diff -up cups-2.3.0/backend/failover.c.failover cups-2.3.0/backend/failover.c --- cups-2.3.0/backend/failover.c.failover 2019-10-07 12:22:17.158626746 +0200 +++ cups-2.3.0/backend/failover.c 2019-10-07 12:22:17.158626746 +0200 @@ -0,0 +1,837 @@ +/* + * Failover Backend for the Common UNIX Printing System (CUPS). + * + * Copyright (c) 2014, Red Hat, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Red Hat, Inc. nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT, + * INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY + * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * Original version by Clark Hale, Red Hat, Inc. + * + * This backend presents a fake printer that will choose the first + * available printer from a list of IPP URIs. + * + * Option failover contains a comma separated list of IPP URIs. The + * URIs are attempted in-order. + * + * Option failover-retries contains an integer that indicates how many + * times to iterate through the failover list before completely + * failing. + * + * Contents: + * main() - Checks each printer in a failover list, and + * sends job data to the first available printer + * move_job() - Sends and IPP Move-Job request + * check_printer() - Checks a printer's attributes to see + * if it's enabled and accepting jobs + * read_config() - Read the backends configuration from + * options + * get_printer_attributes() - Sends an IPP Get-Attributes request to + * a URI + * sigterm_handler() - Handle SIGTERM that cancels the job + * password_cb() - Password call back used to disable password + * prompt + */ +#include +#include +#include +#include +#include +#include +#include "backend-private.h" + +/* + * Return Values + */ +typedef enum fo_state_e +{ + FO_PRINTER_GOOD = 0, + FO_PRINTER_BAD, + FO_PRINTER_BUSY, + FO_AUTH_REQUIRED +} fo_state_t; + +/* + * Constants + */ +#define FAILOVER_DEFAULT_RETRIES (3) +#define FAILOVER_PASSWORD_RETRIES_MAX (3) + +/* + * Local Functions + */ +static int check_printer(const char *device_uri); +static int read_config(cups_array_t *printer_array, int *retries, + const char *options); +static int get_printer_attributes(const char *device_uri, + ipp_t **attributes); +static int move_job(int jobid, const char *dest); +static void sigterm_handler(int sig); +static const char *password_cb(const char *); + +/* + * Global Variables + */ +static int job_canceled = 0; /* Job canceled */ +static char *password = NULL; /* password for device */ +static int password_retries = 0; +static const char *auth_info_required = "none"; + +/* + * 'main()' - Checks each printer in a failover list, and + * sends job data to the first available printer + * Usage: + * printer-uri job-id user title copies options [file] + * + * The printer-uri option is not used, but it still required to fit + * to the backend(7) standards. + */ +int +main(int argc, char *argv[]) +{ + const char *selected_uri = NULL; /* URI of selected printer */ + const char *tmp_device_uri; /* Device URI to check */ + cups_array_t *printer_array; /* Array of available printers */ + int printer_count = 0; /* current printer array index */ + int retry_max = 1; /* maximum retries before exit */ + int retry_count = 0; /* current retry number */ + int auth_failed_count = 0; /* auth failures per loop */ + int rc = CUPS_BACKEND_OK; +#if defined(HAVE_SIGACTION) && !defined(HAVE_SIGSET) + struct sigaction action; /* Actions for POSIX signals */ +#endif /* HAVE_SIGACTION && !HAVE_SIGSET */ + + /* + * Check args + */ + if (argc == 1) + { + /* + * print out discovery data + */ + char *backendName; + + if ((backendName = strrchr(argv[0], '/')) != NULL) + backendName++; + else + backendName = argv[0]; + + _cupsLangPrintf(stderr,"network %s \"Unknown\" \"%s (%s)\"\n", + backendName, + _cupsLangString(cupsLangDefault(), _("Failover Printer")), + backendName); + + return (CUPS_BACKEND_OK); + } + else if (argc < 6) + { + _cupsLangPrintf(stderr, + _("Usage: %s job-id user title copies options [file]"), + argv[0]); + return (CUPS_BACKEND_STOP); + } + + fprintf(stderr, "DEBUG: Failover backend starting up.\n"); + + /* + * Don't buffer status messages + */ + setbuf(stderr, NULL); + + /* + * Ignore SIGPIPE and catch SIGTERM signals... + */ +#ifdef HAVE_SIGSET + sigset(SIGPIPE, SIG_IGN); + sigset(SIGTERM, sigterm_handler); +#elif defined(HAVE_SIGACTION) + memset(&action, 0, sizeof(action)); + action.sa_handler = SIG_IGN; + sigaction(SIGPIPE, &action, NULL); + + sigemptyset(&action.sa_mask); + sigaddset(&action.sa_mask, SIGTERM); + action.sa_handler = sigterm_handler; + sigaction(SIGTERM, &action, NULL); +#else + signal(SIGPIPE, SIG_IGN); + signal(SIGTERM, sigterm_handler); +#endif /* HAVE_SIGSET */ + + printer_array = cupsArrayNew(NULL, NULL); + + /* + * Read Configuration + */ + if ((rc = read_config(printer_array, &retry_max, + argv[5])) != CUPS_BACKEND_OK) + { + fprintf(stderr, "ERROR: Failed to read configuration options!\n"); + goto cleanup; + } + + /* + * Main Retry Loop + */ + for (retry_count = 0; retry_count < retry_max; retry_count++) + { + fprintf(stderr, "DEBUG: Retry loop #%d\n", retry_count + 1); + + /* + * Reset Counters + */ + printer_count = 0; + auth_failed_count = 0; + + tmp_device_uri = (char *)cupsArrayFirst(printer_array); + + do + { + if (job_canceled) + { + fprintf(stderr, "DEBUG: Job Canceled\n"); + goto cleanup; + } + + fprintf(stderr,"DEBUG: Checking printer #%d: %s\n", + printer_count+1, tmp_device_uri); + + rc = check_printer(tmp_device_uri); + + // Printer is available and not busy. + if ( rc == FO_PRINTER_GOOD ) + { + selected_uri = tmp_device_uri; + break; + } + // Printer is busy + else if ( rc == FO_PRINTER_BUSY ) + { + fprintf(stderr, "DEBUG: Waiting for job to complete.\n"); + sleep(2); + continue; + } + // Authorization is required to access the printer. + else if (rc == FO_AUTH_REQUIRED) + { + auth_failed_count++; + fprintf(stderr, "DEBUG: auth_failed_count = %d\n", auth_failed_count); + } + // Printer is stopped or not accepting jobs + else + { + if (!printer_count) + fprintf(stderr, "INFO: Primary Printer, %s, not available. " + "Attempting Failovers...\n", + tmp_device_uri); + else + fprintf(stderr, "INFO: Failover Printer, %s, not available. " + "Attempting Failovers..\n", + tmp_device_uri); + printer_count++; + tmp_device_uri = (char *)cupsArrayNext(printer_array); + } + } while (tmp_device_uri != NULL); + + if (selected_uri && !printer_count) + fprintf(stderr, "STATE: -primary-printer-failed\n"); + else + fprintf(stderr, "STATE: +primary-printer-failed\n"); + + if (job_canceled) + { + fprintf(stderr, "DEBUG: Job Canceled\n"); + goto cleanup; + } + + if (!selected_uri && auth_failed_count == printer_count) + { + fprintf(stderr, "ERROR: All failover printers failed with " + "authorization issues.\n"); + rc = CUPS_BACKEND_AUTH_REQUIRED; + fprintf(stderr, "ATTR: auth-info-required=%s\n", auth_info_required); + goto cleanup; + } + else if (!selected_uri && retry_count + 1 < retry_max) + { + fprintf(stderr, "INFO: No suitable printer found...retrying...\n"); + sleep(2); + continue; + } + else if (selected_uri) + { + fprintf(stderr, "DEBUG: Using printer, %s.\n", selected_uri); + break; + } + } + + if (!selected_uri) + { + fprintf(stderr, "ERROR: No suitable printer found. Aborting print\n"); + rc = CUPS_BACKEND_FAILED; + goto cleanup; + } + + rc = move_job(atoi(argv[1]), selected_uri); + + if (job_canceled) + rc = CUPS_BACKEND_OK; + +cleanup : + if (job_canceled) + rc = CUPS_BACKEND_OK; + + tmp_device_uri = (char *)cupsArrayFirst(printer_array); + do + { + free((void *)tmp_device_uri); + } while ((tmp_device_uri = (char *)cupsArrayNext(printer_array)) != NULL); + + cupsArrayDelete(printer_array); + sleep(2); + return (rc); +} + +/* + * 'check_printer()' - Checks the status of a remote printer and returns + * back a good/bad/busy status. + */ +int +check_printer(const char *device_uri) +{ + ipp_t *attributes = NULL; /* attributes for device_uri */ + ipp_attribute_t *tmp_attribute; /* for examining attribs */ + int rc = FO_PRINTER_GOOD; /* return code */ + char *reason; /* printer state reason */ + int i; + + fprintf(stderr, "DEBUG: Checking printer %s\n",device_uri); + + rc = get_printer_attributes(device_uri, &attributes); + if ( rc != CUPS_BACKEND_OK ) + { + fprintf(stderr, "DEBUG: Failed to get attributes from printer: %s\n", + device_uri); + if ( rc == CUPS_BACKEND_AUTH_REQUIRED ) + return (FO_AUTH_REQUIRED); + else + return (FO_PRINTER_BAD); + } + + /* + * Check if printer is accepting jobs + */ + if ((tmp_attribute = ippFindAttribute(attributes, + "printer-is-accepting-jobs", + IPP_TAG_BOOLEAN)) != NULL && + !tmp_attribute->values[0].boolean) + { + fprintf(stderr, + "DEBUG: Printer, %s, is not accepting jobs.\n", + device_uri); + + rc = FO_PRINTER_BAD; + } + + /* + * Check if printer is stopped or busy processing + */ + if ((tmp_attribute = ippFindAttribute(attributes, + "printer-state", + IPP_TAG_ENUM)) != NULL) + { + // Printer Stopped + if ( tmp_attribute->values[0].integer == IPP_PRINTER_STOPPED ) + { + fprintf(stderr, "DEBUG: Printer, %s, stopped.\n", device_uri); + rc = FO_PRINTER_BAD; + } + // Printer Busy + else if ( tmp_attribute->values[0].integer == IPP_PRINTER_PROCESSING ) + { + fprintf(stderr, "DEBUG: Printer %s is busy.\n", device_uri); + rc = FO_PRINTER_BUSY; + } + } + + /* + * Parse through the printer-state-reasons + */ + if ((tmp_attribute = ippFindAttribute(attributes, "printer-state-reasons", + IPP_TAG_KEYWORD)) != NULL) + { + for (i = 0; i < tmp_attribute->num_values; i++) + { + reason = tmp_attribute->values[i].string.text; + int len = strlen(reason); + + if (len > 8 && !strcmp(reason + len - 8, "-warning")) + { + fprintf(stderr, "DEBUG: Printer Supply Warning, %s\n", reason); + rc = FO_PRINTER_BAD; + } + else if (len > 6 && !strcmp(reason + len - 6, "-error")) + { + fprintf(stderr, "DEBUG: Printer Supply Error, %s\n", reason); + rc = FO_PRINTER_BAD; + } + } + } + + return (rc); +} + +/* + * 'read_config()' - Parses the failover and failover-retries options + * + */ +static int +read_config(cups_array_t *printer_array, int *retries, const char *options) +{ + + const char *tmp; /* temporary ptr */ + char *tok_tmp; /* temporary ptr for option parsing */ + int jobopts_count = 0; /* number of options */ + cups_option_t *jobopts = NULL; /* job options */ + + + fprintf(stderr, "DEBUG: Reading Configuration.\n"); + jobopts_count = cupsParseOptions(options, 0, &jobopts); + + if (!jobopts_count) + { + fprintf(stderr, + "ERROR: No job options! Cannot find failover options!\n"); + return (CUPS_BACKEND_STOP); + } + + /* + * Get attributes from the primary printer + */ + fprintf(stderr, "DEBUG: Searching for failover option.\n"); + + if ((tmp = cupsGetOption("failover", jobopts_count, jobopts)) != NULL) + { + fprintf(stderr, "DEBUG: Failover option contents: %s.\n", tmp); + + tok_tmp = strdup(tmp); + + tmp = strtok(tok_tmp, ","); + do + { + cupsArrayAdd(printer_array, strdup(tmp)); + } while ((tmp = strtok(NULL,",")) != NULL); + + free(tok_tmp); + } + else + { + /* + * The queue is misconfigured, so return back CUPS_BACKEND_STOP + */ + fprintf(stderr, "ERROR: failover option not specified!\n"); + return (CUPS_BACKEND_STOP); + } + + /* + * Get the failover-retries value, if it exists. + */ + fprintf(stderr, "DEBUG: Searching for failover-retries option.\n"); + + if ((tmp = cupsGetOption("failover-retries", + jobopts_count, jobopts)) != NULL) + { + fprintf(stderr, "DEBUG: failover-retries option contents: %s.\n", tmp); + *retries = atoi(tmp); + } + else + { + *retries = FAILOVER_DEFAULT_RETRIES; + fprintf(stderr, "DEBUG: Failed to get failover-retries option\n"); + fprintf(stderr, "DEBUG: Defaulted to %d retries\n", *retries); + } + + return (CUPS_BACKEND_OK); +} + +/* + * 'get_printer_attributes()' - Sends an IPP Get-Attributes request to + * a URI + */ +int +get_printer_attributes(const char *device_uri, ipp_t **attributes) +{ + char uri[HTTP_MAX_URI]; /* Updated URI without login */ + int version; /* IPP version */ + char scheme[256]; /* Scheme in URI */ + ipp_status_t ipp_status; /* Status of IPP request */ + char hostname[1024]; /* Hostname */ + char resource[1024]; /* Resource infoo */ + char addrname[256]; /* Address name */ + int port; /* IPP Port number */ + char portname[255]; /* Port as string */ + http_t *http; /* HTTP connection */ + ipp_t *request; /* IPP request */ + int rc = CUPS_BACKEND_OK; /* Return Code */ + char username[256]; /* Username for device URI */ + char *option_ptr; /* for parsing resource opts */ + const char * const pattrs[] = /* Printer attributes wanted */ + { + "printer-is-accepting-jobs", + "printer-state", + "printer-state-reasons" + }; + + if (job_canceled) + return (CUPS_BACKEND_OK); + + fprintf(stderr, "DEBUG: Getting Printer Attributes.\n"); + fprintf(stderr, "DEBUG: Device URL %s.\n", device_uri); + + /* + * Parse device_uri + */ + if (httpSeparateURI(HTTP_URI_CODING_ALL, device_uri, scheme, sizeof(scheme), + username, sizeof(username), hostname, sizeof(hostname), + &port, resource, sizeof(resource)) != HTTP_URI_OK) + { + fprintf(stderr, "ERROR: Problem parsing device_uri, %s\n", device_uri); + return (CUPS_BACKEND_STOP); + } + + if (!port) + port = IPP_PORT; + + sprintf(portname, "%d", port); + + fprintf(stderr, "DEBUG: Getting Printer Attributes.\n"); + + /* + * Configure password + */ + cupsSetPasswordCB(password_cb); + + /* + * reset, in case a previous attempt for + * another printer left residue + */ + cupsSetUser(NULL); + password = NULL; + password_retries = 0; + + if (*username) + { + if ((password = strchr(username, ':')) != NULL) + { + *password = '\0'; + password++; + } + + cupsSetUser(username); + } + else if (!getuid()) + { + const char *username_env; + + if ((username_env = getenv("AUTH_USERNAME")) != NULL) + { + cupsSetUser(username_env); + password = getenv("AUTH_PASSWORD"); + } + } + + /* + * Try connecting to the remote server... + */ + fprintf(stderr, "DEBUG: Connecting to %s:%d\n", hostname, port); + _cupsLangPuts(stderr, _("INFO: Connecting to printer...\n")); + + http = httpConnectEncrypt(hostname, port, cupsEncryption()); + + /* + * Deal the socket not being open. + */ + if (!http) + { + int error = errno; /* Connection error */ + + switch (error) + { + case EHOSTDOWN : + _cupsLangPuts(stderr, _("WARNING: " + "The printer may not exist or " + "is unavailable at this time.\n")); + break; + case EHOSTUNREACH : + _cupsLangPuts(stderr, _("WARNING: " + "The printer is unreachable at this " + "time.\n")); + break; + case ECONNREFUSED : + _cupsLangPuts(stderr, _("WARNING: " + "Connection Refused.\n")); + break; + default : + fprintf(stderr, "DEBUG: Connection error: %s\n", strerror(errno)); + break; + } + + rc = CUPS_BACKEND_FAILED; + sleep(5); + goto prt_available_cleanup; + } + + +#ifdef AF_INET6 + if (http->hostaddr->addr.sa_family == AF_INET6) + fprintf(stderr, "DEBUG: Connected to [%s]:%d (IPv6)...\n", + httpAddrString(http->hostaddr, addrname, sizeof(addrname)), + ntohs(http->hostaddr->ipv6.sin6_port)); + else +#endif /* AF_INET6 */ + if (http->hostaddr->addr.sa_family == AF_INET) + fprintf(stderr, "DEBUG: Connected to %s:%d (IPv4)...\n", + httpAddrString(http->hostaddr, addrname, sizeof(addrname)), + ntohs(http->hostaddr->ipv4.sin_port)); + + /* + * Search the resource string for options. + * We only care about version, for the moment. + */ + version = 11; + + if ((option_ptr = strchr(resource, '?')) != NULL) + { + *option_ptr++ = '\0'; + + if ((option_ptr = strstr(option_ptr, "version="))!=NULL) + { + int minor; /* minor version from URI */ + int major; /* major version from URI */ + char *version_str; /* ipp version */ + + option_ptr += 8; + version_str = option_ptr; + + while (*option_ptr && *option_ptr != '&' && *option_ptr != '+') + option_ptr++; + + if (*option_ptr) + *option_ptr = '\0'; + + sscanf(version_str, "%d.%d", &major, &minor); + + version = (major * 10) + minor; + + switch(version) + { + case 10 : + case 11 : + case 20 : + case 21 : + fprintf(stderr, + "DEBUG: Set version to %d from URI\n", + version); + break; + default : + _cupsLangPrintf(stderr, + _("DEBUG: Invalid version, %d, from URI. " + "Using default of 1.1 \n"), + version); + version = 11; + } + } + } + + + /* + * Build a URI for the printer. We can't use the URI in argv[0] + * because it might contain username:password information... + */ + if (httpAssembleURI(HTTP_URI_CODING_ALL, uri, sizeof(uri), scheme, NULL, + hostname, port, resource) != HTTP_URI_OK) + { + fprintf(stderr, "ERROR: Problem assembling printer URI from host %s, " + "port %d, resource %s\n", hostname, port, resource); + return (CUPS_BACKEND_STOP); + } + + /* + * Build the IPP request... + */ + request = ippNewRequest(IPP_GET_PRINTER_ATTRIBUTES); + request->request.op.version[0] = version / 10; + request->request.op.version[1] = version % 10; + + ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", + NULL, uri); + + ippAddStrings(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, + "requested-attributes", sizeof(pattrs) / sizeof(pattrs[0]), + NULL, pattrs); + + /* + * Do the request... + */ + fputs("DEBUG: Getting supported attributes...\n", stderr); + + fprintf(stderr, "DEBUG: IPP Request Structure Built.\n"); + + *attributes = cupsDoRequest(http, request, resource); + ipp_status = cupsLastError(); + + fprintf(stderr, "DEBUG: Get-Printer-Attributes: %s (%s)\n", + ippErrorString(ipp_status), cupsLastErrorString()); + + if (ipp_status > IPP_OK_CONFLICT) + { + fprintf(stderr, "DEBUG: Get-Printer-Attributes returned %s.\n", + ippErrorString(ipp_status)); + switch(ipp_status) + { + case IPP_FORBIDDEN : + case IPP_NOT_AUTHORIZED : + _cupsLangPuts(stderr, _("ERROR: Not Authorized.\n")); + rc = CUPS_BACKEND_AUTH_REQUIRED; + break; + case IPP_PRINTER_BUSY : + case IPP_SERVICE_UNAVAILABLE : + _cupsLangPuts(stderr, _("ERROR: " + "The printer is not responding.\n")); + rc = CUPS_BACKEND_FAILED; + break; + case IPP_BAD_REQUEST : + case IPP_VERSION_NOT_SUPPORTED : + fprintf(stderr, "ERROR: Destination does not support IPP version %d\n", + version); + case IPP_NOT_FOUND : + _cupsLangPuts(stderr, _("ERROR: " + "The printer configuration is incorrect or the " + "printer no longer exists.\n")); + rc = CUPS_BACKEND_STOP; + break; + default : + rc = CUPS_BACKEND_FAILED; + } + goto prt_available_cleanup; + } + +prt_available_cleanup : + httpClose(http); + return (rc); +} + +static int +move_job(int jobid, /* Job ID */ + const char *dest) /* Destination ipp address */ +{ + ipp_t *request; /* IPP Request */ + char job_uri[HTTP_MAX_URI]; /* job-uri */ + + http_t* http = httpConnectEncrypt(cupsServer(), ippPort(), cupsEncryption()); + + if (!http) + { + _cupsLangPrintf(stderr, + _("failover: Unable to connect to server: %s\n"), + strerror(errno)); + return (CUPS_BACKEND_FAILED); + } + + /* + * Build a CUPS_MOVE_JOB request, which requires the following + * attributes: + * + * job-uri/printer-uri + * job-printer-uri + * requesting-user-name + */ + + request = ippNewRequest(CUPS_MOVE_JOB); + + snprintf(job_uri, sizeof(job_uri), "ipp://localhost/jobs/%d", jobid); + ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "job-uri", NULL, + job_uri); + + ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_NAME, + "requesting-user-name", + NULL, cupsUser()); + + ippAddString(request, IPP_TAG_JOB, IPP_TAG_URI, "job-printer-uri", + NULL, dest); + + /* + * Do the request and get back a response... + */ + + ippDelete(cupsDoRequest(http, request, "/jobs")); + + httpClose(http); + + if (cupsLastError() > IPP_OK_CONFLICT) + { + _cupsLangPrintf(stderr, "failover: %s\n", cupsLastErrorString()); + return (CUPS_BACKEND_FAILED); + } + else + return (CUPS_BACKEND_OK); +} + +/* + * 'sigterm_handler()' - handles a sigterm, i.e. job canceled + */ +static void +sigterm_handler(int sig) +{ + if (!job_canceled) + { + write(2, "DEBUG: Got SIGTERM.\n", 20); + job_canceled = 1; + } + else + { + /* + * Job has already been canceled, so just exit + */ + exit(1); + } +} + +/* + * 'password_cb()' - Disable the password prompt for cupsDoFileRequest(). + */ +static const char * /* O - Password */ +password_cb(const char *prompt) /* I - Prompt (not used) */ +{ + auth_info_required = "username,password"; + password_retries++; + + if(password_retries < FAILOVER_PASSWORD_RETRIES_MAX) + return (password); + else + return (NULL); +} diff -up cups-2.3.0/backend/Makefile.failover cups-2.3.0/backend/Makefile --- cups-2.3.0/backend/Makefile.failover 2019-10-07 12:22:17.067627388 +0200 +++ cups-2.3.0/backend/Makefile 2019-10-07 12:24:17.046780985 +0200 @@ -22,6 +22,7 @@ include ../Makedefs RBACKENDS = \ ipp \ lpd \ + failover \ $(DNSSD_BACKEND) UBACKENDS = \ snmp \ @@ -45,6 +46,7 @@ LIBOBJS = \ OBJS = \ ipp.o \ lpd.o \ + failover.o \ dnssd.o \ snmp.o \ socket.o \ @@ -274,6 +276,13 @@ lpd: lpd.o ../cups/$(LIBCUPS) libbackend $(LD_CC) $(ALL_LDFLAGS) -o lpd lpd.o libbackend.a $(LINKCUPS) $(CODE_SIGN) -s "$(CODE_SIGN_IDENTITY)" $@ +# +# failover +# + +failover: failover.o ../cups/$(LIBCUPS) libbackend.a + echo Linking $@... + $(LD_CC) $(ALL_LDFLAGS) -o failover failover.o libbackend.a $(LINKCUPS) # # snmp