device-mapper-multipath-0.7.1-2.gitf21166a

Modify 0004-RH-Remove-the-property-blacklist-exception-builtin.patch
  * update multipath.conf.5 man page to remove builtin listing
Modify 0005-RH-don-t-start-without-a-config-file.patch
  * update multipathd.8 man page to note that a config file is necessary
Modify 0007-RH-add-mpathconf.patch
  * add property blacklist-exception to default config file
Add 0010-libmultipath-change-how-RADOS-checker-is-enabled.patch
  * Makefile now autodetects librados. Posted upstream
Remove related RADOS option from spec file
Add 0011-multipath-set-verbosity-to-default-during-config.patch
  * Allow multipath to print warning messages during configuration.
    Posted upstream
Add 0012-mpath-skip-device-configs-without-vendor-product.patch
  * device entries without vendor/product were breaking configurations.
    Posted upsteam
Add 0013-multipathd-fix-show-maps-json-crash.patch
  * multipathd crashed showing json output with no devices. Posted
    upstream

0004-RH-Remove-the-property-blacklist-exception-builtin.patch

@@ -14,7 +14,8 @@ it.
 Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
 ---
  libmultipath/blacklist.c   | 15 ++++++---------
- 1 file changed, 6 insertions(+), 9 deletions(-)
+ multipath/multipath.conf.5 |  4 ----
+ 2 files changed, 6 insertions(+), 13 deletions(-)
 
 diff --git a/libmultipath/blacklist.c b/libmultipath/blacklist.c
 index ee396e2..19d4697 100644
@@ -49,6 +50,21 @@ index ee396e2..19d4697 100644
  }
  
  void
+diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
+index f04ff19..fbbbb27 100644
+--- a/multipath/multipath.conf.5
++++ b/multipath/multipath.conf.5
+@@ -1014,10 +1014,6 @@ The \fIWorld Wide Identification\fR of a device.
+ .TP
+ .B property
+ Regular expression of the udev property to be whitelisted.
+-.RS
+-.TP
+-The default is: \fB(SCSI_IDENT_|ID_WWN)\fR
+-.RE
+ .TP
+ .B device
+ Subsection for the device description. This subsection recognizes the
 -- 
 2.7.4
 

0005-RH-don-t-start-without-a-config-file.patch

@@ -15,8 +15,9 @@ Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
  libmultipath/config.c         | 17 +++++++++++++++++
  libmultipath/config.h         |  1 +
  multipath/multipath.rules     |  1 +
+ multipathd/multipathd.8       |  2 ++
  multipathd/multipathd.service |  1 +
- 4 files changed, 20 insertions(+)
+ 5 files changed, 22 insertions(+)
 
 diff --git a/libmultipath/config.c b/libmultipath/config.c
 index bb6619b..aae69b8 100644
@@ -77,6 +78,19 @@ index 4d78b98..5753766 100644
  
  KERNEL=="dm-*", GOTO="check_kpartx"
  ENV{DEVTYPE}!="partition", GOTO="test_dev"
+diff --git a/multipathd/multipathd.8 b/multipathd/multipathd.8
+index 4c765af..c1499a5 100644
+--- a/multipathd/multipathd.8
++++ b/multipathd/multipathd.8
+@@ -39,6 +39,8 @@ map regains its maximum performance and redundancy.
+ This daemon executes the external \fBmultipath\fR tool when events occur.
+ In turn, the multipath tool signals the multipathd daemon when it is done with
+ devmap reconfiguration, so that it can refresh its failed path list.
++
++In this Linux distribution, multipathd does not run unless a /etc/multipath.conffile exists
+ .
+ .
+ .\" ----------------------------------------------------------------------------
 diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service
 index fd66cf6..fafd088 100644
 --- a/multipathd/multipathd.service

0007-RH-add-mpathconf.patch

@@ -14,9 +14,9 @@ Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
 ---
  libmultipath/config.c |   1 +
  multipath/Makefile    |   5 +
- multipath/mpathconf   | 460 ++++++++++++++++++++++++++++++++++++++++++++++++++
+ multipath/mpathconf   | 464 ++++++++++++++++++++++++++++++++++++++++++++++++++
  multipath/mpathconf.8 | 101 +++++++++++
- 4 files changed, 567 insertions(+)
+ 4 files changed, 571 insertions(+)
  create mode 100644 multipath/mpathconf
  create mode 100644 multipath/mpathconf.8
 
@@ -68,10 +68,10 @@ index 1e9ee4b..3d4d459 100644
  	$(RM) core *.o $(EXEC) *.gz
 diff --git a/multipath/mpathconf b/multipath/mpathconf
 new file mode 100644
-index 0000000..c232ae9
+index 0000000..e839134
 --- /dev/null
 +++ b/multipath/mpathconf
-@@ -0,0 +1,460 @@
+@@ -0,0 +1,464 @@
 +#!/bin/bash
 +#
 +# Copyright (C) 2010 Red Hat, Inc. All rights reserved.
@@ -106,6 +106,10 @@ index 0000000..c232ae9
 +defaults {
 +	user_friendly_names yes
 +	find_multipaths yes
++}
++
++blacklist_exceptions {
++        property \"(SCSI_IDENT_|ID_WWN)\"
 +}"
 +
 +CONFIGFILE="/etc/multipath.conf"

0010-libmultipath-change-how-RADOS-checker-is-enabled.patch

@@ -0,0 +1,56 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Benjamin Marzinski <bmarzins@redhat.com>
+Date: Fri, 26 May 2017 17:52:57 -0500
+Subject: [PATCH] libmultipath: change how RADOS checker is enabled
+
+Instead of making the user call "make", "make install" and "make clean"
+with ENABLE_RADOS set correctly, have the makefile check if
+/usr/include/rados/librados.h exists, just like it checks if specific
+functions exist in a file.
+
+Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
+---
+ Makefile.inc                   | 13 +++++++++++++
+ libmultipath/checkers/Makefile |  3 ++-
+ 2 files changed, 15 insertions(+), 1 deletion(-)
+
+diff --git a/Makefile.inc b/Makefile.inc
+index ffcc8b6..ecac8eb 100644
+--- a/Makefile.inc
++++ b/Makefile.inc
+@@ -115,5 +115,18 @@ check_func =								       \
+ 	echo "$$found"							       \
+     )
+ 
++# Checker whether a file with name $1 exists
++check_file = $(shell	\
++	if [ -f "$1" ]; then \
++		found=1; \
++		status="yes"; \
++	else \
++		found=0; \
++		status="no"; \
++	fi; \
++	echo 1>&2 "Checking if $1 exists ... $$status"; \
++	echo "$$found" \
++	)
++
+ %.o:	%.c
+ 	$(CC) $(CFLAGS) -c -o $@ $<
+diff --git a/libmultipath/checkers/Makefile b/libmultipath/checkers/Makefile
+index 732ca9d..bce6b8b 100644
+--- a/libmultipath/checkers/Makefile
++++ b/libmultipath/checkers/Makefile
+@@ -14,7 +14,8 @@ LIBS= \
+ 	libcheckemc_clariion.so \
+ 	libcheckhp_sw.so \
+ 	libcheckrdac.so
+-ifneq ($(ENABLE_RADOS),0)
++
++ifneq ($(call check_file,/usr/include/rados/librados.h),0)
+ LIBS += libcheckrbd.so
+ endif
+ 
+-- 
+2.7.4
+

0011-multipath-set-verbosity-to-default-during-config.patch

@@ -0,0 +1,40 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Benjamin Marzinski <bmarzins@redhat.com>
+Date: Wed, 31 May 2017 15:03:02 -0500
+Subject: [PATCH] multipath: set verbosity to default during config
+
+condlog was setting the verbosity to 0 if there was no configuration.
+This keeps multipath from printing warning messages about config file
+problems that are found while loading the configuration. Instead, it
+should use the default config level until it loads the configuration
+to find the current value.
+
+Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
+---
+ libmultipath/debug.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/libmultipath/debug.c b/libmultipath/debug.c
+index fbe171a..f89b264 100644
+--- a/libmultipath/debug.c
++++ b/libmultipath/debug.c
+@@ -11,6 +11,7 @@
+ #include "../third-party/valgrind/drd.h"
+ #include "vector.h"
+ #include "config.h"
++#include "defaults.h"
+ 
+ void dlog (int sink, int prio, const char * fmt, ...)
+ {
+@@ -21,7 +22,7 @@ void dlog (int sink, int prio, const char * fmt, ...)
+ 	va_start(ap, fmt);
+ 	conf = get_multipath_config();
+ 	ANNOTATE_IGNORE_READS_BEGIN();
+-	thres = (conf) ? conf->verbosity : 0;
++	thres = (conf) ? conf->verbosity : DEFAULT_VERBOSITY;
+ 	ANNOTATE_IGNORE_READS_END();
+ 	put_multipath_config(conf);
+ 
+-- 
+2.7.4
+

0012-mpath-skip-device-configs-without-vendor-product.patch

@@ -0,0 +1,37 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Benjamin Marzinski <bmarzins@redhat.com>
+Date: Wed, 31 May 2017 17:58:59 -0500
+Subject: [PATCH] mpath: skip device configs without vendor/product
+
+Right now if multipath.conf includes a device configuration without a
+vendor or product string, it will automatically be applied to all
+devices, skipping all other configs entirely.  This is clearly wrong.
+This patch makes sure that user added configs include vendor and
+product strings
+
+Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
+---
+ libmultipath/config.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/libmultipath/config.c b/libmultipath/config.c
+index c485748..bdde113 100644
+--- a/libmultipath/config.c
++++ b/libmultipath/config.c
+@@ -452,6 +452,13 @@ restart:
+ 			break;
+ 		j = n;
+ 		vector_foreach_slot_after(hw, hwe2, j) {
++			/* drop invalid device configs */
++			if (!hwe2->vendor || !hwe2->product) {
++				condlog(0, "device config missing vendor or product parameter");
++				vector_del_slot(hw, j--);
++				free_hwe(hwe2);
++				continue;
++			}
+ 			if (hwe_regmatch(hwe1, hwe2))
+ 				continue;
+ 			/* dup */
+-- 
+2.7.4
+

0013-multipathd-fix-show-maps-json-crash.patch

@@ -0,0 +1,38 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Benjamin Marzinski <bmarzins@redhat.com>
+Date: Thu, 1 Jun 2017 17:52:28 -0500
+Subject: [PATCH] multipathd: fix "show maps json" crash
+
+If there are no multipath devices, show_maps_json sets the maximum size
+of the reply buffer to 0. Having a size of 0 causes the calls to calloc
+and realloc to behave in ways that the code isn't designed to handle,
+leading to a double-free crash. Instead, show_maps_json should just
+use the INITIAL_REPLY_LEN if there are no multipath devices.
+
+Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
+---
+ multipathd/cli_handlers.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/multipathd/cli_handlers.c b/multipathd/cli_handlers.c
+index 04c7386..7b0d00c 100644
+--- a/multipathd/cli_handlers.c
++++ b/multipathd/cli_handlers.c
+@@ -162,10 +162,12 @@ show_maps_json (char ** r, int * len, struct vectors * vecs)
+ 	struct multipath * mpp;
+ 	char * c;
+ 	char * reply;
+-	unsigned int maxlen = INITIAL_REPLY_LEN *
+-			PRINT_JSON_MULTIPLIER * VECTOR_SIZE(vecs->mpvec);
++	unsigned int maxlen = INITIAL_REPLY_LEN;
+ 	int again = 1;
+ 
++	if (VECTOR_SIZE(vecs->mpvec) > 0)
++		maxlen *= PRINT_JSON_MULTIPLIER * VECTOR_SIZE(vecs->mpvec);
++
+ 	vector_foreach_slot(vecs->mpvec, mpp, i) {
+ 		if (update_multipath(vecs, mpp->alias, 0)) {
+ 			return 1;
+-- 
+2.7.4
+

device-mapper-multipath.spec

@@ -1,7 +1,7 @@
 Summary: Tools to manage multipath devices using device-mapper
 Name: device-mapper-multipath
 Version: 0.7.1
-Release: 1.gitf21166a%{?dist}
+Release: 2.gitf21166a%{?dist}
 License: GPL+
 Group: System Environment/Base
 URL: http://christophe.varoqui.free.fr/
@@ -20,6 +20,10 @@ Patch0006: 0006-RH-use-rpm-optflags-if-present.patch
 Patch0007: 0007-RH-add-mpathconf.patch
 Patch0008: 0008-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch
 Patch0009: 0009-RH-trigger-change-uevent-on-new-device-creation.patch
+Patch0010: 0010-libmultipath-change-how-RADOS-checker-is-enabled.patch
+Patch0011: 0011-multipath-set-verbosity-to-default-during-config.patch
+Patch0012: 0012-mpath-skip-device-configs-without-vendor-product.patch
+Patch0013: 0013-multipathd-fix-show-maps-json-crash.patch
 
 # runtime
 Requires: %{name}-libs = %{version}-%{release}
@@ -117,19 +121,18 @@ device-mapper-multipath's libdmmp C API library
 %patch0007 -p1
 %patch0008 -p1
 %patch0009 -p1
+%patch0010 -p1
+%patch0011 -p1
+%patch0012 -p1
+%patch0013 -p1
 cp %{SOURCE1} .
 
 %build
-%ifarch x86_64
-  %define _rados 1
-%else
-  %define _rados 0
-%endif
 %define _sbindir /usr/sbin
 %define _libdir /usr/%{_lib}
 %define _libmpathdir %{_libdir}/multipath
 %define _pkgconfdir %{_libdir}/pkgconfig
-make %{?_smp_mflags} LIB=%{_lib} ENABLE_RADOS=%{_rados}
+make %{?_smp_mflags} LIB=%{_lib}
 
 %install
 make install \
@@ -140,8 +143,7 @@ make install \
 	rcdir=%{_initrddir} \
 	unitdir=%{_unitdir} \
 	includedir=%{_includedir} \
-	pkgconfdir=%{_pkgconfdir} \
+	pkgconfdir=%{_pkgconfdir}
-	ENABLE_RADOS=%{_rados}
 
 # tree fix up
 install -d %{buildroot}/etc/multipath
@@ -256,6 +258,26 @@ fi
 %{_pkgconfdir}/libdmmp.pc
 
 %changelog
+* Fri Jun  2 2017 Benjamin Marzinski <bmarzins@redhat.com> 0.7.1-2.gitf21166a
+- Modify 0004-RH-Remove-the-property-blacklist-exception-builtin.patch
+  * update multipath.conf.5 man page to remove builtin listing
+- Modify 0005-RH-don-t-start-without-a-config-file.patch
+  * update multipathd.8 man page to note that a config file is necessary
+- Modify 0007-RH-add-mpathconf.patch
+  * add property blacklist-exception to default config file
+- Add 0010-libmultipath-change-how-RADOS-checker-is-enabled.patch
+  * Makefile now autodetects librados. Posted upstream
+- Remove related RADOS option from spec file
+- Add 0011-multipath-set-verbosity-to-default-during-config.patch
+  * Allow multipath to print warning messages during configuration.
+    Posted upstream
+- Add 0012-mpath-skip-device-configs-without-vendor-product.patch
+  * device entries without vendor/product were breaking configurations.
+    Posted upsteam
+- Add 0013-multipathd-fix-show-maps-json-crash.patch
+  * multipathd crashed showing json output with no devices. Posted
+    upstream
+
 * Tue May 23 2017 Benjamin Marzinski <bmarzins@redhat.com> 0.7.1-1.gitf21166a
 - Update Source to the latest upstream commit
 - Add 0001-libmultipath-add-comment-about-resuming.patch