dhcp/dhcp-4.2.0-manpages.patch

diff -up dhcp-4.2.0/client/dhclient.8.man dhcp-4.2.0/client/dhclient.8
--- dhcp-4.2.0/client/dhclient.8.man	2010-07-10 05:25:51.000000000 +0200
+++ dhcp-4.2.0/client/dhclient.8	2010-07-21 14:27:13.000000000 +0200
@@ -115,6 +115,33 @@ relay
 .B -w
 ]
 [
+.B -B
+]
+[
+.B -I
+.I dhcp-client-identifier
+]
+[
+.B -H
+.I host-name
+]
+[
+.B -F
+.I fqdn.fqdn
+]
+[
+.B -V
+.I vendor-class-identifier
+]
+[
+.B -R
+.I request-option-list
+]
+[
+.B -timeout
+.I timeout
+]
+[
 .B -v
 ]
 [
@@ -142,46 +169,6 @@ important details about the network to w
 the location of a default router, the location of a name server, and
 so on.
 .PP
-If given the 
-.B -4
-command line argument (default), dhclient will use the
-DHCPv4 protocol to obtain an IPv4 address and configuration parameters.
-.PP
-If given the
-.B -6
-command line argument, dhclient will use the DHCPv6
-protocol to obtain whatever IPv6 addresses are available along with
-configuration parameters. But with
-.B -S
-it uses Information-request to get only (i.e., without address)
-stateless configuration parameters.
-.PP
-The default DHCPv6 behavior is modified too with
-.B -T
-which asks for IPv6 temporary addresses, one set per
-.B -T
-flag.
-.B -P
-enables the IPv6 prefix delegation.
-As temporary addresses or prefix delegation disables the normal
-address query,
-.B -N
-restores it. Note it is not recommended to mix queries of different types
-together, or even to share the lease file between them.
-.PP
-By default, DHCPv6 dhclient creates an identifier based on the
-link-layer address (DUID-LL) if it is running in stateless mode (with
--S, not requesting an address), or it creates an identifier based on
-the link-layer address plus a timestamp (DUID-LLT) if it is running in
-stateful mode (without -S, requesting an address).
-.B -D
-overrides this default, with a value of either "LL" or "LLT".
-.PP
-If given the 
-.B --version
-command line argument, dhclient will print its
-version number and exit.
-.PP
 On startup, dhclient reads the
 .IR dhclient.conf
 for configuration instructions.   It then gets a list of all the
@@ -235,141 +222,269 @@ file.   If interfaces are specified in t
 only configure interfaces that are either specified in the
 configuration file or on the command line, and will ignore all other
 interfaces.
-.PP
-If the DHCP client should listen and transmit on a port other than the
-standard (port 68), the
-.B -p
-flag may used.  It should be followed by the udp port number that
-dhclient should use.  This is mostly useful for debugging purposes.
-If a different port is specified for the client to listen on and
-transmit on, the client will also use a different destination port -
-one less than the specified port.
-.PP
-The DHCP client normally transmits any protocol messages it sends
-before acquiring an IP address to, 255.255.255.255, the IP limited
-broadcast address.   For debugging purposes, it may be useful to have
-the server transmit these messages to some other address.   This can
-be specified with the 
-.B -s
-flag, followed by the IP address or domain name of the destination.
-This feature is not supported by DHCPv6.
-.PP
-For testing purposes, the giaddr field of all packets that the client
-sends can be set using the
-.B -g
-flag, followed by the IP address to send.   This is only useful for testing,
-and should not be expected to work in any consistent or useful way.
-.PP
-The DHCP client will normally run in the foreground until it has
-configured an interface, and then will revert to running in the
-background.   To run force dhclient to always run as a foreground
-process, the
-.B -d
-flag should be specified.  This is useful when running the client
-under a debugger, or when running it out of inittab on System V
-systems.
-.PP
-The dhclient daemon creates its own environment when executing the
-dhclient-script to do the grunt work of interface configuration.
-To define extra environment variables and their values, use the
-.B -e
-flag, followed by the environment variable name and value assignment,
-just as one would assign a variable in a shell.  Eg:
-.B -e
-.I IF_METRIC=1
-.PP
-The client normally prints no output during its startup sequence.  It
-can be made to emit verbose messages displaying the startup sequence events
-until it has acquired an address by supplying the
-.B -v
-command line argument.  In either case, the client logs messages using
-the
-.B syslog (3)
-facility.  A
-.B -q
-command line argument is provided for backwards compatibility, but since
-dhclient is quiet by default, it has no effect.
-.PP
-The client normally doesn't release the current lease as it is not
-required by the DHCP protocol.  Some cable ISPs require their clients
-to notify the server if they wish to release an assigned IP address.
-The
-.B -r
-flag explicitly releases the current lease, and once the lease has been
-released, the client exits.
-.PP
+.SH OPTIONS
+.TP
+.BI \-4
+Use the DHCPv4 protocol to obtain an IPv4 address and configuration
+parameters (default).
+
+.TP
+.BI \-6
+Use the DHCPv6 protocol to obtain whatever IPv6 addresses are available
+along with configuration parameters.  The functionality of DHCPv6 mode
+may be modified with the
+.BI \-S
+,
+.BI \-T
+, and
+.BI \-N
+options.
+
+.TP
+.BI \-S
+Perform an information-only request over DHCPv6 to get stateless
+configuration parameters.  It is not recommended to combine this option
+with the
+.BI \-N
+,
+.BI \-P
+, or
+.BI \-T
+options or to share lease files between different modes of operation.  Only
+valid with the
+.BI \-6
+option.
+
+.TP
+.BI \-N
+Perform a normal (IA_NA) address query over DHCPv6.  It is not recommended
+to combine this option with the
+.BI \-P
+,
+.BI \-S
+, or
+.BI \-T
+options or to share lease files between different modes of operation.  Only
+valid with the
+.BI \-6
+option.
+
+.TP
+.BI \-T
+Perform a temporary (IA_TA) address query over DHCPv6 (disables normal address
+query).  It is not recommended to combine this option with the
+.BI \-N
+,
+.BI \-P
+, or
+.BI \-S
+options or to share lease files between different modes of operation.  Only
+valid with the
+.BI \-6
+option.
+
+.TP
+.BI \-P
+Enable IPv6 prefix delegation (disables normal address query).  It is not
+not recommended to combine this option with the
+.BI \-N
+,
+.BI \-S
+, or
+.BI \-T
+options or to share lease files between different modes of operation.  Only
+valid with the
+.BI \-6
+option.
+
+.TP
+.BI \-D
+By default, DHCPv6 dhclient creates an identifier based on the
+link-layer address (DUID-LL) if it is running in stateless mode (with
+-S, not requesting an address), or it creates an identifier based on
+the link-layer address plus a timestamp (DUID-LLT) if it is running in
+stateful mode (without -S, requesting an address).
+.BI \-D
+overrides this default, with a value of either "LL" or "LLT".
+
+.TP
+.BI \-p\ <port\ number>
+The UDP port number the DHCP client should listen and transmit on.  If
+unspecified,
+.B dhclient
+uses the default port 68.  This option is mostly useful for debugging
+purposes.  If a different port is specified for the client to listen and
+transmit on, the client will also use a different destination port - one
+less than the specified port.
+
+.TP
+.BI \-d
+Force
+.B dhclient
+to run as a foreground process.  This is useful when running the client
+under a debugger, or when running it out of inittab on System V systems.
+
+.TP
+.BI \-e\ VAR=value
+Define additional environment variables for the environment where
+dhclient-script executes.  You may specify multiplate
+.B \-e
+options on the command line.  For example:
+.B \-e IF_METRIC=1
+
+.TP
+.BI \-q
+Suppress all terminal and log output except error messages.
+
+.TP
+.BI \-1
+Try once to get a lease.  One failure, exit with code 2.
+
+.TP
+.BI \-r
+Tell
+.B dhclient
+to release the current lease it has from the server.  This is not required
+by the DHCP protocol, but some ISPs require their clients to notify the
+server if they wish to release an assigned IP address.
+
+.TP
+.BI \-lf\ <lease-file>
+Path to the lease database file.  If unspecified, the default
+.B DBDIR/dhclient.leases
+is used.
+
+.TP
+.BI \-pf\ <pid-file>
+Path to the process ID file.  If unspecified, the default
+.B RUNDIR/dhclient.pid
+is used.
+
+.TP
+.BI \-cf\ <config-file>
+Path to the client configuration file.  If unspecified, the default
+.B ETCDIR/dhclient.conf
+is used.
+
+.TP
+.BI \-sf\ <script-file>
+Path to the network configuration script invoked by
+.B dhclient
+when it gets a lease.  If unspecified, the default
+.B CLIENTBINDIR/dhclient-script
+is used.
+
+.TP
+.BI \-s\ <server>
+Specifiy the server IP address or fully qualified domain name to transmit
+DHCP protocol messages to.  Normally,
+.B dhclient
+transmits these messages to 255.255.255.255 (the IP limited broadcast
+address).  Overriding this is mostly useful for debugging purposes.
+
+.TP
+.BI \-g\ <relay>
+Only for debugging.  Set the giaddr field of all packets the client
+sends to the IP address specified.  This should not be expected to work
+in any consistent or useful way.
+
+.TP
+.BI \-n
+Do not configure any interfaces.  Most useful combined with the
+.B -w
+option.
+
+.TP
+.BI \-nw
+Become a daemon process immediately (nowait) rather than waiting until an IP
+address has been acquired.
+
+.TP
+.BI \-w
+Keep running even if no network interfaces are found.  The
+.B omshell
+program can be used to notify the client when a network interface has been
+added or removed so it can attempt to configure an IP address on that
+interface.
+
+.TP
+.BI \-B
+Set the BOOTP broadcast flag in request packets so servers will always
+broadcast replies.
+
+.TP
+.BI \-I\ <dhcp-client-identifier>
+Specify the dhcp-client-identifier option to send to the DHCP server.
+
+.TP
+.BI \-H\ <host-name>
+Specify the host-name option to send to the DHCP server.  The host-name
+string only contains the client's hostname prefix, to which the server will
+append the ddns-domainname or domain-name options, if any, to derive the
+fully qualified domain name of the client.  The
+.B -H
+option cannot be used with the
+.B -F
+option.
+
+.TP
+.BI \-F\ <fqdn.fqdn>
+Specify the fqdn.fqdn option to send to the DHCP server.  This option cannot
+be used with the
+.B -H
+option.  The fqdn.fqdn option must specify the complete domain name of the
+client host, which the server may use for dynamic DNS updates.
+
+.TP
+.BI \-V\ <vendor-class-identifier>
+Specify the vendor-class-identifier option to send to the DHCP server.
+
+.TP
+.BI \-R\ <option>[,<option>...]
+Specify the list of options the client is to request from the server.  The
+option list must be a single string consisting of option names separated
+by at least one command and optional space characters.  The default option
+list is:
+
+.BR
+    subnet-mask, broadcast-address, time-offset, routers,
+.BR
+    domain-search, domain-name, domain-name-servers, host-name, 
+.BR
+    nis-domain, nis-servers, ntp-servers, interface-mtu
+
 The
-.B -x
-flag tells any currently running client to exit gracefully without
-releasing leases first.
+.B -R
+option does not append options to the default request, it overrides the
+default request list.  Keep this in mind if you want to request an
+additional option besides the default request list.  You will have to
+specify all option names for the
+.B -R
+parameter.
+
+.TP
+.BI \-timeout\ <timeout>
+Specify the time after which
+.B dhclient
+will decide that no DHCP servers can be contacted when no responses have been
+received.
+
+.TP
+.BI \-v
+Enable verbose log messages.
+
 .PP
-If the client is killed by a signal (for example at shutdown or reboot)
-it won't execute the
+If the client is killed by a signale (for example at shutdown or reboot), it
+will not execute the
 .B dhclient-script (8)
-at exit. However if you shut the client down gracefully with
-.B -r
+at exit.  However, if you shut the client down gracefully with
+.BI \-r
 or
-.B -x
+.BI \-x
 it will execute
 .B dhclient-script (8)
-at shutdown with the specific reason for calling the script set.
-.PP
-The
-.B -1
-flag will cause dhclient to try once to get a lease.  If it fails, dhclient
-exits with exit code two. In DHCPv6 the
-.B -1
-flag sets the max duration of the initial exchange to
-.I timeout
-(from
-.IR dhclient.conf ,
-default sixty seconds).
-.PP
-The DHCP client normally gets its configuration information from
-.B ETCDIR/dhclient.conf,
-its lease database from
-.B DBDIR/dhclient.leases,
-stores its process ID in a file called
-.B RUNDIR/dhclient.pid,
-and configures the network interface using
-.B CLIENTBINDIR/dhclient-script
-To specify different names and/or locations for these files, use the
-.B -cf,
-.B -lf,
-.B -pf
-and
-.B -sf
-flags, respectively, followed by the name of the file.   This can be
-particularly useful if, for example,
-.B DBDIR
-or
-.B RUNDIR
-has not yet been mounted when the DHCP client is started.
-.PP
-The DHCP client normally exits if it isn't able to identify any
-network interfaces to configure.   On laptop computers and other
-computers with hot-swappable I/O buses, it is possible that a
-broadcast interface may be added after system startup.   The
-.B -w
-flag can be used to cause the client not to exit when it doesn't find
-any such interfaces.   The
-.B omshell (1)
-program can then be used to notify the client when a network interface
-has been added or removed, so that the client can attempt to configure an IP
-address on that interface.
-.PP
-The DHCP client can be directed not to attempt to configure any interfaces
-using the
-.B -n
-flag.   This is most likely to be useful in combination with the
-.B -w
-flag.
-.PP
-The client can also be instructed to become a daemon immediately, rather
-than waiting until it has acquired an IP address.   This can be done by
-supplying the
-.B -nw
-flag.
+at shutdown with the specific reason for calling the script set in the
+environment table.
 .SH CONFIGURATION
 The syntax of the dhclient.conf(5) file is discussed separately.
 .SH OMAPI
diff -up dhcp-4.2.0/client/dhclient.conf.5.man dhcp-4.2.0/client/dhclient.conf.5
--- dhcp-4.2.0/client/dhclient.conf.5.man	2010-07-10 05:25:51.000000000 +0200
+++ dhcp-4.2.0/client/dhclient.conf.5	2010-07-21 14:14:00.000000000 +0200
@@ -186,7 +186,8 @@ responding to the client send the client
 options.   Only the option names should be specified in the request
 statement - not option parameters.   By default, the DHCPv4 client
 requests the subnet-mask, broadcast-address, time-offset, routers,
-domain-name, domain-name-servers and host-name options while the DHCPv6
+domain-search, domain-name, domain-name-servers, host-name, nis-domain,
+nis-servers, ntp-servers and interface-mtu options while the DHCPv6
 client requests the dhcp6 name-servers and domain-search options.  Note
 that if you enter a \'request\' statement, you over-ride these defaults
 and these options will not be requested.
@@ -672,6 +673,17 @@ know the DHCP service(s) anycast MAC add
 client.  The \fIlink-type\fR and \fImac-address\fR parameters are configured
 in a similar manner to the \fBhardware\fR statement.
 .PP
+ \fBbootp-broadcast-always;\fR
+.PP
+The
+.B bootp-broadcast-always
+statement instructs dhclient to always set the bootp broadcast flag in
+request packets, so that servers will always broadcast replies.
+This is equivalent to supplying the dhclient -B argument, and has
+the same effect as specifying 'always-broadcast' in the server's dhcpd.conf.
+This option is provided as an extension to enable dhclient to work
+on IBM s390 Linux guests.
+.PP
 .SH SAMPLE
 The following configuration file is used on a laptop running NetBSD
 1.3.   The laptop has an IP alias of 192.5.5.213, and has one
@@ -694,10 +706,10 @@ interface "ep0" {
     hardware ethernet 00:a0:24:ab:fb:9c;
     send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
     send dhcp-lease-time 3600;
-    supersede domain-name "fugue.com rc.vix.com home.vix.com";
+    supersede domain-search "fugue.com", "rc.vix.com", "home.vix.com";
     prepend domain-name-servers 127.0.0.1;
     request subnet-mask, broadcast-address, time-offset, routers,
-	    domain-name, domain-name-servers, host-name;
+	    domain-search, domain-name, domain-name-servers, host-name;
     require subnet-mask, domain-name-servers;
     script "CLIENTBINDIR/dhclient-script";
     media "media 10baseT/UTP", "media 10base2/BNC";
diff -up dhcp-4.2.0/client/dhclient-script.8.man dhcp-4.2.0/client/dhclient-script.8
--- dhcp-4.2.0/client/dhclient-script.8.man	2010-07-10 05:25:51.000000000 +0200
+++ dhcp-4.2.0/client/dhclient-script.8	2010-07-21 14:00:16.000000000 +0200
@@ -47,7 +47,7 @@ customizations are needed, they should b
 exit hooks provided (see HOOKS for details).   These hooks will allow the
 user to override the default behaviour of the client in creating a
 .B /etc/resolv.conf
-file.
+file, and to handle DHCP options not handled by default.
 .PP
 No standard client script exists for some operating systems, even though
 the actual client may work, so a pioneering user may well need to create
@@ -91,6 +91,26 @@ present.   The
 .B ETCDIR/dhclient-exit-hooks
 script can modify the valid of exit_status to change the exit status
 of dhclient-script.
+.PP
+Immediately after dhclient brings an interface UP with a new IP address,
+subnet mask, and routes, in the REBOOT/BOUND states, it will check for the
+existence of an executable
+.B ETCDIR/dhclient-up-hooks
+script, and source it if found. This script can handle DHCP options in
+the environment that are not handled by default. A per-interface.
+.B ETCDIR/dhclient-${IF}-up-hooks
+script will override the generic script and be sourced when interface
+$IF has been brought up.
+.PP
+Immediately before dhclient brings an interface DOWN, removing its IP
+address, subnet mask, and routes, in the STOP/RELEASE  states, it will
+check for the existence of an executable
+.B ETCDIR/dhclient-down-hooks
+script, and source it if found. This script can handle DHCP options in
+the environment that are not handled by default. A per-interface
+.B ETCDIR/dhclient-${IF}-down-hooks
+script will override the generic script and be sourced when interface
+$IF is about to be brought down.
 .SH OPERATION
 When dhclient needs to invoke the client configuration script, it
 defines a set of variables in the environment, and then invokes
diff -up dhcp-4.2.0/common/dhcp-options.5.man dhcp-4.2.0/common/dhcp-options.5
--- dhcp-4.2.0/common/dhcp-options.5.man	2010-07-10 05:25:51.000000000 +0200
+++ dhcp-4.2.0/common/dhcp-options.5	2010-07-21 14:00:16.000000000 +0200
@@ -913,6 +913,21 @@ classless IP routing - it does not inclu
 classless IP routing is now the most widely deployed routing standard,
 this option is virtually useless, and is not implemented by any of the
 popular DHCP clients, for example the Microsoft DHCP client.
+.PP
+NOTE to Fedora dhclient users:
+.br
+dhclient-script interprets trailing 0 octets of the target as indicating
+the subnet class of the route, so for the following static-routes value:
+.br
+        option static-routes 172.0.0.0 172.16.2.254,
+.br
+                             192.168.0.0 192.168.2.254;
+.br
+dhclient-script will create routes:
+.br
+        172/8 via 172.16.2.254 dev $interface
+.br
+        192.168/16 via 192.168.2.254 dev $interface
 .RE
 .PP
 .nf
diff -up dhcp-4.2.0/server/dhcpd.conf.5.man dhcp-4.2.0/server/dhcpd.conf.5
--- dhcp-4.2.0/server/dhcpd.conf.5.man	2010-07-10 05:25:51.000000000 +0200
+++ dhcp-4.2.0/server/dhcpd.conf.5	2010-07-21 14:00:16.000000000 +0200
@@ -519,6 +519,9 @@ pool {
 };
 .fi
 .PP
+Dynamic BOOTP leases are not compatible with failover, and, as such,
+you need to disallow BOOTP in pools that you are using failover for.
+.PP
 The  server currently  does very  little  sanity checking,  so if  you
 configure it wrong, it will just  fail in odd ways.  I would recommend
 therefore that you either do  failover or don't do failover, but don't
@@ -533,9 +536,9 @@ primary server might look like this:
 failover peer "foo" {
   primary;
   address anthrax.rc.vix.com;
-  port 519;
+  port 647;
   peer address trantor.rc.vix.com;
-  peer port 520;
+  peer port 847;
   max-response-delay 60;
   max-unacked-updates 10;
   mclt 3600;
@@ -1305,7 +1308,7 @@ the zone containing PTR records - for IS
 .PP
 .nf
 key DHCP_UPDATER {
-  algorithm HMAC-MD5.SIG-ALG.REG.INT;
+  algorithm hmac-md5;
   secret pRP5FapFoJ95JEL06sv4PQ==;
 };
 
@@ -1328,7 +1331,7 @@ dhcpd.conf file:
 .PP
 .nf
 key DHCP_UPDATER {
-  algorithm HMAC-MD5.SIG-ALG.REG.INT;
+  algorithm hmac-md5;
   secret pRP5FapFoJ95JEL06sv4PQ==;
 };
 
@@ -2540,7 +2543,8 @@ statement
 The \fInext-server\fR statement is used to specify the host address of
 the server from which the initial boot file (specified in the
 \fIfilename\fR statement) is to be loaded.   \fIServer-name\fR should
-be a numeric IP address or a domain name.
+be a numeric IP address or a domain name.  If no \fInext-server\fR statement
+applies to a given client, the address 0.0.0.0 is used.
 .RE
 .PP
 The