import dpdk-18.11-3.el8

This commit is contained in:
CentOS Sources 2019-08-02 09:05:55 -04:00 committed by Stepan Oksanichenko
commit 3a7d9efcac
13 changed files with 2803 additions and 0 deletions

1
.dpdk.metadata Normal file
View File

@ -0,0 +1 @@
9f538fb3449205bccca93073d79176636134705b SOURCES/dpdk-18.11.tar.xz

1
.gitignore vendored Normal file
View File

@ -0,0 +1 @@
SOURCES/dpdk-18.11.tar.xz

View File

@ -0,0 +1,57 @@
From 25363eb99bc43443bec354abea1e40db61280b30 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <sthemmin@microsoft.com>
Date: Wed, 5 Dec 2018 14:11:56 -0800
Subject: [PATCH 1/3] bus/vmbus: fix race in subchannel creation
[ upstream commit 4970103e89f4f828669acf3b465e984fdc891e1e ]
When using multiple queues, there was a race with the kernel
in setting up the second channel. This regression is due to a kernel change
which does not allow accessing sysfs files for Hyper-V channels that are not opened.
The fix is simple, just move the logic to detect not ready
sub channels earlier in the existing loop.
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Reported-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
(cherry picked from commit ca17e6624251b05cf188997cffc3e1ab2e50561a)
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
drivers/bus/vmbus/linux/vmbus_uio.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/bus/vmbus/linux/vmbus_uio.c b/drivers/bus/vmbus/linux/vmbus_uio.c
index 12e97e3a4..38df4d724 100644
--- a/drivers/bus/vmbus/linux/vmbus_uio.c
+++ b/drivers/bus/vmbus/linux/vmbus_uio.c
@@ -357,6 +357,12 @@ int vmbus_uio_get_subchan(struct vmbus_channel *primary,
continue;
}
+ if (!vmbus_isnew_subchannel(primary, relid))
+ continue; /* Already know about you */
+
+ if (!vmbus_uio_ring_present(dev, relid))
+ continue; /* Ring may not be ready yet */
+
snprintf(subchan_path, sizeof(subchan_path), "%s/%lu",
chan_path, relid);
err = vmbus_uio_sysfs_read(subchan_path, "subchannel_id",
@@ -370,12 +376,6 @@ int vmbus_uio_get_subchan(struct vmbus_channel *primary,
if (subid == 0)
continue; /* skip primary channel */
- if (!vmbus_isnew_subchannel(primary, relid))
- continue;
-
- if (!vmbus_uio_ring_present(dev, relid))
- continue; /* Ring may not be ready yet */
-
err = vmbus_uio_sysfs_read(subchan_path, "monitor_id",
&monid, UINT8_MAX);
if (err) {
--
2.20.1

View File

@ -0,0 +1,38 @@
From da9c7a3059fb4cffef8d1101a247fafabd9be7bd Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <sthemmin@microsoft.com>
Date: Wed, 5 Dec 2018 14:11:57 -0800
Subject: [PATCH 2/3] net/netvsc: enable SR-IOV
[ upstream commit 825ab257b5ce8235ab0cdc260e5b7b757e102875 ]
Make DPDK enable SRIOV flag in same way as Linux and FreeBSD.
Fixes: dc7680e8597c ("net/netvsc: support integrated VF")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
(cherry picked from commit 21dc946c2b5524c7e6ec1fe4079864f3322dd483)
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
drivers/net/netvsc/hn_nvs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/netvsc/hn_nvs.c b/drivers/net/netvsc/hn_nvs.c
index 9690c5f8a..d58770e04 100644
--- a/drivers/net/netvsc/hn_nvs.c
+++ b/drivers/net/netvsc/hn_nvs.c
@@ -326,9 +326,9 @@ hn_nvs_conf_ndis(struct hn_data *hv, unsigned int mtu)
conf.mtu = mtu + ETHER_HDR_LEN;
conf.caps = NVS_NDIS_CONF_VLAN;
- /* TODO enable SRIOV */
- //if (hv->nvs_ver >= NVS_VERSION_5)
- // conf.caps |= NVS_NDIS_CONF_SRIOV;
+ /* enable SRIOV */
+ if (hv->nvs_ver >= NVS_VERSION_5)
+ conf.caps |= NVS_NDIS_CONF_SRIOV;
/* NOTE: No response. */
error = hn_nvs_req_send(hv, &conf, sizeof(conf));
--
2.20.1

View File

@ -0,0 +1,46 @@
From 0598625d2e17374b7d5693972f5acb59fef25f63 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <sthemmin@microsoft.com>
Date: Wed, 5 Dec 2018 14:11:58 -0800
Subject: [PATCH 3/3] net/netvsc: disable multi-queue on older servers
[ upstream commit afbc22bf51ab98b9b61b11eb6d38278a9d577111 ]
NDIS multi-queue support is only in WS2012 or later. Check the NDIS
version to limit to single queue on older versions. Similar code
exists in Linux driver.
Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
(cherry picked from commit d387b7ae45a520970ff55ea6ce75b48d5e69c4d9)
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
drivers/net/netvsc/hn_ethdev.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/netvsc/hn_ethdev.c b/drivers/net/netvsc/hn_ethdev.c
index b330bf3d7..1256fa399 100644
--- a/drivers/net/netvsc/hn_ethdev.c
+++ b/drivers/net/netvsc/hn_ethdev.c
@@ -732,6 +732,7 @@ eth_hn_dev_init(struct rte_eth_dev *eth_dev)
hv->chim_res = &vmbus->resource[HV_SEND_BUF_MAP];
hv->port_id = eth_dev->data->port_id;
hv->latency = HN_CHAN_LATENCY_NS;
+ hv->max_queues = 1;
err = hn_parse_args(eth_dev);
if (err)
@@ -770,6 +771,10 @@ eth_hn_dev_init(struct rte_eth_dev *eth_dev)
if (err)
goto failed;
+ /* Multi queue requires later versions of windows server */
+ if (hv->nvs_ver < NVS_VERSION_5)
+ return 0;
+
max_chan = rte_vmbus_max_channels(vmbus);
PMD_INIT_LOG(DEBUG, "VMBus max channels %d", max_chan);
if (max_chan <= 0)
--
2.20.1

View File

@ -0,0 +1,540 @@
# -*- cfg-sha: 9fc8b53ccd53cc8b64391f6252e1dba558ae660a73a72f10dcadff2ca5462243
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2015 Cavium, Inc
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Cavium, Inc
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2016 Intel Corporation
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
# RTE_EXEC_ENV values are the directories in mk/exec-env/
CONFIG_RTE_EXEC_ENV="linuxapp"
# RTE_ARCH values are architecture we compile for. directories in mk/arch/
CONFIG_RTE_ARCH="arm64"
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are architecture we compile for. directories in mk/machine/
CONFIG_RTE_MACHINE="armv8a"
# The compiler we use.
# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/
CONFIG_RTE_TOOLCHAIN="gcc"
# Use intrinsics or assembly code for key routines
CONFIG_RTE_FORCE_INTRINSICS=y
# Machine forces strict alignment constraints.
CONFIG_RTE_ARCH_STRICT_ALIGN=n
# Compile to share library
CONFIG_RTE_BUILD_SHARED_LIB=y
# Use newest code breaking previous ABI
CONFIG_RTE_NEXT_ABI=n
# Major ABI to overwrite library specific LIBABIVER
CONFIG_RTE_MAJOR_ABI=
# Machine's cache line size
CONFIG_RTE_CACHE_LINE_SIZE=128
# Memory model
CONFIG_RTE_USE_C11_MEM_MODEL=y
# Compile Environment Abstraction Layer
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=256
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=y
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y
CONFIG_RTE_USE_LIBBSD=n
# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds"
# Compile Environment Abstraction Layer to support Vmware TSC map
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
# Compile architecture we compile for. PCI library
CONFIG_RTE_LIBRTE_PCI=y
# Compile architecture we compile for. argument parser library
CONFIG_RTE_LIBRTE_KVARGS=y
# Compile generic ethernet library
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
# Turn off Tx preparation stage
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
# Common libraries, before Bus/PMDs
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
# Compile architecture we compile for. Intel FPGA bus
CONFIG_RTE_LIBRTE_IFPGA_BUS=n
# Compile PCI bus driver
CONFIG_RTE_LIBRTE_PCI_BUS=y
# Compile architecture we compile for. vdev bus
CONFIG_RTE_LIBRTE_VDEV_BUS=y
# Compile ARK PMD
CONFIG_RTE_LIBRTE_ARK_PMD=n
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
# Compile Aquantia Atlantic PMD driver
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n
# Compile AMD PMD
CONFIG_RTE_LIBRTE_AXGBE_PMD=n
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
# Compile burst-oriented Broadcom PMD driver
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
# Compile burst-oriented Broadcom BNXT PMD driver
CONFIG_RTE_LIBRTE_BNXT_PMD=n
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
CONFIG_RTE_LIBRTE_CXGBE_PMD=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
# Compile NXP DPAA2 FSL-MC Bus
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
# Compile Support Libraries for NXP DPAA2
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
# Compile burst-oriented NXP DPAA2 PMD driver
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
# Compile NXP ENETC PMD Driver
CONFIG_RTE_LIBRTE_ENETC_PMD=n
# Compile burst-oriented Amazon ENA PMD driver
CONFIG_RTE_LIBRTE_ENA_PMD=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
# Compile burst-oriented Cisco ENIC PMD driver
CONFIG_RTE_LIBRTE_ENIC_PMD=n
# Compile burst-oriented IGB & EM PMD drivers
CONFIG_RTE_LIBRTE_EM_PMD=n
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
# Compile burst-oriented IXGBE PMD driver
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
# Compile burst-oriented I40E PMD driver
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
# Compile burst-oriented FM10K PMD
CONFIG_RTE_LIBRTE_FM10K_PMD=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
# Compile burst-oriented AVF PMD driver
CONFIG_RTE_LIBRTE_AVF_PMD=n
CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
# (MLX5) PMD
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
# Compile burst-oriented Netronome NFP PMD driver
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
CONFIG_RTE_LIBRTE_QEDE_PMD=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of architecture we compile for. firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
# Compile burst-oriented Solarflare libefx-based PMD
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
# Compile software PMD backed by SZEDATA2 device
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
# Compile burst-oriented Cavium LiquidIO PMD driver
CONFIG_RTE_LIBRTE_LIO_PMD=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
# Compile burst-oriented Cavium OCTEONTX network PMD driver
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n
# Compile WRS accelerated virtual port (AVP) guest PMD driver
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
# Compile burst-oriented VIRTIO PMD driver
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
# Compile virtio device emulation inside virtio PMD driver
CONFIG_RTE_VIRTIO_USER=n
# Compile burst-oriented VMXNET3 PMD driver
CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
# Compile software PMD backed by AF_PACKET sockets (Linux only)
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
# Compile link bonding PMD library
CONFIG_RTE_LIBRTE_PMD_BOND=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
# Compile fail-safe PMD
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
# Compile Marvell PMD driver
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
# Compile Marvell MVNETA PMD driver
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
# Compile support for VMBus library
CONFIG_RTE_LIBRTE_VMBUS=n
# Compile native PMD for Hyper-V/Azure
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
# Compile virtual device driver for NetVSC on Hyper-V/Azure
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
# Compile null PMD
CONFIG_RTE_LIBRTE_PMD_NULL=n
# Compile software PMD backed by PCAP files
CONFIG_RTE_LIBRTE_PMD_PCAP=n
# Compile example software rings based PMD
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
# Compile SOFTNIC PMD
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
# Compile architecture we compile for. TAP PMD
# It is enabled by default for Linux only.
CONFIG_RTE_LIBRTE_PMD_TAP=y
# Do prefetch of packet data within PMD driver receive function
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
CONFIG_RTE_LIBRTE_BBDEV=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=n
# Compile PMD for NULL bbdev device
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
# Compile PMD for turbo software bbdev device
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
# Compile generic crypto device library
CONFIG_RTE_LIBRTE_CRYPTODEV=n
CONFIG_RTE_CRYPTO_MAX_DEVS=64
# Compile PMD for ARMv8 Crypto device
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
# Compile NXP CAAM JR crypto Driver
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
# Compile NXP DPAA2 crypto sec driver for CAAM HW
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
# NXP DPAA caam - crypto driver
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
# Compile PMD for Cavium OCTEON TX crypto device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
# Compile PMD for QuickAssist based devices - see docs for details
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
# Max. number of QuickAssist devices, which can be detected and attached
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
# Compile PMD for virtio crypto devices
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n
# Number of maximum virtio crypto devices
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
# Compile PMD for AESNI backed device
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
# Compile PMD for Software backed device
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
# Compile PMD for AESNI GCM device
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
# Compile PMD for SNOW 3G device
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
# Compile PMD for KASUMI device
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
# Compile PMD for ZUC device
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n
# Compile PMD for NULL Crypto device
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n
# Compile PMD for AMD CCP crypto device
CONFIG_RTE_LIBRTE_PMD_CCP=n
# Compile PMD for Marvell Crypto device
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
# Compile generic security library
CONFIG_RTE_LIBRTE_SECURITY=n
# Compile generic compression device library
CONFIG_RTE_LIBRTE_COMPRESSDEV=n
CONFIG_RTE_COMPRESS_MAX_DEVS=64
# Compile compressdev unit test
CONFIG_RTE_COMPRESSDEV_TEST=n
# Compile PMD for Octeontx ZIPVF compression device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n
# Compile PMD for ISA-L compression device
CONFIG_RTE_LIBRTE_PMD_ISAL=n
# Compile PMD for ZLIB compression device
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
# Compile generic event device library
CONFIG_RTE_LIBRTE_EVENTDEV=n
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
# Compile PMD for skeleton event device
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
# Compile PMD for software event device
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n
# Compile PMD for distributed software event device
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n
# Compile PMD for octeontx sso event device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n
# Compile PMD for OPDL event device
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n
# Compile PMD for NXP DPAA event device
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
# Compile PMD for NXP DPAA2 event device
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
CONFIG_RTE_LIBRTE_RAWDEV=n
CONFIG_RTE_RAWDEV_MAX_DEVS=10
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n
# Compile PMD for NXP DPAA2 CMDIF raw device
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
# Compile PMD for NXP DPAA2 QDMA raw device
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
# Compile PMD for Intel FPGA raw device
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
# Compile librte_ring
CONFIG_RTE_LIBRTE_RING=y
# Compile librte_mempool
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
# Compile Mempool drivers
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
# Compile PMD for octeontx fpa mempool device
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n
# Compile librte_mbuf
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
# Compile librte_timer
CONFIG_RTE_LIBRTE_TIMER=n
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
# Compile librte_cfgfile
CONFIG_RTE_LIBRTE_CFGFILE=n
# Compile librte_cmdline
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
# Compile librte_hash
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
# Compile librte_efd
CONFIG_RTE_LIBRTE_EFD=n
# Compile librte_member
CONFIG_RTE_LIBRTE_MEMBER=y
# Compile librte_jobstats
CONFIG_RTE_LIBRTE_JOBSTATS=n
# Compile architecture we compile for. device metrics library
CONFIG_RTE_LIBRTE_METRICS=y
# Compile architecture we compile for. bitrate statistics library
CONFIG_RTE_LIBRTE_BITRATE=y
# Compile architecture we compile for. latency statistics library
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
# Compile librte_telemetry
CONFIG_RTE_LIBRTE_TELEMETRY=n
# Compile librte_lpm
CONFIG_RTE_LIBRTE_LPM=n
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
# Compile librte_acl
CONFIG_RTE_LIBRTE_ACL=n
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
# Compile librte_power
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
# Compile librte_net
CONFIG_RTE_LIBRTE_NET=y
# Compile librte_ip_frag
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
# Compile GRO library
CONFIG_RTE_LIBRTE_GRO=y
# Compile GSO library
CONFIG_RTE_LIBRTE_GSO=y
# Compile librte_meter
CONFIG_RTE_LIBRTE_METER=y
# Compile librte_classify
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n
# Compile librte_sched
CONFIG_RTE_LIBRTE_SCHED=n
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
# Compile architecture we compile for. distributor library
CONFIG_RTE_LIBRTE_DISTRIBUTOR=n
# Compile architecture we compile for. reorder library
CONFIG_RTE_LIBRTE_REORDER=n
# Compile librte_port
CONFIG_RTE_LIBRTE_PORT=n
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
# Compile librte_table
CONFIG_RTE_LIBRTE_TABLE=n
CONFIG_RTE_TABLE_STATS_COLLECT=n
# Compile librte_pipeline
CONFIG_RTE_LIBRTE_PIPELINE=n
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
# Compile librte_kni
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_KMOD_ETHTOOL=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
# Compile architecture we compile for. pdump library
CONFIG_RTE_LIBRTE_PDUMP=y
# Compile vhost user library
CONFIG_RTE_LIBRTE_VHOST=y
CONFIG_RTE_LIBRTE_VHOST_NUMA=y
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
CONFIG_RTE_LIBRTE_PMD_VHOST=y
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
CONFIG_RTE_LIBRTE_IFC_PMD=n
# Compile librte_bpf
CONFIG_RTE_LIBRTE_BPF=n
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
# Compile architecture we compile for. test application
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
# Compile architecture we compile for. procinfo application
CONFIG_RTE_PROC_INFO=y
# Compile architecture we compile for. PMD test application
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
# Compile architecture we compile for. bbdev test application
CONFIG_RTE_TEST_BBDEV=n
# Compile architecture we compile for. crypto performance application
CONFIG_RTE_APP_CRYPTO_PERF=n
# Compile architecture we compile for. eventdev application
CONFIG_RTE_APP_EVENTDEV=n
CONFIG_RTE_EXEC_ENV_LINUXAPP=y
CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n
# Common libraries, before Bus/PMDs
# NXP DPAA BUS and drivers
# NXP FSLMC BUS and DPAA2 drivers
# NXP ENETC PMD Driver
CONFIG_RTE_ARCH_ARM64=y
CONFIG_RTE_ARCH_64=y
# Maximum available cache line size in arm64 implementations.
# Setting to maximum available cache line size in generic config
# to address minimum DMA alignment across all arm64 implementations.
# Accelarate rte_memcpy. Be sure to run unit test (memcpy_perf_autotest)
# to determine architecture we compile for. best threshold in code. Refer to notes in source file
# (lib/librte_eal/common/include/arch/arm/rte_memcpy_64.h) for more info.
CONFIG_RTE_ARCH_ARM64_MEMCPY=n
#CONFIG_RTE_ARM64_MEMCPY_ALIGNED_THRESHOLD=2048
#CONFIG_RTE_ARM64_MEMCPY_UNALIGNED_THRESHOLD=512
# Leave below RTE_ARM64_MEMCPY_xxx options commented out, unless there're
# strong reasons.
#CONFIG_RTE_ARM64_MEMCPY_SKIP_GCC_VER_CHECK=n
#CONFIG_RTE_ARM64_MEMCPY_ALIGN_MASK=0xF
#CONFIG_RTE_ARM64_MEMCPY_STRICT_ALIGN=n
CONFIG_RTE_TOOLCHAIN_GCC=y
CONFIG_RTE_LIBRTE_PMD_XENVIRT=n

104
SOURCES/configlib.sh Normal file
View File

@ -0,0 +1,104 @@
# Copyright (C) 2017, Red Hat, Inc.
#
# Core configuration file library.
# Configurations are determined by sha values. The way to determine is by
# the special text:
# $FILE_COMMENT_TYPE -*- cfg-sha: $SHA256 -*-
export LC_ALL=C
# check required binaries
__check_reqd_binaries() {
local BIN __binaries=("egrep" "sort" "sha256sum" "sed")
for BIN in $__binaries; do
if ! type -P $BIN >/dev/null 2>&1; then
echo "Binary $BIN not found. Please install."
exit 1
fi
done
}
# Calculates a sha from a file
# The algorithm for generating a sha from a config is thus:
#
# 1. Remove all comment lines and blank lines
# 2. Sort the content
# 3. generate the sha-256 sum
#
# From a script perspective, this means:
# egrep -v ^\# %file% | egrep -v ^$ | sort -u | sha256sum
#
# Params:
# $1 = output variable
# $2 = file to use to calculate the shasum
# $3 = file comment type (defaults to # if unspecified)
calc_sha() {
__check_reqd_binaries
if [ "$1" == "" ]; then
echo "Please pass in a storage variable."
return 1
fi
local __resultvar=$1
__retval=1
shift
local __file=$1
local cmnt=${2:-#}
if [ -f "$__file" ]; then
local __shasum=$(egrep -v ^"$cmnt" "$__file" | egrep -v ^$ | sort -u | sha256sum -t | cut -d" " -f1)
eval $__resultvar="'$__shasum'"
__retval=0
fi
return $__retval
}
# Retrieves a sha stored in a file
# Param:
# $1 = output variable
# $2 = file to use to calculate the shasum
# $3 = file comment type (defaults to # if unspecified)
retr_sha() {
__check_reqd_binaries
if [ "$1" == "" ]; then
echo "Please pass in a storage variable."
return 1
fi
local __resultvar=$1
__retval=1
shift
local __file=$1
local cmnt=${2:-#}
if [ -f "$__file" ]; then
if grep -q "$cmnt -\*- cfg-sha:" "$__file"; then
local __shasum=$(grep "$cmnt -\*- cfg-sha:" "$__file" | sed -e "s@$cmnt -\*- cfg-sha: @@" | cut -d" " -f1)
eval $__resultvar="'$__shasum'"
__retval=0
fi
fi
return $__retval
}
# Set a config value
# set_conf dpdk_build_tree parameter value
# dpdk_build_tree is the directory where the .config lives
# parameter is the config parameter
# value is the value to set for the config parameter
set_conf() {
c="$1/.config"
shift
if grep -q "$1" "$c"; then
sed -i "s:^$1=.*$:$1=$2:g" $c
else
echo $1=$2 >> "$c"
fi
}

13
SOURCES/dpdk-snapshot.sh Normal file
View File

@ -0,0 +1,13 @@
#!/bin/bash
snapgit=`git log --pretty=oneline -n1|cut -c1-8`
snapser=`git log --pretty=oneline | wc -l`
makever=`make showversion`
basever=`echo ${makever} | cut -d- -f1`
prefix=dpdk-${basever}-${snapser}.git${snapgit}
archive=${prefix}.tar.gz
echo "Creating ${archive}"
git archive --prefix=${prefix}/ HEAD | gzip -9 > ${archive}

225
SOURCES/gen_config_group.sh Executable file
View File

@ -0,0 +1,225 @@
#!/bin/bash
source configlib.sh
# Generates arch configurations in the current directory based on
# 1. an dpdk.spec file
# 2. an expanded dpdk tree
if (( $# != 2 )); then
echo "$0: dpdk.spec dpdk_tree" >&2
exit 1
fi
DPDKSPEC="$1"
DPDKDIR="$2"
# accumulate all arch + name triples
DPDK_CONF_MACH_ARCH=()
for arch in $(grep %define\ machine_arch "$DPDKSPEC" | sed 's@%define machine_arch @@')
do
DPDK_CONF_MACH_ARCH+=($arch)
done
DPDK_CONF_MACH_TMPL=()
for tmpl in $(grep %define\ machine_tmpl "$DPDKSPEC" | sed 's@%define machine_tmpl @@')
do
DPDK_CONF_MACH_TMPL+=($tmpl)
done
DPDK_CONF_MACH=()
for mach in $(grep %define\ machine\ "$DPDKSPEC" | sed 's@%define machine @@')
do
DPDK_CONF_MACH+=($mach)
done
DPDK_TARGETS=()
for ((i=0; i < ${#DPDK_CONF_MACH[@]}; i++));
do
DPDK_TARGETS+=("${DPDK_CONF_MACH_ARCH[$i]}-${DPDK_CONF_MACH_TMPL[$i]}-linuxapp-gcc")
echo "DPDK-target: ${DPDK_TARGETS[$i]}"
done
OUTPUT_DIR=$(pwd)
pushd "$DPDKDIR"
for ((i=0; i < ${#DPDK_TARGETS[@]}; i++));
do
echo "For ${DPDK_TARGETS[$i]}:"
echo " a. Generating initial config"
echo " make V=1 T=${DPDK_TARGETS[$i]} O=${DPDK_TARGETS[$i]}"
make V=1 T=${DPDK_TARGETS[$i]} O=${DPDK_TARGETS[$i]} -j8 config
ORIG_SHA=""
OUTDIR="${DPDK_TARGETS[$i]}"
echo " b. calculating and applying sha"
calc_sha ORIG_SHA "${OUTDIR}/.config"
if [ "$ORIG_SHA" == "" ]; then
echo "ERROR: Unable to get sha for arch ${DPDK_TARGETS[$i]}"
exit 1
fi
echo "# -*- cfg-sha: ${ORIG_SHA}" > ${OUTDIR}/.config.new
cat "${OUTDIR}/.config" >> "${OUTDIR}/.config.new"
cp "${OUTDIR}/.config" "${OUTDIR}/.config.orig"
mv -f "${OUTDIR}/.config.new" "${OUTDIR}/.config"
echo " c. setting initial configurations"
# these are the original setconf values from dpdk.spec
set_conf "${OUTDIR}" CONFIG_RTE_MACHINE "\\\"${DPDK_CONF_MACH[$i]}\\\""
# Enable automatic driver loading from this path
set_conf "${OUTDIR}" CONFIG_RTE_EAL_PMD_PATH '"/usr/lib64/dpdk-pmds"'
# Disable DPDK libraries not needed
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_TIMER n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CFGFILE n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_JOBSTATS n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_LPM n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_ACL n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_POWER n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_SCHED n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DISTRIBUTOR n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_REORDER n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PORT n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_TABLE n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PIPELINE n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_KNI n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CRYPTODEV n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_SECURITY n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_FLOW_CLASSIFY n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BBDEV n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_COMPRESSDEV n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BPF n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DPAA_MEMPOOL n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CFGFILE n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_EFD n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_FLOW_CLASSIFY n
# Disable all eventdevs
for eventdev in $(grep _EVENTDEV= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g')
do
set_conf "${OUTDIR}" $eventdev n
done
# Disable all rawdevs
for rawdev in $(grep _RAWDEV= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g')
do
set_conf "${OUTDIR}" $rawdev n
done
# Disable virtio user
set_conf "${OUTDIR}" CONFIG_RTE_VIRTIO_USER n
# Enable vhost numa as libnuma dep is ok
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VHOST_NUMA y
# start by disabling ALL PMDs
for pmd in $(grep _PMD= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g')
do
set_conf "${OUTDIR}" $pmd n
done
# PMDs which have their own naming scheme
# the default for this was 'n' at one point. Make sure we keep it
# as such
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_QAT n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VHOST n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_KNI n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_XENVIRT n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_NULL n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_PCAP n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_BOND n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_AF_PACKET n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SOFTNIC n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_DPAA_SEC n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_COMMON_DPAAX n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CAAM_JR n
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE n
# whitelist of enabled PMDs
# Soft PMDs to enable
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_RING y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VHOST y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VIRTIO_PMD y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_TAP y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_FAILSAFE y
# start by disabling all buses
for bus in $(grep _BUS= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g')
do
set_conf "${OUTDIR}" $bus n
done
# blacklist buses that don't conform to std naming
# May override VMBUS later in arch specific section
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VMBUS n
# whitelist buses
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PCI_BUS y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VDEV_BUS y
# Disable some other miscellanous items related to test apps
set_conf "${OUTDIR}" CONFIG_RTE_TEST_BBDEV n
set_conf "${OUTDIR}" CONFIG_RTE_APP_CRYPTO_PERF n
# Disable kernel modules
set_conf "${OUTDIR}" CONFIG_RTE_EAL_IGB_UIO n
set_conf "${OUTDIR}" CONFIG_RTE_KNI_KMOD n
# Disable experimental stuff
set_conf "${OUTDIR}" CONFIG_RTE_NEXT_ABI n
# Build DPDK as shared library
set_conf "${OUTDIR}" CONFIG_RTE_BUILD_SHARED_LIB y
# Compile the PMD test application
set_conf "${OUTDIR}" CONFIG_RTE_TEST_PMD y
# Arch specific
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_I40E_PMD y
case "${DPDK_CONF_MACH_ARCH[i]}" in
x86_64)
# Hw PMD
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BNXT_PMD y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_ENIC_PMD y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX4_PMD y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX5_PMD y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_NFP_PMD y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_QEDE_PMD y
# Sw PMD
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_NETVSC_PMD y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD y
# Bus
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VMBUS y
;&
arm64)
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_IXGBE_PMD y
set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_IGB_PMD y
;;
esac
cp "${OUTDIR}/.config" "${OUTPUT_DIR}/${DPDK_TARGETS[$i]}-config"
done
popd >/dev/null
echo -n "For each arch ( "
for ((i=0; i < ${#DPDK_CONF_MACH_ARCH[@]}; i++));
do
echo -n "${DPDK_CONF_MACH_ARCH[i]} "
done
echo "):"
echo "1. ensure you enable the requisite hw"

View File

@ -0,0 +1,550 @@
# -*- cfg-sha: ac783e64ca20c977a7c1c42e72e6dce151b31aa9aecfbfa121b45e49e938f418
# BSD LICENSE
# Copyright (C) IBM Corporation 2014.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of IBM Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2016 Intel Corporation
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
# RTE_EXEC_ENV values are the directories in mk/exec-env/
CONFIG_RTE_EXEC_ENV="linuxapp"
# RTE_ARCH values are architecture we compile for. directories in mk/arch/
CONFIG_RTE_ARCH="ppc_64"
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are architecture we compile for. directories in mk/machine/
CONFIG_RTE_MACHINE="power8"
# The compiler we use.
# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/
CONFIG_RTE_TOOLCHAIN="gcc"
# Use intrinsics or assembly code for key routines
CONFIG_RTE_FORCE_INTRINSICS=n
# Machine forces strict alignment constraints.
CONFIG_RTE_ARCH_STRICT_ALIGN=n
# Compile to share library
CONFIG_RTE_BUILD_SHARED_LIB=y
# Use newest code breaking previous ABI
CONFIG_RTE_NEXT_ABI=n
# Major ABI to overwrite library specific LIBABIVER
CONFIG_RTE_MAJOR_ABI=
# Machine's cache line size
CONFIG_RTE_CACHE_LINE_SIZE=128
# Memory model
CONFIG_RTE_USE_C11_MEM_MODEL=n
# Compile Environment Abstraction Layer
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=256
CONFIG_RTE_MAX_NUMA_NODES=32
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=y
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y
CONFIG_RTE_USE_LIBBSD=n
# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds"
# Compile Environment Abstraction Layer to support Vmware TSC map
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
# Compile architecture we compile for. PCI library
CONFIG_RTE_LIBRTE_PCI=y
# Compile architecture we compile for. argument parser library
CONFIG_RTE_LIBRTE_KVARGS=y
# Compile generic ethernet library
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
# Turn off Tx preparation stage
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
# Common libraries, before Bus/PMDs
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
# Compile architecture we compile for. Intel FPGA bus
CONFIG_RTE_LIBRTE_IFPGA_BUS=n
# Compile PCI bus driver
CONFIG_RTE_LIBRTE_PCI_BUS=y
# Compile architecture we compile for. vdev bus
CONFIG_RTE_LIBRTE_VDEV_BUS=y
# Compile ARK PMD
CONFIG_RTE_LIBRTE_ARK_PMD=n
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
# Compile Aquantia Atlantic PMD driver
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n
# Compile AMD PMD
CONFIG_RTE_LIBRTE_AXGBE_PMD=n
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
# Compile burst-oriented Broadcom PMD driver
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
# Compile burst-oriented Broadcom BNXT PMD driver
CONFIG_RTE_LIBRTE_BNXT_PMD=n
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
CONFIG_RTE_LIBRTE_CXGBE_PMD=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
# Compile NXP DPAA2 FSL-MC Bus
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
# Compile Support Libraries for NXP DPAA2
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
# Compile burst-oriented NXP DPAA2 PMD driver
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
# Compile NXP ENETC PMD Driver
CONFIG_RTE_LIBRTE_ENETC_PMD=n
# Compile burst-oriented Amazon ENA PMD driver
CONFIG_RTE_LIBRTE_ENA_PMD=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
# Compile burst-oriented Cisco ENIC PMD driver
CONFIG_RTE_LIBRTE_ENIC_PMD=n
# Compile burst-oriented IGB & EM PMD drivers
CONFIG_RTE_LIBRTE_EM_PMD=n
CONFIG_RTE_LIBRTE_IGB_PMD=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
# Compile burst-oriented IXGBE PMD driver
CONFIG_RTE_LIBRTE_IXGBE_PMD=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
# Compile burst-oriented I40E PMD driver
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
# Compile burst-oriented FM10K PMD
CONFIG_RTE_LIBRTE_FM10K_PMD=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
# Compile burst-oriented AVF PMD driver
CONFIG_RTE_LIBRTE_AVF_PMD=n
CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
# (MLX5) PMD
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
# Compile burst-oriented Netronome NFP PMD driver
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
CONFIG_RTE_LIBRTE_QEDE_PMD=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of architecture we compile for. firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
# Compile burst-oriented Solarflare libefx-based PMD
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
# Compile software PMD backed by SZEDATA2 device
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
# Compile burst-oriented Cavium LiquidIO PMD driver
CONFIG_RTE_LIBRTE_LIO_PMD=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
# Compile burst-oriented Cavium OCTEONTX network PMD driver
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n
# Compile WRS accelerated virtual port (AVP) guest PMD driver
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
# Compile burst-oriented VIRTIO PMD driver
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
# Compile virtio device emulation inside virtio PMD driver
CONFIG_RTE_VIRTIO_USER=n
# Compile burst-oriented VMXNET3 PMD driver
CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
# Compile software PMD backed by AF_PACKET sockets (Linux only)
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
# Compile link bonding PMD library
CONFIG_RTE_LIBRTE_PMD_BOND=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
# Compile fail-safe PMD
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
# Compile Marvell PMD driver
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
# Compile Marvell MVNETA PMD driver
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
# Compile support for VMBus library
CONFIG_RTE_LIBRTE_VMBUS=n
# Compile native PMD for Hyper-V/Azure
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
# Compile virtual device driver for NetVSC on Hyper-V/Azure
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
# Compile null PMD
CONFIG_RTE_LIBRTE_PMD_NULL=n
# Compile software PMD backed by PCAP files
CONFIG_RTE_LIBRTE_PMD_PCAP=n
# Compile example software rings based PMD
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
# Compile SOFTNIC PMD
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
# Compile architecture we compile for. TAP PMD
# It is enabled by default for Linux only.
CONFIG_RTE_LIBRTE_PMD_TAP=y
# Do prefetch of packet data within PMD driver receive function
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
CONFIG_RTE_LIBRTE_BBDEV=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=n
# Compile PMD for NULL bbdev device
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
# Compile PMD for turbo software bbdev device
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
# Compile generic crypto device library
CONFIG_RTE_LIBRTE_CRYPTODEV=n
CONFIG_RTE_CRYPTO_MAX_DEVS=64
# Compile PMD for ARMv8 Crypto device
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
# Compile NXP CAAM JR crypto Driver
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
# Compile NXP DPAA2 crypto sec driver for CAAM HW
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
# NXP DPAA caam - crypto driver
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
# Compile PMD for Cavium OCTEON TX crypto device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
# Compile PMD for QuickAssist based devices - see docs for details
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
# Max. number of QuickAssist devices, which can be detected and attached
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
# Compile PMD for virtio crypto devices
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n
# Number of maximum virtio crypto devices
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
# Compile PMD for AESNI backed device
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
# Compile PMD for Software backed device
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
# Compile PMD for AESNI GCM device
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
# Compile PMD for SNOW 3G device
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
# Compile PMD for KASUMI device
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
# Compile PMD for ZUC device
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n
# Compile PMD for NULL Crypto device
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n
# Compile PMD for AMD CCP crypto device
CONFIG_RTE_LIBRTE_PMD_CCP=n
# Compile PMD for Marvell Crypto device
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
# Compile generic security library
CONFIG_RTE_LIBRTE_SECURITY=n
# Compile generic compression device library
CONFIG_RTE_LIBRTE_COMPRESSDEV=n
CONFIG_RTE_COMPRESS_MAX_DEVS=64
# Compile compressdev unit test
CONFIG_RTE_COMPRESSDEV_TEST=n
# Compile PMD for Octeontx ZIPVF compression device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n
# Compile PMD for ISA-L compression device
CONFIG_RTE_LIBRTE_PMD_ISAL=n
# Compile PMD for ZLIB compression device
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
# Compile generic event device library
CONFIG_RTE_LIBRTE_EVENTDEV=n
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
# Compile PMD for skeleton event device
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
# Compile PMD for software event device
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n
# Compile PMD for distributed software event device
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n
# Compile PMD for octeontx sso event device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n
# Compile PMD for OPDL event device
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n
# Compile PMD for NXP DPAA event device
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
# Compile PMD for NXP DPAA2 event device
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
CONFIG_RTE_LIBRTE_RAWDEV=n
CONFIG_RTE_RAWDEV_MAX_DEVS=10
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n
# Compile PMD for NXP DPAA2 CMDIF raw device
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
# Compile PMD for NXP DPAA2 QDMA raw device
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
# Compile PMD for Intel FPGA raw device
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
# Compile librte_ring
CONFIG_RTE_LIBRTE_RING=y
# Compile librte_mempool
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
# Compile Mempool drivers
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
# Compile PMD for octeontx fpa mempool device
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n
# Compile librte_mbuf
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
# Compile librte_timer
CONFIG_RTE_LIBRTE_TIMER=n
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
# Compile librte_cfgfile
CONFIG_RTE_LIBRTE_CFGFILE=n
# Compile librte_cmdline
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
# Compile librte_hash
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
# Compile librte_efd
CONFIG_RTE_LIBRTE_EFD=n
# Compile librte_member
CONFIG_RTE_LIBRTE_MEMBER=y
# Compile librte_jobstats
CONFIG_RTE_LIBRTE_JOBSTATS=n
# Compile architecture we compile for. device metrics library
CONFIG_RTE_LIBRTE_METRICS=y
# Compile architecture we compile for. bitrate statistics library
CONFIG_RTE_LIBRTE_BITRATE=y
# Compile architecture we compile for. latency statistics library
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
# Compile librte_telemetry
CONFIG_RTE_LIBRTE_TELEMETRY=n
# Compile librte_lpm
CONFIG_RTE_LIBRTE_LPM=n
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
# Compile librte_acl
CONFIG_RTE_LIBRTE_ACL=n
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
# Compile librte_power
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
# Compile librte_net
CONFIG_RTE_LIBRTE_NET=y
# Compile librte_ip_frag
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
# Compile GRO library
CONFIG_RTE_LIBRTE_GRO=y
# Compile GSO library
CONFIG_RTE_LIBRTE_GSO=y
# Compile librte_meter
CONFIG_RTE_LIBRTE_METER=y
# Compile librte_classify
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n
# Compile librte_sched
CONFIG_RTE_LIBRTE_SCHED=n
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
# Compile architecture we compile for. distributor library
CONFIG_RTE_LIBRTE_DISTRIBUTOR=n
# Compile architecture we compile for. reorder library
CONFIG_RTE_LIBRTE_REORDER=n
# Compile librte_port
CONFIG_RTE_LIBRTE_PORT=n
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
# Compile librte_table
CONFIG_RTE_LIBRTE_TABLE=n
CONFIG_RTE_TABLE_STATS_COLLECT=n
# Compile librte_pipeline
CONFIG_RTE_LIBRTE_PIPELINE=n
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
# Compile librte_kni
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_KMOD_ETHTOOL=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
# Compile architecture we compile for. pdump library
CONFIG_RTE_LIBRTE_PDUMP=y
# Compile vhost user library
CONFIG_RTE_LIBRTE_VHOST=y
CONFIG_RTE_LIBRTE_VHOST_NUMA=y
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
CONFIG_RTE_LIBRTE_PMD_VHOST=y
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
CONFIG_RTE_LIBRTE_IFC_PMD=n
# Compile librte_bpf
CONFIG_RTE_LIBRTE_BPF=n
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
# Compile architecture we compile for. test application
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
# Compile architecture we compile for. procinfo application
CONFIG_RTE_PROC_INFO=y
# Compile architecture we compile for. PMD test application
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
# Compile architecture we compile for. bbdev test application
CONFIG_RTE_TEST_BBDEV=n
# Compile architecture we compile for. crypto performance application
CONFIG_RTE_APP_CRYPTO_PERF=n
# Compile architecture we compile for. eventdev application
CONFIG_RTE_APP_EVENTDEV=n
CONFIG_RTE_EXEC_ENV_LINUXAPP=y
CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n
# Common libraries, before Bus/PMDs
# NXP DPAA BUS and drivers
# NXP FSLMC BUS and DPAA2 drivers
# NXP ENETC PMD Driver
CONFIG_RTE_ARCH_PPC_64=y
CONFIG_RTE_ARCH_64=y
CONFIG_RTE_TOOLCHAIN_GCC=y
# Note: Power doesn't have this support
# Note: Initially, all of architecture we compile for. PMD drivers compilation are turned off on Power
# Will turn on them only after architecture we compile for. successful testing on Power
CONFIG_RTE_LIBRTE_PMD_XENVIRT=n

48
SOURCES/set_config.sh Executable file
View File

@ -0,0 +1,48 @@
#!/bin/bash
# Copyright (C) 2017, Red Hat, Inc.
#
# set_config.sh will copy a configuration from $1 to $2, in the process
# checking that the sha header for $1 matches the header in $2
source configlib.sh
if (( $# < 2 )); then
echo "$0: source dest [comment-marker]"
exit 1
fi
if [ ! -f "$1" ]; then
echo "Source file $1 must exist."
exit 1
fi
src_file=$1
shift
if [ ! -f "$1" ]; then
echo "Dest file $1 must exist."
exit 1
fi
dst_file=$1
shift
comment_sep=${1:-#}
export LANG=en_US.utf8
DEST_FILE_SHA=""
SRC_FILE_SHA=""
calc_sha DEST_FILE_SHA "$dst_file" "$comment_sep" || echo "Failed to calc sha"
retr_sha SRC_FILE_SHA "$src_file" "$comment_sep" || echo "Failed to retrieve sha"
if [ "$DEST_FILE_SHA" != "$SRC_FILE_SHA" ]; then
echo "ERROR: The requisite starting sha from $dst_file does not match the"
echo " specified sha in $src_file."
echo "[ $DEST_FILE_SHA ] vs [ $SRC_FILE_SHA ]"
exit 1
fi
mv "$dst_file" "$dst_file".OLD
cp "$src_file" "$dst_file"
echo "copied 1 config file."
exit 0

View File

@ -0,0 +1,525 @@
# -*- cfg-sha: 2ba93102021dc5d38494cf5090c3ecaca37db13153dd558b1511a56f2a3d9b10
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2016 Intel Corporation
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
# RTE_EXEC_ENV values are the directories in mk/exec-env/
CONFIG_RTE_EXEC_ENV="linuxapp"
# RTE_ARCH values are architecture we compile for. directories in mk/arch/
CONFIG_RTE_ARCH="x86_64"
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are architecture we compile for. directories in mk/machine/
CONFIG_RTE_MACHINE="default"
# The compiler we use.
# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/
CONFIG_RTE_TOOLCHAIN="gcc"
# Use intrinsics or assembly code for key routines
CONFIG_RTE_FORCE_INTRINSICS=n
# Machine forces strict alignment constraints.
CONFIG_RTE_ARCH_STRICT_ALIGN=n
# Compile to share library
CONFIG_RTE_BUILD_SHARED_LIB=y
# Use newest code breaking previous ABI
CONFIG_RTE_NEXT_ABI=n
# Major ABI to overwrite library specific LIBABIVER
CONFIG_RTE_MAJOR_ABI=
# Machine's cache line size
CONFIG_RTE_CACHE_LINE_SIZE=64
# Memory model
CONFIG_RTE_USE_C11_MEM_MODEL=n
# Compile Environment Abstraction Layer
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=y
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y
CONFIG_RTE_USE_LIBBSD=n
# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds"
# Compile Environment Abstraction Layer to support Vmware TSC map
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
# Compile architecture we compile for. PCI library
CONFIG_RTE_LIBRTE_PCI=y
# Compile architecture we compile for. argument parser library
CONFIG_RTE_LIBRTE_KVARGS=y
# Compile generic ethernet library
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
# Turn off Tx preparation stage
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
# Common libraries, before Bus/PMDs
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
# Compile architecture we compile for. Intel FPGA bus
CONFIG_RTE_LIBRTE_IFPGA_BUS=n
# Compile PCI bus driver
CONFIG_RTE_LIBRTE_PCI_BUS=y
# Compile architecture we compile for. vdev bus
CONFIG_RTE_LIBRTE_VDEV_BUS=y
# Compile ARK PMD
CONFIG_RTE_LIBRTE_ARK_PMD=n
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
# Compile Aquantia Atlantic PMD driver
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n
# Compile AMD PMD
CONFIG_RTE_LIBRTE_AXGBE_PMD=n
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
# Compile burst-oriented Broadcom PMD driver
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
# Compile burst-oriented Broadcom BNXT PMD driver
CONFIG_RTE_LIBRTE_BNXT_PMD=y
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
CONFIG_RTE_LIBRTE_CXGBE_PMD=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
# Compile NXP DPAA2 FSL-MC Bus
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
# Compile Support Libraries for NXP DPAA2
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
# Compile burst-oriented NXP DPAA2 PMD driver
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
# Compile NXP ENETC PMD Driver
CONFIG_RTE_LIBRTE_ENETC_PMD=n
# Compile burst-oriented Amazon ENA PMD driver
CONFIG_RTE_LIBRTE_ENA_PMD=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
# Compile burst-oriented Cisco ENIC PMD driver
CONFIG_RTE_LIBRTE_ENIC_PMD=y
# Compile burst-oriented IGB & EM PMD drivers
CONFIG_RTE_LIBRTE_EM_PMD=n
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
# Compile burst-oriented IXGBE PMD driver
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
# Compile burst-oriented I40E PMD driver
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
# Compile burst-oriented FM10K PMD
CONFIG_RTE_LIBRTE_FM10K_PMD=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
# Compile burst-oriented AVF PMD driver
CONFIG_RTE_LIBRTE_AVF_PMD=n
CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
CONFIG_RTE_LIBRTE_MLX4_PMD=y
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=y
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
# (MLX5) PMD
CONFIG_RTE_LIBRTE_MLX5_PMD=y
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=y
# Compile burst-oriented Netronome NFP PMD driver
CONFIG_RTE_LIBRTE_NFP_PMD=y
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of architecture we compile for. firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
# Compile burst-oriented Solarflare libefx-based PMD
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
# Compile software PMD backed by SZEDATA2 device
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
# Compile burst-oriented Cavium LiquidIO PMD driver
CONFIG_RTE_LIBRTE_LIO_PMD=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
# Compile burst-oriented Cavium OCTEONTX network PMD driver
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n
# Compile WRS accelerated virtual port (AVP) guest PMD driver
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
# Compile burst-oriented VIRTIO PMD driver
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
# Compile virtio device emulation inside virtio PMD driver
CONFIG_RTE_VIRTIO_USER=n
# Compile burst-oriented VMXNET3 PMD driver
CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
# Compile software PMD backed by AF_PACKET sockets (Linux only)
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
# Compile link bonding PMD library
CONFIG_RTE_LIBRTE_PMD_BOND=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
# Compile fail-safe PMD
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
# Compile Marvell PMD driver
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
# Compile Marvell MVNETA PMD driver
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
# Compile support for VMBus library
CONFIG_RTE_LIBRTE_VMBUS=y
# Compile native PMD for Hyper-V/Azure
CONFIG_RTE_LIBRTE_NETVSC_PMD=y
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
# Compile virtual device driver for NetVSC on Hyper-V/Azure
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=y
# Compile null PMD
CONFIG_RTE_LIBRTE_PMD_NULL=n
# Compile software PMD backed by PCAP files
CONFIG_RTE_LIBRTE_PMD_PCAP=n
# Compile example software rings based PMD
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
# Compile SOFTNIC PMD
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
# Compile architecture we compile for. TAP PMD
# It is enabled by default for Linux only.
CONFIG_RTE_LIBRTE_PMD_TAP=y
# Do prefetch of packet data within PMD driver receive function
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
CONFIG_RTE_LIBRTE_BBDEV=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=n
# Compile PMD for NULL bbdev device
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
# Compile PMD for turbo software bbdev device
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
# Compile generic crypto device library
CONFIG_RTE_LIBRTE_CRYPTODEV=n
CONFIG_RTE_CRYPTO_MAX_DEVS=64
# Compile PMD for ARMv8 Crypto device
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
# Compile NXP CAAM JR crypto Driver
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
# Compile NXP DPAA2 crypto sec driver for CAAM HW
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
# NXP DPAA caam - crypto driver
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
# Compile PMD for Cavium OCTEON TX crypto device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
# Compile PMD for QuickAssist based devices - see docs for details
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
# Max. number of QuickAssist devices, which can be detected and attached
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
# Compile PMD for virtio crypto devices
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n
# Number of maximum virtio crypto devices
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
# Compile PMD for AESNI backed device
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
# Compile PMD for Software backed device
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
# Compile PMD for AESNI GCM device
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
# Compile PMD for SNOW 3G device
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
# Compile PMD for KASUMI device
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
# Compile PMD for ZUC device
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n
# Compile PMD for NULL Crypto device
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n
# Compile PMD for AMD CCP crypto device
CONFIG_RTE_LIBRTE_PMD_CCP=n
# Compile PMD for Marvell Crypto device
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
# Compile generic security library
CONFIG_RTE_LIBRTE_SECURITY=n
# Compile generic compression device library
CONFIG_RTE_LIBRTE_COMPRESSDEV=n
CONFIG_RTE_COMPRESS_MAX_DEVS=64
# Compile compressdev unit test
CONFIG_RTE_COMPRESSDEV_TEST=n
# Compile PMD for Octeontx ZIPVF compression device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n
# Compile PMD for ISA-L compression device
CONFIG_RTE_LIBRTE_PMD_ISAL=n
# Compile PMD for ZLIB compression device
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
# Compile generic event device library
CONFIG_RTE_LIBRTE_EVENTDEV=n
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
# Compile PMD for skeleton event device
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
# Compile PMD for software event device
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n
# Compile PMD for distributed software event device
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n
# Compile PMD for octeontx sso event device
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n
# Compile PMD for OPDL event device
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n
# Compile PMD for NXP DPAA event device
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
# Compile PMD for NXP DPAA2 event device
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
CONFIG_RTE_LIBRTE_RAWDEV=n
CONFIG_RTE_RAWDEV_MAX_DEVS=10
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n
# Compile PMD for NXP DPAA2 CMDIF raw device
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
# Compile PMD for NXP DPAA2 QDMA raw device
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
# Compile PMD for Intel FPGA raw device
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
# Compile librte_ring
CONFIG_RTE_LIBRTE_RING=y
# Compile librte_mempool
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
# Compile Mempool drivers
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
# Compile PMD for octeontx fpa mempool device
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n
# Compile librte_mbuf
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
# Compile librte_timer
CONFIG_RTE_LIBRTE_TIMER=n
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
# Compile librte_cfgfile
CONFIG_RTE_LIBRTE_CFGFILE=n
# Compile librte_cmdline
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
# Compile librte_hash
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
# Compile librte_efd
CONFIG_RTE_LIBRTE_EFD=n
# Compile librte_member
CONFIG_RTE_LIBRTE_MEMBER=y
# Compile librte_jobstats
CONFIG_RTE_LIBRTE_JOBSTATS=n
# Compile architecture we compile for. device metrics library
CONFIG_RTE_LIBRTE_METRICS=y
# Compile architecture we compile for. bitrate statistics library
CONFIG_RTE_LIBRTE_BITRATE=y
# Compile architecture we compile for. latency statistics library
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
# Compile librte_telemetry
CONFIG_RTE_LIBRTE_TELEMETRY=n
# Compile librte_lpm
CONFIG_RTE_LIBRTE_LPM=n
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
# Compile librte_acl
CONFIG_RTE_LIBRTE_ACL=n
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
# Compile librte_power
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
# Compile librte_net
CONFIG_RTE_LIBRTE_NET=y
# Compile librte_ip_frag
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
# Compile GRO library
CONFIG_RTE_LIBRTE_GRO=y
# Compile GSO library
CONFIG_RTE_LIBRTE_GSO=y
# Compile librte_meter
CONFIG_RTE_LIBRTE_METER=y
# Compile librte_classify
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n
# Compile librte_sched
CONFIG_RTE_LIBRTE_SCHED=n
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
# Compile architecture we compile for. distributor library
CONFIG_RTE_LIBRTE_DISTRIBUTOR=n
# Compile architecture we compile for. reorder library
CONFIG_RTE_LIBRTE_REORDER=n
# Compile librte_port
CONFIG_RTE_LIBRTE_PORT=n
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
# Compile librte_table
CONFIG_RTE_LIBRTE_TABLE=n
CONFIG_RTE_TABLE_STATS_COLLECT=n
# Compile librte_pipeline
CONFIG_RTE_LIBRTE_PIPELINE=n
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
# Compile librte_kni
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_KMOD_ETHTOOL=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
# Compile architecture we compile for. pdump library
CONFIG_RTE_LIBRTE_PDUMP=y
# Compile vhost user library
CONFIG_RTE_LIBRTE_VHOST=y
CONFIG_RTE_LIBRTE_VHOST_NUMA=y
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
CONFIG_RTE_LIBRTE_PMD_VHOST=y
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
CONFIG_RTE_LIBRTE_IFC_PMD=n
# Compile librte_bpf
CONFIG_RTE_LIBRTE_BPF=n
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
# Compile architecture we compile for. test application
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
# Compile architecture we compile for. procinfo application
CONFIG_RTE_PROC_INFO=y
# Compile architecture we compile for. PMD test application
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
# Compile architecture we compile for. bbdev test application
CONFIG_RTE_TEST_BBDEV=n
# Compile architecture we compile for. crypto performance application
CONFIG_RTE_APP_CRYPTO_PERF=n
# Compile architecture we compile for. eventdev application
CONFIG_RTE_APP_EVENTDEV=n
CONFIG_RTE_EXEC_ENV_LINUXAPP=y
CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n
# Common libraries, before Bus/PMDs
# NXP DPAA BUS and drivers
# NXP FSLMC BUS and DPAA2 drivers
# NXP ENETC PMD Driver
CONFIG_RTE_ARCH_X86_64=y
CONFIG_RTE_ARCH_X86=y
CONFIG_RTE_ARCH_64=y
CONFIG_RTE_TOOLCHAIN_GCC=y
CONFIG_RTE_LIBRTE_PMD_XENVIRT=n

655
SPECS/dpdk.spec Normal file
View File

@ -0,0 +1,655 @@
# Add option to build with examples
%bcond_with examples
# Add option to build without tools
%bcond_without tools
# Dont edit Version: and Release: directly, only these:
#% define commit0 0da7f445df445630c794897347ee360d6fe6348b
#% define date 20181127
#% define shortcommit0 %(c=%{commit0}; echo ${c:0:7})
%define ver 18.11
%define rel 3
%define srcname dpdk
Name: dpdk
Version: %{ver}
Release: %{rel}%{?commit0:.%{date}git%{shortcommit0}}%{?dist}
URL: http://dpdk.org
%if 0%{?commit0:1}
Source: http://dpdk.org/browse/dpdk/snapshot/dpdk-%{commit0}.tar.xz
%else
Source: http://fast.dpdk.org/rel/dpdk-%{ver}.tar.xz
%endif
# Only needed for creating snapshot tarballs, not used in build itself
Source100: dpdk-snapshot.sh
Source500: configlib.sh
Source501: gen_config_group.sh
Source502: set_config.sh
# Important: source503 is used as the actual copy file
# @TODO: this causes a warning - fix it?
Source504: arm64-armv8a-linuxapp-gcc-config
Source505: ppc_64-power8-linuxapp-gcc-config
Source506: x86_64-native-linuxapp-gcc-config
# Patches only in dpdk package
Patch0: 0001-bus-vmbus-fix-race-in-subchannel-creation.patch
Patch1: 0002-net-netvsc-enable-SR-IOV.patch
Patch2: 0003-net-netvsc-disable-multi-queue-on-older-servers.patch
Summary: Set of libraries and drivers for fast packet processing
#
# Note that, while this is dual licensed, all code that is included with this
# Pakcage are BSD licensed. The only files that aren't licensed via BSD is the
# kni kernel module which is dual LGPLv2/BSD, and thats not built for fedora.
#
License: BSD and LGPLv2 and GPLv2
#
# The DPDK is designed to optimize througput of network traffic using, among
# other techniques, carefully crafted assembly instructions. As such it
# needs extensive work to port it to other architectures.
ExclusiveArch: x86_64 aarch64 ppc64le
# machine_arch maps between rpm and dpdk arch name, often same as _target_cpu
# machine_tmpl is the config template machine name, often "native"
# machine is the actual machine name used in the dpdk make system
%ifarch x86_64
%define machine_arch x86_64
%define machine_tmpl native
%define machine default
%endif
%ifarch aarch64
%define machine_arch arm64
%define machine_tmpl armv8a
%define machine armv8a
%endif
%ifarch ppc64le
%define machine_arch ppc_64
%define machine_tmpl power8
%define machine power8
%endif
%define target %{machine_arch}-%{machine_tmpl}-linuxapp-gcc
%define sdkdir %{_datadir}/%{name}
%define docdir %{_docdir}/%{name}
%define incdir %{_includedir}/%{name}
%define pmddir %{_libdir}/%{name}-pmds
%if 0%{?rhel} > 7 || 0%{?fedora}
%define _py python3
%define _py_exec %{?__python3}
%else
%define _py python
%define _py_exec %{?__python2}
%endif
%if 0%{?rhel} > 7
# Fix conflicts with README and MAINTAINERS (included in dpdk-doc < 18.11-2)
Conflicts: dpdk-doc < 18.11-2
%endif
BuildRequires: gcc, kernel-headers, zlib-devel, numactl-devel
BuildRequires: doxygen, %{_py}-devel, %{_py}-sphinx
%ifarch x86_64
BuildRequires: rdma-core-devel >= 15 libmnl-devel
%global __requires_exclude_from ^%{_libdir}/librte_pmd_mlx[45]_glue\.so.*$
%endif
%description
The Data Plane Development Kit is a set of libraries and drivers for
fast packet processing in the user space.
%package devel
Summary: Data Plane Development Kit development files
Requires: %{name}%{?_isa} = %{version}-%{release}
%description devel
This package contains the headers and other files needed for developing
applications with the Data Plane Development Kit.
%package doc
Summary: Data Plane Development Kit API documentation
BuildArch: noarch
%description doc
API programming documentation for the Data Plane Development Kit.
%if %{with tools}
%package tools
Summary: Tools for setting up Data Plane Development Kit environment
Requires: %{name} = %{version}-%{release}
Requires: kmod pciutils findutils iproute %{_py_exec}
%description tools
%{summary}
%endif
%if %{with examples}
%package examples
Summary: Data Plane Development Kit example applications
BuildRequires: libvirt-devel
%description examples
Example applications utilizing the Data Plane Development Kit, such
as L2 and L3 forwarding.
%endif
%prep
%autosetup -n %{srcname}-%{?commit0:%{commit0}}%{!?commit0:%{ver}} -p1
%build
# In case dpdk-devel is installed
unset RTE_SDK RTE_INCLUDE RTE_TARGET
# Avoid appending second -Wall to everything, it breaks upstream warning
# disablers in makefiles. Strip expclit -march= from optflags since they
# will only guarantee build failures, DPDK is picky with that.
export EXTRA_CFLAGS="$(echo %{optflags} | sed -e 's:-Wall::g' -e 's:-march=[[:alnum:]]* ::g') -Wformat -fPIC"
# DPDK defaults to using builder-specific compiler flags. However,
# the config has been changed by specifying CONFIG_RTE_MACHINE=default
# in order to build for a more generic host. NOTE: It is possible that
# the compiler flags used still won't work for all Fedora-supported
# machines, but runtime checks in DPDK will catch those situations.
make V=1 O=%{target} T=%{target} %{?_smp_mflags} config
cp -f %{SOURCE500} %{SOURCE502} "%{_sourcedir}/%{target}-config" .
%{SOURCE502} %{target}-config "%{target}/.config"
make V=1 O=%{target} %{?_smp_mflags}
# Creating PDF's has excessive build-requirements, html docs suffice fine
make V=1 O=%{target} %{?_smp_mflags} doc-api-html doc-guides-html
%if %{with examples}
make V=1 O=%{target}/examples T=%{target} %{?_smp_mflags} examples
%endif
%install
# In case dpdk-devel is installed
unset RTE_SDK RTE_INCLUDE RTE_TARGET
%make_install O=%{target} prefix=%{_usr} libdir=%{_libdir}
# Replace /usr/bin/env python with the correct python binary
find %{buildroot}%{sdkdir}/ -name "*.py" -exec \
sed -i -e 's|#!\s*/usr/bin/env python|#!%{_py_exec}|' {} +
# Create a driver directory with symlinks to all pmds
mkdir -p %{buildroot}/%{pmddir}
for f in %{buildroot}/%{_libdir}/*_pmd_*.so.*; do
bn=$(basename ${f})
%ifarch x86_64
case $bn in
librte_pmd_mlx[45]_glue.so.*)
mkdir -p %{buildroot}/%{pmddir}-glue
ln -s ../${bn} %{buildroot}%{pmddir}-glue/${bn}
continue
;;
esac
%endif
ln -s ../${bn} %{buildroot}%{pmddir}/${bn}
done
%if ! %{with tools}
rm -rf %{buildroot}%{sdkdir}/usertools
rm -rf %{buildroot}%{_sbindir}/dpdk-devbind
%endif
rm -f %{buildroot}%{sdkdir}/usertools/dpdk-setup.sh
rm -f %{buildroot}%{sdkdir}/usertools/meson.build
rm -f %{buildroot}%{_bindir}/dpdk-pmdinfo
rm -f %{buildroot}%{_bindir}/dpdk-test-crypto-perf
rm -f %{buildroot}%{_bindir}/dpdk-test-eventdev
%if %{with examples}
find %{target}/examples/ -name "*.map" | xargs rm -f
for f in %{target}/examples/*/%{target}/app/*; do
bn=`basename ${f}`
cp -p ${f} %{buildroot}%{_bindir}/dpdk-${bn}
done
%else
rm -rf %{buildroot}%{sdkdir}/examples
%endif
# Setup RTE_SDK environment as expected by apps etc
mkdir -p %{buildroot}/%{_sysconfdir}/profile.d
cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh
if [ -z "\${RTE_SDK}" ]; then
export RTE_SDK="%{sdkdir}"
export RTE_TARGET="%{target}"
export RTE_INCLUDE="%{incdir}"
fi
EOF
cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.csh
if ( ! \$RTE_SDK ) then
setenv RTE_SDK "%{sdkdir}"
setenv RTE_TARGET "%{target}"
setenv RTE_INCLUDE "%{incdir}"
endif
EOF
# Fixup target machine mismatch
sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk*
%files
# BSD
%doc README MAINTAINERS
%{_bindir}/testpmd
%{_bindir}/dpdk-procinfo
%{_bindir}/dpdk-pdump
%dir %{pmddir}
%{_libdir}/*.so.*
%{pmddir}/*.so.*
%ifarch x86_64
%dir %{pmddir}-glue
%{pmddir}-glue/*.so.*
%endif
%files doc
#BSD
%exclude %{docdir}/README
%exclude %{docdir}/MAINTAINERS
%{docdir}
%files devel
#BSD
%{incdir}/
%{sdkdir}/
%if %{with tools}
%exclude %{sdkdir}/usertools/
%endif
%if %{with examples}
%exclude %{sdkdir}/examples/
%endif
%{_sysconfdir}/profile.d/dpdk-sdk-*.*
%{_libdir}/*.so
%if %{with examples}
%files examples
%exclude %{_bindir}/dpdk-procinfo
%exclude %{_bindir}/dpdk-pdump
%{_bindir}/dpdk-*
%doc %{sdkdir}/examples/
%endif
%if %{with tools}
%files tools
%{sdkdir}/usertools/
%{_sbindir}/dpdk-devbind
%endif
%changelog
* Mon Feb 18 2019 Maxime Coquelin <maxime.coquelin@redhat.com> - 18.11.3
- Backport NETVSC pmd fixes (#1676534)
* Tue Nov 27 2018 Timothy Redaelli <tredaelli@redhat.com> - 18.11-2
- Remove meson.build from dpdk-tools
- Don't install README and MAINTAINERS in dpdk-doc
* Tue Nov 27 2018 Timothy Redaelli <tredaelli@redhat.com> - 18.11-1
- Updated to DPDK 18.11 (#1492326):
- Updated configs
- Added libmnl-devel BuildRequires for Mellanox
* Thu Sep 20 2018 Tomas Orsava <torsava@redhat.com> - 17.11-14
- Require the Python interpreter directly instead of using the package name
- Related: rhbz#1619153
* Mon Sep 10 2018 Timothy Redaelli <tredaelli@redhat.com> - 17.11-13
- Backport "net/mlx{4,5}: Avoid stripping the glue library" (#1609659)
* Fri Jul 20 2018 Timothy Redaelli <tredaelli@redhat.com> - 17.11-12
- Use python3 packages on RHEL8 and Fedora
- Remove dpdk-pmdinfo (#1494462)
- Backport "net/mlx5: fix build with rdma-core v19"
* Thu Jun 14 2018 Timothy Redaelli <tredaelli@redhat.com> - 17.11-11
- Re-align with DPDK patches inside OVS FDP 18.06 (#1591198)
* Mon Jun 11 2018 Aaron Conole <aconole@redhat.com> - 17.11-10
- Fix mlx5 memory region boundary checks (#1581230)
* Thu Jun 07 2018 Timothy Redaelli <tredaelli@redhat.com> - 17.11-9
- Add 2 missing QEDE patches
- Fix previous changelog date
* Thu Jun 07 2018 Timothy Redaelli <tredaelli@redhat.com> - 17.11-8
- Align with DPDK patches inside OVS FDP 18.06
- Enable BNXT, MLX4, MLX5, NFP and QEDE PMDs
- Backport "net/mlx: fix rdma-core glue path with EAL plugins" (only needed on
DPDK package)
* Wed Jan 31 2018 Kevin Traynor <ktraynor@redhat.com> - 17.11-7
- Backport to forbid IOVA mode if IOMMU address width too small (#1530957)
* Wed Jan 31 2018 Aaron Conole <aconole@redhat.com> - 17.11-6
- Backport to protect active vhost_user rings (#1525446)
* Tue Jan 09 2018 Timothy Redaelli <tredaelli@redhat.com> - 17.11-5
- Real backport of "net/virtio: fix vector Rx break caused by rxq flushing"
* Thu Dec 14 2017 Timothy Redaelli <tredaelli@redhat.com> - 17.11-4
- Backport "net/virtio: fix vector Rx break caused by rxq flushing"
* Wed Dec 06 2017 Timothy Redaelli <tredaelli@redhat.com> - 17.11-3
- Enable ENIC only for x86_64
* Wed Dec 06 2017 Timothy Redaelli <tredaelli@redhat.com> - 17.11-2
- Re-add main package dependency from dpdk-tools
- Add explicit python dependency to dpdk-tools
* Tue Nov 28 2017 Timothy Redaelli <tredaelli@redhat.com> - 17.11-1
- Update to DPDK 17.11 (#1522700)
- Use a static configuration file
- Remove i686 from ExclusiveArch since it's not supported on RHEL7
- Remove "--without shared" support
* Fri Oct 13 2017 Josh Boyer <jwboyer@redhat.com> - 16.11.2-6
- Rebuild to pick up all arches
* Fri Oct 13 2017 Timothy Redaelli <tredaelli@redhat.com> - 16.11.2-5
- Enable only supported PMDs (#1497384)
* Fri Jun 23 2017 John W. Linville <linville@redhat.com> - 16.11.2-4
- Backport "eal/ppc: fix mmap for memory initialization"
* Fri Jun 09 2017 John W. Linville <linville@redhat.com> - 16.11.2-3
- Enable i40e driver in PowerPC along with its altivec intrinsic support
- Add PCI probing support for vfio-pci devices in Power8
* Thu Jun 08 2017 John W. Linville <linville@redhat.com> - 16.11.2-2
- Enable aarch64, ppc64le (#1428587)
* Thu Jun 08 2017 Timothy Redaelli <tredaelli@redhat.com> - 16.11.2-1
- Import from fdProd
- Update to 16.11.2 (#1459333)
* Wed Mar 22 2017 Timothy Redaelli <tredaelli@redhat.com> - 16.11-4
- Avoid infinite loop while linking with libdpdk.so (#1434907)
* Thu Feb 02 2017 Timothy Redaelli <tredaelli@redhat.com> - 16.11-3
- Make driverctl a different package
* Thu Dec 08 2016 Kevin Traynor <ktraynor@redhat.com> - 16.11-2
- Update to DPDK 16.11 (#1335865)
* Wed Oct 05 2016 Panu Matilainen <pmatilai@redhat.com> - 16.07-1
- Update to DPDK 16.07 (#1383195)
- Disable unstable bnx2x driver (#1330589)
- Enable librte_vhost NUMA support again (#1279525)
- Enable librte_cryptodev, its no longer considered experimental
- Change example prefix to dpdk- for consistency with other utilities
- Update driverctl to 0.89
* Thu Jul 21 2016 Flavio Leitner <fbl@redhat.com> - 16.04-4
- Updated to DPDK 16.04
* Wed Mar 16 2016 Panu Matilainen <pmatilai@redhat.com> - 2.2.0-3
- Disable librte_vhost NUMA support for now, it causes segfaults
* Wed Jan 27 2016 Panu Matilainen <pmatilai@redhat.com> - 2.2.0-2
- Use a different quoting method to avoid messing up vim syntax highlighting
- A string is expected as CONFIG_RTE_MACHINE value, quote it too
- Enable librte_vhost NUMA-awareness
* Tue Jan 12 2016 Panu Matilainen <pmatilai@redhat.com> - 2.2.0-1
- Update DPDK to 2.2.0 final
- Add README and MAINTAINERS docs
- Adopt new upstream standard installation layout, including
dpdk_nic_bind.py renamed to dpdk_nic_bind
- Move the unversioned pmd symlinks from libdir -devel
- Establish a driver directory for automatic driver loading
- Disable CONFIG_RTE_SCHED_VECTOR, it conflicts with CONFIG_RTE_MACHINE default
- Disable experimental cryptodev library
- More complete dtneeded patch
- Make option matching stricter in spec setconf
- Update driverctl to 0.59
* Wed Dec 09 2015 Panu Matilainen <pmatilai@redhat.com> - 2.1.0-5
- Fix artifacts from driverctl having different version
- Update driverctl to 0.58
* Fri Nov 13 2015 Panu Matilainen <pmatilai@redhat.com> - 2.1.0-4
- Add driverctl sub-package
* Fri Oct 23 2015 Panu Matilainen <pmatilai@redhat.com> - 2.1.0-3
- Enable bnx2x pmd, which buildrequires zlib-devel
* Mon Sep 28 2015 Panu Matilainen <pmatilai@redhat.com> - 2.1.0-2
- Make lib and include available both ways in the SDK paths
* Thu Sep 24 2015 Panu Matilainen <pmatilai@redhat.com> - 2.1.0-1
- Update to dpdk 2.1.0 final
- Disable ABI_NEXT
- Rebase patches as necessary
- Fix build of ip_pipeline example
- Drop no longer needed -Wno-error=array-bounds
- Rename libintel_dpdk to libdpdk
* Tue Aug 11 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-9
- Drop main package dependency from dpdk-tools
* Wed May 20 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-8
- Drop eventfd-link patch, its only needed for vhost-cuse
* Tue May 19 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-7
- Drop pointless build conditional, the linker script is here to stay
- Drop vhost-cuse build conditional, vhost-user is here to stay
- Cleanup comments a bit
- Enable parallel build again
- Dont build examples by default
* Thu Apr 30 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-6
- Fix potential hang and thread issues with VFIO eventfd
* Fri Apr 24 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-5
- Fix a potential hang due to missed interrupt in vhost library
* Tue Apr 21 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-4
- Drop unused pre-2.0 era patches
- Handle vhost-user/cuse selection automatically based on the copr repo name
* Fri Apr 17 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-3
- Dont depend on fuse when built for vhost-user support
- Drop version from testpmd binary, we wont be parallel-installing that
* Thu Apr 09 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-2
- Remove the broken kmod stuff
- Add a new dkms-based eventfd_link subpackage if vhost-cuse is enabled
* Tue Apr 07 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-1
- Update to 2.0 final (http://dpdk.org/doc/guides-2.0/rel_notes/index.html)
* Thu Apr 02 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.2086.git263333bb.2
- Switch (back) to vhost-user, thus disabling vhost-cuse support
- Build requires fuse-devel for now even when fuse is unused
* Mon Mar 30 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.2049.git2f95a470.1
- New snapshot
- Add spec option for enabling vhost-user instead of vhost-cuse
- Build requires fuse-devel only with vhost-cuse
- Add virtual provide for vhost user/cuse tracking
* Fri Mar 27 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.2038.git91a8743e.3
- Disable vhost-user for now to get vhost-cuse support, argh.
* Fri Mar 27 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.2038.git91a8743e.2
- Add a bunch of missing dependencies to -tools
* Thu Mar 26 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.2038.git91a8743e.1
- Another day, another snapshot
- Disable IVSHMEM support for now
* Fri Mar 20 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.2022.gitfe4810a0.2
- Dont fail build for array bounds warnings for now, gcc 5 is emitting a bunch
* Fri Mar 20 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.2022.gitfe4810a0.1
- Another day, another snapshot
- Avoid building pdf docs
* Tue Mar 03 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1916.gita001589e.2
- Add missing dependency to tools -subpackage
* Tue Mar 03 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1916.gita001589e.1
- New snapshot
- Work around #1198009
* Mon Mar 02 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1911.gitffc468ff.2
- Optionally package tools too, some binding script is needed for many setups
* Mon Mar 02 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1911.gitffc468ff.1
- New snapshot
- Disable kernel module build by default
- Add patch to fix missing defines/includes for external applications
* Fri Feb 27 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1906.git00c68563.1
- New snapshot
- Remove bogus devname module alias from eventfd-link module
- Whack evenfd-link to honor RTE_KERNELDIR too
* Thu Feb 26 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1903.gitb67578cc.3
- Add spec option to build kernel modules too
- Build eventfd-link module too if kernel modules enabled
* Thu Feb 26 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1903.gitb67578cc.2
- Move config changes from spec after "make config" to simplify things
- Move config changes from dpdk-config patch to the spec
* Thu Feb 19 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1717.gitd3aa5274.2
- Fix warnings tripping up build with gcc 5, remove -Wno-error
* Wed Feb 18 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1698.gitc07691ae.1
- Move the unversioned .so links for plugins into main package
- New snapshot
* Wed Feb 18 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1695.gitc2ce3924.3
- Fix missing symbol export for rte_eal_iopl_init()
- Only mention libs once in the linker script
* Wed Feb 18 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1695.gitc2ce3924.2
- Fix gcc version logic to work with 5.0 too
* Wed Feb 18 2015 Panu Matilainen <pmatilai@redhat.com> - 2.0.0-0.1695.gitc2ce3924.1
- Add spec magic to easily switch between stable and snapshot versions
- Add tarball snapshot script for reference
- Update to pre-2.0 git snapshot
* Thu Feb 12 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-15
- Disable -Werror, this is not useful behavior for released versions
* Wed Feb 11 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-14
- Fix typo causing librte_vhost missing DT_NEEDED on fuse
* Wed Feb 11 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-13
- Fix vhost library linkage
- Add spec option to build example applications, enable by default
* Fri Feb 06 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-12
- Enable librte_acl build
- Enable librte_ivshmem build
* Thu Feb 05 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-11
- Drop the private libdir, not needed with versioned libs
* Thu Feb 05 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-10
- Drop symbol versioning patches, always do library version for shared
- Add comment on the combined library thing
* Wed Feb 04 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-9
- Add missing symbol version to librte_cmdline
* Tue Feb 03 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-8
- Set soname of the shared libraries
- Fixup typo in ld path config file name
* Tue Feb 03 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-7
- Add library versioning patches as another build option, enable by default
* Tue Feb 03 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-6
- Add our libraries to ld path & run ldconfig when using shared libs
* Fri Jan 30 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-5
- Add DT_NEEDED for external dependencies (pcap, fuse, dl, pthread)
- Enable combined library creation, needed for OVS
- Enable shared library creation, needed for sanity
* Thu Jan 29 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-4
- Include scripts directory in the "sdk" too
* Thu Jan 29 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-3
- Fix -Wformat clash preventing i40e driver build, enable it
- Fix -Wall clash preventing enic driver build, enable it
* Thu Jan 29 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-2
- Enable librte_vhost, which buildrequires fuse-devel
- Enable physical NIC drivers that build (e1000, ixgbe) for VFIO use
* Thu Jan 29 2015 Panu Matilainen <pmatilai@redhat.com> - 1.8.0-1
- Update to 1.8.0
* Wed Jan 28 2015 Panu Matilainen <pmatilai@redhat.com> - 1.7.0-8
- Always build with -fPIC
* Wed Jan 28 2015 Panu Matilainen <pmatilai@redhat.com> - 1.7.0-7
- Policy compliance: move static libraries to -devel, provide dpdk-static
- Add a spec option to build as shared libraries
* Wed Jan 28 2015 Panu Matilainen <pmatilai@redhat.com> - 1.7.0-6
- Avoid variable expansion in the spec here-documents during build
- Drop now unnecessary debug flags patch
- Add a spec option to build a combined library
* Tue Jan 27 2015 Panu Matilainen <pmatilai@redhat.com> - 1.7.0-5
- Avoid unnecessary use of %%global, lazy expansion is normally better
- Drop unused destdir macro while at it
- Arrange for RTE_SDK environment + directory layout expected by DPDK apps
- Drop config from main package, it shouldn't be needed at runtime
* Tue Jan 27 2015 Panu Matilainen <pmatilai@redhat.com> - 1.7.0-4
- Copy the headers instead of broken symlinks into -devel package
- Force sane mode on the headers
- Avoid unnecessary %%exclude by not copying unpackaged content to buildroot
- Clean up summaries and descriptions
- Drop unnecessary kernel-devel BR, we are not building kernel modules
* Sat Aug 16 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.7.0-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
* Thu Jul 17 2014 - John W. Linville <linville@redhat.com> - 1.7.0-2
- Use EXTRA_CFLAGS to include standard Fedora compiler flags in build
- Set CONFIG_RTE_MACHINE=default to build for least-common-denominator machines
- Turn-off build of librte_acl, since it does not build on default machines
- Turn-off build of physical device PMDs that require kernel support
- Clean-up the install rules to match current packaging
- Correct changelog versions 1.0.7 -> 1.7.0
- Remove ix86 from ExclusiveArch -- it does not build with above changes
* Thu Jul 10 2014 - Neil Horman <nhorman@tuxdriver.com> - 1.7.0-1.0
- Update source to official 1.7.0 release
* Thu Jul 03 2014 - Neil Horman <nhorman@tuxdriver.com>
- Fixing up release numbering
* Tue Jul 01 2014 - Neil Horman <nhorman@tuxdriver.com> - 1.7.0-0.9.1.20140603git5ebbb1728
- Fixed some build errors (empty debuginfo, bad 32 bit build)
* Wed Jun 11 2014 - Neil Horman <nhorman@tuxdriver.com> - 1.7.0-0.9.20140603git5ebbb1728
- Fix another build dependency
* Mon Jun 09 2014 - Neil Horman <nhorman@tuxdriver.com> - 1.7.0-0.8.20140603git5ebbb1728
- Fixed doc arch versioning issue
* Mon Jun 09 2014 - Neil Horman <nhorman@tuxdriver.com> - 1.7.0-0.7.20140603git5ebbb1728
- Added verbose output to build
* Tue May 13 2014 - Neil Horman <nhorman@tuxdriver.com> - 1.7.0-0.6.20140603git5ebbb1728
- Initial Build