glibc/SOURCES/glibc-rh1991001-13.patch

194 lines
7.7 KiB
Diff

commit f4f8f4d4e0f92488431b268c8cd9555730b9afe9
Author: Szabolcs Nagy <szabolcs.nagy@arm.com>
Date: Wed Dec 30 19:19:37 2020 +0000
elf: Use relaxed atomics for racy accesses [BZ #19329]
This is a follow up patch to the fix for bug 19329. This adds relaxed
MO atomics to accesses that were previously data races but are now
race conditions, and where relaxed MO is sufficient.
The race conditions all follow the pattern that the write is behind the
dlopen lock, but a read can happen concurrently (e.g. during tls access)
without holding the lock. For slotinfo entries the read value only
matters if it reads from a synchronized write in dlopen or dlclose,
otherwise the related dtv entry is not valid to access so it is fine
to leave it in an inconsistent state. The same applies for
GL(dl_tls_max_dtv_idx) and GL(dl_tls_generation), but there the
algorithm relies on the fact that the read of the last synchronized
write is an increasing value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
diff --git a/elf/dl-close.c b/elf/dl-close.c
index 1ece0ae1dd062d1e..7d2dc2272cd643f5 100644
--- a/elf/dl-close.c
+++ b/elf/dl-close.c
@@ -79,9 +79,10 @@ remove_slotinfo (size_t idx, struct dtv_slotinfo_list *listp, size_t disp,
{
assert (old_map->l_tls_modid == idx);
- /* Mark the entry as unused. */
- listp->slotinfo[idx - disp].gen = GL(dl_tls_generation) + 1;
- listp->slotinfo[idx - disp].map = NULL;
+ /* Mark the entry as unused. These can be read concurrently. */
+ atomic_store_relaxed (&listp->slotinfo[idx - disp].gen,
+ GL(dl_tls_generation) + 1);
+ atomic_store_relaxed (&listp->slotinfo[idx - disp].map, NULL);
}
/* If this is not the last currently used entry no need to look
@@ -96,8 +97,8 @@ remove_slotinfo (size_t idx, struct dtv_slotinfo_list *listp, size_t disp,
if (listp->slotinfo[idx - disp].map != NULL)
{
- /* Found a new last used index. */
- GL(dl_tls_max_dtv_idx) = idx;
+ /* Found a new last used index. This can be read concurrently. */
+ atomic_store_relaxed (&GL(dl_tls_max_dtv_idx), idx);
return true;
}
}
@@ -571,7 +572,9 @@ _dl_close_worker (struct link_map *map, bool force)
GL(dl_tls_dtv_slotinfo_list), 0,
imap->l_init_called))
/* All dynamically loaded modules with TLS are unloaded. */
- GL(dl_tls_max_dtv_idx) = GL(dl_tls_static_nelem);
+ /* Can be read concurrently. */
+ atomic_store_relaxed (&GL(dl_tls_max_dtv_idx),
+ GL(dl_tls_static_nelem));
if (imap->l_tls_offset != NO_TLS_OFFSET
&& imap->l_tls_offset != FORCED_DYNAMIC_TLS_OFFSET)
@@ -769,8 +772,11 @@ _dl_close_worker (struct link_map *map, bool force)
/* If we removed any object which uses TLS bump the generation counter. */
if (any_tls)
{
- if (__glibc_unlikely (++GL(dl_tls_generation) == 0))
+ size_t newgen = GL(dl_tls_generation) + 1;
+ if (__glibc_unlikely (newgen == 0))
_dl_fatal_printf ("TLS generation counter wrapped! Please report as described in "REPORT_BUGS_TO".\n");
+ /* Can be read concurrently. */
+ atomic_store_relaxed (&GL(dl_tls_generation), newgen);
if (tls_free_end == GL(dl_tls_static_used))
GL(dl_tls_static_used) = tls_free_start;
diff --git a/elf/dl-open.c b/elf/dl-open.c
index b052bb0bc2cd17aa..a67fb3aee40860e1 100644
--- a/elf/dl-open.c
+++ b/elf/dl-open.c
@@ -395,9 +395,12 @@ update_tls_slotinfo (struct link_map *new)
}
}
- if (__builtin_expect (++GL(dl_tls_generation) == 0, 0))
+ size_t newgen = GL(dl_tls_generation) + 1;
+ if (__glibc_unlikely (newgen == 0))
_dl_fatal_printf (N_("\
TLS generation counter wrapped! Please report this."));
+ /* Can be read concurrently. */
+ atomic_store_relaxed (&GL(dl_tls_generation), newgen);
/* We need a second pass for static tls data, because
_dl_update_slotinfo must not be run while calls to
diff --git a/elf/dl-tls.c b/elf/dl-tls.c
index da83cd6ae2ee6504..801eafad3961573c 100644
--- a/elf/dl-tls.c
+++ b/elf/dl-tls.c
@@ -175,7 +175,9 @@ _dl_next_tls_modid (void)
/* No gaps, allocate a new entry. */
nogaps:
- result = ++GL(dl_tls_max_dtv_idx);
+ result = GL(dl_tls_max_dtv_idx) + 1;
+ /* Can be read concurrently. */
+ atomic_store_relaxed (&GL(dl_tls_max_dtv_idx), result);
}
return result;
@@ -359,10 +361,12 @@ allocate_dtv (void *result)
dtv_t *dtv;
size_t dtv_length;
+ /* Relaxed MO, because the dtv size is later rechecked, not relied on. */
+ size_t max_modid = atomic_load_relaxed (&GL(dl_tls_max_dtv_idx));
/* We allocate a few more elements in the dtv than are needed for the
initial set of modules. This should avoid in most cases expansions
of the dtv. */
- dtv_length = GL(dl_tls_max_dtv_idx) + DTV_SURPLUS;
+ dtv_length = max_modid + DTV_SURPLUS;
dtv = calloc (dtv_length + 2, sizeof (dtv_t));
if (dtv != NULL)
{
@@ -767,7 +771,7 @@ _dl_update_slotinfo (unsigned long int req_modid)
if (modid > max_modid)
break;
- size_t gen = listp->slotinfo[cnt].gen;
+ size_t gen = atomic_load_relaxed (&listp->slotinfo[cnt].gen);
if (gen > new_gen)
/* Not relevant. */
@@ -779,7 +783,8 @@ _dl_update_slotinfo (unsigned long int req_modid)
continue;
/* If there is no map this means the entry is empty. */
- struct link_map *map = listp->slotinfo[cnt].map;
+ struct link_map *map
+ = atomic_load_relaxed (&listp->slotinfo[cnt].map);
/* Check whether the current dtv array is large enough. */
if (dtv[-1].counter < modid)
{
@@ -923,7 +928,12 @@ __tls_get_addr (GET_ADDR_ARGS)
{
dtv_t *dtv = THREAD_DTV ();
- if (__glibc_unlikely (dtv[0].counter != GL(dl_tls_generation)))
+ /* Update is needed if dtv[0].counter < the generation of the accessed
+ module. The global generation counter is used here as it is easier
+ to check. Synchronization for the relaxed MO access is guaranteed
+ by user code, see CONCURRENCY NOTES in _dl_update_slotinfo. */
+ size_t gen = atomic_load_relaxed (&GL(dl_tls_generation));
+ if (__glibc_unlikely (dtv[0].counter != gen))
return update_get_addr (GET_ADDR_PARAM);
void *p = dtv[GET_ADDR_MODULE].pointer.val;
@@ -946,7 +956,10 @@ _dl_tls_get_addr_soft (struct link_map *l)
return NULL;
dtv_t *dtv = THREAD_DTV ();
- if (__glibc_unlikely (dtv[0].counter != GL(dl_tls_generation)))
+ /* This may be called without holding the GL(dl_load_lock). Reading
+ arbitrary gen value is fine since this is best effort code. */
+ size_t gen = atomic_load_relaxed (&GL(dl_tls_generation));
+ if (__glibc_unlikely (dtv[0].counter != gen))
{
/* This thread's DTV is not completely current,
but it might already cover this module. */
@@ -1032,7 +1045,9 @@ cannot create TLS data structures"));
/* Add the information into the slotinfo data structure. */
if (do_add)
{
- listp->slotinfo[idx].map = l;
- listp->slotinfo[idx].gen = GL(dl_tls_generation) + 1;
+ /* Can be read concurrently. See _dl_update_slotinfo. */
+ atomic_store_relaxed (&listp->slotinfo[idx].map, l);
+ atomic_store_relaxed (&listp->slotinfo[idx].gen,
+ GL(dl_tls_generation) + 1);
}
}
diff --git a/sysdeps/x86_64/dl-tls.c b/sysdeps/x86_64/dl-tls.c
index 533ee2b3a6e85ad8..bc543dcc264ea361 100644
--- a/sysdeps/x86_64/dl-tls.c
+++ b/sysdeps/x86_64/dl-tls.c
@@ -40,7 +40,8 @@ __tls_get_addr_slow (GET_ADDR_ARGS)
{
dtv_t *dtv = THREAD_DTV ();
- if (__glibc_unlikely (dtv[0].counter != GL(dl_tls_generation)))
+ size_t gen = atomic_load_relaxed (&GL(dl_tls_generation));
+ if (__glibc_unlikely (dtv[0].counter != gen))
return update_get_addr (GET_ADDR_PARAM);
return tls_get_addr_tail (GET_ADDR_PARAM, dtv, NULL);