diff --git a/.dpdk.metadata b/.dpdk.metadata index 076973b..71047a7 100644 --- a/.dpdk.metadata +++ b/.dpdk.metadata @@ -1 +1 @@ -29e715804c5af6afc44ffeb128716628823c89d2 SOURCES/dpdk-19.11.2.tar.xz +cee6b23d62e0a19f6c6d652f4a415b7d62e95796 SOURCES/dpdk-20.11.tar.xz diff --git a/.gitignore b/.gitignore index 7bbd763..b405c22 100644 --- a/.gitignore +++ b/.gitignore @@ -1 +1 @@ -SOURCES/dpdk-19.11.2.tar.xz +SOURCES/dpdk-20.11.tar.xz diff --git a/SOURCES/arm64-armv8a-linuxapp-gcc-config b/SOURCES/arm64-armv8a-linuxapp-gcc-config deleted file mode 100644 index 93605bd..0000000 --- a/SOURCES/arm64-armv8a-linuxapp-gcc-config +++ /dev/null @@ -1,606 +0,0 @@ -# -*- cfg-sha: fedc4fc78a46e35070ea61c62f51c1cb9283062b4bad46fb91f6c2eb9ec536c5 -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2015 Cavium, Inc -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017 Cavium, Inc -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2016 Intel Corporation -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2017 Intel Corporation -# String that appears before the version number -CONFIG_RTE_VER_PREFIX="DPDK" -# Version information completed when this file is processed for a build -CONFIG_RTE_VER_YEAR=19 -CONFIG_RTE_VER_MONTH=11 -CONFIG_RTE_VER_MINOR=2 -CONFIG_RTE_VER_SUFFIX="" -CONFIG_RTE_VER_RELEASE=99 - # RTE_EXEC_ENV values are the directories in mk/exec-env/ -CONFIG_RTE_EXEC_ENV="linuxapp" -# RTE_ARCH values are architecture we compile for. directories in mk/arch/ -CONFIG_RTE_ARCH="arm64" -# machine can define specific variables or action for a specific board -# RTE_MACHINE values are architecture we compile for. directories in mk/machine/ -CONFIG_RTE_MACHINE="armv8a" -# The compiler we use. -# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/ -CONFIG_RTE_TOOLCHAIN="gcc" -# Use intrinsics or assembly code for key routines -CONFIG_RTE_FORCE_INTRINSICS=y -# Machine forces strict alignment constraints. -CONFIG_RTE_ARCH_STRICT_ALIGN=n -# Enable link time optimization -CONFIG_RTE_ENABLE_LTO=n -# Compile to share library -CONFIG_RTE_BUILD_SHARED_LIB=y -# Use newest code breaking previous ABI -CONFIG_RTE_NEXT_ABI=n -# Machine's cache line size -CONFIG_RTE_CACHE_LINE_SIZE=128 -# Memory model -CONFIG_RTE_USE_C11_MEM_MODEL=y -# Compile Environment Abstraction Layer -CONFIG_RTE_LIBRTE_EAL=y -CONFIG_RTE_MAX_LCORE=256 -CONFIG_RTE_MAX_NUMA_NODES=8 -CONFIG_RTE_MAX_HEAPS=32 -CONFIG_RTE_MAX_MEMSEG_LISTS=64 -# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages -# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller -CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192 -CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768 -# a "type" is a combination of page size and NUMA node. total number of memseg -# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split -# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or -# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of -# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller -CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768 -CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072 -# global maximum usable amount of VA, in megabytes -CONFIG_RTE_MAX_MEM_MB=524288 -CONFIG_RTE_MAX_MEMZONE=2560 -CONFIG_RTE_MAX_TAILQ=32 -CONFIG_RTE_ENABLE_ASSERT=n -CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO -CONFIG_RTE_LOG_HISTORY=256 -CONFIG_RTE_BACKTRACE=y -CONFIG_RTE_LIBEAL_USE_HPET=n -CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n -CONFIG_RTE_EAL_IGB_UIO=n -CONFIG_RTE_EAL_VFIO=y -CONFIG_RTE_MAX_VFIO_GROUPS=64 -CONFIG_RTE_MAX_VFIO_CONTAINERS=64 -CONFIG_RTE_MALLOC_DEBUG=n -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y -CONFIG_RTE_USE_LIBBSD=n -# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing. -# AVX512 is marked as experimental for now, will enable it after enough -# field test and possible optimization. -CONFIG_RTE_ENABLE_AVX=y -CONFIG_RTE_ENABLE_AVX512=n -# Use ARM LSE ATOMIC instructions -CONFIG_RTE_ARM_FEATURE_ATOMICS=n -# Default driver path (or "" to disable) -CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds" -# Compile Environment Abstraction Layer to support Vmware TSC map -CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y -# Compile architecture we compile for. PCI library -CONFIG_RTE_LIBRTE_PCI=y -# Compile architecture we compile for. argument parser library -CONFIG_RTE_LIBRTE_KVARGS=y -# Compile generic ethernet library -CONFIG_RTE_LIBRTE_ETHER=y -CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n -CONFIG_RTE_MAX_ETHPORTS=32 -CONFIG_RTE_MAX_QUEUES_PER_PORT=1024 -CONFIG_RTE_LIBRTE_IEEE1588=n -CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16 -CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y -CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n -# Turn off Tx preparation stage -# Warning: rte_eth_tx_prepare() can be safely disabled only if using a -# driver which do not implement any Tx preparation. -CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n -# Common libraries, before Bus/PMDs -CONFIG_RTE_LIBRTE_COMMON_DPAAX=n -# Compile architecture we compile for. Intel FPGA bus -CONFIG_RTE_LIBRTE_IFPGA_BUS=n -# Compile PCI bus driver -CONFIG_RTE_LIBRTE_PCI_BUS=y -# Compile architecture we compile for. vdev bus -CONFIG_RTE_LIBRTE_VDEV_BUS=y -# Compile ARK PMD -CONFIG_RTE_LIBRTE_ARK_PMD=n -CONFIG_RTE_LIBRTE_ARK_PAD_TX=y -CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n -# Compile Aquantia Atlantic PMD driver -CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n -# Compile AMD PMD -CONFIG_RTE_LIBRTE_AXGBE_PMD=n -CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n -# Compile burst-oriented Broadcom PMD driver -CONFIG_RTE_LIBRTE_BNX2X_PMD=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n -CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n -# Compile burst-oriented Broadcom BNXT PMD driver -CONFIG_RTE_LIBRTE_BNXT_PMD=n -# Compile burst-oriented Chelsio Terminator (CXGBE) PMD -CONFIG_RTE_LIBRTE_CXGBE_PMD=n -# Compile burst-oriented NXP PFE PMD driver -CONFIG_RTE_LIBRTE_PFE_PMD=n -# NXP DPAA Bus -CONFIG_RTE_LIBRTE_DPAA_BUS=n -CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA_PMD=n -CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n -# Compile NXP DPAA2 FSL-MC Bus -CONFIG_RTE_LIBRTE_FSLMC_BUS=n -# Compile Support Libraries for NXP DPAA2 -CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y -# Compile burst-oriented NXP DPAA2 PMD driver -CONFIG_RTE_LIBRTE_DPAA2_PMD=n -CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n -# Compile NXP ENETC PMD Driver -CONFIG_RTE_LIBRTE_ENETC_PMD=n -# Compile burst-oriented Amazon ENA PMD driver -CONFIG_RTE_LIBRTE_ENA_PMD=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n -# Compile burst-oriented Cisco ENIC PMD driver -CONFIG_RTE_LIBRTE_ENIC_PMD=n -# Compile burst-oriented IGB & EM PMD drivers -CONFIG_RTE_LIBRTE_EM_PMD=n -CONFIG_RTE_LIBRTE_IGB_PMD=y -CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n -# Compile burst-oriented HINIC PMD driver -CONFIG_RTE_LIBRTE_HINIC_PMD=n -# Compile burst-oriented HNS3 PMD driver -CONFIG_RTE_LIBRTE_HNS3_PMD=n -# Compile burst-oriented IXGBE PMD driver -CONFIG_RTE_LIBRTE_IXGBE_PMD=y -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n -CONFIG_RTE_IXGBE_INC_VECTOR=y -CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n -# Compile burst-oriented I40E PMD driver -CONFIG_RTE_LIBRTE_I40E_PMD=y -CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n -CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n -CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y -CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y -CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n -CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64 -CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4 -# Compile burst-oriented FM10K PMD -CONFIG_RTE_LIBRTE_FM10K_PMD=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y -CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y -# Compile burst-oriented ICE PMD driver -CONFIG_RTE_LIBRTE_ICE_PMD=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y -CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n -# Compile burst-oriented IAVF PMD driver -CONFIG_RTE_LIBRTE_IAVF_PMD=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n -CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n -# Compile burst-oriented IPN3KE PMD driver -CONFIG_RTE_LIBRTE_IPN3KE_PMD=n -# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD -CONFIG_RTE_LIBRTE_MLX4_PMD=n -CONFIG_RTE_LIBRTE_MLX4_DEBUG=n -# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5, -# ConnectX-6 & BlueField (MLX5) PMD -CONFIG_RTE_LIBRTE_MLX5_PMD=n -CONFIG_RTE_LIBRTE_MLX5_DEBUG=n -# Linking method for mlx4/5 dependency on ibverbs and related libraries -# Default linking is dynamic by linker. -# Other options are: dynamic by dlopen at run-time, or statically embedded. -CONFIG_RTE_IBVERBS_LINK_DLOPEN=n -CONFIG_RTE_IBVERBS_LINK_STATIC=n -# Compile burst-oriented Netronome NFP PMD driver -CONFIG_RTE_LIBRTE_NFP_PMD=n -CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n -CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n -# QLogic 10G/25G/40G/50G/100G PMD -CONFIG_RTE_LIBRTE_QEDE_PMD=n -CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n -#Provides abs path/name of architecture we compile for. firmware file. -#Empty string denotes driver will use default firmware -CONFIG_RTE_LIBRTE_QEDE_FW="" -# Compile burst-oriented Solarflare libefx-based PMD -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n -CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n -# Compile software PMD backed by SZEDATA2 device -CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n -# Compile software PMD backed by NFB device -CONFIG_RTE_LIBRTE_NFB_PMD=n -# Compile burst-oriented Cavium Thunderx NICVF PMD driver -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n -# Compile burst-oriented Cavium LiquidIO PMD driver -CONFIG_RTE_LIBRTE_LIO_PMD=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n -# Compile burst-oriented Cavium OCTEONTX network PMD driver -CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n -# Compile burst-oriented Marvell OCTEON TX2 network PMD driver -CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=n -# Compile WRS accelerated virtual port (AVP) guest PMD driver -CONFIG_RTE_LIBRTE_AVP_PMD=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n -# Compile burst-oriented VIRTIO PMD driver -CONFIG_RTE_LIBRTE_VIRTIO_PMD=y -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n -# Compile virtio device emulation inside virtio PMD driver -CONFIG_RTE_VIRTIO_USER=n -# Compile burst-oriented VMXNET3 PMD driver -CONFIG_RTE_LIBRTE_VMXNET3_PMD=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n -# Compile software PMD backed by AF_PACKET sockets (Linux only) -CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n -# Compile software PMD backed by AF_XDP sockets (Linux only) -CONFIG_RTE_LIBRTE_PMD_AF_XDP=n -# Compile Memory Interface PMD driver (Linux only) -CONFIG_RTE_LIBRTE_PMD_MEMIF=n -# Compile link bonding PMD library -CONFIG_RTE_LIBRTE_PMD_BOND=n -CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n -CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n -# Compile fail-safe PMD -CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y -# Compile Marvell PMD driver -CONFIG_RTE_LIBRTE_MVPP2_PMD=n -# Compile Marvell MVNETA PMD driver -CONFIG_RTE_LIBRTE_MVNETA_PMD=n -# Compile support for VMBus library -CONFIG_RTE_LIBRTE_VMBUS=n -# Compile native PMD for Hyper-V/Azure -CONFIG_RTE_LIBRTE_NETVSC_PMD=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n -# Compile virtual device driver for NetVSC on Hyper-V/Azure -CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n -# Compile null PMD -CONFIG_RTE_LIBRTE_PMD_NULL=n -# Compile software PMD backed by PCAP files -CONFIG_RTE_LIBRTE_PMD_PCAP=n -# Compile example software rings based PMD -CONFIG_RTE_LIBRTE_PMD_RING=y -CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16 -CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16 -# Compile SOFTNIC PMD -CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n -# Compile architecture we compile for. TAP PMD -# It is enabled by default for Linux only. -CONFIG_RTE_LIBRTE_PMD_TAP=y -# Do prefetch of packet data within PMD driver receive function -CONFIG_RTE_PMD_PACKET_PREFETCH=y -# Compile generic wireless base band device library -# EXPERIMENTAL: API may change without prior notice -CONFIG_RTE_LIBRTE_BBDEV=n -CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n -CONFIG_RTE_BBDEV_MAX_DEVS=128 -CONFIG_RTE_BBDEV_OFFLOAD_COST=y -CONFIG_RTE_BBDEV_SDK_AVX2=n -CONFIG_RTE_BBDEV_SDK_AVX512=n -# Compile PMD for NULL bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=n -# Compile PMD for turbo software bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n -# Compile PMD for Intel FPGA LTE FEC bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=n -# Compile generic crypto device library -CONFIG_RTE_LIBRTE_CRYPTODEV=n -CONFIG_RTE_CRYPTO_MAX_DEVS=64 -# Compile PMD for ARMv8 Crypto device -CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n -CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n -# Compile NXP CAAM JR crypto Driver -CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n -CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n -# Compile NXP DPAA2 crypto sec driver for CAAM HW -CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n -# NXP DPAA caam - crypto driver -CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n -CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4 -# Compile PMD for Cavium OCTEON TX crypto device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=n -# Compile PMD for Marvell OCTEON TX2 crypto device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO=n -# Compile PMD for QuickAssist based devices - see docs for details -CONFIG_RTE_LIBRTE_PMD_QAT=n -CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n -CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n -# Max. number of QuickAssist devices, which can be detected and attached -CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48 -CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536 -# Compile PMD for virtio crypto devices -CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n -# Number of maximum virtio crypto devices -CONFIG_RTE_MAX_VIRTIO_CRYPTO=32 -# Compile PMD for AESNI backed device -CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n -# Compile PMD for Software backed device -CONFIG_RTE_LIBRTE_PMD_OPENSSL=n -# Compile PMD for AESNI GCM device -CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n -# Compile PMD for SNOW 3G device -CONFIG_RTE_LIBRTE_PMD_SNOW3G=n -CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n -# Compile PMD for KASUMI device -CONFIG_RTE_LIBRTE_PMD_KASUMI=n -# Compile PMD for ZUC device -CONFIG_RTE_LIBRTE_PMD_ZUC=n -# Compile PMD for Crypto Scheduler device -CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n -# Compile PMD for NULL Crypto device -CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n -# Compile PMD for AMD CCP crypto device -CONFIG_RTE_LIBRTE_PMD_CCP=n -# Compile PMD for Marvell Crypto device -CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n -# Compile PMD for NITROX crypto device -CONFIG_RTE_LIBRTE_PMD_NITROX=n -# Compile generic security library -CONFIG_RTE_LIBRTE_SECURITY=n -# Compile generic compression device library -CONFIG_RTE_LIBRTE_COMPRESSDEV=n -CONFIG_RTE_COMPRESS_MAX_DEVS=64 -# Compile compressdev unit test -CONFIG_RTE_COMPRESSDEV_TEST=n -# Compile PMD for Octeontx ZIPVF compression device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n -# Compile PMD for ISA-L compression device -CONFIG_RTE_LIBRTE_PMD_ISAL=n -# Compile PMD for ZLIB compression device -CONFIG_RTE_LIBRTE_PMD_ZLIB=n -# Compile generic event device library -CONFIG_RTE_LIBRTE_EVENTDEV=n -CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n -CONFIG_RTE_EVENT_MAX_DEVS=16 -CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64 -CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32 -CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024 -CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32 -CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32 -# Compile PMD for skeleton event device -CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n -CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n -# Compile PMD for software event device -CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n -# Compile PMD for distributed software event device -CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n -# Compile PMD for octeontx sso event device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n -# Compile PMD for octeontx2 sso event device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=n -# Compile PMD for OPDL event device -CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n -# Compile PMD for NXP DPAA event device -CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n -# Compile PMD for NXP DPAA2 event device -CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n -# Compile raw device support -# EXPERIMENTAL: API may change without prior notice -CONFIG_RTE_LIBRTE_RAWDEV=n -CONFIG_RTE_RAWDEV_MAX_DEVS=64 -CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n -# Compile PMD for NXP DPAA2 CMDIF raw device -CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n -# Compile PMD for NXP DPAA2 QDMA raw device -CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n -# Compile PMD for Intel FPGA raw device -CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n -# Compile PMD for Intel IOAT raw device -CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n -# Compile PMD for octeontx2 DMA raw device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=n -# Compile PMD for NTB raw device -CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=n -# Compile librte_ring -CONFIG_RTE_LIBRTE_RING=y -# Compile librte_stack -CONFIG_RTE_LIBRTE_STACK=y -# Compile librte_mempool -CONFIG_RTE_LIBRTE_MEMPOOL=y -CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512 -CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n -# Compile Mempool drivers -CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y -CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64 -CONFIG_RTE_DRIVER_MEMPOOL_RING=y -CONFIG_RTE_DRIVER_MEMPOOL_STACK=y -# Compile PMD for octeontx fpa mempool device -CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n -# Compile PMD for octeontx2 npa mempool device -CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=n -# Compile librte_mbuf -CONFIG_RTE_LIBRTE_MBUF=y -CONFIG_RTE_LIBRTE_MBUF_DEBUG=n -CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc" -CONFIG_RTE_MBUF_REFCNT_ATOMIC=y -CONFIG_RTE_PKTMBUF_HEADROOM=128 -# Compile librte_timer -CONFIG_RTE_LIBRTE_TIMER=n -CONFIG_RTE_LIBRTE_TIMER_DEBUG=n -# Compile librte_cfgfile -CONFIG_RTE_LIBRTE_CFGFILE=n -# Compile librte_cmdline -CONFIG_RTE_LIBRTE_CMDLINE=y -CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n -# Compile librte_hash -CONFIG_RTE_LIBRTE_HASH=y -CONFIG_RTE_LIBRTE_HASH_DEBUG=n -# Compile librte_efd -CONFIG_RTE_LIBRTE_EFD=n -# Compile librte_member -CONFIG_RTE_LIBRTE_MEMBER=y -# Compile librte_jobstats -CONFIG_RTE_LIBRTE_JOBSTATS=n -# Compile architecture we compile for. device metrics library -CONFIG_RTE_LIBRTE_METRICS=y -# Compile architecture we compile for. bitrate statistics library -CONFIG_RTE_LIBRTE_BITRATE=y -# Compile architecture we compile for. latency statistics library -CONFIG_RTE_LIBRTE_LATENCY_STATS=y -# Compile librte_telemetry -CONFIG_RTE_LIBRTE_TELEMETRY=n -# Compile librte_rcu -CONFIG_RTE_LIBRTE_RCU=n -CONFIG_RTE_LIBRTE_RCU_DEBUG=n -# Compile librte_rib -CONFIG_RTE_LIBRTE_RIB=n -# Compile librte_fib -CONFIG_RTE_LIBRTE_FIB=n -CONFIG_RTE_LIBRTE_FIB_DEBUG=n -# Compile librte_lpm -CONFIG_RTE_LIBRTE_LPM=n -CONFIG_RTE_LIBRTE_LPM_DEBUG=n -# Compile librte_acl -CONFIG_RTE_LIBRTE_ACL=n -CONFIG_RTE_LIBRTE_ACL_DEBUG=n -# Compile librte_power -CONFIG_RTE_LIBRTE_POWER=n -CONFIG_RTE_LIBRTE_POWER_DEBUG=n -CONFIG_RTE_MAX_LCORE_FREQS=64 -# Compile librte_net -CONFIG_RTE_LIBRTE_NET=y -# Compile librte_ip_frag -CONFIG_RTE_LIBRTE_IP_FRAG=y -CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n -CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4 -CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n -# Compile GRO library -CONFIG_RTE_LIBRTE_GRO=y -# Compile GSO library -CONFIG_RTE_LIBRTE_GSO=y -# Compile librte_meter -CONFIG_RTE_LIBRTE_METER=y -# Compile librte_classify -CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n -# Compile librte_sched -CONFIG_RTE_LIBRTE_SCHED=n -CONFIG_RTE_SCHED_DEBUG=n -CONFIG_RTE_SCHED_RED=n -CONFIG_RTE_SCHED_COLLECT_STATS=n -CONFIG_RTE_SCHED_SUBPORT_TC_OV=n -CONFIG_RTE_SCHED_PORT_N_GRINDERS=8 -CONFIG_RTE_SCHED_VECTOR=n -# Compile architecture we compile for. distributor library -CONFIG_RTE_LIBRTE_DISTRIBUTOR=n -# Compile architecture we compile for. reorder library -CONFIG_RTE_LIBRTE_REORDER=n -# Compile librte_port -CONFIG_RTE_LIBRTE_PORT=n -CONFIG_RTE_PORT_STATS_COLLECT=n -CONFIG_RTE_PORT_PCAP=n -# Compile librte_table -CONFIG_RTE_LIBRTE_TABLE=n -CONFIG_RTE_TABLE_STATS_COLLECT=n -# Compile librte_pipeline -CONFIG_RTE_LIBRTE_PIPELINE=n -CONFIG_RTE_PIPELINE_STATS_COLLECT=n -# Compile librte_kni -CONFIG_RTE_LIBRTE_KNI=n -CONFIG_RTE_LIBRTE_PMD_KNI=n -CONFIG_RTE_KNI_KMOD=n -CONFIG_RTE_KNI_PREEMPT_DEFAULT=y -# Compile architecture we compile for. pdump library -CONFIG_RTE_LIBRTE_PDUMP=y -# Compile vhost user library -CONFIG_RTE_LIBRTE_VHOST=y -CONFIG_RTE_LIBRTE_VHOST_NUMA=y -CONFIG_RTE_LIBRTE_VHOST_DEBUG=n -# Compile vhost PMD -# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled. -CONFIG_RTE_LIBRTE_PMD_VHOST=y -# Compile IFC driver -# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO -# should be enabled. -CONFIG_RTE_LIBRTE_IFC_PMD=n -# Compile librte_bpf -CONFIG_RTE_LIBRTE_BPF=n -# allow load BPF from ELF files (requires libelf) -CONFIG_RTE_LIBRTE_BPF_ELF=n -# Compile librte_ipsec -CONFIG_RTE_LIBRTE_IPSEC=n -# Compile architecture we compile for. test application -CONFIG_RTE_APP_TEST=y -CONFIG_RTE_APP_TEST_RESOURCE_TAR=n -# Compile architecture we compile for. procinfo application -CONFIG_RTE_PROC_INFO=n -# Compile architecture we compile for. PMD test application -CONFIG_RTE_TEST_PMD=y -CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n -CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n -# Compile architecture we compile for. bbdev test application -CONFIG_RTE_TEST_BBDEV=n -# Compile architecture we compile for. compression performance application -CONFIG_RTE_APP_COMPRESS_PERF=n -# Compile architecture we compile for. crypto performance application -CONFIG_RTE_APP_CRYPTO_PERF=n -# Compile architecture we compile for. eventdev application -CONFIG_RTE_APP_EVENTDEV=n -CONFIG_RTE_EXEC_ENV_LINUX=y -CONFIG_RTE_EXEC_ENV_LINUXAPP=y -CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n -# Common libraries, before Bus/PMDs -# NXP DPAA BUS and drivers -# NXP FSLMC BUS and DPAA2 drivers -# NXP ENETC PMD Driver -# HINIC PMD driver -# Hisilicon HNS3 PMD driver -# Compile PMD for Intel FPGA raw device -# To compile, CONFIG_RTE_EAL_VFIO should be enabled. -CONFIG_RTE_ARCH_ARM64=y -CONFIG_RTE_ARCH_64=y -# Maximum available cache line size in arm64 implementations. -# Setting to maximum available cache line size in generic config -# to address minimum DMA alignment across all arm64 implementations. -# Accelarate rte_memcpy. Be sure to run unit test (memcpy_perf_autotest) -# to determine architecture we compile for. best threshold in code. Refer to notes in source file -# (lib/librte_eal/common/include/arch/arm/rte_memcpy_64.h) for more info. -CONFIG_RTE_ARCH_ARM64_MEMCPY=n -#CONFIG_RTE_ARM64_MEMCPY_ALIGNED_THRESHOLD=2048 -#CONFIG_RTE_ARM64_MEMCPY_UNALIGNED_THRESHOLD=512 -# Leave below RTE_ARM64_MEMCPY_xxx options commented out, unless there're -# strong reasons. -#CONFIG_RTE_ARM64_MEMCPY_SKIP_GCC_VER_CHECK=n -#CONFIG_RTE_ARM64_MEMCPY_ALIGN_MASK=0xF -#CONFIG_RTE_ARM64_MEMCPY_STRICT_ALIGN=n -# NXP PFE PMD Driver -CONFIG_RTE_TOOLCHAIN_GCC=y diff --git a/SOURCES/configlib.sh b/SOURCES/configlib.sh deleted file mode 100644 index cf8d70d..0000000 --- a/SOURCES/configlib.sh +++ /dev/null @@ -1,104 +0,0 @@ -# Copyright (C) 2017, Red Hat, Inc. -# -# Core configuration file library. - -# Configurations are determined by sha values. The way to determine is by -# the special text: -# $FILE_COMMENT_TYPE -*- cfg-sha: $SHA256 -*- - -export LC_ALL=C - -# check required binaries -__check_reqd_binaries() { - local BIN __binaries=("egrep" "sort" "sha256sum" "sed") - for BIN in $__binaries; do - if ! type -P $BIN >/dev/null 2>&1; then - echo "Binary $BIN not found. Please install." - exit 1 - fi - done -} - -# Calculates a sha from a file -# The algorithm for generating a sha from a config is thus: -# -# 1. Remove all comment lines and blank lines -# 2. Sort the content -# 3. generate the sha-256 sum -# -# From a script perspective, this means: -# egrep -v ^\# %file% | egrep -v ^$ | sort -u | sha256sum -# -# Params: -# $1 = output variable -# $2 = file to use to calculate the shasum -# $3 = file comment type (defaults to # if unspecified) -calc_sha() { - __check_reqd_binaries - - if [ "$1" == "" ]; then - echo "Please pass in a storage variable." - return 1 - fi - - local __resultvar=$1 - __retval=1 - shift - - local __file=$1 - local cmnt=${2:-#} - - if [ -f "$__file" ]; then - local __shasum=$(egrep -v ^"$cmnt" "$__file" | egrep -v ^$ | sort -u | sha256sum -t | cut -d" " -f1) - eval $__resultvar="'$__shasum'" - __retval=0 - fi - return $__retval -} - -# Retrieves a sha stored in a file -# Param: -# $1 = output variable -# $2 = file to use to calculate the shasum -# $3 = file comment type (defaults to # if unspecified) -retr_sha() { - __check_reqd_binaries - - if [ "$1" == "" ]; then - echo "Please pass in a storage variable." - return 1 - fi - - local __resultvar=$1 - __retval=1 - shift - - local __file=$1 - local cmnt=${2:-#} - - if [ -f "$__file" ]; then - if grep -q "$cmnt -\*- cfg-sha:" "$__file"; then - local __shasum=$(grep "$cmnt -\*- cfg-sha:" "$__file" | sed -e "s@$cmnt -\*- cfg-sha: @@" | cut -d" " -f1) - eval $__resultvar="'$__shasum'" - __retval=0 - fi - fi - return $__retval -} - - -# Set a config value -# set_conf dpdk_build_tree parameter value -# dpdk_build_tree is the directory where the .config lives -# parameter is the config parameter -# value is the value to set for the config parameter -set_conf() { - c="$1/.config" - shift - - if grep -q "$1" "$c"; then - sed -i "s:^$1=.*$:$1=$2:g" $c - else - echo $1=$2 >> "$c" - fi -} diff --git a/SOURCES/gen_config_group.sh b/SOURCES/gen_config_group.sh deleted file mode 100755 index 9ac8790..0000000 --- a/SOURCES/gen_config_group.sh +++ /dev/null @@ -1,237 +0,0 @@ -#!/bin/bash - -source configlib.sh - -# Generates arch configurations in the current directory based on -# 1. an dpdk.spec file -# 2. an expanded dpdk tree - -if (( $# != 2 )); then - echo "$0: dpdk.spec dpdk_tree" >&2 - exit 1 -fi - -DPDKSPEC="$1" -DPDKDIR="$2" - -# accumulate all arch + name triples -DPDK_CONF_MACH_ARCH=() -for arch in $(grep %define\ machine_arch "$DPDKSPEC" | sed 's@%define machine_arch @@') -do - DPDK_CONF_MACH_ARCH+=($arch) -done - -DPDK_CONF_MACH_TMPL=() -for tmpl in $(grep %define\ machine_tmpl "$DPDKSPEC" | sed 's@%define machine_tmpl @@') -do - DPDK_CONF_MACH_TMPL+=($tmpl) -done - -DPDK_CONF_MACH=() -for mach in $(grep %define\ machine\ "$DPDKSPEC" | sed 's@%define machine @@') -do - DPDK_CONF_MACH+=($mach) -done - -DPDK_TARGETS=() -for ((i=0; i < ${#DPDK_CONF_MACH[@]}; i++)); -do - DPDK_TARGETS+=("${DPDK_CONF_MACH_ARCH[$i]}-${DPDK_CONF_MACH_TMPL[$i]}-linuxapp-gcc") - echo "DPDK-target: ${DPDK_TARGETS[$i]}" -done - -OUTPUT_DIR=$(pwd) -pushd "$DPDKDIR" -for ((i=0; i < ${#DPDK_TARGETS[@]}; i++)); -do - echo "For ${DPDK_TARGETS[$i]}:" - - echo " a. Generating initial config" - echo " make V=1 T=${DPDK_TARGETS[$i]} O=${DPDK_TARGETS[$i]}" - make V=1 T=${DPDK_TARGETS[$i]} O=${DPDK_TARGETS[$i]} -j8 config - ORIG_SHA="" - OUTDIR="${DPDK_TARGETS[$i]}" - - echo " b. calculating and applying sha" - calc_sha ORIG_SHA "${OUTDIR}/.config" - if [ "$ORIG_SHA" == "" ]; then - echo "ERROR: Unable to get sha for arch ${DPDK_TARGETS[$i]}" - exit 1 - fi - echo "# -*- cfg-sha: ${ORIG_SHA}" > ${OUTDIR}/.config.new - cat "${OUTDIR}/.config" >> "${OUTDIR}/.config.new" - cp "${OUTDIR}/.config" "${OUTDIR}/.config.orig" - mv -f "${OUTDIR}/.config.new" "${OUTDIR}/.config" - - echo " c. setting initial configurations" - # these are the original setconf values from dpdk.spec - set_conf "${OUTDIR}" CONFIG_RTE_MACHINE "\\\"${DPDK_CONF_MACH[$i]}\\\"" - - # Enable automatic driver loading from this path - set_conf "${OUTDIR}" CONFIG_RTE_EAL_PMD_PATH '"/usr/lib64/dpdk-pmds"' - - # Disable DPDK libraries not needed - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_TIMER n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CFGFILE n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_JOBSTATS n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_LPM n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_ACL n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_POWER n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_SCHED n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DISTRIBUTOR n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_REORDER n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PORT n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_TABLE n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PIPELINE n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_KNI n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CRYPTODEV n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_SECURITY n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_FLOW_CLASSIFY n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BBDEV n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_COMPRESSDEV n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BPF n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DPAA_MEMPOOL n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CFGFILE n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_EFD n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_FLOW_CLASSIFY n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_RCU n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_RIB n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_FIB n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_IPSEC n - - - # Disable all eventdevs - for eventdev in $(grep _EVENTDEV= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g') - do - set_conf "${OUTDIR}" $eventdev n - done - - # Disable all rawdevs - for rawdev in $(grep _RAWDEV= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g') - do - set_conf "${OUTDIR}" $rawdev n - done - - # Disable virtio user - set_conf "${OUTDIR}" CONFIG_RTE_VIRTIO_USER n - - # Enable vhost numa as libnuma dep is ok - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VHOST_NUMA y - - # start by disabling ALL PMDs - for pmd in $(grep _PMD= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g') - do - set_conf "${OUTDIR}" $pmd n - done - - # PMDs which have their own naming scheme - # the default for this was 'n' at one point. Make sure we keep it - # as such - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_QAT n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VHOST n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_KNI n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_NULL n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_PCAP n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_BOND n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_AF_PACKET n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SOFTNIC n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_DPAA_SEC n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_COMMON_DPAAX n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CAAM_JR n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_MEMIF n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO n - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_NITROX n - - # whitelist of enabled PMDs - # Soft PMDs to enable - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_RING y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VHOST y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VIRTIO_PMD y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_TAP y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_FAILSAFE y - - - # start by disabling all buses - for bus in $(grep _BUS= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g') - do - set_conf "${OUTDIR}" $bus n - done - - # blacklist buses that don't conform to std naming - # May override VMBUS later in arch specific section - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VMBUS n - - # whitelist buses - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PCI_BUS y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VDEV_BUS y - - - # Disable some other miscellanous items related to test apps - set_conf "${OUTDIR}" CONFIG_RTE_TEST_BBDEV n - set_conf "${OUTDIR}" CONFIG_RTE_APP_CRYPTO_PERF n - set_conf "${OUTDIR}" CONFIG_RTE_APP_COMPRESS_PERF n - set_conf "${OUTDIR}" CONFIG_RTE_PROC_INFO n - - # Disable kernel modules - set_conf "${OUTDIR}" CONFIG_RTE_EAL_IGB_UIO n - set_conf "${OUTDIR}" CONFIG_RTE_KNI_KMOD n - - # Disable experimental stuff - set_conf "${OUTDIR}" CONFIG_RTE_NEXT_ABI n - - # Build DPDK as shared library - set_conf "${OUTDIR}" CONFIG_RTE_BUILD_SHARED_LIB y - - # Compile the PMD test application - set_conf "${OUTDIR}" CONFIG_RTE_TEST_PMD y - - # Arch specific - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_I40E_PMD y - case "${DPDK_CONF_MACH_ARCH[i]}" in - x86_64) - # Hw PMD - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BNXT_PMD y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_ENIC_PMD y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX4_PMD y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX5_PMD y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_NFP_PMD y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_QEDE_PMD y - # Sw PMD - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_NETVSC_PMD y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD y - # Bus - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VMBUS y - ;& - arm64) - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_IXGBE_PMD y - set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_IGB_PMD y - ;; - esac - - cp "${OUTDIR}/.config" "${OUTPUT_DIR}/${DPDK_TARGETS[$i]}-config" -done -popd >/dev/null - -echo -n "For each arch ( " -for ((i=0; i < ${#DPDK_CONF_MACH_ARCH[@]}; i++)); -do - echo -n "${DPDK_CONF_MACH_ARCH[i]} " -done -echo "):" -echo "1. ensure you enable the requisite hw" diff --git a/SOURCES/ppc_64-power8-linuxapp-gcc-config b/SOURCES/ppc_64-power8-linuxapp-gcc-config deleted file mode 100644 index 6ca431f..0000000 --- a/SOURCES/ppc_64-power8-linuxapp-gcc-config +++ /dev/null @@ -1,592 +0,0 @@ -# -*- cfg-sha: 46dcea384e8aae2041f0f78fedef7f7da8906ed14c1ce3812b7e02ed4f2a3baf -# SPDX-License-Identifier: BSD-3-Clause -# Copyright (C) IBM Corporation 2014. -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2016 Intel Corporation -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2017 Intel Corporation -# String that appears before the version number -CONFIG_RTE_VER_PREFIX="DPDK" -# Version information completed when this file is processed for a build -CONFIG_RTE_VER_YEAR=19 -CONFIG_RTE_VER_MONTH=11 -CONFIG_RTE_VER_MINOR=2 -CONFIG_RTE_VER_SUFFIX="" -CONFIG_RTE_VER_RELEASE=99 - # RTE_EXEC_ENV values are the directories in mk/exec-env/ -CONFIG_RTE_EXEC_ENV="linuxapp" -# RTE_ARCH values are architecture we compile for. directories in mk/arch/ -CONFIG_RTE_ARCH="ppc_64" -# machine can define specific variables or action for a specific board -# RTE_MACHINE values are architecture we compile for. directories in mk/machine/ -CONFIG_RTE_MACHINE="power8" -# The compiler we use. -# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/ -CONFIG_RTE_TOOLCHAIN="gcc" -# Use intrinsics or assembly code for key routines -CONFIG_RTE_FORCE_INTRINSICS=n -# Machine forces strict alignment constraints. -CONFIG_RTE_ARCH_STRICT_ALIGN=n -# Enable link time optimization -CONFIG_RTE_ENABLE_LTO=n -# Compile to share library -CONFIG_RTE_BUILD_SHARED_LIB=y -# Use newest code breaking previous ABI -CONFIG_RTE_NEXT_ABI=n -# Machine's cache line size -CONFIG_RTE_CACHE_LINE_SIZE=128 -# Memory model -CONFIG_RTE_USE_C11_MEM_MODEL=n -# Compile Environment Abstraction Layer -CONFIG_RTE_LIBRTE_EAL=y -CONFIG_RTE_MAX_LCORE=1536 -CONFIG_RTE_MAX_NUMA_NODES=32 -CONFIG_RTE_MAX_HEAPS=32 -CONFIG_RTE_MAX_MEMSEG_LISTS=64 -# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages -# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller -CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192 -CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768 -# a "type" is a combination of page size and NUMA node. total number of memseg -# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split -# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or -# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of -# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller -CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768 -CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072 -# global maximum usable amount of VA, in megabytes -CONFIG_RTE_MAX_MEM_MB=524288 -CONFIG_RTE_MAX_MEMZONE=2560 -CONFIG_RTE_MAX_TAILQ=32 -CONFIG_RTE_ENABLE_ASSERT=n -CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO -CONFIG_RTE_LOG_HISTORY=256 -CONFIG_RTE_BACKTRACE=y -CONFIG_RTE_LIBEAL_USE_HPET=n -CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n -CONFIG_RTE_EAL_IGB_UIO=n -CONFIG_RTE_EAL_VFIO=y -CONFIG_RTE_MAX_VFIO_GROUPS=64 -CONFIG_RTE_MAX_VFIO_CONTAINERS=64 -CONFIG_RTE_MALLOC_DEBUG=n -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y -CONFIG_RTE_USE_LIBBSD=n -# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing. -# AVX512 is marked as experimental for now, will enable it after enough -# field test and possible optimization. -CONFIG_RTE_ENABLE_AVX=y -CONFIG_RTE_ENABLE_AVX512=n -# Use ARM LSE ATOMIC instructions -CONFIG_RTE_ARM_FEATURE_ATOMICS=n -# Default driver path (or "" to disable) -CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds" -# Compile Environment Abstraction Layer to support Vmware TSC map -CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n -# Compile architecture we compile for. PCI library -CONFIG_RTE_LIBRTE_PCI=y -# Compile architecture we compile for. argument parser library -CONFIG_RTE_LIBRTE_KVARGS=y -# Compile generic ethernet library -CONFIG_RTE_LIBRTE_ETHER=y -CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n -CONFIG_RTE_MAX_ETHPORTS=32 -CONFIG_RTE_MAX_QUEUES_PER_PORT=1024 -CONFIG_RTE_LIBRTE_IEEE1588=n -CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16 -CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y -CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n -# Turn off Tx preparation stage -# Warning: rte_eth_tx_prepare() can be safely disabled only if using a -# driver which do not implement any Tx preparation. -CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n -# Common libraries, before Bus/PMDs -CONFIG_RTE_LIBRTE_COMMON_DPAAX=n -# Compile architecture we compile for. Intel FPGA bus -CONFIG_RTE_LIBRTE_IFPGA_BUS=n -# Compile PCI bus driver -CONFIG_RTE_LIBRTE_PCI_BUS=y -# Compile architecture we compile for. vdev bus -CONFIG_RTE_LIBRTE_VDEV_BUS=y -# Compile ARK PMD -CONFIG_RTE_LIBRTE_ARK_PMD=n -CONFIG_RTE_LIBRTE_ARK_PAD_TX=y -CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n -# Compile Aquantia Atlantic PMD driver -CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n -# Compile AMD PMD -CONFIG_RTE_LIBRTE_AXGBE_PMD=n -CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n -# Compile burst-oriented Broadcom PMD driver -CONFIG_RTE_LIBRTE_BNX2X_PMD=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n -CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n -# Compile burst-oriented Broadcom BNXT PMD driver -CONFIG_RTE_LIBRTE_BNXT_PMD=n -# Compile burst-oriented Chelsio Terminator (CXGBE) PMD -CONFIG_RTE_LIBRTE_CXGBE_PMD=n -# Compile burst-oriented NXP PFE PMD driver -CONFIG_RTE_LIBRTE_PFE_PMD=n -# NXP DPAA Bus -CONFIG_RTE_LIBRTE_DPAA_BUS=n -CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA_PMD=n -CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n -# Compile NXP DPAA2 FSL-MC Bus -CONFIG_RTE_LIBRTE_FSLMC_BUS=n -# Compile Support Libraries for NXP DPAA2 -CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y -# Compile burst-oriented NXP DPAA2 PMD driver -CONFIG_RTE_LIBRTE_DPAA2_PMD=n -CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n -# Compile NXP ENETC PMD Driver -CONFIG_RTE_LIBRTE_ENETC_PMD=n -# Compile burst-oriented Amazon ENA PMD driver -CONFIG_RTE_LIBRTE_ENA_PMD=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n -# Compile burst-oriented Cisco ENIC PMD driver -CONFIG_RTE_LIBRTE_ENIC_PMD=n -# Compile burst-oriented IGB & EM PMD drivers -CONFIG_RTE_LIBRTE_EM_PMD=n -CONFIG_RTE_LIBRTE_IGB_PMD=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n -# Compile burst-oriented HINIC PMD driver -CONFIG_RTE_LIBRTE_HINIC_PMD=n -# Compile burst-oriented HNS3 PMD driver -CONFIG_RTE_LIBRTE_HNS3_PMD=n -# Compile burst-oriented IXGBE PMD driver -CONFIG_RTE_LIBRTE_IXGBE_PMD=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n -CONFIG_RTE_IXGBE_INC_VECTOR=y -CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n -# Compile burst-oriented I40E PMD driver -CONFIG_RTE_LIBRTE_I40E_PMD=y -CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n -CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n -CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y -CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y -CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n -CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64 -CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4 -# Compile burst-oriented FM10K PMD -CONFIG_RTE_LIBRTE_FM10K_PMD=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y -CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y -# Compile burst-oriented ICE PMD driver -CONFIG_RTE_LIBRTE_ICE_PMD=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y -CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n -# Compile burst-oriented IAVF PMD driver -CONFIG_RTE_LIBRTE_IAVF_PMD=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n -CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n -# Compile burst-oriented IPN3KE PMD driver -CONFIG_RTE_LIBRTE_IPN3KE_PMD=n -# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD -CONFIG_RTE_LIBRTE_MLX4_PMD=n -CONFIG_RTE_LIBRTE_MLX4_DEBUG=n -# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5, -# ConnectX-6 & BlueField (MLX5) PMD -CONFIG_RTE_LIBRTE_MLX5_PMD=n -CONFIG_RTE_LIBRTE_MLX5_DEBUG=n -# Linking method for mlx4/5 dependency on ibverbs and related libraries -# Default linking is dynamic by linker. -# Other options are: dynamic by dlopen at run-time, or statically embedded. -CONFIG_RTE_IBVERBS_LINK_DLOPEN=n -CONFIG_RTE_IBVERBS_LINK_STATIC=n -# Compile burst-oriented Netronome NFP PMD driver -CONFIG_RTE_LIBRTE_NFP_PMD=n -CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n -CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n -# QLogic 10G/25G/40G/50G/100G PMD -CONFIG_RTE_LIBRTE_QEDE_PMD=n -CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n -#Provides abs path/name of architecture we compile for. firmware file. -#Empty string denotes driver will use default firmware -CONFIG_RTE_LIBRTE_QEDE_FW="" -# Compile burst-oriented Solarflare libefx-based PMD -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n -CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n -# Compile software PMD backed by SZEDATA2 device -CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n -# Compile software PMD backed by NFB device -CONFIG_RTE_LIBRTE_NFB_PMD=n -# Compile burst-oriented Cavium Thunderx NICVF PMD driver -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n -# Compile burst-oriented Cavium LiquidIO PMD driver -CONFIG_RTE_LIBRTE_LIO_PMD=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n -# Compile burst-oriented Cavium OCTEONTX network PMD driver -CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n -# Compile burst-oriented Marvell OCTEON TX2 network PMD driver -CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=n -# Compile WRS accelerated virtual port (AVP) guest PMD driver -CONFIG_RTE_LIBRTE_AVP_PMD=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n -# Compile burst-oriented VIRTIO PMD driver -CONFIG_RTE_LIBRTE_VIRTIO_PMD=y -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n -# Compile virtio device emulation inside virtio PMD driver -CONFIG_RTE_VIRTIO_USER=n -# Compile burst-oriented VMXNET3 PMD driver -CONFIG_RTE_LIBRTE_VMXNET3_PMD=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n -# Compile software PMD backed by AF_PACKET sockets (Linux only) -CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n -# Compile software PMD backed by AF_XDP sockets (Linux only) -CONFIG_RTE_LIBRTE_PMD_AF_XDP=n -# Compile Memory Interface PMD driver (Linux only) -CONFIG_RTE_LIBRTE_PMD_MEMIF=n -# Compile link bonding PMD library -CONFIG_RTE_LIBRTE_PMD_BOND=n -CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n -CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n -# Compile fail-safe PMD -CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y -# Compile Marvell PMD driver -CONFIG_RTE_LIBRTE_MVPP2_PMD=n -# Compile Marvell MVNETA PMD driver -CONFIG_RTE_LIBRTE_MVNETA_PMD=n -# Compile support for VMBus library -CONFIG_RTE_LIBRTE_VMBUS=n -# Compile native PMD for Hyper-V/Azure -CONFIG_RTE_LIBRTE_NETVSC_PMD=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n -# Compile virtual device driver for NetVSC on Hyper-V/Azure -CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n -# Compile null PMD -CONFIG_RTE_LIBRTE_PMD_NULL=n -# Compile software PMD backed by PCAP files -CONFIG_RTE_LIBRTE_PMD_PCAP=n -# Compile example software rings based PMD -CONFIG_RTE_LIBRTE_PMD_RING=y -CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16 -CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16 -# Compile SOFTNIC PMD -CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n -# Compile architecture we compile for. TAP PMD -# It is enabled by default for Linux only. -CONFIG_RTE_LIBRTE_PMD_TAP=y -# Do prefetch of packet data within PMD driver receive function -CONFIG_RTE_PMD_PACKET_PREFETCH=y -# Compile generic wireless base band device library -# EXPERIMENTAL: API may change without prior notice -CONFIG_RTE_LIBRTE_BBDEV=n -CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n -CONFIG_RTE_BBDEV_MAX_DEVS=128 -CONFIG_RTE_BBDEV_OFFLOAD_COST=y -CONFIG_RTE_BBDEV_SDK_AVX2=n -CONFIG_RTE_BBDEV_SDK_AVX512=n -# Compile PMD for NULL bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=n -# Compile PMD for turbo software bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n -# Compile PMD for Intel FPGA LTE FEC bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=n -# Compile generic crypto device library -CONFIG_RTE_LIBRTE_CRYPTODEV=n -CONFIG_RTE_CRYPTO_MAX_DEVS=64 -# Compile PMD for ARMv8 Crypto device -CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n -CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n -# Compile NXP CAAM JR crypto Driver -CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n -CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n -# Compile NXP DPAA2 crypto sec driver for CAAM HW -CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n -# NXP DPAA caam - crypto driver -CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n -CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4 -# Compile PMD for Cavium OCTEON TX crypto device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=n -# Compile PMD for Marvell OCTEON TX2 crypto device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO=n -# Compile PMD for QuickAssist based devices - see docs for details -CONFIG_RTE_LIBRTE_PMD_QAT=n -CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n -CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n -# Max. number of QuickAssist devices, which can be detected and attached -CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48 -CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536 -# Compile PMD for virtio crypto devices -CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n -# Number of maximum virtio crypto devices -CONFIG_RTE_MAX_VIRTIO_CRYPTO=32 -# Compile PMD for AESNI backed device -CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n -# Compile PMD for Software backed device -CONFIG_RTE_LIBRTE_PMD_OPENSSL=n -# Compile PMD for AESNI GCM device -CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n -# Compile PMD for SNOW 3G device -CONFIG_RTE_LIBRTE_PMD_SNOW3G=n -CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n -# Compile PMD for KASUMI device -CONFIG_RTE_LIBRTE_PMD_KASUMI=n -# Compile PMD for ZUC device -CONFIG_RTE_LIBRTE_PMD_ZUC=n -# Compile PMD for Crypto Scheduler device -CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n -# Compile PMD for NULL Crypto device -CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n -# Compile PMD for AMD CCP crypto device -CONFIG_RTE_LIBRTE_PMD_CCP=n -# Compile PMD for Marvell Crypto device -CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n -# Compile PMD for NITROX crypto device -CONFIG_RTE_LIBRTE_PMD_NITROX=n -# Compile generic security library -CONFIG_RTE_LIBRTE_SECURITY=n -# Compile generic compression device library -CONFIG_RTE_LIBRTE_COMPRESSDEV=n -CONFIG_RTE_COMPRESS_MAX_DEVS=64 -# Compile compressdev unit test -CONFIG_RTE_COMPRESSDEV_TEST=n -# Compile PMD for Octeontx ZIPVF compression device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n -# Compile PMD for ISA-L compression device -CONFIG_RTE_LIBRTE_PMD_ISAL=n -# Compile PMD for ZLIB compression device -CONFIG_RTE_LIBRTE_PMD_ZLIB=n -# Compile generic event device library -CONFIG_RTE_LIBRTE_EVENTDEV=n -CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n -CONFIG_RTE_EVENT_MAX_DEVS=16 -CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64 -CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32 -CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024 -CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32 -CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32 -# Compile PMD for skeleton event device -CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n -CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n -# Compile PMD for software event device -CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n -# Compile PMD for distributed software event device -CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n -# Compile PMD for octeontx sso event device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n -# Compile PMD for octeontx2 sso event device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=n -# Compile PMD for OPDL event device -CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n -# Compile PMD for NXP DPAA event device -CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n -# Compile PMD for NXP DPAA2 event device -CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n -# Compile raw device support -# EXPERIMENTAL: API may change without prior notice -CONFIG_RTE_LIBRTE_RAWDEV=n -CONFIG_RTE_RAWDEV_MAX_DEVS=64 -CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n -# Compile PMD for NXP DPAA2 CMDIF raw device -CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n -# Compile PMD for NXP DPAA2 QDMA raw device -CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n -# Compile PMD for Intel FPGA raw device -CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n -# Compile PMD for Intel IOAT raw device -CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n -# Compile PMD for octeontx2 DMA raw device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=n -# Compile PMD for NTB raw device -CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=n -# Compile librte_ring -CONFIG_RTE_LIBRTE_RING=y -# Compile librte_stack -CONFIG_RTE_LIBRTE_STACK=y -# Compile librte_mempool -CONFIG_RTE_LIBRTE_MEMPOOL=y -CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512 -CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n -# Compile Mempool drivers -CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y -CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64 -CONFIG_RTE_DRIVER_MEMPOOL_RING=y -CONFIG_RTE_DRIVER_MEMPOOL_STACK=y -# Compile PMD for octeontx fpa mempool device -CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n -# Compile PMD for octeontx2 npa mempool device -CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=n -# Compile librte_mbuf -CONFIG_RTE_LIBRTE_MBUF=y -CONFIG_RTE_LIBRTE_MBUF_DEBUG=n -CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc" -CONFIG_RTE_MBUF_REFCNT_ATOMIC=y -CONFIG_RTE_PKTMBUF_HEADROOM=128 -# Compile librte_timer -CONFIG_RTE_LIBRTE_TIMER=n -CONFIG_RTE_LIBRTE_TIMER_DEBUG=n -# Compile librte_cfgfile -CONFIG_RTE_LIBRTE_CFGFILE=n -# Compile librte_cmdline -CONFIG_RTE_LIBRTE_CMDLINE=y -CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n -# Compile librte_hash -CONFIG_RTE_LIBRTE_HASH=y -CONFIG_RTE_LIBRTE_HASH_DEBUG=n -# Compile librte_efd -CONFIG_RTE_LIBRTE_EFD=n -# Compile librte_member -CONFIG_RTE_LIBRTE_MEMBER=y -# Compile librte_jobstats -CONFIG_RTE_LIBRTE_JOBSTATS=n -# Compile architecture we compile for. device metrics library -CONFIG_RTE_LIBRTE_METRICS=y -# Compile architecture we compile for. bitrate statistics library -CONFIG_RTE_LIBRTE_BITRATE=y -# Compile architecture we compile for. latency statistics library -CONFIG_RTE_LIBRTE_LATENCY_STATS=y -# Compile librte_telemetry -CONFIG_RTE_LIBRTE_TELEMETRY=n -# Compile librte_rcu -CONFIG_RTE_LIBRTE_RCU=n -CONFIG_RTE_LIBRTE_RCU_DEBUG=n -# Compile librte_rib -CONFIG_RTE_LIBRTE_RIB=n -# Compile librte_fib -CONFIG_RTE_LIBRTE_FIB=n -CONFIG_RTE_LIBRTE_FIB_DEBUG=n -# Compile librte_lpm -CONFIG_RTE_LIBRTE_LPM=n -CONFIG_RTE_LIBRTE_LPM_DEBUG=n -# Compile librte_acl -CONFIG_RTE_LIBRTE_ACL=n -CONFIG_RTE_LIBRTE_ACL_DEBUG=n -# Compile librte_power -CONFIG_RTE_LIBRTE_POWER=n -CONFIG_RTE_LIBRTE_POWER_DEBUG=n -CONFIG_RTE_MAX_LCORE_FREQS=64 -# Compile librte_net -CONFIG_RTE_LIBRTE_NET=y -# Compile librte_ip_frag -CONFIG_RTE_LIBRTE_IP_FRAG=y -CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n -CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4 -CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n -# Compile GRO library -CONFIG_RTE_LIBRTE_GRO=y -# Compile GSO library -CONFIG_RTE_LIBRTE_GSO=y -# Compile librte_meter -CONFIG_RTE_LIBRTE_METER=y -# Compile librte_classify -CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n -# Compile librte_sched -CONFIG_RTE_LIBRTE_SCHED=n -CONFIG_RTE_SCHED_DEBUG=n -CONFIG_RTE_SCHED_RED=n -CONFIG_RTE_SCHED_COLLECT_STATS=n -CONFIG_RTE_SCHED_SUBPORT_TC_OV=n -CONFIG_RTE_SCHED_PORT_N_GRINDERS=8 -CONFIG_RTE_SCHED_VECTOR=n -# Compile architecture we compile for. distributor library -CONFIG_RTE_LIBRTE_DISTRIBUTOR=n -# Compile architecture we compile for. reorder library -CONFIG_RTE_LIBRTE_REORDER=n -# Compile librte_port -CONFIG_RTE_LIBRTE_PORT=n -CONFIG_RTE_PORT_STATS_COLLECT=n -CONFIG_RTE_PORT_PCAP=n -# Compile librte_table -CONFIG_RTE_LIBRTE_TABLE=n -CONFIG_RTE_TABLE_STATS_COLLECT=n -# Compile librte_pipeline -CONFIG_RTE_LIBRTE_PIPELINE=n -CONFIG_RTE_PIPELINE_STATS_COLLECT=n -# Compile librte_kni -CONFIG_RTE_LIBRTE_KNI=n -CONFIG_RTE_LIBRTE_PMD_KNI=n -CONFIG_RTE_KNI_KMOD=n -CONFIG_RTE_KNI_PREEMPT_DEFAULT=y -# Compile architecture we compile for. pdump library -CONFIG_RTE_LIBRTE_PDUMP=y -# Compile vhost user library -CONFIG_RTE_LIBRTE_VHOST=y -CONFIG_RTE_LIBRTE_VHOST_NUMA=y -CONFIG_RTE_LIBRTE_VHOST_DEBUG=n -# Compile vhost PMD -# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled. -CONFIG_RTE_LIBRTE_PMD_VHOST=y -# Compile IFC driver -# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO -# should be enabled. -CONFIG_RTE_LIBRTE_IFC_PMD=n -# Compile librte_bpf -CONFIG_RTE_LIBRTE_BPF=n -# allow load BPF from ELF files (requires libelf) -CONFIG_RTE_LIBRTE_BPF_ELF=n -# Compile librte_ipsec -CONFIG_RTE_LIBRTE_IPSEC=n -# Compile architecture we compile for. test application -CONFIG_RTE_APP_TEST=y -CONFIG_RTE_APP_TEST_RESOURCE_TAR=n -# Compile architecture we compile for. procinfo application -CONFIG_RTE_PROC_INFO=n -# Compile architecture we compile for. PMD test application -CONFIG_RTE_TEST_PMD=y -CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n -CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n -# Compile architecture we compile for. bbdev test application -CONFIG_RTE_TEST_BBDEV=n -# Compile architecture we compile for. compression performance application -CONFIG_RTE_APP_COMPRESS_PERF=n -# Compile architecture we compile for. crypto performance application -CONFIG_RTE_APP_CRYPTO_PERF=n -# Compile architecture we compile for. eventdev application -CONFIG_RTE_APP_EVENTDEV=n -CONFIG_RTE_EXEC_ENV_LINUX=y -CONFIG_RTE_EXEC_ENV_LINUXAPP=y -CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n -# Common libraries, before Bus/PMDs -# NXP DPAA BUS and drivers -# NXP FSLMC BUS and DPAA2 drivers -# NXP ENETC PMD Driver -# HINIC PMD driver -# Hisilicon HNS3 PMD driver -# Compile PMD for Intel FPGA raw device -# To compile, CONFIG_RTE_EAL_VFIO should be enabled. -CONFIG_RTE_ARCH_PPC_64=y -CONFIG_RTE_ARCH_64=y -CONFIG_RTE_TOOLCHAIN_GCC=y -# Note: Power doesn't have this support -# Note: Initially, all of architecture we compile for. PMD drivers compilation are turned off on Power -# Will turn on them only after architecture we compile for. successful testing on Power diff --git a/SOURCES/set_config.sh b/SOURCES/set_config.sh deleted file mode 100755 index 002386b..0000000 --- a/SOURCES/set_config.sh +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/bash -# Copyright (C) 2017, Red Hat, Inc. -# -# set_config.sh will copy a configuration from $1 to $2, in the process -# checking that the sha header for $1 matches the header in $2 - -source configlib.sh - -if (( $# < 2 )); then - echo "$0: source dest [comment-marker]" - exit 1 -fi - -if [ ! -f "$1" ]; then - echo "Source file $1 must exist." - exit 1 -fi -src_file=$1 -shift - -if [ ! -f "$1" ]; then - echo "Dest file $1 must exist." - exit 1 -fi -dst_file=$1 -shift - -comment_sep=${1:-#} - -export LANG=en_US.utf8 - -DEST_FILE_SHA="" -SRC_FILE_SHA="" - -calc_sha DEST_FILE_SHA "$dst_file" "$comment_sep" || echo "Failed to calc sha" -retr_sha SRC_FILE_SHA "$src_file" "$comment_sep" || echo "Failed to retrieve sha" - -if [ "$DEST_FILE_SHA" != "$SRC_FILE_SHA" ]; then - echo "ERROR: The requisite starting sha from $dst_file does not match the" - echo " specified sha in $src_file." - echo "[ $DEST_FILE_SHA ] vs [ $SRC_FILE_SHA ]" - exit 1 -fi - -mv "$dst_file" "$dst_file".OLD -cp "$src_file" "$dst_file" -echo "copied 1 config file." -exit 0 diff --git a/SOURCES/x86_64-native-linuxapp-gcc-config b/SOURCES/x86_64-native-linuxapp-gcc-config deleted file mode 100644 index 195bd7f..0000000 --- a/SOURCES/x86_64-native-linuxapp-gcc-config +++ /dev/null @@ -1,590 +0,0 @@ -# -*- cfg-sha: fa840957ea3dbcff81dd55098161c11d90c3cad399b89e6089f793e7362a5c48 -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2016 Intel Corporation -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2017 Intel Corporation -# String that appears before the version number -CONFIG_RTE_VER_PREFIX="DPDK" -# Version information completed when this file is processed for a build -CONFIG_RTE_VER_YEAR=19 -CONFIG_RTE_VER_MONTH=11 -CONFIG_RTE_VER_MINOR=2 -CONFIG_RTE_VER_SUFFIX="" -CONFIG_RTE_VER_RELEASE=99 - # RTE_EXEC_ENV values are the directories in mk/exec-env/ -CONFIG_RTE_EXEC_ENV="linuxapp" -# RTE_ARCH values are architecture we compile for. directories in mk/arch/ -CONFIG_RTE_ARCH="x86_64" -# machine can define specific variables or action for a specific board -# RTE_MACHINE values are architecture we compile for. directories in mk/machine/ -CONFIG_RTE_MACHINE="default" -# The compiler we use. -# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/ -CONFIG_RTE_TOOLCHAIN="gcc" -# Use intrinsics or assembly code for key routines -CONFIG_RTE_FORCE_INTRINSICS=n -# Machine forces strict alignment constraints. -CONFIG_RTE_ARCH_STRICT_ALIGN=n -# Enable link time optimization -CONFIG_RTE_ENABLE_LTO=n -# Compile to share library -CONFIG_RTE_BUILD_SHARED_LIB=y -# Use newest code breaking previous ABI -CONFIG_RTE_NEXT_ABI=n -# Machine's cache line size -CONFIG_RTE_CACHE_LINE_SIZE=64 -# Memory model -CONFIG_RTE_USE_C11_MEM_MODEL=n -# Compile Environment Abstraction Layer -CONFIG_RTE_LIBRTE_EAL=y -CONFIG_RTE_MAX_LCORE=128 -CONFIG_RTE_MAX_NUMA_NODES=8 -CONFIG_RTE_MAX_HEAPS=32 -CONFIG_RTE_MAX_MEMSEG_LISTS=64 -# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages -# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller -CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192 -CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768 -# a "type" is a combination of page size and NUMA node. total number of memseg -# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split -# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or -# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of -# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller -CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768 -CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072 -# global maximum usable amount of VA, in megabytes -CONFIG_RTE_MAX_MEM_MB=524288 -CONFIG_RTE_MAX_MEMZONE=2560 -CONFIG_RTE_MAX_TAILQ=32 -CONFIG_RTE_ENABLE_ASSERT=n -CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO -CONFIG_RTE_LOG_HISTORY=256 -CONFIG_RTE_BACKTRACE=y -CONFIG_RTE_LIBEAL_USE_HPET=n -CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n -CONFIG_RTE_EAL_IGB_UIO=n -CONFIG_RTE_EAL_VFIO=y -CONFIG_RTE_MAX_VFIO_GROUPS=64 -CONFIG_RTE_MAX_VFIO_CONTAINERS=64 -CONFIG_RTE_MALLOC_DEBUG=n -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y -CONFIG_RTE_USE_LIBBSD=n -# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing. -# AVX512 is marked as experimental for now, will enable it after enough -# field test and possible optimization. -CONFIG_RTE_ENABLE_AVX=y -CONFIG_RTE_ENABLE_AVX512=n -# Use ARM LSE ATOMIC instructions -CONFIG_RTE_ARM_FEATURE_ATOMICS=n -# Default driver path (or "" to disable) -CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds" -# Compile Environment Abstraction Layer to support Vmware TSC map -CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y -# Compile architecture we compile for. PCI library -CONFIG_RTE_LIBRTE_PCI=y -# Compile architecture we compile for. argument parser library -CONFIG_RTE_LIBRTE_KVARGS=y -# Compile generic ethernet library -CONFIG_RTE_LIBRTE_ETHER=y -CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n -CONFIG_RTE_MAX_ETHPORTS=32 -CONFIG_RTE_MAX_QUEUES_PER_PORT=1024 -CONFIG_RTE_LIBRTE_IEEE1588=n -CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16 -CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y -CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n -# Turn off Tx preparation stage -# Warning: rte_eth_tx_prepare() can be safely disabled only if using a -# driver which do not implement any Tx preparation. -CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n -# Common libraries, before Bus/PMDs -CONFIG_RTE_LIBRTE_COMMON_DPAAX=n -# Compile architecture we compile for. Intel FPGA bus -CONFIG_RTE_LIBRTE_IFPGA_BUS=n -# Compile PCI bus driver -CONFIG_RTE_LIBRTE_PCI_BUS=y -# Compile architecture we compile for. vdev bus -CONFIG_RTE_LIBRTE_VDEV_BUS=y -# Compile ARK PMD -CONFIG_RTE_LIBRTE_ARK_PMD=n -CONFIG_RTE_LIBRTE_ARK_PAD_TX=y -CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n -# Compile Aquantia Atlantic PMD driver -CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n -# Compile AMD PMD -CONFIG_RTE_LIBRTE_AXGBE_PMD=n -CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n -# Compile burst-oriented Broadcom PMD driver -CONFIG_RTE_LIBRTE_BNX2X_PMD=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n -CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n -# Compile burst-oriented Broadcom BNXT PMD driver -CONFIG_RTE_LIBRTE_BNXT_PMD=y -# Compile burst-oriented Chelsio Terminator (CXGBE) PMD -CONFIG_RTE_LIBRTE_CXGBE_PMD=n -# Compile burst-oriented NXP PFE PMD driver -CONFIG_RTE_LIBRTE_PFE_PMD=n -# NXP DPAA Bus -CONFIG_RTE_LIBRTE_DPAA_BUS=n -CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA_PMD=n -CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n -# Compile NXP DPAA2 FSL-MC Bus -CONFIG_RTE_LIBRTE_FSLMC_BUS=n -# Compile Support Libraries for NXP DPAA2 -CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y -# Compile burst-oriented NXP DPAA2 PMD driver -CONFIG_RTE_LIBRTE_DPAA2_PMD=n -CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n -# Compile NXP ENETC PMD Driver -CONFIG_RTE_LIBRTE_ENETC_PMD=n -# Compile burst-oriented Amazon ENA PMD driver -CONFIG_RTE_LIBRTE_ENA_PMD=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n -# Compile burst-oriented Cisco ENIC PMD driver -CONFIG_RTE_LIBRTE_ENIC_PMD=y -# Compile burst-oriented IGB & EM PMD drivers -CONFIG_RTE_LIBRTE_EM_PMD=n -CONFIG_RTE_LIBRTE_IGB_PMD=y -CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n -# Compile burst-oriented HINIC PMD driver -CONFIG_RTE_LIBRTE_HINIC_PMD=n -# Compile burst-oriented HNS3 PMD driver -CONFIG_RTE_LIBRTE_HNS3_PMD=n -# Compile burst-oriented IXGBE PMD driver -CONFIG_RTE_LIBRTE_IXGBE_PMD=y -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n -CONFIG_RTE_IXGBE_INC_VECTOR=y -CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n -# Compile burst-oriented I40E PMD driver -CONFIG_RTE_LIBRTE_I40E_PMD=y -CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n -CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n -CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y -CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y -CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n -CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64 -CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4 -# Compile burst-oriented FM10K PMD -CONFIG_RTE_LIBRTE_FM10K_PMD=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y -CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y -# Compile burst-oriented ICE PMD driver -CONFIG_RTE_LIBRTE_ICE_PMD=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y -CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n -# Compile burst-oriented IAVF PMD driver -CONFIG_RTE_LIBRTE_IAVF_PMD=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n -CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n -# Compile burst-oriented IPN3KE PMD driver -CONFIG_RTE_LIBRTE_IPN3KE_PMD=n -# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD -CONFIG_RTE_LIBRTE_MLX4_PMD=y -CONFIG_RTE_LIBRTE_MLX4_DEBUG=n -# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5, -# ConnectX-6 & BlueField (MLX5) PMD -CONFIG_RTE_LIBRTE_MLX5_PMD=y -CONFIG_RTE_LIBRTE_MLX5_DEBUG=n -# Linking method for mlx4/5 dependency on ibverbs and related libraries -# Default linking is dynamic by linker. -# Other options are: dynamic by dlopen at run-time, or statically embedded. -CONFIG_RTE_IBVERBS_LINK_DLOPEN=n -CONFIG_RTE_IBVERBS_LINK_STATIC=n -# Compile burst-oriented Netronome NFP PMD driver -CONFIG_RTE_LIBRTE_NFP_PMD=y -CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n -CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n -# QLogic 10G/25G/40G/50G/100G PMD -CONFIG_RTE_LIBRTE_QEDE_PMD=y -CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n -#Provides abs path/name of architecture we compile for. firmware file. -#Empty string denotes driver will use default firmware -CONFIG_RTE_LIBRTE_QEDE_FW="" -# Compile burst-oriented Solarflare libefx-based PMD -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n -CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n -# Compile software PMD backed by SZEDATA2 device -CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n -# Compile software PMD backed by NFB device -CONFIG_RTE_LIBRTE_NFB_PMD=n -# Compile burst-oriented Cavium Thunderx NICVF PMD driver -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n -# Compile burst-oriented Cavium LiquidIO PMD driver -CONFIG_RTE_LIBRTE_LIO_PMD=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n -# Compile burst-oriented Cavium OCTEONTX network PMD driver -CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n -# Compile burst-oriented Marvell OCTEON TX2 network PMD driver -CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=n -# Compile WRS accelerated virtual port (AVP) guest PMD driver -CONFIG_RTE_LIBRTE_AVP_PMD=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n -# Compile burst-oriented VIRTIO PMD driver -CONFIG_RTE_LIBRTE_VIRTIO_PMD=y -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n -# Compile virtio device emulation inside virtio PMD driver -CONFIG_RTE_VIRTIO_USER=n -# Compile burst-oriented VMXNET3 PMD driver -CONFIG_RTE_LIBRTE_VMXNET3_PMD=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n -# Compile software PMD backed by AF_PACKET sockets (Linux only) -CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n -# Compile software PMD backed by AF_XDP sockets (Linux only) -CONFIG_RTE_LIBRTE_PMD_AF_XDP=n -# Compile Memory Interface PMD driver (Linux only) -CONFIG_RTE_LIBRTE_PMD_MEMIF=n -# Compile link bonding PMD library -CONFIG_RTE_LIBRTE_PMD_BOND=n -CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n -CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n -# Compile fail-safe PMD -CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y -# Compile Marvell PMD driver -CONFIG_RTE_LIBRTE_MVPP2_PMD=n -# Compile Marvell MVNETA PMD driver -CONFIG_RTE_LIBRTE_MVNETA_PMD=n -# Compile support for VMBus library -CONFIG_RTE_LIBRTE_VMBUS=y -# Compile native PMD for Hyper-V/Azure -CONFIG_RTE_LIBRTE_NETVSC_PMD=y -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n -# Compile virtual device driver for NetVSC on Hyper-V/Azure -CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=y -# Compile null PMD -CONFIG_RTE_LIBRTE_PMD_NULL=n -# Compile software PMD backed by PCAP files -CONFIG_RTE_LIBRTE_PMD_PCAP=n -# Compile example software rings based PMD -CONFIG_RTE_LIBRTE_PMD_RING=y -CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16 -CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16 -# Compile SOFTNIC PMD -CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n -# Compile architecture we compile for. TAP PMD -# It is enabled by default for Linux only. -CONFIG_RTE_LIBRTE_PMD_TAP=y -# Do prefetch of packet data within PMD driver receive function -CONFIG_RTE_PMD_PACKET_PREFETCH=y -# Compile generic wireless base band device library -# EXPERIMENTAL: API may change without prior notice -CONFIG_RTE_LIBRTE_BBDEV=n -CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n -CONFIG_RTE_BBDEV_MAX_DEVS=128 -CONFIG_RTE_BBDEV_OFFLOAD_COST=y -CONFIG_RTE_BBDEV_SDK_AVX2=n -CONFIG_RTE_BBDEV_SDK_AVX512=n -# Compile PMD for NULL bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=n -# Compile PMD for turbo software bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n -# Compile PMD for Intel FPGA LTE FEC bbdev device -CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=n -# Compile generic crypto device library -CONFIG_RTE_LIBRTE_CRYPTODEV=n -CONFIG_RTE_CRYPTO_MAX_DEVS=64 -# Compile PMD for ARMv8 Crypto device -CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n -CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n -# Compile NXP CAAM JR crypto Driver -CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n -CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n -# Compile NXP DPAA2 crypto sec driver for CAAM HW -CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n -# NXP DPAA caam - crypto driver -CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n -CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4 -# Compile PMD for Cavium OCTEON TX crypto device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=n -# Compile PMD for Marvell OCTEON TX2 crypto device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO=n -# Compile PMD for QuickAssist based devices - see docs for details -CONFIG_RTE_LIBRTE_PMD_QAT=n -CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n -CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n -# Max. number of QuickAssist devices, which can be detected and attached -CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48 -CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536 -# Compile PMD for virtio crypto devices -CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n -# Number of maximum virtio crypto devices -CONFIG_RTE_MAX_VIRTIO_CRYPTO=32 -# Compile PMD for AESNI backed device -CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n -# Compile PMD for Software backed device -CONFIG_RTE_LIBRTE_PMD_OPENSSL=n -# Compile PMD for AESNI GCM device -CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n -# Compile PMD for SNOW 3G device -CONFIG_RTE_LIBRTE_PMD_SNOW3G=n -CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n -# Compile PMD for KASUMI device -CONFIG_RTE_LIBRTE_PMD_KASUMI=n -# Compile PMD for ZUC device -CONFIG_RTE_LIBRTE_PMD_ZUC=n -# Compile PMD for Crypto Scheduler device -CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n -# Compile PMD for NULL Crypto device -CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n -# Compile PMD for AMD CCP crypto device -CONFIG_RTE_LIBRTE_PMD_CCP=n -# Compile PMD for Marvell Crypto device -CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n -# Compile PMD for NITROX crypto device -CONFIG_RTE_LIBRTE_PMD_NITROX=n -# Compile generic security library -CONFIG_RTE_LIBRTE_SECURITY=n -# Compile generic compression device library -CONFIG_RTE_LIBRTE_COMPRESSDEV=n -CONFIG_RTE_COMPRESS_MAX_DEVS=64 -# Compile compressdev unit test -CONFIG_RTE_COMPRESSDEV_TEST=n -# Compile PMD for Octeontx ZIPVF compression device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n -# Compile PMD for ISA-L compression device -CONFIG_RTE_LIBRTE_PMD_ISAL=n -# Compile PMD for ZLIB compression device -CONFIG_RTE_LIBRTE_PMD_ZLIB=n -# Compile generic event device library -CONFIG_RTE_LIBRTE_EVENTDEV=n -CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n -CONFIG_RTE_EVENT_MAX_DEVS=16 -CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64 -CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32 -CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024 -CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32 -CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32 -# Compile PMD for skeleton event device -CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n -CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n -# Compile PMD for software event device -CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n -# Compile PMD for distributed software event device -CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n -# Compile PMD for octeontx sso event device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n -# Compile PMD for octeontx2 sso event device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=n -# Compile PMD for OPDL event device -CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n -# Compile PMD for NXP DPAA event device -CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n -# Compile PMD for NXP DPAA2 event device -CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n -# Compile raw device support -# EXPERIMENTAL: API may change without prior notice -CONFIG_RTE_LIBRTE_RAWDEV=n -CONFIG_RTE_RAWDEV_MAX_DEVS=64 -CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n -# Compile PMD for NXP DPAA2 CMDIF raw device -CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n -# Compile PMD for NXP DPAA2 QDMA raw device -CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n -# Compile PMD for Intel FPGA raw device -CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n -# Compile PMD for Intel IOAT raw device -CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n -# Compile PMD for octeontx2 DMA raw device -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=n -# Compile PMD for NTB raw device -CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=n -# Compile librte_ring -CONFIG_RTE_LIBRTE_RING=y -# Compile librte_stack -CONFIG_RTE_LIBRTE_STACK=y -# Compile librte_mempool -CONFIG_RTE_LIBRTE_MEMPOOL=y -CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512 -CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n -# Compile Mempool drivers -CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y -CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64 -CONFIG_RTE_DRIVER_MEMPOOL_RING=y -CONFIG_RTE_DRIVER_MEMPOOL_STACK=y -# Compile PMD for octeontx fpa mempool device -CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n -# Compile PMD for octeontx2 npa mempool device -CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=n -# Compile librte_mbuf -CONFIG_RTE_LIBRTE_MBUF=y -CONFIG_RTE_LIBRTE_MBUF_DEBUG=n -CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc" -CONFIG_RTE_MBUF_REFCNT_ATOMIC=y -CONFIG_RTE_PKTMBUF_HEADROOM=128 -# Compile librte_timer -CONFIG_RTE_LIBRTE_TIMER=n -CONFIG_RTE_LIBRTE_TIMER_DEBUG=n -# Compile librte_cfgfile -CONFIG_RTE_LIBRTE_CFGFILE=n -# Compile librte_cmdline -CONFIG_RTE_LIBRTE_CMDLINE=y -CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n -# Compile librte_hash -CONFIG_RTE_LIBRTE_HASH=y -CONFIG_RTE_LIBRTE_HASH_DEBUG=n -# Compile librte_efd -CONFIG_RTE_LIBRTE_EFD=n -# Compile librte_member -CONFIG_RTE_LIBRTE_MEMBER=y -# Compile librte_jobstats -CONFIG_RTE_LIBRTE_JOBSTATS=n -# Compile architecture we compile for. device metrics library -CONFIG_RTE_LIBRTE_METRICS=y -# Compile architecture we compile for. bitrate statistics library -CONFIG_RTE_LIBRTE_BITRATE=y -# Compile architecture we compile for. latency statistics library -CONFIG_RTE_LIBRTE_LATENCY_STATS=y -# Compile librte_telemetry -CONFIG_RTE_LIBRTE_TELEMETRY=n -# Compile librte_rcu -CONFIG_RTE_LIBRTE_RCU=n -CONFIG_RTE_LIBRTE_RCU_DEBUG=n -# Compile librte_rib -CONFIG_RTE_LIBRTE_RIB=n -# Compile librte_fib -CONFIG_RTE_LIBRTE_FIB=n -CONFIG_RTE_LIBRTE_FIB_DEBUG=n -# Compile librte_lpm -CONFIG_RTE_LIBRTE_LPM=n -CONFIG_RTE_LIBRTE_LPM_DEBUG=n -# Compile librte_acl -CONFIG_RTE_LIBRTE_ACL=n -CONFIG_RTE_LIBRTE_ACL_DEBUG=n -# Compile librte_power -CONFIG_RTE_LIBRTE_POWER=n -CONFIG_RTE_LIBRTE_POWER_DEBUG=n -CONFIG_RTE_MAX_LCORE_FREQS=64 -# Compile librte_net -CONFIG_RTE_LIBRTE_NET=y -# Compile librte_ip_frag -CONFIG_RTE_LIBRTE_IP_FRAG=y -CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n -CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4 -CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n -# Compile GRO library -CONFIG_RTE_LIBRTE_GRO=y -# Compile GSO library -CONFIG_RTE_LIBRTE_GSO=y -# Compile librte_meter -CONFIG_RTE_LIBRTE_METER=y -# Compile librte_classify -CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n -# Compile librte_sched -CONFIG_RTE_LIBRTE_SCHED=n -CONFIG_RTE_SCHED_DEBUG=n -CONFIG_RTE_SCHED_RED=n -CONFIG_RTE_SCHED_COLLECT_STATS=n -CONFIG_RTE_SCHED_SUBPORT_TC_OV=n -CONFIG_RTE_SCHED_PORT_N_GRINDERS=8 -CONFIG_RTE_SCHED_VECTOR=n -# Compile architecture we compile for. distributor library -CONFIG_RTE_LIBRTE_DISTRIBUTOR=n -# Compile architecture we compile for. reorder library -CONFIG_RTE_LIBRTE_REORDER=n -# Compile librte_port -CONFIG_RTE_LIBRTE_PORT=n -CONFIG_RTE_PORT_STATS_COLLECT=n -CONFIG_RTE_PORT_PCAP=n -# Compile librte_table -CONFIG_RTE_LIBRTE_TABLE=n -CONFIG_RTE_TABLE_STATS_COLLECT=n -# Compile librte_pipeline -CONFIG_RTE_LIBRTE_PIPELINE=n -CONFIG_RTE_PIPELINE_STATS_COLLECT=n -# Compile librte_kni -CONFIG_RTE_LIBRTE_KNI=n -CONFIG_RTE_LIBRTE_PMD_KNI=n -CONFIG_RTE_KNI_KMOD=n -CONFIG_RTE_KNI_PREEMPT_DEFAULT=y -# Compile architecture we compile for. pdump library -CONFIG_RTE_LIBRTE_PDUMP=y -# Compile vhost user library -CONFIG_RTE_LIBRTE_VHOST=y -CONFIG_RTE_LIBRTE_VHOST_NUMA=y -CONFIG_RTE_LIBRTE_VHOST_DEBUG=n -# Compile vhost PMD -# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled. -CONFIG_RTE_LIBRTE_PMD_VHOST=y -# Compile IFC driver -# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO -# should be enabled. -CONFIG_RTE_LIBRTE_IFC_PMD=n -# Compile librte_bpf -CONFIG_RTE_LIBRTE_BPF=n -# allow load BPF from ELF files (requires libelf) -CONFIG_RTE_LIBRTE_BPF_ELF=n -# Compile librte_ipsec -CONFIG_RTE_LIBRTE_IPSEC=n -# Compile architecture we compile for. test application -CONFIG_RTE_APP_TEST=y -CONFIG_RTE_APP_TEST_RESOURCE_TAR=n -# Compile architecture we compile for. procinfo application -CONFIG_RTE_PROC_INFO=n -# Compile architecture we compile for. PMD test application -CONFIG_RTE_TEST_PMD=y -CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n -CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n -# Compile architecture we compile for. bbdev test application -CONFIG_RTE_TEST_BBDEV=n -# Compile architecture we compile for. compression performance application -CONFIG_RTE_APP_COMPRESS_PERF=n -# Compile architecture we compile for. crypto performance application -CONFIG_RTE_APP_CRYPTO_PERF=n -# Compile architecture we compile for. eventdev application -CONFIG_RTE_APP_EVENTDEV=n -CONFIG_RTE_EXEC_ENV_LINUX=y -CONFIG_RTE_EXEC_ENV_LINUXAPP=y -CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n -# Common libraries, before Bus/PMDs -# NXP DPAA BUS and drivers -# NXP FSLMC BUS and DPAA2 drivers -# NXP ENETC PMD Driver -# HINIC PMD driver -# Hisilicon HNS3 PMD driver -# Compile PMD for Intel FPGA raw device -# To compile, CONFIG_RTE_EAL_VFIO should be enabled. -CONFIG_RTE_ARCH_X86_64=y -CONFIG_RTE_ARCH_X86=y -CONFIG_RTE_ARCH_64=y -CONFIG_RTE_TOOLCHAIN_GCC=y diff --git a/SPECS/dpdk.spec b/SPECS/dpdk.spec index 3cd87c8..34f2787 100644 --- a/SPECS/dpdk.spec +++ b/SPECS/dpdk.spec @@ -8,10 +8,13 @@ #% define date 20191128 #% define shortcommit0 %(c=%{commit0}; echo ${c:0:7}) -%define ver 19.11.2 -%define rel 1 +%define ver 20.11 +%define rel 3 -%define srcname dpdk-stable +%define srcname dpdk + +%define ninjaver 1.8.2 +%define mesonver 0.49.2 Name: dpdk Version: %{ver} @@ -23,19 +26,16 @@ Source: http://dpdk.org/browse/dpdk/snapshot/dpdk-%{commit0}.tar.xz Source: http://fast.dpdk.org/rel/dpdk-%{ver}.tar.xz %endif +%if 0%{?rhel} && 0%{?rhel} < 8 +Source1: https://github.com/ninja-build/ninja/archive/v%{ninjaver}.tar.gz#/ninja-build-%{ninjaver}.tar.gz +Source2: https://github.com/mesonbuild/meson/releases/download/%{mesonver}/meson-%{mesonver}.tar.gz +%else +BuildRequires: meson +%endif + # Only needed for creating snapshot tarballs, not used in build itself Source100: dpdk-snapshot.sh -Source500: configlib.sh -Source501: gen_config_group.sh -Source502: set_config.sh - -# Important: source503 is used as the actual copy file -# @TODO: this causes a warning - fix it? -Source504: arm64-armv8a-linuxapp-gcc-config -Source505: ppc_64-power8-linuxapp-gcc-config -Source506: x86_64-native-linuxapp-gcc-config - # Patches only in dpdk package @@ -54,31 +54,12 @@ License: BSD and LGPLv2 and GPLv2 # needs extensive work to port it to other architectures. ExclusiveArch: x86_64 aarch64 ppc64le -# machine_arch maps between rpm and dpdk arch name, often same as _target_cpu -# machine_tmpl is the config template machine name, often "native" -# machine is the actual machine name used in the dpdk make system -%ifarch x86_64 -%define machine_arch x86_64 -%define machine_tmpl native -%define machine default -%endif -%ifarch aarch64 -%define machine_arch arm64 -%define machine_tmpl armv8a -%define machine armv8a -%endif -%ifarch ppc64le -%define machine_arch ppc_64 -%define machine_tmpl power8 -%define machine power8 -%endif - -%define target %{machine_arch}-%{machine_tmpl}-linuxapp-gcc - %define sdkdir %{_datadir}/%{name} %define docdir %{_docdir}/%{name} %define incdir %{_includedir}/%{name} -%define pmddir %{_libdir}/%{name}-pmds +%define pmddir %{_libdir}/%{name}-pmds + +%define venvdir %{_builddir}/venv %if 0%{?rhel} > 7 || 0%{?fedora} %define _py python3 @@ -95,8 +76,74 @@ Conflicts: dpdk-doc < 18.11-2 BuildRequires: gcc, kernel-headers, zlib-devel, numactl-devel BuildRequires: doxygen, %{_py}-devel, %{_py}-sphinx +BuildRequires: python3-devel %ifarch x86_64 -BuildRequires: rdma-core-devel >= 15 libmnl-devel +BuildRequires: rdma-core-devel >= 15 +%endif + +# Macros taked from ninja-build and meson packages and adapted to be defined here +# See /usr/lib/rpm/macros.d/macros.{ninja,meson} +%if 0%{?rhel} && 0%{?rhel} < 8 + +# RHEL-7 doesn't define _vpath_* macros yet +%if 0%{!?_vpath_srcdir:1} +%define _vpath_srcdir . +%endif +%if 0%{!?_vpath_builddir:1} +%define _vpath_builddir %_target_platform +%endif + +%define __ninja %{venvdir}/bin/ninja +%define __ninja_common_opts -v %{?_smp_mflags} + +%define ninja_build \ + %{__ninja} %{__ninja_common_opts} + +%define ninja_install \ + DESTDIR=%{buildroot} %{__ninja} install %{__ninja_common_opts} + +%define ninja_test \ + %{__ninja} test %{__ninja_common_opts} + +%define __meson %{venvdir}/bin/meson +%define __meson_wrap_mode nodownload +%define __meson_auto_features enabled + +%define meson \ + export CFLAGS="${CFLAGS:-%__global_cflags}" \ + export CXXFLAGS="${CXXFLAGS:-%__global_cxxflags}" \ + export FFLAGS="${FFLAGS:-%__global_fflags}" \ + export FCFLAGS="${FCFLAGS:-%__global_fcflags}" \ + export LDFLAGS="${LDFLAGS:-%__global_ldflags}" \ + %{__meson} \\\ + --buildtype=plain \\\ + --prefix=%{_prefix} \\\ + --libdir=%{_libdir} \\\ + --libexecdir=%{_libexecdir} \\\ + --bindir=%{_bindir} \\\ + --sbindir=%{_sbindir} \\\ + --includedir=%{_includedir} \\\ + --datadir=%{_datadir} \\\ + --mandir=%{_mandir} \\\ + --infodir=%{_infodir} \\\ + --localedir=%{_datadir}/locale \\\ + --sysconfdir=%{_sysconfdir} \\\ + --localstatedir=%{_localstatedir} \\\ + --sharedstatedir=%{_sharedstatedir} \\\ + --wrap-mode=%{__meson_wrap_mode} \\\ + --auto-features=%{__meson_auto_features} \\\ + %{_vpath_srcdir} %{_vpath_builddir} \\\ + %{nil} + +%define meson_build \ + %ninja_build -C %{_vpath_builddir} + +%define meson_install \ + %ninja_install -C %{_vpath_builddir} + +%define meson_test \ + %ninja_test -C %{_vpath_builddir} + %endif %description @@ -107,7 +154,7 @@ fast packet processing in the user space. Summary: Data Plane Development Kit development files Requires: %{name}%{?_isa} = %{version}-%{release} %ifarch x86_64 -Requires: rdma-core-devel libmnl-devel +Requires: rdma-core-devel %endif %description devel @@ -142,118 +189,103 @@ as L2 and L3 forwarding. %endif %prep -%autosetup -n %{srcname}-%{?commit0:%{commit0}}%{!?commit0:%{ver}} -p1 +%if 0%{?rhel} && 0%{?rhel} < 8 +%setup -q -a 1 -a 2 -n %{srcname}-%{?commit0:%{commit0}}%{!?commit0:%{ver}} +%else +%setup -q -n %{srcname}-%{?commit0:%{commit0}}%{!?commit0:%{ver}} +%endif +%autopatch -p1 %build -# In case dpdk-devel is installed -unset RTE_SDK RTE_INCLUDE RTE_TARGET +%if 0%{?rhel} && 0%{?rhel} < 8 +%{__python3} -m venv --clear %{venvdir} +pushd ninja-%{ninjaver} +%{venvdir}/bin/python configure.py --bootstrap --with-python %{venvdir}/bin/python +mv ninja %{venvdir}/bin +popd -# Avoid appending second -Wall to everything, it breaks upstream warning -# disablers in makefiles. Strip expclit -march= from optflags since they -# will only guarantee build failures, DPDK is picky with that. -# Note: _hardening_ldflags has to go on the extra cflags line because dpdk is -# astoundingly convoluted in how it processes its linker flags. Fixing it in -# dpdk is the preferred solution, but adjusting to allow a gcc option in the -# ldflags, even when gcc is used as the linker, requires large tree-wide changes -touch obj.o -gcc -### obj.o 2>&1 | awk '/.*collect2.*/ { print $0}' | sed -e 's/\S*\.res\S*//g' -e 's/-z \S*//g' -e 's/[^ ]*\.o//g' -e 's/ /\n/g' | sort -u > ./noopts.txt -gcc -### $RPM_LD_FLAGS obj.o 2>&1 | awk '/.*collect2.*/ {print $0}' | sed -e 's/\S*\.res\S*//g' -e 's/-z \S*//g' -e 's/[^ ]*\.o//g' -e 's/ /\n/g' | sort -u > ./opts.txt -EXTRA_RPM_LDFLAGS=$(comm -13 ./noopts.txt ./opts.txt) -rm -f obj.o +pushd meson-%{mesonver} +%{venvdir}/bin/python setup.py install +popd -export EXTRA_CFLAGS="$(echo %{optflags} | sed -e 's:-Wall::g' -e 's:-march=[[:alnum:]]* ::g') -Wformat -fPIC %{_hardening_ldflags}" -export EXTRA_LDFLAGS=$(echo %{__global_ldflags} | sed -e's/-Wl,//g' -e's/-spec.*//') -export HOST_EXTRA_CFLAGS="$EXTRA_CFLAGS $EXTRA_RPM_LDFLAGS" -export EXTRA_HOST_LDFLAGS="$EXTRA_RPM_LDFLAGS $(echo %{__global_ldflags} | sed -e's/-spec.*//')" - -# DPDK defaults to using builder-specific compiler flags. However, -# the config has been changed by specifying CONFIG_RTE_MACHINE=default -# in order to build for a more generic host. NOTE: It is possible that -# the compiler flags used still won't work for all Fedora-supported -# machines, but runtime checks in DPDK will catch those situations. - -make V=1 O=%{target} T=%{target} %{?_smp_mflags} config - -cp -f %{SOURCE500} %{SOURCE502} "%{_sourcedir}/%{target}-config" . -%{SOURCE502} %{target}-config "%{target}/.config" - -make V=1 O=%{target} %{?_smp_mflags} - -# Creating PDF's has excessive build-requirements, html docs suffice fine -make V=1 O=%{target} %{?_smp_mflags} doc-api-html doc-guides-html - -%if %{with examples} -make V=1 O=%{target}/examples T=%{target} %{?_smp_mflags} examples +export PATH="%{venvdir}/bin:$PATH" %endif +ENABLED_DRIVERS=( + bus/pci + bus/vdev + mempool/ring + net/failsafe + net/i40e + net/ring + net/vhost + net/virtio + net/tap +) + +%ifarch x86_64 +ENABLED_DRIVERS+=( + bus/vmbus + common/iavf + common/mlx5 + net/bnxt + net/enic + net/iavf + net/ice + net/mlx4 + net/mlx5 + net/netvsc + net/nfp + net/qede + net/vdev_netvsc +) +%endif + +%ifarch aarch64 x86_64 +ENABLED_DRIVERS+=( + net/e1000 + net/ixgbe +) +%endif + +# Since upstream doesn't have a way +for driver in drivers/*/*/; do + driver=${driver#drivers/} + driver=${driver%/} + [[ " ${ENABLED_DRIVERS[@]} " == *" $driver "* ]] || \ + disable_drivers="${disable_drivers:+$disable_drivers,}"$driver +done + +%meson --includedir=include/dpdk \ + --default-library=shared \ + -Ddisable_drivers="$disable_drivers" \ + -Ddrivers_install_subdir=dpdk-pmds \ + -Denable_docs=true \ + -Dmachine=default \ + -Dmax_ethports=32 \ + -Dmax_numa_nodes=8 \ + -Dtests=false +%meson_build + %install -# In case dpdk-devel is installed -unset RTE_SDK RTE_INCLUDE RTE_TARGET - -%make_install O=%{target} prefix=%{_usr} libdir=%{_libdir} - -# Replace /usr/bin/env python with the correct python binary -find %{buildroot}%{sdkdir}/ -name "*.py" -exec \ - sed -i -e 's|#!\s*/usr/bin/env python|#!%{_py_exec}|' {} + - -# Create a driver directory with symlinks to all pmds -mkdir -p %{buildroot}/%{pmddir} -for f in %{buildroot}/%{_libdir}/*_pmd_*.so.*; do - bn=$(basename ${f}) - ln -s ../${bn} %{buildroot}%{pmddir}/${bn} -done - -%if ! %{with tools} -rm -rf %{buildroot}%{sdkdir}/usertools -rm -rf %{buildroot}%{_sbindir}/dpdk-devbind +%if 0%{?rhel} && 0%{?rhel} < 8 +export PATH="%{venvdir}/bin:$PATH" %endif -rm -f %{buildroot}%{sdkdir}/usertools/dpdk-pmdinfo.py -rm -f %{buildroot}%{sdkdir}/usertools/dpdk-setup.sh -rm -f %{buildroot}%{sdkdir}/usertools/meson.build + +%meson_install + +# FIXME this file doesn't have chmod +x upstream +chmod +x %{buildroot}%{sdkdir}/examples/pipeline/examples/vxlan_table.py + rm -f %{buildroot}%{_bindir}/dpdk-pdump -rm -f %{buildroot}%{_bindir}/dpdk-pmdinfo -rm -f %{buildroot}%{_bindir}/dpdk-test-crypto-perf -rm -f %{buildroot}%{_bindir}/dpdk-test-eventdev - -%if %{with examples} -find %{target}/examples/ -name "*.map" | xargs rm -f -for f in %{target}/examples/*/%{target}/app/*; do - bn=`basename ${f}` - cp -p ${f} %{buildroot}%{_bindir}/dpdk-${bn} -done -%else -rm -rf %{buildroot}%{sdkdir}/examples -%endif - -# Due to RPM limitations delete the backwards compatibility symlinks -rm -f %{buildroot}%{sdkdir}/mk/exec-env/bsdapp -rm -f %{buildroot}%{sdkdir}/mk/exec-env/linuxapp - -# Setup RTE_SDK environment as expected by apps etc -mkdir -p %{buildroot}/%{_sysconfdir}/profile.d -cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh -if [ -z "\${RTE_SDK}" ]; then - export RTE_SDK="%{sdkdir}" - export RTE_TARGET="%{target}" - export RTE_INCLUDE="%{incdir}" -fi -EOF - -cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.csh -if ( ! \$RTE_SDK ) then - setenv RTE_SDK "%{sdkdir}" - setenv RTE_TARGET "%{target}" - setenv RTE_INCLUDE "%{incdir}" -endif -EOF - -# Fixup target machine mismatch -sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk* +rm -f %{buildroot}%{_bindir}/dpdk-proc-info +rm -f %{buildroot}%{_bindir}/dpdk-test{,-acl,-bbdev,-cmdline,-compress-perf,-crypto-perf,-eventdev,-pipeline,-sad,-fib,-flow-perf,-regex} +rm -f %{buildroot}%{_libdir}/*.a %files # BSD %doc README MAINTAINERS -%{_bindir}/testpmd +%{_bindir}/dpdk-testpmd %dir %{pmddir} %{_libdir}/*.so.* %{pmddir}/*.so.* @@ -269,13 +301,15 @@ sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profi %{incdir}/ %{sdkdir}/ %if %{with tools} -%exclude %{sdkdir}/usertools/ +%exclude %{_bindir}/dpdk-*.py %endif %if %{with examples} %exclude %{sdkdir}/examples/ %endif -%{_sysconfdir}/profile.d/dpdk-sdk-*.* %{_libdir}/*.so +%{pmddir}/*.so +%{_libdir}/pkgconfig/libdpdk.pc +%{_libdir}/pkgconfig/libdpdk-libs.pc %if %{with examples} %files examples %{_bindir}/dpdk-* @@ -284,11 +318,22 @@ sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profi %if %{with tools} %files tools -%{sdkdir}/usertools/ -%{_sbindir}/dpdk-devbind +%{_bindir}/dpdk-*.py %endif %changelog +* Tue Feb 16 2021 Timothy Redaelli - 20.11-3 +- Fix gating since on DPDK 20.11 testpmd is called dpdk-testpmd + +* Wed Feb 10 2021 Timothy Redaelli - 20.11-2 +- Enable ice PMD for x86_64 (#1927179) + +* Tue Dec 01 2020 Timothy Redaelli - 20.11-1 +- Rebase DPDK to 20.11 using meson build system (#1908446) + +* Thu Aug 13 2020 Timothy Redaelli - 19.11.3-1 +- Rebase DPDK to 19.11.3 (#1868708) + * Wed May 20 2020 Timothy Redaelli - 19.11.2-1 - Rebase DPDK to 19.11.2 (#1836830, #1837024, #1837030, #1837022)