From 5c573de50ffda441e47b1635d1232d01dcad25d9 Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Thu, 3 Jun 2021 17:30:53 +0200 Subject: [PATCH] kernel-rt-5.13.0-0.rc4.33.rt3.4 * Thu Jun 03 2021 Juri Lelli [5.13.0-0.rc4.33.rt3.4] - kernel-5.13.0-0.rc4.33.el9 rebase - Revert "eventfd: track eventfd_signal() recursion depth" (Juri Lelli) - Revert "aio: prevent potential eventfd recursion on poll" (Juri Lelli) - redhat: Add realtime-setup dependecy for kernel-rt metapackage (Juri Lelli) - spec: Generate separate kernel-rt-kvm packages (Juri Lelli) - Add RT config options (Juri Lelli) - specfile: Add with_realtime (Juri Lelli) - RTize build scripts (Juri Lelli) - Add localversion for -RT release (Thomas Gleixner) - sysfs: Add /sys/kernel/realtime entry (Clark Williams) - genirq: Disable irqpoll on -rt (Ingo Molnar) - tpm_tis: fix stall after iowrite*()s (Haris Okanovic) - drivers/block/zram: Replace bit spinlocks with rtmutex for -rt (Mike Galbraith) - powerpc: Avoid recursive header includes (Sebastian Andrzej Siewior) - powerpc/stackprotector: work around stack-guard init from atomic (Sebastian Andrzej Siewior) - powerpc/kvm: Disable in-kernel MPIC emulation for PREEMPT_RT (Bogdan Purcareata) - powerpc/pseries/iommu: Use a locallock instead local_irq_save() (Sebastian Andrzej Siewior) - powerpc: traps: Use PREEMPT_RT (Sebastian Andrzej Siewior) - ARM64: Allow to enable RT (Sebastian Andrzej Siewior) - ARM: Allow to enable RT (Sebastian Andrzej Siewior) - x86: Enable RT also on 32bit (Sebastian Andrzej Siewior) - arm64: fpsimd: Delay freeing memory in fpsimd_flush_thread() (Sebastian Andrzej Siewior) - KVM: arm/arm64: downgrade preempt_disable()d region to migrate_disable() (Josh Cartwright) - genirq: update irq_set_irqchip_state documentation (Josh Cartwright) - ARM: enable irq in translation/section permission fault handlers (Yadi.hu) - tty/serial/pl011: Make the locking work on RT (Thomas Gleixner) - tty/serial/omap: Make the locking RT aware (Thomas Gleixner) - leds: trigger: disable CPU trigger on -RT (Sebastian Andrzej Siewior) - jump-label: disable if stop_machine() is used (Thomas Gleixner) - arch/arm64: Add lazy preempt support (Anders Roxell) - arm: Add support for lazy preemption (Thomas Gleixner) - x86: Support for lazy preemption (Thomas Gleixner) - x86/entry: Use should_resched() in idtentry_exit_cond_resched() (Sebastian Andrzej Siewior) - sched: Add support for lazy preemption (Thomas Gleixner) - mm/scatterlist: Do not disable irqs on RT (Thomas Gleixner) - x86: Allow to enable RT (Sebastian Andrzej Siewior) - cpuset: Convert callback_lock to raw_spinlock_t (Mike Galbraith) - drm/i915/gt: Only disable interrupts for the timeline lock on !force-threaded (Sebastian Andrzej Siewior) - drm/i915: skip DRM_I915_LOW_LEVEL_TRACEPOINTS with NOTRACE (Sebastian Andrzej Siewior) - drm/i915: disable tracing on -RT (Sebastian Andrzej Siewior) - drm/i915: Don't disable interrupts on PREEMPT_RT during atomic updates (Mike Galbraith) - drm,radeon,i915: Use preempt_disable/enable_rt() where recommended (Mike Galbraith) - lockdep: disable self-test (Sebastian Andrzej Siewior) - lockdep: selftest: fix warnings due to missing PREEMPT_RT conditionals (Josh Cartwright) - lockdep: selftest: Only do hardirq context test for raw spinlock (Yong Zhang) - lockdep: Make it RT aware (Thomas Gleixner) - net: Remove preemption disabling in netif_rx() (Priyanka Jain) - random: Make it work on rt (Thomas Gleixner) - x86: stackprotector: Avoid random pool on rt (Thomas Gleixner) - panic: skip get_random_bytes for RT_FULL in init_oops_id (Thomas Gleixner) - crypto: cryptd - add a lock instead preempt_disable/local_bh_disable (Sebastian Andrzej Siewior) - crypto: limit more FPU-enabled sections (Sebastian Andrzej Siewior) - irqwork: push most work into softirq context (Sebastian Andrzej Siewior) - net: dev: always take qdisc's busylock in __dev_xmit_skb() (Sebastian Andrzej Siewior) - net: Dequeue in dev_cpu_dead() without the lock (Sebastian Andrzej Siewior) - net: Use skbufhead with raw lock (Thomas Gleixner) - debugobjects: Make RT aware (Thomas Gleixner) - fs: namespace: Use cpu_chill() in trylock loops (Thomas Gleixner) - rt: Introduce cpu_chill() (Thomas Gleixner) - sunrpc: Make svc_xprt_do_enqueue() use get_cpu_light() (Mike Galbraith) - scsi/fcoe: Make RT aware. (Thomas Gleixner) - md: raid5: Make raid5_percpu handling RT aware (Thomas Gleixner) - block/mq: do not invoke preempt_disable() (Sebastian Andrzej Siewior) - mm/vmalloc: Another preempt disable region which sucks (Thomas Gleixner) - rcutorture: Avoid problematic critical section nesting on RT (Scott Wood) - locking: Make spinlock_t and rwlock_t a RCU section on RT (Sebastian Andrzej Siewior) - rcu: Delay RCU-selftests (Sebastian Andrzej Siewior) - ptrace: fix ptrace_unfreeze_traced() race with rt-lock (Oleg Nesterov) - ptrace: fix ptrace vs tasklist_lock race (Sebastian Andrzej Siewior) - pid.h: include atomic.h (Grygorii Strashko) - net/core: use local_bh_disable() in netif_rx_ni() (Sebastian Andrzej Siewior) - softirq: Disable softirq stacks for RT (Thomas Gleixner) - softirq: Check preemption after reenabling interrupts (Thomas Gleixner) - sched: Disable TTWU_QUEUE on RT (Thomas Gleixner) - sched: Do not account rcu_preempt_depth on RT in might_sleep() (Thomas Gleixner) - kernel/sched: move stack + kprobe clean up to __put_task_struct() (Sebastian Andrzej Siewior) - sched: Move mmdrop to RCU on RT (Thomas Gleixner) - sched: Limit the number of task migrations per batch (Thomas Gleixner) - wait.h: include atomic.h (Sebastian Andrzej Siewior) - x86: kvm Require const tsc for RT (Thomas Gleixner) - mm/zsmalloc: copy with get_cpu_var() and locking (Mike Galbraith) - mm/memcontrol: Replace local_irq_disable with local locks (Sebastian Andrzej Siewior) - mm/memcontrol: Don't call schedule_work_on in preemption disabled context (Yang Shi) - mm: memcontrol: Provide a local_lock for per-CPU memcg_stock (Sebastian Andrzej Siewior) - mm: slub: Don't enable partial CPU caches on PREEMPT_RT by default (Sebastian Andrzej Siewior) - mm: page_alloc: Use a local_lock instead of explicit local_irq_save(). (Ingo Molnar) - mm: page_alloc: Use migrate_disable() in drain_local_pages_wq() (Sebastian Andrzej Siewior) - mm: slub: Don't resize the location tracking cache on PREEMPT_RT (Sebastian Andrzej Siewior) - mm: slub: Move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context (Sebastian Andrzej Siewior) - mm: slub: Move discard_slab() invocations out of IRQ-off sections (Sebastian Andrzej Siewior) - mm: slub: Enable irqs for __GFP_WAIT (Thomas Gleixner) - mm: slub: Make object_map_lock a raw_spinlock_t (Sebastian Andrzej Siewior) - mm: sl[au]b: Change list_lock to raw_spinlock_t (Thomas Gleixner) - locking: don't check for __LINUX_SPINLOCK_TYPES_H on -RT archs (Sebastian Andrzej Siewior) - trace: Add migrate-disabled counter to tracing output (Thomas Gleixner) - kernel/sched: add {put|get}_cpu_light() (Sebastian Andrzej Siewior) - signal/x86: Delay calling signals in atomic (Oleg Nesterov) - rt: Add local irq locks (Thomas Gleixner) - efi: Allow efi=runtime (Sebastian Andrzej Siewior) - efi: Disable runtime services on RT (Sebastian Andrzej Siewior) - net/core: disable NET_RX_BUSY_POLL on RT (Sebastian Andrzej Siewior) - sched: Disable CONFIG_RT_GROUP_SCHED on RT (Thomas Gleixner) - mm: Allow only SLUB on RT (Ingo Molnar) - kconfig: Disable config options which are not RT compatible (Thomas Gleixner) - net: Properly annotate the try-lock for the seqlock (Sebastian Andrzej Siewior) - net/Qdisc: use a seqlock instead seqcount (Sebastian Andrzej Siewior) - fs/dcache: disable preemption on i_dir_seq's write side (Sebastian Andrzej Siewior) - fs/dcache: use swait_queue instead of waitqueue (Sebastian Andrzej Siewior) - u64_stats: Disable preemption on 32bit-UP/SMP with RT during updates (Sebastian Andrzej Siewior) - mm/memcontrol: Disable preemption in __mod_memcg_lruvec_state() (Sebastian Andrzej Siewior) - mm/vmstat: Protect per cpu variables with preempt disable on RT (Ingo Molnar) - preempt: Provide preempt_*_(no)rt variants (Thomas Gleixner) - signal: Revert ptrace preempt magic (Thomas Gleixner) - locking/rtmutex: Use custom scheduling function for spin-schedule() (Sebastian Andrzej Siewior) - locking/rtmutex: add ww_mutex addon for mutex-rt (Sebastian Andrzej Siewior) - locking/rtmutex: wire up RT's locking (Thomas Gleixner) - locking/rtmutex: add rwlock implementation based on rtmutex (Thomas Gleixner) - locking/rtmutex: add rwsem implementation based on rtmutex (Thomas Gleixner) - locking/rtmutex: add mutex implementation based on rtmutex (Thomas Gleixner) - locking/rtmutex: Allow rt_mutex_trylock() on PREEMPT_RT (Sebastian Andrzej Siewior) - locking/rtmutex: add sleeping lock implementation (Thomas Gleixner) - sched: Add saved_state for tasks blocked on sleeping locks (Thomas Gleixner) - locking/rtmutex: export lockdep-less version of rt_mutex's lock, trylock and unlock (Thomas Gleixner) - locking/rtmutex: Provide rt_mutex_slowlock_locked() (Thomas Gleixner) - locking: split out the rbtree definition (Sebastian Andrzej Siewior) - lockdep: Reduce header files in debug_locks.h (Sebastian Andrzej Siewior) - locking/rtmutex: Avoid include hell (Thomas Gleixner) - locking/spinlock: Split the lock types header (Thomas Gleixner) - futex: Fix bug on when a requeued RT task times out (Steven Rostedt) - locking/rtmutex: Handle the various new futex race conditions (Thomas Gleixner) - tasklets: Switch tasklet_disable() to the sleep wait variant (Thomas Gleixner) - tasklets: Use spin wait in tasklet_disable() temporarily (Thomas Gleixner) - smp: Wake ksoftirqd on PREEMPT_RT instead do_softirq(). (Sebastian Andrzej Siewior) - tcp: Remove superfluous BH-disable around listening_hash (Sebastian Andrzej Siewior) - net: Move lockdep where it belongs (Thomas Gleixner) - shmem: Use raw_spinlock_t for ->stat_lock (Sebastian Andrzej Siewior) - mm: workingset: replace IRQ-off check with a lockdep assert. (Sebastian Andrzej Siewior) - cgroup: use irqsave in cgroup_rstat_flush_locked() (Sebastian Andrzej Siewior) - printk: add pr_flush() (John Ogness) - printk: add console handover (John Ogness) - printk: remove deferred printing (John Ogness) - printk: move console printing to kthreads (John Ogness) - printk: introduce kernel sync mode (John Ogness) - printk: use seqcount_latch for console_seq (John Ogness) - printk: combine boot_delay_msec() into printk_delay() (John Ogness) - printk: relocate printk_delay() and vprintk_default() (John Ogness) - serial: 8250: implement write_atomic (John Ogness) - kdb: only use atomic consoles for output mirroring (John Ogness) - console: add write_atomic interface (John Ogness) - printk: convert @syslog_lock to spin_lock (John Ogness) - printk: remove safe buffers (John Ogness) - printk: track/limit recursion (John Ogness) - notifier: Make atomic_notifiers use raw_spinlock (Valentin Schneider) - genirq: Move prio assignment into the newly created thread (Thomas Gleixner) - kthread: Move prio/affinite change into the newly created thread (Sebastian Andrzej Siewior) - timers: Move clearing of base::timer_running under base::lock (Thomas Gleixner) - highmem: Don't disable preemption on RT in kmap_atomic() (Sebastian Andrzej Siewior) - bpf: Fix unprivileged_bpf_disabled setup (Jiri Olsa) - Enable CONFIG_BPF_UNPRIV_DEFAULT_OFF (Jiri Olsa) Resolves: rhbz#1891873 --- Makefile.rhelver | 4 +-- kernel-rt-x86_64-debug-rhel.config | 22 ++++++++------ kernel-rt-x86_64-rhel.config | 22 ++++++++------ kernel.spec | 47 +++++++++++++++++++++--------- sources | 6 ++-- 5 files changed, 65 insertions(+), 36 deletions(-) diff --git a/Makefile.rhelver b/Makefile.rhelver index 79a6c6b..fc53aa3 100644 --- a/Makefile.rhelver +++ b/Makefile.rhelver @@ -12,7 +12,7 @@ RHEL_MINOR = 99 # # Use this spot to avoid future merge conflicts. # Do not trim this comment. -RHEL_RELEASE = 25 +RHEL_RELEASE = 33 # # Early y+1 numbering @@ -44,4 +44,4 @@ ifneq ("$(ZSTREAM)", "yes") endif endif -RTBUILD:=.3 +RTBUILD:=.4 diff --git a/kernel-rt-x86_64-debug-rhel.config b/kernel-rt-x86_64-debug-rhel.config index 8d48edc..fb82757 100644 --- a/kernel-rt-x86_64-debug-rhel.config +++ b/kernel-rt-x86_64-debug-rhel.config @@ -467,6 +467,7 @@ CONFIG_BPF_LSM=y # CONFIG_BPF_PRELOAD is not set CONFIG_BPF_STREAM_PARSER=y CONFIG_BPF_SYSCALL=y +CONFIG_BPF_UNPRIV_DEFAULT_OFF=y CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_BRCMDBG is not set CONFIG_BRCMFMAC=m @@ -917,8 +918,8 @@ CONFIG_CRYPTO_DRBG_HASH=y CONFIG_CRYPTO_DRBG_HMAC=y CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECDSA=m +CONFIG_CRYPTO_ECDH=y +CONFIG_CRYPTO_ECDSA=y CONFIG_CRYPTO_ECHAINIV=m # CONFIG_CRYPTO_ECRDSA is not set CONFIG_CRYPTO_ESSIV=m @@ -2021,6 +2022,7 @@ CONFIG_HID_RMI=m CONFIG_HID_ROCCAT=m CONFIG_HID_SAITEK=m CONFIG_HID_SAMSUNG=m +# CONFIG_HID_SEMITEK is not set CONFIG_HID_SENSOR_ACCEL_3D=m CONFIG_HID_SENSOR_ALS=m # CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set @@ -2322,15 +2324,16 @@ CONFIG_INET6_ESP_OFFLOAD=m CONFIG_INET6_IPCOMP=m CONFIG_INET_AH=m # CONFIG_INET_DIAG_DESTROY is not set -CONFIG_INET_DIAG=m +CONFIG_INET_DIAG=y CONFIG_INET_ESPINTCP=y CONFIG_INET_ESP=m CONFIG_INET_ESP_OFFLOAD=m CONFIG_INET_IPCOMP=m -CONFIG_INET_MPTCP_DIAG=m -CONFIG_INET_RAW_DIAG=m +CONFIG_INET_MPTCP_DIAG=y +CONFIG_INET_RAW_DIAG=y +CONFIG_INET_TCP_DIAG=y CONFIG_INET_TUNNEL=m -CONFIG_INET_UDP_DIAG=m +CONFIG_INET_UDP_DIAG=y CONFIG_INET=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_BNXT_RE=m @@ -3695,7 +3698,7 @@ CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_NET_L3_MASTER_DEV=y CONFIG_NETLABEL=y -CONFIG_NETLINK_DIAG=m +CONFIG_NETLINK_DIAG=y CONFIG_NET_MPLS_GSO=y # CONFIG_NET_NCSI is not set CONFIG_NET_NSH=y @@ -4082,7 +4085,7 @@ CONFIG_OVERLAY_FS=m # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set # CONFIG_OVERLAY_FS_XINO_AUTO is not set # CONFIG_PA12203001 is not set -CONFIG_PACKET_DIAG=m +CONFIG_PACKET_DIAG=y CONFIG_PACKET=y # CONFIG_PACKING is not set CONFIG_PAGE_EXTENSION=y @@ -5839,6 +5842,7 @@ CONFIG_SYSTEM_BLACKLIST_HASH_LIST="" # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set # CONFIG_SYSTEMPORT is not set +# CONFIG_SYSTEM_REVOCATION_KEYS is not set # CONFIG_SYSTEM_REVOCATION_LIST is not set CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" @@ -6167,7 +6171,7 @@ CONFIG_UIO_PCI_GENERIC=m # CONFIG_UNISYSSPAR is not set # CONFIG_UNISYS_VISORBUS is not set CONFIG_UNIX98_PTYS=y -CONFIG_UNIX_DIAG=m +CONFIG_UNIX_DIAG=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_UNIX=y # CONFIG_UNUSED_SYMBOLS is not set diff --git a/kernel-rt-x86_64-rhel.config b/kernel-rt-x86_64-rhel.config index ac43cf9..06c40b7 100644 --- a/kernel-rt-x86_64-rhel.config +++ b/kernel-rt-x86_64-rhel.config @@ -467,6 +467,7 @@ CONFIG_BPF_LSM=y # CONFIG_BPF_PRELOAD is not set CONFIG_BPF_STREAM_PARSER=y CONFIG_BPF_SYSCALL=y +CONFIG_BPF_UNPRIV_DEFAULT_OFF=y CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_BRCMDBG is not set CONFIG_BRCMFMAC=m @@ -917,8 +918,8 @@ CONFIG_CRYPTO_DRBG_HASH=y CONFIG_CRYPTO_DRBG_HMAC=y CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECDSA=m +CONFIG_CRYPTO_ECDH=y +CONFIG_CRYPTO_ECDSA=y CONFIG_CRYPTO_ECHAINIV=m # CONFIG_CRYPTO_ECRDSA is not set CONFIG_CRYPTO_ESSIV=m @@ -2005,6 +2006,7 @@ CONFIG_HID_RMI=m CONFIG_HID_ROCCAT=m CONFIG_HID_SAITEK=m CONFIG_HID_SAMSUNG=m +# CONFIG_HID_SEMITEK is not set CONFIG_HID_SENSOR_ACCEL_3D=m CONFIG_HID_SENSOR_ALS=m # CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set @@ -2306,15 +2308,16 @@ CONFIG_INET6_ESP_OFFLOAD=m CONFIG_INET6_IPCOMP=m CONFIG_INET_AH=m # CONFIG_INET_DIAG_DESTROY is not set -CONFIG_INET_DIAG=m +CONFIG_INET_DIAG=y CONFIG_INET_ESPINTCP=y CONFIG_INET_ESP=m CONFIG_INET_ESP_OFFLOAD=m CONFIG_INET_IPCOMP=m -CONFIG_INET_MPTCP_DIAG=m -CONFIG_INET_RAW_DIAG=m +CONFIG_INET_MPTCP_DIAG=y +CONFIG_INET_RAW_DIAG=y +CONFIG_INET_TCP_DIAG=y CONFIG_INET_TUNNEL=m -CONFIG_INET_UDP_DIAG=m +CONFIG_INET_UDP_DIAG=y CONFIG_INET=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_BNXT_RE=m @@ -3676,7 +3679,7 @@ CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_NET_L3_MASTER_DEV=y CONFIG_NETLABEL=y -CONFIG_NETLINK_DIAG=m +CONFIG_NETLINK_DIAG=y CONFIG_NET_MPLS_GSO=y # CONFIG_NET_NCSI is not set CONFIG_NET_NSH=y @@ -4063,7 +4066,7 @@ CONFIG_OVERLAY_FS=m # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set # CONFIG_OVERLAY_FS_XINO_AUTO is not set # CONFIG_PA12203001 is not set -CONFIG_PACKET_DIAG=m +CONFIG_PACKET_DIAG=y CONFIG_PACKET=y # CONFIG_PACKING is not set # CONFIG_PAGE_EXTENSION is not set @@ -5817,6 +5820,7 @@ CONFIG_SYSTEM_BLACKLIST_HASH_LIST="" # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set # CONFIG_SYSTEMPORT is not set +# CONFIG_SYSTEM_REVOCATION_KEYS is not set # CONFIG_SYSTEM_REVOCATION_LIST is not set CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" @@ -6145,7 +6149,7 @@ CONFIG_UIO_PCI_GENERIC=m # CONFIG_UNISYSSPAR is not set # CONFIG_UNISYS_VISORBUS is not set CONFIG_UNIX98_PTYS=y -CONFIG_UNIX_DIAG=m +CONFIG_UNIX_DIAG=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_UNIX=y # CONFIG_UNUSED_SYMBOLS is not set diff --git a/kernel.spec b/kernel.spec index 1f8b0c7..5310a8b 100755 --- a/kernel.spec +++ b/kernel.spec @@ -73,7 +73,7 @@ Summary: The Linux kernel # the --with-release option overrides this setting.) %define debugbuildsenabled 1 -%global distro_build 0.rc3.25 +%global distro_build 0.rc4.33 %if 0%{?fedora} %define secure_boot_arch x86_64 @@ -117,13 +117,13 @@ Summary: The Linux kernel %define kversion 5.13 %define rpmversion 5.13.0 -%define pkgrelease 0.rc3.25.rt3.3 +%define pkgrelease 0.rc4.33.rt3.4 # This is needed to do merge window version magic %define patchlevel 13 # allow pkg_release to have configurable %%{?dist} tag -%define specrelease 0.rc3.25.rt3.3%{?buildid}%{?dist} +%define specrelease 0.rc4.33.rt3.4%{?buildid}%{?dist} %define pkg_release %{specrelease} @@ -543,6 +543,9 @@ ExclusiveOS: Linux %ifnarch %{nobuildarches} Requires: %{name}-core-uname-r = %{KVERREL} Requires: %{name}-modules-uname-r = %{KVERREL} +%if %{with_realtime} +Requires: realtime-setup +%endif %endif @@ -571,6 +574,7 @@ BuildRequires: audit-libs-devel BuildRequires: java-devel BuildRequires: libbpf-devel BuildRequires: libbabeltrace-devel +BuildRequires: libtraceevent-devel %ifnarch %{arm} s390x BuildRequires: numactl-devel %endif @@ -648,7 +652,7 @@ BuildRequires: clang # exact git commit you can run # # xzcat -qq ${TARBALL} | git get-tar-commit-id -Source0: linux-5.13.0-0.rc3.25.rt3.3.tar.xz +Source0: linux-5.13.0-0.rc4.33.rt3.4.tar.xz Source1: Makefile.rhelver @@ -913,7 +917,7 @@ This package provides debug information for the perf package. # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. -%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/traceevent/plugins/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list} +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list} %package -n python3-perf Summary: Python bindings for apps which will manipulate perf events @@ -1358,8 +1362,8 @@ ApplyOptionalPatch() fi } -%setup -q -n kernel-5.13.0-0.rc3.25.rt3.3 -c -mv linux-5.13.0-0.rc3.25.rt3.3 linux-%{KVERREL} +%setup -q -n kernel-5.13.0-0.rc4.33.rt3.4 -c +mv linux-5.13.0-0.rc4.33.rt3.4 linux-%{KVERREL} cd linux-%{KVERREL} cp -a %{SOURCE1} . @@ -2165,7 +2169,7 @@ InitBuildVars %endif %global perf_make \ - %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 prefix=%{_prefix} PYTHON=%{__python3} + %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 prefix=%{_prefix} PYTHON=%{__python3} %if %{with_perf} # perf # make sure check-headers.sh is executable @@ -2378,7 +2382,7 @@ tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH %if %{with_perf} # perf tool binary and supporting scripts/binaries -%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin install-traceevent-plugins +%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin # remove the 'trace' symlink. rm -f %{buildroot}%{_bindir}/trace @@ -2713,8 +2717,7 @@ fi %files -n perf %{_bindir}/perf %{_libdir}/libperf-jvmti.so -%dir %{_libdir}/traceevent/plugins -%{_libdir}/traceevent/plugins/* +%exclude %{_libdir}/traceevent %dir %{_libexecdir}/perf-core %{_libexecdir}/perf-core/* %{_datadir}/perf-core/* @@ -2919,8 +2922,11 @@ fi # # %changelog -* Wed May 26 2021 Juri Lelli [5.13.0-0.rc3.25.rt3.3] -- kernel-5.13.0-0.rc3.25.el9 rebase +* Thu Jun 03 2021 Juri Lelli [5.13.0-0.rc4.33.rt3.4] +- kernel-5.13.0-0.rc4.33.el9 rebase +- Revert "eventfd: track eventfd_signal() recursion depth" (Juri Lelli) +- Revert "aio: prevent potential eventfd recursion on poll" (Juri Lelli) +- redhat: Add realtime-setup dependecy for kernel-rt metapackage (Juri Lelli) [1937013] - spec: Generate separate kernel-rt-kvm packages (Juri Lelli) - Add RT config options (Juri Lelli) - specfile: Add with_realtime (Juri Lelli) @@ -3074,6 +3080,21 @@ fi - kthread: Move prio/affinite change into the newly created thread (Sebastian Andrzej Siewior) - timers: Move clearing of base::timer_running under base::lock (Thomas Gleixner) - highmem: Don't disable preemption on RT in kmap_atomic() (Sebastian Andrzej Siewior) +- bpf: Fix unprivileged_bpf_disabled setup (Jiri Olsa) +- Enable CONFIG_BPF_UNPRIV_DEFAULT_OFF (Jiri Olsa) + +* Tue Jun 01 2021 Fedora Kernel Team [5.13.0-0.rc4.20210601gitc2131f7e73c9.32] +- configs/common/s390: disable CONFIG_QETH_{OSN,OSX} (Philipp Rudo) [1903201] + +* Fri May 28 2021 Fedora Kernel Team [5.13.0-0.rc3.20210528git97e5bf604b7a.28] +- nvme: nvme_mpath_init remove multipath check (Mike Snitzer) + +* Wed May 26 2021 Fedora Kernel Team [5.13.0-0.rc3.20210526gitad9f25d33860.27] +- team: mark team driver as deprecated (Hangbin Liu) [1945477] + +* Tue May 25 2021 Fedora Kernel Team [5.13.0-0.rc3.20210525gita050a6d2b7e8.26] +- Make CRYPTO_EC also builtin (Simo Sorce) [1947240] +- Do not hard-code a default value for DIST (David Ward) * Mon May 24 2021 Fedora Kernel Team [5.13.0-0.rc3.25] - Override %%{debugbuildsenabled} if the --with-release option is used (David Ward) diff --git a/sources b/sources index 8eb053d..4941df6 100644 --- a/sources +++ b/sources @@ -1,3 +1,3 @@ -SHA512 (linux-5.13.0-0.rc3.25.rt3.3.tar.xz) = 8cb53dcfbfa1d8f96195ebfcf2b8d656797d4f3ff078127cd8ffece5a2d20bb57f211292fc1388414cbca41f3701f9410725040ee51edb216732969b4b410d59 -SHA512 (kernel-abi-whitelists-5.13.0-0.rc3.25.tar.bz2) = 5a1976224fc32b9c3bbaef862246532a864ba39577a27a608349164c51b677a2d2645925896cae3356ddaa940647c386d1f327ccccdc6a97eb09309c15067958 -SHA512 (kernel-kabi-dw-5.13.0-0.rc3.25.tar.bz2) = e45b300507ec12349a8254c8768cc7dda92a37e9b65da75435451bb54b95e4969ea8391be88e6d375adf603d2835196ca4bf4c33479e92f55970264b72d39522 +SHA512 (linux-5.13.0-0.rc4.33.rt3.4.tar.xz) = 5448dc79f70b84ed0bf08b04433617c7bff68b603912cabdf169a7f32d30897b8135601eaea5ebac9ab2ad51c2baa5395b2064dbec87f10a2c258d2afe0e1f65 +SHA512 (kernel-abi-whitelists-5.13.0-0.rc4.33.tar.bz2) = df7944a99d473058b440ae04fad11cbbbd7de9513577dddf9a25c403cc8b857ba952670b25ce1394ba51e4a506cb594533558e3f9b51b929ff740ae5b5f0a740 +SHA512 (kernel-kabi-dw-5.13.0-0.rc4.33.tar.bz2) = da2010c48aefc88383605e7df741c1d61349a96b41adf72255a74b07ad027e12b8780d10bed8608156070a1b55535687f7dd237aa584e2d84759e125e2926cf1