kernel-rt-4.18.0-509.rt7.298.el8

* Thu Aug 10 2023 Denys Vlasenko <dvlasenk@redhat.com> [4.18.0-509.rt7.298.el8]
- [rt] build kernel-rt-4.18.0-509.rt7.298.el8 [2180997]
- cifs: fix for following DFS links where sharename is the same as prepath (Ronnie Sahlberg) [2130474]
- crypto: rng - Fix lock imbalance in crypto_del_rng (Herbert Xu) [2229700]
- ibmvnic: Do not reset dql stats on NON_FATAL err (Mamatha Inamdar) [2227904]
- mptcp: Correct the sock::sk_lock.owned lockdep annotations (Felix Maurer) [2228890]
- gpio: name PCA953x gpio chips after device name (Steve Best) [2226775]
- scsi: storvsc: Handle SRB status value 0x30 (Cathy Avery) [2218133]
- netfilter: nft_set_pipapo: fix improper element removal (Phil Sutter) [2225276] {CVE-2023-4004}
- macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF (Xin Long) [2226791]
- tcp: Reduce chance of collisions in inet6_hashfn(). (Felix Maurer) [2176120] {CVE-2023-1206}
- ipv6: fix locking issues with loops over idev->addr_list (Jiri Benc) [2123305]
- relayfs: fix out-of-bounds access in relay_file_read (Bill O'Donnell) [2215511] {CVE-2023-3268}
- kernel/relay.c: fix read_pos error when multiple readers (Bill O'Donnell) [2215510]
- seq_buf: Make trace_seq_putmem_hex() support data longer than 8 (Ricardo Robaina) [2212207] {CVE-2023-28772}
- seq_buf: Fix overflow in seq_buf_putmem_hex() (Ricardo Robaina) [2212207] {CVE-2023-28772}
- tools/power/x86/intel-speed-select: Support more than 8 sockets. (Frank Ramsay) [2212508]
- platform/x86: ISST: Remove 8 socket limit (Frank Ramsay) [2212508]
- media: saa7134: fix use after free bug in saa7134_finidev due to race condition (Wander Lairson Costa) [2216140] {CVE-2023-35823}
- Bluetooth: btmtksdio: fix possible FW initialization failure (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: fix the reset takes too long (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: mask out interrupt status (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0 (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add two more Bluetooth parts for WCN6855 (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922) (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add support for Foxconn MT7922A (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: Fix kernel oops when sdio suspend. (David Marlin) [2142489 2144730 2145097]
- Enable MTK BT Support for RHEL (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921 (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: support bluetooth reset mechanism (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: fix btmtksdio_[drv|fw]_pmctrl() (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: refactor btmtksdio_runtime_[suspend|resume]() (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: fix bus hang with wrong privilege (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: fix firmware coredump retrieve (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: Enable SCO over I2S (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: Support wake on bluetooth (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: rename btsdio_mtk_reg_read (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: enable AOSP extension for MT7921 (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: enable msft opcode (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: fix resume failure (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: handle runtime pm only when sdio_func is available (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: drop the unnecessary variable created (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: add support of processing firmware coredump and log (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: add MT7921s Bluetooth support (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: transmit packet according to status TX_EMPTY (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: use register CRPLR to read packet length (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: update register CSDIOCSR operation (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: move interrupt service to work (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: explicitly set WHISR as write-1-clear (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: add .set_bdaddr support (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksido: rely on BT_MTK module (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mediatek: add BT_MTK module (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Support public address configuration for MediaTek Chip. (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Support Bluetooth Reset for Mediatek Chip(MT7921) (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add support for Foxconn Mediatek Chip (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: fix blacklist_table context (David Marlin) [2142489 2144730 2145097]
Resolves: rhbz#2180997, rhbz#2216140, rhbz#2215511, rhbz#2212207, rhbz#2176120, rhbz#2227516

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
This commit is contained in:
Denys Vlasenko 2023-08-10 10:34:35 +02:00
parent 78250c9ff3
commit 157ccc6739
11 changed files with 71 additions and 5 deletions

View File

@ -2734,6 +2734,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -2802,6 +2802,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -2427,6 +2427,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -2493,6 +2493,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -2553,6 +2553,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -2784,6 +2784,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -2620,6 +2620,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -2526,6 +2526,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -2592,6 +2592,7 @@ CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_3WIRE=y

View File

@ -12,7 +12,7 @@
# change below to w4T.xzdio): # change below to w4T.xzdio):
%define _binary_payload w3T.xzdio %define _binary_payload w3T.xzdio
%global distro_build 508 %global distro_build 509
# Sign the x86_64 kernel for secure boot authentication # Sign the x86_64 kernel for secure boot authentication
%ifarch x86_64 aarch64 s390x ppc64le %ifarch x86_64 aarch64 s390x ppc64le
@ -38,10 +38,10 @@
# define buildid .local # define buildid .local
%define rpmversion 4.18.0 %define rpmversion 4.18.0
%define pkgrelease 508.rt7.297.el8 %define pkgrelease 509.rt7.298.el8
# allow pkg_release to have configurable %%{?dist} tag # allow pkg_release to have configurable %%{?dist} tag
%define specrelease 508.rt7.297%{?dist} %define specrelease 509.rt7.298%{?dist}
%define pkg_release %{specrelease}%{?buildid} %define pkg_release %{specrelease}%{?buildid}
@ -147,7 +147,7 @@
# The preempt RT patch level # The preempt RT patch level
%global rttag .rt7 %global rttag .rt7
# realtimeN # realtimeN
%global rtbuild .297 %global rtbuild .298
%define with_doc 0 %define with_doc 0
%define with_headers 0 %define with_headers 0
%define with_cross_headers 0 %define with_cross_headers 0
@ -2698,6 +2698,63 @@ fi
# #
# #
%changelog %changelog
* Thu Aug 10 2023 Denys Vlasenko <dvlasenk@redhat.com> [4.18.0-509.rt7.298.el8]
- [rt] build kernel-rt-4.18.0-509.rt7.298.el8 [2180997]
- cifs: fix for following DFS links where sharename is the same as prepath (Ronnie Sahlberg) [2130474]
- crypto: rng - Fix lock imbalance in crypto_del_rng (Herbert Xu) [2229700]
- ibmvnic: Do not reset dql stats on NON_FATAL err (Mamatha Inamdar) [2227904]
- mptcp: Correct the sock::sk_lock.owned lockdep annotations (Felix Maurer) [2228890]
- gpio: name PCA953x gpio chips after device name (Steve Best) [2226775]
- scsi: storvsc: Handle SRB status value 0x30 (Cathy Avery) [2218133]
- netfilter: nft_set_pipapo: fix improper element removal (Phil Sutter) [2225276] {CVE-2023-4004}
- macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF (Xin Long) [2226791]
- tcp: Reduce chance of collisions in inet6_hashfn(). (Felix Maurer) [2176120] {CVE-2023-1206}
- ipv6: fix locking issues with loops over idev->addr_list (Jiri Benc) [2123305]
- relayfs: fix out-of-bounds access in relay_file_read (Bill O'Donnell) [2215511] {CVE-2023-3268}
- kernel/relay.c: fix read_pos error when multiple readers (Bill O'Donnell) [2215510]
- seq_buf: Make trace_seq_putmem_hex() support data longer than 8 (Ricardo Robaina) [2212207] {CVE-2023-28772}
- seq_buf: Fix overflow in seq_buf_putmem_hex() (Ricardo Robaina) [2212207] {CVE-2023-28772}
- tools/power/x86/intel-speed-select: Support more than 8 sockets. (Frank Ramsay) [2212508]
- platform/x86: ISST: Remove 8 socket limit (Frank Ramsay) [2212508]
- media: saa7134: fix use after free bug in saa7134_finidev due to race condition (Wander Lairson Costa) [2216140] {CVE-2023-35823}
- Bluetooth: btmtksdio: fix possible FW initialization failure (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: fix the reset takes too long (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: mask out interrupt status (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0 (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add two more Bluetooth parts for WCN6855 (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922) (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add support for Foxconn MT7922A (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: Fix kernel oops when sdio suspend. (David Marlin) [2142489 2144730 2145097]
- Enable MTK BT Support for RHEL (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921 (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: support bluetooth reset mechanism (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: fix btmtksdio_[drv|fw]_pmctrl() (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: refactor btmtksdio_runtime_[suspend|resume]() (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: fix bus hang with wrong privilege (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: fix firmware coredump retrieve (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: Enable SCO over I2S (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mt7921s: Support wake on bluetooth (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: rename btsdio_mtk_reg_read (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: enable AOSP extension for MT7921 (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: enable msft opcode (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: fix resume failure (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: handle runtime pm only when sdio_func is available (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: drop the unnecessary variable created (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: add support of processing firmware coredump and log (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: add MT7921s Bluetooth support (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: transmit packet according to status TX_EMPTY (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: use register CRPLR to read packet length (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: update register CSDIOCSR operation (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: move interrupt service to work (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: explicitly set WHISR as write-1-clear (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksdio: add .set_bdaddr support (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btmtksido: rely on BT_MTK module (David Marlin) [2142489 2144730 2145097]
- Bluetooth: mediatek: add BT_MTK module (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Support public address configuration for MediaTek Chip. (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Support Bluetooth Reset for Mediatek Chip(MT7921) (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: Add support for Foxconn Mediatek Chip (David Marlin) [2142489 2144730 2145097]
- Bluetooth: btusb: fix blacklist_table context (David Marlin) [2142489 2144730 2145097]
* Sun Aug 06 2023 Denys Vlasenko <dvlasenk@redhat.com> [4.18.0-508.rt7.297.el8] * Sun Aug 06 2023 Denys Vlasenko <dvlasenk@redhat.com> [4.18.0-508.rt7.297.el8]
- [rt] build kernel-rt-4.18.0-508.rt7.297.el8 [2180997] - [rt] build kernel-rt-4.18.0-508.rt7.297.el8 [2180997]
- HID: betop: check shape of output reports (Desnes Nunes) [2212166] {CVE-2023-1073} - HID: betop: check shape of output reports (Desnes Nunes) [2212166] {CVE-2023-1073}

View File

@ -1 +1 @@
SHA512 (linux-4.18.0-508.rt7.297.el8.tar.xz) = ce18042eb3983ef8b7e10409ad54b842735cb66920c5507c7d2dcf9cf4561f1e0c93f1872ed443315ec11774897bb2d4f8423d810910ae6b03506be8b8b60485 SHA512 (linux-4.18.0-509.rt7.298.el8.tar.xz) = a8679c6c13eb64002f1a592af67c020e0e6fff726820236ecff8c2d74266ef57491c78e4e4d92ff55b785d76577abd34320e7581ae1a7b2d2ed85203cb764ae0