rpms/kernel-rt
7
0
Fork 0
Code Issues Pull Requests Releases Activity

kernel-rt-5.14.0-76.rt21.76.el9

Browse Source 
* Wed Mar 30 2022 Fernando Pacheco <fpacheco@redhat.com> [5.14.0-76.rt21.76.el9]
- [rt] build kernel-rt-5.14.0-76.rt21.76.el9 [2061574]
- Revert "Merge: kernel/futex: backport new futex_waitv(2) system call" (Fernando Pacheco)
- vdpa/mlx5: Fix tracking of current number of VQs (Cindy Lu) [2055451]
- vdpa/mlx5: Fix is_index_valid() to refer to features (Cindy Lu) [2055451]
- vdpa: Protect vdpa reset with cf_mutex (Cindy Lu) [2055451]
- vdpa: Avoid taking cf_mutex lock on get status (Cindy Lu) [2055451]
- vdpa/vdpa_sim_net: Report max device capabilities (Cindy Lu) [2055451]
- vdpa: Use BIT_ULL for bit operations (Cindy Lu) [2055451]
- vdpa/vdpa_sim: Configure max supported virtqueues (Cindy Lu) [2055451]
- vdpa/mlx5: Report max device capabilities (Cindy Lu) [2055451]
- vdpa: Support reporting max device capabilities (Cindy Lu) [2055451]
- vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() (Cindy Lu) [2055451]
- vdpa: Add support for returning device configuration information (Cindy Lu) [2055451]
- vdpa/mlx5: Support configuring max data virtqueue (Cindy Lu) [2055451]
- vdpa/mlx5: Fix config_attr_mask assignment (Cindy Lu) [2055451]
- vdpa: Allow to configure max data virtqueues (Cindy Lu) [2055451]
- vdpa: Read device configuration only if FEATURES_OK (Cindy Lu) [2055451]
- vdpa: Sync calls set/get config/status with cf_mutex (Cindy Lu) [2055451]
- vdpa/mlx5: Distribute RX virtqueues in RQT object (Cindy Lu) [2055451]
- vdpa: Provide interface to read driver features (Cindy Lu) [2055451]
- vdpa: clean up get_config_size ret value handling (Cindy Lu) [2055451]
- vdpa/mlx5: Fix wrong configuration of virtio_version_1_0 (Cindy Lu) [2055451]
- vdpa: Mark vdpa_config_ops.get_vq_notification as optional (Cindy Lu) [2055451]
- vdpa: Avoid duplicate call to vp_vdpa get_status (Cindy Lu) [2055451]
- net/mlx5_vdpa: Offer VIRTIO_NET_F_MTU when setting MTU (Cindy Lu) [2055451]
- vdpa: add driver_override support (Cindy Lu) [2055451]
- docs: document sysfs ABI for vDPA bus (Cindy Lu) [2055451]
- ifcvf/vDPA: fix misuse virtio-net device config size for blk dev (Cindy Lu) [2055451]
- vdpa: Consider device id larger than 31 (Cindy Lu) [2055451]
- virtio: always enter drivers/virtio/ (Cindy Lu) [2055451]
- vdpa: check that offsets are within bounds (Cindy Lu) [2055451]
- vdpa_sim: avoid putting an uninitialized iova_domain (Cindy Lu) [2055451]
- vhost-vdpa: clean irqs before reseting vdpa device (Cindy Lu) [2055451]
- vdpa/mlx5: Forward only packets with allowed MAC address (Cindy Lu) [2055451]
- vdpa/mlx5: Support configuration of MAC (Cindy Lu) [2055451]
- vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit (Cindy Lu) [2055451]
- vdpa_sim_net: Enable user to set mac address and mtu (Cindy Lu) [2055451]
- vdpa: Enable user to set mac and mtu of vdpa device (Cindy Lu) [2055451]
- vdpa: Use kernel coding style for structure comments (Cindy Lu) [2055451]
- vdpa: Introduce query of device config layout (Cindy Lu) [2055451]
- vdpa: Introduce and use vdpa device get, set config helpers (Cindy Lu) [2055451]
- vdpa/mlx5: Propagate link status from device to vdpa driver (Cindy Lu) [2055451]
- vdpa/mlx5: Rename control VQ workqueue to vdpa wq (Cindy Lu) [2055451]
- vdpa/mlx5: Remove mtu field from vdpa net device (Cindy Lu) [2055451]
- vdpa: add new attribute VDPA_ATTR_DEV_MIN_VQ_SIZE (Cindy Lu) [2055451]
- virtio_vdpa: setup correct vq size with callbacks get_vq_num_{max,min} (Cindy Lu) [2055451]
- vdpa: min vq num of vdpa device cannot be greater than max vq num (Cindy Lu) [2055451]
- vdpa: add new callback get_vq_num_min in vdpa_config_ops (Cindy Lu) [2055451]
- vp_vdpa: add vq irq offloading support (Cindy Lu) [2055451]
- vdpa: fix typo (Cindy Lu) [2055451]
- vhost-vdpa: Fix the wrong input in config_cb (Cindy Lu) [2055451]
- vhost_vdpa: unset vq irq before freeing irq (Cindy Lu) [2055451]
- vdpa: potential uninitialized return in vhost_vdpa_va_map() (Cindy Lu) [2055451]
- vdpa/mlx5: Avoid executing set_vq_ready() if device is reset (Cindy Lu) [2055451]
- vdpa/mlx5: Clear ready indication for control VQ (Cindy Lu) [2055451]
- vdpa: Support transferring virtual addressing during DMA mapping (Cindy Lu) [2055451]
- vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() (Cindy Lu) [2055451]
- vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() (Cindy Lu) [2055451]
- vhost-iotlb: Add an opaque pointer for vhost IOTLB (Cindy Lu) [2055451]
- vhost-vdpa: Handle the failure of vdpa_reset() (Cindy Lu) [2055451]
- vdpa: Add reset callback in vdpa_config_ops (Cindy Lu) [2055451]
- vdpa: Fix some coding style issues (Cindy Lu) [2055451]
- vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro (Cindy Lu) [2055451]
- vdpa/mlx5: Add multiqueue support (Cindy Lu) [2055451]
- vdpa/mlx5: Add support for control VQ and MAC setting (Cindy Lu) [2055451]
- vdpa/mlx5: Ensure valid indices are provided (Cindy Lu) [2055451]
- vdpa/mlx5: Decouple virtqueue callback from struct mlx5_vdpa_virtqueue (Cindy Lu) [2055451]
- vdpa/mlx5: function prototype modifications in preparation to control VQ (Cindy Lu) [2055451]
- vdpa/mlx5: Remove redundant header file inclusion (Cindy Lu) [2055451]
- vDPA/ifcvf: enable multiqueue and control vq (Cindy Lu) [2055451]
- vDPA/ifcvf: detect and use the onboard number of queues directly (Cindy Lu) [2055451]
- vDPA/ifcvf: implement management netlink framework for ifcvf (Cindy Lu) [2055451]
- vDPA/ifcvf: introduce get_dev_type() which returns virtio dev id (Cindy Lu) [2055451]
- x86/hyperv: Output host build info as normal Windows version number (Vitaly Kuznetsov) [2060708]
- lib/irq_poll: Declare IRQ_POLL softirq vector as ksoftirqd-parking safe (Desnes A. Nunes do Rosario) [2059555]
- tick/rcu: Stop allowing RCU_SOFTIRQ in idle (Desnes A. Nunes do Rosario) [2059555]
- tick/rcu: Remove obsolete rcu_needs_cpu() parameters (Desnes A. Nunes do Rosario) [2059555]
- tick: Detect and fix jiffies update stall (Desnes A. Nunes do Rosario) [2059555]
- rcu: Move rcu_needs_cpu() to tree.c (Desnes A. Nunes do Rosario) [2059555]
- rcu: Remove the RCU_FAST_NO_HZ Kconfig option (Desnes A. Nunes do Rosario) [2059555]
- torture: Remove RCU_FAST_NO_HZ from rcu scenarios (Desnes A. Nunes do Rosario) [2059555]
- torture: Remove RCU_FAST_NO_HZ from rcuscale and refscale scenarios (Desnes A. Nunes do Rosario) [2059555]
- copy_process(): Move fd_install() out of sighand->siglock critical section (Waiman Long) [2051855]
- redhat/configs: enable CONFIG_INTEL_VSEC for x86 (David Arcari) [2058806]
- platform/x86/intel: Move intel_pmt from MFD to Auxiliary Bus (David Arcari) [2058806]
- platform/x86: intel_pmt_telemetry: Ignore zero sized entries (David Arcari) [2058806]
- platform/x86/intel: Move Intel PMT drivers to new subfolder (David Arcari) [2058806]
- driver core: auxiliary bus: Add driver data helpers (David Arcari) [2058806]
- PCI: Add #defines for accessing PCIe DVSEC fields (David Arcari) [2058806]
- tools headers UAPI: Sync powerpc syscall table file changed by new futex_waitv syscall (Joel Savitz) [2038794]
- tools headers UAPI: Sync s390 syscall table file changed by new futex_waitv syscall (Joel Savitz) [2038794]
- futex: Wireup futex_waitv syscall (Joel Savitz) [2038794]
- tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall (Joel Savitz) [2038794]
- parisc: Wire up futex_waitv (Joel Savitz) [2038794]
- s390: wire up sys_futex_waitv system call (Joel Savitz) [2038794]
- MIPS: syscalls: Wire up futex_waitv syscall (Joel Savitz) [2038794]
- tools headers UAPI: Sync files changed by new futex_waitv syscall (Joel Savitz) [2038794]
- futex2: Documentation: Document sys_futex_waitv() uAPI (Joel Savitz) [2038794]
- selftests: futex: Test sys_futex_waitv() wouldblock (Joel Savitz) [2038794]
- selftests: futex: Test sys_futex_waitv() timeout (Joel Savitz) [2038794]
- selftests: futex: Add sys_futex_waitv() test (Joel Savitz) [2038794]
- futex,arm: Wire up sys_futex_waitv() (Joel Savitz) [2038794]
- futex,x86: Wire up sys_futex_waitv() (Joel Savitz) [2038794]
- futex: Implement sys_futex_waitv() (Joel Savitz) [2038794]
- futex: Simplify double_lock_hb() (Joel Savitz) [2038794]
- futex: Split out wait/wake (Joel Savitz) [2038794]
- futex: Split out requeue (Joel Savitz) [2038794]
- futex: Rename mark_wake_futex() (Joel Savitz) [2038794]
- futex: Rename: match_futex() (Joel Savitz) [2038794]
- futex: Rename: hb_waiter_{inc,dec,pending}() (Joel Savitz) [2038794]
- futex: Split out PI futex (Joel Savitz) [2038794]
- futex: Rename: {get,cmpxchg}_futex_value_locked() (Joel Savitz) [2038794]
- futex: Rename hash_futex() (Joel Savitz) [2038794]
- futex: Rename __unqueue_futex() (Joel Savitz) [2038794]
- futex: Rename: queue_{,un}lock() (Joel Savitz) [2038794]
- futex: Rename futex_wait_queue_me() (Joel Savitz) [2038794]
- futex: Rename {,__}{,un}queue_me() (Joel Savitz) [2038794]
- futex: Split out syscalls (Joel Savitz) [2038794]
- futex: Move to kernel/futex/ (Joel Savitz) [2038794]
- cifs: fix double free race when mount fails in cifs_get_root() (Ronnie Sahlberg) [1979175]
Resolves: rhbz#2061574, rhbz#2060708, rhbz#2059555, rhbz#2051855, rhbz#2058806, rhbz#2038794, rhbz#1979175

Signed-off-by: Fernando Pacheco <fpacheco@redhat.com>
This commit is contained in:
Fernando Pacheco 2022-03-30 16:28:11 -07:00
parent 38ec5ccaba
commit 36a5e91dc0
5 changed files with 136 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Makefile.rhelver
View File

@ -12,7 +12,7 @@ RHEL_MINOR = 1
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 75
RHEL_RELEASE = 76
#
# ZSTREAM
@ -66,4 +66,4 @@ ifneq ("$(ZSTREAM)", "yes")
endif
endif
RTBUILD:=.75
RTBUILD:=.76

2
kernel-rt-x86_64-debug-rhel.config
View File

@ -2323,6 +2323,7 @@ CONFIG_INTEL_TURBO_MAX_3=y
CONFIG_INTEL_TXT=y
CONFIG_INTEL_UNCORE_FREQ_CONTROL=m
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_VSEC=m
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m
CONFIG_INTEL_XWAY_PHY=m
@ -2954,7 +2955,6 @@ CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_MFD_INTEL_LPSS=y
# CONFIG_MFD_INTEL_M10_BMC is not set
# CONFIG_MFD_INTEL_PMC_BXT is not set
CONFIG_MFD_INTEL_PMT=m
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set

2
kernel-rt-x86_64-rhel.config
View File

@ -2307,6 +2307,7 @@ CONFIG_INTEL_TURBO_MAX_3=y
CONFIG_INTEL_TXT=y
CONFIG_INTEL_UNCORE_FREQ_CONTROL=m
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_VSEC=m
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m
CONFIG_INTEL_XWAY_PHY=m
@ -2934,7 +2935,6 @@ CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_MFD_INTEL_LPSS=y
# CONFIG_MFD_INTEL_M10_BMC is not set
# CONFIG_MFD_INTEL_PMC_BXT is not set
CONFIG_MFD_INTEL_PMT=m
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set

136
kernel.spec
View File

@ -121,13 +121,13 @@ Summary: The Linux kernel
%define kversion 5.14
%define rpmversion 5.14.0
%define pkgrelease 75.rt21.75.el9
%define pkgrelease 76.rt21.76.el9
# This is needed to do merge window version magic
%define patchlevel 14
# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 75.rt21.75%{?buildid}%{?dist}
%define specrelease 76.rt21.76%{?buildid}%{?dist}
%define pkg_release %{specrelease}
@ -704,7 +704,7 @@ BuildRequires: lld
# exact git commit you can run
#
# xzcat -qq ${TARBALL} | git get-tar-commit-id
Source0: linux-5.14.0-75.rt21.75.el9.tar.xz
Source0: linux-5.14.0-76.rt21.76.el9.tar.xz
Source1: Makefile.rhelver
@ -1417,8 +1417,8 @@ ApplyOptionalPatch()
fi
}
%setup -q -n kernel-5.14.0-75.rt21.75.el9 -c
mv linux-5.14.0-75.rt21.75.el9 linux-%{KVERREL}
%setup -q -n kernel-5.14.0-76.rt21.76.el9 -c
mv linux-5.14.0-76.rt21.76.el9 linux-%{KVERREL}
cd linux-%{KVERREL}
cp -a %{SOURCE1} .
@ -3095,8 +3095,130 @@ fi
#
#
%changelog
* Mon Mar 28 2022 Fernando Pacheco <fpacheco@redhat.com> [5.14.0-75.rt21.75.el9]
- [rt] build kernel-rt-5.14.0-75.rt21.75.el9 [2061574]
* Wed Mar 30 2022 Fernando Pacheco <fpacheco@redhat.com> [5.14.0-76.rt21.76.el9]
- [rt] build kernel-rt-5.14.0-76.rt21.76.el9 [2061574]
* Wed Mar 30 2022 Fernando Pacheco <fpacheco@redhat.com> [5.14.0-76.rt21.76.el9]
- [rt] build kernel-rt-5.14.0-76.rt21.76.el9 [2061574]
- Revert "Merge: kernel/futex: backport new futex_waitv(2) system call" (Fernando Pacheco)
- vdpa/mlx5: Fix tracking of current number of VQs (Cindy Lu) [2055451]
- vdpa/mlx5: Fix is_index_valid() to refer to features (Cindy Lu) [2055451]
- vdpa: Protect vdpa reset with cf_mutex (Cindy Lu) [2055451]
- vdpa: Avoid taking cf_mutex lock on get status (Cindy Lu) [2055451]
- vdpa/vdpa_sim_net: Report max device capabilities (Cindy Lu) [2055451]
- vdpa: Use BIT_ULL for bit operations (Cindy Lu) [2055451]
- vdpa/vdpa_sim: Configure max supported virtqueues (Cindy Lu) [2055451]
- vdpa/mlx5: Report max device capabilities (Cindy Lu) [2055451]
- vdpa: Support reporting max device capabilities (Cindy Lu) [2055451]
- vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() (Cindy Lu) [2055451]
- vdpa: Add support for returning device configuration information (Cindy Lu) [2055451]
- vdpa/mlx5: Support configuring max data virtqueue (Cindy Lu) [2055451]
- vdpa/mlx5: Fix config_attr_mask assignment (Cindy Lu) [2055451]
- vdpa: Allow to configure max data virtqueues (Cindy Lu) [2055451]
- vdpa: Read device configuration only if FEATURES_OK (Cindy Lu) [2055451]
- vdpa: Sync calls set/get config/status with cf_mutex (Cindy Lu) [2055451]
- vdpa/mlx5: Distribute RX virtqueues in RQT object (Cindy Lu) [2055451]
- vdpa: Provide interface to read driver features (Cindy Lu) [2055451]
- vdpa: clean up get_config_size ret value handling (Cindy Lu) [2055451]
- vdpa/mlx5: Fix wrong configuration of virtio_version_1_0 (Cindy Lu) [2055451]
- vdpa: Mark vdpa_config_ops.get_vq_notification as optional (Cindy Lu) [2055451]
- vdpa: Avoid duplicate call to vp_vdpa get_status (Cindy Lu) [2055451]
- net/mlx5_vdpa: Offer VIRTIO_NET_F_MTU when setting MTU (Cindy Lu) [2055451]
- vdpa: add driver_override support (Cindy Lu) [2055451]
- docs: document sysfs ABI for vDPA bus (Cindy Lu) [2055451]
- ifcvf/vDPA: fix misuse virtio-net device config size for blk dev (Cindy Lu) [2055451]
- vdpa: Consider device id larger than 31 (Cindy Lu) [2055451]
- virtio: always enter drivers/virtio/ (Cindy Lu) [2055451]
- vdpa: check that offsets are within bounds (Cindy Lu) [2055451]
- vdpa_sim: avoid putting an uninitialized iova_domain (Cindy Lu) [2055451]
- vhost-vdpa: clean irqs before reseting vdpa device (Cindy Lu) [2055451]
- vdpa/mlx5: Forward only packets with allowed MAC address (Cindy Lu) [2055451]
- vdpa/mlx5: Support configuration of MAC (Cindy Lu) [2055451]
- vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit (Cindy Lu) [2055451]
- vdpa_sim_net: Enable user to set mac address and mtu (Cindy Lu) [2055451]
- vdpa: Enable user to set mac and mtu of vdpa device (Cindy Lu) [2055451]
- vdpa: Use kernel coding style for structure comments (Cindy Lu) [2055451]
- vdpa: Introduce query of device config layout (Cindy Lu) [2055451]
- vdpa: Introduce and use vdpa device get, set config helpers (Cindy Lu) [2055451]
- vdpa/mlx5: Propagate link status from device to vdpa driver (Cindy Lu) [2055451]
- vdpa/mlx5: Rename control VQ workqueue to vdpa wq (Cindy Lu) [2055451]
- vdpa/mlx5: Remove mtu field from vdpa net device (Cindy Lu) [2055451]
- vdpa: add new attribute VDPA_ATTR_DEV_MIN_VQ_SIZE (Cindy Lu) [2055451]
- virtio_vdpa: setup correct vq size with callbacks get_vq_num_{max,min} (Cindy Lu) [2055451]
- vdpa: min vq num of vdpa device cannot be greater than max vq num (Cindy Lu) [2055451]
- vdpa: add new callback get_vq_num_min in vdpa_config_ops (Cindy Lu) [2055451]
- vp_vdpa: add vq irq offloading support (Cindy Lu) [2055451]
- vdpa: fix typo (Cindy Lu) [2055451]
- vhost-vdpa: Fix the wrong input in config_cb (Cindy Lu) [2055451]
- vhost_vdpa: unset vq irq before freeing irq (Cindy Lu) [2055451]
- vdpa: potential uninitialized return in vhost_vdpa_va_map() (Cindy Lu) [2055451]
- vdpa/mlx5: Avoid executing set_vq_ready() if device is reset (Cindy Lu) [2055451]
- vdpa/mlx5: Clear ready indication for control VQ (Cindy Lu) [2055451]
- vdpa: Support transferring virtual addressing during DMA mapping (Cindy Lu) [2055451]
- vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() (Cindy Lu) [2055451]
- vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() (Cindy Lu) [2055451]
- vhost-iotlb: Add an opaque pointer for vhost IOTLB (Cindy Lu) [2055451]
- vhost-vdpa: Handle the failure of vdpa_reset() (Cindy Lu) [2055451]
- vdpa: Add reset callback in vdpa_config_ops (Cindy Lu) [2055451]
- vdpa: Fix some coding style issues (Cindy Lu) [2055451]
- vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro (Cindy Lu) [2055451]
- vdpa/mlx5: Add multiqueue support (Cindy Lu) [2055451]
- vdpa/mlx5: Add support for control VQ and MAC setting (Cindy Lu) [2055451]
- vdpa/mlx5: Ensure valid indices are provided (Cindy Lu) [2055451]
- vdpa/mlx5: Decouple virtqueue callback from struct mlx5_vdpa_virtqueue (Cindy Lu) [2055451]
- vdpa/mlx5: function prototype modifications in preparation to control VQ (Cindy Lu) [2055451]
- vdpa/mlx5: Remove redundant header file inclusion (Cindy Lu) [2055451]
- vDPA/ifcvf: enable multiqueue and control vq (Cindy Lu) [2055451]
- vDPA/ifcvf: detect and use the onboard number of queues directly (Cindy Lu) [2055451]
- vDPA/ifcvf: implement management netlink framework for ifcvf (Cindy Lu) [2055451]
- vDPA/ifcvf: introduce get_dev_type() which returns virtio dev id (Cindy Lu) [2055451]
- x86/hyperv: Output host build info as normal Windows version number (Vitaly Kuznetsov) [2060708]
- lib/irq_poll: Declare IRQ_POLL softirq vector as ksoftirqd-parking safe (Desnes A. Nunes do Rosario) [2059555]
- tick/rcu: Stop allowing RCU_SOFTIRQ in idle (Desnes A. Nunes do Rosario) [2059555]
- tick/rcu: Remove obsolete rcu_needs_cpu() parameters (Desnes A. Nunes do Rosario) [2059555]
- tick: Detect and fix jiffies update stall (Desnes A. Nunes do Rosario) [2059555]
- rcu: Move rcu_needs_cpu() to tree.c (Desnes A. Nunes do Rosario) [2059555]
- rcu: Remove the RCU_FAST_NO_HZ Kconfig option (Desnes A. Nunes do Rosario) [2059555]
- torture: Remove RCU_FAST_NO_HZ from rcu scenarios (Desnes A. Nunes do Rosario) [2059555]
- torture: Remove RCU_FAST_NO_HZ from rcuscale and refscale scenarios (Desnes A. Nunes do Rosario) [2059555]
- copy_process(): Move fd_install() out of sighand->siglock critical section (Waiman Long) [2051855]
- redhat/configs: enable CONFIG_INTEL_VSEC for x86 (David Arcari) [2058806]
- platform/x86/intel: Move intel_pmt from MFD to Auxiliary Bus (David Arcari) [2058806]
- platform/x86: intel_pmt_telemetry: Ignore zero sized entries (David Arcari) [2058806]
- platform/x86/intel: Move Intel PMT drivers to new subfolder (David Arcari) [2058806]
- driver core: auxiliary bus: Add driver data helpers (David Arcari) [2058806]
- PCI: Add #defines for accessing PCIe DVSEC fields (David Arcari) [2058806]
- tools headers UAPI: Sync powerpc syscall table file changed by new futex_waitv syscall (Joel Savitz) [2038794]
- tools headers UAPI: Sync s390 syscall table file changed by new futex_waitv syscall (Joel Savitz) [2038794]
- futex: Wireup futex_waitv syscall (Joel Savitz) [2038794]
- tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall (Joel Savitz) [2038794]
- parisc: Wire up futex_waitv (Joel Savitz) [2038794]
- s390: wire up sys_futex_waitv system call (Joel Savitz) [2038794]
- MIPS: syscalls: Wire up futex_waitv syscall (Joel Savitz) [2038794]
- tools headers UAPI: Sync files changed by new futex_waitv syscall (Joel Savitz) [2038794]
- futex2: Documentation: Document sys_futex_waitv() uAPI (Joel Savitz) [2038794]
- selftests: futex: Test sys_futex_waitv() wouldblock (Joel Savitz) [2038794]
- selftests: futex: Test sys_futex_waitv() timeout (Joel Savitz) [2038794]
- selftests: futex: Add sys_futex_waitv() test (Joel Savitz) [2038794]
- futex,arm: Wire up sys_futex_waitv() (Joel Savitz) [2038794]
- futex,x86: Wire up sys_futex_waitv() (Joel Savitz) [2038794]
- futex: Implement sys_futex_waitv() (Joel Savitz) [2038794]
- futex: Simplify double_lock_hb() (Joel Savitz) [2038794]
- futex: Split out wait/wake (Joel Savitz) [2038794]
- futex: Split out requeue (Joel Savitz) [2038794]
- futex: Rename mark_wake_futex() (Joel Savitz) [2038794]
- futex: Rename: match_futex() (Joel Savitz) [2038794]
- futex: Rename: hb_waiter_{inc,dec,pending}() (Joel Savitz) [2038794]
- futex: Split out PI futex (Joel Savitz) [2038794]
- futex: Rename: {get,cmpxchg}_futex_value_locked() (Joel Savitz) [2038794]
- futex: Rename hash_futex() (Joel Savitz) [2038794]
- futex: Rename __unqueue_futex() (Joel Savitz) [2038794]
- futex: Rename: queue_{,un}lock() (Joel Savitz) [2038794]
- futex: Rename futex_wait_queue_me() (Joel Savitz) [2038794]
- futex: Rename {,__}{,un}queue_me() (Joel Savitz) [2038794]
- futex: Split out syscalls (Joel Savitz) [2038794]
- futex: Move to kernel/futex/ (Joel Savitz) [2038794]
- cifs: fix double free race when mount fails in cifs_get_root() (Ronnie Sahlberg) [1979175]
* Mon Mar 28 2022 Fernando Pacheco <fpacheco@redhat.com> [5.14.0-75.rt21.75.el9]
- [rt] build kernel-rt-5.14.0-75.rt21.75.el9 [2061574]

6
sources
View File

@ -1,4 +1,4 @@
SHA512 (kernel-abi-whitelists-5.13.0-1.tar.bz2) = ceba454e1f590c1e4ef4115a75463ae3ac2c2aa7ec85fa14a2669d666c421483a38225ee19d7d72b4ac7032375741408b23543e43588538c80161ec0cf57051c
SHA512 (linux-5.14.0-75.rt21.75.el9.tar.xz) = 61efbd3940434418857e6b09e6a26799a5aa050af4a9c6bea9dfc55b06ab30f8e173345be185106cb36d2f802818bd00e22af7496ee14187bd93c3a065236489
SHA512 (kernel-abi-stablelists-5.14.0-75.rt21.75.el9.tar.bz2) = dd270641f4a1e1666febe79753b33015fc559efbe8fa8ecda754115a5e38cbb4688a400e6e7467cefda772b8398b6b03fd287a184d7ef2f090f557da4d0aee30
SHA512 (kernel-kabi-dw-5.14.0-75.rt21.75.el9.tar.bz2) = f48c87da1305f27edb6978f09d3ddef1604f6f064094a9b8ab9c39a5f9451c9155419f680227af536db9172609e6c6f8ba7629f707088e64eeb01a43bbf4670e
SHA512 (linux-5.14.0-76.rt21.76.el9.tar.xz) = 7f7f95b825685b27260681e1518d9c51323591cd96b580cf6ca5afd68d7153178bee1d335eb41473418d9d9a5cbc9e4e56b4f830606451859438b92796f2614b
SHA512 (kernel-abi-stablelists-5.14.0-76.rt21.76.el9.tar.bz2) = 356d0e20f745037a39a904a8bbf1c33073816c3d99a1a8a40af31b258694f8ce5c55f207b5ee7f3630de4d876b2f9092dea794240785c51165fdaa5b3d69e27e
SHA512 (kernel-kabi-dw-5.14.0-76.rt21.76.el9.tar.bz2) = f48c87da1305f27edb6978f09d3ddef1604f6f064094a9b8ab9c39a5f9451c9155419f680227af536db9172609e6c6f8ba7629f707088e64eeb01a43bbf4670e