301a1123d9
* Thu Dec 15 2022 Luis Claudio R. Goncalves <lgoncalv@redhat.com> [5.14.0-215.rt14.216.el9] - [rt] build kernel-rt-5.14.0-215.rt14.216.el9 [2125474] - scsi: storvsc: Fix handling of srb_status and capacity change events (Mohammed Gamal) [2149711] - redhat/Makefile: Drop message about BUILDID deprecation (Veronika Kabatova) - pinctrl: amd: Don't save/restore interrupt status and wake status bits (David Arcari) [2130060] - clocksource/drivers/hyperv: add data structure for reference TSC MSR (Mohammed Gamal) [2139455] - x86/hyperv: Restore VP assist page after cpu offlining/onlining (Mohammed Gamal) [2139455] - x86/hyperv: fix invalid writes to MSRs during root partition kexec (Mohammed Gamal) [2139455] - x86/hyperv: Remove BUG_ON() for kmap_local_page() (Mohammed Gamal) [2139455] - x86/hyperv: Disable hardlockup detector by default in Hyper-V guests (Mohammed Gamal) [2139455] - x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable (Mohammed Gamal) [2139455] - x86/hyperv: Update 'struct hv_enlightened_vmcs' definition (Mohammed Gamal) [2139455] - x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition (Mohammed Gamal) [2139455] - x86/hyperv: Replace kmap() with kmap_local_page() (Mohammed Gamal) [2139455] - hyperv: simplify and rename generate_guest_id (Mohammed Gamal) [2139455] - PCI: hv: Only reuse existing IRTE allocation for Multi-MSI (Mohammed Gamal) [2139460] - PCI: hv: Fix the definition of vector in hv_compose_msi_msg() (Mohammed Gamal) [2139460] - PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu() (Mohammed Gamal) [2139460] - PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit() (Mohammed Gamal) [2139460] - PCI: hv: Add validation for untrusted Hyper-V values (Mohammed Gamal) [2139460] - PCI: hv: Fix interrupt mapping for multi-MSI (Mohammed Gamal) [2139460] - PCI: hv: Reuse existing IRTE allocation in compose_msi_msg() (Mohammed Gamal) [2139460] - PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI (Mohammed Gamal) [2139460] - PCI: hv: Fix synchronization between channel callback and hv_compose_msi_msg() (Mohammed Gamal) [2139460] - PCI: hv: Use vmbus_requestor to generate transaction IDs for VMbus hardening (Mohammed Gamal) [2139460] - PCI: hv: Fix multi-MSI to allow more than one MSI vector (Mohammed Gamal) [2139460] - Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register() (Mohammed Gamal) [2139472] - Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work() (Mohammed Gamal) [2139472] - Drivers: hv: fix repeated words in comments (Mohammed Gamal) [2139472] - Drivers: hv: vmbus: Split memcpy of flex-array (Mohammed Gamal) [2139472] - Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization (Mohammed Gamal) [2139472] - Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability (Mohammed Gamal) [2139472] - Drivers: hv: vmbus: Fix kernel-doc (Mohammed Gamal) [2139472] - Drivers: hv: vmbus: Optimize vmbus_on_event (Mohammed Gamal) [2139472] - Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region (Mohammed Gamal) [2139472] - Drivers: hv: Always reserve framebuffer region for Gen1 VMs (Mohammed Gamal) [2139472] - Drivers: hv: remove duplicate word in a comment (Mohammed Gamal) [2139472] - Drivers: hv: Create debugfs file with hyper-v balloon usage information (Mohammed Gamal) [2139472] - Drivers: hv: vm_bus: Handle vmbus rescind calls after vmbus is suspended (Mohammed Gamal) [2139472] - Drivers: hv: vmbus: Release cpu lock in error case (Mohammed Gamal) [2139472] - Drivers: hv: Fix syntax errors in comments (Mohammed Gamal) [2139472] - Drivers: hv: vmbus: Don't assign VMbus channel interrupts to isolated CPUs (Mohammed Gamal) [2139472] - tcp: Fix build break when CONFIG_IPV6=n (Jamie Bainbridge) [2143850] - tcp: annotate data-race around queue->synflood_warned (Jamie Bainbridge) [2143850] - tcp: Add listening address to SYN flood message (Jamie Bainbridge) [2143850] - tcp: Fix data-races around sysctl_tcp_syncookies. (Jamie Bainbridge) [2143850] - redhat/configs: enable CONFIG_GNSS for RHEL (Michal Schmidt) [2136119] - gnss: replace ida_simple API (Michal Schmidt) [2136119] Resolves: rhbz#2125474 Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
70 lines
2.3 KiB
Makefile
70 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 215
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|
|
|
|
RTBUILD:=.216
|