festival/SOURCES/festival-2.5.0-siteinit.patch
2022-02-04 16:21:07 +00:00

158 lines
7.3 KiB
Diff

diff -u --recursive festival-vanilla/doc/festival.texi festival/doc/festival.texi
--- festival-vanilla/doc/festival.texi 2017-09-04 11:54:08.000000000 -0400
+++ festival/doc/festival.texi 2018-09-09 10:04:50.409877809 -0400
@@ -936,14 +936,15 @@
@cindex initialization
@cindex installation initialization
@cindex @file{init.scm}
-@cindex @file{siteinit.scm}
+@cindex @file{/etc/festival.scm}
+@cindex @file{/etc/festivalvars.scm}
Once compiled Festival may be further customized for particular sites.
At start up time Festival loads the file @file{init.scm} from its
library directory. This file further loads other necessary files such
as phoneset descriptions, duration parameters, intonation parameters,
definitions of voices etc. It will also load the files
-@file{sitevars.scm} and @file{siteinit.scm} if they exist.
-@file{sitevars.scm} is loaded after the basic Scheme library functions
+@file{/etc/festivalvars.scm} and @file{/etc/festival.scm} if they exist.
+@file{/etc/festivalvars.scm} is loaded after the basic Scheme library functions
are loaded but before any of the festival related functions are
loaded. This file is intended to set various path names before
various subsystems are loaded. Typically variables such
@@ -951,17 +952,17 @@
@code{voices_dir} (pointing to voice directories) should
be reset here if necessary.
-@cindex change libdir at run-time
+@cindex change libdir or datadir at run-time
@cindex run-time configuration
@cindex @code{load-path}
The default installation will try to find its lexicons and voices
automatically based on the value of @code{load-path} (this is derived
-from @code{FESTIVAL_HOME} at compilation time or by using the @code{--libdir}
+from @code{FESTIVAL_HOME} at compilation time or by using the @code{--datadir}
at run-time). If the voices and lexicons have been unpacked into
subdirectories of the library directory (the default) then no site
specific initialization of the above pathnames will be necessary.
-The second site specific file is @file{siteinit.scm}. Typical examples
+The second site specific file is @file{/etc/festival.scm}. Typical examples
of local initialization are as follows. The default audio output method
is NCD's NAS system if that is supported as that's what we use normally
in CSTR. If it is not supported, any hardware specific mode is the
@@ -969,7 +970,7 @@
But that default is just a setting in @file{init.scm}. If for example
in your environment you may wish the default audio output method to be
8k mulaw through @file{/dev/audio} you should add the following line to
-your @file{siteinit.scm} file
+your @file{/etc/festival.scm} file
@lisp
(Parameter.set 'Audio_Method 'sunaudio)
@end lisp
@@ -990,7 +991,7 @@
for sample rate and file type. When playing waveforms, Festival, by
default, outputs as unheadered waveform in native byte order. In this
example you would set up the default audio playing mechanism in
-@file{siteinit.scm} as follows
+@file{/etc/festival.scm} as follows
@lisp
(Parameter.set 'Audio_Method 'Audio_Command)
(Parameter.set 'Audio_Command "adplay -raw -r $SR $FILE")
@@ -1036,12 +1037,12 @@
depend on many things but due to various licence (and resource)
restrictions you may only have some diphone/nphone databases available
in your installation. The function name that is the value of
-@code{voice_default} is called immediately after @file{siteinit.scm} is
+@code{voice_default} is called immediately after @file{/etc/festival.scm} is
loaded offering the opportunity for you to change it. In
the standard distribution no change should be required. If you
download all the distributed voices @code{voice_rab_diphone} is
the default voice. You may change this for a site by adding
-the following to @file{siteinit.scm} or per person by changing
+the following to @file{/etc/festival.scm} or per person by changing
your @file{.festivalrc}. For example if you wish to
change the default voice to the American one @code{voice_ked_diphone}
@lisp
@@ -1085,7 +1086,9 @@
Copyright (C) University of Edinburgh, 1996-2003. All rights reserved.
For details type `(festival_warranty)'
festival> libdir
-"/projects/festival/lib/"
+"/usr/lib/festival"
+festival> datadir
+"/usr/share/festival"
festival> ^D
@end example
This should show the pathname you set in your @file{config/config}.
@@ -1106,7 +1109,7 @@
You have selected NAS as the audio output but have no server running on
that machine or your @code{DISPLAY} or @code{AUDIOSERVER} environment
variable is not set properly for your output device. Either set these
-properly or change the audio output device in @file{lib/siteinit.scm} as
+properly or change the audio output device in @file{lib/festival.scm} as
described above.
Ensure your audio device actually works the way you think it does. On
@@ -1136,7 +1139,7 @@
@code{voice_rab_diphone} (@file{festvox_rabxxxx.tar.gz}) is the default
voice and that @code{voice_ked_diphone} and @code{voice_don_diphone}
(@file{festvox_kedxxxx.tar.gz} and @file{festvox_don.tar.gz}) are
-installed. Also local settings in your @file{festival/lib/siteinit.scm}
+installed. Also local settings in your @file{/etc/festival.scm}
may affect these tests. However, after installation it may
be worth trying
@example
Only in festival/doc: festival.texi.orig
Only in festival-vanilla/: festival
diff -u --recursive festival-vanilla/lib/init.scm festival/lib/init.scm
--- festival-vanilla/lib/init.scm 2017-09-04 11:54:08.000000000 -0400
+++ festival/lib/init.scm 2018-09-09 10:04:50.406877794 -0400
@@ -42,6 +42,10 @@
"home-directory
Place looked at for .festivalrc etc.")
+;;; system-wide startup initialization
+(if (probe_file (path-append sysconfdir "festivalvars.scm"))
+ (load (path-append sysconfdir "festivalvars.scm")))
+
;;; User startup initialization, can be used to override load-path
;;; to allow alternate basic modules to be loaded.
(if (probe_file (path-append home-directory ".siodvarsrc"))
@@ -50,11 +54,6 @@
(if (probe_file (path-append home-directory ".festivalvarsrc"))
(load (path-append home-directory ".festivalvarsrc")))
-;;; A chance to set various variables to a local setting e.g.
-;;; lexdir, voices_dir audio etc etc.
-(if (probe_file (path-append libdir "sitevars.scm"))
- (load (path-append libdir "sitevars.scm")))
-
;;; CSTR siod extensions
(require 'cstr)
@@ -135,8 +134,8 @@
;;;
;;; Local site initialization, if the file exists load it
;;;
-(if (probe_file (path-append libdir "siteinit.scm"))
- (load (path-append libdir "siteinit.scm")))
+(if (probe_file (path-append sysconfdir "festival.scm"))
+ (load (path-append sysconfdir "festival.scm")))
;;; User initialization, if a user has a personal customization
;;; file loaded it
diff -u --recursive festival-vanilla/lib/synthesis.scm festival/lib/synthesis.scm
--- festival-vanilla/lib/synthesis.scm 2017-09-04 11:54:08.000000000 -0400
+++ festival/lib/synthesis.scm 2018-09-09 10:04:50.380877660 -0400
@@ -68,7 +68,7 @@
The default list of functions to be run on all synthesized utterances
after Wave_Synth. This will normally be nil but if for some reason you
need to change the gain or rescale *all* waveforms you could set the
- function here, in your siteinit.scm.")
+ function here, in your /etc/festival.scm.")
(defvar after_synth_hooks default_after_synth_hooks
"after_synth_hooks
Only in festival/src/arch/festival: festival.cc.orig