Update Source to upstream version 0.8.0
* Previous patches 0006 & 0007 are included in this commit
Rename files
* Previous patches 0008-0016 & 0100 are now patches 0018-0027
Add 0006-multipathd-Fix-miscounting-active-paths.patch
Add 0007-multipathd-ignore-failed-wwid-recheck.patch
* multipathd will no longer disable paths if it is unable to
get their wwid on a change event
Add 0008-libmutipath-continue-to-use-old-state-on-PATH_PENDIN.patch
Add 0009-multipathd-use-update_path_groups-instead-of-reload_.patch
Add 0010-multipath.conf-add-missing-options-to-man-page.patch
Add 0011-libmultipath-add-get_uid-fallback-code-for-NVMe-devi.patch
Add 0012-libmulitpath-cleanup-uid_fallback-code.patch
Add 0013-multipathd-handle-changed-wwids-by-removal-and-addit.patch
* if a path device changes wwid, it will now be removed and re-added
to the correct multipath device.
Add 0014-multipathd-remove-wwid_changed-path-attribute.patch
Add 0015-multipathd-ignore-disable_changed_wwids.patch
Add 0016-multipathd-Don-t-use-fallback-code-after-getting-wwi.patch
Add 0017-libmultipath-silence-dm_is_mpath-error-messages.patch
* The above 12 patches have been submitted upstream
Update Source to latest upstream commit
* previous patch 0001-libmultipath-dm_is_mpath-cleanup.patch is
included in this commit
Rename files
* Previous patches 0002-0009 are now patches 0006-0013
Add 0001-BZ-1668693-disable-user_friendly_names-for-NetApp.patch
Add 0002-libmultipath-handle-existing-paths-in-marginal_path-.patch
Add 0003-multipathd-cleanup-marginal-paths-checking-timers.patch
Add 0004-libmultipath-fix-marginal-paths-queueing-errors.patch
Add 0005-libmultipath-fix-marginal_paths-nr_active-check.patch
* The above 5 patches have been submitted upstream
Add 0014-RH-Fix-nvme-compilation-warning.patch
* This change is only necessary because of Red Hat compilation
differences.
Update Source to latest upstream commit
* Previous patches 0001-0003 are included in this version
Rename files
* Previous patches 0004-0011 are now patches 0002-0009
Add 0001-libmultipath-dm_is_mpath-cleanup.patch
* This patch has been submitted upstream
Update Source to upstream version 0.7.9
* Previous patches 0001-0006 are included in this version
Rename files
* Previous patches 0007-0014 are now patches 0004-0011
Add 0001-multipathd-fix-mpp-hwe-handling-when-paths-are-freed.patch
Add 0002-libmultipath-cleanup-pthread_cleanup_pop-call.patch
Add 0003-libmultipath-fix-false-removes-in-dmevents-polling-c.patch
* The above 3 patches have been submitted upstream
Update Source to upstream version 0.7.8
* Previous patches 0001-0020 are included in this version
Rename files
* Previous patches 0021-0025 are now patches 0001-0005
* Previous patches 0026-0033 are now patches 0007-0014
Add 0006-libmultipath-timeout-on-unresponsive-tur-thread.patch
* has been submitted upstream
Add Conflicts for mdadm < 4.1-rc2.0.2 and udisks2 < 2.8.0-2
* Multipath udev rule update from 0.7.7-1 is incompatible with older
versions of these packages (bz #1628192)
Update Source to latest upstream commit
* Previous patches 0001-0018 are included in this commit
Rename files
* Previous patches 0019-0028 are now patches 0002-0003 & 0012-0019
Add 0001-libmultipath-remove-last-of-rbd-code.patch
Add 0004-mpathpersist-add-param-alltgpt-option.patch
* mpathpersist now accepts --param-alltgpt
Add 0005-libmutipath-remove-unused-IDE-bus-type.patch
Add 0006-multipathd-add-new-protocol-path-wildcard.patch
* multipathd show paths format now accepts %P for the path
* protocol/transport
Add 0007-libmultipath-add-protocol-blacklist-option.patch
* You can now use the "protocol" blacklist section parameter to
* blacklist
by protocol/transport
Add 0008-libmultipath-remove-_filter_-blacklist-functions.patch
Add 0009-multipath-tests-change-to-work-with-old-make-version.patch
Add 0010-multipath-tests-add-blacklist-tests.patch
Add 0011-mpathpersist-add-missing-param-rk-usage-info.patch
Refresh 0013-RH-Remove-the-property-blacklist-exception-builtin.patch
Modify 0016-RH-add-mpathconf.patch
* improve usage message and man page
None of currently supported distributions need that.
Last one was EL5 which is EOL for a while.
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
Update Source to the latest upstream commit
* Previous patches 0001 and 0010-0013 are included in this commit.
Add 0001-libmultipath-update-3PARdata-builtin-config.patch
* Change for building configuration. Posted upstream
Modify 0006-RH-use-rpm-optflags-if-present.patch
* Add missing lines to actually use RPM_OPT_FLAGS.
- Update Source to the latest upstream commit
- Add 0001-libmultipath-add-comment-about-resuming.patch
* posted upstream
- Add 0002-multipath-attempt-at-common-multipath.rules.patch
* under discussion upstream
- Add 0003-RH-fixup-udev-rules-for-redhat.patch
* Redhat uses different udev rules that some other distros, so multipath
has run at a different time. Not all upstream distros link /sbin and
/usr/sbin either.
- Add 0004-RH-Remove-the-property-blacklist-exception-builtin.patch
* Allow multipath to be used on devices without multiple paths. NAK'ed
upstream, but requested by Red Hat
- Add 0005-RH-don-t-start-without-a-config-file.patch
* Don't start multipath unless a config file exists. NAK'ed upstream,
but requested by Red Hat
- Add 0006-RH-use-rpm-optflags-if-present.patch
* Make the build system fedora friendly
- Add 0007-RH-add-mpathconf.patch
* Add tool to help configure multipath with Red Hat defaults.
- Add 0008-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch
* Make multipath able to claim devices based on the kernel command line
NAK'ed upstream but requested by Red Hat
- Add 0009-RH-trigger-change-uevent-on-new-device-creation.patch
* under discussion upstream
Remove Epoch from device-mapper requires
* The RHEL releases of device-mapper set the Epoch, and this was
accidentally retained in the fedora spec file.
Modify 0136-RHBZ-1304687-wait-for-map-add.patch
* switch to missing_uev_wait_timeout to stop waiting for uev
Refresh 0137-RHBZ-1280524-clear-chkr-msg.patch
Refresh 0150-RHBZ-1253913-fix-startup-msg.patch
Refresh 0154-UPBZ-1291406-disable-reinstate.patch
Refresh 0156-UPBZ-1313324-dont-fail-discovery.patch
Refresh 0161-RHBZ-1311659-no-kpartx.patch
Refresh 0167-RHBZ-1335176-fix-show-cmds.patch
Add 0173-RH-update-man-page.patch
Add 0174-RHBZ-1362396-modprobe.patch
* make starting the multipathd service modprobe dm-multipath in the
sysvinit scripts
Add 0175-RHBZ-1357382-ordering.patch
* force multipathd.service to start after systemd-udev-trigger.service
Add 0176-RHBZ-1363830-fix-rename.patch
* initialized a variable to make dm_rename not fail randomly
Add 0177-libmultipath-correctly-initialize-pp-sg_id.patch
* This and all the following patches add the rbd patch checker
Add 0178-libmultipath-add-rbd-discovery.patch
Add 0179-multipath-tools-add-checker-callout-to-repair-path.patch
Add 0180-multipath-tools-Add-rbd-checker.patch
Add 0181-multipath-tools-Add-rbd-to-the-hwtable.patch
Add 0182-multipath-tools-check-for-initialized-checker-before.patch
Add 0183-multipathd-Don-t-call-repair-on-blacklisted-path.patch
Add 0184-rbd-fix-sync-repair-support.patch
Add 0185-rbd-check-for-nonshared-clients.patch
Add 0186-rbd-check-for-exclusive-lock-enabled.patch
Add 0187-rbd-fixup-log-messages.patch
Add 0188-RHBZ-1368501-dont-exit.patch
* make multipathd not exit if it encounters recoverable errors on startup
Add 0189-RHBZ-1368211-remove-retries.patch
* add "remove_retries" multipath.conf parameter to make multiple attempts
to remove a multipath device if it is busy.
Add 0190-RHBZ-1380602-rbd-lock-on-read.patch
* pass lock_on_read when remapping image
Add 0191-RHBZ-1169168-disable-changed-paths.patch
* add "disabled_changed_wwids" multipath.conf parameter to disable
paths whose wwid changes
Add 0192-RHBZ-1362409-infinibox-config.patch
Add 0194-RHBZ-1351964-kpartx-recurse.patch
* fix recursion on corrupt dos partitions
Add 0195-RHBZ-1359510-no-daemon-msg.patch
* print a messages when multipathd isn't running
Add 0196-RHBZ-1239173-dont-set-flag.patch
* don't set reload flag on reloads when you gain your first
valid path
Add 0197-RHBZ-1394059-max-sectors-kb.patch
* add "max_sectors_kb" multipath.conf parameter to set max_sectors_kb
on a multipath device and all its path devices
Add 0198-RHBZ-1372032-detect-path-checker.patch
* add "detect_checker" multipath.conf parameter to detect ALUA arrays
and set the path checker to TUR
Add 0199-RHBZ-1279355-3pardata-config.patch
Add 0200-RHBZ-1402092-orphan-status.patch
* clear status on orphan paths
Add 0201-RHBZ-1403552-silence-warning.patch
Add 0202-RHBZ-1362120-skip-prio.patch
* don't run prio on failed paths
Add 0203-RHBZ-1363718-add-msgs.patch
Add 0204-RHBZ-1406226-nimble-config.patch
Add 0205-RHBZ-1416569-reset-stats.patch
* add "reset maps stats" and "reset map <map> stats" multipathd
interactive commands to reset the stats tracked by multipathd
Add 0206-RHBZ-1239173-pt2-no-paths.patch
* make multipath correctly disable scanning and rules running when
it gets a uevent and there are not valid paths.
Add 0207-UP-add-libmpathcmd.patch
* New shared library, libmpathcmd, that sends and receives messages from
multipathd. device-mapper-multipath now uses this library internally.
Add 0208-UPBZ-1430097-multipathd-IPC-changes.patch
* validation that modifying commands are coming from root.
Add 0209-UPBZ-1430097-multipath-C-API.patch
* New shared library. libdmmp, that presents the information from multipathd
in a structured manner to make it easier for callers to use
Add 0210-RH-fix-uninstall.patch
* Minor compilation fixes
Add 0211-RH-strlen-fix.patch
* checks that variables are not NULL before passing them to strlen
Add 0212-RHBZ-1431562-for-read-only.patch
Make 3 new subpackages
* device-mapper-multipath-devel, libdmmp, and libdmmp-devel. libmpathcmd
and libmpathprio are in device-mapper-multipath-libs and
device-mapper-multipath-devel. libdmmp is in its own subpackages
Move libmpathprio devel files to device-mapper-multipath-devel
Added BuildRequires on librados2-devel
