Complete `Move to /usr' transition for package.

All relevant files are not installed to /usr, with the expectation
that the distribution will provide compatibility links from the
old paths to the new paths. All uses of a bare `/usr' have been
replaced with uses of `%{_prefix}' for files installed by the
package.
This commit is contained in:
Carlos O'Donell 2013-08-13 13:18:15 -04:00
parent baa7ac6384
commit 62c3082486

View File

@ -1,6 +1,6 @@
%define glibcsrcdir glibc-2.17-931-g30bbc0c %define glibcsrcdir glibc-2.17-931-g30bbc0c
%define glibcversion 2.17.90 %define glibcversion 2.17.90
%define glibcrelease 11%{?dist} %define glibcrelease 12%{?dist}
############################################################################## ##############################################################################
# If run_glibc_tests is zero then tests are not run for the build. # If run_glibc_tests is zero then tests are not run for the build.
# You must always set run_glibc_tests to one for production builds. # You must always set run_glibc_tests to one for production builds.
@ -725,13 +725,23 @@ GCC=`cat Gcc`
# Cleanup any previous installs... # Cleanup any previous installs...
rm -rf $RPM_BUILD_ROOT rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT
# Install the build into the build root. We set slibdir, sbindir and
# rootsbindir to ensure that all of the files are installed under /usr per the
# "Move to /usr" initiative: http://fedoraproject.org/wiki/Features/UsrMove
make -j1 install_root=$RPM_BUILD_ROOT \ make -j1 install_root=$RPM_BUILD_ROOT \
slibdir=%{_libdir} \
sbindir=%{_sbindir} \
rootsbindir=%{_sbindir} \
install -C build-%{target} %{silentrules} install -C build-%{target} %{silentrules}
# If we are not building an auxiliary arch then install all of the supported # If we are not building an auxiliary arch then install all of the supported
# locales. # locales.
%ifnarch %{auxarches} %ifnarch %{auxarches}
pushd build-%{target} pushd build-%{target}
make %{?_smp_mflags} install_root=$RPM_BUILD_ROOT \ make %{?_smp_mflags} install_root=$RPM_BUILD_ROOT \
slibdir=%{_libdir} \
sbindir=%{_sbindir} \
rootsbindir=%{_sbindir} \
install-locales -C ../localedata objdir=`pwd` install-locales -C ../localedata objdir=`pwd`
popd popd
%endif %endif
@ -740,14 +750,20 @@ popd
# Install rtkaio libraries. # Install rtkaio libraries.
############################################################################## ##############################################################################
%ifarch %{rtkaioarches} %ifarch %{rtkaioarches}
librtso=`basename $RPM_BUILD_ROOT/%{_lib}/librt.so.*` # The name of librt.so.x DSO to which we will link librtkaio-*.so.
rm -f $RPM_BUILD_ROOT{,%{_prefix}}/%{_lib}/librtkaio.* librtso=`basename $RPM_BUILD_ROOT%{_libdir}/librt.so.*`
rm -f $RPM_BUILD_ROOT%{_libdir}/librt.so.* # Move all of the rtkaio libraries into /usr/lib[64]/rtkaio
mkdir -p $RPM_BUILD_ROOT/%{_lib}/rtkaio mkdir -p "$RPM_BUILD_ROOT%{_libdir}/rtkaio"
mv $RPM_BUILD_ROOT/%{_lib}/librtkaio-*.so $RPM_BUILD_ROOT/%{_lib}/rtkaio/ mv $RPM_BUILD_ROOT%{_libdir}/librtkaio* "$RPM_BUILD_ROOT%{_libdir}/rtkaio/"
rm -f $RPM_BUILD_ROOT/%{_lib}/$librtso # Remove the static archive for librtkaio.
ln -sf `basename $RPM_BUILD_ROOT/%{_lib}/librt-*.so` $RPM_BUILD_ROOT/%{_lib}/$librtso rm -f "$RPM_BUILD_ROOT%{_libdir}/rtkaio/librtkaio.a"
ln -sf `basename $RPM_BUILD_ROOT/%{_lib}/rtkaio/librtkaio-*.so` $RPM_BUILD_ROOT/%{_lib}/rtkaio/$librtso # Remove the DSO symlink that won't be used by any application. Remember
# that librtkaio.so is a dropin for librt.so, and the latter is the only
# link we care about. No application will ever explicitly link against
# librtkaio.so.
rm -f $RPM_BUILD_ROOT%{_libdir}/rtkaio/librtkaio.*
# Provided a librt.so.x link that is implemented by rtkaio.
ln -sf librtkaio-%{glibcversion}.so "$RPM_BUILD_ROOT%{_libdir}/rtkaio/$librtso"
%endif %endif
# install_different: # install_different:
@ -785,27 +801,28 @@ install_different()
libbase=${lib#*/} libbase=${lib#*/}
# Take care that `libbaseso' has a * that needs expanding so # Take care that `libbaseso' has a * that needs expanding so
# take care with quoting. # take care with quoting.
libbaseso=$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}-*.so) libbaseso=$(basename $RPM_BUILD_ROOT%{_libdir}/${libbase}-*.so)
# Only install if different from default build library. # Only install if different from default build library.
if cmp -s ${lib}.so ../build-%{target}/${lib}.so; then if cmp -s ${lib}.so ../build-%{target}/${lib}.so; then
ln -sf "$subdir_up"/$libbaseso $libdestdir/$libbaseso ln -sf "$subdir_up"/$libbaseso $libdestdir/$libbaseso
else else
cp -a ${lib}.so $libdestdir/$libbaseso cp -a ${lib}.so $libdestdir/$libbaseso
fi fi
dlib=$libdestdir/$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}.so.*) dlib=$libdestdir/$(basename $RPM_BUILD_ROOT%{_libdir}/${libbase}.so.*)
ln -sf $libbaseso $dlib ln -sf $libbaseso $dlib
done done
%ifarch %{rtkaioarches} %ifarch %{rtkaioarches}
local rtkdestdir="$RPM_BUILD_ROOT/%{_lib}/rtkaio/$subdir" local rtkdestdir="$destdir/rtkaio/$subdir"
local librtso=`basename $RPM_BUILD_ROOT/%{_lib}/librt.so.*` local librtso=`basename $RPM_BUILD_ROOT%{_libdir}/librt.so.*`
mkdir -p $rkdestdir mkdir -p $rtkdestdir
librtkaioso=$(basename $RPM_BUILD_ROOT/%{_lib}/librt-*.so | sed s/librt-/librtkaio-/) lib="rtkaio/librtkaio"
if cmp -s rtkaio/librtkaio.so ../build-%{target}/rtkaio/librtkaio.so; then libbaseso=librtkaio-%{glibcversion}.so
ln -s %{nosegneg_subdir_up}/$librtkaioso $rtkdestdir/$librtkaioso if cmp -s "${lib}.so" "../build-%{target}/${lib}.so"; then
ln -s "$subdir_up"/$libbaseso "$rtkdestdir"/$libbaseso
else else
cp -a rtkaio/librtkaio.so $rtkdestdir/$librtkaioso cp -a "${lib}.so" "$rtkdestdir"/$libbaseso
fi fi
ln -sf $librtkaioso $rtkdestdir/$librtso ln -sf "$libbaseso" $rtkdestdir/$librtso
%endif %endif
} }
@ -817,7 +834,7 @@ install_different()
%define nosegneg_subdir i686/nosegneg %define nosegneg_subdir i686/nosegneg
%define nosegneg_subdir_up ../.. %define nosegneg_subdir_up ../..
pushd build-%{target}-nosegneg pushd build-%{target}-nosegneg
destdir=$RPM_BUILD_ROOT/%{_lib} destdir=$RPM_BUILD_ROOT%{_libdir}
install_different "$destdir" "%{nosegneg_subdir}" "%{nosegneg_subdir_up}" install_different "$destdir" "%{nosegneg_subdir}" "%{nosegneg_subdir_up}"
popd popd
%endif # %{buildxen} %endif # %{buildxen}
@ -919,10 +936,10 @@ install -p -m 644 nis/nss $RPM_BUILD_ROOT/etc/default/nss
# This is for ncsd - in glibc 2.2 # This is for ncsd - in glibc 2.2
install -m 644 nscd/nscd.conf $RPM_BUILD_ROOT/etc install -m 644 nscd/nscd.conf $RPM_BUILD_ROOT/etc
mkdir -p $RPM_BUILD_ROOT/usr/lib/tmpfiles.d/ mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib/tmpfiles.d/
install -m 644 releng/nscd.conf %{buildroot}/usr/lib/tmpfiles.d/ install -m 644 releng/nscd.conf %{buildroot}%{_prefix}/lib/tmpfiles.d/
mkdir -p $RPM_BUILD_ROOT/lib/systemd/system mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system
install -m 644 releng/nscd.service releng/nscd.socket $RPM_BUILD_ROOT/lib/systemd/system install -m 644 releng/nscd.service releng/nscd.socket $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system
%endif %endif
# Include ld.so.conf # Include ld.so.conf
@ -955,7 +972,7 @@ ln -sf libbsd-compat.a $RPM_BUILD_ROOT%{_libdir}/libbsd.a
# Install the upgrade program # Install the upgrade program
install -m 700 build-%{target}/glibc_post_upgrade.%{_target_cpu} \ install -m 700 build-%{target}/glibc_post_upgrade.%{_target_cpu} \
$RPM_BUILD_ROOT/usr/sbin/glibc_post_upgrade.%{_target_cpu} $RPM_BUILD_ROOT%{_prefix}/sbin/glibc_post_upgrade.%{_target_cpu}
# Strip all of the installed object files. # Strip all of the installed object files.
strip -g $RPM_BUILD_ROOT%{_libdir}/*.o strip -g $RPM_BUILD_ROOT%{_libdir}/*.o
@ -1033,9 +1050,6 @@ rm -f $RPM_BUILD_ROOT%{_prefix}/lib/debug%{_libdir}/*_p.a
-e '\,bin/\(memusage\|mtrace\|xtrace\|pcprofiledump\),d' -e '\,bin/\(memusage\|mtrace\|xtrace\|pcprofiledump\),d'
} | sort > rpm.filelist } | sort > rpm.filelist
mkdir -p $RPM_BUILD_ROOT%{_libdir}
mv -f $RPM_BUILD_ROOT/%{_lib}/lib{pcprofile,memusage}.so $RPM_BUILD_ROOT%{_libdir}
# The xtrace and memusage scripts have hard-coded paths that need to be # The xtrace and memusage scripts have hard-coded paths that need to be
# translated to a correct set of paths using the $LIB token which is # translated to a correct set of paths using the $LIB token which is
# dynamically translated by ld.so as the default lib directory. # dynamically translated by ld.so as the default lib directory.
@ -1077,36 +1091,63 @@ grep '%{_libdir}/lib.*\.a' < rpm.filelist \
# Put all of the object files and *.so (not the versioned ones) into the # Put all of the object files and *.so (not the versioned ones) into the
# devel package. # devel package.
grep '%{_libdir}/.*\.o' < rpm.filelist >> devel.filelist grep '%{_libdir}/.*\.o' < rpm.filelist >> devel.filelist
grep '%{_libdir}/lib.*\.so' < rpm.filelist >> devel.filelist # This regexp is tricky because we want to match libfoo.so, but not
# libfoo-X.Y.so or libfoo.so.1. The latter pair of libraries is needed for a
# program to run (soname refers to them), whlie the former is needed only
# when building an application (devel subpackage). We use the same regexp
# in the in-place sed below to remove these files from the core glibc package.
# We don't look for lib.*.so in rtkaio because we already removed those files
# earlier.
grep '^%{_libdir}/lib.*[[:alpha:]]\.so$' < rpm.filelist >> devel.filelist
# Remove libSegFault.so from devel, as it doesn't match the above rule.
sed -i -e '\|%{_libdir}/libSegFault\.so|d' devel.filelist
# Remove all of the static, object, unversioned DSOs, old linuxthreads stuff, # Remove all of the static, object, unversioned DSOs, old linuxthreads stuff,
# and nscd from the core glibc package. # and nscd from the core glibc package.
sed -i -e '\|%{_libdir}/lib.*\.a|d' \ sed -i -e '\|%{_libdir}/lib.*\.a|d' \
-e '\|%{_libdir}/.*\.o|d' \ -e '\|%{_libdir}/.*\.o|d' \
-e '\|%{_libdir}/lib.*\.so|d' \ -e '\|^%{_libdir}/lib.*[[:alpha:]]\.so$|d' \
%ifarch %{rtkaioarches}
-e '\|^%{_libdir}/rtkaio/lib.*[[:alpha:]]\.so$|d' \
%endif
-e '\|%{_libdir}/linuxthreads|d' \ -e '\|%{_libdir}/linuxthreads|d' \
-e '\|nscd|d' rpm.filelist -e '\|nscd|d' rpm.filelist
# Add back libSegFault.so to the core glibc package since it's required by
# anyone preloading it to catch segfaults. It should probably be in the
# devel subpackage but it's too late for that.
echo "%{_libdir}/libSegFault.so" >> rpm.filelist
# All of the bin and certain sbin files go into the common package. # All of the bin and certain sbin files go into the common package.
# We explicitly exclude certain sbin files that need to go into # We explicitly exclude certain sbin files that need to go into
# the core glibc package for use during upgrades. # the core glibc package for use during upgrades.
grep '%{_prefix}/bin' < rpm.filelist >> common.filelist # The files we exclude are:
grep '%{_prefix}/sbin/[^gi]' < rpm.filelist >> common.filelist # * glibc_post_upgrade - Used in post-upgrade.
# * iconvconfig - Used during upgrade to create iconv modules.
# * ldconfig - Used to reprocess library cache after upgarde.
# * sln - Used to make links when in the middle of upgrades i.e. static ln.
grep '%{_prefix}/bin' < rpm.filelist > common.filelist
grep -e '%{_prefix}/sbin/.*' < rpm.filelist |
grep -v -e '%{_prefix}/sbin/glibc_post_upgrade.*' \
-e '%{_prefix}/sbin/iconvconfig.*' \
-e '%{_prefix}/sbin/ldconfig.*' \
-e '%{_prefix}/sbin/sln.*' >> common.filelist
# All of the files under share go into the common package since # All of the files under share go into the common package since
# they should be multilib-independent. # they should be multilib-independent. Remove the zoneinfo files
# since we don't plan to ship them (see below for their removal).
grep '%{_prefix}/share' < rpm.filelist | \ grep '%{_prefix}/share' < rpm.filelist | \
grep -v -e '%{_prefix}/share/zoneinfo' -e '%%dir %{prefix}/share' \ grep -v -e '%{_prefix}/share/zoneinfo' >> common.filelist
>> common.filelist
# Remove the bin, locale, some sbin, and share from the # Remove the bin, locale, some sbin, and share from the
# core glibc package. We cheat a bit and use the slightly dangerous # core glibc package. We cheat a bit and use the slightly dangerous
# /usr/sbin/[^gi] to match the inverse of the search that put the # /usr/sbin/[^gils] to match the inverse of the search that put the
# files into common.filelist. It's dangerous in that additional files # files into common.filelist. It's dangerous in that additional files
# that start with g, or i would get put into common.filelist and # that start with g, i, l, or s would get put into common.filelist and
# rpm.filelist. # rpm.filelist.
sed -i -e '\|%{_prefix}/bin|d' \ sed -i -e '\|%{_prefix}/bin|d' \
-e '\|%{_prefix}/lib/locale|d' \ -e '\|%{_prefix}/lib/locale|d' \
-e '\|%{_prefix}/sbin/[^gi]|d' \ -e '\|%{_prefix}/sbin/[^gils]|d' \
-e '\|%{_prefix}/share|d' rpm.filelist -e '\|%{_prefix}/share|d' rpm.filelist
############################################################################## ##############################################################################
@ -1114,8 +1155,8 @@ sed -i -e '\|%{_prefix}/bin|d' \
############################################################################## ##############################################################################
truncate -s 0 nosegneg.filelist truncate -s 0 nosegneg.filelist
%if %{xenpackage} %if %{xenpackage}
grep '/%{_lib}/%{nosegneg_subdir}' < rpm.filelist >> nosegneg.filelist grep '%{_libdir}/%{nosegneg_subdir}' < rpm.filelist >> nosegneg.filelist
sed -i -e '\|/%{_lib}/%{nosegneg_subdir}|d' rpm.filelist sed -i -e '\|%{_libdir}/%{nosegneg_subdir}|d' rpm.filelist
# TODO: There are files in the nosegneg list which should be in the devel # TODO: There are files in the nosegneg list which should be in the devel
# pacakge, but we leave them instead in the xen subpackage. We may # pacakge, but we leave them instead in the xen subpackage. We may
# wish to clean that up at some point. # wish to clean that up at some point.
@ -1144,9 +1185,12 @@ cat > utils.filelist <<EOF
%{_prefix}/bin/xtrace %{_prefix}/bin/xtrace
EOF EOF
# Remove the zoneinfo files # Remove the zoneinfo files.
# XXX: Why isn't this don't earlier when we are removing files? # TODO: This is done late in the process for no good reason.
# Won't this impact what is shipped? # The zone info file are somewhat silently removed above
# by filtering them out of common.filelist and then
# by removing all of %{_prefix}/share from rpm.filelist.
# This should be done much earlier.
rm -rf $RPM_BUILD_ROOT%{_prefix}/share/zoneinfo rm -rf $RPM_BUILD_ROOT%{_prefix}/share/zoneinfo
# Make sure %config files have the same timestamp # Make sure %config files have the same timestamp
@ -1165,7 +1209,7 @@ $GCC -Os -g -o build-locale-archive build-locale-archive.c \
-L../build-%{target} \ -L../build-%{target} \
-Wl,--allow-shlib-undefined \ -Wl,--allow-shlib-undefined \
-B../build-%{target}/csu/ -lc -lc_nonshared -B../build-%{target}/csu/ -lc -lc_nonshared
install -m 700 build-locale-archive $RPM_BUILD_ROOT/usr/sbin/build-locale-archive install -m 700 build-locale-archive $RPM_BUILD_ROOT%{_prefix}/sbin/build-locale-archive
popd popd
# Lastly copy some additional documentation for the packages. # Lastly copy some additional documentation for the packages.
@ -1177,16 +1221,16 @@ cp ChangeLog{,.15,.16} documentation
bzip2 -9 documentation/ChangeLog* bzip2 -9 documentation/ChangeLog*
cp posix/gai.conf documentation/ cp posix/gai.conf documentation/
%ifarch s390x
# Compatibility symlink # Compatibility symlink
mkdir -p $RPM_BUILD_ROOT/lib %ifarch s390x
ln -sf /%{_lib}/ld64.so.1 $RPM_BUILD_ROOT/lib/ld64.so.1 mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib
ln -sf %{_libdir}/ld64.so.1 $RPM_BUILD_ROOT%{_prefix}/lib/ld64.so.1
%endif %endif
# Leave a compatibility symlink for the dynamic loader on armhfp targets, # Leave a compatibility symlink for the dynamic loader on armhfp targets,
# at least until the world gets rebuilt # at least until the world gets rebuilt
%ifarch armv7hl armv7hnl %ifarch armv7hl armv7hnl
ln -sf /lib/ld-linux-armhf.so.3 $RPM_BUILD_ROOT/lib/ld-linux.so.3 ln -sf %{_libdir}/ld-linux-armhf.so.3 $RPM_BUILD_ROOT%{_libdir}/ld-linux.so.3
%endif %endif
############################################################################## ##############################################################################
@ -1247,9 +1291,9 @@ done
echo ====================TESTING END===================== echo ====================TESTING END=====================
PLTCMD='/^Relocation section .*\(\.rela\?\.plt\|\.rela\.IA_64\.pltoff\)/,/^$/p' PLTCMD='/^Relocation section .*\(\.rela\?\.plt\|\.rela\.IA_64\.pltoff\)/,/^$/p'
echo ====================PLT RELOCS LD.SO================ echo ====================PLT RELOCS LD.SO================
readelf -Wr $RPM_BUILD_ROOT/%{_lib}/ld-*.so | sed -n -e "$PLTCMD" readelf -Wr $RPM_BUILD_ROOT%{_libdir}/ld-*.so | sed -n -e "$PLTCMD"
echo ====================PLT RELOCS LIBC.SO============== echo ====================PLT RELOCS LIBC.SO==============
readelf -Wr $RPM_BUILD_ROOT/%{_lib}/libc-*.so | sed -n -e "$PLTCMD" readelf -Wr $RPM_BUILD_ROOT%{_libdir}/libc-*.so | sed -n -e "$PLTCMD"
echo ====================PLT RELOCS END================== echo ====================PLT RELOCS END==================
%endif # %{run_glibc_tests} %endif # %{run_glibc_tests}
@ -1263,7 +1307,7 @@ echo ====================PLT RELOCS END==================
# such that static linking works and produces the most minimally sized # such that static linking works and produces the most minimally sized
# static application possible. # static application possible.
############################################################################### ###############################################################################
pushd $RPM_BUILD_ROOT/usr/%{_lib}/ pushd $RPM_BUILD_ROOT%{_libdir}
$GCC -r -nostdlib -o libpthread.o -Wl,--whole-archive ./libpthread.a $GCC -r -nostdlib -o libpthread.o -Wl,--whole-archive ./libpthread.a
rm libpthread.a rm libpthread.a
ar rcs libpthread.a libpthread.o ar rcs libpthread.a libpthread.o
@ -1285,10 +1329,10 @@ popd
# Print some diagnostic information in the builds about the # Print some diagnostic information in the builds about the
# getconf binaries. # getconf binaries.
# XXX: Why do we do this? # XXX: Why do we do this?
ls -l $RPM_BUILD_ROOT/usr/bin/getconf ls -l $RPM_BUILD_ROOT%{_prefix}/bin/getconf
ls -l $RPM_BUILD_ROOT/usr/libexec/getconf ls -l $RPM_BUILD_ROOT%{_prefix}/libexec/getconf
eu-readelf -hS $RPM_BUILD_ROOT/usr/bin/getconf \ eu-readelf -hS $RPM_BUILD_ROOT%{_prefix}/bin/getconf \
$RPM_BUILD_ROOT/usr/libexec/getconf/* $RPM_BUILD_ROOT%{_prefix}/libexec/getconf/*
find_debuginfo_args='--strict-build-id -g' find_debuginfo_args='--strict-build-id -g'
%ifarch %{debuginfocommonarches} %ifarch %{debuginfocommonarches}
@ -1296,12 +1340,12 @@ find_debuginfo_args="$find_debuginfo_args \
-l common.filelist \ -l common.filelist \
-l utils.filelist \ -l utils.filelist \
-l nscd.filelist \ -l nscd.filelist \
-p '.*/(sbin|libexec)/.*' \ -p '%{_prefix}/(sbin|libexec)/.*' \
-o debuginfocommon.filelist \ -o debuginfocommon.filelist \
-l rpm.filelist \ -l rpm.filelist \
-l nosegneg.filelist" -l nosegneg.filelist"
%endif %endif
eval /usr/lib/rpm/find-debuginfo.sh \ eval %{_prefix}/lib/rpm/find-debuginfo.sh \
"$find_debuginfo_args" \ "$find_debuginfo_args" \
-o debuginfo.filelist -o debuginfo.filelist
@ -1413,9 +1457,9 @@ if rpm.vercmp(rel, required) < 0 then
error("FATAL: kernel too old", 0) error("FATAL: kernel too old", 0)
end end
%post -p /usr/sbin/glibc_post_upgrade.%{_target_cpu} %post -p %{_prefix}/sbin/glibc_post_upgrade.%{_target_cpu}
%postun -p /sbin/ldconfig %postun -p %{_prefix}/sbin/ldconfig
%triggerin common -p <lua> -- glibc %triggerin common -p <lua> -- glibc
if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then if posix.stat("%{_prefix}/lib/locale/locale-archive.tmpl", "size") > 0 then
@ -1453,9 +1497,9 @@ if [ "$1" = 0 ]; then
/sbin/install-info --delete %{_infodir}/libc.info.gz %{_infodir}/dir > /dev/null 2>&1 || : /sbin/install-info --delete %{_infodir}/libc.info.gz %{_infodir}/dir > /dev/null 2>&1 || :
fi fi
%post utils -p /sbin/ldconfig %post utils -p %{_prefix}/sbin/ldconfig
%postun utils -p /sbin/ldconfig %postun utils -p %{_prefix}/sbin/ldconfig
%pre -n nscd %pre -n nscd
getent group nscd >/dev/null || /usr/sbin/groupadd -g 28 -r nscd getent group nscd >/dev/null || /usr/sbin/groupadd -g 28 -r nscd
@ -1476,8 +1520,8 @@ fi
%systemd_postun_with_restart nscd.service %systemd_postun_with_restart nscd.service
%if %{xenpackage} %if %{xenpackage}
%post xen -p /sbin/ldconfig %post xen -p %{_prefix}/sbin/ldconfig
%postun xen -p /sbin/ldconfig %postun xen -p %{_prefix}/sbin/ldconfig
%endif %endif
%clean %clean
@ -1486,31 +1530,31 @@ rm -f *.filelist*
%files -f rpm.filelist %files -f rpm.filelist
%defattr(-,root,root) %defattr(-,root,root)
%dir /usr/%{_lib}/audit %dir %{_libdir}/audit
%ifarch %{rtkaioarches} %ifarch %{rtkaioarches}
%dir /%{_lib}/rtkaio %dir %{_libdir}/rtkaio
%endif %endif
%if %{buildxen} && !%{xenpackage} %if %{buildxen} && !%{xenpackage}
%dir /%{_lib}/%{nosegneg_subdir_base} %dir %{_libdir}/%{nosegneg_subdir_base}
%dir /%{_lib}/%{nosegneg_subdir} %dir %{_libdir}/%{nosegneg_subdir}
%ifarch %{rtkaioarches} %ifarch %{rtkaioarches}
%dir /%{_lib}/rtkaio/%{nosegneg_subdir_base} %dir %{_libdir}/rtkaio/%{nosegneg_subdir_base}
%dir /%{_lib}/rtkaio/%{nosegneg_subdir} %dir %{_libdir}/rtkaio/%{nosegneg_subdir}
%endif %endif
%endif %endif
%if %{buildpower6} %if %{buildpower6}
%dir /%{_lib}/power6 %dir %{_libdir}/power6
%dir /%{_lib}/power6x %dir %{_libdir}/power6x
%ifarch %{rtkaioarches} %ifarch %{rtkaioarches}
%dir /%{_lib}/rtkaio/power6 %dir %{_libdir}/rtkaio/power6
%dir /%{_lib}/rtkaio/power6x %dir %{_libdir}/rtkaio/power6x
%endif %endif
%endif %endif
%ifarch s390x %ifarch s390x
/lib/ld64.so.1 %{_prefix}/lib/ld64.so.1
%endif %endif
%ifarch armv7hl armv7hnl %ifarch armv7hl armv7hnl
/lib/ld-linux.so.3 %{_prefix}/lib/ld-linux.so.3
%endif %endif
%verify(not md5 size mtime) %config(noreplace) /etc/nsswitch.conf %verify(not md5 size mtime) %config(noreplace) /etc/nsswitch.conf
%verify(not md5 size mtime) %config(noreplace) /etc/ld.so.conf %verify(not md5 size mtime) %config(noreplace) /etc/ld.so.conf
@ -1529,8 +1573,8 @@ rm -f *.filelist*
%if %{xenpackage} %if %{xenpackage}
%files -f nosegneg.filelist xen %files -f nosegneg.filelist xen
%defattr(-,root,root) %defattr(-,root,root)
%dir /%{_lib}/%{nosegneg_subdir_base} %dir %{_libdir}/%{nosegneg_subdir_base}
%dir /%{_lib}/%{nosegneg_subdir} %dir %{_libdir}/%{nosegneg_subdir}
%endif %endif
%ifnarch %{auxarches} %ifnarch %{auxarches}
@ -1559,9 +1603,9 @@ rm -f *.filelist*
%config(noreplace) /etc/nscd.conf %config(noreplace) /etc/nscd.conf
%dir %attr(0755,root,root) /var/run/nscd %dir %attr(0755,root,root) /var/run/nscd
%dir %attr(0755,root,root) /var/db/nscd %dir %attr(0755,root,root) /var/db/nscd
/lib/systemd/system/nscd.service %{_prefix}/lib/systemd/system/nscd.service
/lib/systemd/system/nscd.socket %{_prefix}/lib/systemd/system/nscd.socket
/usr/lib/tmpfiles.d/nscd.conf %{_prefix}/lib/tmpfiles.d/nscd.conf
%attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/nscd.pid %attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/nscd.pid
%attr(0666,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/socket %attr(0666,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/socket
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/passwd %attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /var/run/nscd/passwd
@ -1587,6 +1631,10 @@ rm -f *.filelist*
%endif %endif
%changelog %changelog
* Tue Aug 13 2013 Carlos O'Donell <codonell@redhat.com> - 2.17.90-12
- Complete `Move to /usr' transition. All relevant files are now
installed into `/usr'.
* Wed Aug 07 2013 Karsten Hopp <karsten@redhat.com> 2.17.90-11 * Wed Aug 07 2013 Karsten Hopp <karsten@redhat.com> 2.17.90-11
- rebuild with the latest rpm to fix missing ld64.so provides on PPC - rebuild with the latest rpm to fix missing ld64.so provides on PPC