit (Myron Stowe) [2118429]
- dt-bindings: PCI: qcom: Add schema for sc7280 chipset (Myron Stowe) [2118429]
- dt-bindings: PCI: qcom: Specify reg-names explicitly (Myron Stowe) [2118429]
- dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms (Myron Stowe) [2118429]
- dt-bindings: PCI: qcom: Convert to YAML (Myron Stowe) [2118429]
- dt-bindings: PCI: update references to Designware schema (Myron Stowe) [2118429]
- PCI: qcom: Fix unbalanced PHY init on probe errors (Myron Stowe) [2118429]
- PCI: qcom: Fix runtime PM imbalance on probe errors (Myron Stowe) [2118429]
- PCI: qcom: Fix pipe clock imbalance (Myron Stowe) [2118429]
- PCI: qcom: Add SM8150 SoC support (Myron Stowe) [2118429]
- dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC (Myron Stowe) [2118429]
- PCI: mvebu: Add support for sending Set_Slot_Power_Limit message (Myron Stowe) [2118429]
- PCI: Add function for parsing 'slot-power-limit-milliwatt' DT property (Myron Stowe) [2118429]
- PCI: Add PCI_EXP_SLTCTL_ASPL_DISABLE macro (Myron Stowe) [2118429]
- PCI: microchip: Fix potential race in interrupt handling (Myron Stowe) [2118429]
- PCI: microchip: Add missing chained_irq_enter()/exit() calls (Myron Stowe) [2118429]
- PCI: microchip: Add a missing semicolon (Myron Stowe) [2118429]
- PCI: mediatek-gen3: Assert resets to ensure expected init state (Myron Stowe) [2118429]
- PCI: mediatek: Fix refcount leak in mtk_pcie_subsys_powerup() (Myron Stowe) [2118429]
- dt-bindings: pci: layerscape-pci: define AER/PME interrupts (Myron Stowe) [2118429]
- dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for ls1028a (Myron Stowe) [2118429]
- dt-bindings: pci: layerscape-pci: Update the description of SCFG property (Myron Stowe) [2118429]
- dt-bindings: pci: layerscape-pci: Add a optional property big-endian (Myron Stowe) [2118429]
- PCI: imx6: Fix PERST# start-up sequence (Myron Stowe) [2118429]
- PCI: rockchip-dwc: Add legacy interrupt support (Myron Stowe) [2118429]
- PCI: rockchip-dwc: Reset core at driver probe (Myron Stowe) [2118429]
- dt-bindings: PCI: Remove fallback from Rockchip DesignWare binding (Myron Stowe) [2118429]
- PCI: qcom-ep: Move enable/disable resources code to common functions (Myron Stowe) [2118429]
- PCI: tegra194: Remove unnecessary MSI enable reg save and restore (Myron Stowe) [2118429]
- PCI: dwc: Fix setting error return on MSI DMA mapping failure (Myron Stowe) [2118429]
- PCI: cadence: Clear FLR in device capabilities register (Myron Stowe) [2118429]
- PCI: cadence: Allow PTM Responder to be enabled (Myron Stowe) [2118429]
- PCI: cadence: Fix find_first_zero_bit() limit (Myron Stowe) [2118429]
- PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() (Myron Stowe) [2118429]
- x86/PCI: Disable E820 reserved region clipping starting in 2023 (Myron Stowe) [2118429]
- x86/PCI: Disable E820 reserved region clipping via quirks (Myron Stowe) [2118429]
- x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions (Myron Stowe) [2118429]
- x86/PCI: Clip only host bridge windows for E820 regions (Myron Stowe) [2118429]
- x86: Log resource clipping for E820 regions (Myron Stowe) [2118429]
- x86/PCI: Eliminate remove_e820_regions() common subexpressions (Myron Stowe) [2118429]
- PCI/PM: Replace pci_set_power_state() in pci_pm_thaw_noirq() (Myron Stowe) [2118429]
- PCI/PM: Rearrange pci_set_power_state() (Myron Stowe) [2118429]
- PCI/PM: Clean up pci_set_low_power_state() (Myron Stowe) [2118429]
- PCI/PM: Do not restore BARs if device is not in D0 (Myron Stowe) [2118429]
- PCI/PM: Split pci_power_up() (Myron Stowe) [2118429]
- PCI/PM: Write 0 to PMCSR in pci_power_up() in all cases (Myron Stowe) [2118429]
- PCI/PM: Do not call pci_update_current_state() from pci_power_up() (Myron Stowe) [2118429]
- PCI/PM: Unfold pci_platform_power_transition() in pci_power_up() (Myron Stowe) [2118429]
- PCI/PM: Set current_state to D3cold if the device is not accessible (Myron Stowe) [2118429]
- PCI/PM: Relocate pci_set_low_power_state() (Myron Stowe) [2118429]
- PCI/PM: Split pci_raw_set_power_state() (Myron Stowe) [2118429]
- PCI/PM: Rearrange pci_update_current_state() (Myron Stowe) [2118429]
- PCI/PM: Drop the runtime_d3cold device flag (Myron Stowe) [2118429]
- PCI/PM: Resume subordinate bus in bus type callbacks (Myron Stowe) [2118429]
- PCI/PM: Power up all devices during runtime resume (Myron Stowe) [2118429]
- PCI/PM: Define pci_restore_standard_config() only for CONFIG_PM_SLEEP (Myron Stowe) [2118429]
- PCI/P2PDMA: Whitelist Intel Skylake-E Root Ports at any devfn (Myron Stowe) [2118429]
- PCI/doc: Update obsolete pci_set_dma_mask() references (Myron Stowe) [2118429]
- PCI/doc: cleanup references to the legacy PCI DMA API (Myron Stowe) [2118429]
- PCI: hotplug: Clean up include files (Myron Stowe) [2118429]
- PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits (Myron Stowe) [2118429]
- PCI/ASPM: Make Intel DG2 L1 acceptable latency unlimited (Myron Stowe) [2118429]
- PCI: Export pci_dev_lock() (Myron Stowe) [2118429]
- vfio/type1: Unpin zero pages (Alex Williamson) [2121855]
- platform/x86/intel/vsec: Fix wrong type for local status variables (David Arcari) [2076745]
- platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT (David Arcari) [2076745]
- platform/x86/intel/pmt: telemetry: Fix fixed region handling (David Arcari) [2076745]
- platform/x86/intel/vsec: Add support for Raptor Lake (David Arcari) [2076745]
- platform/x86/intel/vsec: Rework early hardware code (David Arcari) [2076745]
- platform/x86/intel: Fix pmt_crashlog array reference (David Arcari) [2076745]
- platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver (David Arcari) [2072655]
- platform/x86/intel: pmc: Support Intel Raptorlake P (David Arcari) [2072655]
- platform/x86/intel: pmc/core: Use kobj_to_dev() (David Arcari) [2072655]
- platform/x86/intel: pmc/core: change pmc_lpm_modes to static (David Arcari) [2072655]
- platform/x86: intel_pmc_core: fix memleak on registration failure (David Arcari) [2072655]
- iommu/vt-d: Make DMAR_UNITS_SUPPORTED default 1024 (Jerry Snitselaar) [2120411]
- Revert "iommu/vt-d: Make DMAR_UNITS_SUPPORTED a config setting" (Jerry Snitselaar) [2120411]
- Revert "rhel config: Set DMAR_UNITS_SUPPORTED" (Jerry Snitselaar) [2120411]
- iavf: Fix reset error handling (Petr Oros) [2119712]
- iavf: Fix NULL pointer dereference in iavf_get_link_ksettings (Petr Oros) [2119712]
- iavf: Fix missing state logs (Petr Oros) [2119712]
Resolves: rhbz#2125474

Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
2022-09-14 13:31:29 -03:00

70 lines
2.3 KiB
Makefile

RHEL_MAJOR = 9
RHEL_MINOR = 2
#
# RHEL_RELEASE
# -------------
#
# Represents build number in 'release' part of RPM's name-version-release.
# name is <package_name>, e.g. kernel
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 164
#
# ZSTREAM
# -------
#
# This variable controls whether we use zstream numbering or not for the
# package release. The zstream release keeps the build number of the last
# build done for ystream for the Beta milestone, and increments a second
# number for each build. The third number is used for branched builds
# (eg.: for builds with security fixes or hot fixes done outside of the
# batch release process).
#
# For example, with ZSTREAM unset or set to "no", all builds will contain
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
# where X is the build number. With ZSTREAM set to "yes", we will have
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
# build number and Z will always be 1 except if you're doing a branched build
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
# number will be incremented instead of the Y).
#
ZSTREAM ?= no
#
# Early y+1 numbering
# --------------------
#
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
# First is RHEL_RELEASE inherited/merged from y as-is, second number
# is incremented with each build starting from 1. After merge from y,
# it resets back to 1. This way y+1 nvr reflects status of last merge.
#
# Example:
#
# rhel8.0 rhel-8.1
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
# kernel-4.18.0-58.2.el8
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
# kernel-4.18.0-60.el8
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
#
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
EARLY_YSTREAM ?= no
EARLY_YBUILD:=
EARLY_YRELEASE:=
ifneq ("$(ZSTREAM)", "yes")
ifeq ("$(EARLY_YSTREAM)","yes")
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
endif
endif
RTBUILD:=.164