Update Source to upstream version 0.8.0
* Previous patches 0006 & 0007 are included in this commit
Rename files
* Previous patches 0008-0016 & 0100 are now patches 0018-0027
Add 0006-multipathd-Fix-miscounting-active-paths.patch
Add 0007-multipathd-ignore-failed-wwid-recheck.patch
* multipathd will no longer disable paths if it is unable to
get their wwid on a change event
Add 0008-libmutipath-continue-to-use-old-state-on-PATH_PENDIN.patch
Add 0009-multipathd-use-update_path_groups-instead-of-reload_.patch
Add 0010-multipath.conf-add-missing-options-to-man-page.patch
Add 0011-libmultipath-add-get_uid-fallback-code-for-NVMe-devi.patch
Add 0012-libmulitpath-cleanup-uid_fallback-code.patch
Add 0013-multipathd-handle-changed-wwids-by-removal-and-addit.patch
* if a path device changes wwid, it will now be removed and re-added
to the correct multipath device.
Add 0014-multipathd-remove-wwid_changed-path-attribute.patch
Add 0015-multipathd-ignore-disable_changed_wwids.patch
Add 0016-multipathd-Don-t-use-fallback-code-after-getting-wwi.patch
Add 0017-libmultipath-silence-dm_is_mpath-error-messages.patch
* The above 12 patches have been submitted upstream
Update Source to latest upstream commit
* previous patch 0001-libmultipath-dm_is_mpath-cleanup.patch is
included in this commit
Rename files
* Previous patches 0002-0009 are now patches 0006-0013
Add 0001-BZ-1668693-disable-user_friendly_names-for-NetApp.patch
Add 0002-libmultipath-handle-existing-paths-in-marginal_path-.patch
Add 0003-multipathd-cleanup-marginal-paths-checking-timers.patch
Add 0004-libmultipath-fix-marginal-paths-queueing-errors.patch
Add 0005-libmultipath-fix-marginal_paths-nr_active-check.patch
* The above 5 patches have been submitted upstream
Add 0014-RH-Fix-nvme-compilation-warning.patch
* This change is only necessary because of Red Hat compilation
differences.
Update Source to latest upstream commit
* Previous patches 0001-0003 are included in this version
Rename files
* Previous patches 0004-0011 are now patches 0002-0009
Add 0001-libmultipath-dm_is_mpath-cleanup.patch
* This patch has been submitted upstream
Update Source to upstream version 0.7.9
* Previous patches 0001-0006 are included in this version
Rename files
* Previous patches 0007-0014 are now patches 0004-0011
Add 0001-multipathd-fix-mpp-hwe-handling-when-paths-are-freed.patch
Add 0002-libmultipath-cleanup-pthread_cleanup_pop-call.patch
Add 0003-libmultipath-fix-false-removes-in-dmevents-polling-c.patch
* The above 3 patches have been submitted upstream
Update Source to upstream version 0.7.8
* Previous patches 0001-0020 are included in this version
Rename files
* Previous patches 0021-0025 are now patches 0001-0005
* Previous patches 0026-0033 are now patches 0007-0014
Add 0006-libmultipath-timeout-on-unresponsive-tur-thread.patch
* has been submitted upstream
Update Source to latest upstream commit
* Previous patches 0001-0018 are included in this commit
Rename files
* Previous patches 0019-0028 are now patches 0002-0003 & 0012-0019
Add 0001-libmultipath-remove-last-of-rbd-code.patch
Add 0004-mpathpersist-add-param-alltgpt-option.patch
* mpathpersist now accepts --param-alltgpt
Add 0005-libmutipath-remove-unused-IDE-bus-type.patch
Add 0006-multipathd-add-new-protocol-path-wildcard.patch
* multipathd show paths format now accepts %P for the path
* protocol/transport
Add 0007-libmultipath-add-protocol-blacklist-option.patch
* You can now use the "protocol" blacklist section parameter to
* blacklist
by protocol/transport
Add 0008-libmultipath-remove-_filter_-blacklist-functions.patch
Add 0009-multipath-tests-change-to-work-with-old-make-version.patch
Add 0010-multipath-tests-add-blacklist-tests.patch
Add 0011-mpathpersist-add-missing-param-rk-usage-info.patch
Refresh 0013-RH-Remove-the-property-blacklist-exception-builtin.patch
Modify 0016-RH-add-mpathconf.patch
* improve usage message and man page
Update Source to the latest upstream commit
* Previous patches 0001 and 0010-0013 are included in this commit.
Add 0001-libmultipath-update-3PARdata-builtin-config.patch
* Change for building configuration. Posted upstream
Modify 0006-RH-use-rpm-optflags-if-present.patch
* Add missing lines to actually use RPM_OPT_FLAGS.
- Update Source to the latest upstream commit
- Add 0001-libmultipath-add-comment-about-resuming.patch
* posted upstream
- Add 0002-multipath-attempt-at-common-multipath.rules.patch
* under discussion upstream
- Add 0003-RH-fixup-udev-rules-for-redhat.patch
* Redhat uses different udev rules that some other distros, so multipath
has run at a different time. Not all upstream distros link /sbin and
/usr/sbin either.
- Add 0004-RH-Remove-the-property-blacklist-exception-builtin.patch
* Allow multipath to be used on devices without multiple paths. NAK'ed
upstream, but requested by Red Hat
- Add 0005-RH-don-t-start-without-a-config-file.patch
* Don't start multipath unless a config file exists. NAK'ed upstream,
but requested by Red Hat
- Add 0006-RH-use-rpm-optflags-if-present.patch
* Make the build system fedora friendly
- Add 0007-RH-add-mpathconf.patch
* Add tool to help configure multipath with Red Hat defaults.
- Add 0008-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch
* Make multipath able to claim devices based on the kernel command line
NAK'ed upstream but requested by Red Hat
- Add 0009-RH-trigger-change-uevent-on-new-device-creation.patch
* under discussion upstream
Updated to latest upstrem 0.4.9 code: multipath-tools-130222
(git commit id: 67b82ad6fe280caa1770025a6bb8110b633fa136)
Refresh 0001-RH-dont_start_with_no_config.patch
Modify 0002-RH-multipath.rules.patch
Modify 0003-RH-Make-build-system-RH-Fedora-friendly.patch
Refresh 0004-RH-multipathd-blacklist-all-by-default.patch
Refresh 0005-RH-add-mpathconf.patch
Refresh 0006-RH-add-find-multipaths.patch
Add 0008-RH-revert-partition-changes.patch
Rename 0008-RH-RHEL5-style-partitions.patch to
0009-RH-RHEL5-style-partitions.patch
Rename 0009-RH-dont-remove-map-on-enomem.patch to
0010-RH-dont-remove-map-on-enomem.patch
Rename 0010-RH-deprecate-uid-gid-mode.patch to
0011-RH-deprecate-uid-gid-mode.patch
Rename 0013-RH-kpartx-msg.patch to 0012-RH-kpartx-msg.patch
Rename 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch to
0013-RHBZ-883981-cleanup-rpmdiff-issues.patch
Rename 0039-RH-handle-other-sector-sizes.patch to
0014-RH-handle-other-sector-sizes.patch
Rename 0040-RH-fix-output-buffer.patch to 0015-RH-fix-output-buffer.patch
Add 0016-RH-dont-print-ghost-messages.patch
Add 0017-RH-fix-sigusr1.patch
* Actually this fixes a number of issues related to signals
Rename 0018-RH-remove-config-dups.patch to 0018-RH-fix-factorize.patch
* just the part that isn't upstream
Add 0019-RH-fix-sockets.patch
* makes abstract multipathd a cli sockets use the correct name.
Set find_multipaths in the default config
(git commit id: cb0f7127ba90ab5e8e71fc534a0a16cdbe96a88f)
Add 0001-RH-remove_callout.patch
* multipath no longer uses the getuid callout. It now gets the
wwid from the udev database or the environment variables
Add 0004-RH-fix-cciss-names.patch
* convert cciss device names from cciss/cXdY to sysfs style cciss!cXdY
Split 0009-RH-add-find-multipaths.patch into 0002-RH-add-wwids-file.patch
and 0010-RH-add-find-multipaths.patch
Add 0016-RH-change-configs.patch
* default fast_io_fail to 5 and don't set the path selector in the
builtin configs.
Resolves: bz #831978
