- Enable dhcpv6 support (#480798)

- Fix config file migration in scriptlets (#480543)
- Allow dhclient-script expansion with /etc/dhcp/dhclient.d/*.sh scripts

README.dhclient.d

@@ -0,0 +1,47 @@
+The /etc/dhcp/dhclient.d directory allows other packages and system
+administrators to create application-specific option handlers for dhclient.
+
+When dhclient is run, any option listed in the dhcp-options(5) man page can
+be requested.  dhclient-script does not handle every option available
+because doing so would make the script unmaintainable as the components
+using those options might change over time.  The knowledge of how to handle
+those options should be under the responsibility of the package maintainer
+for that component (e.g., NTP options belong in a handler in the ntp
+package).
+
+To make maintenance easier, application specific DHCP options can be handled
+by creating a script with two functions and placing it in /etc/dhcp/dhclient.d
+
+The script must follow a specific form:
+
+(1) The script must be named NAME.sh.  NAME can be anything, but it makes
+    sense to name it for the service it handles.  e.g., ntp.sh
+
+(2) The script must provide a NAME_config() function to read the options and
+    do whatever it takes to put those options in place.
+
+(3) The script must provide a NAME_restore() function to restore original
+    configuration state when dhclient stops.
+
+(4) The script must be 'chmod +x' or dhclient-script will ignore it.
+
+The scripts execute in the same environment as dhclient-script.  That means
+all of the functions and variables available to it are available to your
+NAME.sh script.  Things of note:
+
+    ${SAVEDIR} is where original configuration files are saved.  Save your
+    original configuration files here before you take the DHCP provided
+    values and generate new files.
+
+    Variables set in /etc/sysconfig/network, /etc/sysconfig/networking/network,
+    and /etc/sysconfig/network-scripts/ifcfg-$interface are available to
+    you.
+
+See the scripts in /etc/dhcp/dhclient.d for examples.
+
+NOTE:  Do not use functions defined in /sbin/dhclient-script.  Consider
+dhclient-script a black box.  This script may change over time, so the
+dhclient.d scripts should not be using functions defined in it.
+
+-- 
+David Cantrell <dcantrell@redhat.com>

dhclient-script

@@ -330,48 +330,6 @@ dhconfig() {
         hostname ${new_host_name}
     fi
 
-    if [ ! "${PEERNIS}" = "no" ]; then
-        if [ -n "${new_nis_domain}" ]; then
-            domainname "${new_nis_domain}"
-            save_previous /etc/yp.conf
-            let contents=0
-            echo '# generated by /sbin/dhclient-script' > /etc/yp.conf
-
-            if [ -n "${new_nis_servers}" ]; then
-                for i in ${new_nis_servers} ; do
-                    echo "domain ${new_nis_domain} server ${i}" >> /etc/yp.conf
-                    let contents=contents+1
-                done
-            else
-                echo "domain ${new_nis_domain} broadcast" >> /etc/yp.conf
-                let contents=contents+1
-            fi
-
-            if [ ${contents} -gt 0 ]; then
-                if [ -x /etc/rc.d/init.d/ypbind ] &&
-                   [ -r /var/run/ypbind.pid ]; then
-                    service ypbind restart >/dev/null 2>&1
-                fi
-            fi
-        elif [ -n "${new_nis_servers}" ]; then
-            save_previous /etc/yp.conf
-            echo '# generated by /sbin/dhclient-script' > /etc/yp.conf
-            let contents=0
-
-            for i in ${new_nis_servers} ; do
-                echo "ypserver ${i}" >> /etc/yp.conf
-                let contents=contents+1
-            done
-
-            if [ $contents -gt 0 ]; then
-                if [ -x /etc/rc.d/init.d/ypbind ] &&
-                   [ -r /var/run/ypbind.pid ]; then
-                    service ypbind restart >/dev/null 2>&1
-                fi
-            fi
-        fi
-    fi
-
     if [ -n "${DHCP_TIME_OFFSET_SETS_TIMEZONE}" ] &&
        [[ "${DHCP_TIME_OFFSET_SETS_TIMEZONE}" = [yY1]* ]]; then
         if [ -n "${new_time_offset}" ]; then
@@ -396,20 +354,15 @@ dhconfig() {
         fi
     fi
 
-    if [ ! "${PEERNTP}" = "no" ] &&
-       [ -n "${new_ntp_servers}" ] && [ -e /etc/ntp.conf ]; then
-        save_previous /etc/ntp.conf
-        egrep -v '^server .*  # added by /sbin/dhclient-script$'< ${SAVEDIR}/ntp.conf.predhclient.${interface} > /etc/ntp.conf
-        restorecon /etc/ntp.conf >/dev/null 2>&1
-
-        for s in ${new_ntp_servers} ; do
-            echo "server ${s}  # added by /sbin/dhclient-script" >> /etc/ntp.conf
+    # execute any additional client side configuration scripts we have
+    if [ -d /etc/dhcp/dhclient.d ]; then
+        for f in /etc/dhcp/dhclient.d/*.sh ; do
+            if [ -x ${f} ]; then
+                subsystem="$(basename ${f} .sh)"
+                . ${f}
+                \${subsystem}_config
+            fi
         done
-
-        diff -q /etc/ntp.conf ${SAVEDIR}/ntp.conf.predhclient.${interface} >/dev/null 2>&1
-        if [ $? -eq 1 ]; then
-            service ntpd condrestart >/dev/null 2>&1
-        fi
     fi
 }
 

dhcp.spec

@@ -1,18 +1,10 @@
 # vendor string (e.g., Fedora, EL)
 %define vvendor Fedora
 
-# Make it easy for package rebuilders to enable DHCPv6 support
-%define dhcpv6opt --disable-dhcpv6
-
-%define with_DHCPv6 %{?_with_DHCPv6: 1} %{?!_with_DHCPv6: 0}
-%if %{with_DHCPv6}
-%define dhcpv6opt --enable-dhcpv6
-%endif
-
 Summary:  Dynamic host configuration protocol software
 Name:     dhcp
 Version:  4.1.0
-Release:  5%{?dist}
+Release:  6%{?dist}
 # NEVER CHANGE THE EPOCH on this package.  The previous maintainer (prior to
 # dcantrell maintaining the package) made incorrect use of the epoch and
 # that's why it is at 12 now.  It should have never been used, but it was.
@@ -30,6 +22,7 @@ Source5:  dhcpd-conf-to-ldap
 Source8:  dhclient-script
 Source9:  dhcp.schema
 Source10: get-ldap-patch.sh
+Source11: README.dhclient.d
 
 Patch0:   %{name}-4.1.0-errwarn-message.patch
 Patch1:   %{name}-4.1.0-ldap-configuration.patch
@@ -59,6 +52,7 @@ BuildRequires: libtool
 BuildRequires: openldap-devel
 
 Requires(post): chkconfig
+Requires(post): coreutils
 Requires(preun): chkconfig
 Requires(preun): initscripts
 Requires(postun): initscripts
@@ -79,6 +73,7 @@ the ISC DHCP service and relay agent.
 Summary: Provides the dhclient ISC DHCP client daemon and dhclient-script
 Group: System Environment/Base
 Requires: initscripts >= 6.75
+Requires(post): coreutils
 Obsoletes: dhcpcd <= 1.3.22pl1-7
 Provides: dhcpcd = 1.3.22pl1-8
 
@@ -189,6 +184,7 @@ libdhcpctl and libomapi static libraries are also included in this package.
 
 # Copy in the Fedora/RHEL dhclient script
 %{__install} -p -m 0755 %{SOURCE8} client/scripts/linux
+%{__install} -p -m 0644 %{SOURCE11} .
 
 # Ensure we don't pick up Perl as a dependency from the scripts and modules
 # in the contrib directory (we copy this to /usr/share/doc in the final
@@ -244,11 +240,15 @@ automake --foreign --add-missing --copy
 %build
 CFLAGS="%{optflags} -fPIC -D_GNU_SOURCE -DLDAP_CONFIGURATION -DUSE_SSL" \
 %configure \
-    %{dhcpv6opt} \
+    --enable-dhcpv6 \
     --with-srv-lease-file=%{_localstatedir}/lib/dhcpd/dhcpd.leases \
+    --with-srv6-lease-file=%{_localstatedir}/lib/dhcpd/dhcpd6.leases \
     --with-cli-lease-file=%{_localstatedir}/lib/dhclient/dhclient.leases \
+    --with-cli6-lease-file=%{_localstatedir}/lib/dhclient/dhclient6.leases \
     --with-srv-pid-file=%{_localstatedir}/run/dhcpd.pid \
+    --with-srv6-pid-file=%{_localstatedir}/run/dhcpd6.pid \
     --with-cli-pid-file=%{_localstatedir}/run/dhclient.pid \
+    --with-cli6-pid-file=%{_localstatedir}/run/dhclient6.pid \
     --with-relay-pid-file=%{_localstatedir}/run/dhcrelay.pid
 %{__make} %{?_smp_mflags}
 
@@ -273,6 +273,7 @@ CFLAGS="%{optflags} -fPIC -D_GNU_SOURCE -DLDAP_CONFIGURATION -DUSE_SSL" \
 # Start empty lease databases
 %{__mkdir} -p %{buildroot}%{_localstatedir}/lib/dhcpd/
 touch %{buildroot}%{_localstatedir}/lib/dhcpd/dhcpd.leases
+touch %{buildroot}%{_localstatedir}/lib/dhcpd/dhcpd6.leases
 %{__mkdir} -p %{buildroot}%{_localstatedir}/lib/dhclient/
 
 # Create default sysconfig files for dhcpd and dhcrelay
@@ -314,9 +315,8 @@ EOF
 %{__rm} -rf %{buildroot}
 
 %post
-if [ -f /etc/dhcpd.conf -a ! -f /etc/dhcp/dhcpd.conf ]; then
+if [ -f /etc/dhcpd.conf ]; then
     /bin/cp -a /etc/dhcpd.conf /etc/dhcp/dhcpd.conf >/dev/null 2>&1
-    /bin/rm -f /etc/dhcpd.conf >/dev/null 2>&1
 fi
 
 /sbin/chkconfig --add dhcpd
@@ -329,7 +329,13 @@ if [ $? = 0 ]; then
         cf="$(/bin/basename ${etcfile})"
         if [ ! -f /etc/dhcp/${cf} ]; then
             /bin/cp -a "${etcfile}" /etc/dhcp
-            /bin/rm -f "${etcfile}"
+            if [ ! -f "${etcfile}.rpmsave" ]; then
+                /bin/mv -f "${etcfile}" "${etcfile}.rpmsave"
+            elif [ ! -f "${etcfile}.rpmsave.$$" ]; then
+                /bin/mv -f "${etcfile}" "${etcfile}.rpmsave.$$"
+            else
+                /bin/mv -f "${etcfile}" "${etcfile}.rpmsave.$(date +%s)"
+            fi
         fi
     done || :
 fi || :
@@ -363,6 +369,7 @@ fi
 %dir %{_localstatedir}/lib/dhcpd
 %dir %{_sysconfdir}/dhcp
 %verify(not size md5 mtime) %config(noreplace) %{_localstatedir}/lib/dhcpd/dhcpd.leases
+%verify(not size md5 mtime) %config(noreplace) %{_localstatedir}/lib/dhcpd/dhcpd6.leases
 %config(noreplace) %{_sysconfdir}/sysconfig/dhcpd
 %config(noreplace) %{_sysconfdir}/sysconfig/dhcrelay
 %config(noreplace) %{_sysconfdir}/dhcp/dhcpd.conf
@@ -382,7 +389,7 @@ fi
 
 %files -n dhclient
 %defattr(-,root,root,-)
-%doc dhclient.conf.sample
+%doc dhclient.conf.sample README.dhclient.d
 %dir %{_sysconfdir}/dhcp
 %dir %{_sysconfdir}/dhcp/dhclient.d
 %dir %{_localstatedir}/lib/dhclient
@@ -407,6 +414,11 @@ fi
 %attr(0644,root,root) %{_mandir}/man3/omapi.3.gz
 
 %changelog
+* Mon Feb 16 2009 David Cantrell <dcantrell@redhat.com> - 12:4.1.0-6
+- Enable dhcpv6 support (#480798)
+- Fix config file migration in scriptlets (#480543)
+- Allow dhclient-script expansion with /etc/dhcp/dhclient.d/*.sh scripts
+
 * Thu Jan 15 2009 Tomas Mraz <tmraz@redhat.com> - 12:4.1.0-5
 - rebuild with new openssl