rpms/glibc
7
0
Fork 1
Code Issues Pull Requests Releases Activity
a9
glibc/SOURCES/glibc-rh1988382.patch

620 lines
24 KiB
Diff
Raw Permalink Normal View History

import glibc-2.34-28.el9_0
2022-05-17 10:24:40 +00:00
commit 23645707f12f2dd9d80b51effb2d9618a7b65565
Author: Siddhesh Poyarekar <siddhesh@sourceware.org>
Date: Wed Dec 8 11:21:26 2021 +0530
Replace --enable-static-pie with --disable-default-pie
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
diff --git a/INSTALL b/INSTALL
index 02dcf6b1ca3a4c43..d6d93ec9be4262d7 100644
--- a/INSTALL
+++ b/INSTALL
@@ -111,16 +111,14 @@ if 'CFLAGS' is specified it must enable optimization. For example:
systems support shared libraries; you need ELF support and
(currently) the GNU linker.
-'--enable-static-pie'
- Enable static position independent executable (static PIE) support.
- Static PIE is similar to static executable, but can be loaded at
- any address without help from a dynamic linker. All static
- programs as well as static tests are built as static PIE, except
- for those marked with no-pie. The resulting glibc can be used with
- the GCC option, -static-pie, which is available with GCC 8 or
- above, to create static PIE. This option also implies that glibc
- programs and tests are created as dynamic position independent
- executables (PIE) by default.
+'--disable-default-pie'
+ Don't build glibc programs and the testsuite as position
+ independent executables (PIE). By default, glibc programs and tests
+ are created as position independent executables on targets that
+ support it. If the toolchain and architecture support it, static
+ executables are built as static PIE and the resulting glibc can be
+ used with the GCC option, -static-pie, which is available with GCC
+ 8 or above, to create static PIE.
'--enable-cet'
'--enable-cet=permissive'
diff --git a/Makeconfig b/Makeconfig
index 2fa0884b4eee5e53..8bc5540292c7b6fa 100644
--- a/Makeconfig
+++ b/Makeconfig
@@ -1,4 +1,5 @@
# Copyright (C) 1991-2021 Free Software Foundation, Inc.
+# Copyright (C) The GNU Toolchain Authors.
# This file is part of the GNU C Library.
# The GNU C Library is free software; you can redistribute it and/or
@@ -376,19 +377,24 @@ LDFLAGS.so += $(hashstyle-LDFLAGS)
LDFLAGS-rtld += $(hashstyle-LDFLAGS)
endif
-ifeq (yes,$(enable-static-pie))
+ifeq (no,$(build-pie-default))
+pie-default = $(no-pie-ccflag)
+else # build-pie-default
pic-default = -DPIC
# Compile libc.a and libc_p.a with -fPIE/-fpie for static PIE.
pie-default = $(pie-ccflag)
+
+ifeq (yes,$(enable-static-pie))
ifeq (yes,$(have-static-pie))
-default-pie-ldflag = -static-pie
+static-pie-ldflag = -static-pie
else
# Static PIE can't have dynamic relocations in read-only segments since
# static PIE is mapped into memory by kernel. --eh-frame-hdr is needed
# for PIE to support exception.
-default-pie-ldflag = -Wl,-pie,--no-dynamic-linker,--eh-frame-hdr,-z,text
-endif
-endif
+static-pie-ldflag = -Wl,-pie,--no-dynamic-linker,--eh-frame-hdr,-z,text
+endif # have-static-pie
+endif # enable-static-pie
+endif # build-pie-default
# If lazy relocations are disabled, add the -z now flag. Use
# LDFLAGS-lib.so instead of LDFLAGS.so, to avoid adding the flag to
@@ -444,7 +450,7 @@ endif
# Command for statically linking programs with the C library.
ifndef +link-static
+link-static-before-inputs = -nostdlib -nostartfiles -static \
- $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)) \
+ $(if $($(@F)-no-pie),$(no-pie-ldflag),$(static-pie-ldflag)) \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(firstword $(CRT-$(@F)) $(csu-objpfx)$(real-static-start-installed-name)) \
$(+preinit) $(+prectorT)
@@ -479,7 +485,7 @@ ifeq (yes,$(build-pie-default))
+link-tests-after-inputs = $(link-libc-tests) $(+link-pie-after-libc)
+link-printers-tests = $(+link-pie-printers-tests)
else # not build-pie-default
-+link-before-inputs = -nostdlib -nostartfiles \
++link-before-inputs = -nostdlib -nostartfiles $(no-pie-ldflag) \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(combreloc-LDFLAGS) $(relro-LDFLAGS) $(hashstyle-LDFLAGS) \
$(firstword $(CRT-$(@F)) $(csu-objpfx)$(start-installed-name)) \
@@ -1047,6 +1053,7 @@ PIC-ccflag = -fPIC
endif
# This can be changed by a sysdep makefile
pie-ccflag = -fpie
+no-pie-ccflag = -fno-pie
# This one should always stay like this unless there is a very good reason.
PIE-ccflag = -fPIE
ifeq (yes,$(build-profile))
diff --git a/config.h.in b/config.h.in
index 8b45a3a61d774714..458342887e4e9380 100644
--- a/config.h.in
+++ b/config.h.in
@@ -277,6 +277,9 @@
/* Build glibc with tunables support. */
#define HAVE_TUNABLES 0
+/* Define if PIE is unsupported. */
+#undef PIE_UNSUPPORTED
+
/* Define if static PIE is supported. */
#undef SUPPORT_STATIC_PIE
diff --git a/config.make.in b/config.make.in
index cbf59114b0b9ae4f..e8630a8d0ccf874d 100644
--- a/config.make.in
+++ b/config.make.in
@@ -90,9 +90,6 @@ static-nss-crypt = @libc_cv_static_nss_crypt@
# Configuration options.
build-shared = @shared@
-build-pic-default= @libc_cv_pic_default@
-build-pie-default= @libc_cv_pie_default@
-cc-pie-default= @libc_cv_cc_pie_default@
build-profile = @profile@
build-static-nss = @static_nss@
cross-compiling = @cross_compiling@
diff --git a/configure b/configure
index 9619c10991d04362..e9d2b1f398c4dba0 100755
--- a/configure
+++ b/configure
@@ -596,9 +596,6 @@ DEFINES
static_nss
profile
libc_cv_multidir
-libc_cv_pie_default
-libc_cv_cc_pie_default
-libc_cv_pic_default
shared
static
ldd_rewrite_script
@@ -767,7 +764,7 @@ with_nonshared_cflags
enable_sanity_checks
enable_shared
enable_profile
-enable_static_pie
+enable_default_pie
enable_timezone_tools
enable_hardcoded_path_in_tests
enable_hidden_plt
@@ -1423,8 +1420,8 @@ Optional Features:
in special situations) [default=yes]
--enable-shared build shared library [default=yes if GNU ld]
--enable-profile build profiled library [default=no]
- --enable-static-pie enable static PIE support and use it in the
- testsuite [default=no]
+ --disable-default-pie Do not build glibc programs and the testsuite as PIE
+ [default=no]
--disable-timezone-tools
do not install timezone tools [default=install]
--enable-hardcoded-path-in-tests
@@ -3408,11 +3405,11 @@ else
profile=no
fi
-# Check whether --enable-static-pie was given.
-if test "${enable_static_pie+set}" = set; then :
- enableval=$enable_static_pie; static_pie=$enableval
+# Check whether --enable-default-pie was given.
+if test "${enable_default_pie+set}" = set; then :
+ enableval=$enable_default_pie; default_pie=$enableval
else
- static_pie=no
+ default_pie=yes
fi
# Check whether --enable-timezone-tools was given.
@@ -6912,7 +6909,8 @@ rm -f conftest.*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_pic_default" >&5
$as_echo "$libc_cv_pic_default" >&6; }
-
+config_vars="$config_vars
+build-pic-default = $libc_cv_pic_default"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -fPIE is default" >&5
$as_echo_n "checking whether -fPIE is default... " >&6; }
@@ -6932,17 +6930,37 @@ rm -f conftest.*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_cc_pie_default" >&5
$as_echo "$libc_cv_cc_pie_default" >&6; }
-libc_cv_pie_default=$libc_cv_cc_pie_default
-
-
-
-# Set the `multidir' variable by grabbing the variable from the compiler.
-# We do it once and save the result in a generated makefile.
-libc_cv_multidir=`${CC-cc} $CFLAGS $CPPFLAGS -print-multi-directory`
-
+config_vars="$config_vars
+cc-pie-default = $libc_cv_cc_pie_default"
-if test "$static_pie" = yes; then
- # Check target support for static PIE
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can build programs as PIE" >&5
+$as_echo_n "checking if we can build programs as PIE... " >&6; }
+if test "x$default_pie" != xno; then
+ # Disable build-pie-default if target does not support it.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef PIE_UNSUPPORTED
+# error PIE is not supported
+#endif
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ libc_cv_pie_default=yes
+else
+ libc_cv_pie_default=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_pie_default" >&5
+$as_echo "$libc_cv_pie_default" >&6; }
+config_vars="$config_vars
+build-pie-default = $libc_cv_pie_default"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can build static PIE programs" >&5
+$as_echo_n "checking if we can build static PIE programs... " >&6; }
+libc_cv_static_pie=$libc_cv_pie_default
+if test "x$libc_cv_pie_default" != xno \
+ -a "$libc_cv_no_dynamic_linker" = yes; then
+ # Enable static-pie if available
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#ifndef SUPPORT_STATIC_PIE
@@ -6950,22 +6968,25 @@ if test "$static_pie" = yes; then
#endif
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
-
+ libc_cv_static_pie=yes
else
- as_fn_error $? "the architecture does not support static PIE" "$LINENO" 5
+ libc_cv_static_pie=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- # The linker must support --no-dynamic-linker.
- if test "$libc_cv_no_dynamic_linker" != yes; then
- as_fn_error $? "linker support for --no-dynamic-linker needed" "$LINENO" 5
- fi
- # Default to PIE.
- libc_cv_pie_default=yes
- $as_echo "#define ENABLE_STATIC_PIE 1" >>confdefs.h
+ if test "$libc_cv_static_pie" = "yes"; then
+ $as_echo "#define ENABLE_STATIC_PIE 1" >>confdefs.h
+ fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_static_pie" >&5
+$as_echo "$libc_cv_static_pie" >&6; }
config_vars="$config_vars
-enable-static-pie = $static_pie"
+enable-static-pie = $libc_cv_static_pie"
+
+# Set the `multidir' variable by grabbing the variable from the compiler.
+# We do it once and save the result in a generated makefile.
+libc_cv_multidir=`${CC-cc} $CFLAGS $CPPFLAGS -print-multi-directory`
+
diff --git a/configure.ac b/configure.ac
index 34ecbba540546337..79f6822d29ce21cf 100644
--- a/configure.ac
+++ b/configure.ac
@@ -179,11 +179,11 @@ AC_ARG_ENABLE([profile],
[build profiled library @<:@default=no@:>@]),
[profile=$enableval],
[profile=no])
-AC_ARG_ENABLE([static-pie],
- AS_HELP_STRING([--enable-static-pie],
- [enable static PIE support and use it in the testsuite @<:@default=no@:>@]),
- [static_pie=$enableval],
- [static_pie=no])
+AC_ARG_ENABLE([default-pie],
+ AS_HELP_STRING([--disable-default-pie],
+ [Do not build glibc programs and the testsuite as PIE @<:@default=no@:>@]),
+ [default_pie=$enableval],
+ [default_pie=yes])
AC_ARG_ENABLE([timezone-tools],
AS_HELP_STRING([--disable-timezone-tools],
[do not install timezone tools @<:@default=install@:>@]),
@@ -1856,7 +1856,7 @@ if eval "${CC-cc} -S conftest.c 2>&AS_MESSAGE_LOG_FD 1>&AS_MESSAGE_LOG_FD"; then
libc_cv_pic_default=no
fi
rm -f conftest.*])
-AC_SUBST(libc_cv_pic_default)
+LIBC_CONFIG_VAR([build-pic-default], [$libc_cv_pic_default])
AC_CACHE_CHECK([whether -fPIE is default], libc_cv_cc_pie_default,
[libc_cv_cc_pie_default=yes
@@ -1869,30 +1869,38 @@ if eval "${CC-cc} -S conftest.c 2>&AS_MESSAGE_LOG_FD 1>&AS_MESSAGE_LOG_FD"; then
libc_cv_cc_pie_default=no
fi
rm -f conftest.*])
-libc_cv_pie_default=$libc_cv_cc_pie_default
-AC_SUBST(libc_cv_cc_pie_default)
-AC_SUBST(libc_cv_pie_default)
+LIBC_CONFIG_VAR([cc-pie-default], [$libc_cv_cc_pie_default])
+
+AC_MSG_CHECKING(if we can build programs as PIE)
+if test "x$default_pie" != xno; then
+ # Disable build-pie-default if target does not support it.
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#ifdef PIE_UNSUPPORTED
+# error PIE is not supported
+#endif]])], [libc_cv_pie_default=yes], [libc_cv_pie_default=no])
+fi
+AC_MSG_RESULT($libc_cv_pie_default)
+LIBC_CONFIG_VAR([build-pie-default], [$libc_cv_pie_default])
+
+AC_MSG_CHECKING(if we can build static PIE programs)
+libc_cv_static_pie=$libc_cv_pie_default
+if test "x$libc_cv_pie_default" != xno \
+ -a "$libc_cv_no_dynamic_linker" = yes; then
+ # Enable static-pie if available
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#ifndef SUPPORT_STATIC_PIE
+# error static PIE is not supported
+#endif]])], [libc_cv_static_pie=yes], [libc_cv_static_pie=no])
+ if test "$libc_cv_static_pie" = "yes"; then
+ AC_DEFINE(ENABLE_STATIC_PIE)
+ fi
+fi
+AC_MSG_RESULT($libc_cv_static_pie)
+LIBC_CONFIG_VAR([enable-static-pie], [$libc_cv_static_pie])
# Set the `multidir' variable by grabbing the variable from the compiler.
# We do it once and save the result in a generated makefile.
libc_cv_multidir=`${CC-cc} $CFLAGS $CPPFLAGS -print-multi-directory`
AC_SUBST(libc_cv_multidir)
-if test "$static_pie" = yes; then
- # Check target support for static PIE
- AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#ifndef SUPPORT_STATIC_PIE
-# error static PIE is not supported
-#endif]])], , AC_MSG_ERROR([the architecture does not support static PIE]))
- # The linker must support --no-dynamic-linker.
- if test "$libc_cv_no_dynamic_linker" != yes; then
- AC_MSG_ERROR([linker support for --no-dynamic-linker needed])
- fi
- # Default to PIE.
- libc_cv_pie_default=yes
- AC_DEFINE(ENABLE_STATIC_PIE)
-fi
-LIBC_CONFIG_VAR([enable-static-pie], [$static_pie])
-
AC_SUBST(profile)
AC_SUBST(static_nss)
diff --git a/manual/install.texi b/manual/install.texi
index 46f73b538d3fee6f..1320ac69b3c645f2 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -141,15 +141,13 @@ Don't build shared libraries even if it is possible. Not all systems
support shared libraries; you need ELF support and (currently) the GNU
linker.
-@item --enable-static-pie
-Enable static position independent executable (static PIE) support.
-Static PIE is similar to static executable, but can be loaded at any
-address without help from a dynamic linker. All static programs as
-well as static tests are built as static PIE, except for those marked
-with no-pie. The resulting glibc can be used with the GCC option,
--static-pie, which is available with GCC 8 or above, to create static
-PIE. This option also implies that glibc programs and tests are created
-as dynamic position independent executables (PIE) by default.
+@item --disable-default-pie
+Don't build glibc programs and the testsuite as position independent
+executables (PIE). By default, glibc programs and tests are created as
+position independent executables on targets that support it. If the toolchain
+and architecture support it, static executables are built as static PIE and the
+resulting glibc can be used with the GCC option, -static-pie, which is
+available with GCC 8 or above, to create static PIE.
@item --enable-cet
@itemx --enable-cet=permissive
diff --git a/scripts/build-many-glibcs.py b/scripts/build-many-glibcs.py
index 86537fa8005cfd3d..2fd82a5d054c51ca 100755
--- a/scripts/build-many-glibcs.py
+++ b/scripts/build-many-glibcs.py
@@ -1,6 +1,7 @@
#!/usr/bin/python3
# Build many configurations of glibc.
# Copyright (C) 2016-2021 Free Software Foundation, Inc.
+# Copyright (C) The GNU Toolchain Authors.
# This file is part of the GNU C Library.
#
# The GNU C Library is free software; you can redistribute it and/or
@@ -435,15 +436,15 @@ class Context(object):
'--disable-experimental-malloc',
'--disable-build-nscd',
'--disable-nscd']},
- {'variant': 'static-pie',
- 'cfg': ['--enable-static-pie']},
- {'variant': 'x32-static-pie',
+ {'variant': 'no-pie',
+ 'cfg': ['--disable-default-pie']},
+ {'variant': 'x32-no-pie',
'ccopts': '-mx32',
- 'cfg': ['--enable-static-pie']},
- {'variant': 'static-pie',
+ 'cfg': ['--disable-default-pie']},
+ {'variant': 'no-pie',
'arch': 'i686',
'ccopts': '-m32 -march=i686',
- 'cfg': ['--enable-static-pie']},
+ 'cfg': ['--disable-default-pie']},
{'variant': 'disable-multi-arch',
'arch': 'i686',
'ccopts': '-m32 -march=i686',
diff --git a/sysdeps/alpha/configure b/sysdeps/alpha/configure
index 464b5965276dca19..3d665d96f2b40c4e 100644
--- a/sysdeps/alpha/configure
+++ b/sysdeps/alpha/configure
@@ -5,4 +5,9 @@
# symbols in a position independent way.
$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
+
+# PIE builds fail on binutils 2.37 and earlier, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
+$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
+
# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/alpha/configure.ac b/sysdeps/alpha/configure.ac
index 38e52e71ac2a5bc0..8f9a39ed2e4a29cb 100644
--- a/sysdeps/alpha/configure.ac
+++ b/sysdeps/alpha/configure.ac
@@ -4,4 +4,8 @@ GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# With required gcc+binutils, we can always access static and hidden
# symbols in a position independent way.
AC_DEFINE(PI_STATIC_AND_HIDDEN)
+
+# PIE builds fail on binutils 2.37 and earlier, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
+AC_DEFINE(PIE_UNSUPPORTED)
# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/csky/configure b/sysdeps/csky/configure
index 19acb084fb43d9ea..27464eb707ebd6c6 100644
--- a/sysdeps/csky/configure
+++ b/sysdeps/csky/configure
@@ -2,3 +2,10 @@
# Local configure fragment for sysdeps/csky.
$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
+
+
+# PIE builds fail on binutils 2.37 and earlier, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
+$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
+
+# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/csky/configure.ac b/sysdeps/csky/configure.ac
index 5656b665da698d05..8e008249094d9e5a 100644
--- a/sysdeps/csky/configure.ac
+++ b/sysdeps/csky/configure.ac
@@ -2,3 +2,8 @@ GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/csky.
AC_DEFINE(PI_STATIC_AND_HIDDEN)
+
+# PIE builds fail on binutils 2.37 and earlier, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
+AC_DEFINE(PIE_UNSUPPORTED)
+# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/hppa/configure b/sysdeps/hppa/configure
index 2cfe6cbea14549d0..cf5acf966dad67ba 100644
--- a/sysdeps/hppa/configure
+++ b/sysdeps/hppa/configure
@@ -30,3 +30,10 @@ $as_echo "$libc_cv_asm_line_sep" >&6; }
cat >>confdefs.h <<_ACEOF
#define ASM_LINE_SEP $libc_cv_asm_line_sep
_ACEOF
+
+
+# PIE builds fail on binutils 2.37 and earlier, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
+$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
+
+# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/hppa/configure.ac b/sysdeps/hppa/configure.ac
index 1ec417b9474c3382..3e1c35bbd992f548 100644
--- a/sysdeps/hppa/configure.ac
+++ b/sysdeps/hppa/configure.ac
@@ -19,3 +19,8 @@ else
fi
rm -f conftest*])
AC_DEFINE_UNQUOTED(ASM_LINE_SEP, $libc_cv_asm_line_sep)
+
+# PIE builds fail on binutils 2.37 and earlier, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
+AC_DEFINE(PIE_UNSUPPORTED)
+# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/ia64/configure b/sysdeps/ia64/configure
index 1ef70921bc5266db..748cb526012adeb8 100644
--- a/sysdeps/ia64/configure
+++ b/sysdeps/ia64/configure
@@ -3,4 +3,9 @@
$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
+
+# PIE builds fail on binutils 2.37 and earlier, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
+$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
+
# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/ia64/configure.ac b/sysdeps/ia64/configure.ac
index 3bae9fc5e1a3ff45..8e5fba32c3ec8bfc 100644
--- a/sysdeps/ia64/configure.ac
+++ b/sysdeps/ia64/configure.ac
@@ -4,4 +4,8 @@ GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
dnl It is always possible to access static and hidden symbols in an
dnl position independent way.
AC_DEFINE(PI_STATIC_AND_HIDDEN)
+
+# PIE builds fail on binutils 2.37 and earlier, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
+AC_DEFINE(PIE_UNSUPPORTED)
# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/mach/hurd/configure b/sysdeps/mach/hurd/configure
index 8d0702ad438d1c0a..3303e5dff8ef5ecf 100644
--- a/sysdeps/mach/hurd/configure
+++ b/sysdeps/mach/hurd/configure
@@ -49,3 +49,9 @@ fi
# Hurd has libpthread as a separate library.
pthread_in_libc=no
+
+# Hurd build needs to be updated to support static pie, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28671
+$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
+
+# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/mach/hurd/configure.ac b/sysdeps/mach/hurd/configure.ac
index 82d085af33701aa2..022c2eff79fc0d08 100644
--- a/sysdeps/mach/hurd/configure.ac
+++ b/sysdeps/mach/hurd/configure.ac
@@ -29,3 +29,8 @@ fi
# Hurd has libpthread as a separate library.
pthread_in_libc=no
+
+# Hurd build needs to be updated to support static pie, see:
+# https://sourceware.org/bugzilla/show_bug.cgi?id=28671
+AC_DEFINE(PIE_UNSUPPORTED)
+# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/microblaze/configure b/sysdeps/microblaze/configure
new file mode 100755
index 0000000000000000..e6652562d212b688
--- /dev/null
+++ b/sysdeps/microblaze/configure
@@ -0,0 +1,8 @@
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
+ # Local configure fragment for sysdeps/microblaze.
+
+# gcc 11.2.1 and earlier crash with an internal compiler error, see:
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103613
+$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
+
+# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/microblaze/configure.ac b/sysdeps/microblaze/configure.ac
new file mode 100644
index 0000000000000000..1c58f70a7bdfebcb
--- /dev/null
+++ b/sysdeps/microblaze/configure.ac
@@ -0,0 +1,7 @@
+GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
+# Local configure fragment for sysdeps/microblaze.
+
+# gcc 11.2.1 and earlier crash with an internal compiler error, see:
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103613
+AC_DEFINE(PIE_UNSUPPORTED)
+# work around problem with autoconf and empty lines at the end of files
diff --git a/sysdeps/sparc/Makefile b/sysdeps/sparc/Makefile
index 1be9a3db2ca12216..12c2c1b085fd4ae2 100644
--- a/sysdeps/sparc/Makefile
+++ b/sysdeps/sparc/Makefile
@@ -2,6 +2,7 @@
long-double-fcts = yes
pie-ccflag = -fPIE
+no-pie-ccflag = -fno-PIE
ifeq ($(subdir),gmon)
sysdep_routines += sparc-mcount
Reference in New Issue Copy Permalink