debugedit/0001-find-debuginfo-Add-v-verbose-for-per-file-messages.patch

From 84cfaca936a9dcfc26bd9d59edbdeeae88fc4763 Mon Sep 17 00:00:00 2001
From: Denys Vlasenko <dvlasenk@redhat.com>
Date: Thu, 22 Jun 2023 15:31:03 +0200
Subject: [PATCH] find-debuginfo: Add -v,--verbose for per file messages

Only print messages what big steps we are at without --verbose.

For a reader of rpmbuild's log, it's rather unclear what find-debuginfo
is doing. It used to be too verbose, "extracting debug info from FILE"
for every file, and while this can be suppressed now, we still end up
with something semi-mysterious like this:

...
extracting debug info from /builddir/build/BUILDROOT/xyz
gdb-add-index: No index was created for /builddir/build/BUILDROOT/xyz
gdb-add-index: [Was there no debuginfo? Was there already an index?]
symlinked /usr/lib/debug/usr/lib64/libcpupower.so.0.0.1.debug to /usr/lib/debug/usr/lib64/libcpupower.so.debug
symlinked /usr/lib/debug/usr/lib64/libcpupower.so.0.0.1.debug to /usr/lib/debug/usr/lib64/libcpupower.so.0.debug
cpio: binutils-2.30/bfd: Cannot stat: No such file or directory
cpio: binutils-2.30/bfd/aout-target.h: Cannot stat: No such file or directory
cpio: binutils-2.30/bfd/aoutx.h: Cannot stat: No such file or directory
cpio: binutils-2.30/bfd/archive.c: Cannot stat: No such file or directory
cpio: binutils-2.30/bfd/archive64.c: Cannot stat: No such file or directory
...
775655 blocks
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
...

The reader is left confused. "What these cpio errors are about?
Why those sources are not found?" (Well, because not every source
name extracted by 'debugedit -l' has to exist, but this requires
considerable digging aroung to understand).

We can give a few messages explaining what general steps we go through:

    Extracting debug info from N files
    DWARF-compressing N files
    Creating .debug symlinks for symlinks to ELF files
    Copying sources found by 'debugedit -l'

This is also useful to get a feeling which steps are time consuming.
Kernel builds often need to investigate this aspect. To help a bit more,
add "find-debuginfo: starting" and "find-debuginfo: done" messages too.

This patch adds these messages.
The -q options suppress these messages too.

It also adds a --verbose flag to print per file messages.
Those per file messages are now suppressed by default and
only the general step messages are show. Unless -q is given,
which suppresses all non-error output.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Mark Wielaard <mark@klomp.org>
---
 scripts/find-debuginfo.in | 36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/scripts/find-debuginfo.in b/scripts/find-debuginfo.in
index f87b777..5613f69 100755
--- a/scripts/find-debuginfo.in
+++ b/scripts/find-debuginfo.in
@@ -26,7 +26,7 @@ Usage: find-debuginfo [OPTION]... [builddir]
 automagically generates debug info and file lists
 
 Options:
-[--strict-build-id] [-g] [-r] [-m] [-i] [-n] [-q]
+[--strict-build-id] [-g] [-r] [-m] [-i] [-n] [-q] [-v]
 [--keep-section SECTION] [--remove-section SECTION]
 [--g-libs]
 [-j N] [--jobs N]
@@ -94,7 +94,9 @@ will be called /usr/debug/src/<BASE>.  This makes sure the debug source
 dirs are unique between package version, release and achitecture (Use
 --unique-debug-src-base "%{name}-%{VERSION}-%{RELEASE}.%{_arch}")
 
-The -q or --quiet flag silences non-error output from the script.
+The -q or --quiet flag silences all non-error output from the script.
+The -v or --verbose flag add more output for all files processed.
+When neither -q or -v is given then only output for each pass is given.
 
 All file names in switches are relative to builddir ('.' if not given).
 EOF
@@ -150,9 +152,12 @@ n_jobs=1
 # exit early on --version or --help
 done=false
 
-# silence non-error output
+# silence all output
 quiet=false
 
+# add more non-error output
+verbose=false
+
 BUILDDIR=.
 out=debugfiles.list
 srcout=
@@ -248,6 +253,11 @@ while [ $# -gt 0 ]; do
     ;;
   -q|--quiet)
     quiet=true
+    verbose=false
+    ;;
+  -v|--verbose)
+    quiet=false
+    verbose=true
     ;;
   --version)
     echo "find-debuginfo @VERSION@"
@@ -291,6 +301,8 @@ if [ "$strip_g" = "true" ] && [ "$strip_glibs" = "true" ]; then
   exit 2
 fi
 
+$quiet || echo "find-debuginfo: starting" 2>&1
+
 i=0
 while ((i < nout)); do
   outs[$i]="$BUILDDIR/${outs[$i]}"
@@ -447,7 +459,7 @@ do_file()
   get_debugfn "$f"
   [ -f "${debugfn}" ] && return
 
-  $quiet || echo "extracting debug info from $f"
+  $verbose && echo "extracting debug info from $f"
   # See also cpio SOURCEFILE copy. Directories must match up.
   debug_base_name="$RPM_BUILD_DIR"
   debug_dest_name="/usr/src/debug"
@@ -523,7 +535,7 @@ do_file()
     grep "^$inum " "$temp/linked" | while read inum linked; do
       link=$debugfn
       get_debugfn "$linked"
-      $quiet || echo "hard linked $link to $debugfn"
+      $verbose && echo "hard linked $link to $debugfn"
       mkdir -p "$(dirname "$debugfn")" && ln -nf "$link" "$debugfn"
     done
   fi
@@ -551,6 +563,7 @@ run_job()
 }
 
 n_files=$(wc -l <"$temp/primary")
+$quiet || echo "Extracting debug info from $n_files files" 2>&1
 if [ $n_jobs -gt $n_files ]; then
   n_jobs=$n_files
 fi
@@ -589,7 +602,8 @@ if $run_dwz \
    && [ -d "${RPM_BUILD_ROOT}/usr/lib/debug" ]; then
   readarray dwz_files < <(cd "${RPM_BUILD_ROOT}/usr/lib/debug"; find -type f -name \*.debug | LC_ALL=C sort)
   if [ ${#dwz_files[@]} -gt 0 ]; then
-    $quiet || size_before=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1)
+    $quiet || echo "DWARF-compressing ${#dwz_files[@]} files" 2>&1
+    $verbose && size_before=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1)
     dwz_multifile_name="${RPM_PACKAGE_NAME}-${RPM_PACKAGE_VERSION}-${RPM_PACKAGE_RELEASE}.${RPM_ARCH}"
     dwz_multifile_suffix=
     dwz_multifile_idx=0
@@ -613,8 +627,8 @@ if $run_dwz \
       echo >&2 "*** ERROR: DWARF compression requested, but no dwz installed"
       exit 2
     fi
-    $quiet || size_after=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1)
-    $quiet || echo "original debug info size: ${size_before}kB, size after compression: ${size_after}kB"
+    $verbose && size_after=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1)
+    $verbose && echo "original debug info size: ${size_before}kB, size after compression: ${size_after}kB"
     # Remove .dwz directory if empty
     rmdir "${RPM_BUILD_ROOT}/usr/lib/debug/.dwz" 2>/dev/null
 
@@ -627,6 +641,7 @@ fi
 
 # For each symlink whose target has a .debug file,
 # make a .debug symlink to that file.
+$quiet || echo "Creating .debug symlinks for symlinks to ELF files" 2>&1
 find "$RPM_BUILD_ROOT" ! -path "${debugdir}/*" -type l -print |
 while read f
 do
@@ -634,7 +649,7 @@ do
   f=${f#$RPM_BUILD_ROOT}
   t=${t#$RPM_BUILD_ROOT}
   if [ -f "$debugdir$t" ]; then
-    $quiet || echo "symlinked /usr/lib/debug$t to /usr/lib/debug${f}.debug"
+    $verbose && echo "symlinked /usr/lib/debug$t to /usr/lib/debug${f}.debug"
     debug_link "/usr/lib/debug$t" "${f}.debug"
   fi
 done
@@ -648,6 +663,7 @@ if [ -s "$SOURCEFILE" ]; then
     debug_dest_name="/usr/src/debug/${unique_debug_src_base}"
   fi
 
+  $quiet || echo "Copying sources found by 'debugedit -l' to ${debug_dest_name}" 2>&1
   mkdir -p "${RPM_BUILD_ROOT}${debug_dest_name}"
   # Filter out anything compiler generated which isn't a source file.
   # e.g. <internal>, <built-in>, <__thread_local_inner macros>.
@@ -763,3 +779,5 @@ if ((nout > 0)); then
   cat "$LISTFILE" >> "${LISTFILE}.new"
   mv "${LISTFILE}.new" "$LISTFILE"
 fi
+
+$quiet || echo "find-debuginfo: done" 2>&1
-- 
2.39.3