From 16e60d9443ebe87df0cecac9a22df6e0440b805d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ale=C5=A1=20Nesrsta?= Date: Fri, 12 Apr 2013 20:42:46 +0200 Subject: [PATCH 292/471] Fix handling of split transfers. --- ChangeLog | 4 ++++ grub-core/bus/usb/ehci.c | 25 ++++++++++------------- grub-core/bus/usb/usbhub.c | 50 +++++++++++++++++++++++++++++++++++++++------- include/grub/usb.h | 4 ++-- 4 files changed, 59 insertions(+), 24 deletions(-) diff --git a/ChangeLog b/ChangeLog index 79563b8..e8e4569 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,7 @@ +2013-04-12 Aleš Nesrsta + + Fix handling of split transfers. + 2013-04-12 Vladimir Serbinenko * grub-core/net/http.c: Fix bad free. diff --git a/grub-core/bus/usb/ehci.c b/grub-core/bus/usb/ehci.c index e902fcd..18b12b2 100644 --- a/grub-core/bus/usb/ehci.c +++ b/grub-core/bus/usb/ehci.c @@ -798,7 +798,7 @@ grub_ehci_pci_iter (grub_pci_device_t dev, grub_pci_id_t pciid, /* Set ownership of root hub ports to EHCI */ grub_ehci_oper_write32 (e, GRUB_EHCI_CONFIG_FLAG, GRUB_EHCI_CF_EHCI_OWNER); - /* Enable asynchronous list */ + /* Enable both lists */ grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND, GRUB_EHCI_CMD_AS_ENABL | GRUB_EHCI_CMD_PS_ENABL @@ -942,9 +942,9 @@ grub_ehci_setup_qh (grub_ehci_qh_t qh, grub_usb_transfer_t transfer) * SplitCompletionMask - AFAIK it is ignored in asynchronous list, * InterruptScheduleMask - AFAIK it should be zero in async. list */ ep_cap |= GRUB_EHCI_MULT_THREE; - ep_cap |= (transfer->dev->port << GRUB_EHCI_DEVPORT_OFF) + ep_cap |= (transfer->dev->split_hubport << GRUB_EHCI_DEVPORT_OFF) & GRUB_EHCI_DEVPORT_MASK; - ep_cap |= (transfer->dev->hubaddr << GRUB_EHCI_HUBADDR_OFF) + ep_cap |= (transfer->dev->split_hubaddr << GRUB_EHCI_HUBADDR_OFF) & GRUB_EHCI_HUBADDR_MASK; if (transfer->dev->speed == GRUB_USB_SPEED_LOW && transfer->type != GRUB_USB_TRANSACTION_TYPE_CONTROL) @@ -1261,16 +1261,6 @@ grub_ehci_setup_transfer (grub_usb_controller_t dev, /* XXX: Fix it: Currently we don't do anything to restart EHCI */ return GRUB_USB_ERR_INTERNAL; - /* Check if transfer is not high speed and connected to root hub. - * It should not happened but... */ - if ((transfer->dev->speed != GRUB_USB_SPEED_HIGH) - && !transfer->dev->hubaddr) - { - grub_error (GRUB_USB_ERR_BADDEVICE, - "FULL/LOW speed device on EHCI port!?!"); - return GRUB_USB_ERR_BADDEVICE; - } - /* Allocate memory for controller transfer data. */ cdata = grub_malloc (sizeof (*cdata)); if (!cdata) @@ -1887,13 +1877,18 @@ grub_ehci_fini_hw (int noreturn __attribute__ ((unused))) /* We should disable all EHCI HW to prevent any DMA access etc. */ for (e = ehci; e; e = e->next) { + /* Disable both lists */ + grub_ehci_oper_write32 (e, GRUB_EHCI_COMMAND, + ~(GRUB_EHCI_CMD_AS_ENABL | GRUB_EHCI_CMD_PS_ENABL) + & grub_ehci_oper_read32 (e, GRUB_EHCI_COMMAND)); + /* Check if EHCI is halted and halt it if not */ if (grub_ehci_halt (e) != GRUB_USB_ERR_NONE) - grub_error (GRUB_ERR_TIMEOUT, "restore_hw: EHCI halt timeout"); + grub_error (GRUB_ERR_TIMEOUT, "fini_hw: EHCI halt timeout"); /* Reset EHCI */ if (grub_ehci_reset (e) != GRUB_USB_ERR_NONE) - grub_error (GRUB_ERR_TIMEOUT, "restore_hw: EHCI reset timeout"); + grub_error (GRUB_ERR_TIMEOUT, "fini_hw: EHCI reset timeout"); } return GRUB_USB_ERR_NONE; diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c index 6fc9d02..e3b7d40 100644 --- a/grub-core/bus/usb/usbhub.c +++ b/grub-core/bus/usb/usbhub.c @@ -49,7 +49,7 @@ static grub_usb_controller_dev_t grub_usb_list; static grub_usb_device_t grub_usb_hub_add_dev (grub_usb_controller_t controller, grub_usb_speed_t speed, - int port, int hubaddr) + int split_hubport, int split_hubaddr) { grub_usb_device_t dev; int i; @@ -63,8 +63,8 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, dev->controller = *controller; dev->speed = speed; - dev->port = port; - dev->hubaddr = hubaddr; + dev->split_hubport = split_hubport; + dev->split_hubaddr = split_hubaddr; err = grub_usb_device_initialize (dev); if (err) @@ -108,8 +108,8 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, grub_dprintf ("usb", "Added new usb device: %p, addr=%d\n", dev, i); - grub_dprintf ("usb", "speed=%d, port=%d, hubaddr=%d\n", - speed, port, hubaddr); + grub_dprintf ("usb", "speed=%d, split_hubport=%d, split_hubaddr=%d\n", + speed, split_hubport, split_hubaddr); /* Wait "recovery interval", spec. says 2ms */ grub_millisleep (2); @@ -219,7 +219,12 @@ attach_root_port (struct grub_usb_hub *hub, int portno, grub_boot_time ("Port enabled"); /* Enable the port and create a device. */ - dev = grub_usb_hub_add_dev (hub->controller, speed, portno, 0); + /* High speed device needs not transaction translation + and full/low speed device cannot be connected to EHCI root hub + and full/low speed device connected to OHCI/UHCI needs not + transaction translation - e.g. hubport and hubaddr should be + always none (zero) for any device connected to any root hub. */ + dev = grub_usb_hub_add_dev (hub->controller, speed, 0, 0); hub->controller->dev->pending_reset = 0; npending--; if (! dev) @@ -593,6 +598,8 @@ poll_nonroot_hub (grub_usb_device_t dev) { grub_usb_speed_t speed; grub_usb_device_t next_dev; + int split_hubport = 0; + int split_hubaddr = 0; /* Determine the device speed. */ if (status & GRUB_USB_HUB_STATUS_PORT_LOWSPEED) @@ -608,8 +615,37 @@ poll_nonroot_hub (grub_usb_device_t dev) /* Wait a recovery time after reset, spec. says 10ms */ grub_millisleep (10); + /* Find correct values for SPLIT hubport and hubaddr */ + if (speed == GRUB_USB_SPEED_HIGH) + { + /* HIGH speed device needs not transaction translation */ + split_hubport = 0; + split_hubaddr = 0; + } + else + /* FULL/LOW device needs hub port and hub address + for transaction translation (if connected to EHCI) */ + if (dev->speed == GRUB_USB_SPEED_HIGH) + { + /* This port is the first FULL/LOW speed port + in the chain from root hub. Attached device + should use its port number and hub address */ + split_hubport = i; + split_hubaddr = dev->addr; + } + else + { + /* This port is NOT the first FULL/LOW speed port + in the chain from root hub. Attached device + should use values inherited from some parent + HIGH speed hub - if any. */ + split_hubport = dev->split_hubport; + split_hubaddr = dev->split_hubaddr; + } + /* Add the device and assign a device address to it. */ - next_dev = grub_usb_hub_add_dev (&dev->controller, speed, i, dev->addr); + next_dev = grub_usb_hub_add_dev (&dev->controller, speed, + split_hubport, split_hubaddr); if (dev->controller.dev->pending_reset) { dev->controller.dev->pending_reset = 0; diff --git a/include/grub/usb.h b/include/grub/usb.h index 9e2c221..1cc9942 100644 --- a/include/grub/usb.h +++ b/include/grub/usb.h @@ -225,9 +225,9 @@ struct grub_usb_device struct grub_usb_desc_endp *hub_endpoint; /* EHCI Split Transfer information */ - int port; + int split_hubport; - int hubaddr; + int split_hubaddr; }; -- 1.8.2.1