.gitignore

@@ -0,0 +1,9 @@
+/hv_get_dhcp_info.sh
+/hv_get_dns_info.sh
+/hv_kvp_daemon.c
+/hv_set_ifconfig.sh
+/hv_vss_daemon.c
+/COPYING
+/hv_fcopy_daemon.c
+/lsvmbus
+/bondvf.sh

0002-Do-not-set-NM_CONTROLLED-no.patch

@@ -0,0 +1,24 @@
+From 88be69d62a01b9ac233de7f68118c948623c6f0a Mon Sep 17 00:00:00 2001
+From: Miroslav Rezanina <mrezanin@redhat.com>
+Date: Thu, 14 Nov 2019 09:45:44 +0100
+Subject: Do not set NM_CONTROLLED=no
+
+---
+ hv_set_ifconfig.sh | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/hv_set_ifconfig.sh b/hv_set_ifconfig.sh
+index 7ed9f85..18b27cc 100644
+--- a/hv_set_ifconfig.sh
++++ b/hv_set_ifconfig.sh
+@@ -51,7 +51,6 @@
+ 
+ 
+ echo "IPV6INIT=yes" >> $1
+-echo "NM_CONTROLLED=no" >> $1
+ echo "PEERDNS=yes" >> $1
+ echo "ONBOOT=yes" >> $1
+ 
+-- 
+2.27.0
+

0004-Update-C-files-and-scripts-to-kernel-version-5.7-rc1.patch

@@ -0,0 +1,345 @@
+From f20c2a3298ceae7536c06bd08a5c571ebfa8cce4 Mon Sep 17 00:00:00 2001
+From: Miroslav Rezanina <mrezanin@redhat.com>
+Date: Thu, 6 May 2021 12:50:43 +0200
+Subject: Update C files and scripts to kernel version 5.7-rc1
+
+(cherry-picked from RHEL 8.4.0 commit b0a20fac0e74b0b3eecc20ffe74006e7877da352)
+Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
+---
+ hv_fcopy_daemon.c   | 37 +++++++++++++++++++++++++++++++-----
+ hv_get_dhcp_info.sh |  2 +-
+ hv_kvp_daemon.c     | 35 ++++++++++++++++++++--------------
+ hv_set_ifconfig.sh  |  2 +-
+ hv_vss_daemon.c     | 46 ++++++++++++++++++++++++++++++++++-----------
+ 5 files changed, 90 insertions(+), 32 deletions(-)
+
+diff --git a/hv_fcopy_daemon.c b/hv_fcopy_daemon.c
+index aea2d91..16d629b 100644
+--- a/hv_fcopy_daemon.c
++++ b/hv_fcopy_daemon.c
+@@ -80,6 +80,8 @@ static int hv_start_fcopy(struct hv_start_fcopy *smsg)
+ 
+ 	error = 0;
+ done:
++	if (error)
++		target_fname[0] = '\0';
+ 	return error;
+ }
+ 
+@@ -108,15 +110,29 @@ static int hv_copy_data(struct hv_do_fcopy *cpmsg)
+ 	return ret;
+ }
+ 
++/*
++ * Reset target_fname to "" in the two below functions for hibernation: if
++ * the fcopy operation is aborted by hibernation, the daemon should remove the
++ * partially-copied file; to achieve this, the hv_utils driver always fakes a
++ * CANCEL_FCOPY message upon suspend, and later when the VM resumes back,
++ * the daemon calls hv_copy_cancel() to remove the file; if a file is copied
++ * successfully before suspend, hv_copy_finished() must reset target_fname to
++ * avoid that the file can be incorrectly removed upon resume, since the faked
++ * CANCEL_FCOPY message is spurious in this case.
++ */
+ static int hv_copy_finished(void)
+ {
+ 	close(target_fd);
++	target_fname[0] = '\0';
+ 	return 0;
+ }
+ static int hv_copy_cancel(void)
+ {
+ 	close(target_fd);
+-	unlink(target_fname);
++	if (strlen(target_fname) > 0) {
++		unlink(target_fname);
++		target_fname[0] = '\0';
++	}
+ 	return 0;
+ 
+ }
+@@ -131,7 +147,7 @@ void print_usage(char *argv[])
+ 
+ int main(int argc, char *argv[])
+ {
+-	int fcopy_fd;
++	int fcopy_fd = -1;
+ 	int error;
+ 	int daemonize = 1, long_index = 0, opt;
+ 	int version = FCOPY_CURRENT_VERSION;
+@@ -141,7 +157,7 @@ int main(int argc, char *argv[])
+ 		struct hv_do_fcopy copy;
+ 		__u32 kernel_modver;
+ 	} buffer = { };
+-	int in_handshake = 1;
++	int in_handshake;
+ 
+ 	static struct option long_options[] = {
+ 		{"help",	no_argument,	   0,  'h' },
+@@ -170,6 +186,12 @@ int main(int argc, char *argv[])
+ 	openlog("HV_FCOPY", 0, LOG_USER);
+ 	syslog(LOG_INFO, "starting; pid is:%d", getpid());
+ 
++reopen_fcopy_fd:
++	if (fcopy_fd != -1)
++		close(fcopy_fd);
++	/* Remove any possible partially-copied file on error */
++	hv_copy_cancel();
++	in_handshake = 1;
+ 	fcopy_fd = open("/dev/vmbus/hv_fcopy", O_RDWR);
+ 
+ 	if (fcopy_fd < 0) {
+@@ -196,7 +218,7 @@ int main(int argc, char *argv[])
+ 		len = pread(fcopy_fd, &buffer, sizeof(buffer), 0);
+ 		if (len < 0) {
+ 			syslog(LOG_ERR, "pread failed: %s", strerror(errno));
+-			exit(EXIT_FAILURE);
++			goto reopen_fcopy_fd;
+ 		}
+ 
+ 		if (in_handshake) {
+@@ -231,9 +253,14 @@ int main(int argc, char *argv[])
+ 
+ 		}
+ 
++		/*
++		 * pwrite() may return an error due to the faked CANCEL_FCOPY
++		 * message upon hibernation. Ignore the error by resetting the
++		 * dev file, i.e. closing and re-opening it.
++		 */
+ 		if (pwrite(fcopy_fd, &error, sizeof(int), 0) != sizeof(int)) {
+ 			syslog(LOG_ERR, "pwrite failed: %s", strerror(errno));
+-			exit(EXIT_FAILURE);
++			goto reopen_fcopy_fd;
+ 		}
+ 	}
+ }
+diff --git a/hv_get_dhcp_info.sh b/hv_get_dhcp_info.sh
+index c38686c..2f2a3c7 100644
+--- a/hv_get_dhcp_info.sh
++++ b/hv_get_dhcp_info.sh
+@@ -13,7 +13,7 @@
+ #	the script prints the string "Disabled" to stdout.
+ #
+ # Each Distro is expected to implement this script in a distro specific
+-# fashion. For instance on Distros that ship with Network Manager enabled,
++# fashion. For instance, on Distros that ship with Network Manager enabled,
+ # this script can be based on the Network Manager APIs for retrieving DHCP
+ # information.
+ 
+diff --git a/hv_kvp_daemon.c b/hv_kvp_daemon.c
+index e9ef4ca..0e5f14a 100644
+--- a/hv_kvp_daemon.c
++++ b/hv_kvp_daemon.c
+@@ -76,7 +76,7 @@ enum {
+ 	DNS
+ };
+ 
+-static int in_hand_shake = 1;
++static int in_hand_shake;
+ 
+ static char *os_name = "";
+ static char *os_major = "";
+@@ -1360,7 +1360,7 @@ void print_usage(char *argv[])
+ 
+ int main(int argc, char *argv[])
+ {
+-	int kvp_fd, len;
++	int kvp_fd = -1, len;
+ 	int error;
+ 	struct pollfd pfd;
+ 	char    *p;
+@@ -1400,14 +1400,6 @@ int main(int argc, char *argv[])
+ 	openlog("KVP", 0, LOG_USER);
+ 	syslog(LOG_INFO, "KVP starting; pid is:%d", getpid());
+ 
+-	kvp_fd = open("/dev/vmbus/hv_kvp", O_RDWR | O_CLOEXEC);
+-
+-	if (kvp_fd < 0) {
+-		syslog(LOG_ERR, "open /dev/vmbus/hv_kvp failed; error: %d %s",
+-			errno, strerror(errno));
+-		exit(EXIT_FAILURE);
+-	}
+-
+ 	/*
+ 	 * Retrieve OS release information.
+ 	 */
+@@ -1423,6 +1415,18 @@ int main(int argc, char *argv[])
+ 		exit(EXIT_FAILURE);
+ 	}
+ 
++reopen_kvp_fd:
++	if (kvp_fd != -1)
++		close(kvp_fd);
++	in_hand_shake = 1;
++	kvp_fd = open("/dev/vmbus/hv_kvp", O_RDWR | O_CLOEXEC);
++
++	if (kvp_fd < 0) {
++		syslog(LOG_ERR, "open /dev/vmbus/hv_kvp failed; error: %d %s",
++		       errno, strerror(errno));
++		exit(EXIT_FAILURE);
++	}
++
+ 	/*
+ 	 * Register ourselves with the kernel.
+ 	 */
+@@ -1457,8 +1461,7 @@ int main(int argc, char *argv[])
+ 			syslog(LOG_ERR, "read failed; error:%d %s",
+ 			       errno, strerror(errno));
+ 
+-			close(kvp_fd);
+-			return EXIT_FAILURE;
++			goto reopen_kvp_fd;
+ 		}
+ 
+ 		/*
+@@ -1617,13 +1620,17 @@ int main(int argc, char *argv[])
+ 			break;
+ 		}
+ 
+-		/* Send the value back to the kernel. */
++		/*
++		 * Send the value back to the kernel. Note: the write() may
++		 * return an error due to hibernation; we can ignore the error
++		 * by resetting the dev file, i.e. closing and re-opening it.
++		 */
+ kvp_done:
+ 		len = write(kvp_fd, hv_msg, sizeof(struct hv_kvp_msg));
+ 		if (len != sizeof(struct hv_kvp_msg)) {
+ 			syslog(LOG_ERR, "write failed; error: %d %s", errno,
+ 			       strerror(errno));
+-			exit(EXIT_FAILURE);
++			goto reopen_kvp_fd;
+ 		}
+ 	}
+ 
+diff --git a/hv_set_ifconfig.sh b/hv_set_ifconfig.sh
+index 18b27cc..3dd064c 100644
+--- a/hv_set_ifconfig.sh
++++ b/hv_set_ifconfig.sh
+@@ -12,7 +12,7 @@
+ # be used to configure the interface.
+ #
+ # Each Distro is expected to implement this script in a distro specific
+-# fashion. For instance on Distros that ship with Network Manager enabled,
++# fashion. For instance, on Distros that ship with Network Manager enabled,
+ # this script can be based on the Network Manager APIs for configuring the
+ # interface.
+ #
+diff --git a/hv_vss_daemon.c b/hv_vss_daemon.c
+index 92902a8..29a1e48 100644
+--- a/hv_vss_daemon.c
++++ b/hv_vss_daemon.c
+@@ -28,6 +28,8 @@
+ #include <stdbool.h>
+ #include <dirent.h>
+ 
++static bool fs_frozen;
++
+ /* Don't use syslog() in the function since that can cause write to disk */
+ static int vss_do_freeze(char *dir, unsigned int cmd)
+ {
+@@ -155,16 +157,22 @@ static int vss_operate(int operation)
+ 			continue;
+ 		}
+ 		error |= vss_do_freeze(ent->mnt_dir, cmd);
+-		if (error && operation == VSS_OP_FREEZE)
+-			goto err;
++		if (operation == VSS_OP_FREEZE) {
++			if (error)
++				goto err;
++			fs_frozen = true;
++		}
+ 	}
+ 
+ 	endmntent(mounts);
+ 
+ 	if (root_seen) {
+ 		error |= vss_do_freeze("/", cmd);
+-		if (error && operation == VSS_OP_FREEZE)
+-			goto err;
++		if (operation == VSS_OP_FREEZE) {
++			if (error)
++				goto err;
++			fs_frozen = true;
++		}
+ 	}
+ 
+ 	goto out;
+@@ -175,6 +183,7 @@ err:
+ 		endmntent(mounts);
+ 	}
+ 	vss_operate(VSS_OP_THAW);
++	fs_frozen = false;
+ 	/* Call syslog after we thaw all filesystems */
+ 	if (ent)
+ 		syslog(LOG_ERR, "FREEZE of %s failed; error:%d %s",
+@@ -196,13 +205,13 @@ void print_usage(char *argv[])
+ 
+ int main(int argc, char *argv[])
+ {
+-	int vss_fd, len;
++	int vss_fd = -1, len;
+ 	int error;
+ 	struct pollfd pfd;
+ 	int	op;
+ 	struct hv_vss_msg vss_msg[1];
+ 	int daemonize = 1, long_index = 0, opt;
+-	int in_handshake = 1;
++	int in_handshake;
+ 	__u32 kernel_modver;
+ 
+ 	static struct option long_options[] = {
+@@ -232,6 +241,18 @@ int main(int argc, char *argv[])
+ 	openlog("Hyper-V VSS", 0, LOG_USER);
+ 	syslog(LOG_INFO, "VSS starting; pid is:%d", getpid());
+ 
++reopen_vss_fd:
++	if (vss_fd != -1)
++		close(vss_fd);
++	if (fs_frozen) {
++		if (vss_operate(VSS_OP_THAW) || fs_frozen) {
++			syslog(LOG_ERR, "failed to thaw file system: err=%d",
++			       errno);
++			exit(EXIT_FAILURE);
++		}
++	}
++
++	in_handshake = 1;
+ 	vss_fd = open("/dev/vmbus/hv_vss", O_RDWR);
+ 	if (vss_fd < 0) {
+ 		syslog(LOG_ERR, "open /dev/vmbus/hv_vss failed; error: %d %s",
+@@ -247,8 +268,7 @@ int main(int argc, char *argv[])
+ 	if (len < 0) {
+ 		syslog(LOG_ERR, "registration to kernel failed; error: %d %s",
+ 		       errno, strerror(errno));
+-		close(vss_fd);
+-		exit(EXIT_FAILURE);
++		goto reopen_vss_fd;
+ 	}
+ 
+ 	pfd.fd = vss_fd;
+@@ -312,14 +332,18 @@ int main(int argc, char *argv[])
+ 		default:
+ 			syslog(LOG_ERR, "Illegal op:%d\n", op);
+ 		}
++
++		/*
++		 * The write() may return an error due to the faked VSS_OP_THAW
++		 * message upon hibernation. Ignore the error by resetting the
++		 * dev file, i.e. closing and re-opening it.
++		 */
+ 		vss_msg->error = error;
+ 		len = write(vss_fd, vss_msg, sizeof(struct hv_vss_msg));
+ 		if (len != sizeof(struct hv_vss_msg)) {
+ 			syslog(LOG_ERR, "write failed; error: %d %s", errno,
+ 			       strerror(errno));
+-
+-			if (op == VSS_OP_FREEZE)
+-				vss_operate(VSS_OP_THAW);
++			goto reopen_vss_fd;
+ 		}
+ 	}
+ 
+-- 
+2.27.0
+

0005-Add-vmbus_testing-tool-build-files.patch

@@ -1,29 +1,16 @@
-From d8ca5e0a429b8f7395e136e713980db6a7ac8dc2 Mon Sep 17 00:00:00 2001
-From: Mohammed Gamal <mgamal@redhat.com>
-Date: Wed, 15 Apr 2020 12:00:30 +0200
-Subject: [PATCH 2/2] Add vmbus_testing tool build files
-
-RH-Author: Mohammed Gamal <mgamal@redhat.com>
-Message-id: <20200414183955.194006-3-mgamal@redhat.com>
-Patchwork-id: 94690
-O-Subject: [RHEL8.3 virt hyperv-daemons PATCH v5 2/2] Add vmbus_testing tool build files
-Bugzilla: 1816750
-RH-Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
-RH-Acked-by: Cathy Avery <cavery@redhat.com>
+From a13aa83d1b5bb4b6ce4396aef3457b48695b7c41 Mon Sep 17 00:00:00 2001
+From: Miroslav Rezanina <mrezanin@redhat.com>
+Date: Thu, 6 May 2021 12:53:31 +0200
+Subject: Add vmbus_testing tool build files
 
 Add the vmbus_testing tool to redhat build dirs
 
+(cherry-pick from rhel 8.4.0 commit d8ca5e0)
 Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
----
- redhat/hyperv-daemons.spec.template |   2 +
- vmbus_testing                       | 376 ++++++++++++++++++++++++++++
- 2 files changed, 378 insertions(+)
- create mode 100755 vmbus_testing
-
 Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
 ---
- redhat/hyperv-daemons.spec.template |   2 +
- vmbus_testing                       | 376 ++++++++++++++++++++++++++++++++++++
+ .distro/hyperv-daemons.spec.template |   2 +
+ vmbus_testing                        | 376 +++++++++++++++++++++++++++
  2 files changed, 378 insertions(+)
  create mode 100755 vmbus_testing
 
@@ -410,5 +397,5 @@ index 0000000..e721290
 +if __name__ == "__main__":
 +        main()
 -- 
-1.8.3.1
+2.27.0
 

0006-tools-hv-change-http-to-https-in-hv_kvp_daemon.c.patch

@@ -1,12 +1,7 @@
-From e956573e4fd5e489fd68a7d46f0aa715ee19084e Mon Sep 17 00:00:00 2001
-From: Mohammed Gamal <mgamal@redhat.com>
-Date: Wed, 25 Nov 2020 15:23:29 +0100
-Subject: [PATCH] tools: hv: change http to https in hv_kvp_daemon.c
-
-RH-Author: Mohammed Gamal Morsy (mmorsy)
-RH-MergeRequest: 1: RHEL 8.4.0 updates
-RH-Commit: [1/1] b7202f11 (mmorsy/hyperv-daemons)
-RH-Bugzilla: 1886104
+From 6ed9946f9a4f1a01846add2279e8d0640c1c2f1c Mon Sep 17 00:00:00 2001
+From: Miroslav Rezanina <mrezanin@redhat.com>
+Date: Thu, 6 May 2021 12:53:58 +0200
+Subject: tools: hv: change http to https in hv_kvp_daemon.c
 
 The patch has no functional change. Only changes the URL pointed to
 in one of the comments
@@ -37,12 +32,14 @@ Date:   Sun Jul 5 23:44:57 2020 +0200
     Signed-off-by: Wei Liu <wei.liu@kernel.org>
 
 Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
+(cherry-picked from rhel 8.4.0 commit e956573)
+Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
 ---
  hv_kvp_daemon.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/hv_kvp_daemon.c b/hv_kvp_daemon.c
-index ee9c1bb..1e6fd6c 100644
+index 0e5f14a..c06c94d 100644
 --- a/hv_kvp_daemon.c
 +++ b/hv_kvp_daemon.c
 @@ -437,7 +437,7 @@ void kvp_get_os_info(void)
@@ -55,5 +52,5 @@ index ee9c1bb..1e6fd6c 100644
  	file = fopen("/etc/os-release", "r");
  	if (file != NULL) {
 -- 
-2.18.4
+2.27.0
 

README.rst

@@ -0,0 +1,18 @@
+===================
+hyperv-daemons development
+===================
+
+hyperv-daemons is maintained in a `source tree`_ rather than directly in dist-git
+using packit service that provides way to develope using regular source code
+structure and provides way to generate SRPM and build using koji service.
+
+Developers deliver all changes to sourc-git using merge request. Only maintainers
+will be pushing changes sent to source-git to dist-git.
+
+Each release in dist-git is tagged in the source repository so you can easily
+check out the source tree for a build. The tags are in the format
+name-version-release, but note release doesn't contain the dist tag since the
+source can be built in different build roots (Fedora, CentOS, etc.)
+
+.. _source tree: https://gitlab.com/redhat/centos-stream/src/hyperv-daemons
+

SOURCES/0001-tools-hv-update-lsvmbus-to-be-compatible-with-python.patch

@@ -1,48 +0,0 @@
-From 1e2d32c6ee12b45823ba3cda0054a4bd843896fc Mon Sep 17 00:00:00 2001
-From: Olaf Hering <olaf@aepfle.de>
-Date: Tue, 5 Jun 2018 13:37:55 -0700
-Subject: [PATCH] tools: hv: update lsvmbus to be compatible with python3
-
-Python3 changed the way how 'print' works.
-Adjust the code to a syntax that is understood by python2 and python3.
-
-Signed-off-by: Olaf Hering <olaf@aepfle.de>
-Acked-by: Dexuan Cui <decui@microsoft.com>
-Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
----
- tools/hv/lsvmbus | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/tools/hv/lsvmbus b/tools/hv/lsvmbus
-index 353e56768df8..55e7374bade0 100644
---- a/tools/hv/lsvmbus
-+++ b/tools/hv/lsvmbus
-@@ -17,7 +17,7 @@ if options.verbose is not None:
- 
- vmbus_sys_path = '/sys/bus/vmbus/devices'
- if not os.path.isdir(vmbus_sys_path):
--	print "%s doesn't exist: exiting..." % vmbus_sys_path
-+	print("%s doesn't exist: exiting..." % vmbus_sys_path)
- 	exit(-1)
- 
- vmbus_dev_dict = {
-@@ -93,11 +93,11 @@ format2 = '%2s: Class_ID = %s - %s\n\tDevice_ID = %s\n\tSysfs path: %s\n%s'
- 
- for d in vmbus_dev_list:
- 	if verbose == 0:
--		print ('VMBUS ID ' + format0) % (d.vmbus_id, d.dev_desc)
-+		print(('VMBUS ID ' + format0) % (d.vmbus_id, d.dev_desc))
- 	elif verbose == 1:
--		print ('VMBUS ID ' + format1) %	\
--			(d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping)
-+		print (('VMBUS ID ' + format1) %	\
-+			(d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping))
- 	else:
--		print ('VMBUS ID ' + format2) % \
-+		print (('VMBUS ID ' + format2) % \
- 			(d.vmbus_id, d.class_id, d.dev_desc, \
--			d.device_id, d.sysfs_path, d.chn_vp_mapping)
-+			d.device_id, d.sysfs_path, d.chn_vp_mapping))
--- 
-2.14.4
-

SOURCES/0002-hv_set_ifconfig_nm_enable.patch

@@ -1,10 +0,0 @@
---- hv_set_ifconfig.sh.orig	2018-06-11 15:57:50.000000000 +0200
-+++ hv_set_ifconfig.sh	2018-09-03 09:34:57.470114502 +0200
-@@ -51,7 +51,6 @@
- 
- 
- echo "IPV6INIT=yes" >> $1
--echo "NM_CONTROLLED=no" >> $1
- echo "PEERDNS=yes" >> $1
- echo "ONBOOT=yes" >> $1
- 

SOURCES/COPYING

@@ -1,356 +0,0 @@
-
-   NOTE! This copyright does *not* cover user programs that use kernel
- services by normal system calls - this is merely considered normal use
- of the kernel, and does *not* fall under the heading of "derived work".
- Also note that the GPL below is copyrighted by the Free Software
- Foundation, but the instance of code that it refers to (the Linux
- kernel) is copyrighted by me and others who actually wrote it.
-
- Also note that the only valid version of the GPL as far as the kernel
- is concerned is _this_ particular version of the license (ie v2, not
- v2.2 or v3.x or whatever), unless explicitly otherwise stated.
-
-			Linus Torvalds
-
-----------------------------------------
-
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.

SOURCES/hpvd-Set-IgnoreOnIsolate-1-in-systemd-units.patch

@@ -1,74 +0,0 @@
-From 2b218c6e29ff031862c0976deb9810dfb2d79ab2 Mon Sep 17 00:00:00 2001
-From: Vitaly Kuznetsov <vkuznets@redhat.com>
-Date: Thu, 14 Nov 2019 12:21:46 +0100
-Subject: [PATCH] Set IgnoreOnIsolate=1 in systemd units
-
-RH-Author: Vitaly Kuznetsov <vkuznets@redhat.com>
-Message-id: <20191114122146.17009-1-vkuznets@redhat.com>
-Patchwork-id: 92251
-O-Subject: [RHEL8.2 hyperv-daemons PATCH] Set IgnoreOnIsolate=1 in systemd units
-Bugzilla: 1769920
-RH-Acked-by: Mohammed Gamal <mgamal@redhat.com>
-RH-Acked-by: Eduardo Otubo <otubo@redhat.com>
-RH-Acked-by: Laszlo Ersek <lersek@redhat.com>
-
-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1769920
-Branch: rhel-8.2.0
-Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=24699501
-Upstream: RHEL-only (upstream doesn't ship systemd units)
-
-Hyper-V daemons' units are udev activated: when the appropriate device
-appears systemd unit is started and normal targets (e.g. multi-user.target)
-don't depend on these units. With systemd it is possible to try to isolate
-the target (somewhat similar to switching runlevel), this is supposed to
-shut everything which the target doesn't depend on (like units started
-manually) off. It seems that the general users' expectation is that
-hyperv-daemons units survive the procedure.
-
-Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
-Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
----
- hypervfcopyd.service | 1 +
- hypervkvpd.service   | 1 +
- hypervvssd.service   | 1 +
- 3 files changed, 3 insertions(+)
-
-diff --git a/hypervfcopyd.service b/hypervfcopyd.service
-index fa4a0a3..dd14a97 100644
---- a/hypervfcopyd.service
-+++ b/hypervfcopyd.service
-@@ -1,6 +1,7 @@
- [Unit]
- Description=Hyper-V FCOPY daemon
- BindsTo=sys-devices-virtual-misc-vmbus\x21hv_fcopy.device
-+IgnoreOnIsolate=1
- 
- [Service]
- ExecStart=/usr/sbin/hypervfcopyd -n
-diff --git a/hypervkvpd.service b/hypervkvpd.service
-index d8bfdf3..36ee11c 100644
---- a/hypervkvpd.service
-+++ b/hypervkvpd.service
-@@ -2,6 +2,7 @@
- Description=Hyper-V KVP daemon
- BindsTo=sys-devices-virtual-misc-vmbus\x21hv_kvp.device
- After=network.target
-+IgnoreOnIsolate=1
- 
- [Service]
- Type=simple
-diff --git a/hypervvssd.service b/hypervvssd.service
-index 9751cb3..1e5ff43 100644
---- a/hypervvssd.service
-+++ b/hypervvssd.service
-@@ -1,6 +1,7 @@
- [Unit]
- Description=Hyper-V VSS daemon
- BindsTo=sys-devices-virtual-misc-vmbus\x21hv_vss.device
-+IgnoreOnIsolate=1
- 
- [Service]
- ExecStart=/usr/sbin/hypervvssd -n
--- 
-1.8.3.1
-

SOURCES/hpvd-hypervkvpd.service-ordering-fixes.patch

@@ -1,54 +0,0 @@
-From 33725de60efa5e867ed73d2404d316785d0e4bb5 Mon Sep 17 00:00:00 2001
-From: Mohammed Gamal <mgamal@redhat.com>
-Date: Wed, 20 Jul 2022 11:48:40 +0200
-Subject: [PATCH 1/2] hypervkvpd.service: ordering fixes
-
-RH-Author: Mohamed Gamal Morsy <mmorsy@redhat.com>
-RH-MergeRequest: 3: hypervkvpd.service: ordering fixes
-RH-Commit: [1/2] f5bec088f7cf4afd641a2d7184a4e29cd1734bf4
-RH-Bugzilla: 2115761
-RH-Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
-RH-Acked-by: Cathy Avery <cavery@redhat.com>
-
-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2115761
-
-	From 8dcff588c8eb1ab3119c6b0acead03189814b955 Mon Sep 17 00:00:00 2001
-	From: Chris Patterson <cpatterson@microsoft.com>
-	Date: Jul 01 2022 14:36:25 +0000
-	Subject: hypervkvpd.service: ordering fixes
-
-	- Only start kvpd under Hyper-V.
-
-	- Minimize dependencies for kvpd by removing the unnecessary
-	network.target requirement, but add kvp device and mount
-	requirements.
-
-	Start before cloud-init-local.service which relies on kvpd
-	for Azure.
-
-	Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
-
-Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
----
- hypervkvpd.service | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/hypervkvpd.service b/hypervkvpd.service
-index 36ee11c..40dff13 100644
---- a/hypervkvpd.service
-+++ b/hypervkvpd.service
-@@ -1,7 +1,10 @@
- [Unit]
- Description=Hyper-V KVP daemon
-+ConditionVirtualization=microsoft
- BindsTo=sys-devices-virtual-misc-vmbus\x21hv_kvp.device
--After=network.target
-+After=sys-devices-virtual-misc-vmbus\x21hv_kvp.device
-+RequiresMountsFor=/var/lib/hyperv
-+Before=cloud-init-local.service
- IgnoreOnIsolate=1
- 
- [Service]
--- 
-2.31.1
-

SOURCES/hpvd-redhat-Add-ConditionalVirtualization-to-the-rest-of-.patch

@@ -1,49 +0,0 @@
-From 3eb64f25afdf65d9999d155d8c89327cf9d27036 Mon Sep 17 00:00:00 2001
-From: Mohammed Gamal <mgamal@redhat.com>
-Date: Mon, 15 Aug 2022 17:38:37 +0200
-Subject: [PATCH 2/2] redhat: Add ConditionalVirtualization to the rest of
- systemd units
-
-RH-Author: Mohamed Gamal Morsy <mmorsy@redhat.com>
-RH-MergeRequest: 3: hypervkvpd.service: ordering fixes
-RH-Commit: [2/2] 6638ac3cfcff63e664d6ba86772a4bdfe45d2084
-RH-Bugzilla: 2115761
-RH-Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
-RH-Acked-by: Cathy Avery <cavery@redhat.com>
-
-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2115761
-
-Add ConditionalVirtualization to the rest of systemd units to make sure
-they're started when running in Azure/Hyper-V.
-
-Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
----
- hypervfcopyd.service | 1 +
- hypervvssd.service   | 1 +
- 2 files changed, 2 insertions(+)
-
-diff --git a/hypervfcopyd.service b/hypervfcopyd.service
-index dd14a97..aab4b6b 100644
---- a/hypervfcopyd.service
-+++ b/hypervfcopyd.service
-@@ -1,5 +1,6 @@
- [Unit]
- Description=Hyper-V FCOPY daemon
-+ConditionVirtualization=microsoft
- BindsTo=sys-devices-virtual-misc-vmbus\x21hv_fcopy.device
- IgnoreOnIsolate=1
- 
-diff --git a/hypervvssd.service b/hypervvssd.service
-index 1e5ff43..6a0fad0 100644
---- a/hypervvssd.service
-+++ b/hypervvssd.service
-@@ -1,5 +1,6 @@
- [Unit]
- Description=Hyper-V VSS daemon
-+ConditionVirtualization=microsoft
- BindsTo=sys-devices-virtual-misc-vmbus\x21hv_vss.device
- IgnoreOnIsolate=1
- 
--- 
-2.31.1
-

SOURCES/hv_fcopy_daemon.c

@@ -1,247 +0,0 @@
-/*
- * An implementation of host to guest copy functionality for Linux.
- *
- * Copyright (C) 2014, Microsoft, Inc.
- *
- * Author : K. Y. Srinivasan <kys@microsoft.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- */
-
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-#include <linux/hyperv.h>
-#include <linux/limits.h>
-#include <syslog.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <getopt.h>
-
-static int target_fd;
-static char target_fname[PATH_MAX];
-static unsigned long long filesize;
-
-static int hv_start_fcopy(struct hv_start_fcopy *smsg)
-{
-	int error = HV_E_FAIL;
-	char *q, *p;
-
-	filesize = 0;
-	p = (char *)smsg->path_name;
-	snprintf(target_fname, sizeof(target_fname), "%s/%s",
-		 (char *)smsg->path_name, (char *)smsg->file_name);
-
-	syslog(LOG_INFO, "Target file name: %s", target_fname);
-	/*
-	 * Check to see if the path is already in place; if not,
-	 * create if required.
-	 */
-	while ((q = strchr(p, '/')) != NULL) {
-		if (q == p) {
-			p++;
-			continue;
-		}
-		*q = '\0';
-		if (access((char *)smsg->path_name, F_OK)) {
-			if (smsg->copy_flags & CREATE_PATH) {
-				if (mkdir((char *)smsg->path_name, 0755)) {
-					syslog(LOG_ERR, "Failed to create %s",
-						(char *)smsg->path_name);
-					goto done;
-				}
-			} else {
-				syslog(LOG_ERR, "Invalid path: %s",
-					(char *)smsg->path_name);
-				goto done;
-			}
-		}
-		p = q + 1;
-		*q = '/';
-	}
-
-	if (!access(target_fname, F_OK)) {
-		syslog(LOG_INFO, "File: %s exists", target_fname);
-		if (!(smsg->copy_flags & OVER_WRITE)) {
-			error = HV_ERROR_ALREADY_EXISTS;
-			goto done;
-		}
-	}
-
-	target_fd = open(target_fname,
-			 O_RDWR | O_CREAT | O_TRUNC | O_CLOEXEC, 0744);
-	if (target_fd == -1) {
-		syslog(LOG_INFO, "Open Failed: %s", strerror(errno));
-		goto done;
-	}
-
-	error = 0;
-done:
-	return error;
-}
-
-static int hv_copy_data(struct hv_do_fcopy *cpmsg)
-{
-	ssize_t bytes_written;
-	int ret = 0;
-
-	bytes_written = pwrite(target_fd, cpmsg->data, cpmsg->size,
-				cpmsg->offset);
-
-	filesize += cpmsg->size;
-	if (bytes_written != cpmsg->size) {
-		switch (errno) {
-		case ENOSPC:
-			ret = HV_ERROR_DISK_FULL;
-			break;
-		default:
-			ret = HV_E_FAIL;
-			break;
-		}
-		syslog(LOG_ERR, "pwrite failed to write %llu bytes: %ld (%s)",
-		       filesize, (long)bytes_written, strerror(errno));
-	}
-
-	return ret;
-}
-
-static int hv_copy_finished(void)
-{
-	close(target_fd);
-	return 0;
-}
-static int hv_copy_cancel(void)
-{
-	close(target_fd);
-	unlink(target_fname);
-	return 0;
-
-}
-
-void print_usage(char *argv[])
-{
-	fprintf(stderr, "Usage: %s [options]\n"
-		"Options are:\n"
-		"  -n, --no-daemon        stay in foreground, don't daemonize\n"
-		"  -h, --help             print this help\n", argv[0]);
-}
-
-int main(int argc, char *argv[])
-{
-	int fcopy_fd;
-	int error;
-	int daemonize = 1, long_index = 0, opt;
-	int version = FCOPY_CURRENT_VERSION;
-	union {
-		struct hv_fcopy_hdr hdr;
-		struct hv_start_fcopy start;
-		struct hv_do_fcopy copy;
-		__u32 kernel_modver;
-	} buffer = { };
-	int in_handshake = 1;
-
-	static struct option long_options[] = {
-		{"help",	no_argument,	   0,  'h' },
-		{"no-daemon",	no_argument,	   0,  'n' },
-		{0,		0,		   0,  0   }
-	};
-
-	while ((opt = getopt_long(argc, argv, "hn", long_options,
-				  &long_index)) != -1) {
-		switch (opt) {
-		case 'n':
-			daemonize = 0;
-			break;
-		case 'h':
-		default:
-			print_usage(argv);
-			exit(EXIT_FAILURE);
-		}
-	}
-
-	if (daemonize && daemon(1, 0)) {
-		syslog(LOG_ERR, "daemon() failed; error: %s", strerror(errno));
-		exit(EXIT_FAILURE);
-	}
-
-	openlog("HV_FCOPY", 0, LOG_USER);
-	syslog(LOG_INFO, "starting; pid is:%d", getpid());
-
-	fcopy_fd = open("/dev/vmbus/hv_fcopy", O_RDWR);
-
-	if (fcopy_fd < 0) {
-		syslog(LOG_ERR, "open /dev/vmbus/hv_fcopy failed; error: %d %s",
-			errno, strerror(errno));
-		exit(EXIT_FAILURE);
-	}
-
-	/*
-	 * Register with the kernel.
-	 */
-	if ((write(fcopy_fd, &version, sizeof(int))) != sizeof(int)) {
-		syslog(LOG_ERR, "Registration failed: %s", strerror(errno));
-		exit(EXIT_FAILURE);
-	}
-
-	while (1) {
-		/*
-		 * In this loop we process fcopy messages after the
-		 * handshake is complete.
-		 */
-		ssize_t len;
-
-		len = pread(fcopy_fd, &buffer, sizeof(buffer), 0);
-		if (len < 0) {
-			syslog(LOG_ERR, "pread failed: %s", strerror(errno));
-			exit(EXIT_FAILURE);
-		}
-
-		if (in_handshake) {
-			if (len != sizeof(buffer.kernel_modver)) {
-				syslog(LOG_ERR, "invalid version negotiation");
-				exit(EXIT_FAILURE);
-			}
-			in_handshake = 0;
-			syslog(LOG_INFO, "kernel module version: %u",
-			       buffer.kernel_modver);
-			continue;
-		}
-
-		switch (buffer.hdr.operation) {
-		case START_FILE_COPY:
-			error = hv_start_fcopy(&buffer.start);
-			break;
-		case WRITE_TO_FILE:
-			error = hv_copy_data(&buffer.copy);
-			break;
-		case COMPLETE_FCOPY:
-			error = hv_copy_finished();
-			break;
-		case CANCEL_FCOPY:
-			error = hv_copy_cancel();
-			break;
-
-		default:
-			syslog(LOG_ERR, "Unknown operation: %d",
-				buffer.hdr.operation);
-
-		}
-
-		if (pwrite(fcopy_fd, &error, sizeof(int), 0) != sizeof(int)) {
-			syslog(LOG_ERR, "pwrite failed: %s", strerror(errno));
-			exit(EXIT_FAILURE);
-		}
-	}
-}

SOURCES/hv_get_dhcp_info.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-
-# This example script retrieves the DHCP state of a given interface.
-# In the interest of keeping the KVP daemon code free of distro specific
-# information; the kvp daemon code invokes this external script to gather
-# DHCP setting for the specific interface.
-#
-# Input: Name of the interface
-#
-# Output: The script prints the string "Enabled" to stdout to indicate
-#	that DHCP is enabled on the interface. If DHCP is not enabled,
-#	the script prints the string "Disabled" to stdout.
-#
-# Each Distro is expected to implement this script in a distro specific
-# fashion. For instance on Distros that ship with Network Manager enabled,
-# this script can be based on the Network Manager APIs for retrieving DHCP
-# information.
-
-if_file="/etc/sysconfig/network-scripts/ifcfg-"$1
-
-dhcp=$(grep "dhcp" $if_file 2>/dev/null)
-
-if [ "$dhcp" != "" ];
-then
-echo "Enabled"
-else
-echo "Disabled"
-fi

SOURCES/hv_get_dns_info.sh

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-# This example script parses /etc/resolv.conf to retrive DNS information.
-# In the interest of keeping the KVP daemon code free of distro specific
-# information; the kvp daemon code invokes this external script to gather
-# DNS information.
-# This script is expected to print the nameserver values to stdout.
-# Each Distro is expected to implement this script in a distro specific
-# fashion. For instance on Distros that ship with Network Manager enabled,
-# this script can be based on the Network Manager APIs for retrieving DNS
-# entries.
-
-cat /etc/resolv.conf 2>/dev/null | awk '/^nameserver/ { print $2 }'

SOURCES/hv_set_ifconfig.sh

@@ -1,65 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-
-# This example script activates an interface based on the specified
-# configuration.
-#
-# In the interest of keeping the KVP daemon code free of distro specific
-# information; the kvp daemon code invokes this external script to configure
-# the interface.
-#
-# The only argument to this script is the configuration file that is to
-# be used to configure the interface.
-#
-# Each Distro is expected to implement this script in a distro specific
-# fashion. For instance on Distros that ship with Network Manager enabled,
-# this script can be based on the Network Manager APIs for configuring the
-# interface.
-#
-# This example script is based on a RHEL environment.
-#
-# Here is the format of the ip configuration file:
-#
-# HWADDR=macaddr
-# DEVICE=interface name
-# BOOTPROTO=<protocol> (where <protocol> is "dhcp" if DHCP is configured
-#                       or "none" if no boot-time protocol should be used)
-#
-# IPADDR0=ipaddr1
-# IPADDR1=ipaddr2
-# IPADDRx=ipaddry (where y = x + 1)
-#
-# NETMASK0=netmask1
-# NETMASKx=netmasky (where y = x + 1)
-#
-# GATEWAY=ipaddr1
-# GATEWAYx=ipaddry (where y = x + 1)
-#
-# DNSx=ipaddrx (where first DNS address is tagged as DNS1 etc)
-#
-# IPV6 addresses will be tagged as IPV6ADDR, IPV6 gateway will be
-# tagged as IPV6_DEFAULTGW and IPV6 NETMASK will be tagged as
-# IPV6NETMASK.
-#
-# The host can specify multiple ipv4 and ipv6 addresses to be
-# configured for the interface. Furthermore, the configuration
-# needs to be persistent. A subsequent GET call on the interface
-# is expected to return the configuration that is set via the SET
-# call.
-#
-
-
-
-echo "IPV6INIT=yes" >> $1
-echo "NM_CONTROLLED=no" >> $1
-echo "PEERDNS=yes" >> $1
-echo "ONBOOT=yes" >> $1
-
-
-cp $1 /etc/sysconfig/network-scripts/
-
-
-interface=$(echo $1 | awk -F - '{ print $2 }')
-
-/sbin/ifdown $interface 2>/dev/null
-/sbin/ifup $interface 2>/dev/null

SOURCES/hv_vss_daemon.c

@@ -1,280 +0,0 @@
-/*
- * An implementation of the host initiated guest snapshot for Hyper-V.
- *
- *
- * Copyright (C) 2013, Microsoft, Inc.
- * Author : K. Y. Srinivasan <kys@microsoft.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- */
-
-
-#include <sys/types.h>
-#include <sys/poll.h>
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <sys/sysmacros.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <mntent.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/hyperv.h>
-#include <syslog.h>
-#include <getopt.h>
-
-/* Don't use syslog() in the function since that can cause write to disk */
-static int vss_do_freeze(char *dir, unsigned int cmd)
-{
-	int ret, fd = open(dir, O_RDONLY);
-
-	if (fd < 0)
-		return 1;
-
-	ret = ioctl(fd, cmd, 0);
-
-	/*
-	 * If a partition is mounted more than once, only the first
-	 * FREEZE/THAW can succeed and the later ones will get
-	 * EBUSY/EINVAL respectively: there could be 2 cases:
-	 * 1) a user may mount the same partition to differnt directories
-	 *  by mistake or on purpose;
-	 * 2) The subvolume of btrfs appears to have the same partition
-	 * mounted more than once.
-	 */
-	if (ret) {
-		if ((cmd == FIFREEZE && errno == EBUSY) ||
-		    (cmd == FITHAW && errno == EINVAL)) {
-			close(fd);
-			return 0;
-		}
-	}
-
-	close(fd);
-	return !!ret;
-}
-
-static int vss_operate(int operation)
-{
-	char match[] = "/dev/";
-	FILE *mounts;
-	struct mntent *ent;
-	struct stat sb;
-	char errdir[1024] = {0};
-	unsigned int cmd;
-	int error = 0, root_seen = 0, save_errno = 0;
-
-	switch (operation) {
-	case VSS_OP_FREEZE:
-		cmd = FIFREEZE;
-		break;
-	case VSS_OP_THAW:
-		cmd = FITHAW;
-		break;
-	default:
-		return -1;
-	}
-
-	mounts = setmntent("/proc/mounts", "r");
-	if (mounts == NULL)
-		return -1;
-
-	while ((ent = getmntent(mounts))) {
-		if (strncmp(ent->mnt_fsname, match, strlen(match)))
-			continue;
-		if (stat(ent->mnt_fsname, &sb) == -1)
-			continue;
-		if (S_ISBLK(sb.st_mode) && major(sb.st_rdev) == LOOP_MAJOR)
-			continue;
-		if (hasmntopt(ent, MNTOPT_RO) != NULL)
-			continue;
-		if (strcmp(ent->mnt_type, "vfat") == 0)
-			continue;
-		if (strcmp(ent->mnt_dir, "/") == 0) {
-			root_seen = 1;
-			continue;
-		}
-		error |= vss_do_freeze(ent->mnt_dir, cmd);
-		if (error && operation == VSS_OP_FREEZE)
-			goto err;
-	}
-
-	endmntent(mounts);
-
-	if (root_seen) {
-		error |= vss_do_freeze("/", cmd);
-		if (error && operation == VSS_OP_FREEZE)
-			goto err;
-	}
-
-	goto out;
-err:
-	save_errno = errno;
-	if (ent) {
-		strncpy(errdir, ent->mnt_dir, sizeof(errdir)-1);
-		endmntent(mounts);
-	}
-	vss_operate(VSS_OP_THAW);
-	/* Call syslog after we thaw all filesystems */
-	if (ent)
-		syslog(LOG_ERR, "FREEZE of %s failed; error:%d %s",
-		       errdir, save_errno, strerror(save_errno));
-	else
-		syslog(LOG_ERR, "FREEZE of / failed; error:%d %s", save_errno,
-		       strerror(save_errno));
-out:
-	return error;
-}
-
-void print_usage(char *argv[])
-{
-	fprintf(stderr, "Usage: %s [options]\n"
-		"Options are:\n"
-		"  -n, --no-daemon        stay in foreground, don't daemonize\n"
-		"  -h, --help             print this help\n", argv[0]);
-}
-
-int main(int argc, char *argv[])
-{
-	int vss_fd, len;
-	int error;
-	struct pollfd pfd;
-	int	op;
-	struct hv_vss_msg vss_msg[1];
-	int daemonize = 1, long_index = 0, opt;
-	int in_handshake = 1;
-	__u32 kernel_modver;
-
-	static struct option long_options[] = {
-		{"help",	no_argument,	   0,  'h' },
-		{"no-daemon",	no_argument,	   0,  'n' },
-		{0,		0,		   0,  0   }
-	};
-
-	while ((opt = getopt_long(argc, argv, "hn", long_options,
-				  &long_index)) != -1) {
-		switch (opt) {
-		case 'n':
-			daemonize = 0;
-			break;
-		case 'h':
-		default:
-			print_usage(argv);
-			exit(EXIT_FAILURE);
-		}
-	}
-
-	if (daemonize && daemon(1, 0))
-		return 1;
-
-	openlog("Hyper-V VSS", 0, LOG_USER);
-	syslog(LOG_INFO, "VSS starting; pid is:%d", getpid());
-
-	vss_fd = open("/dev/vmbus/hv_vss", O_RDWR);
-	if (vss_fd < 0) {
-		syslog(LOG_ERR, "open /dev/vmbus/hv_vss failed; error: %d %s",
-		       errno, strerror(errno));
-		exit(EXIT_FAILURE);
-	}
-	/*
-	 * Register ourselves with the kernel.
-	 */
-	vss_msg->vss_hdr.operation = VSS_OP_REGISTER1;
-
-	len = write(vss_fd, vss_msg, sizeof(struct hv_vss_msg));
-	if (len < 0) {
-		syslog(LOG_ERR, "registration to kernel failed; error: %d %s",
-		       errno, strerror(errno));
-		close(vss_fd);
-		exit(EXIT_FAILURE);
-	}
-
-	pfd.fd = vss_fd;
-
-	while (1) {
-		pfd.events = POLLIN;
-		pfd.revents = 0;
-
-		if (poll(&pfd, 1, -1) < 0) {
-			syslog(LOG_ERR, "poll failed; error:%d %s", errno, strerror(errno));
-			if (errno == EINVAL) {
-				close(vss_fd);
-				exit(EXIT_FAILURE);
-			}
-			else
-				continue;
-		}
-
-		len = read(vss_fd, vss_msg, sizeof(struct hv_vss_msg));
-
-		if (in_handshake) {
-			if (len != sizeof(kernel_modver)) {
-				syslog(LOG_ERR, "invalid version negotiation");
-				exit(EXIT_FAILURE);
-			}
-			kernel_modver = *(__u32 *)vss_msg;
-			in_handshake = 0;
-			syslog(LOG_INFO, "VSS: kernel module version: %d",
-			       kernel_modver);
-			continue;
-		}
-
-		if (len != sizeof(struct hv_vss_msg)) {
-			syslog(LOG_ERR, "read failed; error:%d %s",
-			       errno, strerror(errno));
-			close(vss_fd);
-			return EXIT_FAILURE;
-		}
-
-		op = vss_msg->vss_hdr.operation;
-		error =  HV_S_OK;
-
-		switch (op) {
-		case VSS_OP_FREEZE:
-		case VSS_OP_THAW:
-			error = vss_operate(op);
-			syslog(LOG_INFO, "VSS: op=%s: %s\n",
-				op == VSS_OP_FREEZE ? "FREEZE" : "THAW",
-				error ? "failed" : "succeeded");
-
-			if (error) {
-				error = HV_E_FAIL;
-				syslog(LOG_ERR, "op=%d failed!", op);
-				syslog(LOG_ERR, "report it with these files:");
-				syslog(LOG_ERR, "/etc/fstab and /proc/mounts");
-			}
-			break;
-		case VSS_OP_HOT_BACKUP:
-			syslog(LOG_INFO, "VSS: op=CHECK HOT BACKUP\n");
-			break;
-		default:
-			syslog(LOG_ERR, "Illegal op:%d\n", op);
-		}
-		vss_msg->error = error;
-		len = write(vss_fd, vss_msg, sizeof(struct hv_vss_msg));
-		if (len != sizeof(struct hv_vss_msg)) {
-			syslog(LOG_ERR, "write failed; error: %d %s", errno,
-			       strerror(errno));
-
-			if (op == VSS_OP_FREEZE)
-				vss_operate(VSS_OP_THAW);
-		}
-	}
-
-	close(vss_fd);
-	exit(0);
-}

SOURCES/hvd-Update-C-files-and-scripts-to-kernel-version-5.7-rc1.patch

@@ -1,685 +0,0 @@
-From b0a20fac0e74b0b3eecc20ffe74006e7877da352 Mon Sep 17 00:00:00 2001
-From: Mohammed Gamal <mgamal@redhat.com>
-Date: Wed, 15 Apr 2020 12:00:14 +0200
-Subject: [PATCH 1/2] Update C files and scripts to kernel version 5.7-rc1
-
-RH-Author: Mohammed Gamal <mgamal@redhat.com>
-Message-id: <20200414183955.194006-2-mgamal@redhat.com>
-Patchwork-id: 94689
-O-Subject: [RHEL8.3 virt hyperv-daemons PATCH v5 1/2] Update C files and scripts to kernel version 5.7-rc1
-Bugzilla: 1816750
-RH-Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
-RH-Acked-by: Cathy Avery <cavery@redhat.com>
-
-Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
----
- hv_fcopy_daemon.c   |  38 ++++++++++++--
- hv_get_dhcp_info.sh |   2 +-
- hv_kvp_daemon.c     |  63 ++++++++++++++---------
- hv_set_ifconfig.sh  |   2 +-
- hv_vss_daemon.c     | 118 ++++++++++++++++++++++++++++++++++++++------
- lsvmbus             |  75 +++++++++++++++-------------
- 6 files changed, 220 insertions(+), 78 deletions(-)
-
-Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
----
- hv_fcopy_daemon.c   |  38 ++++++++++++++---
- hv_get_dhcp_info.sh |   2 +-
- hv_kvp_daemon.c     |  63 ++++++++++++++++++----------
- hv_set_ifconfig.sh  |   2 +-
- hv_vss_daemon.c     | 118 +++++++++++++++++++++++++++++++++++++++++++++-------
- lsvmbus             |  75 ++++++++++++++++++---------------
- 6 files changed, 220 insertions(+), 78 deletions(-)
-
-diff --git a/hv_fcopy_daemon.c b/hv_fcopy_daemon.c
-index d78aed8..f40ddaf 100644
---- a/hv_fcopy_daemon.c
-+++ b/hv_fcopy_daemon.c
-@@ -89,6 +89,8 @@ static int hv_start_fcopy(struct hv_start_fcopy *smsg)
- 
- 	error = 0;
- done:
-+	if (error)
-+		target_fname[0] = '\0';
- 	return error;
- }
- 
-@@ -117,15 +119,29 @@ static int hv_copy_data(struct hv_do_fcopy *cpmsg)
- 	return ret;
- }
- 
-+/*
-+ * Reset target_fname to "" in the two below functions for hibernation: if
-+ * the fcopy operation is aborted by hibernation, the daemon should remove the
-+ * partially-copied file; to achieve this, the hv_utils driver always fakes a
-+ * CANCEL_FCOPY message upon suspend, and later when the VM resumes back,
-+ * the daemon calls hv_copy_cancel() to remove the file; if a file is copied
-+ * successfully before suspend, hv_copy_finished() must reset target_fname to
-+ * avoid that the file can be incorrectly removed upon resume, since the faked
-+ * CANCEL_FCOPY message is spurious in this case.
-+ */
- static int hv_copy_finished(void)
- {
- 	close(target_fd);
-+	target_fname[0] = '\0';
- 	return 0;
- }
- static int hv_copy_cancel(void)
- {
- 	close(target_fd);
--	unlink(target_fname);
-+	if (strlen(target_fname) > 0) {
-+		unlink(target_fname);
-+		target_fname[0] = '\0';
-+	}
- 	return 0;
- 
- }
-@@ -140,7 +156,7 @@ void print_usage(char *argv[])
- 
- int main(int argc, char *argv[])
- {
--	int fcopy_fd;
-+	int fcopy_fd = -1;
- 	int error;
- 	int daemonize = 1, long_index = 0, opt;
- 	int version = FCOPY_CURRENT_VERSION;
-@@ -150,7 +166,7 @@ int main(int argc, char *argv[])
- 		struct hv_do_fcopy copy;
- 		__u32 kernel_modver;
- 	} buffer = { };
--	int in_handshake = 1;
-+	int in_handshake;
- 
- 	static struct option long_options[] = {
- 		{"help",	no_argument,	   0,  'h' },
-@@ -179,6 +195,12 @@ int main(int argc, char *argv[])
- 	openlog("HV_FCOPY", 0, LOG_USER);
- 	syslog(LOG_INFO, "starting; pid is:%d", getpid());
- 
-+reopen_fcopy_fd:
-+	if (fcopy_fd != -1)
-+		close(fcopy_fd);
-+	/* Remove any possible partially-copied file on error */
-+	hv_copy_cancel();
-+	in_handshake = 1;
- 	fcopy_fd = open("/dev/vmbus/hv_fcopy", O_RDWR);
- 
- 	if (fcopy_fd < 0) {
-@@ -205,7 +227,7 @@ int main(int argc, char *argv[])
- 		len = pread(fcopy_fd, &buffer, sizeof(buffer), 0);
- 		if (len < 0) {
- 			syslog(LOG_ERR, "pread failed: %s", strerror(errno));
--			exit(EXIT_FAILURE);
-+			goto reopen_fcopy_fd;
- 		}
- 
- 		if (in_handshake) {
-@@ -234,14 +256,20 @@ int main(int argc, char *argv[])
- 			break;
- 
- 		default:
-+			error = HV_E_FAIL;
- 			syslog(LOG_ERR, "Unknown operation: %d",
- 				buffer.hdr.operation);
- 
- 		}
- 
-+		/*
-+		 * pwrite() may return an error due to the faked CANCEL_FCOPY
-+		 * message upon hibernation. Ignore the error by resetting the
-+		 * dev file, i.e. closing and re-opening it.
-+		 */
- 		if (pwrite(fcopy_fd, &error, sizeof(int), 0) != sizeof(int)) {
- 			syslog(LOG_ERR, "pwrite failed: %s", strerror(errno));
--			exit(EXIT_FAILURE);
-+			goto reopen_fcopy_fd;
- 		}
- 	}
- }
-diff --git a/hv_get_dhcp_info.sh b/hv_get_dhcp_info.sh
-index c38686c..2f2a3c7 100644
---- a/hv_get_dhcp_info.sh
-+++ b/hv_get_dhcp_info.sh
-@@ -13,7 +13,7 @@
- #	the script prints the string "Disabled" to stdout.
- #
- # Each Distro is expected to implement this script in a distro specific
--# fashion. For instance on Distros that ship with Network Manager enabled,
-+# fashion. For instance, on Distros that ship with Network Manager enabled,
- # this script can be based on the Network Manager APIs for retrieving DHCP
- # information.
- 
-diff --git a/hv_kvp_daemon.c b/hv_kvp_daemon.c
-index dbf6e8b..ee9c1bb 100644
---- a/hv_kvp_daemon.c
-+++ b/hv_kvp_daemon.c
-@@ -76,7 +76,7 @@ enum {
- 	DNS
- };
- 
--static int in_hand_shake = 1;
-+static int in_hand_shake;
- 
- static char *os_name = "";
- static char *os_major = "";
-@@ -286,7 +286,7 @@ static int kvp_key_delete(int pool, const __u8 *key, int key_size)
- 		 * Found a match; just move the remaining
- 		 * entries up.
- 		 */
--		if (i == num_records) {
-+		if (i == (num_records - 1)) {
- 			kvp_file_info[pool].num_records--;
- 			kvp_update_file(pool);
- 			return 0;
-@@ -700,7 +700,7 @@ static void kvp_get_ipconfig_info(char *if_name,
- 
- 
- 	/*
--	 * Gather the DNS  state.
-+	 * Gather the DNS state.
- 	 * Since there is no standard way to get this information
- 	 * across various distributions of interest; we just invoke
- 	 * an external script that needs to be ported across distros
-@@ -809,7 +809,7 @@ kvp_get_ip_info(int family, char *if_name, int op,
- 	int sn_offset = 0;
- 	int error = 0;
- 	char *buffer;
--	struct hv_kvp_ipaddr_value *ip_buffer;
-+	struct hv_kvp_ipaddr_value *ip_buffer = NULL;
- 	char cidr_mask[5]; /* /xyz */
- 	int weight;
- 	int i;
-@@ -1051,7 +1051,7 @@ static int parse_ip_val_buffer(char *in_buf, int *offset,
- 	char *start;
- 
- 	/*
--	 * in_buf has sequence of characters that are seperated by
-+	 * in_buf has sequence of characters that are separated by
- 	 * the character ';'. The last sequence does not have the
- 	 * terminating ";" character.
- 	 */
-@@ -1178,6 +1178,7 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
- 	FILE *file;
- 	char cmd[PATH_MAX];
- 	char *mac_addr;
-+	int str_len;
- 
- 	/*
- 	 * Set the configuration for the specified interface with
-@@ -1301,8 +1302,18 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
- 	 * invoke the external script to do its magic.
- 	 */
- 
--	snprintf(cmd, sizeof(cmd), KVP_SCRIPTS_PATH "%s %s",
--		 "hv_set_ifconfig", if_file);
-+	str_len = snprintf(cmd, sizeof(cmd), KVP_SCRIPTS_PATH "%s %s",
-+			   "hv_set_ifconfig", if_file);
-+	/*
-+	 * This is a little overcautious, but it's necessary to suppress some
-+	 * false warnings from gcc 8.0.1.
-+	 */
-+	if (str_len <= 0 || (unsigned int)str_len >= sizeof(cmd)) {
-+		syslog(LOG_ERR, "Cmd '%s' (len=%d) may be too long",
-+		       cmd, str_len);
-+		return HV_E_FAIL;
-+	}
-+
- 	if (system(cmd)) {
- 		syslog(LOG_ERR, "Failed to execute cmd '%s'; error: %d %s",
- 				cmd, errno, strerror(errno));
-@@ -1349,7 +1360,7 @@ void print_usage(char *argv[])
- 
- int main(int argc, char *argv[])
- {
--	int kvp_fd, len;
-+	int kvp_fd = -1, len;
- 	int error;
- 	struct pollfd pfd;
- 	char    *p;
-@@ -1375,6 +1386,8 @@ int main(int argc, char *argv[])
- 			daemonize = 0;
- 			break;
- 		case 'h':
-+			print_usage(argv);
-+			exit(0);
- 		default:
- 			print_usage(argv);
- 			exit(EXIT_FAILURE);
-@@ -1387,14 +1400,6 @@ int main(int argc, char *argv[])
- 	openlog("KVP", 0, LOG_USER);
- 	syslog(LOG_INFO, "KVP starting; pid is:%d", getpid());
- 
--	kvp_fd = open("/dev/vmbus/hv_kvp", O_RDWR | O_CLOEXEC);
--
--	if (kvp_fd < 0) {
--		syslog(LOG_ERR, "open /dev/vmbus/hv_kvp failed; error: %d %s",
--			errno, strerror(errno));
--		exit(EXIT_FAILURE);
--	}
--
- 	/*
- 	 * Retrieve OS release information.
- 	 */
-@@ -1410,6 +1415,18 @@ int main(int argc, char *argv[])
- 		exit(EXIT_FAILURE);
- 	}
- 
-+reopen_kvp_fd:
-+	if (kvp_fd != -1)
-+		close(kvp_fd);
-+	in_hand_shake = 1;
-+	kvp_fd = open("/dev/vmbus/hv_kvp", O_RDWR | O_CLOEXEC);
-+
-+	if (kvp_fd < 0) {
-+		syslog(LOG_ERR, "open /dev/vmbus/hv_kvp failed; error: %d %s",
-+		       errno, strerror(errno));
-+		exit(EXIT_FAILURE);
-+	}
-+
- 	/*
- 	 * Register ourselves with the kernel.
- 	 */
-@@ -1443,9 +1460,7 @@ int main(int argc, char *argv[])
- 		if (len != sizeof(struct hv_kvp_msg)) {
- 			syslog(LOG_ERR, "read failed; error:%d %s",
- 			       errno, strerror(errno));
--
--			close(kvp_fd);
--			return EXIT_FAILURE;
-+			goto reopen_kvp_fd;
- 		}
- 
- 		/*
-@@ -1479,7 +1494,7 @@ int main(int argc, char *argv[])
- 		case KVP_OP_GET_IP_INFO:
- 			kvp_ip_val = &hv_msg->body.kvp_ip_val;
- 
--			error =  kvp_mac_to_ip(kvp_ip_val);
-+			error = kvp_mac_to_ip(kvp_ip_val);
- 
- 			if (error)
- 				hv_msg->error = error;
-@@ -1604,13 +1619,17 @@ int main(int argc, char *argv[])
- 			break;
- 		}
- 
--		/* Send the value back to the kernel. */
-+		/*
-+		 * Send the value back to the kernel. Note: the write() may
-+		 * return an error due to hibernation; we can ignore the error
-+		 * by resetting the dev file, i.e. closing and re-opening it.
-+		 */
- kvp_done:
- 		len = write(kvp_fd, hv_msg, sizeof(struct hv_kvp_msg));
- 		if (len != sizeof(struct hv_kvp_msg)) {
- 			syslog(LOG_ERR, "write failed; error: %d %s", errno,
- 			       strerror(errno));
--			exit(EXIT_FAILURE);
-+			goto reopen_kvp_fd;
- 		}
- 	}
- 
-diff --git a/hv_set_ifconfig.sh b/hv_set_ifconfig.sh
-index 18b27cc..3dd064c 100644
---- a/hv_set_ifconfig.sh
-+++ b/hv_set_ifconfig.sh
-@@ -12,7 +12,7 @@
- # be used to configure the interface.
- #
- # Each Distro is expected to implement this script in a distro specific
--# fashion. For instance on Distros that ship with Network Manager enabled,
-+# fashion. For instance, on Distros that ship with Network Manager enabled,
- # this script can be based on the Network Manager APIs for configuring the
- # interface.
- #
-diff --git a/hv_vss_daemon.c b/hv_vss_daemon.c
-index 34031a2..8fe0a5c 100644
---- a/hv_vss_daemon.c
-+++ b/hv_vss_daemon.c
-@@ -36,6 +36,10 @@
- #include <linux/hyperv.h>
- #include <syslog.h>
- #include <getopt.h>
-+#include <stdbool.h>
-+#include <dirent.h>
-+
-+static bool fs_frozen;
- 
- /* Don't use syslog() in the function since that can cause write to disk */
- static int vss_do_freeze(char *dir, unsigned int cmd)
-@@ -51,7 +55,7 @@ static int vss_do_freeze(char *dir, unsigned int cmd)
- 	 * If a partition is mounted more than once, only the first
- 	 * FREEZE/THAW can succeed and the later ones will get
- 	 * EBUSY/EINVAL respectively: there could be 2 cases:
--	 * 1) a user may mount the same partition to differnt directories
-+	 * 1) a user may mount the same partition to different directories
- 	 *  by mistake or on purpose;
- 	 * 2) The subvolume of btrfs appears to have the same partition
- 	 * mounted more than once.
-@@ -68,6 +72,55 @@ static int vss_do_freeze(char *dir, unsigned int cmd)
- 	return !!ret;
- }
- 
-+static bool is_dev_loop(const char *blkname)
-+{
-+	char *buffer;
-+	DIR *dir;
-+	struct dirent *entry;
-+	bool ret = false;
-+
-+	buffer = malloc(PATH_MAX);
-+	if (!buffer) {
-+		syslog(LOG_ERR, "Can't allocate memory!");
-+		exit(1);
-+	}
-+
-+	snprintf(buffer, PATH_MAX, "%s/loop", blkname);
-+	if (!access(buffer, R_OK | X_OK)) {
-+		ret = true;
-+		goto free_buffer;
-+	} else if (errno != ENOENT) {
-+		syslog(LOG_ERR, "Can't access: %s; error:%d %s!",
-+		       buffer, errno, strerror(errno));
-+	}
-+
-+	snprintf(buffer, PATH_MAX, "%s/slaves", blkname);
-+	dir = opendir(buffer);
-+	if (!dir) {
-+		if (errno != ENOENT)
-+			syslog(LOG_ERR, "Can't opendir: %s; error:%d %s!",
-+			       buffer, errno, strerror(errno));
-+		goto free_buffer;
-+	}
-+
-+	while ((entry = readdir(dir)) != NULL) {
-+		if (strcmp(entry->d_name, ".") == 0 ||
-+		    strcmp(entry->d_name, "..") == 0)
-+			continue;
-+
-+		snprintf(buffer, PATH_MAX, "%s/slaves/%s", blkname,
-+			 entry->d_name);
-+		if (is_dev_loop(buffer)) {
-+			ret = true;
-+			break;
-+		}
-+	}
-+	closedir(dir);
-+free_buffer:
-+	free(buffer);
-+	return ret;
-+}
-+
- static int vss_operate(int operation)
- {
- 	char match[] = "/dev/";
-@@ -75,6 +128,7 @@ static int vss_operate(int operation)
- 	struct mntent *ent;
- 	struct stat sb;
- 	char errdir[1024] = {0};
-+	char blkdir[23]; /* /sys/dev/block/XXX:XXX */
- 	unsigned int cmd;
- 	int error = 0, root_seen = 0, save_errno = 0;
- 
-@@ -96,10 +150,15 @@ static int vss_operate(int operation)
- 	while ((ent = getmntent(mounts))) {
- 		if (strncmp(ent->mnt_fsname, match, strlen(match)))
- 			continue;
--		if (stat(ent->mnt_fsname, &sb) == -1)
--			continue;
--		if (S_ISBLK(sb.st_mode) && major(sb.st_rdev) == LOOP_MAJOR)
--			continue;
-+		if (stat(ent->mnt_fsname, &sb)) {
-+			syslog(LOG_ERR, "Can't stat: %s; error:%d %s!",
-+			       ent->mnt_fsname, errno, strerror(errno));
-+		} else {
-+			sprintf(blkdir, "/sys/dev/block/%d:%d",
-+				major(sb.st_rdev), minor(sb.st_rdev));
-+			if (is_dev_loop(blkdir))
-+				continue;
-+		}
- 		if (hasmntopt(ent, MNTOPT_RO) != NULL)
- 			continue;
- 		if (strcmp(ent->mnt_type, "vfat") == 0)
-@@ -109,18 +168,27 @@ static int vss_operate(int operation)
- 			continue;
- 		}
- 		error |= vss_do_freeze(ent->mnt_dir, cmd);
--		if (error && operation == VSS_OP_FREEZE)
--			goto err;
-+		if (operation == VSS_OP_FREEZE) {
-+			if (error)
-+				goto err;
-+			fs_frozen = true;
-+		}
- 	}
- 
- 	endmntent(mounts);
- 
- 	if (root_seen) {
- 		error |= vss_do_freeze("/", cmd);
--		if (error && operation == VSS_OP_FREEZE)
--			goto err;
-+		if (operation == VSS_OP_FREEZE) {
-+			if (error)
-+				goto err;
-+			fs_frozen = true;
-+		}
- 	}
- 
-+	if (operation == VSS_OP_THAW && !error)
-+		fs_frozen = false;
-+
- 	goto out;
- err:
- 	save_errno = errno;
-@@ -129,6 +197,7 @@ err:
- 		endmntent(mounts);
- 	}
- 	vss_operate(VSS_OP_THAW);
-+	fs_frozen = false;
- 	/* Call syslog after we thaw all filesystems */
- 	if (ent)
- 		syslog(LOG_ERR, "FREEZE of %s failed; error:%d %s",
-@@ -150,13 +219,13 @@ void print_usage(char *argv[])
- 
- int main(int argc, char *argv[])
- {
--	int vss_fd, len;
-+	int vss_fd = -1, len;
- 	int error;
- 	struct pollfd pfd;
- 	int	op;
- 	struct hv_vss_msg vss_msg[1];
- 	int daemonize = 1, long_index = 0, opt;
--	int in_handshake = 1;
-+	int in_handshake;
- 	__u32 kernel_modver;
- 
- 	static struct option long_options[] = {
-@@ -172,6 +241,8 @@ int main(int argc, char *argv[])
- 			daemonize = 0;
- 			break;
- 		case 'h':
-+			print_usage(argv);
-+			exit(0);
- 		default:
- 			print_usage(argv);
- 			exit(EXIT_FAILURE);
-@@ -184,6 +255,18 @@ int main(int argc, char *argv[])
- 	openlog("Hyper-V VSS", 0, LOG_USER);
- 	syslog(LOG_INFO, "VSS starting; pid is:%d", getpid());
- 
-+reopen_vss_fd:
-+	if (vss_fd != -1)
-+		close(vss_fd);
-+	if (fs_frozen) {
-+		if (vss_operate(VSS_OP_THAW) || fs_frozen) {
-+			syslog(LOG_ERR, "failed to thaw file system: err=%d",
-+			       errno);
-+			exit(EXIT_FAILURE);
-+		}
-+	}
-+
-+	in_handshake = 1;
- 	vss_fd = open("/dev/vmbus/hv_vss", O_RDWR);
- 	if (vss_fd < 0) {
- 		syslog(LOG_ERR, "open /dev/vmbus/hv_vss failed; error: %d %s",
-@@ -236,8 +319,7 @@ int main(int argc, char *argv[])
- 		if (len != sizeof(struct hv_vss_msg)) {
- 			syslog(LOG_ERR, "read failed; error:%d %s",
- 			       errno, strerror(errno));
--			close(vss_fd);
--			return EXIT_FAILURE;
-+			goto reopen_vss_fd;
- 		}
- 
- 		op = vss_msg->vss_hdr.operation;
-@@ -264,14 +346,18 @@ int main(int argc, char *argv[])
- 		default:
- 			syslog(LOG_ERR, "Illegal op:%d\n", op);
- 		}
-+
-+		/*
-+		 * The write() may return an error due to the faked VSS_OP_THAW
-+		 * message upon hibernation. Ignore the error by resetting the
-+		 * dev file, i.e. closing and re-opening it.
-+		 */
- 		vss_msg->error = error;
- 		len = write(vss_fd, vss_msg, sizeof(struct hv_vss_msg));
- 		if (len != sizeof(struct hv_vss_msg)) {
- 			syslog(LOG_ERR, "write failed; error: %d %s", errno,
- 			       strerror(errno));
--
--			if (op == VSS_OP_FREEZE)
--				vss_operate(VSS_OP_THAW);
-+			goto reopen_vss_fd;
- 		}
- 	}
- 
-diff --git a/lsvmbus b/lsvmbus
-index 55e7374..099f2c4 100644
---- a/lsvmbus
-+++ b/lsvmbus
-@@ -4,10 +4,10 @@
- import os
- from optparse import OptionParser
- 
-+help_msg = "print verbose messages. Try -vv, -vvv for  more verbose messages"
- parser = OptionParser()
--parser.add_option("-v", "--verbose", dest="verbose",
--		   help="print verbose messages. Try -vv, -vvv for \
--			more verbose messages", action="count")
-+parser.add_option(
-+	"-v", "--verbose", dest="verbose", help=help_msg, action="count")
- 
- (options, args) = parser.parse_args()
- 
-@@ -21,27 +21,28 @@ if not os.path.isdir(vmbus_sys_path):
- 	exit(-1)
- 
- vmbus_dev_dict = {
--	'{0e0b6031-5213-4934-818b-38d90ced39db}' : '[Operating system shutdown]',
--	'{9527e630-d0ae-497b-adce-e80ab0175caf}' : '[Time Synchronization]',
--	'{57164f39-9115-4e78-ab55-382f3bd5422d}' : '[Heartbeat]',
--	'{a9a0f4e7-5a45-4d96-b827-8a841e8c03e6}' : '[Data Exchange]',
--	'{35fa2e29-ea23-4236-96ae-3a6ebacba440}' : '[Backup (volume checkpoint)]',
--	'{34d14be3-dee4-41c8-9ae7-6b174977c192}' : '[Guest services]',
--	'{525074dc-8985-46e2-8057-a307dc18a502}' : '[Dynamic Memory]',
--	'{cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a}' : 'Synthetic mouse',
--	'{f912ad6d-2b17-48ea-bd65-f927a61c7684}' : 'Synthetic keyboard',
--	'{da0a7802-e377-4aac-8e77-0558eb1073f8}' : 'Synthetic framebuffer adapter',
--	'{f8615163-df3e-46c5-913f-f2d2f965ed0e}' : 'Synthetic network adapter',
--	'{32412632-86cb-44a2-9b5c-50d1417354f5}' : 'Synthetic IDE Controller',
--	'{ba6163d9-04a1-4d29-b605-72e2ffb1dc7f}' : 'Synthetic SCSI Controller',
--	'{2f9bcc4a-0069-4af3-b76b-6fd0be528cda}' : 'Synthetic fiber channel adapter',
--	'{8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501}' : 'Synthetic RDMA adapter',
--	'{44c4f61d-4444-4400-9d52-802e27ede19f}' : 'PCI Express pass-through',
--	'{276aacf4-ac15-426c-98dd-7521ad3f01fe}' : '[Reserved system device]',
--	'{f8e65716-3cb3-4a06-9a60-1889c5cccab5}' : '[Reserved system device]',
--	'{3375baf4-9e15-4b30-b765-67acb10d607b}' : '[Reserved system device]',
-+	'{0e0b6031-5213-4934-818b-38d90ced39db}': '[Operating system shutdown]',
-+	'{9527e630-d0ae-497b-adce-e80ab0175caf}': '[Time Synchronization]',
-+	'{57164f39-9115-4e78-ab55-382f3bd5422d}': '[Heartbeat]',
-+	'{a9a0f4e7-5a45-4d96-b827-8a841e8c03e6}': '[Data Exchange]',
-+	'{35fa2e29-ea23-4236-96ae-3a6ebacba440}': '[Backup (volume checkpoint)]',
-+	'{34d14be3-dee4-41c8-9ae7-6b174977c192}': '[Guest services]',
-+	'{525074dc-8985-46e2-8057-a307dc18a502}': '[Dynamic Memory]',
-+	'{cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a}': 'Synthetic mouse',
-+	'{f912ad6d-2b17-48ea-bd65-f927a61c7684}': 'Synthetic keyboard',
-+	'{da0a7802-e377-4aac-8e77-0558eb1073f8}': 'Synthetic framebuffer adapter',
-+	'{f8615163-df3e-46c5-913f-f2d2f965ed0e}': 'Synthetic network adapter',
-+	'{32412632-86cb-44a2-9b5c-50d1417354f5}': 'Synthetic IDE Controller',
-+	'{ba6163d9-04a1-4d29-b605-72e2ffb1dc7f}': 'Synthetic SCSI Controller',
-+	'{2f9bcc4a-0069-4af3-b76b-6fd0be528cda}': 'Synthetic fiber channel adapter',
-+	'{8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501}': 'Synthetic RDMA adapter',
-+	'{44c4f61d-4444-4400-9d52-802e27ede19f}': 'PCI Express pass-through',
-+	'{276aacf4-ac15-426c-98dd-7521ad3f01fe}': '[Reserved system device]',
-+	'{f8e65716-3cb3-4a06-9a60-1889c5cccab5}': '[Reserved system device]',
-+	'{3375baf4-9e15-4b30-b765-67acb10d607b}': '[Reserved system device]',
- }
- 
-+
- def get_vmbus_dev_attr(dev_name, attr):
- 	try:
- 		f = open('%s/%s/%s' % (vmbus_sys_path, dev_name, attr), 'r')
-@@ -52,6 +53,7 @@ def get_vmbus_dev_attr(dev_name, attr):
- 
- 	return lines
- 
-+
- class VMBus_Dev:
- 	pass
- 
-@@ -66,12 +68,13 @@ for f in os.listdir(vmbus_sys_path):
- 
- 	chn_vp_mapping = get_vmbus_dev_attr(f, 'channel_vp_mapping')
- 	chn_vp_mapping = [c.strip() for c in chn_vp_mapping]
--	chn_vp_mapping = sorted(chn_vp_mapping,
--		key = lambda c : int(c.split(':')[0]))
-+	chn_vp_mapping = sorted(
-+		chn_vp_mapping, key=lambda c: int(c.split(':')[0]))
- 
--	chn_vp_mapping = ['\tRel_ID=%s, target_cpu=%s' %
--				(c.split(':')[0], c.split(':')[1])
--					for c in chn_vp_mapping]
-+	chn_vp_mapping = [
-+		'\tRel_ID=%s, target_cpu=%s' %
-+		(c.split(':')[0], c.split(':')[1]) for c in chn_vp_mapping
-+	]
- 	d = VMBus_Dev()
- 	d.sysfs_path = '%s/%s' % (vmbus_sys_path, f)
- 	d.vmbus_id = vmbus_id
-@@ -85,7 +88,7 @@ for f in os.listdir(vmbus_sys_path):
- 	vmbus_dev_list.append(d)
- 
- 
--vmbus_dev_list  = sorted(vmbus_dev_list, key = lambda d : int(d.vmbus_id))
-+vmbus_dev_list = sorted(vmbus_dev_list, key=lambda d: int(d.vmbus_id))
- 
- format0 = '%2s: %s'
- format1 = '%2s: Class_ID = %s - %s\n%s'
-@@ -95,9 +98,15 @@ for d in vmbus_dev_list:
- 	if verbose == 0:
- 		print(('VMBUS ID ' + format0) % (d.vmbus_id, d.dev_desc))
- 	elif verbose == 1:
--		print (('VMBUS ID ' + format1) %	\
--			(d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping))
-+		print(
-+			('VMBUS ID ' + format1) %
-+			(d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping)
-+		)
- 	else:
--		print (('VMBUS ID ' + format2) % \
--			(d.vmbus_id, d.class_id, d.dev_desc, \
--			d.device_id, d.sysfs_path, d.chn_vp_mapping))
-+		print(
-+			('VMBUS ID ' + format2) %
-+			(
-+				d.vmbus_id, d.class_id, d.dev_desc,
-+				d.device_id, d.sysfs_path, d.chn_vp_mapping
-+			)
-+		)
--- 
-1.8.3.1
-

SOURCES/hypervkvpd.service

@@ -1,8 +0,0 @@
-[Unit]
-Description=Hyper-V KVP daemon
-BindsTo=sys-devices-virtual-misc-vmbus\x21hv_kvp.device
-After=network.target
-
-[Service]
-Type=simple
-ExecStart=/usr/sbin/hypervkvpd -n

SOURCES/lsvmbus

@@ -1,103 +0,0 @@
-#!/usr/bin/env python
-# SPDX-License-Identifier: GPL-2.0
-
-import os
-from optparse import OptionParser
-
-parser = OptionParser()
-parser.add_option("-v", "--verbose", dest="verbose",
-		   help="print verbose messages. Try -vv, -vvv for \
-			more verbose messages", action="count")
-
-(options, args) = parser.parse_args()
-
-verbose = 0
-if options.verbose is not None:
-	verbose = options.verbose
-
-vmbus_sys_path = '/sys/bus/vmbus/devices'
-if not os.path.isdir(vmbus_sys_path):
-	print "%s doesn't exist: exiting..." % vmbus_sys_path
-	exit(-1)
-
-vmbus_dev_dict = {
-	'{0e0b6031-5213-4934-818b-38d90ced39db}' : '[Operating system shutdown]',
-	'{9527e630-d0ae-497b-adce-e80ab0175caf}' : '[Time Synchronization]',
-	'{57164f39-9115-4e78-ab55-382f3bd5422d}' : '[Heartbeat]',
-	'{a9a0f4e7-5a45-4d96-b827-8a841e8c03e6}' : '[Data Exchange]',
-	'{35fa2e29-ea23-4236-96ae-3a6ebacba440}' : '[Backup (volume checkpoint)]',
-	'{34d14be3-dee4-41c8-9ae7-6b174977c192}' : '[Guest services]',
-	'{525074dc-8985-46e2-8057-a307dc18a502}' : '[Dynamic Memory]',
-	'{cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a}' : 'Synthetic mouse',
-	'{f912ad6d-2b17-48ea-bd65-f927a61c7684}' : 'Synthetic keyboard',
-	'{da0a7802-e377-4aac-8e77-0558eb1073f8}' : 'Synthetic framebuffer adapter',
-	'{f8615163-df3e-46c5-913f-f2d2f965ed0e}' : 'Synthetic network adapter',
-	'{32412632-86cb-44a2-9b5c-50d1417354f5}' : 'Synthetic IDE Controller',
-	'{ba6163d9-04a1-4d29-b605-72e2ffb1dc7f}' : 'Synthetic SCSI Controller',
-	'{2f9bcc4a-0069-4af3-b76b-6fd0be528cda}' : 'Synthetic fiber channel adapter',
-	'{8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501}' : 'Synthetic RDMA adapter',
-	'{44c4f61d-4444-4400-9d52-802e27ede19f}' : 'PCI Express pass-through',
-	'{276aacf4-ac15-426c-98dd-7521ad3f01fe}' : '[Reserved system device]',
-	'{f8e65716-3cb3-4a06-9a60-1889c5cccab5}' : '[Reserved system device]',
-	'{3375baf4-9e15-4b30-b765-67acb10d607b}' : '[Reserved system device]',
-}
-
-def get_vmbus_dev_attr(dev_name, attr):
-	try:
-		f = open('%s/%s/%s' % (vmbus_sys_path, dev_name, attr), 'r')
-		lines = f.readlines()
-		f.close()
-	except IOError:
-		lines = []
-
-	return lines
-
-class VMBus_Dev:
-	pass
-
-
-vmbus_dev_list = []
-
-for f in os.listdir(vmbus_sys_path):
-	vmbus_id = get_vmbus_dev_attr(f, 'id')[0].strip()
-	class_id = get_vmbus_dev_attr(f, 'class_id')[0].strip()
-	device_id = get_vmbus_dev_attr(f, 'device_id')[0].strip()
-	dev_desc = vmbus_dev_dict.get(class_id, 'Unknown')
-
-	chn_vp_mapping = get_vmbus_dev_attr(f, 'channel_vp_mapping')
-	chn_vp_mapping = [c.strip() for c in chn_vp_mapping]
-	chn_vp_mapping = sorted(chn_vp_mapping,
-		key = lambda c : int(c.split(':')[0]))
-
-	chn_vp_mapping = ['\tRel_ID=%s, target_cpu=%s' %
-				(c.split(':')[0], c.split(':')[1])
-					for c in chn_vp_mapping]
-	d = VMBus_Dev()
-	d.sysfs_path = '%s/%s' % (vmbus_sys_path, f)
-	d.vmbus_id = vmbus_id
-	d.class_id = class_id
-	d.device_id = device_id
-	d.dev_desc = dev_desc
-	d.chn_vp_mapping = '\n'.join(chn_vp_mapping)
-	if d.chn_vp_mapping:
-		d.chn_vp_mapping += '\n'
-
-	vmbus_dev_list.append(d)
-
-
-vmbus_dev_list  = sorted(vmbus_dev_list, key = lambda d : int(d.vmbus_id))
-
-format0 = '%2s: %s'
-format1 = '%2s: Class_ID = %s - %s\n%s'
-format2 = '%2s: Class_ID = %s - %s\n\tDevice_ID = %s\n\tSysfs path: %s\n%s'
-
-for d in vmbus_dev_list:
-	if verbose == 0:
-		print ('VMBUS ID ' + format0) % (d.vmbus_id, d.dev_desc)
-	elif verbose == 1:
-		print ('VMBUS ID ' + format1) %	\
-			(d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping)
-	else:
-		print ('VMBUS ID ' + format2) % \
-			(d.vmbus_id, d.class_id, d.dev_desc, \
-			d.device_id, d.sysfs_path, d.chn_vp_mapping)

gating.yaml

@@ -0,0 +1,6 @@
+--- !Policy
+product_versions:
+  - rhel-9
+decision_context: osci_compose_gate
+rules:
+  - !PassingTestCaseRule {test_case_name: 3rd-hyperv-2019-ci.brew-build.tier1.functional}

hpvd-Changes-for-adding-keyfile-support-in-RHEL-specific-.patch

@@ -0,0 +1,67 @@
+From 1df9596722c093afd097fd7a9689092a5cee7d2a Mon Sep 17 00:00:00 2001
+From: Ani Sinha <anisinha@redhat.com>
+Date: Tue, 10 Oct 2023 11:50:30 +0530
+Subject: [PATCH 4/4] Changes for adding keyfile support in RHEL specific
+ script
+
+RH-Author: Ani Sinha <anisinha@redhat.com>
+RH-MergeRequest: 8: hv/hv_kvp_daemon:Support for keyfile based connection profile
+RH-Jira: RHEL-9902
+RH-Acked-by: Cathy Avery <cavery@redhat.com>
+RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
+RH-Commit: [4/4] b60a8d644b0e777373c92f4778c3d4560f6f2642 (anisinha/centos-hyperv-daemons)
+
+Some adjustments to the RHEL specific customization script in order to support
+Network Manager keyfiles. These changes were tested internally by Red Hat QE.
+These changes are mostly trivial and are not pushed upstream at this momemnt.
+
+Jira: https://issues.redhat.com/browse/RHEL-9902
+
+See also https://issues.redhat.com/browse/RHEL-14505
+
+Signed-off-by: Ani Sinha <anisinha@redhat.com>
+---
+ hv_set_ifconfig.sh | 25 ++++++++++++++-----------
+ 1 file changed, 14 insertions(+), 11 deletions(-)
+
+diff --git a/hv_set_ifconfig.sh b/hv_set_ifconfig.sh
+index 9c2ee30..0bdf2bc 100644
+--- a/hv_set_ifconfig.sh
++++ b/hv_set_ifconfig.sh
+@@ -74,19 +74,22 @@
+ # call.
+ #
+ 
++# This is RHEL specific bash script that configures NM keyfiles.
++# ifcfg files passed as the first argument to this script remains untouched.
+ 
++if [ -z "$2" ]; then
++    echo "No input NM keyfile. Exiting!"
++    exit 1
++fi
+ 
+-echo "IPV6INIT=yes" >> $1
+-echo "PEERDNS=yes" >> $1
+-echo "ONBOOT=yes" >> $1
++sed -i '/\[ipv4\]/a ignore-auto-dns=false' $2
++sed -i '/\[connection\]/a autoconnect=true' $2
+ 
+-#Unlike older sysconfig scripts, NetworkManager expects GATEWAYx=ipaddr for all values of x.
+-#So the first gateway is GATEWAY0 instead of GATEWAY. Other values should remain unchanged.
+-#Workaround this by replacing GATEWAY= with GATEWAY0=.
+-sed -i "s/GATEWAY=/GATEWAY0=/" $1
++filename="${2##*/}"
++chmod 600 $2
++cp $2 /etc/NetworkManager/system-connections/
+ 
+-cp $1 /etc/sysconfig/network-scripts/
++nmcli connection load "/etc/NetworkManager/system-connections/${filename}"
++nmcli connection up filename "/etc/NetworkManager/system-connections/${filename}"
+ 
+-filename="${1##*/}"
+-nmcli connection load "/etc/sysconfig/network-scripts/${filename}"
+-nmcli connection up filename "/etc/sysconfig/network-scripts/${filename}"
++exit 0
+-- 
+2.39.3
+

hpvd-Use-filename-for-connection-profile.patch

@@ -1,19 +1,14 @@
-From c04d9b584862ee913720632d7fdf83b79525a7d3 Mon Sep 17 00:00:00 2001
+From 3d234bcdb4d40b42923688514a2fb5d1cb8b3314 Mon Sep 17 00:00:00 2001
 From: Till Maas <timaas@redhat.com>
 Date: Tue, 14 Dec 2021 08:07:40 +0000
 Subject: [PATCH 2/2] Use filename for connection profile
 
-RH-Author: Mohamed Gamal Morsy <mmorsy@redhat.com>
+RH-Author: Till Maas <None>
 RH-MergeRequest: 2: hv_set_ifconfig.sh: Use nmcli commands
-RH-Commit: [2/2] 1b69f98b9c30ee6904475b78f2b93fabe2131074
-RH-Bugzilla: 2056566
+RH-Commit: [2/2] 6b6f37ba159b0614b75fcfc02f0513af116711c2 (timaas/hyperv-daemons)
+RH-Bugzilla: 2026371
 RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
 RH-Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
-
-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2056566
-
-Signed-off-by: Till Maas <tmaas@redhat.com>
-Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
 ---
  hv_set_ifconfig.sh | 5 +++--
  1 file changed, 3 insertions(+), 2 deletions(-)

hpvd-hv-hv_kvp_daemon-Handle-IPv4-and-Ipv6-combination-fo.patch

@@ -0,0 +1,335 @@
+From d252f80372544b9b7e060b90bf5c5b0ccf6093d6 Mon Sep 17 00:00:00 2001
+From: Shradha Gupta <shradhagupta@linux.microsoft.com>
+Date: Fri, 22 Mar 2024 06:46:02 -0700
+Subject: [PATCH 3/4] hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for
+ keyfile format
+
+RH-Author: Ani Sinha <anisinha@redhat.com>
+RH-MergeRequest: 8: hv/hv_kvp_daemon:Support for keyfile based connection profile
+RH-Jira: RHEL-9902
+RH-Acked-by: Cathy Avery <cavery@redhat.com>
+RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
+RH-Commit: [3/4] e164b6951b873467f8c87e0d01b1fd89326aa64e (anisinha/centos-hyperv-daemons)
+
+If the network configuration strings are passed as a combination of IPv4
+and IPv6 addresses, the current KVP daemon does not handle processing for
+the keyfile configuration format.
+With these changes, the keyfile config generation logic scans through the
+list twice to generate IPv4 and IPv6 sections for the configuration files
+to handle this support.
+
+Testcases ran:Rhel 9, Hyper-V VMs
+              (IPv4 only, IPv6 only, IPv4 and IPv6 combination)
+
+Cherry-picked from Linux kernel upstream commit
+f971f6dd3742d2 ("hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format")
+Co-developed-by: Ani Sinha <anisinha@redhat.com>
+Signed-off-by: Ani Sinha <anisinha@redhat.com>
+Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
+Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
+Tested-by: Ani Sinha <anisinha@redhat.com>
+Reviewed-by: Ani Sinha <anisinha@redhat.com>
+Link: https://lore.kernel.org/r/1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com
+Signed-off-by: Wei Liu <wei.liu@kernel.org>
+Message-ID: <1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com>
+---
+ hv_kvp_daemon.c | 213 ++++++++++++++++++++++++++++++++++++++----------
+ 1 file changed, 172 insertions(+), 41 deletions(-)
+
+diff --git a/hv_kvp_daemon.c b/hv_kvp_daemon.c
+index 2f1862e..aa350d8 100644
+--- a/hv_kvp_daemon.c
++++ b/hv_kvp_daemon.c
+@@ -76,6 +76,12 @@ enum {
+ 	DNS
+ };
+ 
++enum {
++	IPV4 = 1,
++	IPV6,
++	IP_TYPE_MAX
++};
++
+ static int in_hand_shake;
+ 
+ static char *os_name = "";
+@@ -102,6 +108,11 @@ static struct utsname uts_buf;
+ 
+ #define MAX_FILE_NAME 100
+ #define ENTRIES_PER_BLOCK 50
++/*
++ * Change this entry if the number of addresses increases in future
++ */
++#define MAX_IP_ENTRIES 64
++#define OUTSTR_BUF_SIZE ((INET6_ADDRSTRLEN + 1) * MAX_IP_ENTRIES)
+ 
+ struct kvp_record {
+ 	char key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+@@ -1171,6 +1182,18 @@ static int process_ip_string(FILE *f, char *ip_string, int type)
+ 	return 0;
+ }
+ 
++int ip_version_check(const char *input_addr)
++{
++	struct in6_addr addr;
++
++	if (inet_pton(AF_INET, input_addr, &addr))
++		return IPV4;
++	else if (inet_pton(AF_INET6, input_addr, &addr))
++		return IPV6;
++
++	return -EINVAL;
++}
++
+ /*
+  * Only IPv4 subnet strings needs to be converted to plen
+  * For IPv6 the subnet is already privided in plen format
+@@ -1197,14 +1220,75 @@ static int kvp_subnet_to_plen(char *subnet_addr_str)
+ 	return plen;
+ }
+ 
++static int process_dns_gateway_nm(FILE *f, char *ip_string, int type,
++				  int ip_sec)
++{
++	char addr[INET6_ADDRSTRLEN], *output_str;
++	int ip_offset = 0, error = 0, ip_ver;
++	char *param_name;
++
++	if (type == DNS)
++		param_name = "dns";
++	else if (type == GATEWAY)
++		param_name = "gateway";
++	else
++		return -EINVAL;
++
++	output_str = (char *)calloc(OUTSTR_BUF_SIZE, sizeof(char));
++	if (!output_str)
++		return -ENOMEM;
++
++	while (1) {
++		memset(addr, 0, sizeof(addr));
++
++		if (!parse_ip_val_buffer(ip_string, &ip_offset, addr,
++					 (MAX_IP_ADDR_SIZE * 2)))
++			break;
++
++		ip_ver = ip_version_check(addr);
++		if (ip_ver < 0)
++			continue;
++
++		if ((ip_ver == IPV4 && ip_sec == IPV4) ||
++		    (ip_ver == IPV6 && ip_sec == IPV6)) {
++			/*
++			 * do a bound check to avoid out-of bound writes
++			 */
++			if ((OUTSTR_BUF_SIZE - strlen(output_str)) >
++			    (strlen(addr) + 1)) {
++				strncat(output_str, addr,
++					OUTSTR_BUF_SIZE -
++					strlen(output_str) - 1);
++				strncat(output_str, ",",
++					OUTSTR_BUF_SIZE -
++					strlen(output_str) - 1);
++			}
++		} else {
++			continue;
++		}
++	}
++
++	if (strlen(output_str)) {
++		/*
++		 * This is to get rid of that extra comma character
++		 * in the end of the string
++		 */
++		output_str[strlen(output_str) - 1] = '\0';
++		error = fprintf(f, "%s=%s\n", param_name, output_str);
++	}
++
++	free(output_str);
++	return error;
++}
++
+ static int process_ip_string_nm(FILE *f, char *ip_string, char *subnet,
+-				int is_ipv6)
++				int ip_sec)
+ {
+ 	char addr[INET6_ADDRSTRLEN];
+ 	char subnet_addr[INET6_ADDRSTRLEN];
+-	int error, i = 0;
++	int error = 0, i = 0;
+ 	int ip_offset = 0, subnet_offset = 0;
+-	int plen;
++	int plen, ip_ver;
+ 
+ 	memset(addr, 0, sizeof(addr));
+ 	memset(subnet_addr, 0, sizeof(subnet_addr));
+@@ -1216,10 +1300,16 @@ static int process_ip_string_nm(FILE *f, char *ip_string, char *subnet,
+ 						       subnet_addr,
+ 						       (MAX_IP_ADDR_SIZE *
+ 							2))) {
+-		if (!is_ipv6)
++		ip_ver = ip_version_check(addr);
++		if (ip_ver < 0)
++			continue;
++
++		if (ip_ver == IPV4 && ip_sec == IPV4)
+ 			plen = kvp_subnet_to_plen((char *)subnet_addr);
+-		else
++		else if (ip_ver == IPV6 && ip_sec == IPV6)
+ 			plen = atoi(subnet_addr);
++		else
++			continue;
+ 
+ 		if (plen < 0)
+ 			return plen;
+@@ -1233,17 +1323,16 @@ static int process_ip_string_nm(FILE *f, char *ip_string, char *subnet,
+ 		memset(subnet_addr, 0, sizeof(subnet_addr));
+ 	}
+ 
+-	return 0;
++	return error;
+ }
+ 
+ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ {
+-	int error = 0;
++	int error = 0, ip_ver;
+ 	char if_filename[PATH_MAX];
+ 	char nm_filename[PATH_MAX];
+ 	FILE *ifcfg_file, *nmfile;
+ 	char cmd[PATH_MAX];
+-	int is_ipv6 = 0;
+ 	char *mac_addr;
+ 	int str_len;
+ 
+@@ -1421,52 +1510,94 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 	if (error)
+ 		goto setval_error;
+ 
+-	if (new_val->addr_family & ADDR_FAMILY_IPV6) {
+-		error = fprintf(nmfile, "\n[ipv6]\n");
+-		if (error < 0)
+-			goto setval_error;
+-		is_ipv6 = 1;
+-	} else {
+-		error = fprintf(nmfile, "\n[ipv4]\n");
+-		if (error < 0)
+-			goto setval_error;
+-	}
+-
+ 	/*
+ 	 * Now we populate the keyfile format
++	 *
++	 * The keyfile format expects the IPv6 and IPv4 configuration in
++	 * different sections. Therefore we iterate through the list twice,
++	 * once to populate the IPv4 section and the next time for IPv6
+ 	 */
++	ip_ver = IPV4;
++	do {
++		if (ip_ver == IPV4) {
++			error = fprintf(nmfile, "\n[ipv4]\n");
++			if (error < 0)
++				goto setval_error;
++		} else {
++			error = fprintf(nmfile, "\n[ipv6]\n");
++			if (error < 0)
++				goto setval_error;
++		}
+ 
+-	if (new_val->dhcp_enabled) {
+-		error = kvp_write_file(nmfile, "method", "", "auto");
+-		if (error < 0)
+-			goto setval_error;
+-	} else {
+-		error = kvp_write_file(nmfile, "method", "", "manual");
++		/*
++		 * Write the configuration for ipaddress, netmask, gateway and
++		 * name services
++		 */
++		error = process_ip_string_nm(nmfile, (char *)new_val->ip_addr,
++					     (char *)new_val->sub_net,
++					     ip_ver);
+ 		if (error < 0)
+ 			goto setval_error;
+-	}
+ 
+-	/*
+-	 * Write the configuration for ipaddress, netmask, gateway and
+-	 * name services
+-	 */
+-	error = process_ip_string_nm(nmfile, (char *)new_val->ip_addr,
+-				     (char *)new_val->sub_net, is_ipv6);
+-	if (error < 0)
+-		goto setval_error;
++		/*
++		 * As dhcp_enabled is only valid for ipv4, we do not set dhcp
++		 * methods for ipv6 based on dhcp_enabled flag.
++		 *
++		 * For ipv4, set method to manual only when dhcp_enabled is
++		 * false and specific ipv4 addresses are configured. If neither
++		 * dhcp_enabled is true and no ipv4 addresses are configured,
++		 * set method to 'disabled'.
++		 *
++		 * For ipv6, set method to manual when we configure ipv6
++		 * addresses. Otherwise set method to 'auto' so that SLAAC from
++		 * RA may be used.
++		 */
++		if (ip_ver == IPV4) {
++			if (new_val->dhcp_enabled) {
++				error = kvp_write_file(nmfile, "method", "",
++						       "auto");
++				if (error < 0)
++					goto setval_error;
++			} else if (error) {
++				error = kvp_write_file(nmfile, "method", "",
++						       "manual");
++				if (error < 0)
++					goto setval_error;
++			} else {
++				error = kvp_write_file(nmfile, "method", "",
++						       "disabled");
++				if (error < 0)
++					goto setval_error;
++			}
++		} else if (ip_ver == IPV6) {
++			if (error) {
++				error = kvp_write_file(nmfile, "method", "",
++						       "manual");
++				if (error < 0)
++					goto setval_error;
++			} else {
++				error = kvp_write_file(nmfile, "method", "",
++						       "auto");
++				if (error < 0)
++					goto setval_error;
++			}
++		}
+ 
+-	/* we do not want ipv4 addresses in ipv6 section and vice versa */
+-	if (is_ipv6 != is_ipv4((char *)new_val->gate_way)) {
+-		error = fprintf(nmfile, "gateway=%s\n", (char *)new_val->gate_way);
++		error = process_dns_gateway_nm(nmfile,
++					       (char *)new_val->gate_way,
++					       GATEWAY, ip_ver);
+ 		if (error < 0)
+ 			goto setval_error;
+-	}
+ 
+-	if (is_ipv6 != is_ipv4((char *)new_val->dns_addr)) {
+-		error = fprintf(nmfile, "dns=%s\n", (char *)new_val->dns_addr);
++		error = process_dns_gateway_nm(nmfile,
++					       (char *)new_val->dns_addr, DNS,
++					       ip_ver);
+ 		if (error < 0)
+ 			goto setval_error;
+-	}
++
++		ip_ver++;
++	} while (ip_ver < IP_TYPE_MAX);
++
+ 	fclose(nmfile);
+ 	fclose(ifcfg_file);
+ 
+-- 
+2.39.3
+

hpvd-hv-hv_kvp_daemon-Some-small-fixes-for-handling-NM-ke.patch

@@ -0,0 +1,100 @@
+From 61d2686d4b36e5a9099d80131044807f69142249 Mon Sep 17 00:00:00 2001
+From: Ani Sinha <anisinha@redhat.com>
+Date: Mon, 16 Oct 2023 19:03:33 +0530
+Subject: [PATCH 2/4] hv/hv_kvp_daemon: Some small fixes for handling NM
+ keyfiles
+
+RH-Author: Ani Sinha <anisinha@redhat.com>
+RH-MergeRequest: 8: hv/hv_kvp_daemon:Support for keyfile based connection profile
+RH-Jira: RHEL-9902
+RH-Acked-by: Cathy Avery <cavery@redhat.com>
+RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
+RH-Commit: [2/4] 1676c48ed1f2d91dd1f8c43f6c8009e3bebf295a (anisinha/centos-hyperv-daemons)
+
+Some small fixes:
+- lets make sure we are not adding ipv4 addresses in ipv6 section in
+  keyfile and vice versa.
+- ADDR_FAMILY_IPV6 is a bit in addr_family. Test that bit instead of
+  checking the whole value of addr_family.
+- Some trivial fixes in hv_set_ifconfig.sh.
+
+These fixes are proposed after doing some internal testing at Red Hat.
+
+Cherry-picked from upstream linux
+kernel commit c3803203bc5ec910a ("hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles")
+CC: Shradha Gupta <shradhagupta@linux.microsoft.com>
+CC: Saurabh Sengar <ssengar@linux.microsoft.com>
+Fixes: 42999c904612 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
+Signed-off-by: Ani Sinha <anisinha@redhat.com>
+Reviewed-by: Shradha Gupta <Shradhagupta@linux.microsoft.com>
+Signed-off-by: Wei Liu <wei.liu@kernel.org>
+Message-ID: <20231016133122.2419537-1-anisinha@redhat.com>
+---
+ hv_kvp_daemon.c    | 20 ++++++++++++--------
+ hv_set_ifconfig.sh |  4 ++--
+ 2 files changed, 14 insertions(+), 10 deletions(-)
+
+diff --git a/hv_kvp_daemon.c b/hv_kvp_daemon.c
+index d50b4e8..2f1862e 100644
+--- a/hv_kvp_daemon.c
++++ b/hv_kvp_daemon.c
+@@ -1421,7 +1421,7 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 	if (error)
+ 		goto setval_error;
+ 
+-	if (new_val->addr_family == ADDR_FAMILY_IPV6) {
++	if (new_val->addr_family & ADDR_FAMILY_IPV6) {
+ 		error = fprintf(nmfile, "\n[ipv6]\n");
+ 		if (error < 0)
+ 			goto setval_error;
+@@ -1455,14 +1455,18 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 	if (error < 0)
+ 		goto setval_error;
+ 
+-	error = fprintf(nmfile, "gateway=%s\n", (char *)new_val->gate_way);
+-	if (error < 0)
+-		goto setval_error;
+-
+-	error = fprintf(nmfile, "dns=%s\n", (char *)new_val->dns_addr);
+-	if (error < 0)
+-		goto setval_error;
++	/* we do not want ipv4 addresses in ipv6 section and vice versa */
++	if (is_ipv6 != is_ipv4((char *)new_val->gate_way)) {
++		error = fprintf(nmfile, "gateway=%s\n", (char *)new_val->gate_way);
++		if (error < 0)
++			goto setval_error;
++	}
+ 
++	if (is_ipv6 != is_ipv4((char *)new_val->dns_addr)) {
++		error = fprintf(nmfile, "dns=%s\n", (char *)new_val->dns_addr);
++		if (error < 0)
++			goto setval_error;
++	}
+ 	fclose(nmfile);
+ 	fclose(ifcfg_file);
+ 
+diff --git a/hv_set_ifconfig.sh b/hv_set_ifconfig.sh
+index 35aae6f..9c2ee30 100644
+--- a/hv_set_ifconfig.sh
++++ b/hv_set_ifconfig.sh
+@@ -53,7 +53,7 @@
+ #                       or "manual" if no boot-time protocol should be used)
+ #
+ # address1=ipaddr1/plen
+-# address=ipaddr2/plen
++# address2=ipaddr2/plen
+ #
+ # gateway=gateway1;gateway2
+ #
+@@ -61,7 +61,7 @@
+ #
+ # [ipv6]
+ # address1=ipaddr1/plen
+-# address2=ipaddr1/plen
++# address2=ipaddr2/plen
+ #
+ # gateway=gateway1;gateway2
+ #
+-- 
+2.39.3
+

hpvd-hv-hv_kvp_daemon-Support-for-keyfile-based-connectio.patch

@@ -0,0 +1,426 @@
+From 626a1af79f67bd9150dd6ff496d0dbbfb93bc320 Mon Sep 17 00:00:00 2001
+From: Shradha Gupta <shradhagupta@linux.microsoft.com>
+Date: Mon, 9 Oct 2023 03:38:40 -0700
+Subject: [PATCH 1/4] hv/hv_kvp_daemon:Support for keyfile based connection
+ profile
+
+RH-Author: Ani Sinha <anisinha@redhat.com>
+RH-MergeRequest: 8: hv/hv_kvp_daemon:Support for keyfile based connection profile
+RH-Jira: RHEL-9902
+RH-Acked-by: Cathy Avery <cavery@redhat.com>
+RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
+RH-Commit: [1/4] 0cb079b0cc30bef47bddd193e262dfa52b7f2874 (anisinha/centos-hyperv-daemons)
+
+Ifcfg config file support in NetworkManger is deprecated. This patch
+provides support for the new keyfile config format for connection
+profiles in NetworkManager. The patch modifies the hv_kvp_daemon code
+to generate the new network configuration in keyfile
+format(.ini-style format) along with a ifcfg format configuration.
+The ifcfg format configuration is also retained to support easy
+backward compatibility for distro vendors. These configurations are
+stored in temp files which are further translated using the
+hv_set_ifconfig.sh script. This script is implemented by individual
+distros based on the network management commands supported.
+For example, RHEL's implementation could be found here:
+https://gitlab.com/redhat/centos-stream/src/hyperv-daemons/-/blob/c9s/hv_set_ifconfig.sh
+Debian's implementation could be found here:
+https://github.com/endlessm/linux/blob/master/debian/cloud-tools/hv_set_ifconfig
+
+The next part of this support is to let the Distro vendors consume
+these modified implementations to the new configuration format.
+
+Cherry-picked from upstream linux
+kernel commit 42999c904612 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
+Tested-on: Rhel9(Hyper-V, Azure)(nm and ifcfg files verified)
+Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
+Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
+Reviewed-by: Ani Sinha <anisinha@redhat.com>
+Signed-off-by: Wei Liu <wei.liu@kernel.org>
+Link: https://lore.kernel.org/r/1696847920-31125-1-git-send-email-shradhagupta@linux.microsoft.com
+---
+ hv_kvp_daemon.c    | 233 +++++++++++++++++++++++++++++++++++++++------
+ hv_set_ifconfig.sh |  30 +++++-
+ 2 files changed, 230 insertions(+), 33 deletions(-)
+
+diff --git a/hv_kvp_daemon.c b/hv_kvp_daemon.c
+index 2ad9af3..d50b4e8 100644
+--- a/hv_kvp_daemon.c
++++ b/hv_kvp_daemon.c
+@@ -1171,12 +1171,79 @@ static int process_ip_string(FILE *f, char *ip_string, int type)
+ 	return 0;
+ }
+ 
++/*
++ * Only IPv4 subnet strings needs to be converted to plen
++ * For IPv6 the subnet is already privided in plen format
++ */
++static int kvp_subnet_to_plen(char *subnet_addr_str)
++{
++	int plen = 0;
++	struct in_addr subnet_addr4;
++
++	/*
++	 * Convert subnet address to binary representation
++	 */
++	if (inet_pton(AF_INET, subnet_addr_str, &subnet_addr4) == 1) {
++		uint32_t subnet_mask = ntohl(subnet_addr4.s_addr);
++
++		while (subnet_mask & 0x80000000) {
++			plen++;
++			subnet_mask <<= 1;
++		}
++	} else {
++		return -1;
++	}
++
++	return plen;
++}
++
++static int process_ip_string_nm(FILE *f, char *ip_string, char *subnet,
++				int is_ipv6)
++{
++	char addr[INET6_ADDRSTRLEN];
++	char subnet_addr[INET6_ADDRSTRLEN];
++	int error, i = 0;
++	int ip_offset = 0, subnet_offset = 0;
++	int plen;
++
++	memset(addr, 0, sizeof(addr));
++	memset(subnet_addr, 0, sizeof(subnet_addr));
++
++	while (parse_ip_val_buffer(ip_string, &ip_offset, addr,
++				   (MAX_IP_ADDR_SIZE * 2)) &&
++				   parse_ip_val_buffer(subnet,
++						       &subnet_offset,
++						       subnet_addr,
++						       (MAX_IP_ADDR_SIZE *
++							2))) {
++		if (!is_ipv6)
++			plen = kvp_subnet_to_plen((char *)subnet_addr);
++		else
++			plen = atoi(subnet_addr);
++
++		if (plen < 0)
++			return plen;
++
++		error = fprintf(f, "address%d=%s/%d\n", ++i, (char *)addr,
++				plen);
++		if (error < 0)
++			return error;
++
++		memset(addr, 0, sizeof(addr));
++		memset(subnet_addr, 0, sizeof(subnet_addr));
++	}
++
++	return 0;
++}
++
+ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ {
+ 	int error = 0;
+-	char if_file[PATH_MAX];
+-	FILE *file;
++	char if_filename[PATH_MAX];
++	char nm_filename[PATH_MAX];
++	FILE *ifcfg_file, *nmfile;
+ 	char cmd[PATH_MAX];
++	int is_ipv6 = 0;
+ 	char *mac_addr;
+ 	int str_len;
+ 
+@@ -1197,7 +1264,7 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 	 * in a given distro to configure the interface and so are free
+ 	 * ignore information that may not be relevant.
+ 	 *
+-	 * Here is the format of the ip configuration file:
++	 * Here is the ifcfg format of the ip configuration file:
+ 	 *
+ 	 * HWADDR=macaddr
+ 	 * DEVICE=interface name
+@@ -1220,6 +1287,32 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 	 * tagged as IPV6_DEFAULTGW and IPV6 NETMASK will be tagged as
+ 	 * IPV6NETMASK.
+ 	 *
++	 * Here is the keyfile format of the ip configuration file:
++	 *
++	 * [ethernet]
++	 * mac-address=macaddr
++	 * [connection]
++	 * interface-name=interface name
++	 *
++	 * [ipv4]
++	 * method=<protocol> (where <protocol> is "auto" if DHCP is configured
++	 *                       or "manual" if no boot-time protocol should be used)
++	 *
++	 * address1=ipaddr1/plen
++	 * address2=ipaddr2/plen
++	 *
++	 * gateway=gateway1;gateway2
++	 *
++	 * dns=dns1;dns2
++	 *
++	 * [ipv6]
++	 * address1=ipaddr1/plen
++	 * address2=ipaddr2/plen
++	 *
++	 * gateway=gateway1;gateway2
++	 *
++	 * dns=dns1;dns2
++	 *
+ 	 * The host can specify multiple ipv4 and ipv6 addresses to be
+ 	 * configured for the interface. Furthermore, the configuration
+ 	 * needs to be persistent. A subsequent GET call on the interface
+@@ -1227,14 +1320,29 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 	 * call.
+ 	 */
+ 
+-	snprintf(if_file, sizeof(if_file), "%s%s%s", KVP_CONFIG_LOC,
+-		"/ifcfg-", if_name);
++	/*
++	 * We are populating both ifcfg and nmconnection files
++	 */
++	snprintf(if_filename, sizeof(if_filename), "%s%s%s", KVP_CONFIG_LOC,
++		 "/ifcfg-", if_name);
+ 
+-	file = fopen(if_file, "w");
++	ifcfg_file = fopen(if_filename, "w");
+ 
+-	if (file == NULL) {
++	if (!ifcfg_file) {
+ 		syslog(LOG_ERR, "Failed to open config file; error: %d %s",
+-				errno, strerror(errno));
++		       errno, strerror(errno));
++		return HV_E_FAIL;
++	}
++
++	snprintf(nm_filename, sizeof(nm_filename), "%s%s%s%s", KVP_CONFIG_LOC,
++		 "/", if_name, ".nmconnection");
++
++	nmfile = fopen(nm_filename, "w");
++
++	if (!nmfile) {
++		syslog(LOG_ERR, "Failed to open config file; error: %d %s",
++		       errno, strerror(errno));
++		fclose(ifcfg_file);
+ 		return HV_E_FAIL;
+ 	}
+ 
+@@ -1248,14 +1356,31 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 		goto setval_error;
+ 	}
+ 
+-	error = kvp_write_file(file, "HWADDR", "", mac_addr);
+-	free(mac_addr);
++	error = kvp_write_file(ifcfg_file, "HWADDR", "", mac_addr);
++	if (error < 0)
++		goto setmac_error;
++
++	error = kvp_write_file(ifcfg_file, "DEVICE", "", if_name);
++	if (error < 0)
++		goto setmac_error;
++
++	error = fprintf(nmfile, "\n[connection]\n");
++	if (error < 0)
++		goto setmac_error;
++
++	error = kvp_write_file(nmfile, "interface-name", "", if_name);
+ 	if (error)
+-		goto setval_error;
++		goto setmac_error;
+ 
+-	error = kvp_write_file(file, "DEVICE", "", if_name);
++	error = fprintf(nmfile, "\n[ethernet]\n");
++	if (error < 0)
++		goto setmac_error;
++
++	error = kvp_write_file(nmfile, "mac-address", "", mac_addr);
+ 	if (error)
+-		goto setval_error;
++		goto setmac_error;
++
++	free(mac_addr);
+ 
+ 	/*
+ 	 * The dhcp_enabled flag is only for IPv4. In the case the host only
+@@ -1263,47 +1388,91 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 	 * proceed to parse and pass the IPv6 information to the
+ 	 * disto-specific script hv_set_ifconfig.
+ 	 */
++
++	/*
++	 * First populate the ifcfg file format
++	 */
+ 	if (new_val->dhcp_enabled) {
+-		error = kvp_write_file(file, "BOOTPROTO", "", "dhcp");
++		error = kvp_write_file(ifcfg_file, "BOOTPROTO", "", "dhcp");
+ 		if (error)
+ 			goto setval_error;
+-
+ 	} else {
+-		error = kvp_write_file(file, "BOOTPROTO", "", "none");
++		error = kvp_write_file(ifcfg_file, "BOOTPROTO", "", "none");
+ 		if (error)
+ 			goto setval_error;
+ 	}
+ 
+-	/*
+-	 * Write the configuration for ipaddress, netmask, gateway and
+-	 * name servers.
+-	 */
+-
+-	error = process_ip_string(file, (char *)new_val->ip_addr, IPADDR);
++	error = process_ip_string(ifcfg_file, (char *)new_val->ip_addr,
++				  IPADDR);
+ 	if (error)
+ 		goto setval_error;
+ 
+-	error = process_ip_string(file, (char *)new_val->sub_net, NETMASK);
++	error = process_ip_string(ifcfg_file, (char *)new_val->sub_net,
++				  NETMASK);
+ 	if (error)
+ 		goto setval_error;
+ 
+-	error = process_ip_string(file, (char *)new_val->gate_way, GATEWAY);
++	error = process_ip_string(ifcfg_file, (char *)new_val->gate_way,
++				  GATEWAY);
+ 	if (error)
+ 		goto setval_error;
+ 
+-	error = process_ip_string(file, (char *)new_val->dns_addr, DNS);
++	error = process_ip_string(ifcfg_file, (char *)new_val->dns_addr, DNS);
+ 	if (error)
+ 		goto setval_error;
+ 
+-	fclose(file);
++	if (new_val->addr_family == ADDR_FAMILY_IPV6) {
++		error = fprintf(nmfile, "\n[ipv6]\n");
++		if (error < 0)
++			goto setval_error;
++		is_ipv6 = 1;
++	} else {
++		error = fprintf(nmfile, "\n[ipv4]\n");
++		if (error < 0)
++			goto setval_error;
++	}
++
++	/*
++	 * Now we populate the keyfile format
++	 */
++
++	if (new_val->dhcp_enabled) {
++		error = kvp_write_file(nmfile, "method", "", "auto");
++		if (error < 0)
++			goto setval_error;
++	} else {
++		error = kvp_write_file(nmfile, "method", "", "manual");
++		if (error < 0)
++			goto setval_error;
++	}
++
++	/*
++	 * Write the configuration for ipaddress, netmask, gateway and
++	 * name services
++	 */
++	error = process_ip_string_nm(nmfile, (char *)new_val->ip_addr,
++				     (char *)new_val->sub_net, is_ipv6);
++	if (error < 0)
++		goto setval_error;
++
++	error = fprintf(nmfile, "gateway=%s\n", (char *)new_val->gate_way);
++	if (error < 0)
++		goto setval_error;
++
++	error = fprintf(nmfile, "dns=%s\n", (char *)new_val->dns_addr);
++	if (error < 0)
++		goto setval_error;
++
++	fclose(nmfile);
++	fclose(ifcfg_file);
+ 
+ 	/*
+ 	 * Now that we have populated the configuration file,
+ 	 * invoke the external script to do its magic.
+ 	 */
+ 
+-	str_len = snprintf(cmd, sizeof(cmd), KVP_SCRIPTS_PATH "%s %s",
+-			   "hv_set_ifconfig", if_file);
++	str_len = snprintf(cmd, sizeof(cmd), KVP_SCRIPTS_PATH "%s %s %s",
++			   "hv_set_ifconfig", if_filename, nm_filename);
+ 	/*
+ 	 * This is a little overcautious, but it's necessary to suppress some
+ 	 * false warnings from gcc 8.0.1.
+@@ -1316,14 +1485,16 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ 
+ 	if (system(cmd)) {
+ 		syslog(LOG_ERR, "Failed to execute cmd '%s'; error: %d %s",
+-				cmd, errno, strerror(errno));
++		       cmd, errno, strerror(errno));
+ 		return HV_E_FAIL;
+ 	}
+ 	return 0;
+-
++setmac_error:
++	free(mac_addr);
+ setval_error:
+ 	syslog(LOG_ERR, "Failed to write config file");
+-	fclose(file);
++	fclose(ifcfg_file);
++	fclose(nmfile);
+ 	return error;
+ }
+ 
+diff --git a/hv_set_ifconfig.sh b/hv_set_ifconfig.sh
+index fe7fccf..35aae6f 100644
+--- a/hv_set_ifconfig.sh
++++ b/hv_set_ifconfig.sh
+@@ -18,12 +18,12 @@
+ #
+ # This example script is based on a RHEL environment.
+ #
+-# Here is the format of the ip configuration file:
++# Here is the ifcfg format of the ip configuration file:
+ #
+ # HWADDR=macaddr
+ # DEVICE=interface name
+ # BOOTPROTO=<protocol> (where <protocol> is "dhcp" if DHCP is configured
+-#                       or "none" if no boot-time protocol should be used)
++# 			or "none" if no boot-time protocol should be used)
+ #
+ # IPADDR0=ipaddr1
+ # IPADDR1=ipaddr2
+@@ -41,6 +41,32 @@
+ # tagged as IPV6_DEFAULTGW and IPV6 NETMASK will be tagged as
+ # IPV6NETMASK.
+ #
++# Here is the keyfile format of the ip configuration file:
++#
++# [ethernet]
++# mac-address=macaddr
++# [connection]
++# interface-name=interface name
++#
++# [ipv4]
++# method=<protocol> (where <protocol> is "auto" if DHCP is configured
++#                       or "manual" if no boot-time protocol should be used)
++#
++# address1=ipaddr1/plen
++# address=ipaddr2/plen
++#
++# gateway=gateway1;gateway2
++#
++# dns=dns1;
++#
++# [ipv6]
++# address1=ipaddr1/plen
++# address2=ipaddr1/plen
++#
++# gateway=gateway1;gateway2
++#
++# dns=dns1;dns2
++#
+ # The host can specify multiple ipv4 and ipv6 addresses to be
+ # configured for the interface. Furthermore, the configuration
+ # needs to be persistent. A subsequent GET call on the interface
+-- 
+2.39.3
+

hpvd-hv_set_ifconfig.sh-Use-nmcli-commands.patch

@@ -1,22 +1,19 @@
-From 2db75ec41c2e346af992f9c00f2e90ed9fec694b Mon Sep 17 00:00:00 2001
+From ac2132ceaeb611c89eacb468a66f1815ee6fe806 Mon Sep 17 00:00:00 2001
 From: Till Maas <timaas@redhat.com>
 Date: Mon, 13 Dec 2021 16:08:42 +0000
 Subject: [PATCH 1/2] hv_set_ifconfig.sh: Use nmcli commands
 
-RH-Author: Mohamed Gamal Morsy <mmorsy@redhat.com>
+RH-Author: Till Maas <None>
 RH-MergeRequest: 2: hv_set_ifconfig.sh: Use nmcli commands
-RH-Commit: [1/2] c045f4c849a7d8841c8ad4b6e4ba63abfb946187
-RH-Bugzilla: 2056566
+RH-Commit: [1/2] fbb64255b1d96babd362391d53529cef0e449296 (timaas/hyperv-daemons)
+RH-Bugzilla: 2026371
 RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
 RH-Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
 
-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2056566
-
 Instead of using deprecated ifup/ifdown commands, use nmcli commands.
 Taking the connection down is not necessary with NM, so don't do it.
 
-Signed-off-by: Till Maas <tmaas@redhat.com>
-Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
+Resolves: #2026371
 ---
  hv_set_ifconfig.sh | 7 ++-----
  1 file changed, 2 insertions(+), 5 deletions(-)

hpvd-redhat-hv_set_if_config-Workaround-for-gateway-numbe.patch

@@ -1,17 +1,17 @@
-From 8acc8ecc93352bfb3d78e8d37c5ed03a4948a39d Mon Sep 17 00:00:00 2001
+From 74730b2187402e29c3c6b4074eae945b7614d1dc Mon Sep 17 00:00:00 2001
 From: Mohammed Gamal <mgamal@redhat.com>
 Date: Tue, 8 Nov 2022 16:20:17 +0100
-Subject: [PATCH] redhat: hv_set_if_config: Workaround for gateway numbering in
- NetworkManager
+Subject: [PATCH 1/3] redhat: hv_set_if_config: Workaround for gateway
+ numbering in NetworkManager
 
 RH-Author: Mohamed Gamal Morsy <mmorsy@redhat.com>
-RH-MergeRequest: 10: redhat: hv_set_if_config: Workaround for gateway numbering in NetworkManager
-RH-Bugzilla: 2150255
-RH-Acked-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
-RH-Acked-by: Jon Maloy <jmaloy@redhat.com>
-RH-Commit: [1/1] a52af3c2a8c4365cbe6777fe1afe4ebcf81954d6
+RH-MergeRequest: 4: redhat: hv_set_if_config: Workaround for gateway numbering in NetworkManager
+RH-Bugzilla: 2122115
+RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
+RH-Acked-by: Cathy Avery <cavery@redhat.com>
+RH-Commit: [1/1] 5fef25a723094255f3cb25beaa4e18f1ec9d339f
 
-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2150255
+Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2122115
 
 Unlike older sysconfig scripts, NetworkManager expects GATEWAYx=ipaddr for all values of x.
 So the first gateway is GATEWAY0 instead of GATEWAY. Other values should remain unchanged.
@@ -42,5 +42,5 @@ index 146829b..fe7fccf 100644
  cp $1 /etc/sysconfig/network-scripts/
  
 -- 
-2.37.3
+2.31.1
 

hpvd-tools-hv-Remove-an-extraneous-the.patch

@@ -0,0 +1,47 @@
+From 18888d66ca55ebefbf36dc74ab25c3958d56789b Mon Sep 17 00:00:00 2001
+From: Mohammed Gamal <mgamal@redhat.com>
+Date: Thu, 17 Nov 2022 18:56:20 +0100
+Subject: [PATCH 2/3] tools: hv: Remove an extraneous "the"
+
+RH-Author: Mohamed Gamal Morsy <mmorsy@redhat.com>
+RH-MergeRequest: 5: Update hyperv-daemons for RHEL-9.2
+RH-Bugzilla: 2139457
+RH-Acked-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
+RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
+RH-Commit: [1/2] 53bf20c6a219a20e7a2ae3986a9b2ed43ac4faac
+
+Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2139457
+
+commit f15f39fabed2248311607445ddfa6dba63abebb9
+Author: Jason Wang <wangborong@cdjrlc.com>
+Date:   Thu Aug 11 21:34:33 2022 +0800
+
+    tools: hv: Remove an extraneous "the"
+
+    There are two "the" in the text. Remove one.
+
+    Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
+    Link: https://lore.kernel.org/r/20220811133433.10175-1-wangborong@cdjrlc.com
+    Signed-off-by: Wei Liu <wei.liu@kernel.org>
+
+Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
+---
+ hv_kvp_daemon.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/hv_kvp_daemon.c b/hv_kvp_daemon.c
+index c06c94d..5f98bee 100644
+--- a/hv_kvp_daemon.c
++++ b/hv_kvp_daemon.c
+@@ -44,7 +44,7 @@
+ 
+ /*
+  * KVP protocol: The user mode component first registers with the
+- * the kernel component. Subsequently, the kernel component requests, data
++ * kernel component. Subsequently, the kernel component requests, data
+  * for the specified keys. In response to this message the user mode component
+  * fills in the value corresponding to the specified key. We overload the
+  * sequence field in the cn_msg header to define our KVP message types.
+-- 
+2.31.1
+

hpvd-tools-hv-kvp-remove-unnecessary-void-conversions.patch

@@ -0,0 +1,53 @@
+From 07081e4a9622c042dec1e3c7ffd47722a6dc0337 Mon Sep 17 00:00:00 2001
+From: Mohammed Gamal <mgamal@redhat.com>
+Date: Thu, 17 Nov 2022 18:58:31 +0100
+Subject: [PATCH 3/3] tools: hv: kvp: remove unnecessary (void*) conversions
+
+RH-Author: Mohamed Gamal Morsy <mmorsy@redhat.com>
+RH-MergeRequest: 5: Update hyperv-daemons for RHEL-9.2
+RH-Bugzilla: 2139457
+RH-Acked-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
+RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
+RH-Commit: [2/2] d3fe2884e899eab164e8b42398db72618b05ec71
+
+Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2139457
+
+commit 2258954234db7530e9d86bb32cd6ad54485ff926
+Author: Zhou jie <zhoujie@nfschina.com>
+Date:   Tue Aug 23 11:45:52 2022 +0800
+
+    tools: hv: kvp: remove unnecessary (void*) conversions
+
+    Remove unnecessary void* type casting.
+
+    Signed-off-by: Zhou jie <zhoujie@nfschina.com>
+    Reviewed-by: Michael Kelley <mikelley@microsoft.com>
+    Link: https://lore.kernel.org/r/20220823034552.8596-1-zhoujie@nfschina.com
+    Signed-off-by: Wei Liu <wei.liu@kernel.org>
+
+Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
+---
+ hv_kvp_daemon.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/hv_kvp_daemon.c b/hv_kvp_daemon.c
+index 5f98bee..2ad9af3 100644
+--- a/hv_kvp_daemon.c
++++ b/hv_kvp_daemon.c
+@@ -772,11 +772,11 @@ static int kvp_process_ip_address(void *addrp,
+ 	const char *str;
+ 
+ 	if (family == AF_INET) {
+-		addr = (struct sockaddr_in *)addrp;
++		addr = addrp;
+ 		str = inet_ntop(family, &addr->sin_addr, tmp, 50);
+ 		addr_length = INET_ADDRSTRLEN;
+ 	} else {
+-		addr6 = (struct sockaddr_in6 *)addrp;
++		addr6 = addrp;
+ 		str = inet_ntop(family, &addr6->sin6_addr.s6_addr, tmp, 50);
+ 		addr_length = INET6_ADDRSTRLEN;
+ 	}
+-- 
+2.31.1
+

hpvd-vmbus_testing-fix-wrong-python-syntax-for-integer-va.patch

@@ -0,0 +1,52 @@
+From 21261cb75d523dd3ac815524e66f53694c1a3c2a Mon Sep 17 00:00:00 2001
+From: Ani Sinha <anisinha@redhat.com>
+Date: Wed, 5 Jul 2023 18:44:34 +0530
+Subject: [PATCH] vmbus_testing: fix wrong python syntax for integer value
+ comparison
+
+RH-Author: Ani Sinha <None>
+RH-MergeRequest: 6: vmbus_testing: fix wrong python syntax for interger value comparison
+RH-Bugzilla: 2218931
+RH-Acked-by: Miroslav Rezanina <mrezanin@redhat.com>
+RH-Commit: [1/1] 2887e0ad51a16a499ebdeac29f3086c8be481e0c (anisinha/centos-hyperv-daemons)
+
+It is incorrect in python to compare integer values using the "is" keyword. The
+"is" keyword in python is used to compare references to two objects, not their
+values. Newer version of python3 (version 3.8) throws a warning when such
+incorrect comparison is made. For value comparison, "==" should be used.
+
+Fix this in the code and suppress the following warning:
+
+/usr/sbin/vmbus_testing:167: SyntaxWarning: "is" with a literal. Did you mean "=="?
+
+RHBZ: 2218931
+Signed-off-by: Ani Sinha <anisinha@redhat.com>
+---
+ vmbus_testing | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/vmbus_testing b/vmbus_testing
+index e721290..4467979 100755
+--- a/vmbus_testing
++++ b/vmbus_testing
+@@ -164,7 +164,7 @@ def recursive_file_lookup(path, file_map):
+ def get_all_devices_test_status(file_map):
+ 
+         for device in file_map:
+-                if (get_test_state(locate_state(device, file_map)) is 1):
++                if (get_test_state(locate_state(device, file_map)) == 1):
+                         print("Testing = ON for: {}"
+                               .format(device.split("/")[5]))
+                 else:
+@@ -203,7 +203,7 @@ def write_test_files(path, value):
+ def set_test_state(state_path, state_value, quiet):
+ 
+         write_test_files(state_path, state_value)
+-        if (get_test_state(state_path) is 1):
++        if (get_test_state(state_path) == 1):
+                 if (not quiet):
+                         print("Testing = ON for device: {}"
+                               .format(state_path.split("/")[5]))
+-- 
+2.39.3
+

hyperv-daemons.spec

@@ -5,7 +5,7 @@
 # Hyper-V FCOPY daemon binary name
 %global hv_fcopy_daemon hypervfcopyd
 # snapshot version
-%global snapver .20180415git
+%global snapver .20190303git
 # use hardened build
 %global _hardened_build 1
 # udev rules prefix
@@ -13,10 +13,9 @@
 
 Name:     hyperv-daemons
 Version:  0
-Release:  0.34%{?snapver}%{?dist}
+Release:  0.43%{?snapver}%{?dist}
 Summary:  Hyper-V daemons suite
 
-Group:    System Environment/Daemons
 License:  GPLv2
 URL:      http://www.kernel.org
 
@@ -45,31 +44,32 @@ Source202:  hypervfcopy.rules
 # HYPERV TOOLS
 Source301:  lsvmbus
 
-# Make lsvmbus Python3 compatible
-Patch0: 0001-tools-hv-update-lsvmbus-to-be-compatible-with-python.patch
+Patch0002: 0002-Do-not-set-NM_CONTROLLED-no.patch
+Patch0004: 0004-Update-C-files-and-scripts-to-kernel-version-5.7-rc1.patch
+Patch0005: 0005-Add-vmbus_testing-tool-build-files.patch
+Patch0006: 0006-tools-hv-change-http-to-https-in-hv_kvp_daemon.c.patch
+# For bz#2026371 - [RHEL9][Hyper-V]The /usr/libexec/hypervkvpd/hv_set_ifconfig need update for RHEL9 since the ifdown/ifup was not supported on RHEL9
+Patch7: hpvd-hv_set_ifconfig.sh-Use-nmcli-commands.patch
+# For bz#2026371 - [RHEL9][Hyper-V]The /usr/libexec/hypervkvpd/hv_set_ifconfig need update for RHEL9 since the ifdown/ifup was not supported on RHEL9
+Patch8: hpvd-Use-filename-for-connection-profile.patch
+# For bz#2122115 - [Hyper-V][RHEL-9] Cannot set gateway properly when set static IPADDR0,NETMASK0,GATEWAY in ifcfg-eth0
+Patch9: hpvd-redhat-hv_set_if_config-Workaround-for-gateway-numbe.patch
+# For bz#2139457 - [Hyper-V][RHEL9.2] Update Hyper-V-Daemons
+Patch10: hpvd-tools-hv-Remove-an-extraneous-the.patch
+# For bz#2139457 - [Hyper-V][RHEL9.2] Update Hyper-V-Daemons
+Patch11: hpvd-tools-hv-kvp-remove-unnecessary-void-conversions.patch
+# For bz#2218931 - [Hyper-V] [RHEL-9] /usr/sbin/vmbus_testing python script prints: "SyntaxWarning: "is" with a literal."
+Patch12: hpvd-vmbus_testing-fix-wrong-python-syntax-for-integer-va.patch
+# For RHEL-9902 - [Hyper-V][RHEL-9] hyperv-daemons write incompatible IPv6 prefix (IPV6NETMASK) in ifcfg
+Patch13: hpvd-hv-hv_kvp_daemon-Support-for-keyfile-based-connectio.patch
+# For RHEL-9902 - [Hyper-V][RHEL-9] hyperv-daemons write incompatible IPv6 prefix (IPV6NETMASK) in ifcfg
+Patch14: hpvd-hv-hv_kvp_daemon-Some-small-fixes-for-handling-NM-ke.patch
+# For RHEL-9902 - [Hyper-V][RHEL-9] hyperv-daemons write incompatible IPv6 prefix (IPV6NETMASK) in ifcfg
+Patch15: hpvd-hv-hv_kvp_daemon-Handle-IPv4-and-Ipv6-combination-fo.patch
+# For RHEL-9902 - [Hyper-V][RHEL-9] hyperv-daemons write incompatible IPv6 prefix (IPV6NETMASK) in ifcfg
+Patch16: hpvd-Changes-for-adding-keyfile-support-in-RHEL-specific-.patch
 
-# Do not set NM_CONTROLED=no
-Patch1: 0002-hv_set_ifconfig_nm_enable.patch
-# For bz#1769920 - [Hyper-V][RHEL8] Running 'systemctl isolate' on any target stops hyperv-daemon services
-Patch2: hpvd-Set-IgnoreOnIsolate-1-in-systemd-units.patch
-# For bz#1816750 - [Hyper-V][RHEL8.3] Update Hyper-V tools
-Patch3: hvd-Update-C-files-and-scripts-to-kernel-version-5.7-rc1.patch
-# For bz#1816750 - [Hyper-V][RHEL8.3] Update Hyper-V tools
-Patch4: hvd-Add-vmbus_testing-tool-build-files.patch
-# For bz#1886104 - [Hyper-V][RHEL8.4] Update Hyper-V-Daemons
-Patch5: hvd-tools-hv-change-http-to-https-in-hv_kvp_daemon.c.patch
-# For bz#2056566 - [RHEL8.6][Hyper-V]The /usr/libexec/hypervkvpd/hv_set_ifconfig need update since the ifdown/ifup was not supported on RHEL8
-Patch6: hpvd-hv_set_ifconfig.sh-Use-nmcli-commands.patch
-# For bz#2056566 - [RHEL8.6][Hyper-V]The /usr/libexec/hypervkvpd/hv_set_ifconfig need update since the ifdown/ifup was not supported on RHEL8
-Patch7: hpvd-Use-filename-for-connection-profile.patch
-# For bz#2115761 - [Hyper-V][RHEL-8] hypervkvpd.service service ordering
-Patch8: hpvd-hypervkvpd.service-ordering-fixes.patch
-# For bz#2115761 - [Hyper-V][RHEL-8] hypervkvpd.service service ordering
-Patch9: hpvd-redhat-Add-ConditionalVirtualization-to-the-rest-of-.patch
-# For bz#2150255 - [Hyper-V][RHEL-8] Cannot set gateway properly when set static IPADDR0,NETMASK0,GATEWAY in ifcfg-eth0 [rhel-8.7.0.z]
-Patch10: hpvd-redhat-hv_set_if_config-Workaround-for-gateway-numbe.patch
-# For bz#2020141 - [Hyper-V][RHEL8.6][ARM64] No hyperv-daemons package built for aarch64 platform
-# Patch6: hpvd-Enable-build-on-aarch64.patch
+# Source-git patches
 
 # Hyper-V is available only on x86 and aarch64 architectures
 # The base empty (a.k.a. virtual) package can not be noarch
@@ -81,6 +81,7 @@ Requires:       hypervvssd = %{version}-%{release}
 Requires:       hypervfcopyd = %{version}-%{release}
 BuildRequires:  gcc
 
+
 %description
 Suite of daemons that are needed when Linux guest
 is running on Windows Host with Hyper-V.
@@ -88,7 +89,6 @@ is running on Windows Host with Hyper-V.
 
 %package -n hypervkvpd
 Summary: Hyper-V key value pair (KVP) daemon
-Group:   System Environment/Daemons
 Requires: %{name}-license = %{version}-%{release}
 BuildRequires: systemd, kernel-headers
 Requires(post):   systemd
@@ -105,7 +105,6 @@ IP injection functionality on the Guest.
 
 %package -n hypervvssd
 Summary: Hyper-V VSS daemon
-Group:   System Environment/Daemons
 Requires: %{name}-license = %{version}-%{release}
 BuildRequires: systemd, kernel-headers
 Requires(post):   systemd
@@ -123,7 +122,6 @@ on the Linux Guest.
 
 %package -n hypervfcopyd
 Summary: Hyper-V FCOPY daemon
-Group:   System Environment/Daemons
 Requires: %{name}-license = %{version}-%{release}
 BuildRequires: systemd, kernel-headers
 Requires(post):   systemd
@@ -140,7 +138,6 @@ from Windows Host.
 
 %package license
 Summary:    License of the Hyper-V daemons suite
-Group:      Applications/System
 BuildArch:  noarch
 
 %description license
@@ -148,7 +145,6 @@ Contains license of the Hyper-V daemons suite.
 
 %package -n hyperv-tools
 Summary:    Tools for Hyper-V guests
-Group:      Applications/System
 BuildArch:  noarch
 
 %description -n hyperv-tools
@@ -172,32 +168,34 @@ cp -pvL %{SOURCE201} hypervfcopyd.service
 cp -pvL %{SOURCE202} hypervfcopy.rules
 
 cp -pvL %{SOURCE301} lsvmbus
-%patch0 -p3 -b .lsvmbus_python3
 
-cp -pvL %{SOURCE4} hv_set_ifconfig.sh
-%patch1 -p0 -b .hv_set_ifconfig_nm_enable
-%patch2 -p1
-%patch3 -p1
-%patch4 -p1
-%patch5 -p1
-%patch6 -p1
+%patch0002 -p1
+%patch0004 -p1
+%patch0005 -p1
+%patch0006 -p1
 %patch7 -p1
 %patch8 -p1
 %patch9 -p1
 %patch10 -p1
+%patch11 -p1
+%patch12 -p1
+%patch13 -p1
+%patch14 -p1
+%patch15 -p1
+%patch16 -p1
 
 %build
 # HYPERV KVP DAEMON
-gcc $RPM_OPT_FLAGS -c hv_kvp_daemon.c
-gcc $RPM_LD_FLAGS  hv_kvp_daemon.o -o %{hv_kvp_daemon}
+%{__cc} $RPM_OPT_FLAGS -c hv_kvp_daemon.c
+%{__cc} $RPM_LD_FLAGS  hv_kvp_daemon.o -o %{hv_kvp_daemon}
 
 # HYPERV VSS DAEMON
-gcc $RPM_OPT_FLAGS -c hv_vss_daemon.c
-gcc $RPM_LD_FLAGS hv_vss_daemon.o -o %{hv_vss_daemon}
+%{__cc} $RPM_OPT_FLAGS -c hv_vss_daemon.c
+%{__cc} $RPM_LD_FLAGS hv_vss_daemon.o -o %{hv_vss_daemon}
 
 # HYPERV FCOPY DAEMON
-gcc $RPM_OPT_FLAGS -c hv_fcopy_daemon.c
-gcc $RPM_LD_FLAGS hv_fcopy_daemon.o -o %{hv_fcopy_daemon}
+%{__cc} $RPM_OPT_FLAGS -c hv_fcopy_daemon.c
+%{__cc} $RPM_LD_FLAGS hv_fcopy_daemon.o -o %{hv_fcopy_daemon}
 
 %install
 rm -rf %{buildroot}
@@ -302,49 +300,83 @@ fi
 %{_sbindir}/vmbus_testing
 
 %changelog
-* Mon Dec 05 2022 Jon Maloy <jmaloy@redhat.com> - 0-0.34.20180415git.el8_7
-- hpvd-redhat-hv_set_if_config-Workaround-for-gateway-numbe.patch [bz#2150255]
-- Resolves: bz#2150255
-  ([Hyper-V][RHEL-8] Cannot set gateway properly when set static IPADDR0,NETMASK0,GATEWAY in ifcfg-eth0 [rhel-8.7.0.z])
+* Thu Apr 25 2024 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.43.20190303git
+- hpvd-hv-hv_kvp_daemon-Support-for-keyfile-based-connectio.patch [RHEL-9902]
+- hpvd-hv-hv_kvp_daemon-Some-small-fixes-for-handling-NM-ke.patch [RHEL-9902]
+- hpvd-hv-hv_kvp_daemon-Handle-IPv4-and-Ipv6-combination-fo.patch [RHEL-9902]
+- hpvd-Changes-for-adding-keyfile-support-in-RHEL-specific-.patch [RHEL-9902]
+- Resolves: RHEL-9902
+  ([Hyper-V][RHEL-9] hyperv-daemons write incompatible IPv6 prefix (IPV6NETMASK) in ifcfg)
 
-* Tue Aug 16 2022 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.33.20180415git
-- hpvd-hypervkvpd.service-ordering-fixes.patch [bz#2115761]
-- hpvd-redhat-Add-ConditionalVirtualization-to-the-rest-of-.patch [bz#2115761]
-- Resolves: bz#2115761
-  ([Hyper-V][RHEL-8] hypervkvpd.service service ordering)
+* Mon Jul 10 2023 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.42.20190303git
+- hpvd-vmbus_testing-fix-wrong-python-syntax-for-integer-va.patch [bz#2218931]
+- Resolves: bz#2218931
+  ([Hyper-V] [RHEL-9] /usr/sbin/vmbus_testing python script prints: "SyntaxWarning: "is" with a literal.")
 
-* Tue Mar 22 2022 Jon Maloy <jmaloy@redhat.com> - 0-0.32.20180415git.el8
-- hpvd-hv_set_ifconfig.sh-Use-nmcli-commands.patch [bz#2065202]
-- hpvd-Use-filename-for-connection-profile.patch [bz#2065202]
-- Resolves: bz#2065202
-  ([RHEL8.6][Hyper-V]The /usr/libexec/hypervkvpd/hv_set_ifconfig need update since the ifdown/ifup was not supported on RHEL8 [rhel-8.7.0])
+* Mon Nov 21 2022 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.41.20190303git
+- hpvd-redhat-hv_set_if_config-Workaround-for-gateway-numbe.patch [bz#2122115]
+- hpvd-tools-hv-Remove-an-extraneous-the.patch [bz#2139457]
+- hpvd-tools-hv-kvp-remove-unnecessary-void-conversions.patch [bz#2139457]
+- Resolves: bz#2122115
+  ([Hyper-V][RHEL-9] Cannot set gateway properly when set static IPADDR0,NETMASK0,GATEWAY in ifcfg-eth0)
+- Resolves: bz#2139457
+  ([Hyper-V][RHEL9.2] Update Hyper-V-Daemons)
 
-* Wed Nov 10 2021 Jon Maloy <jmaloy@redhat.com> - 0-0.31.20180415git.el8
-- hpvd-Enable-build-on-aarch64.patch [bz#2020141]
-- Resolves: bz#2020141
-  ([Hyper-V][RHEL8.6][ARM64] No hyperv-daemons package built for aarch64 platform)
+* Fri Jul 29 2022 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.40.20190303git
+- hpvd-hypervkvpd.service-ordering-fixes.patch [bz#2103188]
+- Resolves: bz#2103188
+  ([Hyper-V][RHEL-9] hypervkvpd.service service ordering)
 
-* Thu Dec 03 2020 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.30.20180415git.el8
-- hvd-tools-hv-change-http-to-https-in-hv_kvp_daemon.c.patch [bz#1886104]
-- Resolves: bz#1886104
-  ([Hyper-V][RHEL8.4] Update Hyper-V-Daemons)
+* Wed Dec 15 2021 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.39.20190303git
+- hpvd-hv_set_ifconfig.sh-Use-nmcli-commands.patch [bz#2026371]
+- hpvd-Use-filename-for-connection-profile.patch [bz#2026371]
+- Resolves: bz#2026371
+  ([RHEL9][Hyper-V]The /usr/libexec/hypervkvpd/hv_set_ifconfig need update for RHEL9 since the ifdown/ifup was not supported on RHEL9)
 
-* Wed Apr 15 2020 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.29.20180415git.el8
-- hvd-Update-C-files-and-scripts-to-kernel-version-5.7-rc1.patch [bz#1816750]
-- hvd-Add-vmbus_testing-tool-build-files.patch [bz#1816750]
-- Resolves: bz#1816750
-  ([Hyper-V][RHEL8.3] Update Hyper-V tools)
+* Mon Nov 08 2021 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.38.20190303git
+- hpvd-Enable-build-on-aarch64.patch [bz#2020148]
+- Resolves: bz#2020148
+  ([Hyper-V][RHEL9.0][ARM] No hyperv-daemons package built for aarch64 platform)
 
-* Tue Nov 19 2019 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.28.20180415git.el8
-- hpvd-Set-IgnoreOnIsolate-1-in-systemd-units.patch [bz#1769920]
-- Resolves: bz#1769920
-  ([Hyper-V][RHEL8] Running 'systemctl isolate' on any target stops hyperv-daemon services)
+* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 0-0.37.20190303git
+- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
+  Related: rhbz#1991688
 
-* Mon Sep 03 2018 Vitaly Kuznetsov <vkuznets@redhat.com> - 0-0.27.20180415git
-- Do not set NM_CONTROLLED=no (#1624355)
+* Mon May 10 2021 Miroslav Rezanina <mrezanin@redhat.com> - 0-0.36.20190303git
+- Synchronize RHEL 8 changes [rhbz#1957651]
+- Resolves: rhbz#1957651
+  ([Hyper-V][RHEL-9] Update build to rhel format and syncup RHEL 8 content for hyperv-daemons.)
 
-* Wed Aug 01 2018 Charalampos Stratakis <cstratak@redhat.com> - 0-0.26.20180415git
-- Fix python shebangs
+* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 0-0.35.20190303git
+- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
+
+* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 0-0.34.20190303git
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0-0.33.20190303git
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Wed Jan 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 0-0.32.20190303git
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Wed Jan 15 2020 Tom Stellard <tstellar@redhat.com> - 0-0.31.20190303git
+- Use __cc macro instead of hard-coding gcc
+
+* Fri Nov 08 2019 Vitaly Kuznetsov <vkuznets@redhat.com> - 0-0.30.20190303git
+- Rebase to 5.4-rc6
+- Add IgnoreOnIsolate to systemd units
+
+* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0-0.29.20190303git
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Fri Mar 15 2019 Vitaly Kuznetsov <vkuznets@redhat.com> - 0-0.28.20190303git
+- Rebase to 5.0
+
+* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org> - 0-0.27.20180415git
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 0-0.26.20180415git
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
 
 * Mon Jun 11 2018 Vitaly Kuznetsov <vkuznets@redhat.com> - 0-0.25.20180415git
 - Switch lsvmbus to Python3

hypervfcopyd.service

@@ -1,6 +1,7 @@
 [Unit]
 Description=Hyper-V FCOPY daemon
 BindsTo=sys-devices-virtual-misc-vmbus\x21hv_fcopy.device
+IgnoreOnIsolate=1
 
 [Service]
 ExecStart=/usr/sbin/hypervfcopyd -n

hypervkvpd.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Hyper-V KVP daemon
+ConditionVirtualization=microsoft
+BindsTo=sys-devices-virtual-misc-vmbus\x21hv_kvp.device
+After=sys-devices-virtual-misc-vmbus\x21hv_kvp.device
+RequiresMountsFor=/var/lib/hyperv
+Before=cloud-init-local.service
+IgnoreOnIsolate=1
+
+[Service]
+Type=simple
+ExecStart=/usr/sbin/hypervkvpd -n

hypervvssd.service

@@ -1,6 +1,7 @@
 [Unit]
 Description=Hyper-V VSS daemon
 BindsTo=sys-devices-virtual-misc-vmbus\x21hv_vss.device
+IgnoreOnIsolate=1
 
 [Service]
 ExecStart=/usr/sbin/hypervvssd -n

sources

@@ -0,0 +1,8 @@
+SHA512 (hv_get_dhcp_info.sh) = 4a9503f2a368cc078e00cdc7d3313d3e6f9c8e18c68e6b9ba0a1b6e4c8c0dbf8183d33158588097b275b7afba08d548187e27cdde05e3321065251389b1bdc63
+SHA512 (hv_get_dns_info.sh) = 876effabea3ffe1daaa9c68dfa9b254d740003716f081aa524a1bdbd81724f744bd9dd900f2fdd94764d67584d3e853b26576aa8b53d6f6df94b12702a167428
+SHA512 (hv_kvp_daemon.c) = a9c1d1f2d4829d7796fb16b3fe36d2707df0fb6beb430b8b778ee6c65734a04fc9fd5bd22cb63627cb9574a1d7afa18fe3e1d26b56e0ec49130e2b40d1845133
+SHA512 (hv_set_ifconfig.sh) = da6bbd90a265ebab7f63985c57ba8a19c1a9e3ca1e15f361663ec166c85647ecfb89e805a9b51134ebcd896b98a9dc4e2104665d3a0d2f3b5494e61cffbd8d86
+SHA512 (hv_vss_daemon.c) = bf18b77a2bde83a41837744b578f225f97caae47f2c82e83567a11e87a449d1814586d0a9aa149b4b0512710dfa0db6ebe14c7079740d99cd208f9b670f62164
+SHA512 (hv_fcopy_daemon.c) = d69d8fb82f84d2044e6e02a104c7aa3da8c09e8f7d7b42e7d79ba6ff52a01ff4602f0dea6bf2189709c568c280393e160aaa750c539a3ac7a1282bd401be2c42
+SHA512 (COPYING) = fbb1e0f29741e900a81ccbe76102103365423d310e9987dfc5858174999911037a9ad48270a3d0b86f245e91868ed73813ca273584be43816f53517858f3aabd
+SHA512 (lsvmbus) = 43be38dd1ef8b2864a3f37a29a440478a69879ea4882a7ded8e42c2464b7325c1b0da3c7e001154da5f892641b6f60d75e7dbab287a9e9cfcf9567ea9eeec8e0