Modify 0076-RHBZ-1056686-add-hw_str_match.patch
* free temporary memory used during configuration
Add 0078-RHBZ-1054044-fix-mpathconf-manpage.patch
* fix typo
Add 0079-RHBZ-1070581-add-wwid-option.patch
* add multipath option "-a". To add a device's wwid to the wwids file
Add 0080-RHBZ-1075796-cmdline-wwid.patch
* add multipath option "-A" to add wwids specified by the kernel
command line mapth.wwid options.
Add 0074-RHBZ-1056976-dm-mpath-rules.patch
* Add rules to keep from doing work in udev if there are no
active paths, or if the event was for a multipath device
reloading its table due to a path change.
Add 0075-RHBZ-1056976-reload-flag.patch
* multipath code to identify reloads that the new rules can
ignore
Add 0076-RHBZ-1056686-add-hw_str_match.patch
* add a new default config paramter, "hw_str_match", to make user
device configs only overwrite builtin device configs if the
identifier strings match exactly, like the default in RHEL6.
Modify 0072-RHBZ-1039199-check-loop-control.patch
* only call close on the /dev/loop-control fd the open succeeds
Add 0073-RH-update-build-flags.patch
* fix print call to work with -Werror=format-security compile flag
Add 0072-RHBZ-1039199-check-loop-control.patch
* Make kpartx use LOOP_CTL_GET_FREE and loop-control to find a free
loop device. This will autoload the loop module.
Add 0067-RHBZ-1022899-fix-udev-partition-handling.patch
* Make sure to wipe partition devices on change event if they weren't
wiped on the device add event
Add 0068-RHBZ-1034578-label-partition-devices.patch
* Make sure that partition devices are labeled like the whole device
Add 0069-UPBZ-1033791-improve-rdac-checker.patch
* Use RTPG data in RDAC checker
Add 0070-RHBZ-1036503-blacklist-td-devs.patch
Add 0071-RHBZ-1031546-strip-dev.patch
* make multipathd interactive commands able to handle /dev/<devnode>
instead of just <devnode>
Add 0063-RH-fix-warning.patch
* Fix complier warning
0064-fix-ID_FS-attrs.patch
* make multipath create a timestamp file /run/multipathd/timestamp, and
add -T<timestamp>:<valid> option to shortcut processing if the
timestamp hasn't changed
Add 0061-RH-display-find-mpaths.patch
* display the find_multipaths value in show config
Add 0062-RH-dont-free-vecs.patch
* don't free the vecs structure on shutdown. It's more pain than
it's worth.
Modify 0015-RH-fix-output-buffer.patch
* Fix memory leak
Add 0048-RH-print-defaults.patch
Add 0049-RH-remove-ID_FS_TYPE.patch
* remove ID_FS_TYPE udev enviroment variable for multipath devices
Add 0051-UP-fix-cli-resize.patch
* check before dereferencing variables
Add 0052-RH-fix-bad-derefs.patch
* setup multipath free the multipath device when it fails, so don't keep
using it.
Add 0053-UP-fix-failback.patch
* setting failback in the devices section was broken
Add 0054-UP-keep-udev-ref.patch
* multipathd needs to keep the same udev object across reconfigures
Add 0055-UP-handle-quiesced-paths.patch
* quiesced paths should be treated as down
Add 0056-UP-alua-prio-fix.patch
* Don't count the preferred bit for paths that are active/optimized
Add 0057-UP-fix-tmo.patch
* Cleanup how multipath sets dev_loss_tmo and fast_io_fail_tmo. Also
make multipath get changing values directly from sysfs, instead of
from udev, which caches them.
Add 0058-UP-fix-failback.patch
* make failback print the default value when you show configs.
Add 0059-UP-flush-failure-queueing.patch
* If you can't flush a multipath device, restore the queue_if_no_paths
value
Add 0060-UP-uevent-loop-udev.patch
* make ueventloop grab it's own udev reference, since it is cancelled
asychnrously.
Add 0044-RHBZ-976688-fix-wipe-wwids.patch
* Seek back to the start of the file after truncating it
Add 0045-RHBZ-977297-man-page-fix.patch
* update man page to match actual defaults
Add 0046-RHBZ-883981-move-udev-rules.patch
* move udev rules file from /lib to /usr/lib
Resolves: bz #883981, #976688, #977297
Add 0038-RHBZ-799860-netapp-config.patch
Add 0039-RH-detect-prio-fix.patch
* Don't autodetect ALUA prioritizer unless it actually can get a priority
Add 0040-RH-bindings-fix.patch
* Do a better job of trying to get the first free user_friendly_name
Add 0041-RH-check-for-erofs.patch
* Don't create/reload a device read-only unless doing it read/write fails
with EROFS
Remove 0017-RH-fix-sigusr1.patch
* fix signal handling upstream way instead
Add 0042-UP-fix-signal-handling.patch
* uxlsnr now handles all the signals sent to multipathd. This makes its
signal handling posix compliant, and harder to mess up.
Add 0043-RH-signal-waiter.patch
* ioctl isn't a pthread cancellation point. Send a signal to the waiter
thread to break out of waiting in ioctl for a dm event.
Add 0032-RHBZ-956464-mpathconf-defaults.patch
* fix defaults listed in usage
Add 0033-RHBZ-829963-e-series-conf.patch
Add 0034-RHBZ-851416-mpathconf-display.patch
* display whether or not multipathd is running in the status
Add 0035-RHBZ-891921-list-mpp.patch
* add a new path format wilcard to list the multipath device associated
with a path
Add 0036-RHBZ-949239-load-multipath-module.patch
* load the dm-multipath kernel module when multipathd starts
Add 0037-RHBZ-768873-fix-rename.patch
* When deciding on a multipth devices name on reload, don't default to
the existing name if there is no config file alias and user_friendly_names
isn't set. Use the wwid.
Modify multipath.conf
Resolves: bz #768873, #950252
Add 0031-RHBZ-957188-kpartx-use-dm-name.patch
* use the basename of the devices that will be created to choose the
delimiter instead of using the device name from the command line
Resolves: bz #957188
Add 0026-fix-checker-time.patch
* Once multipathd hit it max checker interval, it was reverting to
to shortest checker interval
Add 0027-RH-get-wwid.patch
* Multipath wasn't correctly setting the multipath wwid when it read devices
in from the kernel
Add 0028-RHBZ-929078-refresh-udev-dev.patch
* Make multipath try to get the UID of down devices. Also, on ev_add_path,
make multipathd reinitialize existing devices that weren't fully
initialized before.
Add 0021-RHBZ-919119-respect-kernel-cmdline.patch
* keep the multipath.rules udev file from running and multipathd from
starting if nompath is on the kernel command line
Add 0022-RH-multipathd-check-wwids.patch
* Whenever multipath runs configure, it will check the wwids, and
add any missing ones to the wwids file
Add 0023-RH-multipath-wipe-wwid.patch
* multipath's -w command will remove a wwid from the wwids file
Add 0024-RH-multipath-wipe-wwids.patch
* multipath's -W command will set reset the wwids file to just the current
devices
Add 0025-UPBZ-916668_add_maj_min.patch
Resolves: bz #919119
Updated to latest upstrem 0.4.9 code: multipath-tools-130222
(git commit id: 67b82ad6fe280caa1770025a6bb8110b633fa136)
Refresh 0001-RH-dont_start_with_no_config.patch
Modify 0002-RH-multipath.rules.patch
Modify 0003-RH-Make-build-system-RH-Fedora-friendly.patch
Refresh 0004-RH-multipathd-blacklist-all-by-default.patch
Refresh 0005-RH-add-mpathconf.patch
Refresh 0006-RH-add-find-multipaths.patch
Add 0008-RH-revert-partition-changes.patch
Rename 0008-RH-RHEL5-style-partitions.patch to
0009-RH-RHEL5-style-partitions.patch
Rename 0009-RH-dont-remove-map-on-enomem.patch to
0010-RH-dont-remove-map-on-enomem.patch
Rename 0010-RH-deprecate-uid-gid-mode.patch to
0011-RH-deprecate-uid-gid-mode.patch
Rename 0013-RH-kpartx-msg.patch to 0012-RH-kpartx-msg.patch
Rename 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch to
0013-RHBZ-883981-cleanup-rpmdiff-issues.patch
Rename 0039-RH-handle-other-sector-sizes.patch to
0014-RH-handle-other-sector-sizes.patch
Rename 0040-RH-fix-output-buffer.patch to 0015-RH-fix-output-buffer.patch
Add 0016-RH-dont-print-ghost-messages.patch
Add 0017-RH-fix-sigusr1.patch
* Actually this fixes a number of issues related to signals
Rename 0018-RH-remove-config-dups.patch to 0018-RH-fix-factorize.patch
* just the part that isn't upstream
Add 0019-RH-fix-sockets.patch
* makes abstract multipathd a cli sockets use the correct name.
Set find_multipaths in the default config
Add 0034-RHBZ-887737-check-for-null-key.patch
Add 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch
* Compile multipathd with full RELRO and PIE and install to /usr
Add 0033-RH-dont-disable-libdm-failback-for-sync-case.patch
* make kpartx -s and multipath use libdm failback device creation, so
that they work in environments without udev
Add 0026-RH-fix-mpathpersist-fns.patch
Add 0027-RH-default-partition-delimiters.patch
* Only use the -p delimiter when the device name ends in a number
Add 0028-RH-storagetek-config.patch
Add 0029-RH-kpartx-retry.patch
* retry delete on busy loop devices
Add 0030-RH-early-blacklist.patch
* multipath will now blacklist devices by device type and wwid in
store_pathinfo, so that it doesn't do a bunch of unnecessary work
on paths that it would only be removing later on.
Modify 0016-RH-retain_hwhandler.patch
* Check the dm-multipath module version, and don't enable
retain_attached_hw_handler if the kernel doesn't support it
Add 0019-RH-detect-prio.patch
* add detect_prio option, to make multipath check if the device
supports the ALUA prio, before defaulting to the configured prio
Remove 0017-RH-netapp_config.patch
Add 0020-RH-netapp-config.patch
* new netapp config that uses retain_attached_hw_handler and
detect_prio to autoconfigure ALUA and non-ALUA devices.
Add 0014-RH-dm_reassign.patch
* Fix reassign_maps option
Add 0015-RH-selector_change.patch
* devices default to using service-time selector
Add 0016-RH-retain_hwhandler.patch
* add retain_attached_hw_handler option, to let multipath keep an
already attached scsi device handler
Add 0017-RH-netapp_config.patch
Add 0018-RH-remove-config-dups.patch
* Clean up duplicates in the devices and blacklist sections
(git commit id: cb0f7127ba90ab5e8e71fc534a0a16cdbe96a88f)
Add 0001-RH-remove_callout.patch
* multipath no longer uses the getuid callout. It now gets the
wwid from the udev database or the environment variables
Add 0004-RH-fix-cciss-names.patch
* convert cciss device names from cciss/cXdY to sysfs style cciss!cXdY
Split 0009-RH-add-find-multipaths.patch into 0002-RH-add-wwids-file.patch
and 0010-RH-add-find-multipaths.patch
Add 0016-RH-change-configs.patch
* default fast_io_fail to 5 and don't set the path selector in the
builtin configs.
Resolves: bz #831978
Add 0104-RHBZ-737989-systemd-unit-fix.patch
* systemd will only start multipathd if /etc/multipath.conf exists
Add 0105-fix-oom-adj.patch
* first try setting oom_score_adj
