gdb/SOURCES/gdb-rhbz1842691-corefile-mem-access-14of15.patch
2021-10-08 11:13:03 +00:00

440 lines
14 KiB
Diff

From FEDORA_PATCHES Mon Sep 17 00:00:00 2001
From: Keith Seitz <keiths@redhat.com>
Date: Tue, 28 Jul 2020 09:46:44 -0400
Subject: gdb-rhbz1842691-corefile-mem-access-14of15.patch
;; New core file tests with mappings over existing program memory
;; Kevin Buettner, RH BZ 1842961
Author: Kevin Buettner <kevinb@redhat.com>
Date: Wed Jun 17 19:25:47 2020 -0700
New core file tests with mappings over existing program memory
This test case was inspired by Pedro's demonstration of a problem
with my v2 patches. It can be found here:
https://sourceware.org/pipermail/gdb-patches/2020-May/168826.html
In a nutshell, my earlier patches could not handle the case in
which a read-only mapping created with mmap() was created at
an address used by other file-backed read-only memory in use by
the process.
This problem has been fixed (for Linux, anyway) by the commit "Use
NT_FILE note section for reading core target memory".
When I run this test without any of my recent corefile patches,
I see these failures:
FAIL: gdb.base/corefile2.exp: kernel core: print/x mbuf_ro[0]@4
FAIL: gdb.base/corefile2.exp: kernel core: print/x mbuf_ro[pagesize-4]@4
FAIL: gdb.base/corefile2.exp: kernel core: print/x mbuf_ro[-3]@6
FAIL: gdb.base/corefile2.exp: kernel core: print/x mbuf_rw[pagesize-3]@6
FAIL: gdb.base/corefile2.exp: kernel core: print/x mbuf_ro[pagesize-3]@6
FAIL: gdb.base/corefile2.exp: maint print core-file-backed-mappings
FAIL: gdb.base/corefile2.exp: gcore core: print/x mbuf_ro[-3]@6
The ones involving mbuf_ro will almost certainly fail when run on
non-Linux systems; I've used setup_xfail on those tests to prevent
them from outright FAILing when not run on Linux. For a time, I
had considered skipping these tests altogether when not run on
Linux, but I changed my mind due to this failure...
FAIL: gdb.base/corefile2.exp: print/x mbuf_rw[pagesize-3]@6
I think it *should* pass without my recent corefile patches. The fact
that it doesn't is likely due to a bug in GDB. The following
interaction with GDB demonstrates the problem:
(gdb) print/x mbuf_rw[pagesize-3]@6
$1 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0}
(gdb) print/x mbuf_rw[pagesize]@3
$2 = {0x6b, 0x6b, 0x6b}
The last three values in display of $1 should be the same as those
shown by $2. Like this...
(gdb) print/x mbuf_rw[pagesize-3]@6
$1 = {0x0, 0x0, 0x0, 0x6b, 0x6b, 0x6b}
(gdb) print/x mbuf_rw[pagesize]@3
$2 = {0x6b, 0x6b, 0x6b}
That latter output was obtained with the use of all of my current
corefile patches. I see no failures on Linux when running this test
with my current set of corefile patches. I tested 3 architectures:
x86_64, s390x, and aarch64.
I also tested on FreeBSD 12.1-RELEASE. I see the following results
both with and without the current set of core file patches:
# of expected passes 26
# of expected failures 8
Of particular interest is that I did *not* see the problematic mbuf_rw
failure noted earlier (both with and without the core file patches).
I still don't have an explanation for why this failure occurred on
Linux. Prior to running the tests, I had hypothesized that I'd see
this failure on FreeBSD too, but testing shows that this is not the
case.
Also of importance is that we see no FAILs with this test on FreeBSD
which indicates that I XFAILed the correct tests.
This version runs the interesting tests twice, once with a kernel
created core file and another time with a gcore created core file.
It also does a very minimal test of the new command "maint print
core-file-backed-mappings".
gdb/testsuite/ChangeLog:
* gdb.base/corefile2.exp: New file.
* gdb.base/coremaker2.exp: New file.
diff --git a/gdb/testsuite/gdb.base/corefile2.exp b/gdb/testsuite/gdb.base/corefile2.exp
new file mode 100644
--- /dev/null
+++ b/gdb/testsuite/gdb.base/corefile2.exp
@@ -0,0 +1,185 @@
+# Copyright 2020 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Tests of core file memory accesses when mmap() has been used to
+# create a "hole" of zeroes over pre-existing memory regions. See
+# coremaker2.c for details.
+
+# are we on a target board
+if ![isnative] then {
+ return
+}
+
+# Some of these tests will only work on GNU/Linux due to the
+# fact that Linux core files includes a section describing
+# memory address to file mappings. We'll use set_up_xfail for the
+# affected tests. As other targets become supported, the condition
+# can be changed accordingly.
+
+set xfail 0
+if { ![istarget *-linux*] } {
+ set xfail 1
+}
+
+standard_testfile coremaker2.c
+
+if {[build_executable $testfile.exp $testfile $srcfile debug] == -1} {
+ untested "failed to compile"
+ return -1
+}
+
+set corefile [core_find $binfile {}]
+if {$corefile == ""} {
+ return 0
+}
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Attempt to load the core file.
+
+gdb_test_multiple "core-file $corefile" "core-file command" {
+ -re ".* program is being debugged already.*y or n. $" {
+ # gdb_load may connect us to a gdbserver.
+ send_gdb "y\n"
+ exp_continue
+ }
+ -re "Core was generated by .*corefile.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" {
+ pass "core-file command"
+ }
+ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" {
+ pass "core-file command (with bad program name)"
+ }
+ -re ".*registers from core file: File in wrong format.* $" {
+ fail "core-file command (could not read registers from core file)"
+ }
+}
+
+# Perform the "interesting" tests which check the contents of certain
+# memory regions.
+
+proc do_tests { } {
+ global xfail
+
+ # Check contents of beginning of buf_rw and buf_ro.
+
+ gdb_test {print/x buf_rw[0]@4} {\{0x6b, 0x6b, 0x6b, 0x6b\}}
+ gdb_test {print/x buf_ro[0]@4} {\{0xc5, 0xc5, 0xc5, 0xc5\}}
+
+ # Check for correct contents at beginning of mbuf_rw and mbuf_ro.
+
+ gdb_test {print/x mbuf_rw[0]@4} {\{0x0, 0x0, 0x0, 0x0\}}
+
+ if { $xfail } { setup_xfail "*-*-*" }
+ gdb_test {print/x mbuf_ro[0]@4} {\{0x0, 0x0, 0x0, 0x0\}}
+
+ # Check contents of mbuf_rw and mbuf_ro at the end of these regions.
+
+ gdb_test {print/x mbuf_rw[pagesize-4]@4} {\{0x0, 0x0, 0x0, 0x0\}}
+
+ if { $xfail } { setup_xfail "*-*-*" }
+ gdb_test {print/x mbuf_ro[pagesize-4]@4} {\{0x0, 0x0, 0x0, 0x0\}}
+
+ # Check contents of mbuf_rw and mbuf_ro, right before the hole,
+ # overlapping into the beginning of these mmap'd regions.
+
+ gdb_test {print/x mbuf_rw[-3]@6} {\{0x6b, 0x6b, 0x6b, 0x0, 0x0, 0x0\}}
+
+ if { $xfail } { setup_xfail "*-*-*" }
+ gdb_test {print/x mbuf_ro[-3]@6} {\{0xc5, 0xc5, 0xc5, 0x0, 0x0, 0x0\}}
+
+ # Likewise, at the end of the mbuf_rw and mbuf_ro, with overlap.
+
+ # If this test FAILs, it's probably a genuine bug unrelated to whether
+ # the core file includes a section describing memory address to file
+ # mappings or not. (So don't xfail it!)
+ gdb_test {print/x mbuf_rw[pagesize-3]@6} {\{0x0, 0x0, 0x0, 0x6b, 0x6b, 0x6b\}}
+
+ if { $xfail } { setup_xfail "*-*-*" }
+ gdb_test {print/x mbuf_ro[pagesize-3]@6} {\{0x0, 0x0, 0x0, 0xc5, 0xc5, 0xc5\}}
+
+ # Check contents of (what should be) buf_rw and buf_ro immediately after
+ # mbuf_rw and mbuf_ro holes.
+
+ gdb_test {print/x mbuf_rw[pagesize]@4} {\{0x6b, 0x6b, 0x6b, 0x6b\}}
+ gdb_test {print/x mbuf_ro[pagesize]@4} {\{0xc5, 0xc5, 0xc5, 0xc5\}}
+
+ # Check contents at ends of buf_rw and buf_rw.
+
+ gdb_test {print/x buf_rw[sizeof(buf_rw)-4]@4} {\{0x6b, 0x6b, 0x6b, 0x6b\}}
+ gdb_test {print/x buf_ro[sizeof(buf_ro)-4]@4} {\{0xc5, 0xc5, 0xc5, 0xc5\}}
+}
+
+# Run tests with kernel-produced core file.
+
+with_test_prefix "kernel core" {
+ do_tests
+}
+
+# Verify that "maint print core-file-backed-mappings" exists and does
+# not crash GDB. If it produces any output at all, make sure that
+# that output at least mentions binfile.
+
+set test "maint print core-file-backed-mappings"
+gdb_test_multiple $test "" {
+ -re ".*$binfile.*$gdb_prompt $" {
+ pass $test
+ }
+ -re "^$test\[\r\n\]*$gdb_prompt $" {
+ pass "$test (no output)"
+ }
+}
+
+# Restart and run to the abort call.
+
+clean_restart $binfile
+
+if ![runto_main] then {
+ fail "can't run to main"
+ return
+}
+
+gdb_breakpoint [gdb_get_line_number "abort"]
+gdb_continue_to_breakpoint "at abort"
+
+# Do not execute abort call; instead, invoke gcore command to make a
+# gdb-produced core file.
+
+set corefile [standard_output_file gcore.test]
+set core_supported [gdb_gcore_cmd "$corefile" "save a corefile"]
+if {!$core_supported} {
+ return
+}
+
+# maint print-core-file-backed-mappings shouldn't produce any output
+# when not debugging a core file.
+
+gdb_test_no_output "maint print core-file-backed-mappings" \
+ "maint print core-file-backed-mapping with no core file"
+
+clean_restart $binfile
+
+set core_loaded [gdb_core_cmd "$corefile" "re-load generated corefile"]
+if { $core_loaded == -1 } {
+ # No use proceeding from here.
+ return
+}
+
+# Run tests using gcore-produced core file.
+
+with_test_prefix "gcore core" {
+ do_tests
+}
diff --git a/gdb/testsuite/gdb.base/coremaker2.c b/gdb/testsuite/gdb.base/coremaker2.c
new file mode 100644
--- /dev/null
+++ b/gdb/testsuite/gdb.base/coremaker2.c
@@ -0,0 +1,150 @@
+/* Copyright 1992-2020 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* This test has two large memory areas buf_rw and buf_ro.
+
+ buf_rw is written to by the program while buf_ro is initialized at
+ compile / load time. Thus, when a core file is created, buf_rw's
+ memory should reside in the core file, but buf_ro probably won't be.
+ Instead, the contents of buf_ro are available from the executable.
+
+ Now, for the wrinkle: We create a one page read-only mapping over
+ both of these areas. This will create a one page "hole" of all
+ zeros in each area.
+
+ Will GDB be able to correctly read memory from each of the four
+ (or six, if you count the regions on the other side of each hole)
+ memory regions? */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <errno.h>
+
+/* These are globals so that we can find them easily when debugging
+ the core file. */
+long pagesize;
+unsigned long long addr;
+char *mbuf_ro;
+char *mbuf_rw;
+
+/* 24 KiB buffer. */
+char buf_rw[24 * 1024];
+
+/* 24 KiB worth of data. For this test case, we can't allocate a
+ buffer and then fill it; we want GDB to have to read this data
+ from the executable; it should NOT find it in the core file. */
+
+#define C5_16 \
+ 0xc5, 0xc5, 0xc5, 0xc5, \
+ 0xc5, 0xc5, 0xc5, 0xc5, \
+ 0xc5, 0xc5, 0xc5, 0xc5, \
+ 0xc5, 0xc5, 0xc5, 0xc5
+
+#define C5_256 \
+ C5_16, C5_16, C5_16, C5_16, \
+ C5_16, C5_16, C5_16, C5_16, \
+ C5_16, C5_16, C5_16, C5_16, \
+ C5_16, C5_16, C5_16, C5_16
+
+#define C5_1k \
+ C5_256, C5_256, C5_256, C5_256
+
+#define C5_24k \
+ C5_1k, C5_1k, C5_1k, C5_1k, \
+ C5_1k, C5_1k, C5_1k, C5_1k, \
+ C5_1k, C5_1k, C5_1k, C5_1k, \
+ C5_1k, C5_1k, C5_1k, C5_1k, \
+ C5_1k, C5_1k, C5_1k, C5_1k, \
+ C5_1k, C5_1k, C5_1k, C5_1k
+
+const char buf_ro[] = { C5_24k };
+
+int
+main (int argc, char **argv)
+{
+ int i, bitcount;
+
+#ifdef _SC_PAGESIZE
+ pagesize = sysconf (_SC_PAGESIZE);
+#else
+ pagesize = 8192;
+#endif
+
+ /* Verify that pagesize is a power of 2. */
+ bitcount = 0;
+ for (i = 0; i < 4 * sizeof (pagesize); i++)
+ if (pagesize & (1 << i))
+ bitcount++;
+
+ if (bitcount != 1)
+ {
+ fprintf (stderr, "pagesize is not a power of 2.\n");
+ exit (1);
+ }
+
+ /* Compute an address that should be within buf_ro. Complain if not. */
+ addr = ((unsigned long long) buf_ro + pagesize) & ~(pagesize - 1);
+
+ if (addr <= (unsigned long long) buf_ro
+ || addr >= (unsigned long long) buf_ro + sizeof (buf_ro))
+ {
+ fprintf (stderr, "Unable to compute a suitable address within buf_ro.\n");
+ exit (1);
+ }
+
+ mbuf_ro = mmap ((void *) addr, pagesize, PROT_READ,
+ MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0);
+
+ if (mbuf_ro == MAP_FAILED)
+ {
+ fprintf (stderr, "mmap #1 failed: %s.\n", strerror (errno));
+ exit (1);
+ }
+
+ /* Write (and fill) the R/W region. */
+ for (i = 0; i < sizeof (buf_rw); i++)
+ buf_rw[i] = 0x6b;
+
+ /* Compute an mmap address within buf_rw. Complain if it's somewhere
+ else. */
+ addr = ((unsigned long long) buf_rw + pagesize) & ~(pagesize - 1);
+
+ if (addr <= (unsigned long long) buf_rw
+ || addr >= (unsigned long long) buf_rw + sizeof (buf_rw))
+ {
+ fprintf (stderr, "Unable to compute a suitable address within buf_rw.\n");
+ exit (1);
+ }
+
+ mbuf_rw = mmap ((void *) addr, pagesize, PROT_READ,
+ MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0);
+
+ if (mbuf_rw == MAP_FAILED)
+ {
+ fprintf (stderr, "mmap #2 failed: %s.\n", strerror (errno));
+ exit (1);
+ }
+
+ /* With correct ulimit, etc. this should cause a core dump. */
+ abort ();
+}