dracut/0012-dracut-functions.sh-removed-non-dracut-install-shell.patch
Harald Hoyer f8c4a0f4e5 dracut-031-22.git20130809
- lsinitrd.sh: add old cpio signature
- dracut.sh: call find with -print0 and cpio with --null
- dracut.asc: small corrections
- systemd/dracut-initqueue.sh: continue to boot if finished failed
- dracut.sh/dracut-functions.sh: handle root on non-block device
- dracut-functions.sh: removed non dracut-install shell functions
- dracut-functions.sh: inst_multiple == dracut_install
- 51-dracut-rescue.install: fixed rescue image creation
- dracut.sh: do not strip in FIPS mode
Resolves: rhbz#990250
- dracut.sh: check the value of --kver
- crypt: Fix typo--/etc/crypttab not /etc/cryptab
- network/net-lib.sh: fix ibft interface configuration
- iscsi/module-setup.sh: install some modules regardless of hostonly
- multipath: need_shutdown if multipath devices exist
Resolves: rhbz#994913
- omit drivers fix
2013-08-09 14:21:29 +02:00

355 lines
14 KiB
Diff

From 55a0b3abc7b8da4f3714cfcb5d34f7aa4e78e5bc Mon Sep 17 00:00:00 2001
From: Harald Hoyer <harald@redhat.com>
Date: Mon, 5 Aug 2013 11:47:54 +0200
Subject: [PATCH] dracut-functions.sh: removed non dracut-install shell
functions
---
dracut-functions.sh | 315 ++++++++++------------------------------------------
1 file changed, 56 insertions(+), 259 deletions(-)
diff --git a/dracut-functions.sh b/dracut-functions.sh
index dee53bb..c0a12cd 100755
--- a/dracut-functions.sh
+++ b/dracut-functions.sh
@@ -55,14 +55,6 @@ if ! [[ $dracutbasedir ]]; then
dracutbasedir="$(readlink -f $dracutbasedir)"
fi
-if ! [[ $DRACUT_INSTALL ]]; then
- DRACUT_INSTALL=$(find_binary dracut-install)
-fi
-
-if ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/dracut-install ]]; then
- DRACUT_INSTALL=$dracutbasedir/dracut-install
-fi
-
# Detect lib paths
if ! [[ $libdirs ]] ; then
if [[ "$(ldd /bin/sh)" == */lib64/* ]] &>/dev/null \
@@ -588,268 +580,73 @@ fs_get_option() {
done
}
-if [[ $DRACUT_INSTALL ]]; then
- [[ $DRACUT_RESOLVE_LAZY ]] || export DRACUT_RESOLVE_DEPS=1
- inst_dir() {
- [[ -e ${initdir}/"$1" ]] && return 0 # already there
- $DRACUT_INSTALL ${initdir+-D "$initdir"} -d "$@"
- (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} -d "$@" || :
- }
-
- inst() {
- [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
- #dinfo "$DRACUT_INSTALL -l $@"
- $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
- (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
- }
-
- inst_simple() {
- [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
- [[ -e $1 ]] || return 1 # no source
- $DRACUT_INSTALL ${initdir+-D "$initdir"} "$@"
- (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} "$@" || :
- }
-
- inst_symlink() {
- [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
- [[ -L $1 ]] || return 1
- $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
- (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
- }
-
- dracut_install() {
- local ret
- #dinfo "initdir=$initdir $DRACUT_INSTALL -l $@"
- $DRACUT_INSTALL ${initdir+-D "$initdir"} -a ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
- ret=$?
- (($ret != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} -a ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
- return $ret
- }
-
- inst_library() {
- [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
- [[ -e $1 ]] || return 1 # no source
- $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
- (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
- }
-
- inst_binary() {
- $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
- (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
- }
-
- inst_script() {
- $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
- (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
- }
-
-else
-
- # Install a directory, keeping symlinks as on the original system.
- # Example: if /lib points to /lib64 on the host, "inst_dir /lib/file"
- # will create ${initdir}/lib64, ${initdir}/lib64/file,
- # and a symlink ${initdir}/lib -> lib64.
- inst_dir() {
- [[ -e ${initdir}/"$1" ]] && return 0 # already there
-
- local _dir="$1" _part="${1%/*}" _file
- while [[ "$_part" != "${_part%/*}" ]] && ! [[ -e "${initdir}/${_part}" ]]; do
- _dir="$_part $_dir"
- _part=${_part%/*}
- done
-
- # iterate over parent directories
- for _file in $_dir; do
- [[ -e "${initdir}/$_file" ]] && continue
- if [[ -L $_file ]]; then
- inst_symlink "$_file"
- else
- # create directory
- mkdir -m 0755 -p "${initdir}/$_file" || return 1
- [[ -e "$_file" ]] && chmod --reference="$_file" "${initdir}/$_file"
- chmod u+w "${initdir}/$_file"
- fi
- done
- }
- # $1 = file to copy to ramdisk
- # $2 (optional) Name for the file on the ramdisk
- # Location of the image dir is assumed to be $initdir
- # We never overwrite the target if it exists.
- inst_simple() {
- [[ -f "$1" ]] || return 1
- [[ "$1" == */* ]] || return 1
- local _src=$1 _target="${2:-$1}"
-
- [[ -L $_src ]] && { inst_symlink $_src $_target; return $?; }
-
- if ! [[ -d ${initdir}/$_target ]]; then
- [[ -e ${initdir}/$_target ]] && return 0
- [[ -L ${initdir}/$_target ]] && return 0
- [[ -d "${initdir}/${_target%/*}" ]] || inst_dir "${_target%/*}"
- fi
- if [[ $DRACUT_FIPS_MODE ]]; then
- # install checksum files also
- if [[ -e "${_src%/*}/.${_src##*/}.hmac" ]]; then
- inst "${_src%/*}/.${_src##*/}.hmac" "${_target%/*}/.${_target##*/}.hmac"
- fi
- if [[ -e "/lib/fipscheck/${_src##*/}.hmac" ]]; then
- inst "/lib/fipscheck/${_src##*/}.hmac" "/lib/fipscheck/${_target##*/}.hmac"
- fi
- if [[ -e "/lib64/fipscheck/${_src##*/}.hmac" ]]; then
- inst "/lib64/fipscheck/${_src##*/}.hmac" "/lib64/fipscheck/${_target##*/}.hmac"
- fi
- fi
- ddebug "Installing $_src"
- cp --reflink=auto --sparse=auto -pfL "$_src" "${initdir}/$_target"
- }
+if ! [[ $DRACUT_INSTALL ]]; then
+ DRACUT_INSTALL=$(find_binary dracut-install)
+fi
- # same as above, but specialized for symlinks
- inst_symlink() {
- local _src=$1 _target=${2:-$1} _realsrc
- [[ "$1" == */* ]] || return 1
- [[ -L $1 ]] || return 1
- [[ -L $initdir/$_target ]] && return 0
- _realsrc=$(readlink -f "$_src")
- if ! [[ -e $initdir/$_realsrc ]]; then
- if [[ -d $_realsrc ]]; then
- inst_dir "$_realsrc"
- else
- inst "$_realsrc"
- fi
- fi
- [[ ! -e $initdir/${_target%/*} ]] && inst_dir "${_target%/*}"
+if ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/dracut-install ]]; then
+ DRACUT_INSTALL=$dracutbasedir/dracut-install
+fi
- ln_r "${_realsrc}" "${_target}"
- }
+if ! [[ -x $DRACUT_INSTALL ]]; then
+ dfatal "dracut-install not found!"
+ exit 10
+fi
- # Same as above, but specialized to handle dynamic libraries.
- # It handles making symlinks according to how the original library
- # is referenced.
- inst_library() {
- local _src="$1" _dest=${2:-$1} _lib _reallib _symlink
- [[ "$1" == */* ]] || return 1
- [[ -e $initdir/$_dest ]] && return 0
- if [[ -L $_src ]]; then
- if [[ $DRACUT_FIPS_MODE ]]; then
- # install checksum files also
- if [[ -e "${_src%/*}/.${_src##*/}.hmac" ]]; then
- inst "${_src%/*}/.${_src##*/}.hmac" "${_dest%/*}/.${_dest##*/}.hmac"
- fi
- if [[ -e "/lib/fipscheck/${_src##*/}.hmac" ]]; then
- inst "/lib/fipscheck/${_src##*/}.hmac" "/lib/fipscheck/${_dest##*/}.hmac"
- fi
- if [[ -e "/lib64/fipscheck/${_src##*/}.hmac" ]]; then
- inst "/lib64/fipscheck/${_src##*/}.hmac" "/lib64/fipscheck/${_dest##*/}.hmac"
- fi
- fi
- _reallib=$(readlink -f "$_src")
- inst_simple "$_reallib" "$_reallib"
- inst_dir "${_dest%/*}"
- ln_r "${_reallib}" "${_dest}"
- else
- inst_simple "$_src" "$_dest"
- fi
+[[ $DRACUT_RESOLVE_LAZY ]] || export DRACUT_RESOLVE_DEPS=1
+inst_dir() {
+ [[ -e ${initdir}/"$1" ]] && return 0 # already there
+ $DRACUT_INSTALL ${initdir+-D "$initdir"} -d "$@"
+ (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} -d "$@" || :
+}
- # Create additional symlinks. See rev_symlinks description.
- for _symlink in $(rev_lib_symlinks $_src) $(rev_lib_symlinks $_reallib); do
- [[ ! -e $initdir/$_symlink ]] && {
- ddebug "Creating extra symlink: $_symlink"
- inst_symlink $_symlink
- }
- done
- }
+inst() {
+ [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
+ #dinfo "$DRACUT_INSTALL -l $@"
+ $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
+ (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
+}
- # Same as above, but specialized to install binary executables.
- # Install binary executable, and all shared library dependencies, if any.
- inst_binary() {
- local _bin _target
- _bin=$(find_binary "$1") || return 1
- _target=${2:-$_bin}
- [[ -e $initdir/$_target ]] && return 0
- local _file _line
- local _so_regex='([^ ]*/lib[^/]*/[^ ]*\.so[^ ]*)'
- # I love bash!
- LC_ALL=C ldd "$_bin" 2>/dev/null | while read _line; do
- [[ $_line = 'not a dynamic executable' ]] && break
-
- if [[ $_line =~ $_so_regex ]]; then
- _file=${BASH_REMATCH[1]}
- [[ -e ${initdir}/$_file ]] && continue
- inst_library "$_file"
- continue
- fi
+inst_simple() {
+ [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
+ [[ -e $1 ]] || return 1 # no source
+ $DRACUT_INSTALL ${initdir+-D "$initdir"} "$@"
+ (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} "$@" || :
+}
- if [[ $_line == *not\ found* ]]; then
- dfatal "Missing a shared library required by $_bin."
- dfatal "Run \"ldd $_bin\" to find out what it is."
- dfatal "$_line"
- dfatal "dracut cannot create an initrd."
- exit 1
- fi
- done
- inst_simple "$_bin" "$_target"
- }
+inst_symlink() {
+ [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
+ [[ -L $1 ]] || return 1
+ $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
+ (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
+}
- # same as above, except for shell scripts.
- # If your shell script does not start with shebang, it is not a shell script.
- inst_script() {
- local _bin
- _bin=$(find_binary "$1") || return 1
- shift
- local _line _shebang_regex
- read -r -n 80 _line <"$_bin"
- # If debug is set, clean unprintable chars to prevent messing up the term
- [[ $debug ]] && _line=$(echo -n "$_line" | tr -c -d '[:print:][:space:]')
- _shebang_regex='(#! *)(/[^ ]+).*'
- [[ $_line =~ $_shebang_regex ]] || return 1
- inst "${BASH_REMATCH[2]}" && inst_simple "$_bin" "$@"
- }
+dracut_install() {
+ local ret
+ #dinfo "initdir=$initdir $DRACUT_INSTALL -l $@"
+ $DRACUT_INSTALL ${initdir+-D "$initdir"} -a ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
+ ret=$?
+ (($ret != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} -a ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
+ return $ret
+}
- # general purpose installation function
- # Same args as above.
- inst() {
- local _x
-
- case $# in
- 1) ;;
- 2) [[ ! $initdir && -d $2 ]] && export initdir=$2
- [[ $initdir = $2 ]] && set $1;;
- 3) [[ -z $initdir ]] && export initdir=$2
- set $1 $3;;
- *) dfatal "inst only takes 1 or 2 or 3 arguments"
- exit 1;;
- esac
- for _x in inst_symlink inst_script inst_binary inst_simple; do
- $_x "$@" && return 0
- done
- return 1
- }
+inst_library() {
+ [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
+ [[ -e $1 ]] || return 1 # no source
+ $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
+ (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
+}
- # dracut_install [-o ] <file> [<file> ... ]
- # Install <file> to the initramfs image
- # -o optionally install the <file> and don't fail, if it is not there
- dracut_install() {
- local _optional=no
- if [[ $1 = '-o' ]]; then
- _optional=yes
- shift
- fi
- while (($# > 0)); do
- if ! inst "$1" ; then
- if [[ $_optional = yes ]]; then
- dinfo "Skipping program $1 as it cannot be found and is" \
- "flagged to be optional"
- else
- dfatal "Failed to install $1"
- exit 1
- fi
- fi
- shift
- done
- }
+inst_binary() {
+ $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
+ (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
+}
-fi
+inst_script() {
+ $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@"
+ (($? != 0)) && derror $DRACUT_INSTALL ${initdir+-D "$initdir"} ${DRACUT_RESOLVE_DEPS+-l} ${DRACUT_FIPS_MODE+-H} "$@" || :
+}
# find symlinks linked to given library file
# $1 = library file