device-mapper-multipath/multipath.conf
Benjamin Marzinski efd38c93e9 device-mapper-multipath-0.4.9-68
Modify multipath.conf
  * remove getuid_callout example
Re-add 0050-RH-listing-speedup.patch
Add 0081-RHBZ-1066264-check-prefix-on-rename.patch
  * make multipath check the prefix on kpartx partitions during rename, and
    copy the existing behaviour
Add 0082-UPBZ-1109995-no-sync-turs-on-pthread_cancel.patch
  * If async tur checker fails on threads, don't retry with the sync version
Add 0083-RHBZ-1080055-orphan-paths-on-reload.patch
  * Fix case where pathlist wasn't getting updated properly
Add 0084-RHBZ-1110000-multipath-man.patch
  * fix errors in multipath man page
Add 0085-UPBZ-1110006-datacore-config.patch
  * Add support for DataCore Virtual Disk
Add 0086-RHBZ-1110007-orphan-path-on-failed-add.patch
  * If multipathd fails to add path correctly, it now fully orphans the path
Add 0087-RHBZ-1110013-config-error-checking.patch
  * Improve multipath.conf error checking.
Add 0088-RHBZ-1069811-configurable-prio-timeout.patch
  * checker_timeout now adjusts the timeouts of the prioritizers as well.
Add 0089-RHBZ-1110016-add-noasync-option.patch
  * Add a new defaults option, "force_sync", that disables the async mode
    of the path checkers. This is for cases where to many parallel checkers
    hog the cpu
Add 0090-UPBZ-1080038-reorder-paths-for-round-robin.patch
  * make multipathd order paths for better throughput in round-robin mode
Add 0091-RHBZ-1069584-fix-empty-values-fast-io-fail-and-dev-loss.patch
  * check for null pointers in configuration reading code.
Add 0092-UPBZ-1104605-reload-on-rename.patch
  * Reload table on rename if necessary
Add 0093-UPBZ-1086825-user-friendly-name-remap.patch
  * Keep existing user_friend_name if possible
Add 0094-RHBZ-1086825-cleanup-remap.patch
  * Cleanup issues with upstream patch
Add 0095-RHBZ-1127944-xtremIO-config.patch
  * Add support for EMC ExtremIO devices
Add 0096-RHBZ-979474-new-wildcards.patch
  * Add N, n, R, and r path wildcards to print World Wide ids
Add 0097-RH-fix-coverity-errors.patch
  * Fix a number of unterminated strings and memory leaks on failure
    paths.
Add 0098-UPBZ-1067171-mutipath-i.patch
  * Add -i option to ignore wwids file when checking for valid paths
Add 0099-RH-add-all-devs.patch
  * Add new devices config option all_devs. This makes the configuration
    overwrite the specified values in all builtin configs
Add 0100-RHBZ-1067171-multipath-i-update.patch
  * make -i work correctly with find_multipaths
Add 0101-RH-adapter-name-wildcard.patch
  * Add 'a' path wildcard to print adapter name
2014-09-16 18:22:40 -05:00

94 lines
2.4 KiB
Plaintext

# This is a basic configuration file with some examples, for device mapper
# multipath.
#
# For a complete list of the default configuration values, run either
# multipath -t
# or
# multipathd show config
#
# For a list of configuration options with descriptions, see the multipath.conf
# man page
## By default, devices with vendor = "IBM" and product = "S/390.*" are
## blacklisted. To enable mulitpathing on these devies, uncomment the
## following lines.
#blacklist_exceptions {
# device {
# vendor "IBM"
# product "S/390.*"
# }
#}
## Use user friendly names, instead of using WWIDs as names.
defaults {
user_friendly_names yes
find_multipaths yes
}
##
## Here is an example of how to configure some standard options.
##
#
#defaults {
# udev_dir /dev
# polling_interval 10
# selector "round-robin 0"
# path_grouping_policy multibus
# prio alua
# path_checker readsector0
# rr_min_io 100
# max_fds 8192
# rr_weight priorities
# failback immediate
# no_path_retry fail
# user_friendly_names yes
#}
##
## The wwid line in the following blacklist section is shown as an example
## of how to blacklist devices by wwid. The 2 devnode lines are the
## compiled in default blacklist. If you want to blacklist entire types
## of devices, such as all scsi devices, you should use a devnode line.
## However, if you want to blacklist specific devices, you should use
## a wwid line. Since there is no guarantee that a specific device will
## not change names on reboot (from /dev/sda to /dev/sdb for example)
## devnode lines are not recommended for blacklisting specific devices.
##
#blacklist {
# wwid 26353900f02796769
# devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
# devnode "^hd[a-z]"
#}
#multipaths {
# multipath {
# wwid 3600508b4000156d700012000000b0000
# alias yellow
# path_grouping_policy multibus
# path_checker readsector0
# path_selector "round-robin 0"
# failback manual
# rr_weight priorities
# no_path_retry 5
# }
# multipath {
# wwid 1DEC_____321816758474
# alias red
# }
#}
#devices {
# device {
# vendor "COMPAQ "
# product "HSV110 (C)COMPAQ"
# path_grouping_policy multibus
# path_checker readsector0
# path_selector "round-robin 0"
# hardware_handler "0"
# failback 15
# rr_weight priorities
# no_path_retry queue
# }
# device {
# vendor "COMPAQ "
# product "MSA1000 "
# path_grouping_policy multibus
# }
#}