device-mapper-multipath-0.9.9-2

Improve multiple OSCI tests

device-mapper-multipath.spec

@@ -1,6 +1,6 @@
 Name:    device-mapper-multipath
 Version: 0.9.9
-Release: 1%{?dist}
+Release: 2%{?dist}
 Summary: Tools to manage multipath devices using device-mapper
 License: GPLv2
 URL:     http://christophe.varoqui.free.fr/
@@ -233,6 +233,9 @@ fi
 %{_pkgconfdir}/libdmmp.pc
 
 %changelog
+* Thu Sep 12 2024 Benjamin Marzinski <bmarzins@redhat.com> - 0.9.9-2
+- Improve multiple OSCI tests
+
 * Fri Jul 26 2024 Benjamin Marzinski <bmarzins@redhat.com> - 0.9.9-1
 - Update source to upstream version 0.9.9
   * Previous patches 0014-0015 are included in the soruce tarball

tests/bindings/main.sh

@@ -18,40 +18,110 @@
 # Author: Lin Li   <lilin@redhat.com>
 
 #set -x
-source ../include/ec.sh || exit 200
+source ../include/tc.sh || exit 200
-
 tlog "running $0"
 
-trun "service multipathd stop"
+cleanup ()
-rpm -q device-mapper-multipath || yum install -y device-mapper-multipath
+{
-trun "mpathconf --enable --with_multipathd y --user_friendly_names y"
+    local retries
-trun "service multipathd status"
+    if pidof multipathd; then
-sleep 5
+        tlog "stopping multipathd"
+        trun "systemctl stop multipathd.service || pkill multipathd"
+        sleep 1
+    fi
+    retries=10
+    while pidof multipathd; do
+        ((retries--))
+        if [[ $retries -le 0 ]]; then
+            tfail_ "failed to stop multipath"
+            tend
+        fi
+        tlog "waiting for multipathd to stop"
+        sleep 2
+        pidof multipathd && pkill multipathd
+    done
+    trun "multipath -l -v1"
+    retries=10
+    while [[ -n `multipath -l -v1` ]]; do
+        ((retries--))
+        if [[ $retries -le 0 ]]; then
+            tfail_ "failed to remove deviece"
+            tend
+        fi
+        tlog "removing multipath device"
+        trun "udevadm settle"
+        trun "multipath -DF"
+        sleep 2
+    done
+    if lsmod | grep -q "^scsi_debug"; then
+        tlog "removing scsi_debug module"
+        tok "rmmod scsi_debug"
+    fi
+    trun "rm -f /etc/multipath.conf"
+}
 
-trun "multipath -F"
+assert ()
-sleep 5
+{
-terr "modprobe -r scsi_debug"
+    local cmd="$*"
-terr "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 \
+    _trun_ "$cmd" 0
-max_luns=2 no_lun_0=1"
+    if test $? -eq 0; then
-sleep 5
+        tpass_ "$cmd" ;
+    else
+        tfail_ "$cmd" ;
+        cleanup ;
+        tend ;
+    fi
+}
 
-disk_path=$(get_scsi_debug_devices)
+setup_config ()
-disk=$(basename $disk_path)
+{
-mpath_name=$(get_mpath_disk_by_scsi_device $disk)
+    trun "mpathconf --enable --user_friendly_names y"
+    sed -i '/^blacklist[[:space:]]*{/ a\
+	device {\
+		vendor ".*"\
+		product ".*"\
+	}
+' /etc/multipath.conf
+    cat << _EOF_ >> /etc/multipath.conf
+
+blacklist_exceptions {
+        device {
+                vendor Linux
+                product scsi_debug
+        }
+}
+_EOF_
+    trun "cat /etc/multipath.conf"
+}
+
+do_reconfigure ()
+{
+    tok "multipathd reconfigure"
+    sleep 5
+}
+
+rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath
+cleanup
+setup_config
+trun "rm -r /etc/multipath/bindings"
+trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2"
+sleep 5
+trun "systemctl start multipathd.service"
+while multipathd show daemon | grep -qv idle; do
+    tlog "waiting for multipathd to start"
+    sleep 1
+done
+
+trun 'multipathd show maps raw format "%n"'
+mpath_name=`multipathd show maps raw format "%n" | head -1`
+assert "[[ -n $mpath_name ]] && [[ $mpath_name != ok ]]"
 new_alias="mpath_test_$$"
 
 trun "sed -i 's/$mpath_name/$new_alias/' /etc/multipath/bindings"
-trun "multipath -r"
+do_reconfigure
-sleep 5
+trun 'multipathd show maps raw format "%n"'
-tok "[[ -b /dev/mapper/$new_alias ]]"
+mpath_name=`multipathd show maps raw format "%n" | head -1`
-tok is_mpath $new_alias
+assert "[[ $mpath_name = $new_alias ]]"
-sleep 5
 
-trun "multipath -F"
+cleanup
-sleep 5
-trun "modprobe -r scsi_debug"
-trun "service multipathd stop"
-sleep 3
-trun "multipath -W"
-trun "rm /etc/multipath/bindings"
 tend

tests/find_multipaths/Makefile

@@ -1,49 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2016 Red Hat, Inc.
-# #
-# # This program is free software: you can redistribute it and/or modify
-# # it under the terms of the GNU General Public License as published by
-# # the Free Software Foundation, either version 3 of the License, or
-# # (at your option) any later version.
-# #
-# # This program is distributed in the hope that it will be useful,
-# # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# # GNU General Public License for more details.
-# #
-# # You should have received a copy of the GNU General Public License
-# # along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-# # Author: Lin Li   <lilin@redhat.com>
-
-.PHONY: all install download clean
-
-BUILT_FILES=
-
-FILES=$(METADATA)  Makefile PURPOSE main.sh  
-
-run: $(FILES) build
-	./main.sh
-
-build: $(BUILT_FILES)
-	chmod a+x ./main.sh
-
-clean:
-	rm -f *~ *.rpm $(BUILT_FILES)
-
-include /usr/share/rhts/lib/rhts-make.include
-
-$(METADATA): Makefile
-	@touch $(METADATA)
-	@echo "Owner:        LiLin <lilin@redhat.com>" > $(METADATA)
-	@echo "Name:         $(TEST)" >> $(METADATA)
-	@echo "Path:         $(TEST_DIR)"	>> $(METADATA)
-	@echo "License:      GPLv3" >> $(METADATA)
-	@echo "TestVersion:  $(TESTVERSION)"	>> $(METADATA)
-	@echo "Description:  find_multipaths" >> $(METADATA)
-	@echo "TestTime:     15m" >> $(METADATA)
-	@echo "RunFor:       device-mapper-multipath" >> $(METADATA)
-	@echo "Requires:     device-mapper-multipath" >> $(METADATA)
-
-	rhts-lint $(METADATA)

tests/find_multipaths/main.sh

@@ -18,39 +18,92 @@
 # Author: Lin Li   <lilin@redhat.com>
 
 #set -x
-source ../include/ec.sh || exit 200
+source ../include/tc.sh || exit 200
+tlog "running $0"
+
+remove_devices ()
+{
+    local retries
+    retries=10
+    while [[ -n `multipath -l -v1` ]]; do
+        ((retries--))
+        if [[ $retries -le 0 ]]; then
+            tfail_ "failed to remove devices"
+	    cleanup
+            tend
+        fi
+        tlog "removing multipath devices"
+        trun "udevadm settle"
+        trun "multipath -F"
+        sleep 2
+    done
+}
 
 cleanup ()
 {
-	trun "multipathd disablequeueing maps"
+    local retries
-	trun "service multipathd stop"
+    if pidof multipathd; then
-	sleep 5
+        tlog "stopping multipathd"
-	trun "udevadm settle"
+        trun "systemctl stop multipathd.service || pkill multipathd"
-	trun "multipath -F"
+        sleep 1
-	sleep 5
+    fi
-	trun "modprobe -r scsi_debug"
+    retries=10
+    while pidof multipathd; do
+	((retries--))
+        if [[ $retries -le 0 ]]; then
+            tfail_ "failed to stop multipath"
+            tend
+        fi
+        tlog "waiting for multipathd to stop"
+        sleep 2
+        pidof multipathd && pkill multipathd
+    done
+    trun "multipath -l -v1"
+    retries=10
+    while [[ -n `multipath -l -v1` ]]; do
+        ((retries--))
+        if [[ $retries -le 0 ]]; then
+            tfail_ "failed to remove devices"
+            tend
+        fi
+        tlog "removing multipath devices"
+        trun "udevadm settle"
+        trun "multipath -DF"
+        sleep 2
+    done
+    if lsmod | grep -q "^scsi_debug"; then
+        tlog "removing scsi_debug module"
+        tok "rmmod scsi_debug"
+    fi
+    trun "rm -f /etc/multipath.conf"
+    trun "rm -f /etc/multipath/wwids"
+    trun "rm -r /etc/multipath/bindings"
 }
 
-tlog "running $0"
+assert ()
+{
+    local cmd="$*"
+    _trun_ "$cmd" 0
+    if test $? -eq 0; then
+        tpass_ "$cmd" ;
+    else
+        tfail_ "$cmd" ;
+        cleanup ;
+        tend ;
+    fi
+}
 
-# which not set find_multipaths yes, so multipath always create a multipath device for single device
+setup_config ()
-# so stop service and reconfig with  --find_multipaths y, and reload/start the service again. 
+{
-rpm -q device-mapper-multipath || yum install -y device-mapper-multipath
+    trun "mpathconf --enable --user_friendly_names y --find_multipaths y"
+    sed -i '/^blacklist[[:space:]]*{/ a\
+	device {\
+		vendor ".*"\
+		product ".*"\
+	}
+' /etc/multipath.conf
+    cat << _EOF_ >> /etc/multipath.conf
 
-# test with find_multipath=y, will not multipath for the single device; reload/start the service to enable the config
-cleanup
-trun "rm -f /etc/multipath.conf"
-trun "rm -f /etc/multipath/wwids"
-trun "mpathconf --enable --user_friendly_names y --find_multipaths y --with_multipathd n"
-sed -i '/^blacklist[[:space:]]*{/ a\
-	device {\n              vendor ".*"\n           product ".*"\n  }
-' /etc/multipath.conf
-if grep -qw blacklist_exceptions /etc/multipath.conf ; then
-	sed -i '/^blacklist_exceptions[[:space:]]*{/ a\
-	device {\n              vendor Linux\n          product scsi_debug\n    }
-' /etc/multipath.conf
-else
-	cat << _EOF_ >> /etc/multipath.conf
 blacklist_exceptions {
 	device {
 		vendor Linux
@@ -58,56 +111,69 @@ blacklist_exceptions {
 	}
 }
 _EOF_
-fi
+    trun "cat /etc/multipath.conf"
-trun "service multipathd start"
+}
+
+do_reconfigure ()
+{
+    trun "cat /etc/multipath.conf"
+    tok "multipathd reconfigure"
+    sleep 5
+}
+
+trun "rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath"
+cleanup
+setup_config
+
+# test with find_multipath=y, will not multipath the single device
 trun "modprobe scsi_debug"
 sleep 5
+trun "systemctl start multipathd.service"
+while multipathd show daemon | grep -qv idle; do
+    tlog "waiting for multipathd to start"
+    sleep 1
+done
+trun 'multipathd show paths raw format "%d %m"'
+trun 'cat /etc/multipath/wwids'
+mpath_name=`multipathd show paths raw format "%m" | head -1`
+tok "[[ $mpath_name = '[orphan]' ]]"
+remove_devices
+
+# test with find_multipath=n, will multipath the single device
+trun 'mpathconf --find_multipaths n'
+do_reconfigure
+trun 'multipathd show paths raw format "%d %m"'
+trun 'cat /etc/multipath/wwids'
+mpath_name=`multipathd show paths raw format "%m" | head -1`
+tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]"
+remove_devices
+
+# test with find_multipath=y, with multipath single device with known WWID
+trun 'mpathconf --find_multipaths y'
+do_reconfigure
+trun 'multipathd show paths raw format "%d %m"'
+trun 'cat /etc/multipath/wwids'
+mpath_name=`multipathd show paths raw format "%m" | head -1`
+tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]"
+remove_devices
+
+# Clear WWID, test with find_multipath=y, will not multipath single device
 trun "multipath -W"
-cat /etc/multipath/wwids
+do_reconfigure
-trun "multipath"
+trun 'multipathd show paths raw format "%d %m"'
-disk_path=$(get_scsi_debug_devices)
+trun 'cat /etc/multipath/wwids'
-disk_node=$(basename $disk_path)
+mpath_name=`multipathd show paths raw format "%m" | head -1`
-mpath_name=$(get_mpath_disk_by_scsi_device $disk_node)
+tok "[[ $mpath_name = '[orphan]' ]]"
-tok '[[ $mpath_name = "[orphan]" ]]'
+remove_devices
-
+assert 'rmmod scsi_debug'
-# test with find_multipath=n, will multipath for the single device
-trun "mpathconf --user_friendly_names y --find_multipaths n --with_multipathd y"
-sleep 5
-mpath_name=$(get_mpath_disk_by_scsi_device $disk_node)
-tok "is_mpath $mpath_name"
-
-# flush new created path
-trun "multipath -F"
-sleep 1
-
-# test with find_multipath=y, A path has the same WWID as a multipath device that was previously created
-trun "mpathconf --user_friendly_names y --find_multipaths y --with_multipathd y"
-sleep 5
-mpath_name=$(get_mpath_disk_by_scsi_device $disk_node)
-tok "is_mpath $mpath_name"
-trun "multipath -F"
-sleep 1
-
-# Clear wwid, test with find_multipath=y, will not multipath for the single device
-trun "multipath -W"
-trun "service multipathd reload"
-sleep 5
-mpath_name=$(get_mpath_disk_by_scsi_device $disk_node)
-tok '[[ $mpath_name = "[orphan]" ]]'
-
-trun "multipath -F"
-sleep 5
-trun "modprobe -r scsi_debug"
 
 # test find_multipaths=y create device for paths have same wwid
-tok "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 max_luns=2 no_lun_0=1"
+trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2"
 sleep 5
-disk_paths=$(get_scsi_debug_devices)
+trun 'multipathd show paths raw format "%d %m"'
-disk_node=$(basename $disk_paths)
+trun 'cat /etc/multipath/wwids'
-mpath_name=$(get_mpath_disk_by_scsi_device $disk_node)
+mpath_name=`multipathd show paths raw format "%m" | head -1`
-tok "is_mpath $mpath_name"
+tok "[[ -n $mpath_name ]] && [[ $mpath_name != '[orphan]' ]]"
 
 cleanup
-trun "multipath -W"
-cat /etc/multipath/wwids
 tend

tests/include/ec.sh

@@ -44,9 +44,12 @@ function _init (){
 }
 
 function _destroy (){
-    sleep 10
+    Cmd "multipathd disablequeueing maps"
-    Cmd "multipath -F"
     sleep 5
+    Cmd "multipath -DF -R2"
+    Cmd "service multipathd stop"
+    sleep 5
+    Cmd "udevadm settle"
     Cmd "modprobe -r scsi_debug"
 }
 
@@ -174,10 +177,7 @@ AA
     fi
 #setup scsi_debug
     echo "INFO: Loading scsi_debug module for simulation of mpath"
-    modprobe scsi_debug \
+    modprobe scsi_debug vpd_use_hostno=0 add_host=2
-        num_tgts=1 vpd_use_hostno=0 \
-        add_host=4 delay=20 \
-        max_luns=2 no_lun_0=1 2>&1 1>/dev/null
 
     echo "INFO: Waiting for udev to create /dev/sdX"
     sleep 15s #wait for udev to create /dev/sdX
@@ -190,7 +190,6 @@ AA
     cat << AA > /etc/multipath.conf
 defaults {
 #Enable multibus is for mutlbus testing
-    path_grouping_policy multibus
     user_friendly_names     yes
 }
 blacklist {

tests/medium_error_scsi_debug/main.sh

@@ -16,47 +16,51 @@
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # Author: LiLin <lilin@redhat.com>
+source ../include/tc.sh || exit 200
 
-function cleanup()
+cleanup()
 {
     sleep 5
     udevadm settle
-    multipath -F
+    trun "multipath -DF"
     sleep 5
-    modprobe -r scsi_debug    
+    trun "modprobe -r scsi_debug"
-
-    return 0
 }
 
-yum -y install device-mapper device-mapper-multipath
+assert ()
-mpathconf --enable
+{
-service multipathd stop
+	local cmd="$*"
-modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20  max_luns=2 no_lun_0=1 opts=2
+	_trun_ "$cmd" 0
+	if test $? -eq 0; then
+		tpass_ "$cmd" ;
+	else
+		tfail_ "$cmd" ;
+		cleanup ;
+		tend ;
+	fi
+}
+
+tlog "running $0"
+rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath
+trun "multipathd disablequeueing maps"
+cleanup
+trun "service multipathd stop"
+trun "rm -f /etc/multipath.conf"
+trun "mpathconf --enable"
+trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2 opts=2"
 sleep 5
-multipath > /dev/null
+trun "multipath"
 sleep 5
+trun "multipath -l"
 mpathdev=`multipath -l | grep scsi_debug | awk '{print $1}' | head -1`
-if [ -z "$mpathdev" ]; then
+assert "[[ -n \"$mpathdev\" ]]"
-	echo "------- FAIL, no multipath device created -----"
-	cleanup
-	exit 1
-fi
 before_active=`multipath -l $mpathdev | grep "active undef" | wc -l`
+tlog "before active = ${before_active}"
 
 IO_error=`dd if=/dev/zero of=/dev/mapper/$mpathdev bs=1024 seek=2330 count=10 2>&1 | grep -o "Input/output error" `
-if [ -n "$IO_error" ];then
+assert "[[ -n \"$IO_error\" ]]"
-	after_active=`multipath -l $mpathdev | grep "active undef" | wc -l`
+after_active=`multipath -l $mpathdev | grep "active undef" | wc -l`
-	if [ "$before_active" -eq "$after_active" ]; then
+tlog "after active = ${after_active}"
-		echo "------- PASS,  a medium error, correctly generated an I/O error and did not fail paths -----"
+assert "[[ \"$before_active\" -eq \"$after_active\" ]]"
-		cleanup
+cleanup
-		exit 0
+tend
-	else
-		echo "------- FAIL, paths failed -----"
-		cleanup
-		exit 1
-	fi
-else
-	echo "------- FAIL, did not generate an I/O error -----"
-	cleanup
-	exit 1
-fi

tests/user_friendly_names/main.sh

@@ -17,50 +17,125 @@
 
 # Author: Lin Li   <lilin@redhat.com>
 
-source ../include/ec.sh || exit 200
+source ../include/tc.sh || exit 200
-
 tlog "running $0"
 
-trun "rpm -q device-mapper-multipath || yum install -y device-mapper-multipath"
+cleanup ()
-trun "mpathconf --enable --with_multipathd y --user_friendly_names y"
+{
+    local retries
+    if pidof multipathd; then
+        tlog "stopping multipathd"
+        trun "systemctl stop multipathd.service || pkill multipathd"
+        sleep 1
+    fi
+    retries=10
+    while pidof multipathd; do
+	((retries--))
+        if [[ $retries -le 0 ]]; then
+            tfail_ "failed to stop multipath"
+            tend
+        fi
+        tlog "waiting for multipathd to stop"
+        sleep 2
+        pidof multipathd && pkill multipathd
+    done
+    trun "multipath -l -v1"
+    retries=10
+    while [[ -n `multipath -l -v1` ]]; do
+        ((retries--))
+        if [[ $retries -le 0 ]]; then
+            tfail_ "failed to remove deviece"
+            tend
+        fi
+        tlog "removing multipath device"
+        trun "udevadm settle"
+        trun "multipath -DF"
+        sleep 2
+    done
+    if lsmod | grep -q "^scsi_debug"; then
+        tlog "removing scsi_debug module"
+        tok "rmmod scsi_debug"
+    fi
+    trun "rm -f /etc/multipath.conf"
+}
 
-# backup the /etc/multipath.conf
+assert ()
-trun "cp /etc/multipath.conf /etc/multipath.conf.$$"
+{
-trun "multipath -F"
+    local cmd="$*"
+    _trun_ "$cmd" 0
+    if test $? -eq 0; then
+        tpass_ "$cmd" ;
+    else
+        tfail_ "$cmd" ;
+        cleanup ;
+        tend ;
+    fi
+}
 
-trun "modprobe scsi_debug num_tgts=1 vpd_use_hostno=0 add_host=2 delay=20 \
+setup_config ()
-max_luns=2 no_lun_0=1"
+{
-trun "multipath"
+    trun "mpathconf --enable --user_friendly_names y"
-# wwid shown slowly on s390x by the script framework, but normally when run by multipath command directly
+    sed -i '/^blacklist[[:space:]]*{/ a\
-# so extend sleep time 
+	device {\
-sleep 20
+		vendor ".*"\
+		product ".*"\
+	}
+' /etc/multipath.conf
+    cat << _EOF_ >> /etc/multipath.conf
 
-disk=$(get_scsi_debug_devices)
+blacklist_exceptions {
-disk=$(basename $disk)
+	device {
-wwid=$(get_wwid_of_disk $disk)
+		vendor Linux
-mpath=$(get_mpath_disk_by_scsi_device $disk)
+		product scsi_debug
+	}
+}
 
-# user_friendly_names = yes and mpath=test
+multipaths {
-#cur_dir=/mnt/tests/kernel/storage/multipath/user_friendly_names/
+	multipath {
-#cur_dir=/home/test/scratch/device-mapper-multipath/user_friendly_names
+		wwid TEST_WWID
-trun "cat multipath.conf.yes | sed "s/your_wwid/$wwid/g" > /etc/multipath.conf"
+		alias test
-trun "cat -n /etc/multipath.conf"
+	}
-trun "multipath -r"
+}
-echo ">>> Verify 'test ($wwid)' is present ..."
+_EOF_
-trun "multipath -ll"
+    trun "cat /etc/multipath.conf"
-tok "multipath -ll | egrep \"^test\""
+}
 
-# user_friendly_names = no
+do_reconfigure ()
-trun "cat multipath.conf.no > /etc/multipath.conf"
+{
-trun "multipath -r"
+    trun "cat /etc/multipath.conf"
-echo ">>> Verify 'test' is gone but '$wwid' present ..."
+    tok "multipathd reconfigure"
-trun "multipath -ll"
+    sleep 5
-tok "multipath -ll | egrep \"^$wwid\""
+}
-sleep 10
-tok "multipath -F $wwid"
-sleep 10
-trun "modprobe -r scsi_debug"
 
-trun "cp /etc/multipath.conf.$$ /etc/multipath.conf"
+trun "rpm -q device-mapper-multipath || dnf install -y device-mapper-multipath"
-trun "multipath -F; multipath"
+cleanup
+setup_config
+trun "rm -r /etc/multipath/bindings"
+trun "modprobe scsi_debug vpd_use_hostno=0 add_host=2"
+sleep 5
+trun "systemctl start multipathd.service"
+while multipathd show daemon | grep -qv idle; do
+    tlog "waiting for multipathd to start"
+    sleep 1
+done
+trun 'multipathd show maps raw format "%n %w"'
+# verify user_friendly_name
+tok 'multipathd show maps raw format "%n" | head -1 | grep -q mpath'
+wwid=`multipathd show maps raw format "%w" | head -1`
+assert "[[ -n $wwid ]] && [[ $wwid != ok ]]"
+sed -i 's/TEST_WWID/'"$wwid"'/' /etc/multipath.conf
+do_reconfigure
+trun 'multipathd show maps raw format "%n %w"'
+# verify configured alias takes precedence over user_friendly_name
+tok 'multipathd show maps raw format "%n" | head -1 | grep -q test'
+trun "mpathconf --user_friendly_names n"
+do_reconfigure
+trun 'multipathd show maps raw format "%n %w"'
+# verify configured alias takes precedence over wwid name
+tok 'multipathd show maps raw format "%n" | head -1 | grep -q test'
+sed -i 's/'"$wwid"'/TEST_WWID/' /etc/multipath.conf
+do_reconfigure
+trun 'multipathd show maps raw format "%n %w"'
+tok 'multipathd show maps raw format "%n" | head -1 | grep -q '"$wwid"
+cleanup
 tend

tests/user_friendly_names/multipath.conf.no

@@ -1,3 +0,0 @@
-defaults {
-    user_friendly_names     no
-}

tests/user_friendly_names/multipath.conf.yes

@@ -1,11 +0,0 @@
-defaults {
-    user_friendly_names     yes
-}
-
-multipaths {
-   multipath {
-       wwid your_wwid
-       alias test
-   }
-}
-