e2fsprogs/e2fsprogs-1.41.4-ext4-resize-fixes.patch
2009-04-22 16:06:01 +00:00

242 lines
8.7 KiB
Diff

3 patches from the list to address resize issues (18 Apr 2009):
When allocating a new set of block group metadata as part of growing
the filesystem, the resize2fs code assumes that the bitmap and inode
table blocks are in their own block group; an assumption which is
changed by the flex_bg feature. This commit works around the problem
by temporarily turning off flex_bg while allocating the new block
group metadata, to avoid potentially overwriting previously allocated
data blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
If we need to shrink the inode table, we need to make sure the inodes
contained in the part of the inode table we are vacating don't get
reused as part of the filesystem shrink operation. This wasn't a
problem with ext3 filesystems, since the inode table was located in
the block group that was going away, so that location was not eligible
for reallocation.
However with ext4 filesystems with flex_bg enabled, it's possible for
a portion of the inode table in the last flex_bg group to be
deallocated, but in a part of the filesystem which could be used as
data blocks. So we must mark those blocks as reserved to prevent
their reuse, and adjust the minimum filesystem size calculation to
assure that we don't shrink a filesystem too small for the resize
operation to succeed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
Due to a fencepost bug, when skipping a block group whose block bitmap
was uninitialized (and hence could not contain any blocks eligible for
relaocation), the block immediately following the block group wasn't
checked as well. If it was in use and required relocation, it
wouldn't get properly relocated, with the result that an inode using
such a block would end up, post resize, with a pointer to a block now
outside the bounds of the filesystem.
This commit fixes this fencepost error.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
Index: e2fsprogs-1.41.4/resize/resize2fs.c
===================================================================
--- e2fsprogs-1.41.4.orig/resize/resize2fs.c
+++ e2fsprogs-1.41.4/resize/resize2fs.c
@@ -233,20 +233,29 @@ static void fix_uninit_block_bitmaps(ext
/*
* If the group descriptor's bitmap and inode table blocks are valid,
- * release them in the specified filesystem data structure
+ * release them in the new filesystem data structure, and mark them as
+ * reserved so the old inode table blocks don't get overwritten.
*/
-static void free_gdp_blocks(ext2_filsys fs, struct ext2_group_desc *gdp)
+static void free_gdp_blocks(ext2_filsys fs,
+ ext2fs_block_bitmap reserve_blocks,
+ struct ext2_group_desc *gdp)
{
blk_t blk;
int j;
if (gdp->bg_block_bitmap &&
- (gdp->bg_block_bitmap < fs->super->s_blocks_count))
+ (gdp->bg_block_bitmap < fs->super->s_blocks_count)) {
ext2fs_block_alloc_stats(fs, gdp->bg_block_bitmap, -1);
+ ext2fs_mark_block_bitmap(reserve_blocks,
+ gdp->bg_block_bitmap);
+ }
if (gdp->bg_inode_bitmap &&
- (gdp->bg_inode_bitmap < fs->super->s_blocks_count))
+ (gdp->bg_inode_bitmap < fs->super->s_blocks_count)) {
ext2fs_block_alloc_stats(fs, gdp->bg_inode_bitmap, -1);
+ ext2fs_mark_block_bitmap(reserve_blocks,
+ gdp->bg_inode_bitmap);
+ }
if (gdp->bg_inode_table == 0 ||
(gdp->bg_inode_table >= fs->super->s_blocks_count))
@@ -257,14 +266,19 @@ static void free_gdp_blocks(ext2_filsys
if (blk >= fs->super->s_blocks_count)
break;
ext2fs_block_alloc_stats(fs, blk, -1);
+ ext2fs_mark_block_bitmap(reserve_blocks, blk);
}
}
/*
* This routine is shared by the online and offline resize routines.
* All of the information which is adjusted in memory is done here.
+ *
+ * The reserve_blocks parameter is only needed when shrinking the
+ * filesystem.
*/
-errcode_t adjust_fs_info(ext2_filsys fs, ext2_filsys old_fs, blk_t new_size)
+errcode_t adjust_fs_info(ext2_filsys fs, ext2_filsys old_fs,
+ ext2fs_block_bitmap reserve_blocks, blk_t new_size)
{
errcode_t retval;
int overhead = 0;
@@ -399,8 +413,8 @@ retry:
}
/*
- * If we are shrinking the number block groups, we're done and
- * can exit now.
+ * If we are shrinking the number of block groups, we're done
+ * and can exit now.
*/
if (old_fs->group_desc_count > fs->group_desc_count) {
/*
@@ -409,7 +423,8 @@ retry:
*/
for (i = fs->group_desc_count;
i < old_fs->group_desc_count; i++) {
- free_gdp_blocks(fs, &old_fs->group_desc[i]);
+ free_gdp_blocks(fs, reserve_blocks,
+ &old_fs->group_desc[i]);
}
retval = 0;
goto errout;
@@ -550,7 +565,12 @@ static errcode_t adjust_superblock(ext2_
ext2fs_mark_bb_dirty(fs);
ext2fs_mark_ib_dirty(fs);
- retval = adjust_fs_info(fs, rfs->old_fs, new_size);
+ retval = ext2fs_allocate_block_bitmap(fs, _("reserved blocks"),
+ &rfs->reserve_blocks);
+ if (retval)
+ return retval;
+
+ retval = adjust_fs_info(fs, rfs->old_fs, rfs->reserve_blocks, new_size);
if (retval)
goto errout;
@@ -746,17 +766,13 @@ static errcode_t blocks_to_move(ext2_res
errcode_t retval;
ext2_filsys fs, old_fs;
ext2fs_block_bitmap meta_bmap;
+ __u32 save_incompat_flag;
fs = rfs->new_fs;
old_fs = rfs->old_fs;
if (old_fs->super->s_blocks_count > fs->super->s_blocks_count)
fs = rfs->old_fs;
- retval = ext2fs_allocate_block_bitmap(fs, _("reserved blocks"),
- &rfs->reserve_blocks);
- if (retval)
- return retval;
-
retval = ext2fs_allocate_block_bitmap(fs, _("blocks to be moved"),
&rfs->move_blocks);
if (retval)
@@ -788,7 +804,7 @@ static errcode_t blocks_to_move(ext2_res
* to the next block group.
*/
blk = ((g+1) * fs->super->s_blocks_per_group) +
- fs->super->s_first_data_block;
+ fs->super->s_first_data_block - 1;
continue;
}
if (ext2fs_test_block_bitmap(old_fs->block_map, blk) &&
@@ -890,9 +906,29 @@ static errcode_t blocks_to_move(ext2_res
/*
* Allocate the missing data structures
+ *
+ * XXX We have a problem with FLEX_BG and off-line
+ * resizing where we are growing the size of the
+ * filesystem. ext2fs_allocate_group_table() will try
+ * to reserve the inode table in the desired flex_bg
+ * location. However, passing rfs->reserve_blocks
+ * doesn't work since it only has reserved the blocks
+ * that will be used in the new block group -- and
+ * with flex_bg, we can and will allocate the tables
+ * outside of the block group. And we can't pass in
+ * the fs->block_map because it doesn't handle
+ * overlapping inode table movements right. So for
+ * now, we temporarily disable flex_bg to force
+ * ext2fs_allocate_group_tables() to allocate the bg
+ * metadata in side the block group, and the restore
+ * it afterwards. Ugly, until we can fix this up
+ * right later.
*/
+ save_incompat_flag = fs->super->s_feature_incompat;
+ fs->super->s_feature_incompat &= ~EXT4_FEATURE_INCOMPAT_FLEX_BG;
retval = ext2fs_allocate_group_table(fs, i,
rfs->reserve_blocks);
+ fs->super->s_feature_incompat = save_incompat_flag;
if (retval)
goto errout;
@@ -1857,6 +1893,19 @@ blk_t calculate_minimum_resize_size(ext2
data_needed -= SUPER_OVERHEAD(fs) * num_of_superblocks;
data_needed -= META_OVERHEAD(fs) * fs->group_desc_count;
+ if (fs->super->s_feature_incompat & EXT4_FEATURE_INCOMPAT_FLEX_BG) {
+ /*
+ * For ext4 we need to allow for up to a flex_bg worth
+ * of inode tables of slack space so the resize
+ * operation can be guaranteed to finish.
+ */
+ int flexbg_size = 1 << fs->super->s_log_groups_per_flex;
+ int extra_groups;
+
+ extra_groups = flexbg_size - (groups & (flexbg_size - 1));
+ data_needed += META_OVERHEAD(fs) * extra_groups;
+ }
+
/*
* figure out how many data blocks we have given the number of groups
* we need for our inodes
Index: e2fsprogs-1.41.4/resize/online.c
===================================================================
--- e2fsprogs-1.41.4.orig/resize/online.c
+++ e2fsprogs-1.41.4/resize/online.c
@@ -104,7 +104,7 @@ errcode_t online_resize_fs(ext2_filsys f
* but at least it allows on-line resizing to function.
*/
new_fs->super->s_feature_incompat &= ~EXT4_FEATURE_INCOMPAT_FLEX_BG;
- retval = adjust_fs_info(new_fs, fs, *new_size);
+ retval = adjust_fs_info(new_fs, fs, 0, *new_size);
if (retval)
return retval;
Index: e2fsprogs-1.41.4/resize/resize2fs.h
===================================================================
--- e2fsprogs-1.41.4.orig/resize/resize2fs.h
+++ e2fsprogs-1.41.4/resize/resize2fs.h
@@ -128,6 +128,7 @@ extern errcode_t resize_fs(ext2_filsys f
unsigned long max));
extern errcode_t adjust_fs_info(ext2_filsys fs, ext2_filsys old_fs,
+ ext2fs_block_bitmap reserve_blocks,
blk_t new_size);
extern blk_t calculate_minimum_resize_size(ext2_filsys fs);