3aef7e64f2
* Thu Jan 19 2023 Luis Claudio R. Goncalves <lgoncalv@redhat.com> [5.14.0-239.rt14.240.el9] - [rt] build kernel-rt-5.14.0-239.rt14.240.el9 [2125474] - NFSD: fix use-after-free on source server when doing inter-server copy (Jeffrey Layton) [2138605] - Revert "SUNRPC: Use RMW bitops in single-threaded hot paths" (Jeffrey Layton) [2138605] - nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure (Jeffrey Layton) [2138605] - nfsd: fix handling of cached open files in nfsd4_open codepath (Jeffrey Layton) [2152473] - nfsd: fix handling of readdir in v4root vs. mount upcall timeout (Jeffrey Layton) [2152996] - nfsd: shut down the NFSv4 state objects before the filecache (Jeffrey Layton) [2138605] - nfsd: rework refcounting in filecache (Jeffrey Layton) [2138605] - nfsd: return error if nfs4_setacl fails (Jeffrey Layton) [2138321] - NFSD: pass range end to vfs_fsync_range() instead of count (Jeffrey Layton) [2138605] - NFSD: Add an nfsd_file_fsync tracepoint (Jeffrey Layton) [2138605] - nfsd: fix up the filecache laundrette scheduling (Jeffrey Layton) [2138605] - nfsd: reorganize filecache.c (Jeffrey Layton) [2138605] - nfsd: remove the pages_flushed statistic from filecache (Jeffrey Layton) [2138605] - NFSD: Fix licensing header in filecache.c (Jeffrey Layton) [2138605] - NFSD: Use rhashtable for managing nfs4_file objects (Jeffrey Layton) [2138605] - nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_file_cache_stats_fops (Jeffrey Layton) [2138605] - nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_reply_cache_stats_fops (Jeffrey Layton) [2138605] - nfsd: use DEFINE_SHOW_ATTRIBUTE to define export_features_fops and supported_enctypes_fops (Jeffrey Layton) [2138605] - NFSD: Refactor find_file() (Jeffrey Layton) [2138605] - NFSD: Clean up find_or_add_file() (Jeffrey Layton) [2138605] - NFSD: Add a nfsd4_file_hash_remove() helper (Jeffrey Layton) [2138605] - NFSD: Clean up nfsd4_init_file() (Jeffrey Layton) [2138605] - NFSD: Update file_hashtbl() helpers (Jeffrey Layton) [2138605] - NFSD: Use const pointers as parameters to fh_ helpers (Jeffrey Layton) [2138605] - NFSD: Trace delegation revocations (Jeffrey Layton) [2138605] - NFSD: Clean up nfs4_preprocess_stateid_op() call sites (Jeffrey Layton) [2138605] - NFSD: Flesh out a documenting comment for filecache.c (Jeffrey Layton) [2138605] - NFSD: Add an NFSD_FILE_GC flag to enable nfsd_file garbage collection (Jeffrey Layton) [2138605] - NFSD: Revert "NFSD: NFSv4 CLOSE should release an nfsd_file immediately" (Jeffrey Layton) [2138605] - NFSD: Pass the target nfsd_file to nfsd_commit() (Jeffrey Layton) [2138605] - nfsd: don't call nfsd_file_put from client states seqfile display (Jeffrey Layton) [2138357] - net: ethernet: move from strlcpy with unused retval to strscpy (Ken Cox) [2104472] - ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter (Ken Cox) [2104472] - ixgbe: Manual AN-37 for troublesome link partners for X550 SFI (Ken Cox) [2104472] - ixgbe: Don't call kmap() on page allocated with GFP_ATOMIC (Ken Cox) [2104472] - ixgbe: convert .adjfreq to .adjfine (Ken Cox) [2104472] - ixgbe: drop unexpected word 'for' in comments (Ken Cox) [2104472] - ixgbe: remove unexpected word "the" (Ken Cox) [2104472] - intel: remove unused macros (Ken Cox) [2104472] - drivers/net/ethernet/intel: fix typos in comments (Ken Cox) [2104472] - ixgbe: Fix typos in comments (Ken Cox) [2104472] - drivers, ixgbe: export vf statistics (Ken Cox) [2104472] - ixgbe: fix unexpected VLAN Rx in promisc mode on VF (Ken Cox) [2104472] - ixgbe: fix bcast packets Rx on VF after promisc removal (Ken Cox) [2104472] - ixgbe: add xdp frags support to ndo_xdp_xmit (Ken Cox) [2104472] - ixgbe: propagate XFRM offload state direction instead of flags (Ken Cox) [2104472] - ixgbe: Fix module_param allow_unsupported_sfp type (Ken Cox) [2104472] - ixgbe, xsk: Get rid of redundant 'fallthrough' (Ken Cox) [2104472] - ixgbe, xsk: Diversify return values from xsk_wakeup call paths (Ken Cox) [2104472] - ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full (Ken Cox) [2104472] - ixgbe, xsk: Decorate IXGBE_XDP_REDIR with likely() (Ken Cox) [2104472] - perf test: Fix "all PMU test" to skip parametrized events (Michael Petlan) [2129405] - aquantia: Do not purge addresses when setting the number of rings (Izabela Bakollari) [2066382] - intel_idle: Add a new flag to initialize the AMX state (David Arcari) [2117766] - x86/fpu: Add a helper to prepare AMX state for low-power CPU idle (David Arcari) [2117766] Resolves: rhbz#2125474 Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
70 lines
2.3 KiB
Makefile
70 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 239
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|
|
|
|
RTBUILD:=.240
|