device-mapper-multipath/0014-multipath-update-man-pages.patch

From 0992a545413cf2bcbde18c90f04b9e5b1077fd62 Mon Sep 17 00:00:00 2001
From: Benjamin Marzinski <bmarzins@redhat.com>
Date: Thu, 1 Aug 2019 16:29:41 -0500
Subject: [PATCH] multipath: update man pages

Add documentation for the marginal_pathgroups option and the
(un)setmarginal commands.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
---
 multipath/multipath.conf.5 | 34 ++++++++++++++++++++++++++++++----
 multipathd/multipathd.8    | 19 +++++++++++++++++++
 2 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
index 08297a41..ac8eadd0 100644
--- a/multipath/multipath.conf.5
+++ b/multipath/multipath.conf.5
@@ -1042,6 +1042,28 @@ The default is: \fBno\fR
 .
 .
 .TP
+.B marginal_pathgroups
+If set to \fIno\fR, the \fIdelay_*_checks\fR, \fImarginal_path_*\fR, and
+\fIsan_path_err_*\fR options will keep marginal, or \(dqshaky\(dq, paths from
+being reinstated until they have been monitored for some time. This can cause
+situations where all non-marginal paths are down, and no paths are usable
+until multipathd detects this and reinstates a marginal path. If the multipath
+device is not configured to queue IO in this case, it can cause IO errors to
+occur, even though there are marginal paths available.  However, if this
+option is set to \fIyes\fR, when one of the marginal path detecting methods
+determines that a path is marginal, it will be reinstated and placed in a
+seperate pathgroup that will only be used after all the non-marginal pathgroups
+have been tried first. This prevents the possibility of IO errors occuring
+while marginal paths are still usable. After the path has been monitored
+for the configured time, and is declared healthy, it will be returned to its
+normal pathgroup. See "Shaky paths detection" below for more information.
+.RS
+.TP
+The default  is: \fBno\fR
+.RE
+.
+.
+.TP
 .B find_multipaths
 This option controls whether multipath and multipathd try to create multipath
 maps over non-blacklisted devices they encounter. This matters a) when a device is
@@ -1689,10 +1711,14 @@ events. \fImultipathd\fR supports three different methods for detecting this
 situation and dealing with it. All methods share the same basic mode of
 operation: If a path is found to be \(dqshaky\(dq or \(dqflipping\(dq,
 and appears to be in healthy status, it is not reinstated (put back to use)
-immediately. Instead, it is watched for some time, and only reinstated
-if the healthy state appears to be stable. The logic of determining
-\(dqshaky\(dq condition, as well as the logic when to reinstate,
-differs between the three methods.
+immediately. Instead, it is placed in the \(dqdelayed\(dq state and watched
+for some time, and only reinstated if the healthy state appears to be stable.
+If the \fImarginal_pathgroups\fR option is set, the path will reinstated
+immediately, but placed in a special pathgroup for marginal paths. Marginal
+pathgroups will not be used until all other pathgroups have been tried. At the
+time when the path would normally be reinstated, it will be returned to its
+normal pathgroup. The logic of determining \(dqshaky\(dq condition, as well as
+the logic when to reinstate, differs between the three methods.
 .TP 8
 .B \(dqdelay_checks\(dq failure tracking
 This method is \fBdeprecated\fR and mapped to the \(dqsan_path_err\(dq method.
diff --git a/multipathd/multipathd.8 b/multipathd/multipathd.8
index edac7a92..048a838d 100644
--- a/multipathd/multipathd.8
+++ b/multipathd/multipathd.8
@@ -277,6 +277,25 @@ Remove the persistent reservation key associated with $map from the
 \fIreservation_key\fR is set to \fBfile\fR in \fI/etc/multipath.conf\fR.
 .
 .TP
+.B path $path setmarginal
+move $path to a marginal pathgroup. The path will remain in the marginal
+path group until \fIunsetmarginal\fR is called. This command will only
+work if \fImarginal_pathgroups\fR is enabled and there is no Shaky paths
+detection method configured (see the multipath.conf man page for details).
+.
+.TP
+.B path $path unsetmarginal
+return marginal path $path to its normal pathgroup. This command will only
+work if \fImarginal_pathgroups\fR is enabled and there is no Shaky paths
+detection method configured (see the multipath.conf man page for details).
+.
+.TP
+.B map $map unsetmarginal
+return all marginal paths in $map to their normal pathgroups. This command
+will only work if \fImarginal_pathgroups\fR is enabled and there is no Shaky
+paths detection method configured (see the multipath.conf man page for details).
+.
+.TP
 .B quit|exit
 End interactive session.
 .
-- 
2.17.2