device-mapper-multipath/SOURCES/0061-RH-fix-find_multipaths-in-mpathconf.patch

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Benjamin Marzinski <bmarzins@redhat.com>
Date: Wed, 10 Feb 2021 15:42:42 -0600
Subject: [PATCH] RH: fix find_multipaths in mpathconf

mpathconf wasn't correctly dealing with the new rhel-8 values for
find_multipaths

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
---
 multipath/mpathconf   | 38 +++++++++++++++++++-------------------
 multipath/mpathconf.8 | 14 +++++++-------
 2 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/multipath/mpathconf b/multipath/mpathconf
index f34003c9..2f4f3eaf 100644
--- a/multipath/mpathconf
+++ b/multipath/mpathconf
@@ -54,7 +54,7 @@ function usage
 	echo "Disable: --disable"
 	echo "Only allow certain wwids (instead of enable): --allow <WWID>"
 	echo "Set user_friendly_names (Default y): --user_friendly_names <y|n>"
-	echo "Set find_multipaths (Default y): --find_multipaths <y|n>"
+	echo "Set find_multipaths (Default y): --find_multipaths <yes|no|strict|greedy|smart>"
 	echo "Set default property blacklist (Default y): --property_blacklist <y|n>"
 	echo "Set enable_foreign to show foreign devices (Default n): --enable_foreign <y|n>"
 	echo "Load the dm-multipath modules on enable (Default y): --with_module <y|n>"
@@ -224,8 +224,12 @@ function validate_args
 		echo "--user_friendly_names must be either 'y' or 'n'"
 		exit 1
 	fi
-	if [ -n "$FIND" ] && [ "$FIND" != "y" -a "$FIND" != "n" ]; then
-		echo "--find_multipaths must be either 'y' or 'n'"
+	if [ "$FIND" = "y" ]; then
+		FIND="yes"
+	elif [ "$FIND" = "n" ]; then
+		FIND="no"
+	elif [ -n "$FIND" ] && [ "$FIND" != "yes" -a "$FIND" != "no" -a "$FIND" != "strict" -a "$FIND" != "greedy" -a "$FIND" != "smart" ]; then
+		echo "--find_multipaths must be one of 'yes' 'no' 'strict' 'greedy' or 'smart'"
 		exit 1
 	fi
 	if [ -n "$PROPERTY" ] && [ "$PROPERTY" != "y" -a "$PROPERTY" != "n" ]; then
@@ -327,10 +331,11 @@ if [ "$HAVE_BLACKLIST" = "1" ]; then
 fi
 
 if [ "$HAVE_DEFAULTS" = "1" ]; then
-	if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*find_multipaths[[:space:]]*\(yes\|1\)" ; then
-		HAVE_FIND=1
-	elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*find_multipaths[[:space:]]*\(no\|0\)" ; then
-		HAVE_FIND=0
+	HAVE_FIND=`sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | sed -n 's/^[[:blank:]]*find_multipaths[[:blank:]]*\([^[:blank:]]*\).*$/\1/p' | sed -n 1p`
+	if [ "$HAVE_FIND" = "1" ]; then
+		HAVE_FIND="yes"
+	elif [ "$HAVE_FIND" = "0" ]; then
+		HAVE_FIND="no"
 	fi
 	if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)" ; then
 		HAVE_FRIENDLY=1
@@ -360,10 +365,10 @@ if [ -n "$SHOW_STATUS" ]; then
 	else
 		echo "multipath is disabled"
 	fi
-	if [ -z "$HAVE_FIND"  -o "$HAVE_FIND" = 0 ]; then
-		echo "find_multipaths is disabled"
+	if [ -z "$HAVE_FIND" ]; then
+		echo "find_multipaths is no"
 	else
-		echo "find_multipaths is enabled"
+		echo "find_multipaths is $HAVE_FIND"
 	fi
 	if [ -z "$HAVE_FRIENDLY" -o "$HAVE_FRIENDLY" = 0 ]; then
 		echo "user_friendly_names is disabled"
@@ -455,19 +460,14 @@ elif [ "$ENABLE" = 0 ]; then
 	fi
 fi
 
-if [ "$FIND" = "n" ]; then
-	if [ "$HAVE_FIND" = 1 ]; then
-		sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*find_multipaths[[:space:]]*\(yes\|1\)/	find_multipaths no/' $TMPFILE
-		CHANGED_CONFIG=1
-	fi
-elif [ "$FIND" = "y" ]; then
+if [ -n "$FIND" ]; then
 	if [ -z "$HAVE_FIND" ]; then
 		sed -i '/^defaults[[:space:]]*{/ a\
-	find_multipaths yes
+	find_multipaths '"$FIND"'
 ' $TMPFILE
 		CHANGED_CONFIG=1
-	elif [ "$HAVE_FIND" = 0 ]; then
-		sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*find_multipaths[[:space:]]*\(no\|0\)/	find_multipaths yes/' $TMPFILE
+	elif [ "$FIND" != "$HAVE_FIND" ]; then
+		sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:blank:]]*find_multipaths[[:blank:]]*[^[:blank:]]*/	find_multipaths '"$FIND"'/' $TMPFILE
 		CHANGED_CONFIG=1
 	fi
 fi
diff --git a/multipath/mpathconf.8 b/multipath/mpathconf.8
index b82961d6..83515eb4 100644
--- a/multipath/mpathconf.8
+++ b/multipath/mpathconf.8
@@ -38,9 +38,9 @@ If
 already exists, mpathconf will edit it. If it does not exist, mpathconf will
 create a default file with
 .B user_friendly_names
-and
+set and
 .B find_multipaths
-set. To disable these, use the
+set to \fByes\fP. To disable these, use the
 .B --user_friendly_names n
 and
 .B --find_multipaths n
@@ -77,13 +77,13 @@ to the
 defaults section. If set to \fBn\fP, this removes the line, if present. This
 command can be used along with any other command.
 .TP
-.B --find_multipaths\fP { \fBy\fP | \fBn\fP }
-If set to \fBy\fP, this adds the line
-.B find_multipaths yes
+.B --find_multipaths\fP { \fByes\fP | \fBno\fP | \fBstrict\fP | \fBgreedy\fP | \fBsmart\fP }
+If set to \fB<value>\fP, this adds the line
+.B find_multipaths <value>
 to the
 .B /etc/multipath.conf
-defaults section. If set to \fBn\fP, this removes the line, if present. This
-command can be used along with any other command.
+defaults section. This command can be used along with any other command.
+\fBy\fP and \fBn\fP can be used instead of \fByes\fP and \fBno\fP.
 .TP
 .B --property_blacklist \fP { \fBy\fP | \fBn\fP }
 If set to \fBy\fP, this adds the line
-- 
2.17.2