ipmitool/SOURCES/0023-move-static-objects-to-source-file.patch

233 lines
5.5 KiB
Diff
Raw Normal View History

From 3e0ecc5edcccc85654784d0888dbeb2f116204e0 Mon Sep 17 00:00:00 2001
From: Patrick Venture <venture@google.com>
Date: Thu, 22 Nov 2018 15:40:24 -0800
Subject: [PATCH] move static objects to source file
Move static objects declared in headers to the source files where
they're used.
Partially resolves ipmitool/ipmitool#13
Signed-off-by: Patrick Venture <venture@google.com>
---
include/ipmitool/ipmi_sdr.h | 43 -----------
lib/ipmi_sdr.c | 146 ++++++++++++++++++++++++++++++++++++
2 files changed, 146 insertions(+), 43 deletions(-)
diff --git a/include/ipmitool/ipmi_sdr.h b/include/ipmitool/ipmi_sdr.h
index 9001e59..5e6afd3 100644
--- a/include/ipmitool/ipmi_sdr.h
+++ b/include/ipmitool/ipmi_sdr.h
@@ -773,50 +773,7 @@ struct sdr_record_list {
#pragma pack(0)
#endif
-
-/* unit description codes (IPMI v1.5 section 37.16) */
-#define UNIT_MAX 0x90
-static const char *unit_desc[] __attribute__ ((unused)) = {
-"unspecified",
- "degrees C", "degrees F", "degrees K",
- "Volts", "Amps", "Watts", "Joules",
- "Coulombs", "VA", "Nits",
- "lumen", "lux", "Candela",
- "kPa", "PSI", "Newton",
- "CFM", "RPM", "Hz",
- "microsecond", "millisecond", "second", "minute", "hour",
- "day", "week", "mil", "inches", "feet", "cu in", "cu feet",
- "mm", "cm", "m", "cu cm", "cu m", "liters", "fluid ounce",
- "radians", "steradians", "revolutions", "cycles",
- "gravities", "ounce", "pound", "ft-lb", "oz-in", "gauss",
- "gilberts", "henry", "millihenry", "farad", "microfarad",
- "ohms", "siemens", "mole", "becquerel", "PPM", "reserved",
- "Decibels", "DbA", "DbC", "gray", "sievert",
- "color temp deg K", "bit", "kilobit", "megabit", "gigabit",
- "byte", "kilobyte", "megabyte", "gigabyte", "word", "dword",
- "qword", "line", "hit", "miss", "retry", "reset",
- "overflow", "underrun", "collision", "packets", "messages",
- "characters", "error", "correctable error", "uncorrectable error",};
-
-/* sensor type codes (IPMI v1.5 table 36.3)
- / Updated to v2.0 Table 42-3, Sensor Type Codes */
#define SENSOR_TYPE_MAX 0x2C
-static const char *sensor_type_desc[] __attribute__ ((unused)) = {
-"reserved",
- "Temperature", "Voltage", "Current", "Fan",
- "Physical Security", "Platform Security", "Processor",
- "Power Supply", "Power Unit", "Cooling Device", "Other",
- "Memory", "Drive Slot / Bay", "POST Memory Resize",
- "System Firmwares", "Event Logging Disabled", "Watchdog1",
- "System Event", "Critical Interrupt", "Button",
- "Module / Board", "Microcontroller", "Add-in Card",
- "Chassis", "Chip Set", "Other FRU", "Cable / Interconnect",
- "Terminator", "System Boot Initiated", "Boot Error",
- "OS Boot", "OS Critical Stop", "Slot / Connector",
- "System ACPI Power State", "Watchdog2", "Platform Alert",
- "Entity Presence", "Monitor ASIC", "LAN",
- "Management Subsys Health", "Battery", "Session Audit",
- "Version Change", "FRU State" };
struct sensor_reading {
char s_id[33]; /* name of the sensor */
diff --git a/lib/ipmi_sdr.c b/lib/ipmi_sdr.c
index d51c174..eb40b36 100644
--- a/lib/ipmi_sdr.c
+++ b/lib/ipmi_sdr.c
@@ -68,6 +68,152 @@ static struct sdr_record_list *sdr_list_head = NULL;
static struct sdr_record_list *sdr_list_tail = NULL;
static struct ipmi_sdr_iterator *sdr_list_itr = NULL;
+/* unit description codes (IPMI v1.5 section 37.16) */
+#define UNIT_MAX 0x90
+static const char *unit_desc[] = {
+ "unspecified",
+ "degrees C",
+ "degrees F",
+ "degrees K",
+ "Volts",
+ "Amps",
+ "Watts",
+ "Joules",
+ "Coulombs",
+ "VA",
+ "Nits",
+ "lumen",
+ "lux",
+ "Candela",
+ "kPa",
+ "PSI",
+ "Newton",
+ "CFM",
+ "RPM",
+ "Hz",
+ "microsecond",
+ "millisecond",
+ "second",
+ "minute",
+ "hour",
+ "day",
+ "week",
+ "mil",
+ "inches",
+ "feet",
+ "cu in",
+ "cu feet",
+ "mm",
+ "cm",
+ "m",
+ "cu cm",
+ "cu m",
+ "liters",
+ "fluid ounce",
+ "radians",
+ "steradians",
+ "revolutions",
+ "cycles",
+ "gravities",
+ "ounce",
+ "pound",
+ "ft-lb",
+ "oz-in",
+ "gauss",
+ "gilberts",
+ "henry",
+ "millihenry",
+ "farad",
+ "microfarad",
+ "ohms",
+ "siemens",
+ "mole",
+ "becquerel",
+ "PPM",
+ "reserved",
+ "Decibels",
+ "DbA",
+ "DbC",
+ "gray",
+ "sievert",
+ "color temp deg K",
+ "bit",
+ "kilobit",
+ "megabit",
+ "gigabit",
+ "byte",
+ "kilobyte",
+ "megabyte",
+ "gigabyte",
+ "word",
+ "dword",
+ "qword",
+ "line",
+ "hit",
+ "miss",
+ "retry",
+ "reset",
+ "overflow",
+ "underrun",
+ "collision",
+ "packets",
+ "messages",
+ "characters",
+ "error",
+ "correctable error",
+ "uncorrectable error"
+};
+
+/* sensor type codes (IPMI v1.5 table 36.3)
+ / Updated to v2.0 Table 42-3, Sensor Type Codes */
+static const char *sensor_type_desc[] = {
+ "reserved",
+ "Temperature",
+ "Voltage",
+ "Current",
+ "Fan",
+ "Physical Security",
+ "Platform Security",
+ "Processor",
+ "Power Supply",
+ "Power Unit",
+ "Cooling Device",
+ "Other",
+ "Memory",
+ "Drive Slot / Bay",
+ "POST Memory Resize",
+ "System Firmwares",
+ "Event Logging Disabled",
+ "Watchdog1",
+ "System Event",
+ "Critical Interrupt",
+ "Button",
+ "Module / Board",
+ "Microcontroller",
+ "Add-in Card",
+ "Chassis",
+ "Chip Set",
+ "Other FRU",
+ "Cable / Interconnect",
+ "Terminator",
+ "System Boot Initiated",
+ "Boot Error",
+ "OS Boot",
+ "OS Critical Stop",
+ "Slot / Connector",
+ "System ACPI Power State",
+ "Watchdog2",
+ "Platform Alert",
+ "Entity Presence",
+ "Monitor ASIC",
+ "LAN",
+ "Management Subsys Health",
+ "Battery",
+ "Session Audit",
+ "Version Change",
+ "FRU State"
+};
+
void printf_sdr_usage();
/* From src/plugins/ipmi_intf.c: */
--
2.40.1