Add 0061-RH-display-find-mpaths.patch
* display the find_multipaths value in show config
Add 0062-RH-dont-free-vecs.patch
* don't free the vecs structure on shutdown. It's more pain than
it's worth.
Modify 0015-RH-fix-output-buffer.patch
* Fix memory leak
Add 0048-RH-print-defaults.patch
Add 0049-RH-remove-ID_FS_TYPE.patch
* remove ID_FS_TYPE udev enviroment variable for multipath devices
Add 0051-UP-fix-cli-resize.patch
* check before dereferencing variables
Add 0052-RH-fix-bad-derefs.patch
* setup multipath free the multipath device when it fails, so don't keep
using it.
Add 0053-UP-fix-failback.patch
* setting failback in the devices section was broken
Add 0054-UP-keep-udev-ref.patch
* multipathd needs to keep the same udev object across reconfigures
Add 0055-UP-handle-quiesced-paths.patch
* quiesced paths should be treated as down
Add 0056-UP-alua-prio-fix.patch
* Don't count the preferred bit for paths that are active/optimized
Add 0057-UP-fix-tmo.patch
* Cleanup how multipath sets dev_loss_tmo and fast_io_fail_tmo. Also
make multipath get changing values directly from sysfs, instead of
from udev, which caches them.
Add 0058-UP-fix-failback.patch
* make failback print the default value when you show configs.
Add 0059-UP-flush-failure-queueing.patch
* If you can't flush a multipath device, restore the queue_if_no_paths
value
Add 0060-UP-uevent-loop-udev.patch
* make ueventloop grab it's own udev reference, since it is cancelled
asychnrously.
Add 0044-RHBZ-976688-fix-wipe-wwids.patch
* Seek back to the start of the file after truncating it
Add 0045-RHBZ-977297-man-page-fix.patch
* update man page to match actual defaults
Add 0046-RHBZ-883981-move-udev-rules.patch
* move udev rules file from /lib to /usr/lib
Resolves: bz #883981, #976688, #977297
Add 0038-RHBZ-799860-netapp-config.patch
Add 0039-RH-detect-prio-fix.patch
* Don't autodetect ALUA prioritizer unless it actually can get a priority
Add 0040-RH-bindings-fix.patch
* Do a better job of trying to get the first free user_friendly_name
Add 0041-RH-check-for-erofs.patch
* Don't create/reload a device read-only unless doing it read/write fails
with EROFS
Remove 0017-RH-fix-sigusr1.patch
* fix signal handling upstream way instead
Add 0042-UP-fix-signal-handling.patch
* uxlsnr now handles all the signals sent to multipathd. This makes its
signal handling posix compliant, and harder to mess up.
Add 0043-RH-signal-waiter.patch
* ioctl isn't a pthread cancellation point. Send a signal to the waiter
thread to break out of waiting in ioctl for a dm event.
Add 0032-RHBZ-956464-mpathconf-defaults.patch
* fix defaults listed in usage
Add 0033-RHBZ-829963-e-series-conf.patch
Add 0034-RHBZ-851416-mpathconf-display.patch
* display whether or not multipathd is running in the status
Add 0035-RHBZ-891921-list-mpp.patch
* add a new path format wilcard to list the multipath device associated
with a path
Add 0036-RHBZ-949239-load-multipath-module.patch
* load the dm-multipath kernel module when multipathd starts
Add 0037-RHBZ-768873-fix-rename.patch
* When deciding on a multipth devices name on reload, don't default to
the existing name if there is no config file alias and user_friendly_names
isn't set. Use the wwid.
Modify multipath.conf
Resolves: bz #768873, #950252
Add 0031-RHBZ-957188-kpartx-use-dm-name.patch
* use the basename of the devices that will be created to choose the
delimiter instead of using the device name from the command line
Resolves: bz #957188
Add 0026-fix-checker-time.patch
* Once multipathd hit it max checker interval, it was reverting to
to shortest checker interval
Add 0027-RH-get-wwid.patch
* Multipath wasn't correctly setting the multipath wwid when it read devices
in from the kernel
Add 0028-RHBZ-929078-refresh-udev-dev.patch
* Make multipath try to get the UID of down devices. Also, on ev_add_path,
make multipathd reinitialize existing devices that weren't fully
initialized before.
Add 0021-RHBZ-919119-respect-kernel-cmdline.patch
* keep the multipath.rules udev file from running and multipathd from
starting if nompath is on the kernel command line
Add 0022-RH-multipathd-check-wwids.patch
* Whenever multipath runs configure, it will check the wwids, and
add any missing ones to the wwids file
Add 0023-RH-multipath-wipe-wwid.patch
* multipath's -w command will remove a wwid from the wwids file
Add 0024-RH-multipath-wipe-wwids.patch
* multipath's -W command will set reset the wwids file to just the current
devices
Add 0025-UPBZ-916668_add_maj_min.patch
Resolves: bz #919119
Updated to latest upstrem 0.4.9 code: multipath-tools-130222
(git commit id: 67b82ad6fe280caa1770025a6bb8110b633fa136)
Refresh 0001-RH-dont_start_with_no_config.patch
Modify 0002-RH-multipath.rules.patch
Modify 0003-RH-Make-build-system-RH-Fedora-friendly.patch
Refresh 0004-RH-multipathd-blacklist-all-by-default.patch
Refresh 0005-RH-add-mpathconf.patch
Refresh 0006-RH-add-find-multipaths.patch
Add 0008-RH-revert-partition-changes.patch
Rename 0008-RH-RHEL5-style-partitions.patch to
0009-RH-RHEL5-style-partitions.patch
Rename 0009-RH-dont-remove-map-on-enomem.patch to
0010-RH-dont-remove-map-on-enomem.patch
Rename 0010-RH-deprecate-uid-gid-mode.patch to
0011-RH-deprecate-uid-gid-mode.patch
Rename 0013-RH-kpartx-msg.patch to 0012-RH-kpartx-msg.patch
Rename 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch to
0013-RHBZ-883981-cleanup-rpmdiff-issues.patch
Rename 0039-RH-handle-other-sector-sizes.patch to
0014-RH-handle-other-sector-sizes.patch
Rename 0040-RH-fix-output-buffer.patch to 0015-RH-fix-output-buffer.patch
Add 0016-RH-dont-print-ghost-messages.patch
Add 0017-RH-fix-sigusr1.patch
* Actually this fixes a number of issues related to signals
Rename 0018-RH-remove-config-dups.patch to 0018-RH-fix-factorize.patch
* just the part that isn't upstream
Add 0019-RH-fix-sockets.patch
* makes abstract multipathd a cli sockets use the correct name.
Set find_multipaths in the default config
Add 0034-RHBZ-887737-check-for-null-key.patch
Add 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch
* Compile multipathd with full RELRO and PIE and install to /usr
Add 0033-RH-dont-disable-libdm-failback-for-sync-case.patch
* make kpartx -s and multipath use libdm failback device creation, so
that they work in environments without udev
Add 0026-RH-fix-mpathpersist-fns.patch
Add 0027-RH-default-partition-delimiters.patch
* Only use the -p delimiter when the device name ends in a number
Add 0028-RH-storagetek-config.patch
Add 0029-RH-kpartx-retry.patch
* retry delete on busy loop devices
Add 0030-RH-early-blacklist.patch
* multipath will now blacklist devices by device type and wwid in
store_pathinfo, so that it doesn't do a bunch of unnecessary work
on paths that it would only be removing later on.
Modify 0016-RH-retain_hwhandler.patch
* Check the dm-multipath module version, and don't enable
retain_attached_hw_handler if the kernel doesn't support it
Add 0019-RH-detect-prio.patch
* add detect_prio option, to make multipath check if the device
supports the ALUA prio, before defaulting to the configured prio
Remove 0017-RH-netapp_config.patch
Add 0020-RH-netapp-config.patch
* new netapp config that uses retain_attached_hw_handler and
detect_prio to autoconfigure ALUA and non-ALUA devices.
Add 0014-RH-dm_reassign.patch
* Fix reassign_maps option
Add 0015-RH-selector_change.patch
* devices default to using service-time selector
Add 0016-RH-retain_hwhandler.patch
* add retain_attached_hw_handler option, to let multipath keep an
already attached scsi device handler
Add 0017-RH-netapp_config.patch
Add 0018-RH-remove-config-dups.patch
* Clean up duplicates in the devices and blacklist sections
(git commit id: cb0f7127ba90ab5e8e71fc534a0a16cdbe96a88f)
Add 0001-RH-remove_callout.patch
* multipath no longer uses the getuid callout. It now gets the
wwid from the udev database or the environment variables
Add 0004-RH-fix-cciss-names.patch
* convert cciss device names from cciss/cXdY to sysfs style cciss!cXdY
Split 0009-RH-add-find-multipaths.patch into 0002-RH-add-wwids-file.patch
and 0010-RH-add-find-multipaths.patch
Add 0016-RH-change-configs.patch
* default fast_io_fail to 5 and don't set the path selector in the
builtin configs.
Resolves: bz #831978
Add 0104-RHBZ-737989-systemd-unit-fix.patch
* systemd will only start multipathd if /etc/multipath.conf exists
Add 0105-fix-oom-adj.patch
* first try setting oom_score_adj
Modify 0021-RHBZ-548874-add-find-multipaths.patch
Modify 0022-RHBZ-557845-RHEL5-style-partitions.patch
Add 0025-RHBZ-508827-update-multipathd-manpage.patch through
0101-RHBZ-631009-disable-udev-disk-rules-on-reload.patch
* sync with current state of RHEL6. Next release should include a updated
source tarball with most of these fixes rolled in.
Add 0102-RHBZ-690828-systemd-unit-file.patch
* Add Jóhann B. Guðmundsson's unit file for systemd.
* Add sub-package sysvinit for SysV init script.
Resolves: bz #690828
with 0012-RH-udev-sync-support.patch
Add udev sync support to kpartx and multipath. In kpartx it is disabled
unless you use the -s option. Refresh
0013-RH-add-weighted_prio-prioritizer.patch Refresh
0021-RHBZ-548874-add-find-multipaths.patch Modify
0022-RHBZ-557845-RHEL5-style-partitions.patch
kpartx now creates a 2 sector large device for dos extended partitions,
just like the kernel does on the regular block devices. Add
0023-RHBZ-557810-emc-invista-config.patch Add
0024-RHBZ-565933-checker-timeout.patch
Multipath has a new option checker_timeout. If this is not set, all path
checker functions with explicit timeouts use
/sys/block/sd<x>/device/timeout. If this is set, they use it instead.
0002-RH-path-checker.patch Modify
0010-RH-multipath-rules-udev-changes.patch
Fix udev rules to use DM_SBIN_PATH when calling kpartx
install udev rules to /lib/udev/rules.d instead of /etc/udev/rules.d Modify
0014-RH-add-hp_tur-checker.patch Add
0003-for-upstream-default-configs.patch Add
0016-RHBZ-554561-fix-init-error-msg.patch Add
0017-RHBZ-554592-man-page-note.patch Add
0018-RHBZ-554596-SUN-6540-config.patch Add
0019-RHBZ-554598-fix-multipath-locking.patch Add
0020-RHBZ-554605-fix-manual-failover.patch Add
0021-RHBZ-548874-add-find-multipaths.patch
Added find_multipaths multipath.conf option
Added /sbin/mpathconf for simple editting of multipath.conf Add
0022-RHBZ-557845-RHEL5-style-partitions.patch
Make kpartx deal with logical partitions like it did in RHEL5. Don't create
a dm-device for the extended partition itself. Create the logical
partitions on top of the dm-device for the whole disk.
