kernel-rt-5.14.0-271.rt14.271.el9
* Thu Feb 16 2023 Luis Claudio R. Goncalves <lgoncalv@redhat.com> [5.14.0-271.rt14.271.el9] - [rt] build kernel-rt-5.14.0-271.rt14.271.el9 [2125474] - spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers (Mark Salter) [2071848 2122415] - spi: bcm2835aux: Convert to use GPIO descriptors (Mark Salter) [2071848 2122415] - spi: bcm2835aux: use 'unsigned int' instead of 'unsigned' (Mark Salter) [2071848 2122415] - redhat/configs: enable CONFIG_SPI_TEGRA210_QUAD (Mark Salter) [2071848 2122415] - spi: spi-imx: spi_imx_transfer_one(): check for DMA transfer first (Mark Salter) [2071848 2122415] - spi: tegra210-quad: Fix duplicate resource error (Mark Salter) [2071848 2122415] - spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock (Mark Salter) [2071848 2122415] - spi: amd: Fix SPI_SPD7 value (Mark Salter) [2071848 2122415] - spi: tegra210-quad: Don't initialise DMA if not supported (Mark Salter) [2071848 2122415] - spi: qup: support using GPIO as chip select line (Mark Salter) [2071848 2122415] - spi: tegra210-quad: Fix combined sequence (Mark Salter) [2071848 2122415] - spi: Ensure that sg_table won't be used after being freed (Mark Salter) [2071848 2122415] - spi: Split transfers larger than max size (Mark Salter) [2071848 2122415] - spi: Fix cache corruption due to DMA/PIO overlap (Mark Salter) [2071848 2122415] - spi: Save current RX and TX DMA devices (Mark Salter) [2071848 2122415] - spi: spi-fsl-qspi: Use devm_platform_ioremap_resource_byname() (Mark Salter) [2071848 2122415] - spi: spi-fsl-lpspi: Use devm_platform_get_and_ioremap_resource() (Mark Salter) [2071848 2122415] - spi: Group cs_change and cs_off flags together in struct spi_transfer (Mark Salter) [2071848 2122415] - spi: lpspi: Remove the unneeded result variable (Mark Salter) [2071848 2122415] - spi: Add capability to perform some transfer with chipselect off (Mark Salter) [2071848 2122415] - spi: nxp-fspi: Do not dereference fwnode in struct device (Mark Salter) [2071848 2122415] - spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime() (Mark Salter) [2071848 2122415] - spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume() (Mark Salter) [2071848 2122415] - spi: amd: Fix speed selection (Mark Salter) [2071848 2122415] - spi: amd: Configure device speed (Mark Salter) [2071848 2122415] - spi: pxa2xx: Remove the unneeded result variable (Mark Salter) [2071848 2122415] - spi: move from strlcpy with unused retval to strscpy (Mark Salter) [2071848 2122415] - spi: amd: Setup all xfers before opcode execution (Mark Salter) [2071848 2122415] - spi: lpspi: Simplify some error message (Mark Salter) [2071848 2122415] - spi: spi: Fix queue hang if previous transfer failed (Mark Salter) [2071848 2122415] - spi: mux: Fix mux interaction with fast path optimisations (Mark Salter) [2071848 2122415] - spi: spi.c: Add missing __percpu annotations in users of spi_statistics (Mark Salter) [2071848 2122415] - spi: Fix simplification of devm_spi_register_controller (Mark Salter) [2071848 2122415] - spi: remove duplicate parameters check in acpi_spi_add_resource() (Mark Salter) [2071848 2122415] - spi: propagate error code to the caller of acpi_spi_device_alloc() (Mark Salter) [2071848 2122415] - spi: amd: Add struct and enum kernel-doc comments (Mark Salter) [2071848 2122415] - spi: amd: Drop io_base_addr member from struct amd_spi (Mark Salter) [2071848 2122415] - spi: amd: Make use of dev_err_probe() (Mark Salter) [2071848 2122415] - spi: amd: Make use of devm_spi_alloc_master() (Mark Salter) [2071848 2122415] - spi: Use device_find_any_child() instead of custom approach (Mark Salter) [2071848 2122415] - spi: spi.c: Remove redundant else block (Mark Salter) [2071848 2122415] - spi: spi.c: Fix comment style (Mark Salter) [2071848 2122415] - spi: spi.c: White-space fix in __spi_pump_messages() (Mark Salter) [2071848 2122415] - spi: pxa2xx: Add support for Intel Meteor Lake-P (Mark Salter) [2071848 2122415] - spi: opportunistically skip ctlr->cur_msg_completion (Mark Salter) [2071848 2122415] - spi: Ensure the io_mutex is held until spi_finalize_current_message() (Mark Salter) [2071848 2122415] - spi: Set ctlr->cur_msg also in the sync transfer case (Mark Salter) [2071848 2122415] - spi: Remove unneeded READ_ONCE for ctlr->busy flag (Mark Salter) [2071848 2122415] - spi: Remove the now unused ctlr->idling flag (Mark Salter) [2071848 2122415] - spi: Remove check for idling in __spi_pump_messages() (Mark Salter) [2071848 2122415] - spi: Remove check for controller idling in spi sync path (Mark Salter) [2071848 2122415] - spi: __spi_pump_messages: Consolidate spin_unlocks to goto target (Mark Salter) [2071848 2122415] - spi: Lock controller idling transition inside the io_mutex (Mark Salter) [2071848 2122415] - spi: Don't use the message queue if possible in spi_sync (Mark Salter) [2071848 2122415] - spi: Move ctlr->cur_msg_prepared to struct spi_message (Mark Salter) [2071848 2122415] - spi: core: Fix error code in spi_register_controller() (Mark Salter) [2071848 2122415] - spi: tegra210-quad: Multi-cs support (Mark Salter) [2071848 2122415] - spi: Fix per-cpu stats access on 32 bit systems (Mark Salter) [2071848 2122415] - spi: <linux/spi/spi.h>: Add missing documentation for struct members (Mark Salter) [2071848 2122415] - spi: spi.c: Convert statistics to per-cpu u64_stats_t (Mark Salter) [2071848 2122415] - spi: fix typo in comment (Mark Salter) [2071848 2122415] - spi: amd: Limit max transfer and message size (Mark Salter) [2071848 2122415] - spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged (Mark Salter) [2071848 2122415] - spi: spi-imx: add PIO polling support (Mark Salter) [2071848 2122415] - spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller (Mark Salter) [2071848 2122415] - spi: spi-imx: spi_imx_buf_rx_swap_u32(): replace open coded swahw32s() (Mark Salter) [2071848 2122415] - spi: spi-imx: spi_imx_buf_rx_swap_u32(): fix sparse warning: use swab32s() instead of cpu_to_be32() (Mark Salter) [2071848 2122415] - spi: spi-imx: mx51_ecspi_intctrl(): prefer 'unsigned int' to bare use of 'unsigned' (Mark Salter) [2071848 2122415] - spi: spi-imx: avoid unnecessary line continuations (Mark Salter) [2071848 2122415] - spi: spi-imx: fix sparse warning: add identifier name to function definition (Mark Salter) [2071848 2122415] - spi: spi-fsl-qspi: check return value after calling platform_get_resource_byname() (Mark Salter) [2071848 2122415] - spi: spi-imx: complete conversion from master -> controller (Mark Salter) [2071848 2122415] - spi: core: Display return code when failing to transfer message (Mark Salter) [2071848 2122415] - spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller (Mark Salter) [2071848 2122415] - spi: Use helper for safer setting of driver_override (Mark Salter) [2071848 2122415] - spi: spi-imx: using pm_runtime_resume_and_get instead of pm_runtime_get_sync (Mark Salter) [2071848 2122415] - spi: core: Initialize returned status in spi_setup (Mark Salter) [2071848 2122415] - spi: using pm_runtime_resume_and_get instead of pm_runtime_get_sync (Mark Salter) [2071848 2122415] - spi: spi-imx: add support for SPI_RX_CPHA_FLIP (Mark Salter) [2071848 2122415] - spi: add SPI_RX_CPHA_FLIP mode bit (Mark Salter) [2071848 2122415] - spi: core: Only check bits_per_word validity when explicitly provided (Mark Salter) [2071848 2122415] - spi: core: add dma_map_dev for __spi_unmap_msg() (Mark Salter) [2071848 2122415] - spi: Fix erroneous sgs value with min_t() (Mark Salter) [2071848 2122415] - spi: tegra210-quad: combined sequence mode (Mark Salter) [2071848 2122415] - spi: tegra210-quad: add acpi support (Mark Salter) [2071848 2122415] - spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ (Mark Salter) [2071848 2122415] - spi: use specific last_cs instead of last_cs_enable (Mark Salter) [2071848 2122415] - spi: tegra210-quad: add new chips to compatible (Mark Salter) [2071848 2122415] - spi: tegra210-quad: use device_reset method (Mark Salter) [2071848 2122415] - spi: use sysfs_emit() for printing statistics and add trailing newline (Mark Salter) [2071848 2122415] - spi: amd: Fix building without ACPI enabled (Mark Salter) [2071848 2122415] - spi: Retire legacy GPIO handling (Mark Salter) [2071848 2122415] - spi: amd: Add support for version AMDI0062 (Mark Salter) [2071848 2122415] - spi: amd: Remove needless rom_addr variable (Mark Salter) [2071848 2122415] - spi: amd: Use iopoll for busy waiting (Mark Salter) [2071848 2122415] - spi: spi-mem: Introduce a capability structure (Mark Salter) [2071848 2122415] - spi: tegra210-quad: Fix missin IRQ check in tegra_qspi_probe (Mark Salter) [2071848 2122415] - spi: Make spi_alloc_device and spi_add_device public again (Mark Salter) [2071848 2122415] - spi: pxa2xx_spi: Convert to use GPIO descriptors (Mark Salter) [2071848 2122415] - spi: Fix invalid sgs value (Mark Salter) [2071848 2122415] - spi: don't include ptp_clock_kernel.h in spi.h (Mark Salter) [2071848 2122415] - spi: pxa2xx: Propagate firmware node (Mark Salter) [2071848 2122415] - spi: Fix incorrect cs_setup delay handling (Mark Salter) [2071848 2122415] - spi: pxa2xx: Get rid of unused enable_loopback member (Mark Salter) [2071848 2122415] - spi: pxa2xx: Get rid of unused ->cs_control() (Mark Salter) [2071848 2122415] - spi: tegra210-quad: use devm call for cdata memory (Mark Salter) [2071848 2122415] - spi: Fix condition in the __spi_register_driver() (Mark Salter) [2071848 2122415] - spi: pxa2xx: Remove redundant ->read() and ->write() in struct chip_data (Mark Salter) [2071848 2122415] - spi: Fix multi-line comment style (Mark Salter) [2071848 2122415] - spi: Replace memset() with __GFP_ZERO (Mark Salter) [2071848 2122415] - spi: deduplicate spi_match_id() in __spi_register_driver() (Mark Salter) [2071848 2122415] - spi: xlp: Remove Netlogic XLP variants (Mark Salter) [2071848 2122415] - spi: lpspi: release requested DMA channels (Mark Salter) [2071848 2122415] - spi: fix use-after-free of the add_lock mutex (Mark Salter) [2071848 2122415] - spi: lpspi: Silence error message upon deferred probe (Mark Salter) [2071848 2122415] - rtc: ds1390: Add SPI ID table (Mark Salter) [2071848 2122415] - rtc: mcp795: Add SPI ID table (Mark Salter) [2071848 2122415] - spi: tegra210-quad: Put device into suspend on driver removal (Mark Salter) [2071848 2122415] - spi: Check we have a spi_device_id for each DT compatible (Mark Salter) [2071848 2122415] - spi: Make several public functions private to spi.c (Mark Salter) [2071848 2122415] - spi: Reorder functions to simplify the next commit (Mark Salter) [2071848 2122415] - spi: Remove unused function spi_busnum_to_master() (Mark Salter) [2071848 2122415] - spi: Move comment about chipselect check to the right place (Mark Salter) [2071848 2122415] - spi: amd: Don't wait for a write-only transfer to finish (Mark Salter) [2071848 2122415] - spi: amd: Remove unneeded variable (Mark Salter) [2071848 2122415] - spi: amd: Refactor amd_spi_busy_wait (Mark Salter) [2071848 2122415] - spi: amd: Refactor code to use less spi_master_get_devdata (Mark Salter) [2071848 2122415] - spi: spl022: fix Microwire full duplex mode (Mark Salter) [2071848 2122415] - spi-mux: Fix false-positive lockdep splats (Mark Salter) [2071848 2122415] - spi: Fix deadlock when adding SPI controllers on SPI buses (Mark Salter) [2071848 2122415] - spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround (Mark Salter) [2071848 2122415] - nfc: st-nci: Add SPI ID matching DT compatible (Mark Salter) [2071848 2122415] - spi: Revert modalias changes (Mark Salter) [2071848 2122415] - spi: <linux/spi/spi.h>: add missing struct kernel-doc entry (Mark Salter) [2071848 2122415] - spi: move cs spi_delay to spi_device (Mark Salter) [2071848 2122415] - spi: imx: Implement support for CS_WORD (Mark Salter) [2071848 2122415] - spi: pxa2xx: Adapt reset_sccr1() to the case when no message available (Mark Salter) [2071848 2122415] - spi: imx: remove ERR009165 workaround on i.mx6ul (Mark Salter) [2071848 2122415] - spi: imx: fix ERR009165 (Mark Salter) [2071848 2122415] - spi: imx: Simplify logic in spi_imx_push() (Mark Salter) [2071848 2122415] - spi: pxa2xx: Reuse int_stop_and_reset() in couple of places (Mark Salter) [2071848 2122415] - spi: pxa2xx: Reset DMA bits in CR1 in reset_sccr1() (Mark Salter) [2071848 2122415] - spi: pxa2xx: Convert reset_sccr1() to use pxa2xx_spi_update() (Mark Salter) [2071848 2122415] - i2c: qcom-geni: add support for I2C Master Hub variant (Andrew Halaney) [2164495] - i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant (Andrew Halaney) [2164495] - i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer (Andrew Halaney) [2164495] - clk: qcom: rpmh: add support for SM6350 rpmh IPA clock (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8974: move clock parent tables down (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8974: move clock parent tables down (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register (Adrien Thierry) [2158909] - clk: qcom: rpmh: remove usage of platform name (Adrien Thierry) [2158909] - clk: qcom: rpmh: rename VRM clock data (Adrien Thierry) [2158909] - clk: qcom: rpmh: rename ARC clock data (Adrien Thierry) [2158909] - clk: qcom: rpmh: support separate symbol name for the RPMH clocks (Adrien Thierry) [2158909] - clk: qcom: rpmh: remove platform names from BCM clocks (Adrien Thierry) [2158909] - clk: qcom: rpmh: drop all _ao names (Adrien Thierry) [2158909] - clk: qcom: rpmh: reuse common duplicate clocks (Adrien Thierry) [2158909] - clk: qcom: rpmh: group clock definitions together (Adrien Thierry) [2158909] - clk: qcom: rpm: drop the platform from clock definitions (Adrien Thierry) [2158909] - clk: qcom: rpm: drop the _clk suffix completely (Adrien Thierry) [2158909] - clk: qcom: rpm: drop separate active-only names (Adrien Thierry) [2158909] - clk: qcom: rpm: remove unused active-only clock names (Adrien Thierry) [2158909] - clk: qcom: Add GCC driver for SM8550 (Adrien Thierry) [2158909] - clk: qcom: Add LUCID_OLE PLL type for SM8550 (Adrien Thierry) [2158909] - clk: qcom: gdsc: Increase status poll timeout (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Add rates to the GP clocks (Adrien Thierry) [2158909] - clk: qcom: hfpll: use devm_platform_get_and_ioremap_resource() (Adrien Thierry) [2158909] - clk: qcom: ipq8074: populate fw_name for all parents (Adrien Thierry) [2158909] - clk: qcom: krait-cc: convert to parent_data API (Adrien Thierry) [2158909] - clk: qcom: krait-cc: convert to devm_clk_hw_register (Adrien Thierry) [2158909] - clk: qcom: krait-cc: handle secondary mux sourcing out of acpu_aux (Adrien Thierry) [2158909] - clk: qcom: krait-cc: also enable secondary mux and div clk (Adrien Thierry) [2158909] - clk: qcom: krait-cc: fix wrong parent order for secondary mux (Adrien Thierry) [2158909] - clk: qcom: krait-cc: use devm variant for clk notifier register (Adrien Thierry) [2158909] - clk: qcom: clk-krait: fix wrong div2 functions (Adrien Thierry) [2158909] - clk: qcom: kpss-xcc: register it as clk provider (Adrien Thierry) [2158909] - clk: qcom: ipq8074: add missing networking resets (Adrien Thierry) [2158909] - clk: qcom: reset: support resetting multiple bits (Adrien Thierry) [2158909] - clk: qcom: lpass-sc7180: Avoid an extra "struct dev_pm_ops" (Adrien Thierry) [2158909] - clk: qcom: lpass-sc7180: Fix pm_runtime usage (Adrien Thierry) [2158909] - clk: qcom: lpass-sc7280: Fix pm_runtime usage (Adrien Thierry) [2158909] - clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks (Adrien Thierry) [2158909] - clk: qcom: Add display clock controller driver for SM6375 (Adrien Thierry) [2158909] - clk: qcom: Add SC8280XP display clock controller (Adrien Thierry) [2158909] - clk: qcom: ipq8074: convert to parent data (Adrien Thierry) [2158909] - clk: qcom: Add support for QDU1000 and QRU1000 RPMh clocks (Adrien Thierry) [2158909] - clk: qcom: dispcc-sm8250: Disable link_div_clk_src for sm8150 (Adrien Thierry) [2158909] - clk: qcom: dispcc-sm8250: Add missing EDP clocks for sm8350 (Adrien Thierry) [2158909] - clk: qcom: dispcc-sm8250: Add RETAIN_FF_ENABLE flag for mdss_gdsc (Adrien Thierry) [2158909] - clk: qcom: dispcc-sm8250: Disable EDP_GTC for sm8350 (Adrien Thierry) [2158909] - clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs (Adrien Thierry) [2158909] - clk: qcom: dispcc-sm6350: Add CLK_OPS_PARENT_ENABLE to pixel&byte src (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6125: Remove gpll7 from sdcc2_apps (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: use parent_data for the last remaining entry (Adrien Thierry) [2158909] - clk: qcom: gdsc: Remove direct runtime PM calls (Adrien Thierry) [2158909] - clk: qcom: Update the force mem core bit for GPU clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6375: Ensure unsigned long type (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6375: Remove unused variables (Adrien Thierry) [2158909] - clk: qcom: kpss-xcc: convert to parent data API (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: use parent_hws where possible (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs (Adrien Thierry) [2158909] - clk: qcom: gcc-sc8280xp: use retention for USB power domains (Adrien Thierry) [2158909] - clk: qcom: gdsc: add missing error handling (Adrien Thierry) [2158909] - clk: qcom: Add global clock controller driver for SM6375 (Adrien Thierry) [2158909] - clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit (Adrien Thierry) [2158909] - clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs (Adrien Thierry) [2158909] - clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc (Adrien Thierry) [2158909] - clk: qcom: gdsc: Fix the handling of PWRSTS_RET support (Adrien Thierry) [2158909] - clk: qcom: Add SC8280XP GPU clock controller (Adrien Thierry) [2158909] - clk: qcom: smd: Add SM6375 clocks (Adrien Thierry) [2158909] - clk: qcom: rpmhcc: add sdm670 clocks (Adrien Thierry) [2158909] - clk: qcom: Merge alt alpha plls for qcm2260, sm6115 (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6115: Move alpha pll bramo overrides (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6115: Override default Alpha PLL regs (Adrien Thierry) [2158909] - clk: qcom: Add support for Display Clock Controller on SM8450 (Adrien Thierry) [2158909] - clk: qcom: alpha-pll: add support for power off mode for lucid evo PLL (Adrien Thierry) [2158909] - clk: qcom: Add display clock controller driver for SM6115 (Adrien Thierry) [2158909] - clk: qcom: gcc-sc7280: Update the .pwrsts for PCIe GDSC (Adrien Thierry) [2158909] - clk: qcom: lpass: Fix lpass audiocc probe (Adrien Thierry) [2158909] - clk: qcom: apss-ipq-pll: add support for IPQ8074 (Adrien Thierry) [2158909] - clk: qcom: apss-ipq-pll: update IPQ6018 Alpha PLL config (Adrien Thierry) [2158909] - clk: qcom: apss-ipq-pll: use OF match data for Alpha PLL config (Adrien Thierry) [2158909] - clk: qcom: apss-ipq6018: mark apcs_alias0_core_clk as critical (Adrien Thierry) [2158909] - clk: qcom: apss-ipq6018: fix apcs_alias0_clk_src (Adrien Thierry) [2158909] - clk: qcom: clk-rcg2: add rcg2 mux ops (Adrien Thierry) [2158909] - clk: qcom: lcc-ipq806x: use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909] - clk: qcom: lcc-ipq806x: convert to parent data (Adrien Thierry) [2158909] - clk: qcom: lcc-ipq806x: add reset definition (Adrien Thierry) [2158909] - clk: qcom: cpu-8996: use constant mask for pmux (Adrien Thierry) [2158909] - clk: qcom: cpu-8996: don't store parents in clk_cpu_8996_pmux (Adrien Thierry) [2158909] - clk: qcom: cpu-8996: move ACD logic to clk_cpu_8996_pmux_determine_rate (Adrien Thierry) [2158909] - clk: qcom: cpu-8996: declare ACD clocks (Adrien Thierry) [2158909] - clk: qcom: cpu-8996: switch to devm_clk_notifier_register (Adrien Thierry) [2158909] - clk: qcom: msm8996-cpu: Use parent_data/_hws for all clocks (Adrien Thierry) [2158909] - clk: qcom: msm8996-cpu: Convert secondary muxes to clk_regmap_mux (Adrien Thierry) [2158909] - clk: qcom: msm8996-cpu: Unify cluster order (Adrien Thierry) [2158909] - clk: qcom: msm8996-cpu: Statically define PLL dividers (Adrien Thierry) [2158909] - clk: qcom: msm8996-cpu: Rename DIV_2_INDEX to SMUX_INDEX (Adrien Thierry) [2158909] - clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d (Adrien Thierry) [2158909] - clk: Introduce the clk_hw_get_rate_range function (Adrien Thierry) [2158909] - clk: qcom: smd-rpm: Add clocks for MSM8909 (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8909: Increase delay for USB PHY reset (Adrien Thierry) [2158909] - clk: qcom: reset: Allow specifying custom reset delay (Adrien Thierry) [2158909] - clk: qcom: Add driver for MSM8909 GCC (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8960: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8960: move clock parent tables down (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8960: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: lcc-msm8960: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: lcc-msm8960: use macros to implement mi2s clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8960: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8960: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: clk-rpmh: Remove redundant if statement (Adrien Thierry) [2158909] - clk: qcom: gcc-sdm845: add sdm670 global clock data (Adrien Thierry) [2158909] - clk: qcom: gcc-sdm845: use device tree match data (Adrien Thierry) [2158909] - clk: qcom: a53-pll: convert to use parent_data rather than parent_names (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8660: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8660: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: sm6115: Select QCOM_GDSC (Adrien Thierry) [2158909] - clk: qcom: lpass: Add support for resets & external mclk for SC7280 (Adrien Thierry) [2158909] - clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aon (Adrien Thierry) [2158909] - clk: qcom: gcc-sdm660: Use floor ops for SDCC1 clock (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8916: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8916: move gcc_mss_q6_bimc_axi_clk down (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8916: move GPLL definitions up (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8916: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: gcc-sc8280xp: keep USB power-domains always-on (Adrien Thierry) [2158909] - clk: gcc-sc8280xp: keep PCIe power-domains always-on (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 (Adrien Thierry) [2158909] - clk: qcom: clk-rpm: convert to parent_data API (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk (Adrien Thierry) [2158909] - clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled (Adrien Thierry) [2158909] - clk: qcom: Drop mmcx gdsc supply for dispcc and videocc (Adrien Thierry) [2158909] - clk: qcom: fix build error initializer element is not constant (Adrien Thierry) [2158909] - clk: qcom: add support for SM8350 DISPCC (Adrien Thierry) [2158909] - clk: qcom: add support for SM8350 GPUCC (Adrien Thierry) [2158909] - clk: qcom: add camera clock controller driver for SM8450 SoC (Adrien Thierry) [2158909] - clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfaces (Adrien Thierry) [2158909] - clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces (Adrien Thierry) [2158909] - clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed code (Adrien Thierry) [2158909] - clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure description (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8960: create tsens device if there are no child nodes (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8916: Add rates to the GP clocks (Adrien Thierry) [2158909] - clk: qcom: clk-rcg2: Make sure to not write d=0 to the NMD register (Adrien Thierry) [2158909] - clk: qcom: clk-rcg2: Fail Duty-Cycle configuration if MND divider is not enabled. (Adrien Thierry) [2158909] - clk: qcom: camcc-sm8250: Fix topology around titan_top power domain (Adrien Thierry) [2158909] - clk: qcom: camcc-sdm845: Fix topology around titan_top power domain (Adrien Thierry) [2158909] - clk: qcom: ipq8074: dont disable gcc_sleep_clk_src (Adrien Thierry) [2158909] - clk: qcom: ipq8074: add USB GDSCs (Adrien Thierry) [2158909] - clk: qcom: ipq8074: set BRANCH_HALT_DELAY flag for UBI clocks (Adrien Thierry) [2158909] - clk: qcom: ipq8074: add PPE crypto clock (Adrien Thierry) [2158909] - clk: qcom: ipq8074: fix NSS port frequency tables (Adrien Thierry) [2158909] - clk: qcom: ipq8074: SW workaround for UBI32 PLL lock (Adrien Thierry) [2158909] - clk: qcom: ipq8074: fix NSS core PLL-s (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Point MM peripherals to system_mm_noc clock (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Add missing system_mm_noc_bfdcd_clk_src (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8939: Fix bimc_ddr_clk_src rcgr base address (Adrien Thierry) [2158909] - clk: qcom: gcc-sc8280xp: use phy-mux clock for PCIe (Adrien Thierry) [2158909] - clk: qcom: clk-krait: add apq/ipq8064 errata workaround (Adrien Thierry) [2158909] - clk: qcom: clk-krait: unlock spin after mux completion (Adrien Thierry) [2158909] - clk: qcom: clk-hfpll: use poll_timeout macro (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6350: Drop extra semicolon (Adrien Thierry) [2158909] - clk: qcom: gcc-sc8280xp: use collapse-voting for PCIe GDSCs (Adrien Thierry) [2158909] - clk: qcom: gdsc: add support for collapse-vote registers (Adrien Thierry) [2158909] - clk: qcom: gdsc: add collapse-bit helper (Adrien Thierry) [2158909] - clk: qcom: camcc-sm8250: Fix halt on boot by reducing driver's init level (Adrien Thierry) [2158909] - clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks (Adrien Thierry) [2158909] - clk: qcom: regmap: add PHY clock source implementation (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8996: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8996: move clock parent tables down (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8996: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: rpmh: Add note about sleep/wake state for BCMs (Adrien Thierry) [2158909] - Revert "clk: qcom: regmap-mux: add pipe clk implementation" (Adrien Thierry) [2158909] - Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" (Adrien Thierry) [2158909] - Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" (Adrien Thierry) [2158909] - clk: qcom: rcg2: Cache CFG register updates for parked RCGs (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8976: Add modem reset (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8976: Set floor ops for SDCC (Adrien Thierry) [2158909] - clk: qcom: smd: Update MSM8976 RPM clocks. (Adrien Thierry) [2158909] - clk: qcom: clk-rcg2: fix gfx3d frequency calculation (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8998: add SSC-related clocks (Adrien Thierry) [2158909] - clk: qcom: lpass: Add support for LPASS clock controller for SC7280 (Adrien Thierry) [2158909] - clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks (Adrien Thierry) [2158909] - clk: qcom: regmap-mux: add pipe clk implementation (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Fix gpll4 width (Adrien Thierry) [2158909] - clk: qcom: sm6125-gcc: fix typos in comments (Adrien Thierry) [2158909] - clk: qcom: Add display clock controller driver for SM6125 (Adrien Thierry) [2158909] - clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig (Adrien Thierry) [2158909] - clk: qcom: gcc: Add emac GDSC support for SM8150 (Adrien Thierry) [2158909] - clk: qcom: gcc: sm8150: Fix some identation issues (Adrien Thierry) [2158909] - clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 (Adrien Thierry) [2158909] - clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 (Adrien Thierry) [2158909] - clk: qcom: clk-rcg2: Update the frac table for pixel clock (Adrien Thierry) [2158909] - clk: qcom: clk-rcg2: Update logic to calculate D value for RCG (Adrien Thierry) [2158909] - clk: qcom: smd: Add missing MSM8998 RPM clocks (Adrien Thierry) [2158909] - clk: qcom: smd: Add missing RPM clocks for msm8992/4 (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: add CryptoEngine resets (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: add CryptoEngine clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: add additional freq for sdc table (Adrien Thierry) [2158909] - clk: qcom: clk-rcg: add clk_rcg_floor_ops ops (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: add unusued flag for critical clock (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: add additional freq nss cores (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: convert parent_names to parent_data (Adrien Thierry) [2158909] - clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0 (Adrien Thierry) [2158909] - clk: qcom: Add SDX65 APCS clock controller support (Adrien Thierry) [2158909] - clk: qcom: Add A7 PLL support for SDX65 (Adrien Thierry) [2158909] - clk: qcom: Add GPU clock controller driver for SM6350 (Adrien Thierry) [2158909] - clk: qcom: Add display clock controller driver for SM6350 (Adrien Thierry) [2158909] - clk: qcom: Declare mux table as const u32[] (Adrien Thierry) [2158909] - clk: qcom: dispcc: Update the transition delay for MDSS GDSC (Adrien Thierry) [2158909] - clk: qcom: gdsc: Add support to update GDSC transition delay (Adrien Thierry) [2158909] - clk: qcom: ipq8074: Use floor ops for SDCC1 clock (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Remove NoC clocks (Adrien Thierry) [2158909] - clk: qcom: Add MSM8226 Multimedia Clock Controller support (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8996: start getting rid of xo clk (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8996: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8996: move clock parent tables down (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8996: drop unsupported clock sources (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8996: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: videocc-sc7180: use parent_hws instead of parent_data (Adrien Thierry) [2158909] - clk: qcom: camcc-sdm845: convert to parent_hws/_data (Adrien Thierry) [2158909] - clk: qcom: camcc-sdm845: move clock parent tables down (Adrien Thierry) [2158909] - clk: qcom: camcc-sdm845: get rid of the test clock (Adrien Thierry) [2158909] - clk: qcom: camcc-sdm845: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: camcc-sc7180: use parent_hws instead of parent_data (Adrien Thierry) [2158909] - clk: qcom: camcc-sc7180: get rid of the test clock (Adrien Thierry) [2158909] - clk: qcom: camcc-sc7180: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909] - clk: qcom: gpucc-sdm660: use parent_hws instead of parent_data (Adrien Thierry) [2158909] - clk: qcom: gpucc-sdm660: get rid of the test clock (Adrien Thierry) [2158909] - clk: qcom: gpucc-sdm660: fix two clocks with parent_names (Adrien Thierry) [2158909] - clk: qcom: Add display clock controller driver for QCM2290 (Adrien Thierry) [2158909] - clk: qcom: ipq8074: fix PCI-E clock oops (Adrien Thierry) [2158909] - clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabled (Adrien Thierry) [2158909] - clk: qcom: clk-alpha-pll: Increase PLL lock detect poll time (Adrien Thierry) [2158909] - clk: qcom: turingcc-qcs404: explicitly include clk-provider.h (Adrien Thierry) [2158909] - clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h (Adrien Thierry) [2158909] - clk: qcom: mmcc-apq8084: explicitly include clk-provider.h (Adrien Thierry) [2158909] - clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h (Adrien Thierry) [2158909] - clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6350: explicitly include clk-provider.h (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: explicitly include clk-provider.h (Adrien Thierry) [2158909] - clk: qcom: gcc-sm8350: explicitly include clk-provider.h (Adrien Thierry) [2158909] - clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver (Adrien Thierry) [2158909] - clk: qcom: Add clock driver for SM8450 (Adrien Thierry) [2158909] - clk: qcom: Add SDX65 GCC support (Adrien Thierry) [2158909] - clk: qcom: Add LUCID_EVO PLL type for SDX65 (Adrien Thierry) [2158909] - clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1 (Adrien Thierry) [2158909] - clk: qcom: rpmh: add support for SM8450 rpmh clocks (Adrien Thierry) [2158909] - clk: qcom: smd-rpm: Drop binary value handling for buffered clock (Adrien Thierry) [2158909] - clk: qcom: smd-rpm: Drop the use of struct rpm_cc (Adrien Thierry) [2158909] - clk: qcom: smd-rpm: Drop MFD qcom-rpm reference (Adrien Thierry) [2158909] - clk: qcom: Add support for SDX65 RPMh clocks (Adrien Thierry) [2158909] - clk: qcom: clk-alpha-pll: Don't reconfigure running Trion (Adrien Thierry) [2158909] - clk: qcom: regmap-mux: fix parent clock lookup (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk (Adrien Thierry) [2158909] - clk: qcom: gdsc: enable optional power domain support (Adrien Thierry) [2158909] - clk: qcom: videocc-sm8250: use runtime PM for the clock controller (Adrien Thierry) [2158909] - clk: qcom: dispcc-sm8250: use runtime PM for the clock controller (Adrien Thierry) [2158909] - clk: qcom: gcc-sc7280: Drop unused array (Adrien Thierry) [2158909] - clk: qcom: camcc: Add camera clock controller driver for SC7280 (Adrien Thierry) [2158909] - clk: qcom: Add lpass clock controller driver for SC7280 (Adrien Thierry) [2158909] - clk: qcom: Kconfig: Sort the symbol for SC_LPASS_CORECC_7180 (Adrien Thierry) [2158909] - clk: qcom: mmcc-sdm660: Add hw_ctrl flag to venus_core0_gdsc (Adrien Thierry) [2158909] - clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdsc (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Use ARRAY_SIZE() for num_parents (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Add proper msm8992 support (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Add modem reset (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Remove the inexistent GDSC_PCIE (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Add missing clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Add missing NoC clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Fix up SPI QUP clocks (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8994: Modernize the driver (Adrien Thierry) [2158909] - clk: qcom: smd-rpm: Add QCM2290 RPM clock support (Adrien Thierry) [2158909] - clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_ops (Adrien Thierry) [2158909] - clk: qcom: Add Global Clock Controller driver for QCM2290 (Adrien Thierry) [2158909] - clk: qcom: add select QCOM_GDSC for SM6350 (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc (Adrien Thierry) [2158909] - clk: qcom: gcc: Remove CPUSS clocks control for SC7280 (Adrien Thierry) [2158909] - clk: qcom: Remove redundant .owner (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8998: Remove unnecessary fallbacks to global clocks (Adrien Thierry) [2158909] - clk: qcom: gpucc-msm8998: Remove unnecessary fallbacks to global clocks (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8998: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909] - clk: qcom: gpucc-msm8998: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8998: Remove transient global "xo" clock (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8998: Use parent_data/hws for internal clock relations (Adrien Thierry) [2158909] - clk: qcom: gcc-msm8998: Move parent names and mapping below GPLLs (Adrien Thierry) [2158909] - clk: qcom: kpss-xcc: Make use of the helper function devm_platform_ioremap_resource() (Adrien Thierry) [2158909] - clk: qcom: common: Make use of the helper function devm_platform_ioremap_resource() (Adrien Thierry) [2158909] - clk: qcom: a53-pll: Make use of the helper function devm_platform_ioremap_resource() (Adrien Thierry) [2158909] - clk: qcom: gpucc-sdm660: Remove fallback to global clock names (Adrien Thierry) [2158909] - clk: qcom: mmcc-sdm660: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909] - clk: qcom: gpucc-sdm660: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909] - clk: qcom: gcc-sdm660: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909] - clk: qcom: gcc-sm6350: Remove unused variable (Adrien Thierry) [2158909] - clk: qcom: Add SM6350 GCC driver (Adrien Thierry) [2158909] - clk: qcom: rpmh: Add support for RPMH clocks on SM6350 (Adrien Thierry) [2158909] - clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250 (Adrien Thierry) [2158909] - clk: qcom: Add Global Clock controller (GCC) driver for SM6115 (Adrien Thierry) [2158909] - clk: qcom: mmcc-msm8994: Add MSM8992 support (Adrien Thierry) [2158909] - clk: qcom: Add msm8994 MMCC driver (Adrien Thierry) [2158909] - clk: qcom: Add Global Clock Controller driver for MSM8953 (Adrien Thierry) [2158909] - clk: qcom: gcc-sdm660: Replace usage of parent_names (Adrien Thierry) [2158909] - clk: qcom: gcc-sdm660: Move parent tables after PLLs (Adrien Thierry) [2158909] - clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create (Adrien Thierry) [2158909] - clk: qcom: a53-pll: Add MSM8939 a53pll support (Adrien Thierry) [2158909] - clk: qcom: a53pll/mux: Use unique clock name (Adrien Thierry) [2158909] - clk: qcom: apcs-msm8916: Flag a53mux instead of a53pll as critical (Adrien Thierry) [2158909] - clk: qcom: gpucc-sm8150: Add SC8180x support (Adrien Thierry) [2158909] - clk: qcom: smd-rpm: Add mdm9607 clocks (Adrien Thierry) [2158909] - clk: qcom: rpmcc: Add support for MSM8953 RPM clocks. (Adrien Thierry) [2158909] - clk: qcom: smd: Add support for SM6115 rpm clocks (Adrien Thierry) [2158909] - clk: qcom: smd: Add support for SM6125 rpm clocks (Adrien Thierry) [2158909] - clk: qcom: dispcc-sm8250: Add additional parent clocks for DP (Adrien Thierry) [2158909] - clk: qcom: Add video clock controller driver for SC7280 (Adrien Thierry) [2158909] - clk: qcom: Add graphics clock controller driver for SC7280 (Adrien Thierry) [2158909] - clk: qcom: Add display clock controller driver for SC7280 (Adrien Thierry) [2158909] - soc: qcom: geni-se: add support for I2C Master Hub wrapper variant (Brian Masney) [2158216] - soc: qcom: geni-se: add desc struct to specify clocks from device match data (Brian Masney) [2158216] - soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table (Brian Masney) [2158216] - soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table (Brian Masney) [2158216] - soc: qcom: Select REMAP_MMIO for ICC_BWMON driver (Brian Masney) [2158216] - soc: qcom: Select REMAP_MMIO for LLCC driver (Brian Masney) [2158216] - soc: qcom: rpmpd: Add SM4250 support (Brian Masney) [2158216] - soc: qcom: llcc: Add configuration data for SM8550 (Brian Masney) [2158216] - soc: qcom: llcc: Add v4.1 HW version support (Brian Masney) [2158216] - soc: qcom: socinfo: Add SM8550 ID (Brian Masney) [2158216] - soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response (Brian Masney) [2158216] - soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets (Brian Masney) [2158216] - soc: qcom: rpmhpd: Add SM8550 power domains (Brian Masney) [2158216] - soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table (Brian Masney) [2158216] - soc: qcom: rpmh-rsc: Write CONTROL_TCS with next timer wakeup (Brian Masney) [2158216] - soc: qcom: rpmh-rsc: Save base address of drv (Brian Masney) [2158216] - soc: qcom: rpmh-rsc: Attach RSC to cluster PM domain (Brian Masney) [2158216] - soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index (Brian Masney) [2158216] - soc: qcom: socinfo: Add QDU1000/QRU1000 SoC IDs to the soc_id table (Brian Masney) [2158216] - soc: qcom: rpmhpd: Add QDU1000/QRU1000 power domains (Brian Masney) [2158216] - soc: qcom: spm: Implement support for SAWv2.3, MSM8976 L2 PM (Brian Masney) [2158216] - soc: qcom: llcc: make irq truly optional (Brian Masney) [2158216] - soc: qcom: spm: Add MSM8939 SPM register data (Brian Masney) [2158216] - soc: qcom: stats: Mark device as having no PM support (Brian Masney) [2158216] - soc: qcom: cmd-db: Mark device as having no PM support (Brian Masney) [2158216] - soc: qcom: pdr: Make QMI message rules const (Brian Masney) [2158216] - soc: qcom: rpmhpd: Use highest corner until sync_state (Brian Masney) [2158216] - soc: qcom: smd-rpm: Add SM6375 compatible (Brian Masney) [2158216] - soc: qcom: smd-rpm: Replace zero-length array with DECLARE_FLEX_ARRAY() helper (Brian Masney) [2158216] - soc: qcom: rpmhpd: add sdm670 power domains (Brian Masney) [2158216] - soc: qcom: socinfo: create soc_id table from bindings (Brian Masney) [2158216] - soc: qcom: move from strlcpy with unused retval to strscpy (Brian Masney) [2158216] - soc: qcom: rpmpd: Add SM6375 support (Brian Masney) [2158216] - soc: qcom: icc-bwmon: force clear counter/irq registers (Brian Masney) [2158216] - soc: qcom: icc-bwmon: add support for sc7280 LLCC BWMON (Brian Masney) [2158216] - soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver (Brian Masney) [2158216] - soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version (Brian Masney) [2158216] - soc: qcom: qmi: use const for struct qmi_elem_info (Brian Masney) [2158216] - soc: qcom: icc-bwmon: remove redundant ret variable (Brian Masney) [2158216] - soc: qcom: stats: Add SDM845 stats config and compatible (Brian Masney) [2158216] - soc: qcom: socinfo: Add PM6125 ID (Brian Masney) [2158216] - soc: qcom: socinfo: Add an ID for SM6375 (Brian Masney) [2158216] - soc: qcom: smem_state: Add refcounting for the 'state->of_node' (Brian Masney) [2158216] - soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() (Brian Masney) [2158216] - soc: qcom: icc-bwmon: add support for SDM845 LLCC BWMON (Brian Masney) [2158216] - soc: qcom: icc-bwmon: add per-variant quirks (Brian Masney) [2158216] - soc: qcom: icc-bwmon: use regmap and prepare for BWMON v5 (Brian Masney) [2158216] - soc: qcom: icc-bwmon: store count unit per variant (Brian Masney) [2158216] - soc: qcom: icc-bwmon: clear all registers on init (Brian Masney) [2158216] - soc: qcom: icc-bwmon: store reference to variant data in container (Brian Masney) [2158216] - soc: qcom: icc-bwmon: drop unused registers (Brian Masney) [2158216] - soc: qcom: icc-bwmon: re-use IRQ enable/clear define (Brian Masney) [2158216] - PM: domains: Store the next hrtimer wakeup in genpd (Brian Masney) [2158216] - soc: dt-bindings: qcom: add gpr bindings (Brian Masney) [2158216] - dt-bindings: power: rpmpd: Add SM4250 support (Brian Masney) [2158216] - dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding (Brian Masney) [2158216] - dt-bindings: power: rpmpd: Add QDU1000/QRU1000 to rpmpd binding (Brian Masney) [2158216] - dt-bindings: power: rpmpd: add sdm670 power domains (Brian Masney) [2158216] - dt-bindings: power: rpmpd: Add SM6375 power domains (Brian Masney) [2158216] - dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains (Brian Masney) [2158216] - dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants (Brian Masney) [2158216] - dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155 (Brian Masney) [2158216] - dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976 (Brian Masney) [2158216] - dt-bindings: arm: qcom,ids: Add SoC IDs for QDU1000/QRU1000 (Brian Masney) [2158216] - dt-bindings: arm: qcom: document qcom,msm-id and qcom,board-id (Brian Masney) [2158216] - regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() (Adrien Thierry) [2157968] - regulator: qcom-rpmh: Add support for PM8550 regulators (Adrien Thierry) [2157968] - regulator: qcom-rpmh: Fix PMR735a S3 regulator spec (Adrien Thierry) [2157968] - regulator: qcom_smd: Fix PMR735a S3 regulator spec (Adrien Thierry) [2157968] - regulator: qcom_smd: Add PMR735a regulators (Adrien Thierry) [2157968] - regulator: qcom-rpmh: add pm660 and pm660l pmics (Adrien Thierry) [2157968] - regulator: qcom_rpm: Fix circular deferral regression (Adrien Thierry) [2157968] - regulator: core: Don't err if allow-set-load but no allowed-modes (Adrien Thierry) [2157968] - regulator: core: Require regulator drivers to check uV for get_optimum_mode() (Adrien Thierry) [2157968] - regulator: qcom_smd: Add PM6125 RPM regulators (Adrien Thierry) [2157968] - regulator: qcom_smd: Sort pmics alphabetically (part 3) (Adrien Thierry) [2157968] - regulator: qcom_smd: Sort pmics alphabetically (part 2) (Adrien Thierry) [2157968] - regulator: qcom_smd: Sort pmics alphabetically (part 1) (Adrien Thierry) [2157968] - regulator: qcom_spmi: Add PM6125 PMIC support (Adrien Thierry) [2157968] - regulator: qcom_spmi: Sort pmics alphabetically (part 2) (Adrien Thierry) [2157968] - regulator: qcom_spmi: Sort pmics alphabetically (part 1) (Adrien Thierry) [2157968] - regulator: qcom_spmi: Add support for LDO_510 and FTSMPS (Adrien Thierry) [2157968] - regulator: qcom_spmi: Add support for HFSMPS regulator type (Adrien Thierry) [2157968] - regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load() (Adrien Thierry) [2157968] - regulator: qcom_spmi: add support for PMP8074 regulators (Adrien Thierry) [2157968] - regulator: qcom_spmi: add support for HT_P600 (Adrien Thierry) [2157968] - regulator: qcom_spmi: add support for HT_P150 (Adrien Thierry) [2157968] - regulator: qcom_smd: Add PM8909 RPM regulators (Adrien Thierry) [2157968] - regulator: qcom_smd: Fix pm8916_pldo range (Adrien Thierry) [2157968] - regulator: qcom_smd: add get_voltage to MP5496 (Adrien Thierry) [2157968] - regulator: qcom_smd: correct MP5496 ranges (Adrien Thierry) [2157968] - regulator: qcom_smd: Fix up PM8950 regulator configuration (Adrien Thierry) [2157968] Resolves: rhbz#2125474 Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
This commit is contained in:
Luis Claudio R. Goncalves
parent
fc72bd4372
commit
0e1dbed22a
|
|
@ -12,7 +12,7 @@ RHEL_MINOR = 2
|
|||
#
|
||||
# Use this spot to avoid future merge conflicts.
|
||||
# Do not trim this comment.
|
||||
RHEL_RELEASE = 270
|
||||
RHEL_RELEASE = 271
|
||||
|
||||
#
|
||||
# ZSTREAM
|
||||
|
|
@ -66,4 +66,4 @@ ifneq ("$(ZSTREAM)", "yes")
|
|||
endif
|
||||
endif
|
||||
|
||||
RTBUILD:=.270
|
||||
RTBUILD:=.271
|
||||
|
|
|
|||
|
|
@ -5791,7 +5791,7 @@ CONFIG_SPI_QUP=y
|
|||
# CONFIG_SPI_SLAVE is not set
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
# CONFIG_SPI_TEGRA20_SFLASH is not set
|
||||
# CONFIG_SPI_TEGRA210_QUAD is not set
|
||||
CONFIG_SPI_TEGRA210_QUAD=m
|
||||
# CONFIG_SPI_THUNDERX is not set
|
||||
# CONFIG_SPI_TLE62X0 is not set
|
||||
# CONFIG_SPI_XCOMM is not set
|
||||
|
|
|
|||
|
|
@ -5766,7 +5766,7 @@ CONFIG_SPI_QUP=y
|
|||
# CONFIG_SPI_SLAVE is not set
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
# CONFIG_SPI_TEGRA20_SFLASH is not set
|
||||
# CONFIG_SPI_TEGRA210_QUAD is not set
|
||||
CONFIG_SPI_TEGRA210_QUAD=m
|
||||
# CONFIG_SPI_THUNDERX is not set
|
||||
# CONFIG_SPI_TLE62X0 is not set
|
||||
# CONFIG_SPI_XCOMM is not set
|
||||
|
|
|
|||
572
kernel.spec
572
kernel.spec
|
|
@ -135,15 +135,15 @@ Summary: The Linux kernel
|
|||
# define buildid .local
|
||||
%define specversion 5.14.0
|
||||
%define patchversion 5.14
|
||||
%define pkgrelease 270.rt14.270
|
||||
%define pkgrelease 271.rt14.271
|
||||
%define kversion 5
|
||||
%define tarfile_release 5.14.0-270.rt14.270.el9
|
||||
%define tarfile_release 5.14.0-271.rt14.271.el9
|
||||
# This is needed to do merge window version magic
|
||||
%define patchlevel 14
|
||||
# This allows pkg_release to have configurable %%{?dist} tag
|
||||
%define specrelease 270.rt14.270%{?buildid}%{?dist}
|
||||
%define specrelease 271.rt14.271%{?buildid}%{?dist}
|
||||
# This defines the kabi tarball version
|
||||
%define kabiversion 5.14.0-270.rt14.270.el9
|
||||
%define kabiversion 5.14.0-271.rt14.271.el9
|
||||
|
||||
#
|
||||
# End of genspec.sh variables
|
||||
|
|
@ -3470,6 +3470,570 @@ fi
|
|||
#
|
||||
#
|
||||
%changelog
|
||||
* Thu Feb 16 2023 Luis Claudio R. Goncalves <lgoncalv@redhat.com> [5.14.0-271.rt14.271.el9]
|
||||
- [rt] build kernel-rt-5.14.0-271.rt14.271.el9 [2125474]
|
||||
- spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers (Mark Salter) [2071848 2122415]
|
||||
- spi: bcm2835aux: Convert to use GPIO descriptors (Mark Salter) [2071848 2122415]
|
||||
- spi: bcm2835aux: use 'unsigned int' instead of 'unsigned' (Mark Salter) [2071848 2122415]
|
||||
- redhat/configs: enable CONFIG_SPI_TEGRA210_QUAD (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: spi_imx_transfer_one(): check for DMA transfer first (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: Fix duplicate resource error (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Fix SPI_SPD7 value (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: Don't initialise DMA if not supported (Mark Salter) [2071848 2122415]
|
||||
- spi: qup: support using GPIO as chip select line (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: Fix combined sequence (Mark Salter) [2071848 2122415]
|
||||
- spi: Ensure that sg_table won't be used after being freed (Mark Salter) [2071848 2122415]
|
||||
- spi: Split transfers larger than max size (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix cache corruption due to DMA/PIO overlap (Mark Salter) [2071848 2122415]
|
||||
- spi: Save current RX and TX DMA devices (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-fsl-qspi: Use devm_platform_ioremap_resource_byname() (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-fsl-lpspi: Use devm_platform_get_and_ioremap_resource() (Mark Salter) [2071848 2122415]
|
||||
- spi: Group cs_change and cs_off flags together in struct spi_transfer (Mark Salter) [2071848 2122415]
|
||||
- spi: lpspi: Remove the unneeded result variable (Mark Salter) [2071848 2122415]
|
||||
- spi: Add capability to perform some transfer with chipselect off (Mark Salter) [2071848 2122415]
|
||||
- spi: nxp-fspi: Do not dereference fwnode in struct device (Mark Salter) [2071848 2122415]
|
||||
- spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime() (Mark Salter) [2071848 2122415]
|
||||
- spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume() (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Fix speed selection (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Configure device speed (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Remove the unneeded result variable (Mark Salter) [2071848 2122415]
|
||||
- spi: move from strlcpy with unused retval to strscpy (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Setup all xfers before opcode execution (Mark Salter) [2071848 2122415]
|
||||
- spi: lpspi: Simplify some error message (Mark Salter) [2071848 2122415]
|
||||
- spi: spi: Fix queue hang if previous transfer failed (Mark Salter) [2071848 2122415]
|
||||
- spi: mux: Fix mux interaction with fast path optimisations (Mark Salter) [2071848 2122415]
|
||||
- spi: spi.c: Add missing __percpu annotations in users of spi_statistics (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix simplification of devm_spi_register_controller (Mark Salter) [2071848 2122415]
|
||||
- spi: remove duplicate parameters check in acpi_spi_add_resource() (Mark Salter) [2071848 2122415]
|
||||
- spi: propagate error code to the caller of acpi_spi_device_alloc() (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Add struct and enum kernel-doc comments (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Drop io_base_addr member from struct amd_spi (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Make use of dev_err_probe() (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Make use of devm_spi_alloc_master() (Mark Salter) [2071848 2122415]
|
||||
- spi: Use device_find_any_child() instead of custom approach (Mark Salter) [2071848 2122415]
|
||||
- spi: spi.c: Remove redundant else block (Mark Salter) [2071848 2122415]
|
||||
- spi: spi.c: Fix comment style (Mark Salter) [2071848 2122415]
|
||||
- spi: spi.c: White-space fix in __spi_pump_messages() (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Add support for Intel Meteor Lake-P (Mark Salter) [2071848 2122415]
|
||||
- spi: opportunistically skip ctlr->cur_msg_completion (Mark Salter) [2071848 2122415]
|
||||
- spi: Ensure the io_mutex is held until spi_finalize_current_message() (Mark Salter) [2071848 2122415]
|
||||
- spi: Set ctlr->cur_msg also in the sync transfer case (Mark Salter) [2071848 2122415]
|
||||
- spi: Remove unneeded READ_ONCE for ctlr->busy flag (Mark Salter) [2071848 2122415]
|
||||
- spi: Remove the now unused ctlr->idling flag (Mark Salter) [2071848 2122415]
|
||||
- spi: Remove check for idling in __spi_pump_messages() (Mark Salter) [2071848 2122415]
|
||||
- spi: Remove check for controller idling in spi sync path (Mark Salter) [2071848 2122415]
|
||||
- spi: __spi_pump_messages: Consolidate spin_unlocks to goto target (Mark Salter) [2071848 2122415]
|
||||
- spi: Lock controller idling transition inside the io_mutex (Mark Salter) [2071848 2122415]
|
||||
- spi: Don't use the message queue if possible in spi_sync (Mark Salter) [2071848 2122415]
|
||||
- spi: Move ctlr->cur_msg_prepared to struct spi_message (Mark Salter) [2071848 2122415]
|
||||
- spi: core: Fix error code in spi_register_controller() (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: Multi-cs support (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix per-cpu stats access on 32 bit systems (Mark Salter) [2071848 2122415]
|
||||
- spi: <linux/spi/spi.h>: Add missing documentation for struct members (Mark Salter) [2071848 2122415]
|
||||
- spi: spi.c: Convert statistics to per-cpu u64_stats_t (Mark Salter) [2071848 2122415]
|
||||
- spi: fix typo in comment (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Limit max transfer and message size (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: add PIO polling support (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: spi_imx_buf_rx_swap_u32(): replace open coded swahw32s() (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: spi_imx_buf_rx_swap_u32(): fix sparse warning: use swab32s() instead of cpu_to_be32() (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: mx51_ecspi_intctrl(): prefer 'unsigned int' to bare use of 'unsigned' (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: avoid unnecessary line continuations (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: fix sparse warning: add identifier name to function definition (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-fsl-qspi: check return value after calling platform_get_resource_byname() (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: complete conversion from master -> controller (Mark Salter) [2071848 2122415]
|
||||
- spi: core: Display return code when failing to transfer message (Mark Salter) [2071848 2122415]
|
||||
- spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller (Mark Salter) [2071848 2122415]
|
||||
- spi: Use helper for safer setting of driver_override (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: using pm_runtime_resume_and_get instead of pm_runtime_get_sync (Mark Salter) [2071848 2122415]
|
||||
- spi: core: Initialize returned status in spi_setup (Mark Salter) [2071848 2122415]
|
||||
- spi: using pm_runtime_resume_and_get instead of pm_runtime_get_sync (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-imx: add support for SPI_RX_CPHA_FLIP (Mark Salter) [2071848 2122415]
|
||||
- spi: add SPI_RX_CPHA_FLIP mode bit (Mark Salter) [2071848 2122415]
|
||||
- spi: core: Only check bits_per_word validity when explicitly provided (Mark Salter) [2071848 2122415]
|
||||
- spi: core: add dma_map_dev for __spi_unmap_msg() (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix erroneous sgs value with min_t() (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: combined sequence mode (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: add acpi support (Mark Salter) [2071848 2122415]
|
||||
- spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ (Mark Salter) [2071848 2122415]
|
||||
- spi: use specific last_cs instead of last_cs_enable (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: add new chips to compatible (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: use device_reset method (Mark Salter) [2071848 2122415]
|
||||
- spi: use sysfs_emit() for printing statistics and add trailing newline (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Fix building without ACPI enabled (Mark Salter) [2071848 2122415]
|
||||
- spi: Retire legacy GPIO handling (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Add support for version AMDI0062 (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Remove needless rom_addr variable (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Use iopoll for busy waiting (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-mem: Introduce a capability structure (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: Fix missin IRQ check in tegra_qspi_probe (Mark Salter) [2071848 2122415]
|
||||
- spi: Make spi_alloc_device and spi_add_device public again (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx_spi: Convert to use GPIO descriptors (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix invalid sgs value (Mark Salter) [2071848 2122415]
|
||||
- spi: don't include ptp_clock_kernel.h in spi.h (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Propagate firmware node (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix incorrect cs_setup delay handling (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Get rid of unused enable_loopback member (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Get rid of unused ->cs_control() (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: use devm call for cdata memory (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix condition in the __spi_register_driver() (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Remove redundant ->read() and ->write() in struct chip_data (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix multi-line comment style (Mark Salter) [2071848 2122415]
|
||||
- spi: Replace memset() with __GFP_ZERO (Mark Salter) [2071848 2122415]
|
||||
- spi: deduplicate spi_match_id() in __spi_register_driver() (Mark Salter) [2071848 2122415]
|
||||
- spi: xlp: Remove Netlogic XLP variants (Mark Salter) [2071848 2122415]
|
||||
- spi: lpspi: release requested DMA channels (Mark Salter) [2071848 2122415]
|
||||
- spi: fix use-after-free of the add_lock mutex (Mark Salter) [2071848 2122415]
|
||||
- spi: lpspi: Silence error message upon deferred probe (Mark Salter) [2071848 2122415]
|
||||
- rtc: ds1390: Add SPI ID table (Mark Salter) [2071848 2122415]
|
||||
- rtc: mcp795: Add SPI ID table (Mark Salter) [2071848 2122415]
|
||||
- spi: tegra210-quad: Put device into suspend on driver removal (Mark Salter) [2071848 2122415]
|
||||
- spi: Check we have a spi_device_id for each DT compatible (Mark Salter) [2071848 2122415]
|
||||
- spi: Make several public functions private to spi.c (Mark Salter) [2071848 2122415]
|
||||
- spi: Reorder functions to simplify the next commit (Mark Salter) [2071848 2122415]
|
||||
- spi: Remove unused function spi_busnum_to_master() (Mark Salter) [2071848 2122415]
|
||||
- spi: Move comment about chipselect check to the right place (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Don't wait for a write-only transfer to finish (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Remove unneeded variable (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Refactor amd_spi_busy_wait (Mark Salter) [2071848 2122415]
|
||||
- spi: amd: Refactor code to use less spi_master_get_devdata (Mark Salter) [2071848 2122415]
|
||||
- spi: spl022: fix Microwire full duplex mode (Mark Salter) [2071848 2122415]
|
||||
- spi-mux: Fix false-positive lockdep splats (Mark Salter) [2071848 2122415]
|
||||
- spi: Fix deadlock when adding SPI controllers on SPI buses (Mark Salter) [2071848 2122415]
|
||||
- spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround (Mark Salter) [2071848 2122415]
|
||||
- nfc: st-nci: Add SPI ID matching DT compatible (Mark Salter) [2071848 2122415]
|
||||
- spi: Revert modalias changes (Mark Salter) [2071848 2122415]
|
||||
- spi: <linux/spi/spi.h>: add missing struct kernel-doc entry (Mark Salter) [2071848 2122415]
|
||||
- spi: move cs spi_delay to spi_device (Mark Salter) [2071848 2122415]
|
||||
- spi: imx: Implement support for CS_WORD (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Adapt reset_sccr1() to the case when no message available (Mark Salter) [2071848 2122415]
|
||||
- spi: imx: remove ERR009165 workaround on i.mx6ul (Mark Salter) [2071848 2122415]
|
||||
- spi: imx: fix ERR009165 (Mark Salter) [2071848 2122415]
|
||||
- spi: imx: Simplify logic in spi_imx_push() (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Reuse int_stop_and_reset() in couple of places (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Reset DMA bits in CR1 in reset_sccr1() (Mark Salter) [2071848 2122415]
|
||||
- spi: pxa2xx: Convert reset_sccr1() to use pxa2xx_spi_update() (Mark Salter) [2071848 2122415]
|
||||
- i2c: qcom-geni: add support for I2C Master Hub variant (Andrew Halaney) [2164495]
|
||||
- i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant (Andrew Halaney) [2164495]
|
||||
- i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer (Andrew Halaney) [2164495]
|
||||
- clk: qcom: rpmh: add support for SM6350 rpmh IPA clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8974: move clock parent tables down (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8974: move clock parent tables down (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: remove usage of platform name (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: rename VRM clock data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: rename ARC clock data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: support separate symbol name for the RPMH clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: remove platform names from BCM clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: drop all _ao names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: reuse common duplicate clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: group clock definitions together (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpm: drop the platform from clock definitions (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpm: drop the _clk suffix completely (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpm: drop separate active-only names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpm: remove unused active-only clock names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add GCC driver for SM8550 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add LUCID_OLE PLL type for SM8550 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: Increase status poll timeout (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Add rates to the GP clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: hfpll: use devm_platform_get_and_ioremap_resource() (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: populate fw_name for all parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: krait-cc: convert to parent_data API (Adrien Thierry) [2158909]
|
||||
- clk: qcom: krait-cc: convert to devm_clk_hw_register (Adrien Thierry) [2158909]
|
||||
- clk: qcom: krait-cc: handle secondary mux sourcing out of acpu_aux (Adrien Thierry) [2158909]
|
||||
- clk: qcom: krait-cc: also enable secondary mux and div clk (Adrien Thierry) [2158909]
|
||||
- clk: qcom: krait-cc: fix wrong parent order for secondary mux (Adrien Thierry) [2158909]
|
||||
- clk: qcom: krait-cc: use devm variant for clk notifier register (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-krait: fix wrong div2 functions (Adrien Thierry) [2158909]
|
||||
- clk: qcom: kpss-xcc: register it as clk provider (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: add missing networking resets (Adrien Thierry) [2158909]
|
||||
- clk: qcom: reset: support resetting multiple bits (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpass-sc7180: Avoid an extra "struct dev_pm_ops" (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpass-sc7180: Fix pm_runtime usage (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpass-sc7280: Fix pm_runtime usage (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add display clock controller driver for SM6375 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add SC8280XP display clock controller (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: convert to parent data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add support for QDU1000 and QRU1000 RPMh clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: dispcc-sm8250: Disable link_div_clk_src for sm8150 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: dispcc-sm8250: Add missing EDP clocks for sm8350 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: dispcc-sm8250: Add RETAIN_FF_ENABLE flag for mdss_gdsc (Adrien Thierry) [2158909]
|
||||
- clk: qcom: dispcc-sm8250: Disable EDP_GTC for sm8350 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: dispcc-sm6350: Add CLK_OPS_PARENT_ENABLE to pixel&byte src (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6125: Remove gpll7 from sdcc2_apps (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: use parent_data for the last remaining entry (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: Remove direct runtime PM calls (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Update the force mem core bit for GPU clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6375: Ensure unsigned long type (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6375: Remove unused variables (Adrien Thierry) [2158909]
|
||||
- clk: qcom: kpss-xcc: convert to parent data API (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: use parent_hws where possible (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc8280xp: use retention for USB power domains (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: add missing error handling (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add global clock controller driver for SM6375 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: Fix the handling of PWRSTS_RET support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add SC8280XP GPU clock controller (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd: Add SM6375 clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmhcc: add sdm670 clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Merge alt alpha plls for qcm2260, sm6115 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6115: Move alpha pll bramo overrides (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6115: Override default Alpha PLL regs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add support for Display Clock Controller on SM8450 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: alpha-pll: add support for power off mode for lucid evo PLL (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add display clock controller driver for SM6115 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc7280: Update the .pwrsts for PCIe GDSC (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpass: Fix lpass audiocc probe (Adrien Thierry) [2158909]
|
||||
- clk: qcom: apss-ipq-pll: add support for IPQ8074 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: apss-ipq-pll: update IPQ6018 Alpha PLL config (Adrien Thierry) [2158909]
|
||||
- clk: qcom: apss-ipq-pll: use OF match data for Alpha PLL config (Adrien Thierry) [2158909]
|
||||
- clk: qcom: apss-ipq6018: mark apcs_alias0_core_clk as critical (Adrien Thierry) [2158909]
|
||||
- clk: qcom: apss-ipq6018: fix apcs_alias0_clk_src (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rcg2: add rcg2 mux ops (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lcc-ipq806x: use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lcc-ipq806x: convert to parent data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lcc-ipq806x: add reset definition (Adrien Thierry) [2158909]
|
||||
- clk: qcom: cpu-8996: use constant mask for pmux (Adrien Thierry) [2158909]
|
||||
- clk: qcom: cpu-8996: don't store parents in clk_cpu_8996_pmux (Adrien Thierry) [2158909]
|
||||
- clk: qcom: cpu-8996: move ACD logic to clk_cpu_8996_pmux_determine_rate (Adrien Thierry) [2158909]
|
||||
- clk: qcom: cpu-8996: declare ACD clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: cpu-8996: switch to devm_clk_notifier_register (Adrien Thierry) [2158909]
|
||||
- clk: qcom: msm8996-cpu: Use parent_data/_hws for all clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: msm8996-cpu: Convert secondary muxes to clk_regmap_mux (Adrien Thierry) [2158909]
|
||||
- clk: qcom: msm8996-cpu: Unify cluster order (Adrien Thierry) [2158909]
|
||||
- clk: qcom: msm8996-cpu: Statically define PLL dividers (Adrien Thierry) [2158909]
|
||||
- clk: qcom: msm8996-cpu: Rename DIV_2_INDEX to SMUX_INDEX (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d (Adrien Thierry) [2158909]
|
||||
- clk: Introduce the clk_hw_get_rate_range function (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd-rpm: Add clocks for MSM8909 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8909: Increase delay for USB PHY reset (Adrien Thierry) [2158909]
|
||||
- clk: qcom: reset: Allow specifying custom reset delay (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add driver for MSM8909 GCC (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8960: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8960: move clock parent tables down (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8960: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lcc-msm8960: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lcc-msm8960: use macros to implement mi2s clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8960: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8960: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rpmh: Remove redundant if statement (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sdm845: add sdm670 global clock data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sdm845: use device tree match data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: a53-pll: convert to use parent_data rather than parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8660: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8660: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: sm6115: Select QCOM_GDSC (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpass: Add support for resets & external mclk for SC7280 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aon (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sdm660: Use floor ops for SDCC1 clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8916: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8916: move gcc_mss_q6_bimc_axi_clk down (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8916: move GPLL definitions up (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8916: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: gcc-sc8280xp: keep USB power-domains always-on (Adrien Thierry) [2158909]
|
||||
- clk: gcc-sc8280xp: keep PCIe power-domains always-on (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rpm: convert to parent_data API (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Drop mmcx gdsc supply for dispcc and videocc (Adrien Thierry) [2158909]
|
||||
- clk: qcom: fix build error initializer element is not constant (Adrien Thierry) [2158909]
|
||||
- clk: qcom: add support for SM8350 DISPCC (Adrien Thierry) [2158909]
|
||||
- clk: qcom: add support for SM8350 GPUCC (Adrien Thierry) [2158909]
|
||||
- clk: qcom: add camera clock controller driver for SM8450 SoC (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfaces (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed code (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure description (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8960: create tsens device if there are no child nodes (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8916: Add rates to the GP clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rcg2: Make sure to not write d=0 to the NMD register (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rcg2: Fail Duty-Cycle configuration if MND divider is not enabled. (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sm8250: Fix topology around titan_top power domain (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sdm845: Fix topology around titan_top power domain (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: dont disable gcc_sleep_clk_src (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: add USB GDSCs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: set BRANCH_HALT_DELAY flag for UBI clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: add PPE crypto clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: fix NSS port frequency tables (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: SW workaround for UBI32 PLL lock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: fix NSS core PLL-s (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Point MM peripherals to system_mm_noc clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Add missing system_mm_noc_bfdcd_clk_src (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8939: Fix bimc_ddr_clk_src rcgr base address (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc8280xp: use phy-mux clock for PCIe (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-krait: add apq/ipq8064 errata workaround (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-krait: unlock spin after mux completion (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-hfpll: use poll_timeout macro (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6350: Drop extra semicolon (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc8280xp: use collapse-voting for PCIe GDSCs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: add support for collapse-vote registers (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: add collapse-bit helper (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sm8250: Fix halt on boot by reducing driver's init level (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: regmap: add PHY clock source implementation (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8996: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8996: move clock parent tables down (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8996: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: Add note about sleep/wake state for BCMs (Adrien Thierry) [2158909]
|
||||
- Revert "clk: qcom: regmap-mux: add pipe clk implementation" (Adrien Thierry) [2158909]
|
||||
- Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" (Adrien Thierry) [2158909]
|
||||
- Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rcg2: Cache CFG register updates for parked RCGs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8976: Add modem reset (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8976: Set floor ops for SDCC (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd: Update MSM8976 RPM clocks. (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rcg2: fix gfx3d frequency calculation (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8998: add SSC-related clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpass: Add support for LPASS clock controller for SC7280 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: regmap-mux: add pipe clk implementation (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Fix gpll4 width (Adrien Thierry) [2158909]
|
||||
- clk: qcom: sm6125-gcc: fix typos in comments (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add display clock controller driver for SM6125 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc: Add emac GDSC support for SM8150 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc: sm8150: Fix some identation issues (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rcg2: Update the frac table for pixel clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rcg2: Update logic to calculate D value for RCG (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd: Add missing MSM8998 RPM clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd: Add missing RPM clocks for msm8992/4 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: add CryptoEngine resets (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: add CryptoEngine clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: add additional freq for sdc table (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-rcg: add clk_rcg_floor_ops ops (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: add unusued flag for critical clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: add additional freq nss cores (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: convert parent_names to parent_data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add SDX65 APCS clock controller support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add A7 PLL support for SDX65 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add GPU clock controller driver for SM6350 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add display clock controller driver for SM6350 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Declare mux table as const u32[] (Adrien Thierry) [2158909]
|
||||
- clk: qcom: dispcc: Update the transition delay for MDSS GDSC (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: Add support to update GDSC transition delay (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: Use floor ops for SDCC1 clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Remove NoC clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add MSM8226 Multimedia Clock Controller support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8996: start getting rid of xo clk (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8996: use parent_hws/_data instead of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8996: move clock parent tables down (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8996: drop unsupported clock sources (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8996: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: videocc-sc7180: use parent_hws instead of parent_data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sdm845: convert to parent_hws/_data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sdm845: move clock parent tables down (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sdm845: get rid of the test clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sdm845: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sc7180: use parent_hws instead of parent_data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sc7180: get rid of the test clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc-sc7180: use ARRAY_SIZE instead of specifying num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gpucc-sdm660: use parent_hws instead of parent_data (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gpucc-sdm660: get rid of the test clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gpucc-sdm660: fix two clocks with parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add display clock controller driver for QCM2290 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: ipq8074: fix PCI-E clock oops (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabled (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-alpha-pll: Increase PLL lock detect poll time (Adrien Thierry) [2158909]
|
||||
- clk: qcom: turingcc-qcs404: explicitly include clk-provider.h (Adrien Thierry) [2158909]
|
||||
- clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-apq8084: explicitly include clk-provider.h (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h (Adrien Thierry) [2158909]
|
||||
- clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6350: explicitly include clk-provider.h (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: explicitly include clk-provider.h (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm8350: explicitly include clk-provider.h (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add clock driver for SM8450 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add SDX65 GCC support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add LUCID_EVO PLL type for SDX65 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: add support for SM8450 rpmh clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd-rpm: Drop binary value handling for buffered clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd-rpm: Drop the use of struct rpm_cc (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd-rpm: Drop MFD qcom-rpm reference (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add support for SDX65 RPMh clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: clk-alpha-pll: Don't reconfigure running Trion (Adrien Thierry) [2158909]
|
||||
- clk: qcom: regmap-mux: fix parent clock lookup (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gdsc: enable optional power domain support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: videocc-sm8250: use runtime PM for the clock controller (Adrien Thierry) [2158909]
|
||||
- clk: qcom: dispcc-sm8250: use runtime PM for the clock controller (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sc7280: Drop unused array (Adrien Thierry) [2158909]
|
||||
- clk: qcom: camcc: Add camera clock controller driver for SC7280 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add lpass clock controller driver for SC7280 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Kconfig: Sort the symbol for SC_LPASS_CORECC_7180 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-sdm660: Add hw_ctrl flag to venus_core0_gdsc (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdsc (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Use ARRAY_SIZE() for num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Add proper msm8992 support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Add modem reset (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Remove the inexistent GDSC_PCIE (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Add missing clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Add missing NoC clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Fix up SPI QUP clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8994: Modernize the driver (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd-rpm: Add QCM2290 RPM clock support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_ops (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add Global Clock Controller driver for QCM2290 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: add select QCOM_GDSC for SM6350 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc: Remove CPUSS clocks control for SC7280 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Remove redundant .owner (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8998: Remove unnecessary fallbacks to global clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gpucc-msm8998: Remove unnecessary fallbacks to global clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8998: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gpucc-msm8998: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8998: Remove transient global "xo" clock (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8998: Use parent_data/hws for internal clock relations (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-msm8998: Move parent names and mapping below GPLLs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: kpss-xcc: Make use of the helper function devm_platform_ioremap_resource() (Adrien Thierry) [2158909]
|
||||
- clk: qcom: common: Make use of the helper function devm_platform_ioremap_resource() (Adrien Thierry) [2158909]
|
||||
- clk: qcom: a53-pll: Make use of the helper function devm_platform_ioremap_resource() (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gpucc-sdm660: Remove fallback to global clock names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-sdm660: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gpucc-sdm660: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sdm660: Use ARRAY_SIZE for num_parents (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sm6350: Remove unused variable (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add SM6350 GCC driver (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmh: Add support for RPMH clocks on SM6350 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add Global Clock controller (GCC) driver for SM6115 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: mmcc-msm8994: Add MSM8992 support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add msm8994 MMCC driver (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add Global Clock Controller driver for MSM8953 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sdm660: Replace usage of parent_names (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gcc-sdm660: Move parent tables after PLLs (Adrien Thierry) [2158909]
|
||||
- clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create (Adrien Thierry) [2158909]
|
||||
- clk: qcom: a53-pll: Add MSM8939 a53pll support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: a53pll/mux: Use unique clock name (Adrien Thierry) [2158909]
|
||||
- clk: qcom: apcs-msm8916: Flag a53mux instead of a53pll as critical (Adrien Thierry) [2158909]
|
||||
- clk: qcom: gpucc-sm8150: Add SC8180x support (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd-rpm: Add mdm9607 clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: rpmcc: Add support for MSM8953 RPM clocks. (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd: Add support for SM6115 rpm clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: smd: Add support for SM6125 rpm clocks (Adrien Thierry) [2158909]
|
||||
- clk: qcom: dispcc-sm8250: Add additional parent clocks for DP (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add video clock controller driver for SC7280 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add graphics clock controller driver for SC7280 (Adrien Thierry) [2158909]
|
||||
- clk: qcom: Add display clock controller driver for SC7280 (Adrien Thierry) [2158909]
|
||||
- soc: qcom: geni-se: add support for I2C Master Hub wrapper variant (Brian Masney) [2158216]
|
||||
- soc: qcom: geni-se: add desc struct to specify clocks from device match data (Brian Masney) [2158216]
|
||||
- soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table (Brian Masney) [2158216]
|
||||
- soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table (Brian Masney) [2158216]
|
||||
- soc: qcom: Select REMAP_MMIO for ICC_BWMON driver (Brian Masney) [2158216]
|
||||
- soc: qcom: Select REMAP_MMIO for LLCC driver (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmpd: Add SM4250 support (Brian Masney) [2158216]
|
||||
- soc: qcom: llcc: Add configuration data for SM8550 (Brian Masney) [2158216]
|
||||
- soc: qcom: llcc: Add v4.1 HW version support (Brian Masney) [2158216]
|
||||
- soc: qcom: socinfo: Add SM8550 ID (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmhpd: Add SM8550 power domains (Brian Masney) [2158216]
|
||||
- soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmh-rsc: Write CONTROL_TCS with next timer wakeup (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmh-rsc: Save base address of drv (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmh-rsc: Attach RSC to cluster PM domain (Brian Masney) [2158216]
|
||||
- soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index (Brian Masney) [2158216]
|
||||
- soc: qcom: socinfo: Add QDU1000/QRU1000 SoC IDs to the soc_id table (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmhpd: Add QDU1000/QRU1000 power domains (Brian Masney) [2158216]
|
||||
- soc: qcom: spm: Implement support for SAWv2.3, MSM8976 L2 PM (Brian Masney) [2158216]
|
||||
- soc: qcom: llcc: make irq truly optional (Brian Masney) [2158216]
|
||||
- soc: qcom: spm: Add MSM8939 SPM register data (Brian Masney) [2158216]
|
||||
- soc: qcom: stats: Mark device as having no PM support (Brian Masney) [2158216]
|
||||
- soc: qcom: cmd-db: Mark device as having no PM support (Brian Masney) [2158216]
|
||||
- soc: qcom: pdr: Make QMI message rules const (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmhpd: Use highest corner until sync_state (Brian Masney) [2158216]
|
||||
- soc: qcom: smd-rpm: Add SM6375 compatible (Brian Masney) [2158216]
|
||||
- soc: qcom: smd-rpm: Replace zero-length array with DECLARE_FLEX_ARRAY() helper (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmhpd: add sdm670 power domains (Brian Masney) [2158216]
|
||||
- soc: qcom: socinfo: create soc_id table from bindings (Brian Masney) [2158216]
|
||||
- soc: qcom: move from strlcpy with unused retval to strscpy (Brian Masney) [2158216]
|
||||
- soc: qcom: rpmpd: Add SM6375 support (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: force clear counter/irq registers (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: add support for sc7280 LLCC BWMON (Brian Masney) [2158216]
|
||||
- soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver (Brian Masney) [2158216]
|
||||
- soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version (Brian Masney) [2158216]
|
||||
- soc: qcom: qmi: use const for struct qmi_elem_info (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: remove redundant ret variable (Brian Masney) [2158216]
|
||||
- soc: qcom: stats: Add SDM845 stats config and compatible (Brian Masney) [2158216]
|
||||
- soc: qcom: socinfo: Add PM6125 ID (Brian Masney) [2158216]
|
||||
- soc: qcom: socinfo: Add an ID for SM6375 (Brian Masney) [2158216]
|
||||
- soc: qcom: smem_state: Add refcounting for the 'state->of_node' (Brian Masney) [2158216]
|
||||
- soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: add support for SDM845 LLCC BWMON (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: add per-variant quirks (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: use regmap and prepare for BWMON v5 (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: store count unit per variant (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: clear all registers on init (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: store reference to variant data in container (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: drop unused registers (Brian Masney) [2158216]
|
||||
- soc: qcom: icc-bwmon: re-use IRQ enable/clear define (Brian Masney) [2158216]
|
||||
- PM: domains: Store the next hrtimer wakeup in genpd (Brian Masney) [2158216]
|
||||
- soc: dt-bindings: qcom: add gpr bindings (Brian Masney) [2158216]
|
||||
- dt-bindings: power: rpmpd: Add SM4250 support (Brian Masney) [2158216]
|
||||
- dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding (Brian Masney) [2158216]
|
||||
- dt-bindings: power: rpmpd: Add QDU1000/QRU1000 to rpmpd binding (Brian Masney) [2158216]
|
||||
- dt-bindings: power: rpmpd: add sdm670 power domains (Brian Masney) [2158216]
|
||||
- dt-bindings: power: rpmpd: Add SM6375 power domains (Brian Masney) [2158216]
|
||||
- dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains (Brian Masney) [2158216]
|
||||
- dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants (Brian Masney) [2158216]
|
||||
- dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155 (Brian Masney) [2158216]
|
||||
- dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976 (Brian Masney) [2158216]
|
||||
- dt-bindings: arm: qcom,ids: Add SoC IDs for QDU1000/QRU1000 (Brian Masney) [2158216]
|
||||
- dt-bindings: arm: qcom: document qcom,msm-id and qcom,board-id (Brian Masney) [2158216]
|
||||
- regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() (Adrien Thierry) [2157968]
|
||||
- regulator: qcom-rpmh: Add support for PM8550 regulators (Adrien Thierry) [2157968]
|
||||
- regulator: qcom-rpmh: Fix PMR735a S3 regulator spec (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Fix PMR735a S3 regulator spec (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Add PMR735a regulators (Adrien Thierry) [2157968]
|
||||
- regulator: qcom-rpmh: add pm660 and pm660l pmics (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_rpm: Fix circular deferral regression (Adrien Thierry) [2157968]
|
||||
- regulator: core: Don't err if allow-set-load but no allowed-modes (Adrien Thierry) [2157968]
|
||||
- regulator: core: Require regulator drivers to check uV for get_optimum_mode() (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Add PM6125 RPM regulators (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Sort pmics alphabetically (part 3) (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Sort pmics alphabetically (part 2) (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Sort pmics alphabetically (part 1) (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_spmi: Add PM6125 PMIC support (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_spmi: Sort pmics alphabetically (part 2) (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_spmi: Sort pmics alphabetically (part 1) (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_spmi: Add support for LDO_510 and FTSMPS (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_spmi: Add support for HFSMPS regulator type (Adrien Thierry) [2157968]
|
||||
- regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load() (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_spmi: add support for PMP8074 regulators (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_spmi: add support for HT_P600 (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_spmi: add support for HT_P150 (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Add PM8909 RPM regulators (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Fix pm8916_pldo range (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: add get_voltage to MP5496 (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: correct MP5496 ranges (Adrien Thierry) [2157968]
|
||||
- regulator: qcom_smd: Fix up PM8950 regulator configuration (Adrien Thierry) [2157968]
|
||||
|
||||
* Wed Feb 15 2023 Luis Claudio R. Goncalves <lgoncalv@redhat.com> [5.14.0-270.rt14.270.el9]
|
||||
- [rt] build kernel-rt-5.14.0-270.rt14.270.el9 [2125474]
|
||||
- rtmutex: Add acquire semantics for rtmutex lock acquisition slow path (Brian Masney) [2163507]
|
||||
|
|
|
|||
6
sources
6
sources
|
|
@ -1,4 +1,4 @@
|
|||
SHA512 (kernel-abi-whitelists-5.13.0-1.tar.bz2) = ceba454e1f590c1e4ef4115a75463ae3ac2c2aa7ec85fa14a2669d666c421483a38225ee19d7d72b4ac7032375741408b23543e43588538c80161ec0cf57051c
|
||||
SHA512 (linux-5.14.0-270.rt14.270.el9.tar.xz) = f2ad54323ddf05415414c2fa43391136e940ccd14ca98c3c223de5d66ce42e77a8c32d8b10fbf9727a2f048f1acb09f517ae0021bec4a33293513b1ca73162d3
|
||||
SHA512 (kernel-abi-stablelists-5.14.0-270.rt14.270.el9.tar.bz2) = af602d8de33d915b21e27474ffaa1507a5696ea4720ba100b2811dcb760d2445e5446ee419df9ddd02070888b3f21d7bc4c6086c2f7b475f5e2b1c06fe6380c8
|
||||
SHA512 (kernel-kabi-dw-5.14.0-270.rt14.270.el9.tar.bz2) = 565f812fa83a756ef7b91219031cfe80b1e853f22b4ed38ada76aed482caaf89df35e4d220f45728392765a757f8b0798e3b5a57fee0114e1d0379e887772578
|
||||
SHA512 (linux-5.14.0-271.rt14.271.el9.tar.xz) = 7b66c0b9ce8bfe845ddfa7ade4f9445204827bd0fb90b171c0296110d0ba967883319e88c60d5949c8de3dca65fdf42d11ae893c0e03ae85a1787dea6a7abb7b
|
||||
SHA512 (kernel-abi-stablelists-5.14.0-271.rt14.271.el9.tar.bz2) = cbf681967b35750482a06b3160f566c573caaa79cc8efe49661ab14272e7604cfda121997461fb146f1e71736527f829f180cc8dbcd3ec437a6fb6a563bca976
|
||||
SHA512 (kernel-kabi-dw-5.14.0-271.rt14.271.el9.tar.bz2) = 565f812fa83a756ef7b91219031cfe80b1e853f22b4ed38ada76aed482caaf89df35e4d220f45728392765a757f8b0798e3b5a57fee0114e1d0379e887772578
|
||||
|
|
|
|||
Loading…
Reference in New Issue