dracut/SOURCES/0075.patch

427 lines
14 KiB
Diff
Raw Normal View History

2020-07-28 12:50:12 +00:00
From cf74193cc37f2ace1197b1e6ebacc6fe542767c8 Mon Sep 17 00:00:00 2001
From: Kairui Song <kasong@redhat.com>
Date: Wed, 8 Apr 2020 16:39:52 +0800
Subject: [PATCH] Remove memtrace-ko and rd.memdebug=4 support in dracut
This feature could be off loaded to memstrack, which have better
accurecy, better performance, and have more detailed tracing features.
Also simplify make_trace_mem a bit.
And currently rd.memdebug=4 is unstable, fails from time to time.
(cherry picked from commit 49c4172f4eef6e2015615e132b199a7ec0699ffc)
Resolves: #1829528
---
dracut.cmdline.7.asc | 4 +-
modules.d/98dracut-systemd/dracut-cmdline.sh | 2 +-
modules.d/98dracut-systemd/dracut-pre-mount.sh | 2 +-
modules.d/98dracut-systemd/dracut-pre-pivot.sh | 2 +-
modules.d/98dracut-systemd/dracut-pre-trigger.sh | 2 +-
modules.d/99base/dracut-lib.sh | 44 +-----
modules.d/99base/init.sh | 8 +-
modules.d/99base/memtrace-ko.sh | 191 -----------------------
modules.d/99base/module-setup.sh | 1 -
9 files changed, 18 insertions(+), 238 deletions(-)
diff --git a/dracut.cmdline.7.asc b/dracut.cmdline.7.asc
index ab9a24ad..0dc58d1a 100644
--- a/dracut.cmdline.7.asc
+++ b/dracut.cmdline.7.asc
@@ -187,9 +187,9 @@ It should be attached to any report about dracut problems.
_/run/initramfs/init.log_.
If "quiet" is set, it also logs to the console.
-**rd.memdebug=[0-4]**::
+**rd.memdebug=[0-3]**::
Print memory usage info at various points, set the verbose level from 0 to 4.
-+
++
Higher level means more debugging output:
+
----
diff --git a/modules.d/98dracut-systemd/dracut-cmdline.sh b/modules.d/98dracut-systemd/dracut-cmdline.sh
index bff9435a..6c6ee026 100755
--- a/modules.d/98dracut-systemd/dracut-cmdline.sh
+++ b/modules.d/98dracut-systemd/dracut-cmdline.sh
@@ -42,7 +42,7 @@ export root
export rflags
export fstype
-make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab' '4+:komem'
+make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
# run scriptlets to parse the command line
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
diff --git a/modules.d/98dracut-systemd/dracut-pre-mount.sh b/modules.d/98dracut-systemd/dracut-pre-mount.sh
index a3b9d291..ae511286 100755
--- a/modules.d/98dracut-systemd/dracut-pre-mount.sh
+++ b/modules.d/98dracut-systemd/dracut-pre-mount.sh
@@ -8,7 +8,7 @@ type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
-make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
+make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-mount' 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
diff --git a/modules.d/98dracut-systemd/dracut-pre-pivot.sh b/modules.d/98dracut-systemd/dracut-pre-pivot.sh
index dc9a2504..96e6f8ca 100755
--- a/modules.d/98dracut-systemd/dracut-pre-pivot.sh
+++ b/modules.d/98dracut-systemd/dracut-pre-pivot.sh
@@ -8,7 +8,7 @@ type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
-make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
+make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-pivot' 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
diff --git a/modules.d/98dracut-systemd/dracut-pre-trigger.sh b/modules.d/98dracut-systemd/dracut-pre-trigger.sh
index 7cd821ed..a1a33960 100755
--- a/modules.d/98dracut-systemd/dracut-pre-trigger.sh
+++ b/modules.d/98dracut-systemd/dracut-pre-trigger.sh
@@ -8,7 +8,7 @@ type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
-make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
+make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
source_hook pre-trigger
diff --git a/modules.d/99base/dracut-lib.sh b/modules.d/99base/dracut-lib.sh
index f71e757c..502c7568 100755
--- a/modules.d/99base/dracut-lib.sh
+++ b/modules.d/99base/dracut-lib.sh
@@ -1220,50 +1220,25 @@ are_lists_eq() {
setmemdebug() {
if [ -z "$DEBUG_MEM_LEVEL" ]; then
- export DEBUG_MEM_LEVEL=$(getargnum 0 0 4 rd.memdebug)
+ export DEBUG_MEM_LEVEL=$(getargnum 0 0 3 rd.memdebug)
fi
}
setmemdebug
-cleanup_trace_mem()
-{
- # tracekomem based on kernel trace needs cleanup after use.
- if [ "$DEBUG_MEM_LEVEL" -eq 4 ]; then
- tracekomem --cleanup
- fi
-}
-
-# parameters: msg [trace_level:trace]...
-make_trace_mem()
-{
- local msg
- msg="$1"
- shift
- if [ -n "$DEBUG_MEM_LEVEL" ] && [ "$DEBUG_MEM_LEVEL" -gt 0 ]; then
- make_trace show_memstats $DEBUG_MEM_LEVEL "[debug_mem]" "$msg" "$@" >&2
- fi
-}
-
# parameters: func log_level prefix msg [trace_level:trace]...
-make_trace()
+make_trace_mem()
{
- local func log_level prefix msg msg_printed
+ local log_level prefix msg msg_printed
local trace trace_level trace_in_higher_levels insert_trace
- func=$1
- shift
-
- log_level=$1
- shift
-
- prefix=$1
- shift
-
msg=$1
shift
- if [ -z "$log_level" ]; then
+ prefix='[debug_mem]'
+ log_level=$DEBUG_MEM_LEVEL
+
+ if [ -z "$log_level" ] || [ "$log_level" -le 0 ]; then
return
fi
@@ -1296,7 +1271,7 @@ make_trace()
echo "$prefix $msg"
msg_printed=1
fi
- $func $trace
+ show_memstats $trace
fi
shift
done
@@ -1318,9 +1293,6 @@ show_memstats()
iomem)
cat /proc/iomem
;;
- komem)
- tracekomem
- ;;
esac
}
diff --git a/modules.d/99base/init.sh b/modules.d/99base/init.sh
index e4f7cff1..2c0ccd66 100755
--- a/modules.d/99base/init.sh
+++ b/modules.d/99base/init.sh
@@ -131,7 +131,7 @@ if ! getargbool 1 'rd.hostonly'; then
fi
# run scriptlets to parse the command line
-make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab' '4+:komem'
+make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
@@ -160,7 +160,7 @@ fi
udevproperty "hookdir=$hookdir"
-make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
+make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-trigger' -d 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break before pre-trigger"
source_hook pre-trigger
@@ -230,7 +230,7 @@ unset RDRETRY
# pre-mount happens before we try to mount the root filesystem,
# and happens once.
-make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
+make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-mount' -d 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
@@ -266,7 +266,7 @@ done
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
-make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
+make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-pivot' -d 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
diff --git a/modules.d/99base/memtrace-ko.sh b/modules.d/99base/memtrace-ko.sh
deleted file mode 100755
index ee035e15..00000000
--- a/modules.d/99base/memtrace-ko.sh
+++ /dev/null
@@ -1,191 +0,0 @@
-#!/bin/sh
-
-# Try to find out kernel modules with large total memory allocation during loading.
-# For large slab allocation, it will fall into buddy, also not trace "mm_page_free"
-# considering large free is quite rare for module_init, thus saving tons of events
-# to avoid trace data overwritten.
-#
-# Therefore, tracing "mm_page_alloc"alone should be enough for the purpose.
-
-# "sys/kernel/tracing" has the priority if exists.
-get_trace_base() {
- # trace access through debugfs would be obsolete if "/sys/kernel/tracing" is available.
- if [ -d "/sys/kernel/tracing" ]; then
- echo "/sys/kernel"
- else
- echo "/sys/kernel/debug"
- fi
-}
-
-# We want to enable these trace events.
-get_want_events() {
- echo "module:module_put module:module_load kmem:mm_page_alloc"
-}
-
-get_event_filter() {
- echo "comm == systemd-udevd || comm == modprobe || comm == insmod"
-}
-
-is_trace_ready() {
- local trace_base want_events current_events
-
- trace_base=$(get_trace_base)
- ! [ -f "$trace_base/tracing/trace" ] && return 1
-
- [ "$(cat $trace_base/tracing/tracing_on)" -eq 0 ] && return 1
-
- # Also check if trace events were properly setup.
- want_events=$(get_want_events)
- current_events=$(echo $(cat $trace_base/tracing/set_event))
- [ "$current_events" != "$want_events" ] && return 1
-
- return 0
-}
-
-prepare_trace() {
- local trace_base
-
- trace_base=$(get_trace_base)
- # old debugfs interface case.
- if ! [ -d "$trace_base/tracing" ]; then
- mount none -t debugfs $trace_base
- # new tracefs interface case.
- elif ! [ -f "$trace_base/tracing/trace" ]; then
- mount none -t tracefs "$trace_base/tracing"
- fi
-
- if ! [ -f "$trace_base/tracing/trace" ]; then
- echo "WARN: Mount trace failed for kernel module memory analyzing."
- return 1
- fi
-
- # Active all the wanted trace events.
- echo "$(get_want_events)" > $trace_base/tracing/set_event
-
- # There are three kinds of known applications for module loading:
- # "systemd-udevd", "modprobe" and "insmod".
- # Set them as the global events filter.
- # NOTE: Some kernel may not support this format of filter, anyway
- # the operation will fail and it doesn't matter.
- echo "$(get_event_filter)" > $trace_base/tracing/events/kmem/filter 2>&1
- echo "$(get_event_filter)" > $trace_base/tracing/events/module/filter 2>&1
-
- # Set the number of comm-pid if supported.
- if [ -f "$trace_base/tracing/saved_cmdlines_size" ]; then
- # Thanks to filters, 4096 is big enough(also well supported).
- echo 4096 > $trace_base/tracing/saved_cmdlines_size
- fi
-
- # Enable and clear trace data for the first time.
- echo 1 > $trace_base/tracing/tracing_on
- echo > $trace_base/tracing/trace
- echo "Prepare trace success."
- return 0
-}
-
-order_to_pages()
-{
- local pages=1
- local order=$1
-
- while [ "$order" != 0 ]; do
- order=$((order-1))
- pages=$(($pages*2))
- done
-
- echo $pages
-}
-
-parse_trace_data() {
- local module_name tmp_eval pages
-
- cat "$(get_trace_base)/tracing/trace" | while read pid cpu flags ts function args
- do
- # Skip comment lines
- if [ "$pid" = "#" ]; then
- continue
- fi
-
- pid=${pid##*-}
- function=${function%:}
- if [ "$function" = "module_load" ]; then
- # One module is being loaded, save the task pid for tracking.
- # Remove the trailing after whitespace, there may be the module flags.
- module_name=${args%% *}
- # Mark current_module to track the task.
- eval current_module_$pid="$module_name"
- tmp_eval=$(eval echo '${module_loaded_'${module_name}'}')
- if [ -n "$tmp_eval" ]; then
- echo "WARN: \"$module_name\" was loaded multiple times!"
- fi
- eval unset module_loaded_$module_name
- eval nr_alloc_pages_$module_name=0
- continue
- fi
-
- module_name=$(eval echo '${current_module_'${pid}'}')
- if [ -z "$module_name" ]; then
- continue
- fi
-
- # Once we get here, the task is being tracked(is loading a module).
- if [ "$function" = "module_put" ]; then
- # Mark the module as loaded when the first module_put event happens after module_load.
- tmp_eval=$(eval echo '${nr_alloc_pages_'${module_name}'}')
- echo "$tmp_eval pages consumed by \"$module_name\""
- eval module_loaded_$module_name=1
- # Module loading finished, so untrack the task.
- eval unset current_module_$pid
- eval unset nr_alloc_pages_$module_name
- continue
- fi
-
- if [ "$function" = "mm_page_alloc" ]; then
- # Get order first, then convert to actual pages.
- pages=$(echo $args | sed -e 's/.*order=\([0-9]*\) .*/\1/')
- pages=$(order_to_pages "$pages")
- tmp_eval=$(eval echo '${nr_alloc_pages_'${module_name}'}')
- eval nr_alloc_pages_$module_name="$(($tmp_eval+$pages))"
- fi
- done
-}
-
-cleanup_trace() {
- local trace_base
-
- if is_trace_ready; then
- trace_base=$(get_trace_base)
- echo 0 > $trace_base/tracing/tracing_on
- echo > $trace_base/tracing/trace
- echo > $trace_base/tracing/set_event
- echo 0 > $trace_base/tracing/events/kmem/filter
- echo 0 > $trace_base/tracing/events/module/filter
- fi
-}
-
-show_usage() {
- echo "Find out kernel modules with large memory consumption during loading based on trace."
- echo "Usage:"
- echo "1) run it first to setup trace."
- echo "2) run again to parse the trace data if any."
- echo "3) run with \"--cleanup\" option to cleanup trace after use."
-}
-
-if [ "$1" = "--help" ]; then
- show_usage
- exit 0
-fi
-
-if [ "$1" = "--cleanup" ]; then
- cleanup_trace
- exit 0
-fi
-
-if is_trace_ready ; then
- echo "tracekomem - Rough memory consumption by loading kernel modules (larger value with better accuracy)"
- parse_trace_data
-else
- prepare_trace
-fi
-
-exit $?
diff --git a/modules.d/99base/module-setup.sh b/modules.d/99base/module-setup.sh
index c9ead01d..3578643c 100755
--- a/modules.d/99base/module-setup.sh
+++ b/modules.d/99base/module-setup.sh
@@ -35,7 +35,6 @@ install() {
inst_script "$moddir/initqueue.sh" "/sbin/initqueue"
inst_script "$moddir/loginit.sh" "/sbin/loginit"
inst_script "$moddir/rdsosreport.sh" "/sbin/rdsosreport"
- inst_script "$moddir/memtrace-ko.sh" "/sbin/tracekomem"
[ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib
mkdir -m 0755 -p ${initdir}/lib/dracut