rpms
/
kernel-rt
7
0
Fork 0
Code Issues Pull Requests Releases Activity

kernel-rt-5.12.0-0.rc5.180.rt3.8 

* Fri Apr 09 2021 Juri Lelli <juri.lelli@redhat.com> [5.12.0-0.rc5.180.rt3.8]
- Add localversion for -RT release (Thomas Gleixner)
- sysfs: Add /sys/kernel/realtime entry (Clark Williams)
- genirq: Disable irqpoll on -rt (Ingo Molnar)
- signals: Allow RT tasks to cache one sigqueue struct (Thomas Gleixner)
- tpm_tis: fix stall after iowrite*()s (Haris Okanovic)
- drivers/block/zram: Replace bit spinlocks with rtmutex for -rt (Mike Galbraith)
- POWERPC: Allow to enable RT (Sebastian Andrzej Siewior)
- powerpc: Avoid recursive header includes (Sebastian Andrzej Siewior)
- powerpc/stackprotector: work around stack-guard init from atomic (Sebastian Andrzej Siewior)
- powerpc/kvm: Disable in-kernel MPIC emulation for PREEMPT_RT (Bogdan Purcareata)
- powerpc/pseries/iommu: Use a locallock instead local_irq_save() (Sebastian Andrzej Siewior)
- powerpc: traps: Use PREEMPT_RT (Sebastian Andrzej Siewior)
- ARM64: Allow to enable RT (Sebastian Andrzej Siewior)
- ARM: Allow to enable RT (Sebastian Andrzej Siewior)
- x86: Enable RT also on 32bit (Sebastian Andrzej Siewior)
- arm64: fpsimd: Delay freeing memory in fpsimd_flush_thread() (Sebastian Andrzej Siewior)
- KVM: arm/arm64: downgrade preempt_disable()d region to migrate_disable() (Josh Cartwright)
- genirq: update irq_set_irqchip_state documentation (Josh Cartwright)
- ARM: enable irq in translation/section permission fault handlers (Yadi.hu)
- tty/serial/pl011: Make the locking work on RT (Thomas Gleixner)
- tty/serial/omap: Make the locking RT aware (Thomas Gleixner)
- leds: trigger: disable CPU trigger on -RT (Sebastian Andrzej Siewior)
- jump-label: disable if stop_machine() is used (Thomas Gleixner)
- arch/arm64: Add lazy preempt support (Anders Roxell)
- powerpc: Add support for lazy preemption (Thomas Gleixner)
- arm: Add support for lazy preemption (Thomas Gleixner)
- x86: Support for lazy preemption (Thomas Gleixner)
- x86/entry: Use should_resched() in idtentry_exit_cond_resched() (Sebastian Andrzej Siewior)
- sched: Add support for lazy preemption (Thomas Gleixner)
- mm/scatterlist: Do not disable irqs on RT (Thomas Gleixner)
- x86: Allow to enable RT (Sebastian Andrzej Siewior)
- cpuset: Convert callback_lock to raw_spinlock_t (Mike Galbraith)
- drm/i915/gt: Only disable interrupts for the timeline lock on !force-threaded (Sebastian Andrzej Siewior)
- drm/i915: skip DRM_I915_LOW_LEVEL_TRACEPOINTS with NOTRACE (Sebastian Andrzej Siewior)
- drm/i915: disable tracing on -RT (Sebastian Andrzej Siewior)
- drm/i915: Don't disable interrupts on PREEMPT_RT during atomic updates (Mike Galbraith)
- drm,radeon,i915: Use preempt_disable/enable_rt() where recommended (Mike Galbraith)
- lockdep: disable self-test (Sebastian Andrzej Siewior)
- lockdep: selftest: fix warnings due to missing PREEMPT_RT conditionals (Josh Cartwright)
- lockdep: selftest: Only do hardirq context test for raw spinlock (Yong Zhang)
- lockdep: Make it RT aware (Thomas Gleixner)
- net: Remove preemption disabling in netif_rx() (Priyanka Jain)
- random: Make it work on rt (Thomas Gleixner)
- x86: stackprotector: Avoid random pool on rt (Thomas Gleixner)
- panic: skip get_random_bytes for RT_FULL in init_oops_id (Thomas Gleixner)
- crypto: cryptd - add a lock instead preempt_disable/local_bh_disable (Sebastian Andrzej Siewior)
- crypto: limit more FPU-enabled sections (Sebastian Andrzej Siewior)
- irqwork: push most work into softirq context (Sebastian Andrzej Siewior)
- net: dev: always take qdisc's busylock in __dev_xmit_skb() (Sebastian Andrzej Siewior)
- net: Dequeue in dev_cpu_dead() without the lock (Sebastian Andrzej Siewior)
- net: Use skbufhead with raw lock (Thomas Gleixner)
- debugobjects: Make RT aware (Thomas Gleixner)
- fs: namespace: Use cpu_chill() in trylock loops (Thomas Gleixner)
- rt: Introduce cpu_chill() (Thomas Gleixner)
- sunrpc: Make svc_xprt_do_enqueue() use get_cpu_light() (Mike Galbraith)
- scsi/fcoe: Make RT aware. (Thomas Gleixner)
- md: raid5: Make raid5_percpu handling RT aware (Thomas Gleixner)
- block/mq: do not invoke preempt_disable() (Sebastian Andrzej Siewior)
- mm/vmalloc: Another preempt disable region which sucks (Thomas Gleixner)
- rcutorture: Avoid problematic critical section nesting on RT (Scott Wood)
- locking: Make spinlock_t and rwlock_t a RCU section on RT (Sebastian Andrzej Siewior)
- rcu: Delay RCU-selftests (Sebastian Andrzej Siewior)
- ptrace: fix ptrace_unfreeze_traced() race with rt-lock (Oleg Nesterov)
- ptrace: fix ptrace vs tasklist_lock race (Sebastian Andrzej Siewior)
- pid.h: include atomic.h (Grygorii Strashko)
- net/core: use local_bh_disable() in netif_rx_ni() (Sebastian Andrzej Siewior)
- softirq: Disable softirq stacks for RT (Thomas Gleixner)
- softirq: Check preemption after reenabling interrupts (Thomas Gleixner)
- sched: Disable TTWU_QUEUE on RT (Thomas Gleixner)
- sched: Do not account rcu_preempt_depth on RT in might_sleep() (Thomas Gleixner)
- kernel/sched: move stack + kprobe clean up to __put_task_struct() (Sebastian Andrzej Siewior)
- sched: Move mmdrop to RCU on RT (Thomas Gleixner)
- sched: Limit the number of task migrations per batch (Thomas Gleixner)
- wait.h: include atomic.h (Sebastian Andrzej Siewior)
- x86: kvm Require const tsc for RT (Thomas Gleixner)
- mm/zsmalloc: copy with get_cpu_var() and locking (Mike Galbraith)
- mm/memcontrol: Replace local_irq_disable with local locks (Sebastian Andrzej Siewior)
- mm/memcontrol: Don't call schedule_work_on in preemption disabled context (Yang Shi)
- mm: memcontrol: Provide a local_lock for per-CPU memcg_stock (Sebastian Andrzej Siewior)
- mm: slub: Don't enable partial CPU caches on PREEMPT_RT by default (Sebastian Andrzej Siewior)
- mm: page_alloc: Use a local_lock instead of explicit local_irq_save(). (Ingo Molnar)
- mm: page_alloc: Use migrate_disable() in drain_local_pages_wq() (Sebastian Andrzej Siewior)
- mm: slub: Don't resize the location tracking cache on PREEMPT_RT (Sebastian Andrzej Siewior)
- mm: slub: Move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context (Sebastian Andrzej Siewior)
- mm: slub: Move discard_slab() invocations out of IRQ-off sections (Sebastian Andrzej Siewior)
- mm: slub: Enable irqs for __GFP_WAIT (Thomas Gleixner)
- mm: slub: Make object_map_lock a raw_spinlock_t (Sebastian Andrzej Siewior)
- mm: sl[au]b: Change list_lock to raw_spinlock_t (Thomas Gleixner)
- locking: don't check for __LINUX_SPINLOCK_TYPES_H on -RT archs (Sebastian Andrzej Siewior)
- trace: Add migrate-disabled counter to tracing output (Thomas Gleixner)
- kernel/sched: add {put|get}_cpu_light() (Sebastian Andrzej Siewior)
- signal/x86: Delay calling signals in atomic (Oleg Nesterov)
- rt: Add local irq locks (Thomas Gleixner)
- efi: Allow efi=runtime (Sebastian Andrzej Siewior)
- efi: Disable runtime services on RT (Sebastian Andrzej Siewior)
- net/core: disable NET_RX_BUSY_POLL on RT (Sebastian Andrzej Siewior)
- sched: Disable CONFIG_RT_GROUP_SCHED on RT (Thomas Gleixner)
- mm: Allow only SLUB on RT (Ingo Molnar)
- kconfig: Disable config options which are not RT compatible (Thomas Gleixner)
- net: Properly annotate the try-lock for the seqlock (Sebastian Andrzej Siewior)
- net/Qdisc: use a seqlock instead seqcount (Sebastian Andrzej Siewior)
- fs/dcache: disable preemption on i_dir_seq's write side (Sebastian Andrzej Siewior)
- fs/dcache: use swait_queue instead of waitqueue (Sebastian Andrzej Siewior)
- u64_stats: Disable preemption on 32bit-UP/SMP with RT during updates (Sebastian Andrzej Siewior)
- xfrm: Use sequence counter with associated spinlock (Ahmed S. Darwish)
- mm/memcontrol: Disable preemption in __mod_memcg_lruvec_state() (Sebastian Andrzej Siewior)
- mm/vmstat: Protect per cpu variables with preempt disable on RT (Ingo Molnar)
- preempt: Provide preempt_*_(no)rt variants (Thomas Gleixner)
- signal: Revert ptrace preempt magic (Thomas Gleixner)
- locking/rtmutex: Use custom scheduling function for spin-schedule() (Sebastian Andrzej Siewior)
- locking/rtmutex: add ww_mutex addon for mutex-rt (Sebastian Andrzej Siewior)
- locking/rtmutex: wire up RT's locking (Thomas Gleixner)
- locking/rtmutex: add rwlock implementation based on rtmutex (Thomas Gleixner)
- locking/rtmutex: add rwsem implementation based on rtmutex (Thomas Gleixner)
- locking/rtmutex: add mutex implementation based on rtmutex (Thomas Gleixner)
- locking/rtmutex: Allow rt_mutex_trylock() on PREEMPT_RT (Sebastian Andrzej Siewior)
- locking/rtmutex: add sleeping lock implementation (Thomas Gleixner)
- sched: Add saved_state for tasks blocked on sleeping locks (Thomas Gleixner)
- locking/rtmutex: export lockdep-less version of rt_mutex's lock, trylock and unlock (Thomas Gleixner)
- locking/rtmutex: Provide rt_mutex_slowlock_locked() (Thomas Gleixner)
- locking: split out the rbtree definition (Sebastian Andrzej Siewior)
- lockdep: Reduce header files in debug_locks.h (Sebastian Andrzej Siewior)
- locking/rtmutex: Avoid include hell (Thomas Gleixner)
- locking/spinlock: Split the lock types header (Thomas Gleixner)
- locking/rtmutex: Make lock_killable work (Thomas Gleixner)
- futex: Fix bug on when a requeued RT task times out (Steven Rostedt)
- locking/rtmutex: Handle the various new futex race conditions (Thomas Gleixner)
- locking/rtmutex: Remove rt_mutex_timed_lock() (Sebastian Andrzej Siewior)
- locking/rtmutex: Move rt_mutex_init() outside of CONFIG_DEBUG_RT_MUTEXES (Sebastian Andrzej Siewior)
- locking/rtmutex: Remove output from deadlock detector. (Sebastian Andrzej Siewior)
- locking/rtmutex: Remove cruft (Sebastian Andrzej Siewior)
- rcu: Prevent false positive softirq warning on RT (Thomas Gleixner)
- tick/sched: Prevent false positive softirq pending warnings on RT (Thomas Gleixner)
- softirq: Make softirq control and processing RT aware (Thomas Gleixner)
- softirq: Move various protections into inline helpers (Thomas Gleixner)
- irqtime: Make accounting correct on RT (Thomas Gleixner)
- softirq: Add RT specific softirq accounting (Thomas Gleixner)
- tasklets: Switch tasklet_disable() to the sleep wait variant (Thomas Gleixner)
- firewire: ohci: Use tasklet_disable_in_atomic() where required (Sebastian Andrzej Siewior)
- PCI: hv: Use tasklet_disable_in_atomic() (Sebastian Andrzej Siewior)
- atm: eni: Use tasklet_disable_in_atomic() in the send() callback (Sebastian Andrzej Siewior)
- ath9k: Use tasklet_disable_in_atomic() (Sebastian Andrzej Siewior)
- net: sundance: Use tasklet_disable_in_atomic(). (Sebastian Andrzej Siewior)
- net: jme: Replace link-change tasklet with work (Sebastian Andrzej Siewior)
- tasklets: Prevent tasklet_unlock_spin_wait() deadlock on RT (Thomas Gleixner)
- tasklets: Replace spin wait in tasklet_kill() (Peter Zijlstra)
- tasklets: Replace spin wait in tasklet_unlock_wait() (Peter Zijlstra)
- tasklets: Use spin wait in tasklet_disable() temporarily (Thomas Gleixner)
- tasklets: Provide tasklet_disable_in_atomic() (Thomas Gleixner)
- tasklets: Use static inlines for stub implementations (Thomas Gleixner)
- tasklets: Replace barrier() with cpu_relax() in tasklet_unlock_wait() (Thomas Gleixner)
- smp: Wake ksoftirqd on PREEMPT_RT instead do_softirq(). (Sebastian Andrzej Siewior)
- tcp: Remove superfluous BH-disable around listening_hash (Sebastian Andrzej Siewior)
- net: Move lockdep where it belongs (Thomas Gleixner)
- shmem: Use raw_spinlock_t for ->stat_lock (Sebastian Andrzej Siewior)
- mm: workingset: replace IRQ-off check with a lockdep assert. (Sebastian Andrzej Siewior)
- cgroup: use irqsave in cgroup_rstat_flush_locked() (Sebastian Andrzej Siewior)
- kcov: Remove kcov include from sched.h and move it to its users. (Sebastian Andrzej Siewior)
- printk: add pr_flush() (John Ogness)
- printk: add console handover (John Ogness)
- printk: remove deferred printing (John Ogness)
- printk: move console printing to kthreads (John Ogness)
- printk: introduce kernel sync mode (John Ogness)
- printk: use seqcount_latch for console_seq (John Ogness)
- printk: combine boot_delay_msec() into printk_delay() (John Ogness)
- printk: relocate printk_delay() and vprintk_default() (John Ogness)
- serial: 8250: implement write_atomic (John Ogness)
- kdb: only use atomic consoles for output mirroring (John Ogness)
- console: add write_atomic interface (John Ogness)
- printk: convert @syslog_lock to spin_lock (John Ogness)
- printk: remove safe buffers (John Ogness)
- printk: track/limit recursion (John Ogness)
- printk: console: remove unnecessary safe buffer usage (John Ogness)
- printk: kmsg_dump: remove _nolock() variants (John Ogness)
- printk: remove logbuf_lock (John Ogness)
- printk: introduce a kmsg_dump iterator (John Ogness)
- printk: kmsg_dumper: remove @active field (John Ogness)
- printk: add syslog_lock (John Ogness)
- printk: use atomic64_t for devkmsg_user.seq (John Ogness)
- printk: use seqcount_latch for clear_seq (John Ogness)
- printk: introduce CONSOLE_LOG_MAX (John Ogness)
- printk: consolidate kmsg_dump_get_buffer/syslog_print_all code (John Ogness)
- printk: refactor kmsg_dump_get_buffer() (John Ogness)
- printk: kmsg_dump: remove unused fields (John Ogness)
- printk: limit second loop of syslog_print_all (John Ogness)
- mtd: mtdoops: synchronize kmsg_dumper (John Ogness)
- um: synchronize kmsg_dumper (John Ogness)
- powerpc/mm: Move the linear_mapping_mutex to the ifdef where it is used (Sebastian Andrzej Siewior)
- notifier: Make atomic_notifiers use raw_spinlock (Valentin Schneider)
- genirq: Move prio assignment into the newly created thread (Thomas Gleixner)
- kthread: Move prio/affinite change into the newly created thread (Sebastian Andrzej Siewior)
- timers: Move clearing of base::timer_running under base::lock (Thomas Gleixner)
- highmem: Don't disable preemption on RT in kmap_atomic() (Sebastian Andrzej Siewior)
Resolves: rhbz#1891873
This commit is contained in:
Juri Lelli 2021-04-09 16:29:32 +02:00
parent 3a17aef347
commit 82874cf24c
5 changed files with 111 additions and 64 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Makefile.rhelver
View File

@ -12,7 +12,7 @@ RHEL_MINOR = 99
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 175
RHEL_RELEASE = 180
#
# Early y+1 numbering
@ -44,4 +44,4 @@ ifneq ("$(ZSTREAM)", "yes")
endif
endif
RTBUILD:=.7
RTBUILD:=.8

46
kernel-rt-x86_64-debug-rhel.config
View File

@ -227,7 +227,6 @@ CONFIG_ARCH_RANDOM=y
# CONFIG_ARCH_SPARX5 is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SYNQUACER is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCNET is not set
CONFIG_ARM64_AMU_EXTN=y
CONFIG_ARM64_BTI=y
@ -237,7 +236,6 @@ CONFIG_ARM64_ERRATUM_1530923=y
CONFIG_ARM64_ERRATUM_1542419=y
CONFIG_ARM64_USE_LSE_ATOMICS=y
CONFIG_ARM_CMN=m
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_ARM_MHU_V2 is not set
CONFIG_ARM_SMCCC_SOC_ID=y
# CONFIG_ARM_SMC_WATCHDOG is not set
@ -415,7 +413,6 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_BLK_DEV_SD=m
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_BLK_DEV_SX8 is not set
@ -464,7 +461,7 @@ CONFIG_BPF_EVENTS=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
# CONFIG_BPF_LSM is not set
CONFIG_BPF_LSM=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_BPF_STREAM_PARSER=y
CONFIG_BPF_SYSCALL=y
@ -551,7 +548,7 @@ CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_RTL=m
# CONFIG_BT_SELFTEST is not set
CONFIG_BTT=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_BUG=y
CONFIG_BUILD_SALT=""
# CONFIG_C2PORT is not set
@ -848,7 +845,6 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_CMAC=m
@ -873,7 +869,7 @@ CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_CCP_DD=m
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_CCP_DEBUGFS=y
CONFIG_CRYPTO_DEV_CCP=y
# CONFIG_CRYPTO_DEV_CCREE is not set
CONFIG_CRYPTO_DEV_CHELSIO=m
@ -936,13 +932,11 @@ CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_NHPOLY1305_AVX2=m
CONFIG_CRYPTO_NHPOLY1305_NEON=m
CONFIG_CRYPTO_NHPOLY1305_SSE2=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_POLY1305_NEON is not set
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
@ -1040,7 +1034,7 @@ CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_DEBUG_IRQFLAGS=y
# CONFIG_DEBUG_KERNEL_DC is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
@ -1150,7 +1144,7 @@ CONFIG_DLM_DEBUG=y
CONFIG_DLM=m
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_MOVE_NOTIFY=y
@ -1184,7 +1178,7 @@ CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_MULTIPATH_IOA=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
@ -1794,8 +1788,6 @@ CONFIG_GACT_PROB=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set
CONFIG_GCC_PLUGIN_STRUCTLEAK=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCOV_KERNEL is not set
# CONFIG_GDB_SCRIPTS is not set
@ -1899,7 +1891,7 @@ CONFIG_HANGCHECK_TIMER=m
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HD44780 is not set
# CONFIG_HDC100X is not set
# CONFIG_HDC2010 is not set
@ -2942,6 +2934,9 @@ CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_LOCKD=m
CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
CONFIG_LOCKD_V4=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_LOCK_STAT=y
@ -2962,8 +2957,8 @@ CONFIG_LPC_ICH=m
# CONFIG_LP_CONSOLE is not set
CONFIG_LPC_SCH=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LSM="lockdown,yama,integrity,selinux,bpf"
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_LSM="yama,integrity,selinux"
# CONFIG_LTC1660 is not set
# CONFIG_LTC2471 is not set
# CONFIG_LTC2485 is not set
@ -3978,6 +3973,7 @@ CONFIG_NUMA_EMU=y
CONFIG_NUMA=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_PFN=y
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
CONFIG_NVME_FC=m
# CONFIG_NVME_HWMON is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
@ -4029,7 +4025,7 @@ CONFIG_PACKET=y
# CONFIG_PACKING is not set
CONFIG_PAGE_EXTENSION=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_PAGE_POISONING=y
CONFIG_PAGE_REPORTING=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_PANASONIC_LAPTOP=m
@ -4156,7 +4152,7 @@ CONFIG_PCSPKR_PLATFORM=y
# CONFIG_PDA_POWER is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_PEAQ_WMI is not set
# CONFIG_PERCPU_STATS is not set
CONFIG_PERCPU_STATS=y
# CONFIG_PERCPU_TEST is not set
CONFIG_PERF_EVENTS_AMD_POWER=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
@ -4762,7 +4758,7 @@ CONFIG_SCHED_MC_PRIO=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_THERMAL_PRESSURE is not set
CONFIG_SCHED_TRACER=y
@ -4797,7 +4793,6 @@ CONFIG_SCSI_ENCLOSURE=m
# CONFIG_SCSI_ESAS2R is not set
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_HPTIOP is not set
@ -4863,13 +4858,13 @@ CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_INFINIBAND=y
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_DEVELOP=y
@ -5122,7 +5117,6 @@ CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_KGDB_NMI is not set
@ -5174,7 +5168,7 @@ CONFIG_SIGNALFD=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
@ -5410,7 +5404,7 @@ CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
# CONFIG_SND_SOC_INTEL_CATPT is not set
CONFIG_SND_SOC_INTEL_CATPT=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
@ -6680,7 +6674,7 @@ CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m
CONFIG_WDTPCI=m

44
kernel-rt-x86_64-rhel.config
View File

@ -227,7 +227,6 @@ CONFIG_ARCH_RANDOM=y
# CONFIG_ARCH_SPARX5 is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SYNQUACER is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCNET is not set
CONFIG_ARM64_AMU_EXTN=y
CONFIG_ARM64_BTI=y
@ -237,7 +236,6 @@ CONFIG_ARM64_ERRATUM_1530923=y
CONFIG_ARM64_ERRATUM_1542419=y
CONFIG_ARM64_USE_LSE_ATOMICS=y
CONFIG_ARM_CMN=m
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_ARM_MHU_V2 is not set
CONFIG_ARM_SMCCC_SOC_ID=y
# CONFIG_ARM_SMC_WATCHDOG is not set
@ -415,7 +413,6 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_BLK_DEV_SD=m
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_BLK_DEV_SX8 is not set
@ -464,7 +461,7 @@ CONFIG_BPF_EVENTS=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
# CONFIG_BPF_LSM is not set
CONFIG_BPF_LSM=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_BPF_STREAM_PARSER=y
CONFIG_BPF_SYSCALL=y
@ -551,7 +548,7 @@ CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_RTL=m
# CONFIG_BT_SELFTEST is not set
CONFIG_BTT=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_BUG=y
CONFIG_BUILD_SALT=""
# CONFIG_C2PORT is not set
@ -848,7 +845,6 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_CMAC=m
@ -936,13 +932,11 @@ CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_NHPOLY1305_AVX2=m
CONFIG_CRYPTO_NHPOLY1305_NEON=m
CONFIG_CRYPTO_NHPOLY1305_SSE2=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_POLY1305_NEON is not set
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
@ -1141,7 +1135,7 @@ CONFIG_DLCI_MAX=8
CONFIG_DLM_DEBUG=y
CONFIG_DLM=m
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DMA_API_DEBUG_SG=y
# CONFIG_DMA_API_DEBUG_SG is not set
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS=y
@ -1176,7 +1170,7 @@ CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_MULTIPATH_IOA=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
@ -1775,11 +1769,9 @@ CONFIG_GACT_PROB=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set
CONFIG_GCC_PLUGIN_STRUCTLEAK=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCOV_KERNEL is not set
# CONFIG_GDB_SCRIPTS is not set
@ -1883,7 +1875,7 @@ CONFIG_HANGCHECK_TIMER=m
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HD44780 is not set
# CONFIG_HDC100X is not set
# CONFIG_HDC2010 is not set
@ -2333,7 +2325,7 @@ CONFIG_INFINIBAND_VMWARE_PVRDMA=m
# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
# CONFIG_INITRAMFS_COMPRESSION_XZ is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_NONE=y
CONFIG_INOTIFY_USER=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ADXL34X is not set
@ -2923,6 +2915,9 @@ CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_LOCKD=m
CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
CONFIG_LOCKD_V4=y
# CONFIG_LOCK_EVENT_COUNTS is not set
# CONFIG_LOCK_STAT is not set
@ -2943,8 +2938,8 @@ CONFIG_LPC_ICH=m
# CONFIG_LP_CONSOLE is not set
CONFIG_LPC_SCH=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LSM="lockdown,yama,integrity,selinux,bpf"
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_LSM="yama,integrity,selinux"
# CONFIG_LTC1660 is not set
# CONFIG_LTC2471 is not set
# CONFIG_LTC2485 is not set
@ -3959,6 +3954,7 @@ CONFIG_NUMA_EMU=y
CONFIG_NUMA=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_PFN=y
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
CONFIG_NVME_FC=m
# CONFIG_NVME_HWMON is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
@ -4010,7 +4006,7 @@ CONFIG_PACKET=y
# CONFIG_PACKING is not set
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_PAGE_POISONING=y
CONFIG_PAGE_REPORTING=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_PANASONIC_LAPTOP=m
@ -4742,7 +4738,7 @@ CONFIG_SCHED_MC_PRIO=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_THERMAL_PRESSURE is not set
CONFIG_SCHED_TRACER=y
@ -4777,7 +4773,6 @@ CONFIG_SCSI_ENCLOSURE=m
# CONFIG_SCSI_ESAS2R is not set
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE is not set
CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_HPTIOP is not set
@ -4843,13 +4838,13 @@ CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_INFINIBAND=y
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_DEVELOP=y
@ -5102,7 +5097,6 @@ CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_KGDB_NMI is not set
@ -5154,7 +5148,7 @@ CONFIG_SIGNALFD=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
@ -5389,7 +5383,7 @@ CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
# CONFIG_SND_SOC_INTEL_CATPT is not set
CONFIG_SND_SOC_INTEL_CATPT=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
@ -6658,7 +6652,7 @@ CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m
CONFIG_WDTPCI=m

75
kernel.spec
View File

@ -6,6 +6,12 @@
# Disable LTO in userspace packages.
%global _lto_cflags %{nil}
# Option to enable compiling with clang instead of gcc.
%bcond_with toolchain_clang
%if %{with toolchain_clang}
%global toolchain clang
%endif
# Cross compile on copr for arm
# See https://bugzilla.redhat.com/1879599
@ -64,7 +70,7 @@ Summary: The Linux kernel
# For a stable, released kernel, released_kernel should be 1.
%global released_kernel 0
%global distro_build 0.rc4.175
%global distro_build 0.rc5.180
%if 0%{?fedora}
%define secure_boot_arch x86_64
@ -105,13 +111,13 @@ Summary: The Linux kernel
%endif
%define rpmversion 5.12.0
%define pkgrelease 0.rc4.175.rt3.7
%define pkgrelease 0.rc5.180.rt3.8
# This is needed to do merge window version magic
%define patchlevel 12
# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc4.175.rt3.7%{?buildid}%{?dist}
%define specrelease 0.rc5.180.rt3.8%{?buildid}%{?dist}
%define pkg_release %{specrelease}
@ -230,6 +236,10 @@ Summary: The Linux kernel
%define make_opts -s
%endif
%if %{with toolchain_clang}
%global make_opts %{make_opts} HOSTCC=clang CC=clang
%endif
# turn off debug kernel and kabichk for gcov builds
%if %{with_gcov}
%define with_debug 0
@ -453,6 +463,14 @@ Summary: The Linux kernel
%define with_configchecks 0
%endif
# Setting the compiler to clang enables some different config options
# than what is expected, so disable this check for now.
# TODO: What's the best way to fix this? Do wee need a different set of
# configs for clang?
%if %{with toolchain_clang}
%define with_configchecks 0
%endif
# To temporarily exclude an architecture from being built, add it to
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
# don't build kernel-headers then the new build system will no longer let
@ -621,13 +639,17 @@ BuildRequires: xmlto
BuildRequires: asciidoc
%endif
%if %{with toolchain_clang}
BuildRequires: clang
%endif
# Because this is the kernel, it's hard to get a single upstream URL
# to represent the base without needing to do a bunch of patching. This
# tarball is generated from a src-git tree. If you want to see the
# exact git commit you can run
#
# xzcat -qq ${TARBALL} | git get-tar-commit-id
Source0: linux-5.12.0-0.rc4.175.rt3.7.tar.xz
Source0: linux-5.12.0-0.rc5.180.rt3.8.tar.xz
Source1: Makefile.rhelver
@ -1083,6 +1105,12 @@ AutoReqProv: no\
Requires(pre): findutils\
Requires: findutils\
Requires: perl-interpreter\
Requires: openssl-devel\
Requires: elfutils-libelf-devel\
Requires: bison\
Requires: flex\
Requires: make\
Requires: gcc\
%description %{?1:%{1}-}devel\
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
@ -1316,8 +1344,8 @@ ApplyOptionalPatch()
fi
}
%setup -q -n kernel-5.12.0-0.rc4.175.rt3.7 -c
mv linux-5.12.0-0.rc4.175.rt3.7 linux-%{KVERREL}
%setup -q -n kernel-5.12.0-0.rc5.180.rt3.8 -c
mv linux-5.12.0-0.rc5.180.rt3.8 linux-%{KVERREL}
cd linux-%{KVERREL}
cp -a %{SOURCE1} .
@ -1797,6 +1825,7 @@ BuildKernel() {
cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
@ -2888,8 +2917,8 @@ fi
#
#
%changelog
* Wed Mar 31 2021 Juri Lelli <juri.lelli@redhat.com> [5.12.0-0.rc4.175.rt3.7]
- kernel-5.12.0-0.rc4.175.el9 rebase
* Fri Apr 09 2021 Juri Lelli <juri.lelli@redhat.com> [5.12.0-0.rc5.180.rt3.8]
- kernel-5.12.0-0.rc5.180 rebase
- spec: Generate separate kernel-rt-kvm packages (Juri Lelli)
- Add RT config options (Juri Lelli)
- specfile: Add with_realtime (Juri Lelli)
@ -3088,6 +3117,36 @@ fi
- timers: Move clearing of base::timer_running under base::lock (Thomas Gleixner)
- highmem: Don't disable preemption on RT in kmap_atomic() (Sebastian Andrzej Siewior)
* Fri Mar 26 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.12.0-0.rc4.20210326gitdb24726bfefa.178]
- New configs in fs/pstore (CKI@GitLab)
* Thu Mar 25 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.12.0-0.rc4.20210325gite138138003eb.177]
- New configs in arch/powerpc (Fedora Kernel Team)
- configs: enable BPF LSM on Fedora and ARK (Ondrej Mosnacek)
- configs: clean up LSM configs (Ondrej Mosnacek)
* Wed Mar 24 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.12.0-0.rc4.20210324git7acac4b3196c.176]
- New configs in drivers/platform (CKI@GitLab)
- New configs in drivers/firmware (CKI@GitLab)
- New configs in drivers/mailbox (Fedora Kernel Team)
- New configs in drivers/net/phy (Justin M. Forbes)
- Update CONFIG_DM_MULTIPATH_IOA (Augusto Caringi)
- New configs in mm/Kconfig (CKI@GitLab)
- New configs in arch/powerpc (Jeremy Cline)
- New configs in arch/powerpc (Jeremy Cline)
- New configs in drivers/input (Fedora Kernel Team)
- New configs in net/bluetooth (Justin M. Forbes)
- New configs in drivers/clk (Fedora Kernel Team)
- New configs in init/Kconfig (Jeremy Cline)
- redhat: allow running fedora-configs and rh-configs targets outside of redhat/ (Herton R. Krzesinski)
- all: unify the disable of goldfish (android emulation platform) (Peter Robinson)
- common: minor cleanup/de-dupe of dma/dmabuf debug configs (Peter Robinson)
- common/ark: these drivers/arches were removed in 5.12 (Peter Robinson)
- common: unset serial mouse for general config (Peter Robinson)
- Correct kernel-devel make prepare build for 5.12. (Paulo E. Castro)
- redhat: add initial support for centos stream dist-git sync on Makefiles (Herton R. Krzesinski)
- redhat/configs: Enable CONFIG_SCHED_STACK_END_CHECK for Fedora and ARK (Josh Poimboeuf) [1856174]
* Sat Mar 20 2021 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.12.0-0.rc3.20210320git1c273e10bc0c.173]
- CONFIG_VFIO now selects IOMMU_API instead of depending on it, causing several config mismatches for the zfcpdump kernel (Justin M. Forbes)

6
sources
View File

@ -1,3 +1,3 @@
SHA512 (linux-5.12.0-0.rc4.175.rt3.7.tar.xz) = 00bb9b3aeb0cbda6946398d3d497e4d371ad6547861847dd6d1debf0805c057272621744e1079a9a840fa1c02364b3233374039f578b3d8c29193a6090ec5476
SHA512 (kernel-abi-whitelists-5.12.0-0.rc4.175.tar.bz2) = 00a109eccefab5836c1532851f1db839ef7de037d721c77d48e9f5f88f053217332283c7595850860da1cb2c552024dc54a57e45c34bb466897303fe8b6fcc8a
SHA512 (kernel-kabi-dw-5.12.0-0.rc4.175.tar.bz2) = 482a7da61d8f2f89614fafcc5ccd9752e222ce29b5c083fdede8263df96ae34eff92a6af26c94691de370e76ca342e71210505d8e6c91153856d004c94ac8d69
SHA512 (linux-5.12.0-0.rc5.180.rt3.8.tar.xz) = 5c63562cda415215c0f4b07ab9b961baed2d0f343017db0d67e2b54f3f251f1f29f0f9fe4690a1c1b2a9fd336c4c1ca1fe397869910444b03b067dfe81d77380
SHA512 (kernel-abi-whitelists-5.12.0-0.rc5.180.tar.bz2) = 4800abb8f60ddbcee977ec78106212cc5c596af7ec97f8cc52b350985d186cf8eb60cbbf3fd9a3a64d76257ae264cf0f37fa020f30cde1291947ad10dfa4a87f
SHA512 (kernel-kabi-dw-5.12.0-0.rc5.180.tar.bz2) = 15be151bf59d47793cd2872f479e6f41b5e3dbf654894c665139b9fd61eafdd94e26e9abb59c1c73ef83653370ce78ee7835a19700a7fa872d70e8da597bd742