Index: multipath-tools-090724/libmultipath/hwtable.c
===================================================================
--- multipath-tools-090724.orig/libmultipath/hwtable.c
+++ multipath-tools-090724/libmultipath/hwtable.c
@@ -589,7 +589,7 @@ static struct hwentry default_hw[] = {
 		.vendor        = "IBM",
 		.product       = "S/390 DASD ECKD",
 		.bl_product       = "S/390.*",
-		.getuid        = "/sbin/dasdinfo -u -b %n",
+		.getuid        = "/sbin/dasd_id /dev/%n",
 		.features      = "1 queue_if_no_path",
 		.hwhandler     = DEFAULT_HWHANDLER,
 		.selector      = DEFAULT_SELECTOR,
Index: multipath-tools-090724/Makefile.inc
===================================================================
--- multipath-tools-090724.orig/Makefile.inc
+++ multipath-tools-090724/Makefile.inc
@@ -26,7 +26,7 @@ libudevdir  = ${prefix}/lib/udev
 multipathdir = $(TOPDIR)/libmultipath
 mandir      = $(prefix)/usr/share/man/man8
 man5dir     = $(prefix)/usr/share/man/man5
-rcdir	    = $(prefix)/etc/init.d
+rcdir	    = $(prefix)/etc/rc.d/init.d
 syslibdir   = $(prefix)/$(LIB)
 libdir	    = $(prefix)/$(LIB)/multipath
 
Index: multipath-tools-090724/multipathd/Makefile
===================================================================
--- multipath-tools-090724.orig/multipathd/Makefile
+++ multipath-tools-090724/multipathd/Makefile
@@ -35,6 +35,7 @@ install:
 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)
 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(rcdir)
+	$(INSTALL_PROGRAM) -m 755 multipathd.init.redhat $(DESTDIR)$(rcdir)/$(EXEC)
 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)
 	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)
 
Index: multipath-tools-090724/multipath/Makefile
===================================================================
--- multipath-tools-090724.orig/multipath/Makefile
+++ multipath-tools-090724/multipath/Makefile
@@ -27,6 +27,9 @@ install:
 	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)
 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir)
 	$(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5.gz $(DESTDIR)$(man5dir)
+	if [ ! -e $(DESTDIR)//etc/multipath.conf ]; then \
+		$(INSTALL_PROGRAM) -m 644 multipath.conf.redhat $(DESTDIR)/etc/multipath.conf; \
+	fi
 
 uninstall:
 	rm $(DESTDIR)/etc/udev/rules.d/multipath.rules
Index: multipath-tools-090724/multipath/multipath.conf.redhat
===================================================================
--- /dev/null
+++ multipath-tools-090724/multipath/multipath.conf.redhat
@@ -0,0 +1,97 @@
+# This is a basic configuration file with some examples, for device mapper
+# multipath.
+# For a complete list of the default configuration values, see
+# /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.defaults
+# For a list of configuration options with descriptions, see
+# /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.annotated
+
+
+# Blacklist all devices by default. Remove this to enable multipathing
+# on the default devices.
+blacklist {
+        devnode "*"
+}
+
+## By default, devices with vendor = "IBM" and product = "S/390.*" are
+## blacklisted. To enable mulitpathing on these devies, uncomment the
+## following lines.
+#blacklist_exceptions {
+#	device {
+#		vendor	"IBM"
+#		product	"S/390.*"
+#	}
+#}
+
+## Use user friendly names, instead of using WWIDs as names.
+defaults {
+	user_friendly_names yes
+}
+##
+## Here is an example of how to configure some standard options.
+##
+#
+#defaults {
+#	udev_dir		/dev
+#	polling_interval 	10
+#	selector		"round-robin 0"
+#	path_grouping_policy	multibus
+#	getuid_callout		"/lib/udev/scsi_id --whitelisted --device=/dev/%n"
+#	prio			alua
+#	path_checker		readsector0
+#	rr_min_io		100
+#	max_fds			8192
+#	rr_weight		priorities
+#	failback		immediate
+#	no_path_retry		fail
+#	user_friendly_names	yes
+#}
+##
+## The wwid line in the following blacklist section is shown as an example
+## of how to blacklist devices by wwid.  The 2 devnode lines are the
+## compiled in default blacklist. If you want to blacklist entire types
+## of devices, such as all scsi devices, you should use a devnode line.
+## However, if you want to blacklist specific devices, you should use
+## a wwid line.  Since there is no guarantee that a specific device will
+## not change names on reboot (from /dev/sda to /dev/sdb for example)
+## devnode lines are not recommended for blacklisting specific devices.
+##
+#blacklist {
+#       wwid 26353900f02796769
+#	devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
+#	devnode "^hd[a-z]"
+#}
+#multipaths {
+#	multipath {
+#		wwid			3600508b4000156d700012000000b0000
+#		alias			yellow
+#		path_grouping_policy	multibus
+#		path_checker		readsector0
+#		path_selector		"round-robin 0"
+#		failback		manual
+#		rr_weight		priorities
+#		no_path_retry		5
+#	}
+#	multipath {
+#		wwid			1DEC_____321816758474
+#		alias			red
+#	}
+#}
+#devices {
+#	device {
+#		vendor			"COMPAQ  "
+#		product			"HSV110 (C)COMPAQ"
+#		path_grouping_policy	multibus
+#		getuid_callout          "/lib/udev/scsi_id --whitelisted --device=/dev/%n"
+#		path_checker		readsector0
+#		path_selector		"round-robin 0"
+#		hardware_handler	"0"
+#		failback		15
+#		rr_weight		priorities
+#		no_path_retry		queue
+#	}
+#	device {
+#		vendor			"COMPAQ  "
+#		product			"MSA1000         "
+#		path_grouping_policy	multibus
+#	}
+#}
Index: multipath-tools-090724/kpartx/Makefile
===================================================================
--- multipath-tools-090724.orig/kpartx/Makefile
+++ multipath-tools-090724/kpartx/Makefile
@@ -20,10 +20,10 @@ $(EXEC): $(OBJS)
 install: $(EXEC) $(EXEC).8
 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)
-	$(INSTALL_PROGRAM) -d $(DESTDIR)$(libudevdir)
-	$(INSTALL_PROGRAM) -m 755 kpartx_id $(DESTDIR)$(libudevdir)
-	$(INSTALL_PROGRAM) -d $(DESTDIR)/etc/udev/rules.d
-	$(INSTALL_PROGRAM) -m 644 kpartx.rules $(DESTDIR)/etc/udev/rules.d/
+#	$(INSTALL_PROGRAM) -d $(DESTDIR)$(libudevdir)
+#	$(INSTALL_PROGRAM) -m 755 kpartx_id $(DESTDIR)$(libudevdir)
+#	$(INSTALL_PROGRAM) -d $(DESTDIR)/etc/udev/rules.d
+#	$(INSTALL_PROGRAM) -m 644 kpartx.rules $(DESTDIR)/etc/udev/rules.d/
 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)
 	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)