kernel-rt/Makefile.rhelver
Luis Claudio R. Goncalves 0a716b02b0 kernel-rt-5.14.0-159.rt21.159.el9
* Thu Aug 25 2022 Luis Claudio R. Goncalves <lgoncalv@redhat.com> [5.14.0-159.rt21.159.el9]
- [rt] build kernel-rt-5.14.0-159.rt21.159.el9 [2061574]
- mediatek: mt76: eeprom: fix missing of_node_put() in mt76_find_power_limits_node() (Jose Ignacio Tornos Martinez) [2103595]
- wifi: mac80211: consider EHT element size in assoc request (Jose Ignacio Tornos Martinez) [2103595]
- wifi: mac80211: switch airtime fairness back to deficit round-robin scheduling (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7615: fix throughput regression on DFS channels (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7915: fix incorrect testmode ipg on band 1 caused by wmm_idx (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7921: enlarge maximum VHT MPDU length to 11454 (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7921: fix aggregation subframes setting to HE max (Jose Ignacio Tornos Martinez) [2103595]
- wifi: mac80211_hwsim: set virtio device ready in probe() (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7921s: fix possible sdio deadlock in command fail (Jose Ignacio Tornos Martinez) [2103595]
- wifi: rtw89: 8852a: rfk: fix div 0 exception (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7921: do not update pm states in case of error (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7615: do not update pm stats in case of error (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: Avoid REO CMD failed prints during firmware recovery (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: Fix incorrect debug_mask mappings (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: fix missing skb drop on htc_tx_completion error (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7921s: fix firmware download random fail (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: fix IRQ affinity warning on shutdown (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: fix netdev open race (Jose Ignacio Tornos Martinez) [2103595]
- iwlwifi: fw: init SAR GEO table only if data is present (Jose Ignacio Tornos Martinez) [2103595]
- ath10k: htt_tx: do not interpret Eth frames as WiFi (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: Don't check arvif->is_started before sending management frames (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7915: fix twt table_mask to u16 in mt7915_dev (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: reset 11d state in process of recovery (Jose Ignacio Tornos Martinez) [2103595]
- brcmfmac: use ISO3166 country code and 0 rev as fallback on brcmfmac43602 chips (Jose Ignacio Tornos Martinez) [2103595]
- mt76: fix tx status related use-after-free race on station removal (Jose Ignacio Tornos Martinez) [2103595]
- mt76: do not attempt to reorder received 802.3 packets without agg session (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7921: fix kernel crash at mt7921_pci_remove (Jose Ignacio Tornos Martinez) [2103595]
- mt76: fix antenna config missing in 6G cap (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7915: report rx mode value in mt7915_mac_fill_rx_rate (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7915: do not pass data pointer to mt7915_mcu_muru_debug_set (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7915: fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7915: fix possible uninitialized pointer dereference in mt7986_wmac_gpio_setup (Jose Ignacio Tornos Martinez) [2103595]
- ath10k: enable napi on RX path for usb (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: fix the warning of dev_wake in mhi_pm_disable_transition() (Jose Ignacio Tornos Martinez) [2103595]
- ath11k: acquire ab->base_lock in unassign when finding the peer by addr (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7915: fix unbounded shift in mt7915_mcu_beacon_mbss (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7915: fix DBDC default band selection on MT7915D (Jose Ignacio Tornos Martinez) [2103595]
- mt76: mt7921: honor pm user configuration in mt7921_sniffer_interface_iter (Jose Ignacio Tornos Martinez) [2103595]
- crypto: testmgr - disallow plain cbcmac(aes) and ghash in FIPS mode (Vladis Dronov) [2107596]
- crypto: seqiv - flag instantiations as FIPS compliant (Vladis Dronov) [2107596]
- crypto: api - allow algs only in specific constructions in FIPS mode (Vladis Dronov) [2107596]
- i2c: qcom-geni: Fix GPI DMA buffer sync-back (Andrew Halaney) [2105390]
- i2c: qcom-geni: Use the correct return value (Andrew Halaney) [2105390]
- i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer() (Andrew Halaney) [2105390]
- i2c: qcom-geni: remove unnecessary conditions (Andrew Halaney) [2105390]
- i2c: qcom-geni: Use dev_err_probe() for GPI DMA error (Andrew Halaney) [2105390]
- i2c: qcom-geni: Add support for GPI DMA (Andrew Halaney) [2105390]
- soc: qcom: geni: Make use of the helper function devm_platform_ioremap_resource() (Andrew Halaney) [2105390]
- soc: qcom: geni: move GENI_IF_DISABLE_RO to common header (Andrew Halaney) [2105390]
- soc: qcom: geni: Add support for gpi dma (Andrew Halaney) [2105390]
Resolves: rhbz#2061574

Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
2022-08-25 17:46:37 -03:00

70 lines
2.3 KiB
Makefile

RHEL_MAJOR = 9
RHEL_MINOR = 1
#
# RHEL_RELEASE
# -------------
#
# Represents build number in 'release' part of RPM's name-version-release.
# name is <package_name>, e.g. kernel
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 159
#
# ZSTREAM
# -------
#
# This variable controls whether we use zstream numbering or not for the
# package release. The zstream release keeps the build number of the last
# build done for ystream for the Beta milestone, and increments a second
# number for each build. The third number is used for branched builds
# (eg.: for builds with security fixes or hot fixes done outside of the
# batch release process).
#
# For example, with ZSTREAM unset or set to "no", all builds will contain
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
# where X is the build number. With ZSTREAM set to "yes", we will have
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
# build number and Z will always be 1 except if you're doing a branched build
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
# number will be incremented instead of the Y).
#
ZSTREAM ?= no
#
# Early y+1 numbering
# --------------------
#
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
# First is RHEL_RELEASE inherited/merged from y as-is, second number
# is incremented with each build starting from 1. After merge from y,
# it resets back to 1. This way y+1 nvr reflects status of last merge.
#
# Example:
#
# rhel8.0 rhel-8.1
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
# kernel-4.18.0-58.2.el8
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
# kernel-4.18.0-60.el8
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
#
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
EARLY_YSTREAM ?= no
EARLY_YBUILD:=
EARLY_YRELEASE:=
ifneq ("$(ZSTREAM)", "yes")
ifeq ("$(EARLY_YSTREAM)","yes")
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
endif
endif
RTBUILD:=.159