.gitignore

@@ -1 +1 @@
-SOURCES/ipxe-20181214-git133f4c47.tar.xz
+SOURCES/ipxe-20200823-git4bd064de.tar.xz

.ipxe.metadata

@@ -1 +1 @@
-a79e649fbb476761a9e5a165f3467d783c0a5fe9 SOURCES/ipxe-20181214-git133f4c47.tar.xz
+0441a1fc97256eb89f1e0dccb2067bde8e9cf2a2 SOURCES/ipxe-20200823-git4bd064de.tar.xz

SOURCES/0001-arm-Provide-dummy-implementation-for-in-out-s-b-w-l.patch

@@ -1,129 +0,0 @@
-From c2226b3d1a4d9fc1daeb8dc6b9034d1fb46c1308 Mon Sep 17 00:00:00 2001
-From: Michael Brown <mcb30@ipxe.org>
-Date: Sun, 14 Jul 2019 15:27:01 +0100
-Subject: [PATCH] [arm] Provide dummy implementations for {in,out}[s]{b,w,l}
-
-It is currently not possible to build the all-drivers iPXE binaries
-for ARM, since there is no implementation for inb(), outb(), etc.
-
-There is no common standard for accessing I/O space on ARM platforms,
-and there are almost no ARM-compatible peripherals that actually
-require I/O space accesses.
-
-Provide dummy implementations that behave as though no device is
-present (i.e. ignore writes, return all bits high for reads).  This is
-sufficient to allow the all-drivers binaries to link, and should cause
-drivers to behave as though no I/O space peripherals are present in
-the system.
-
-Signed-off-by: Michael Brown <mcb30@ipxe.org>
----
- src/arch/arm/include/ipxe/arm_io.h | 77 +++++++++++++++++++++++-------
- 1 file changed, 59 insertions(+), 18 deletions(-)
-
-diff --git a/src/arch/arm/include/ipxe/arm_io.h b/src/arch/arm/include/ipxe/arm_io.h
-index f8765af752..105f22bfbf 100644
---- a/src/arch/arm/include/ipxe/arm_io.h
-+++ b/src/arch/arm/include/ipxe/arm_io.h
-@@ -43,42 +43,83 @@ IOAPI_INLINE ( arm, bus_to_phys ) ( unsigned long bus_addr ) {
-  *
-  */
- 
--#define ARM_READX( _api_func, _type, _insn_suffix, _reg_prefix )	      \
-+#define ARM_READX( _suffix, _type, _insn_suffix, _reg_prefix )		      \
- static inline __always_inline _type					      \
--IOAPI_INLINE ( arm, _api_func ) ( volatile _type *io_addr ) {		      \
-+IOAPI_INLINE ( arm, read ## _suffix ) ( volatile _type *io_addr ) {	      \
- 	_type data;							      \
- 	__asm__ __volatile__ ( "ldr" _insn_suffix " %" _reg_prefix "0, %1"    \
- 			       : "=r" ( data ) : "Qo" ( *io_addr ) );	      \
- 	return data;							      \
- }
- #ifdef __aarch64__
--ARM_READX ( readb, uint8_t, "b", "w" );
--ARM_READX ( readw, uint16_t, "h", "w" );
--ARM_READX ( readl, uint32_t, "", "w" );
--ARM_READX ( readq, uint64_t, "", "" );
-+ARM_READX ( b, uint8_t, "b", "w" );
-+ARM_READX ( w, uint16_t, "h", "w" );
-+ARM_READX ( l, uint32_t, "", "w" );
-+ARM_READX ( q, uint64_t, "", "" );
- #else
--ARM_READX ( readb, uint8_t, "b", "" );
--ARM_READX ( readw, uint16_t, "h", "" );
--ARM_READX ( readl, uint32_t, "", "" );
-+ARM_READX ( b, uint8_t, "b", "" );
-+ARM_READX ( w, uint16_t, "h", "" );
-+ARM_READX ( l, uint32_t, "", "" );
- #endif
- 
--#define ARM_WRITEX( _api_func, _type, _insn_suffix, _reg_prefix )			\
-+#define ARM_WRITEX( _suffix, _type, _insn_suffix, _reg_prefix )		      \
- static inline __always_inline void					      \
--IOAPI_INLINE ( arm, _api_func ) ( _type data, volatile _type *io_addr ) {     \
-+IOAPI_INLINE ( arm, write ## _suffix ) ( _type data,			      \
-+					 volatile _type *io_addr ) {	      \
- 	__asm__ __volatile__ ( "str" _insn_suffix " %" _reg_prefix "0, %1"    \
- 			       : : "r" ( data ), "Qo" ( *io_addr ) );	      \
- }
- #ifdef __aarch64__
--ARM_WRITEX ( writeb, uint8_t, "b", "w" );
--ARM_WRITEX ( writew, uint16_t, "h", "w" );
--ARM_WRITEX ( writel, uint32_t, "", "w" );
--ARM_WRITEX ( writeq, uint64_t, "", "" );
-+ARM_WRITEX ( b, uint8_t, "b", "w" );
-+ARM_WRITEX ( w, uint16_t, "h", "w" );
-+ARM_WRITEX ( l, uint32_t, "", "w" );
-+ARM_WRITEX ( q, uint64_t, "", "" );
- #else
--ARM_WRITEX ( writeb, uint8_t, "b", "" );
--ARM_WRITEX ( writew, uint16_t, "h", "" );
--ARM_WRITEX ( writel, uint32_t, "", "" );
-+ARM_WRITEX ( b, uint8_t, "b", "" );
-+ARM_WRITEX ( w, uint16_t, "h", "" );
-+ARM_WRITEX ( l, uint32_t, "", "" );
- #endif
- 
-+/*
-+ * Dummy PIO reads and writes up to 32 bits
-+ *
-+ * There is no common standard for I/O-space access for ARM, and
-+ * non-MMIO peripherals are vanishingly rare.  Provide dummy
-+ * implementations that will allow code to link and should cause
-+ * drivers to simply fail to detect hardware at runtime.
-+ *
-+ */
-+
-+#define ARM_INX( _suffix, _type )					      \
-+static inline __always_inline _type					      \
-+IOAPI_INLINE ( arm, in ## _suffix ) ( volatile _type *io_addr __unused) {     \
-+	return ~( (_type) 0 );						      \
-+}									      \
-+static inline __always_inline void					      \
-+IOAPI_INLINE ( arm, ins ## _suffix ) ( volatile _type *io_addr __unused,      \
-+				       _type *data, unsigned int count ) {    \
-+	memset ( data, 0xff, count * sizeof ( *data ) );		      \
-+}
-+ARM_INX ( b, uint8_t );
-+ARM_INX ( w, uint16_t );
-+ARM_INX ( l, uint32_t );
-+
-+#define ARM_OUTX( _suffix, _type )					      \
-+static inline __always_inline void					      \
-+IOAPI_INLINE ( arm, out ## _suffix ) ( _type data __unused,		      \
-+				       volatile _type *io_addr __unused ) {   \
-+	/* Do nothing */						      \
-+}									      \
-+static inline __always_inline void					      \
-+IOAPI_INLINE ( arm, outs ## _suffix ) ( volatile _type *io_addr __unused,     \
-+					const _type *data __unused,	      \
-+					unsigned int count __unused ) {	      \
-+	/* Do nothing */						      \
-+}
-+ARM_OUTX ( b, uint8_t );
-+ARM_OUTX ( w, uint16_t );
-+ARM_OUTX ( l, uint32_t );
-+
- /*
-  * Slow down I/O
-  *

SOURCES/0001-build-customize-configuration.patch

@@ -1,17 +1,8 @@
-From: Paolo Bonzini <pbonzini@redhat.com>
-Date: Tue, 17 Nov 2015 11:56:06 -0500
-Subject: [PATCH ipxe] build: customize configuration
-
-diff --git a/src/config/local/general.h b/src/config/local/general.h
-index 5814511..47d0e1a 100644
---- a/src/config/local/general.h
-+++ b/src/config/local/general.h
-@@ -0,0 +1,5 @@
-+#undef ROM_BANNER_TIMEOUT
-+#define ROM_BANNER_TIMEOUT     0
-+
+diff -rupN ipxe-20190125-git36a4c85f/src/config/local/general.h ipxe-20190125-git36a4c85f.new/src/config/local/general.h
+--- ipxe-20190125-git36a4c85f/src/config/local/general.h	1970-01-01 01:00:00.000000000 +0100
++++ ipxe-20190125-git36a4c85f.new/src/config/local/general.h	2019-02-01 16:40:42.725293033 +0000
+@@ -0,0 +1,4 @@
 +/* Enable IPv6. */
 +#define NET_PROTO_IPV6
--- 
-2.9.3
-
++/* Enable HTTPS */
++#define DOWNLOAD_PROTO_HTTPS

SOURCES/0001-efi-perform-cable-detection-at-NII-initialization-on-HPE-557SFP.patch

@@ -1,119 +0,0 @@
-From 2de005e9ac399f7064968a2611f266dc86a96700 Mon Sep 17 00:00:00 2001
-From: Laszlo Ersek <lersek@redhat.com>
-Date: Fri, 24 Jul 2020 19:15:28 +0200
-Subject: [PATCH] [efi] perform cable detection at NII initialization on HPE
- 557SFP+
-
-Commit c0b61bad99ba ("[efi] Work around bugs in Emulex NII driver",
-2015-08-17) added PXE_OPFLAGS_INITIALIZE_DETECT_CABLE to nii_open() for
-working around Emulex NII driver bugs.
-
-That broke some Mellanox drivers, so commit 6324227dcaa8 ("[efi] Skip
-cable detection at initialisation where possible", 2017-03-19) predicated
-PXE_OPFLAGS_INITIALIZE_DETECT_CABLE on the NII driver's *inability* to
-report link status.
-
-This in turn breaks the NII driver on (some?) HPE 557SFP+ cards, as those
-drivers are capable of reporting link status, but they still need cable
-detection.
-
-So check for this card (through PCI vendor / device / subsys vendor /
-subsys device identifiers), and opt for cable detection regardless of link
-status reporting.
-
-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1740827
-Signed-off-by: Laszlo Ersek <lersek@redhat.com>
----
- src/drivers/net/efi/nii.c | 43 ++++++++++++++++++++++++++++++++++++---
- 1 file changed, 40 insertions(+), 3 deletions(-)
-
-diff --git a/src/drivers/net/efi/nii.c b/src/drivers/net/efi/nii.c
-index 2d87e0c63f14..0cf065e0818f 100644
---- a/src/drivers/net/efi/nii.c
-+++ b/src/drivers/net/efi/nii.c
-@@ -193,6 +193,9 @@ struct nii_nic {
- 
- 	/** Mapping list */
- 	struct list_head mappings;
-+
-+	/** quirk needed for HPE 557SFP+ */
-+	int quirk_hpe557sfpp;
- };
- 
- /** Maximum number of received packets per poll */
-@@ -219,6 +222,7 @@ static int nii_pci_open ( struct nii_nic *nii ) {
- 	int bar;
- 	EFI_STATUS efirc;
- 	int rc;
-+	uint16_t vid, did, subsys_vid, subsys_did;
- 
- 	/* Locate PCI I/O protocol */
- 	if ( ( rc = efi_locate_device ( device, &efi_pci_io_protocol_guid,
-@@ -255,7 +259,7 @@ static int nii_pci_open ( struct nii_nic *nii ) {
- 			rc = -EEFI ( efirc );
- 			DBGC ( nii, "NII %s could not get BAR %d attributes: "
- 			       "%s\n", nii->dev.name, bar, strerror ( rc ) );
--			goto err_get_bar_attributes;
-+			goto err_pci;
- 		}
- 		if ( desc.acpi->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM ) {
- 			nii->mem_bar = bar;
-@@ -276,9 +280,36 @@ static int nii_pci_open ( struct nii_nic *nii ) {
- 		DBGC ( nii, "no I/O BAR\n" );
- 	}
- 
-+	/* Check if HPE 557SFP+ quirk is needed */
-+	if ( ( efirc = nii->pci_io->Pci.Read ( nii->pci_io,
-+					       EfiPciIoWidthUint16,
-+					       PCI_VENDOR_ID, 1,
-+					       &vid ) ) != 0 ||
-+	     ( efirc = nii->pci_io->Pci.Read ( nii->pci_io,
-+					       EfiPciIoWidthUint16,
-+					       PCI_DEVICE_ID, 1,
-+					       &did ) ) != 0 ||
-+	     ( efirc = nii->pci_io->Pci.Read ( nii->pci_io,
-+					       EfiPciIoWidthUint16,
-+					       PCI_SUBSYSTEM_VENDOR_ID, 1,
-+					       &subsys_vid ) ) != 0 ||
-+	     ( efirc = nii->pci_io->Pci.Read ( nii->pci_io,
-+					       EfiPciIoWidthUint16,
-+					       PCI_SUBSYSTEM_ID, 1,
-+					       &subsys_did ) ) != 0 ) {
-+		rc = -EEFI ( efirc );
-+		DBGC ( nii, "NII %s could not read PCI config space: %s\n",
-+		       nii->dev.name, strerror ( rc ) );
-+		goto err_pci;
-+	}
-+
-+	nii->quirk_hpe557sfpp = ( vid == 0x10df &&
-+				  did == 0x0720 &&
-+				  subsys_vid == 0x103c &&
-+				  subsys_did == 0x803f );
- 	return 0;
- 
-- err_get_bar_attributes:
-+ err_pci:
- 	bs->CloseProtocol ( pci_device, &efi_pci_io_protocol_guid,
- 			    efi_image_handle, device );
-  err_open:
-@@ -1144,8 +1175,14 @@ static int nii_open ( struct net_device *netdev ) {
- 	 * cable detection at this point if any only if the driver is
- 	 * not capable of reporting link status changes at runtime via
- 	 * PXE_OPCODE_GET_STATUS.
-+	 *
-+	 * HPE 557SFP+ seems to break with
-+	 * PXE_OPFLAGS_INITIALIZE_DO_NOT_DETECT_CABLE, but works with
-+	 * PXE_OPFLAGS_INITIALIZE_DETECT_CABLE, so ignore link status reporting
-+	 * for that NIC, and always request cable detection.
- 	 */
--	flags = ( nii->media ? PXE_OPFLAGS_INITIALIZE_DO_NOT_DETECT_CABLE
-+	flags = ( ( ! nii->quirk_hpe557sfpp ) && nii->media
-+		  ? PXE_OPFLAGS_INITIALIZE_DO_NOT_DETECT_CABLE
- 		  : PXE_OPFLAGS_INITIALIZE_DETECT_CABLE );
- 	if ( ( rc = nii_initialise_flags ( nii, flags ) ) != 0 )
- 		goto err_initialise;
-
-base-commit: b76052335788d0ad2c4b0bded116c3b02dd4bbc2
--- 
-2.19.1.3.g30247aa5d201
-

SOURCES/ipxe-Add-VLAN-tagging-support.patch

@@ -0,0 +1,34 @@
+From 2a9170ed88dc55d601a70d34f2d93157dc30e307 Mon Sep 17 00:00:00 2001
+From: Miroslav Rezanina <mrezanin@redhat.com>
+Date: Mon, 2 Aug 2021 08:33:47 -0400
+Subject: [PATCH 2/5] Add VLAN tagging support
+
+RH-Author: Miroslav Rezanina <mrezanin@redhat.com>
+RH-MergeRequest: 6: Forwardport  missing RHEL 8 downsteream changes
+RH-Commit: [2/5] 3359f0d96c8743abefdf1b81857c84f4e7312f9d (mrezanin/centos-src-ipxe)
+RH-Bugzilla: 1985658
+
+RHEL 8 added support for VLAN tagging. We need to add it to RHEL 9
+so we are not regressing.
+
+Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
+---
+ src/config/general.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/config/general.h b/src/config/general.h
+index 5adf6a35..a6df71b5 100644
+--- a/src/config/general.h
++++ b/src/config/general.h
+@@ -140,7 +140,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
+ //#define TIME_CMD		/* Time commands */
+ //#define DIGEST_CMD		/* Image crypto digest commands */
+ //#define LOTEST_CMD		/* Loopback testing commands */
+-//#define VLAN_CMD		/* VLAN commands */
++#define VLAN_CMD		/* VLAN commands */
+ //#define PXE_CMD		/* PXE commands */
+ //#define REBOOT_CMD		/* Reboot command */
+ //#define POWEROFF_CMD		/* Power off command */
+-- 
+2.27.0
+

SOURCES/ipxe-Add-ping-command-support.patch

@@ -0,0 +1,36 @@
+From 4d004e6a535c4f102c7b91c2f4d259cebaf1fb69 Mon Sep 17 00:00:00 2001
+From: Miroslav Rezanina <mrezanin@redhat.com>
+Date: Mon, 2 Aug 2021 08:11:12 -0400
+Subject: [PATCH 1/5] Add ping command support
+
+RH-Author: Miroslav Rezanina <mrezanin@redhat.com>
+RH-MergeRequest: 6: Forwardport  missing RHEL 8 downsteream changes
+RH-Commit: [1/5] f95713f55d7af7970d39462c94b866f833eedca1 (mrezanin/centos-src-ipxe)
+RH-Bugzilla: 1985658
+
+To allow trouble shooting ipxe issues, ping command were added to
+RHEL 8 (see BZ 1913719).
+
+Adding this command to RHEL 9 to prevent regression from RHEL 8 functionality.
+
+Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
+---
+ src/config/general.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/config/general.h b/src/config/general.h
+index 3c14a2cd..5adf6a35 100644
+--- a/src/config/general.h
++++ b/src/config/general.h
+@@ -148,7 +148,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
+ //#define PCI_CMD		/* PCI commands */
+ //#define PARAM_CMD		/* Form parameter commands */
+ //#define NEIGHBOUR_CMD		/* Neighbour management commands */
+-//#define PING_CMD		/* Ping command */
++#define PING_CMD		/* Ping command */
+ //#define CONSOLE_CMD		/* Console command */
+ //#define IPSTAT_CMD		/* IP statistics commands */
+ //#define PROFSTAT_CMD		/* Profiling commands */
+-- 
+2.27.0
+

SOURCES/ipxe-Disable-SHA-1.patch

@@ -0,0 +1,33 @@
+From e50ff50417dca26223b771d2a93cf57d4f627104 Mon Sep 17 00:00:00 2001
+From: Gerd Hoffmann <kraxel@redhat.com>
+Date: Thu, 22 Jul 2021 15:49:51 +0200
+Subject: [PATCH 1/4] Disable SHA-1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+RH-Author: Gerd Hoffmann <kraxel@redhat.com>
+RH-MergeRequest: 5: Disable SHA-1
+RH-Commit: [1/1] 23f1cca1f3ac86958088c41e0f8122dde74c72cf (kraxel/ipxe)
+RH-Bugzilla: 1935932
+RH-Acked-by: Daniel P. Berrangé <berrange@redhat.com>
+RH-Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
+
+Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
+Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
+---
+ src/config/local/crypto.h | 2 ++
+ 1 file changed, 2 insertions(+)
+ create mode 100644 src/config/local/crypto.h
+
+diff --git a/src/config/local/crypto.h b/src/config/local/crypto.h
+new file mode 100644
+index 00000000..ff4a5b7f
+--- /dev/null
++++ b/src/config/local/crypto.h
+@@ -0,0 +1,2 @@
++/** disable SHA-1 digest algorithm */
++#undef CRYPTO_DIGEST_SHA1
+-- 
+2.27.0
+

SOURCES/ipxe-netdevice-Strip-802.Q-VLAN-0-priority-tags.patch

@@ -1,16 +1,12 @@
-From 1a921ececb22bbc41d1fda34576564e84d124a83 Mon Sep 17 00:00:00 2001
-From: Ladi Prosek <lprosek@redhat.com>
-Date: Mon, 11 Jul 2016 14:17:36 +0200
-Subject: Strip 802.1Q VLAN 0 priority tags
+From ff3a5af3d7f78577899626b2f8b612369e051916 Mon Sep 17 00:00:00 2001
+From: Miroslav Rezanina <mrezanin@redhat.com>
+Date: Mon, 2 Aug 2021 08:32:33 -0400
+Subject: [PATCH 3/5] [netdevice] Strip 802.Q VLAN 0 priority tags
 
-RH-Author: Ladi Prosek <lprosek@redhat.com>
-Message-id: <1468246656-15560-1-git-send-email-lprosek@redhat.com>
-Patchwork-id: 71112
-O-Subject: [RHEL7.3 ipxe PATCH] [netdevice] Strip 802.Q VLAN 0 priority tags
-Bugzilla: 1316329
-RH-Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
-RH-Acked-by: Laszlo Ersek <lersek@redhat.com>
-RH-Acked-by: Xiao Wang <jasowang@redhat.com>
+RH-Author: Miroslav Rezanina <mrezanin@redhat.com>
+RH-MergeRequest: 6: Forwardport  missing RHEL 8 downsteream changes
+RH-Commit: [3/5] 440560659da2028f365a71b4ed4991955022dce5 (mrezanin/centos-src-ipxe)
+RH-Bugzilla: 1985658
 
 iPXE was unable to receive priority tagged packets specified in
 the 802.1Q standard and supported by all major networking stacks.
@@ -22,21 +18,24 @@ headers.
 Upstream patch:
 http://lists.ipxe.org/pipermail/ipxe-devel/2016-July/005099.html
 
-There is a difference between the upstream patch and this patch in the
-path prefix of "interface/pxe/pxe_undi.c" because we don't have upstream
-commit f468f12b1eca.
+Downstream changes:
+Upstream commit fe680c822856 made vlan_find static. This prevents
+it's usage int this patch. Reverting changes adding static for
+vlan_find.
 
 Signed-off-by: Ladi Prosek <lprosek@redhat.com>
 Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
 ---
- src/arch/x86/interface/pxe/pxe_undi.c |  6 +++++
- src/include/ipxe/netdevice.h          |  2 ++
- src/interface/efi/efi_snp.c           |  7 ++++++
- src/net/netdevice.c                   | 44 +++++++++++++++++++++++++++++++++++
- 4 files changed, 59 insertions(+)
+ src/arch/x86/interface/pxe/pxe_undi.c |  6 +++
+ src/include/ipxe/netdevice.h          |  2 +
+ src/include/ipxe/vlan.h               |  2 +
+ src/interface/efi/efi_snp.c           |  7 ++++
+ src/net/netdevice.c                   | 57 +++++++++++++++++++++++++++
+ src/net/vlan.c                        |  2 +-
+ 6 files changed, 75 insertions(+), 1 deletion(-)
 
 diff --git a/src/arch/x86/interface/pxe/pxe_undi.c b/src/arch/x86/interface/pxe/pxe_undi.c
-index 2eb6817..2ea1451 100644
+index 2eb68178..2ea14515 100644
 --- a/src/arch/x86/interface/pxe/pxe_undi.c
 +++ b/src/arch/x86/interface/pxe/pxe_undi.c
 @@ -976,6 +976,12 @@ static PXENV_EXIT_t pxenv_undi_isr ( struct s_PXENV_UNDI_ISR *undi_isr ) {
@@ -53,10 +52,10 @@ index 2eb6817..2ea1451 100644
  		switch ( net_proto ) {
  		case htons ( ETH_P_IP ):
 diff --git a/src/include/ipxe/netdevice.h b/src/include/ipxe/netdevice.h
-index a1d207f..cea87f7 100644
+index d498ab69..27dda45d 100644
 --- a/src/include/ipxe/netdevice.h
 +++ b/src/include/ipxe/netdevice.h
-@@ -719,6 +719,8 @@ extern int net_tx ( struct io_buffer *iobuf, struct net_device *netdev,
+@@ -726,6 +726,8 @@ extern int net_tx ( struct io_buffer *iobuf, struct net_device *netdev,
  extern int net_rx ( struct io_buffer *iobuf, struct net_device *netdev,
  		    uint16_t net_proto, const void *ll_dest,
  		    const void *ll_source, unsigned int flags );
@@ -65,11 +64,24 @@ index a1d207f..cea87f7 100644
  extern void net_poll ( void );
  extern struct net_device_configurator *
  find_netdev_configurator ( const char *name );
+diff --git a/src/include/ipxe/vlan.h b/src/include/ipxe/vlan.h
+index 7f93439b..b82f3806 100644
+--- a/src/include/ipxe/vlan.h
++++ b/src/include/ipxe/vlan.h
+@@ -61,6 +61,8 @@ struct vlan_header {
+  */
+ #define VLAN_PRIORITY_IS_VALID( priority ) ( (priority) <= 7 )
+ 
++extern struct net_device * vlan_find ( struct net_device *trunk,
++                                      unsigned int tag );
+ extern unsigned int vlan_tag ( struct net_device *netdev );
+ extern int vlan_can_be_trunk ( struct net_device *trunk );
+ extern int vlan_create ( struct net_device *trunk, unsigned int tag,
 diff --git a/src/interface/efi/efi_snp.c b/src/interface/efi/efi_snp.c
-index e6388bf..d1a1a44 100644
+index d648700f..a8f2ac8e 100644
 --- a/src/interface/efi/efi_snp.c
 +++ b/src/interface/efi/efi_snp.c
-@@ -745,6 +745,13 @@ efi_snp_receive ( EFI_SIMPLE_NETWORK_PROTOCOL *snp,
+@@ -813,6 +813,13 @@ efi_snp_receive ( EFI_SIMPLE_NETWORK_PROTOCOL *snp,
  		goto out_bad_ll_header;
  	}
  
@@ -84,13 +96,15 @@ index e6388bf..d1a1a44 100644
  	if ( ll_header_len )
  		*ll_header_len = ll_protocol->ll_header_len;
 diff --git a/src/net/netdevice.c b/src/net/netdevice.c
-index 9df2119..c53d5e3 100644
+index 3b02e64b..95803f26 100644
 --- a/src/net/netdevice.c
 +++ b/src/net/netdevice.c
-@@ -1028,6 +1028,44 @@ int net_rx ( struct io_buffer *iobuf, struct net_device *netdev,
+@@ -1043,6 +1043,45 @@ int net_rx ( struct io_buffer *iobuf, struct net_device *netdev,
+ 	return -ENOTSUP;
  }
  
- /**
++
++/**
 + * Strip extra link-layer-independent tags from a received packet
 + *
 + * @v iobuf		I/O buffer
@@ -128,11 +142,10 @@ index 9df2119..c53d5e3 100644
 +	return 0;
 +}
 +
-+/**
+ /**
   * Poll the network stack
   *
-  * This polls all interfaces for received packets, and processes
-@@ -1078,6 +1116,12 @@ void net_poll ( void ) {
+@@ -1094,6 +1133,12 @@ void net_poll ( void ) {
  				continue;
  			}
  
@@ -145,6 +158,38 @@ index 9df2119..c53d5e3 100644
  			/* Hand packet to network layer */
  			if ( ( rc = net_rx ( iob_disown ( iobuf ), netdev,
  					     net_proto, ll_dest,
+@@ -1125,6 +1170,18 @@ __weak unsigned int vlan_tag ( struct net_device *netdev __unused ) {
+ 	return 0;
+ }
+ 
++/**
++ * Identify VLAN device (when VLAN support is not present)
++ *
++ * @v netdev           Network device
++ * @v tag              VLAN tag, or zero
++ * @v iobuf            I/O buffer
++ */
++__weak struct net_device * vlan_find ( struct net_device *trunk __unused,
++                                      unsigned int tag __unused ) {
++       return NULL;
++}
++
+ /**
+  * Add VLAN tag-stripped packet to queue (when VLAN support is not present)
+  *
+diff --git a/src/net/vlan.c b/src/net/vlan.c
+index 90f2934d..0f234ea5 100644
+--- a/src/net/vlan.c
++++ b/src/net/vlan.c
+@@ -199,7 +199,7 @@ static void vlan_sync ( struct net_device *netdev ) {
+  * @v tag		VLAN tag
+  * @ret netdev		VLAN device, if any
+  */
+-static struct net_device * vlan_find ( struct net_device *trunk,
++struct net_device * vlan_find ( struct net_device *trunk,
+ 				       unsigned int tag ) {
+ 	struct net_device *netdev;
+ 	struct vlan_device *vlan;
 -- 
-1.8.3.1
+2.27.0
 

SOURCES/ipxe-ping-cmd.patch

@@ -1,11 +0,0 @@
---- ./src/config/general.h.orig	2021-01-26 19:47:08.940559209 -0500
-+++ ./src/config/general.h	2021-01-26 19:47:15.739526567 -0500
-@@ -148,7 +148,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
- //#define PCI_CMD		/* PCI commands */
- //#define PARAM_CMD		/* Form parameter commands */
- //#define NEIGHBOUR_CMD		/* Neighbour management commands */
--//#define PING_CMD		/* Ping command */
-+#define PING_CMD		/* Ping command */
- //#define CONSOLE_CMD		/* Console command */
- //#define IPSTAT_CMD		/* IP statistics commands */
- //#define PROFSTAT_CMD		/* Profiling commands */

SOURCES/ipxe-vlan-cmds.patch

@@ -1,12 +0,0 @@
-diff -up ./src/config/general.h.vlan ./src/config/general.h
---- ./src/config/general.h.vlan	2018-10-09 13:11:42.940904753 -0400
-+++ ./src/config/general.h	2018-10-09 13:12:03.258821711 -0400
-@@ -140,7 +140,7 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
- //#define TIME_CMD		/* Time commands */
- //#define DIGEST_CMD		/* Image crypto digest commands */
- //#define LOTEST_CMD		/* Loopback testing commands */
--//#define VLAN_CMD		/* VLAN commands */
-+#define VLAN_CMD		/* VLAN commands */
- //#define PXE_CMD		/* PXE commands */
- //#define REBOOT_CMD		/* Reboot command */
- //#define POWEROFF_CMD		/* Power off command */

SPECS/ipxe.spec

@@ -1,17 +1,18 @@
-# Resulting binary formats we want from iPXE
-%global formats rom
+# ROMS we want for QEMU with format PCIID:QEMUNAME
+%global qemuroms \\\
+  8086100e:e1000 \\\
+  10ec8139:rtl8139 \\\
+  1af41000:virtio \\\
+  808610d3:e1000e
 
-# PCI IDs (vendor,product) of the ROMS we want for QEMU
-#
-#    pcnet32: 0x1022 0x2000
-#   ne2k_pci: 0x10ec 0x8029
-#      e1000: 0x8086 0x100e
-#    rtl8139: 0x10ec 0x8139
-# virtio-net: 0x1af4 0x1000
-#   eepro100: 0x8086 0x1209
-#     e1000e: 0x8086 0x10d3
-#    vmxnet3: 0x15ad 0x07b0
-%global qemuroms 10222000 10ec8029 8086100e 10ec8139 1af41000 80861209 808610d3 15ad07b0
+%if 0%{?fedora}
+# Fedora specific roms
+%global qemuroms %{qemuroms} \\\
+  10222000:pcnet \\\
+  10ec8029:ne2k_pci \\\
+  80861209:eepro100 \\\
+  15ad07b0:vmxnet3
+%endif
 
 # We only build the ROMs if on an EFI build host. The resulting
 # binary RPM will be noarch, so other archs will still be able
@@ -33,15 +34,14 @@
 #
 # And then change these two:
 
-%global hash 133f4c47
-%global date 20181214
+%global hash 4bd064de
+%global date 20200823
 
 Name:    ipxe
 Version: %{date}
-Release: 11.git%{hash}%{?dist}
+Release: 9.git%{hash}%{?dist}
 Summary: A network boot loader
 
-Group:   System Environment/Base
 License: GPLv2 with additional permissions and BSD
 URL:     http://ipxe.org/
 
@@ -52,57 +52,53 @@ Source1: script.ipxe
 # Sent upstream: http://lists.ipxe.org/pipermail/ipxe-devel/2015-November/004494.html
 Patch0001: 0001-build-customize-configuration.patch
 Patch0002: 0002-Use-spec-compliant-timeouts.patch
-Patch0003: 0003-Strip-802.1Q-VLAN-0-priority-tags.patch
-Patch0004: ipxe-vlan-cmds.patch
-Patch0005: 0001-efi-perform-cable-detection-at-NII-initialization-on-HPE-557SFP.patch
-Patch0006: ipxe-ping-cmd.patch
-Patch0007: 0001-arm-Provide-dummy-implementation-for-in-out-s-b-w-l.patch
+# For bz#1935932 - ipxe implements and/or uses the deprecated SHA-1 algorithm by default (
+Patch3: ipxe-Disable-SHA-1.patch
+# For bz#1985658 - carry forward rhel8 ipxe packaging changes
+Patch4: ipxe-Add-ping-command-support.patch
+# For bz#1985658 - carry forward rhel8 ipxe packaging changes
+Patch5: ipxe-Add-VLAN-tagging-support.patch
+# For bz#1985658 - carry forward rhel8 ipxe packaging changes
+Patch6: ipxe-netdevice-Strip-802.Q-VLAN-0-priority-tags.patch
+
+# Source-git patches
 
 %ifarch %{buildarches}
 BuildRequires: perl-interpreter
 BuildRequires: perl-Getopt-Long
-BuildRequires: mtools
-BuildRequires: mkisofs
-BuildRequires: edk2-tools
-BuildRequires: xz-devel
-BuildRequires: binutils-devel
+%if 0%{?fedora} >= 33 || 0%{?rhel} >= 9
+BuildRequires: perl-FindBin
+BuildRequires: perl-lib
 %endif
 %ifarch x86_64
 BuildRequires: syslinux
 %endif
+BuildRequires: mtools
+BuildRequires: xorriso
+BuildRequires: edk2-tools
+BuildRequires: xz-devel
+BuildRequires: gcc
+
+BuildRequires: binutils-devel
+BuildRequires: make
 
 Obsoletes: gpxe <= 1.0.1
 
 %ifarch x86_64
 %package rhcert
 Summary: Redhat hwcert custom ipxe image
-Group: Development/Tools
 BuildArch: noarch
 
-%package bootimgs-x86
-Summary: X86 Network boot loader images in bootable USB, CD, floppy and GRUB formats
-Group:   Development/Tools
-BuildArch: noarch
-Provides: %{name}-bootimgs = %{version}-%{release}
-Obsoletes: %{name}-bootimgs < 20181214-9.git133f4c47
-Obsoletes: gpxe-bootimgs <= 1.0.1
-
-%package roms
-Summary: Network boot loader roms in .rom format
-Group:  Development/Tools
-Requires: %{name}-roms-qemu = %{version}-%{release}
-BuildArch: noarch
-Obsoletes: gpxe-roms <= 1.0.1
-
-%package roms-qemu
-Summary: Network boot loader roms supported by QEMU, .rom format
-Group:  Development/Tools
-BuildArch: noarch
-Obsoletes: gpxe-roms-qemu <= 1.0.1
-
 %description rhcert
 Custom ipxe image for use in hardware certification and validation
 
+%package bootimgs-x86
+Summary: X86 Network boot loader images in bootable USB, CD, floppy and GRUB formats
+BuildArch: noarch
+Provides: %{name}-bootimgs = %{version}-%{release}
+Obsoletes: %{name}-bootimgs < %{version}-%{release}
+Obsoletes: gpxe-bootimgs <= 1.0.1
+
 %description bootimgs-x86
 iPXE is an open source network bootloader. It provides a direct
 replacement for proprietary PXE ROMs, with many extra features such as
@@ -110,6 +106,32 @@ DNS, HTTP, iSCSI, etc.
 
 This package contains the iPXE boot images in USB, CD, floppy, and PXE
 UNDI formats.
+%endif
+
+%ifarch aarch64
+%package bootimgs-aarch64
+Summary: AArch64 Network boot loader images in bootable USB and GRUB formats
+Group:   Development/Tools
+BuildArch: noarch
+
+%description bootimgs-aarch64
+iPXE is an open source network bootloader. It provides a direct
+replacement for proprietary PXE ROMs, with many extra features such as
+DNS, HTTP, iSCSI, etc.
+
+This package contains the iPXE ARM64 boot images in USB and GRUB formats.
+%endif
+
+%package roms
+Summary: Network boot loader roms in .rom format
+Requires: %{name}-roms-qemu = %{version}-%{release}
+BuildArch: noarch
+Obsoletes: gpxe-roms <= 1.0.1
+
+%package roms-qemu
+Summary: Network boot loader roms supported by QEMU, .rom format
+BuildArch: noarch
+Obsoletes: gpxe-roms-qemu <= 1.0.1
 
 %description roms
 iPXE is an open source network bootloader. It provides a direct
@@ -127,20 +149,6 @@ This package contains the iPXE ROMs for devices emulated by QEMU, in
 .rom format.
 %endif
 
-%ifarch aarch64
-%package bootimgs-aarch64
-Summary: AArch64 Network boot loader images in bootable USB and GRUB formats
-Group:   Development/Tools
-BuildArch: noarch
-
-%description bootimgs-aarch64
-iPXE is an open source network bootloader. It provides a direct
-replacement for proprietary PXE ROMs, with many extra features such as
-DNS, HTTP, iSCSI, etc.
-
-This package contains the iPXE ARM64 boot images in USB and GRUB formats.
-%endif
-
 %description
 iPXE is an open source network bootloader. It provides a direct
 replacement for proprietary PXE ROMs, with many extra features such as
@@ -149,6 +157,7 @@ DNS, HTTP, iSCSI, etc.
 %prep
 %setup -q -n %{name}-%{version}-git%{hash}
 %autopatch -p1
+
 pushd src
 # ath9k drivers are too big for an Option ROM, and ipxe devs say it doesn't
 # make sense anyways
@@ -183,7 +192,9 @@ make_ipxe ISOLINUX_BIN=/usr/share/syslinux/isolinux.bin \
 
 # build roms with efi support for qemu
 mkdir bin-combined
-for rom in %{qemuroms}; do
+for romstr in %{qemuroms}; do
+  rom=$(echo "$romstr" | cut -d ":" -f 1)
+
   make_ipxe CONFIG=qemu bin/${rom}.rom
   make_ipxe CONFIG=qemu bin-x86_64-efi/${rom}.efidrv
   vid="0x${rom%%????}"
@@ -219,35 +230,41 @@ pushd src/bin/
 
 cp -a undionly.kpxe ipxe.{iso,usb,dsk,lkrn} %{buildroot}/%{_datadir}/%{name}/
 
-for fmt in %{formats};do
- for img in *.${fmt};do
-      if [ -e $img ]; then
-   cp -a $img %{buildroot}/%{_datadir}/%{name}/
-   echo %{_datadir}/%{name}/$img >> ../../${fmt}.list
+for img in *.rom; do
+  if [ -e $img ]; then
+    cp -a $img %{buildroot}/%{_datadir}/%{name}/
+    echo %{_datadir}/%{name}/$img >> ../../rom.list
   fi
- done
 done
 popd
 
 cp -a src/bin-i386-efi/ipxe.efi %{buildroot}/%{_datadir}/%{name}/ipxe-i386.efi
 cp -a src/bin-x86_64-efi/ipxe.efi %{buildroot}/%{_datadir}/%{name}/ipxe-x86_64.efi
-cp -a src/bin-x86_64-efi/ipxe-rhcert.efi %{buildroot}/%{_datadir}/%{name}/ipxe-x86_64-rhcert.efi
 cp -a src/bin-x86_64-efi/snponly.efi %{buildroot}/%{_datadir}/%{name}/ipxe-snponly-x86_64.efi
+cp -a src/bin-x86_64-efi/ipxe-rhcert.efi %{buildroot}/%{_datadir}/%{name}/ipxe-x86_64-rhcert.efi
+
+mkdir -p %{buildroot}%{_datadir}/%{name}/qemu/
+
+for romstr in %{qemuroms}; do
+  # the roms supported by qemu will be packaged separatedly
+  # remove from the main rom list and add them to qemu.list
+  rom=$(echo "$romstr" | cut -d ":" -f 1)
+  qemuname=$(echo "$romstr" | cut -d ":" -f 2)
+  sed -i -e "/\/${rom}.rom/d" rom.list
+  echo %{_datadir}/%{name}/${rom}.rom >> qemu.rom.list
 
-# the roms supported by qemu will be packaged separatedly
-# remove from the main rom list and add them to qemu.list
-for fmt in rom ;do
- for rom in %{qemuroms} ; do
-  sed -i -e "/\/${rom}.${fmt}/d" ${fmt}.list
-  echo %{_datadir}/%{name}/${rom}.${fmt} >> qemu.${fmt}.list
- done
-done
-for rom in %{qemuroms}; do
   cp src/bin-combined/${rom}.rom %{buildroot}/%{_datadir}/%{name}.efi/
   echo %{_datadir}/%{name}.efi/${rom}.rom >> qemu.rom.list
+
+  # Set up symlinks with expected qemu firmware names
+  ln -s ../../ipxe/${rom}.rom %{buildroot}%{_datadir}/%{name}/qemu/pxe-${qemuname}.rom
+  ln -s ../../ipxe.efi/${rom}.rom %{buildroot}%{_datadir}/%{name}/qemu/efi-${qemuname}.rom
 done
+
+# endif x86_64
 %endif
 
+
 %ifarch aarch64
 mkdir -p %{buildroot}/%{_datadir}/%{name}/arm64-efi
 cp -a src/bin-arm64-efi/snponly.efi %{buildroot}/%{_datadir}/%{name}/arm64-efi/snponly.efi
@@ -276,6 +293,7 @@ cp -a src/bin-arm64-efi/ipxe.efi %{buildroot}/%{_datadir}/%{name}/arm64-efi/ipxe
 %files roms-qemu -f qemu.rom.list
 %dir %{_datadir}/%{name}
 %dir %{_datadir}/%{name}.efi
+%{_datadir}/%{name}/qemu
 %doc COPYING COPYING.GPLv2 COPYING.UBDL
 
 %files rhcert
@@ -294,46 +312,92 @@ cp -a src/bin-arm64-efi/ipxe.efi %{buildroot}/%{_datadir}/%{name}/arm64-efi/ipxe
 %endif
 
 %changelog
-* Thu Sep 29 2022 Jarod Wilson <jarod@redhat.com> - 20181214-11.git133f4c47
-- Revert LACP flood issue fix due to regressions is causes elsewhere
+* Tue Apr 05 2022 Jarod Wilson <jarod@redhat.com> - 20200823-9.git4bd064de
+- Fix Obsoletes: and changelog versioning
 
-* Wed Jul 27 2022 Jarod Wilson <jarod@redhat.com> - 20181214-10.git133f4c47
-- Fix LACP flood issue in ipxe-bootimgs (bz 2098761)
+* Thu Mar 31 2022 Jarod Wilson <jarod@redhat.com> - 20200823-8.git4bd064de
+- Add ARM 64 EFI artifacts [yselkowi] (bz 2059349)
 
-* Tue Mar 01 2022 Yaakov Selkowitz <yselkowi@redhat.com> - 20181214-9.git133f4c47
-- Add ARM 64 EFI artifacts (bz 2059350)
+* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 20200823-7.git4bd064de
+- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
+  Related: rhbz#1991688
 
-* Fri Feb 19 2021 Jarod Wilson <jarod@redhat.com> - 20181210-8.git133f4c47
-- combine BIOS and EFI roms using utils/catrom.pl [lersek] (bz 1926561)
+* Sat Aug 07 2021 Miroslav Rezanina <mrezanin@redhat.com> - 20200823-6.git4bd064de
+- ipxe-Add-ping-command-support.patch [bz#1985658]
+- ipxe-Add-VLAN-tagging-support.patch [bz#1985658]
+- ipxe-netdevice-Strip-802.Q-VLAN-0-priority-tags.patch [bz#1985658]
+- ipxe-Provide-snponly.efi-rom.patch [bz#1985658]
+- ipxe-Build-hwcert-subpackage.patch [bz#1985658]
+- Resolves: bz#1985658
+  (carry forward rhel8 ipxe packaging changes)
 
-* Tue Jan 26 2021 Jarod Wilson <jarod@redhat.com> - 20181210-7.git133f4c47
-- Build ping command (bz 1913719)
+* Mon Jul 26 2021 Miroslav Rezanina <mrezanin@redhat.com> - 20200823-5.git4bd064de
+- ipxe-Disable-SHA-1.patch [bz#1935932]
+- ipxe-Replace-genisoimage-with-xorriso.patch [bz#1971981]
+- ipxe-spec-Drop-disabled-efi-ia32-build-infrastructure.patch [bz#1980138]
+- ipxe-spec-Generate-qemu-compatible-rom-filenames.patch [bz#1980138]
+- Resolves: bz#1935932
+  (ipxe implements and/or uses the deprecated SHA-1 algorithm by default ()
+- Resolves: bz#1971981
+  (Please replace genisoimage with xorriso)
+- Resolves: bz#1980138
+  (install qemu rom symlinks so qemu doesn't have to)
 
-* Mon Jul 27 2020 Neil Horman <nhorman@redhat.com> - 20181210-6.git133f4c47
-- Add quirk for link detect on HP 557SFP cards (bz 1740827)
+* Tue Jun 08 2021 Miroslav Rezanina <mrezanin@redhat.com> - 20200823-4.git4bd064de
+- ipxe-Skip-some-QEMU-ROMs-when-building-for-RHEL.patch [bz#1956931]
+- ipxe-spec-combine-BIOS-and-EFI-roms-using-util-catrom.pl.patch [bz#1957246]
+- Resolves: bz#1956931
+  (ipxe-roms-qemu list: Clean out old ROMs)
+- Resolves: bz#1957246
+  (boot vm from pxe failed)
 
-* Tue Jan 7 2020 Neil Horman <nhorman@redhat.com> - 20181210-5.git133f4c47
-- Add rhcert subpackage (bz 1756012)
+* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 20200823-3.git4bd064de
+- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
 
-* Fri Dec 13 2019 Neil Horman <nhorman@redhat.com> - 20181210-4.git133f4c47
-- Add snponly.efi image (bz 1776929)
+* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 20200823-2.git4bd064de
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
 
-* Tue Aug 13 2019 Danilo de Paula <ddepaula@redhat.com> - 20181210-3.git133f4c47
-- Release bump
+* Tue Sep 15 2020 Cole Robinson <aintdiscole@gmail.com> - 20200823-1.git4bd064de.git
+- Update to newer git snapshot, synced with qemu.git
+- Re-enable HTTPS support, with edk2 fix included (bz 1820836)
 
-* Thu Jul 25 2019 Danilo de Paula <ddepaula@redhat.com> - 20181210-2.git133f4c47
-- Resolves rhbz#1723702
-  (virtio rom near 256k boundary)
+* Fri Sep 04 2020 Merlin Mathesius <mmathesi@redhat.com> - 20190125-9.git36a4c85f
+- Workaound fatal GCC 9 compilation/link errors
+- Fix conditionals for perl BuildRequires
 
-* Fri Dec 14 2018 Neil Horman <nhorman@redhat.com> - 20181210-1.git133f4c47
-- Update to latest upstream
-- Add vlan cmds
+* Mon Aug 17 2020 Cole Robinson <aintdiscole@gmail.com> - 20190125-8.git36a4c85f
+- Revert HTTPS support, causes boot hangs with UEFI (bz 1869102)
 
-* Fri Nov 16 2018 Danilo C. L. de Paula <ddepaula@redhat.com> - 20170710-6.git0600d3ae
-- rebuilt
+* Tue Aug 11 2020 Cole Robinson <aintdiscole@gmail.com> - 20190125-7.git36a4c85f
+- Enable HTTPS support (bug 1820836)
 
-* Thu Jul 12 2018 Danilo - 20170710-5.git0600d3ae
-- Bumping release number and rebuilding ipxe for RHEL-8.0
+* Wed Jul 29 2020 Richard W.M. Jones <rjones@redhat.com> - 20190125-6.git36a4c85f
+- Explicitly BR perl-FindBin and perl-lib.
+
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 20190125-5.git36a4c85f
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Wed Jan 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 20190125-4.git36a4c85f
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 20190125-3.git36a4c85f
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Tue Jul 16 2019 Paolo Bonzini <pbonxini@redhat.com> - 20190125-2.git36a4c85f
+- Allow removing IA32 EFI images from combined oproms
+- Check that the ROMs fit in 256K and pad them
+
+* Tue Feb 12 2019 Daniel P. Berrangé <berrange@redhat.com> - 20190125-1.git36a4c85f
+- Update to latest git snapshot
+
+* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 20170710-6.git0600d3ae
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Mon Jul 23 2018 Daniel P. Berrangé <berrange@redhat.com> - 20170710-5.git0600d3ae
+- mkisofs tool moved to genisoimage RPM
+
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 20170710-4.git0600d3ae
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
 
 * Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 20170710-3.git0600d3ae
 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild