21 changed files with 2240 additions and 3 deletions
--- a/SOURCES/0001-Add-with-idle-exit-timeout-configure-option.patch
+++ b/SOURCES/0001-Add-with-idle-exit-timeout-configure-option.patch
@ -0,0 +1,33 @@
+diff -up cups-2.2.6/conf/cupsd.conf.in.idleexittimeout cups-2.2.6/conf/cupsd.conf.in
+--- cups-2.2.6/conf/cupsd.conf.in.idleexittimeout	2017-11-01 15:57:53.000000000 +0100
+++ cups-2.2.6/conf/cupsd.conf.in	2021-11-29 11:45:37.416058954 +0100
+@@ -22,6 +22,9 @@ DefaultAuthType Basic
+ # Web interface setting...
+ WebInterface @CUPS_WEBIF@
+ 
+# Timeout after cupsd exits if idle (applied only if cupsd runs on-demand - with -l)
+IdleExitTimeout @EXIT_TIMEOUT@
+
+ # Restrict access to the server...
+ <Location />
+   Order allow,deny
+diff -up cups-2.2.6/config-scripts/cups-defaults.m4.idleexittimeout cups-2.2.6/config-scripts/cups-defaults.m4
+--- cups-2.2.6/config-scripts/cups-defaults.m4.idleexittimeout	2021-11-29 11:45:37.416058954 +0100
+++ cups-2.2.6/config-scripts/cups-defaults.m4	2021-11-29 11:46:31.680612421 +0100
+@@ -425,3 +425,16 @@ esac
+ 
+ AC_SUBST(CUPS_WEBIF)
+ AC_DEFINE_UNQUOTED(CUPS_DEFAULT_WEBIF, $CUPS_DEFAULT_WEBIF)
+
+dnl Set default value of IdleExitTimeout
+AC_ARG_WITH([idle_exit_timeout], AS_HELP_STRING([--with-idle-exit-timeout], [set the default value for IdleExitTimeout, default=60]), [
+    AS_IF([test "x$withval" = "xno"], [
+	EXIT_TIMEOUT=0
+    ], [
+	EXIT_TIMEOUT=$withval
+    ])
+], [
+    EXIT_TIMEOUT=60
+])
+
+AC_SUBST([EXIT_TIMEOUT])
--- a/SOURCES/0001-Add-with-systemd-timeoutstartsec-configure-option.patch
+++ b/SOURCES/0001-Add-with-systemd-timeoutstartsec-configure-option.patch
@ -0,0 +1,33 @@
+diff -up cups-2.3.3op2/config-scripts/cups-defaults.m4.conf-timeoutstartsec cups-2.3.3op2/config-scripts/cups-defaults.m4
+--- cups-2.3.3op2/config-scripts/cups-defaults.m4.conf-timeoutstartsec	2021-11-29 13:50:14.568976028 +0100
+++ cups-2.3.3op2/config-scripts/cups-defaults.m4	2021-11-29 13:51:02.785567762 +0100
+@@ -482,3 +482,18 @@ AC_ARG_WITH([idle_exit_timeout], AS_HELP
+ ])
+ 
+ AC_SUBST([EXIT_TIMEOUT])
+
+dnl set TimeoutStartSec for cups.service
+dnl - if used as --without-*, it sets TimeoutStartSec to infinity
+AC_ARG_WITH([systemd-timeoutstartsec],
+    AS_HELP_STRING([--with-systemd-timeoutstartsec],
+	[set TimeoutStartSec value in cups.service, default=default value in systemd]), [
+    AS_IF([ test "x$withval" = "xno" ], [
+	TIMEOUTSTARTSEC="TimeoutStartSec=infinity"
+    ], [
+	TIMEOUTSTARTSEC="TimeoutStartSec=$withval"
+    ])
+], [
+    TIMEOUTSTARTSEC=""
+])
+AC_SUBST([TIMEOUTSTARTSEC])
+diff -up cups-2.3.3op2/scheduler/org.cups.cupsd.service.in.conf-timeoutstartsec cups-2.3.3op2/scheduler/org.cups.cupsd.service.in
+--- cups-2.3.3op2/scheduler/org.cups.cupsd.service.in.conf-timeoutstartsec	2021-11-29 13:50:14.551976172 +0100
+++ cups-2.3.3op2/scheduler/org.cups.cupsd.service.in	2021-11-29 13:50:14.568976028 +0100
+@@ -8,6 +8,7 @@ Requires=cups.socket
+ ExecStart=@sbindir@/cupsd -l
+ Type=notify
+ Restart=on-failure
+@TIMEOUTSTARTSEC@
+ 
+ [Install]
+ Also=cups.socket cups.path
--- a/SOURCES/0001-Fix-delays-printing-to-lpd-when-reserved-ports-are-e.patch
+++ b/SOURCES/0001-Fix-delays-printing-to-lpd-when-reserved-ports-are-e.patch
@ -0,0 +1,21 @@
+diff -up cups-2.3.3op2/backend/lpd.c.lpd-delay cups-2.3.3op2/backend/lpd.c
+--- cups-2.3.3op2/backend/lpd.c.lpd-delay	2021-02-01 22:10:25.000000000 +0100
+++ cups-2.3.3op2/backend/lpd.c	2023-06-28 17:28:52.465476261 +0200
+@@ -63,7 +63,7 @@ static int	abort_job = 0;		/* Non-zero i
+ 
+ #define RESERVE_NONE		0	/* Don't reserve a priviledged port */
+ #define RESERVE_RFC1179		1	/* Reserve port 721-731 */
+-#define RESERVE_ANY		2	/* Reserve port 1-1023 */
+#define RESERVE_ANY		2	/* Reserve port 512-1023 */
+ 
+ 
+ /*
+@@ -778,7 +778,7 @@ lpd_queue(const char      *hostname,	/*
+ 
+       if (lport < 721 && reserve == RESERVE_RFC1179)
+ 	lport = 731;
+-      else if (lport < 1)
+      else if (lport < 512)
+ 	lport = 1023;
+ 
+ #ifdef HAVE_GETEUID
--- a/SOURCES/0001-Log-result-of-httpGetHostname-BEFORE-closing-the-con.patch
+++ b/SOURCES/0001-Log-result-of-httpGetHostname-BEFORE-closing-the-con.patch
@ -0,0 +1,64 @@
+From ffd290b4ab247f82722927ba9b21358daa16dbf1 Mon Sep 17 00:00:00 2001
+From: Rose <83477269+AtariDreams@users.noreply.github.com>
+Date: Thu, 1 Jun 2023 11:33:39 -0400
+Subject: [PATCH] Log result of httpGetHostname BEFORE closing the connection
+
+httpClose frees the memory of con->http. This is problematic because httpGetHostname then tries to access the memory it points to.
+
+We have to log the hostname first.
+---
+ scheduler/client.c | 16 +++++++---------
+ 1 file changed, 7 insertions(+), 9 deletions(-)
+
+diff --git a/scheduler/client.c b/scheduler/client.c
+index 91e441188..327473a4d 100644
+--- a/scheduler/client.c
+++ b/scheduler/client.c
+@@ -193,13 +193,11 @@ cupsdAcceptClient(cupsd_listener_t *lis)/* I - Listener socket */
+    /*
+     * Can't have an unresolved IP address with double-lookups enabled...
+     */
+-
+-    httpClose(con->http);
+-
+     cupsdLogClient(con, CUPSD_LOG_WARN,
+-                    "Name lookup failed - connection from %s closed!",
+                    "Name lookup failed - closing connection from %s!",
+                     httpGetHostname(con->http, NULL, 0));
+ 
+    httpClose(con->http);
+     free(con);
+     return;
+   }
+@@ -235,11 +233,11 @@ cupsdAcceptClient(cupsd_listener_t *lis)/* I - Listener socket */
+       * with double-lookups enabled...
+       */
+ 
+-      httpClose(con->http);
+-
+       cupsdLogClient(con, CUPSD_LOG_WARN,
+-                      "IP lookup failed - connection from %s closed!",
+                      "IP lookup failed - closing connection from %s!",
+                       httpGetHostname(con->http, NULL, 0));
+
+      httpClose(con->http);
+       free(con);
+       return;
+     }
+@@ -256,11 +254,11 @@ cupsdAcceptClient(cupsd_listener_t *lis)/* I - Listener socket */
+ 
+   if (!hosts_access(&wrap_req))
+   {
+-    httpClose(con->http);
+-
+     cupsdLogClient(con, CUPSD_LOG_WARN,
+                     "Connection from %s refused by /etc/hosts.allow and "
+ 		    "/etc/hosts.deny rules.", httpGetHostname(con->http, NULL, 0));
+
+    httpClose(con->http);
+     free(con);
+     return;
+   }
+-- 
+2.41.0
+
--- a/SOURCES/0001-Require-authentication-for-CUPS-Get-Document.patch
+++ b/SOURCES/0001-Require-authentication-for-CUPS-Get-Document.patch
@ -0,0 +1,31 @@
+From a0c8b9c9556882f00c68b9727a95a1b6d1452913 Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Tue, 6 Dec 2022 09:04:01 -0500
+Subject: [PATCH] Require authentication for CUPS-Get-Document.
+
+---
+ conf/cupsd.conf.in | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/conf/cupsd.conf.in b/conf/cupsd.conf.in
+index b25884907..a07536f3e 100644
+--- a/conf/cupsd.conf.in
+++ b/conf/cupsd.conf.in
+@@ -68,7 +68,13 @@ IdleExitTimeout @EXIT_TIMEOUT@
+     Order deny,allow
+   </Limit>
+ 
+-  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
+  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job>
+    Require user @OWNER @SYSTEM
+    Order deny,allow
+  </Limit>
+
+  <Limit CUPS-Get-Document>
+    AuthType Default
+     Require user @OWNER @SYSTEM
+     Order deny,allow
+   </Limit>
+-- 
+2.41.0
+
--- a/SOURCES/0001-Update-man-pages-for-h-option-Issue-357.patch
+++ b/SOURCES/0001-Update-man-pages-for-h-option-Issue-357.patch
@ -0,0 +1,899 @@
+From 4d6787bd98c2fac8dcc58f34125d299d82e622aa Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Mon, 2 May 2022 15:35:20 -0400
+Subject: [PATCH] Update man pages for -h option (Issue #357)
+
+---
+ CHANGES.md                  |  1 +
+ doc/help/man-cancel.html    |  7 ++++---
+ doc/help/man-cupsctl.html   |  7 ++++---
+ doc/help/man-ipptool.html   |  6 ++++++
+ doc/help/man-lp.html        |  9 +++++----
+ doc/help/man-lpinfo.html    |  9 +++++----
+ doc/help/man-lpmove.html    |  9 +++++----
+ doc/help/man-lpoptions.html | 17 +++++++++--------
+ doc/help/man-lpq.html       |  5 +++--
+ doc/help/man-lpr.html       |  5 +++--
+ doc/help/man-lprm.html      |  6 +++---
+ doc/help/man-lpstat.html    |  5 +++--
+ man/cancel.1                |  9 +++++----
+ man/cupsctl.8               |  9 +++++----
+ man/lp.1                    | 11 ++++++-----
+ man/lpinfo.8                | 11 ++++++-----
+ man/lpmove.8                | 11 ++++++-----
+ man/lpoptions.1             | 19 ++++++++++---------
+ man/lpq.1                   |  7 ++++---
+ man/lpr.1                   |  7 ++++---
+ man/lprm.1                  |  8 ++++----
+ man/lpstat.1                | 11 ++++++-----
+ 22 files changed, 107 insertions(+), 82 deletions(-)
+
+diff --git a/doc/help/man-cancel.html b/doc/help/man-cancel.html
+index d51bb2b91..a0b52369c 100644
+--- a/doc/help/man-cancel.html
+++ b/doc/help/man-cancel.html
+@@ -12,6 +12,9 @@ cancel - cancel jobs
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>cancel</b>
+ [
+<b>-h</b>
+<i>hostname[:port]</i>
+] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+@@ -19,9 +22,6 @@ cancel - cancel jobs
+ ] [
+ <b>-a</b>
+ ] [
+-<b>-h</b>
+-<i>hostname[:port]</i>
+-] [
+ <b>-u</b>
+ <i>username</i>
+ ] [
+@@ -46,6 +46,7 @@ destinations if none is provided.
+ <dd style="margin-left: 5.0em">Forces encryption when connecting to the server.
+ <dt><b>-h </b><i>hostname</i>[<i>:port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
+Note: This option must occur before all others.
+ <dt><b>-U </b><i>username</i>
+ <dd style="margin-left: 5.0em">Specifies the username to use when connecting to the server.
+ <dt><b>-u </b><i>username</i>
+diff --git a/doc/help/man-cupsctl.html b/doc/help/man-cupsctl.html
+index b3f892ef9..e5c98dccb 100644
+--- a/doc/help/man-cupsctl.html
+++ b/doc/help/man-cupsctl.html
+@@ -12,14 +12,14 @@ cupsctl - configure cupsd.conf options
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>cupsctl</b>
+ [
+<b>-h</b>
+<i>server</i>[<b>:</b><i>port</i>]
+] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+ <i>username</i>
+ ] [
+-<b>-h</b>
+-<i>server</i>[<b>:</b><i>port</i>]
+-] [
+ <b>--</b>[<b>no-</b>]<b>debug-logging</b>
+ ] [
+ <b>--</b>[<b>no-</b>]<b>remote-admin</b>
+@@ -45,6 +45,7 @@ The following options are recognized:
+ <dd style="margin-left: 5.0em">Specifies an alternate username to use when authenticating with the scheduler.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies the server address.
+Note: This option must occur before all others.
+ <dt><b>--</b>[<b>no-</b>]<b>debug-logging</b>
+ <dd style="margin-left: 5.0em">Enables (disables) debug logging to the <i>error_log</i> file.
+ <dt><b>--</b>[<b>no-</b>]<b>remote-admin</b>
+diff --git a/doc/help/man-ipptool.html b/doc/help/man-ipptool.html
+index 81f67d77f..688454c69 100644
+--- a/doc/help/man-ipptool.html
+++ b/doc/help/man-ipptool.html
+@@ -59,6 +59,8 @@ ipptool - perform internet printing protocol requests
+ <b>-i</b>
+ <i>seconds</i>
+ ] [
+<b>-j</b>
+] [
+ <b>-n</b>
+ <i>repeat-count</i>
+ ] [
+@@ -150,6 +152,10 @@ This option is incompatible with the <b>-i</b> (interval) and <b>-n</b> (repeat-
+ <i>testfile</i>
+ should be repeated at the specified interval.
+ This option is incompatible with the <b>-X</b> (XML plist output) option.
+<dt><b>-j</b>
+<dd style="margin-left: 5.0em">Specifies that
+<b>ipptool</b>
+will produce JSON output.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Specifies that plain text output is desired.
+ <dt><b>-n</b><i> repeat-count</i>
+diff --git a/doc/help/man-lp.html b/doc/help/man-lp.html
+index f70c088d3..6442e900d 100644
+--- a/doc/help/man-lp.html
+++ b/doc/help/man-lp.html
+@@ -12,6 +12,8 @@ lp - print files
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lp</b>
+ [
+<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+@@ -21,8 +23,6 @@ lp - print files
+ ] [
+ <b>-d </b><i>destination</i>[<b>/</b><i>instance</i>]
+ ] [
+-<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+-] [
+ <b>-m</b>
+ ] [
+ <b>-n</b>
+@@ -51,6 +51,8 @@ lp - print files
+ <br>
+ <b>lp</b>
+ [
+<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+@@ -58,8 +60,6 @@ lp - print files
+ ] [
+ <b>-c</b>
+ ] [
+-<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+-] [
+ <b>-i</b>
+ <i>job-id</i>
+ ] [
+@@ -106,6 +106,7 @@ In CUPS, print files are always sent to the scheduler via IPP which has the same
+ <dd style="margin-left: 5.0em">Prints files to the named printer.
+ <dt><b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Chooses an alternate server.
+Note: This option must occur before all others.
+ <dt><b>-i </b><i>job-id</i>
+ <dd style="margin-left: 5.0em">Specifies an existing job to modify.
+ <dt><b>-m</b>
+diff --git a/doc/help/man-lpinfo.html b/doc/help/man-lpinfo.html
+index a1aed9421..30df7691c 100644
+--- a/doc/help/man-lpinfo.html
+++ b/doc/help/man-lpinfo.html
+@@ -12,10 +12,10 @@ lpinfo - show available devices or drivers (deprecated)
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpinfo</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
+<b>-E</b>
+] [
+ <b>-l</b>
+ ] [
+ <b>--device-id</b>
+@@ -40,10 +40,10 @@ lpinfo - show available devices or drivers (deprecated)
+ <br>
+ <b>lpinfo</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
+<b>-E</b>
+] [
+ <b>-l</b>
+ ] [
+ <b>--exclude-schemes</b>
+@@ -66,6 +66,7 @@ The first form (<i>-m</i>) lists the available drivers, while the second form (<
+ <dd style="margin-left: 5.0em">Forces encryption when connecting to the server.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Selects an alternate server.
+Note: This option must occur before all others.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Shows a "long" listing of devices or drivers.
+ <dt><b>--device-id </b><i>device-id-string</i>
+diff --git a/doc/help/man-lpmove.html b/doc/help/man-lpmove.html
+index d8019ee25..b0db753f9 100644
+--- a/doc/help/man-lpmove.html
+++ b/doc/help/man-lpmove.html
+@@ -12,10 +12,10 @@ lpmove - move a job or all jobs to a new destination
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpmove</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
+<b>-E</b>
+] [
+ <b>-U</b>
+ <i>username</i>
+ ]
+@@ -24,10 +24,10 @@ lpmove - move a job or all jobs to a new destination
+ <br>
+ <b>lpmove</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
+<b>-E</b>
+] [
+ <b>-U</b>
+ <i>username</i>
+ ]
+@@ -44,6 +44,7 @@ The <b>lpmove</b> command supports the following options:
+ <dd style="margin-left: 5.0em">Specifies an alternate username.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
+Note: This option must occur before all others.
+ </dl>
+ <h2 class="title"><a name="EXAMPLES">Examples</a></h2>
+ Move job 123 from "oldprinter" to "newprinter":
+diff --git a/doc/help/man-lpoptions.html b/doc/help/man-lpoptions.html
+index 6dda87f64..6af78290b 100644
+--- a/doc/help/man-lpoptions.html
+++ b/doc/help/man-lpoptions.html
+@@ -12,12 +12,12 @@
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpoptions</b>
+ [
+-<b>-E</b>
+-] [
+-<b>-U</b>
+-<i>username</i>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+] [
+<b>-E</b>
+] [
+<b>-U</b>
+<i>username</i>
+ ]
+ <b>-d </b><i>destination</i>[<b>/</b><i>instance</i>]
+ [
+@@ -26,26 +26,26 @@
+ <br>
+ <b>lpoptions</b>
+ [
+-<b>-E</b>
+-] [
+-<b>-U</b>
+-<i>username</i>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
+<b>-E</b>
+] [
+<b>-U</b>
+<i>username</i>
+] [
+ <b>-p </b><i>destination</i>[<b>/</b><i>instance</i>]
+ ]
+ <b>-o </b><i>option</i>[<b>=</b><i>value</i>] ...
+ <br>
+ <b>lpoptions</b>
+ [
+-<b>-E</b>
+-] [
+-<b>-U</b>
+-<i>username</i>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
+<b>-E</b>
+] [
+<b>-U</b>
+<i>username</i>
+] [
+ <b>-p </b><i>destination</i>[<b>/</b><i>instance</i>]
+ ]
+ <b>-r</b>
+@@ -53,12 +53,12 @@
+ <br>
+ <b>lpoptions</b>
+ [
+-<b>-E</b>
+-] [
+-<b>-U</b>
+-<i>username</i>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+] [
+<b>-E</b>
+] [
+<b>-U</b>
+<i>username</i>
+ ]
+ <b>-x </b><i>destination</i>[<b>/</b><i>instance</i>]
+ <h2 class="title"><a name="DESCRIPTION">Description</a></h2>
+@@ -84,6 +84,7 @@
+ This option overrides the system default printer for the current user.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Uses an alternate server.
+Note: This option must occur before all others.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Lists the printer specific options and their current settings.
+ <dt><b>-o </b><i>option</i>[<b>=</b><i>value</i>]
+@@ -119,7 +120,7 @@
+ <a href="man-lprm.html?TOPIC=Man+Pages"><b>lprm</b>(1),</a>
+ CUPS Online Help (<a href="http://localhost:631/help">http://localhost:631/help</a>)
+ <h2 class="title"><a name="COPYRIGHT">Copyright</a></h2>
+-Copyright &copy; 2007-2017 by Apple Inc.
+Copyright &copy; 2021-2022 by OpenPrinting.
+ 
+ </body>
+ </html>
+diff --git a/doc/help/man-lpq.html b/doc/help/man-lpq.html
+index 1c9e704ff..19e536d3c 100644
+--- a/doc/help/man-lpq.html
+++ b/doc/help/man-lpq.html
+@@ -12,13 +12,13 @@ lpq - show printer queue status
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpq</b>
+ [
+<b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+ <i>username</i>
+ ] [
+-<b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+-] [
+ <b>-P </b><i>destination</i>[<b>/</b><i>instance</i>]
+ ] [
+ <b>-a</b>
+@@ -44,6 +44,7 @@ Jobs queued on the default destination will be shown if no printer or class is s
+ <dd style="margin-left: 5.0em">Reports jobs on all printers.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
+Note: This option must occur before all others.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Requests a more verbose (long) reporting format.
+ </dl>
+diff --git a/doc/help/man-lpr.html b/doc/help/man-lpr.html
+index d044ab1a8..f9b19e1fe 100644
+--- a/doc/help/man-lpr.html
+++ b/doc/help/man-lpr.html
+@@ -12,10 +12,10 @@ lpr - print files
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpr</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-H </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
+<b>-E</b>
+] [
+ <b>-U</b>
+ <i>username</i>
+ ] [
+@@ -67,6 +67,7 @@ The following options are recognized by <i>lpr</i>:
+ <dd style="margin-left: 5.0em">Forces encryption when connecting to the server.
+ <dt><b>-H </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
+Note: This option must occur before all others.
+ <dt><b>-C "</b><i>name</i><b>"</b>
+ <dd style="margin-left: 5.0em"><dt><b>-J "</b><i>name</i><b>"</b>
+ <dd style="margin-left: 5.0em"><dt><b>-T "</b><i>name</i><b>"</b>
+diff --git a/doc/help/man-lprm.html b/doc/help/man-lprm.html
+index 7410320a3..dbe7f20de 100644
+--- a/doc/help/man-lprm.html
+++ b/doc/help/man-lprm.html
+@@ -12,14 +12,13 @@ lprm - cancel print jobs
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lprm</b>
+ [
+<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+ <i>username</i>
+ ] [
+-<b>-h</b>
+-<i>server</i>[<i>:port</i>]
+-] [
+ <b>-P</b>
+ <i>destination</i>[<i>/instance</i>]
+ ] [
+@@ -45,6 +44,7 @@ command supports the following options:
+ <dd style="margin-left: 5.0em">Specifies an alternate username.
+ <dt><b>-h </b><i>server</i>[<i>:port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
+Note: This option must occur before all others.
+ </dl>
+ <h2 class="title"><a name="CONFORMING_TO">Conforming To</a></h2>
+ The CUPS version of
+diff --git a/doc/help/man-lpstat.html b/doc/help/man-lpstat.html
+index f23089bbe..2c5dedc7c 100644
+--- a/doc/help/man-lpstat.html
+++ b/doc/help/man-lpstat.html
+@@ -12,6 +12,8 @@ lpstat - print cups status information
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpstat</b>
+ [
+<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+] [
+ <b>-E</b>
+ ] [
+ <b>-H</b>
+@@ -19,8 +21,6 @@ lpstat - print cups status information
+ <b>-U</b>
+ <i>username</i>
+ ] [
+-<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+-] [
+ <b>-l</b>
+ ] [
+ <b>-W</b>
+@@ -91,6 +91,7 @@ If no classes are specified then all classes are listed.
+ <dd style="margin-left: 5.0em">Shows all available destinations on the local network.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
+Note: This option must occur before all others.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Shows a long listing of printers, classes, or jobs.
+ <dt><b>-o </b>[<i>destination(s)</i>]
+diff --git a/man/cancel.man b/man/cancel.man
+index 34a5d9fc0..caea0ed69 100644
+--- a/man/cancel.man
+++ b/man/cancel.man
+@@ -10,12 +10,15 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH cancel 1 "CUPS" "15 April 2014" "Apple Inc."
+.TH cancel 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ cancel \- cancel jobs
+ .SH SYNOPSIS
+ .B cancel
+ [
+.B \-h
+.I hostname[:port]
+] [
+ .B \-E
+ ] [
+ .B \-U
+@@ -23,9 +26,6 @@
+ ] [
+ .B \-a
+ ] [
+-.B \-h
+-.I hostname[:port]
+-] [
+ .B \-u
+ .I username
+ ] [
+@@ -52,6 +52,7 @@
+ .TP 5
+ \fB\-h \fIhostname\fR[\fI:port\fR]
+ Specifies an alternate server.
+Note: This option must occur before all others.
+ .TP 5
+ \fB\-U \fIusername\fR
+ Specifies the username to use when connecting to the server.
+diff --git a/man/cupsctl.man b/man/cupsctl.man
+index 1b1ff4183..7e50d07ac 100644
+--- a/man/cupsctl.man
+++ b/man/cupsctl.man
+@@ -10,20 +10,20 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH cupsctl 8 "CUPS" "30 May 2016" "Apple Inc."
+.TH cupsctl 8 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ cupsctl \- configure cupsd.conf options
+ .SH SYNOPSIS
+ .B cupsctl
+ [
+.B \-h
+\fIserver\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-.B \-h
+-\fIserver\fR[\fB:\fIport\fR]
+-] [
+ \fB\-\-\fR[\fBno\-\fR]\fBdebug\-logging\fR
+ ] [
+ \fB\-\-\fR[\fBno\-\fR]\fBremote\-admin\fR
+@@ -51,6 +51,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Specifies the server address.
+Note: This option must occur before all others.
+ .TP 5
+ \fB\-\-\fR[\fBno\-\fR]\fBdebug\-logging\fR
+ Enables (disables) debug logging to the \fIerror_log\fR file.
+diff --git a/man/lp.man b/man/lp.man
+index a54f904a5..4bdd2de7b 100644
+--- a/man/lp.man
+++ b/man/lp.man
+@@ -10,12 +10,14 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lp 1 "CUPS" "2 May 2016" "Apple Inc."
+.TH lp 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lp \- print files
+ .SH SYNOPSIS
+ .B lp
+ [
+\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+@@ -25,8 +27,6 @@
+ ] [
+ \fB\-d \fIdestination\fR[\fB/\fIinstance\fR]
+ ] [
+-\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+-] [
+ .B \-m
+ ] [
+ .B \-n
+@@ -55,6 +55,8 @@
+ .br
+ .B lp
+ [
+\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+@@ -62,8 +64,6 @@
+ ] [
+ .B \-c
+ ] [
+-\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+-] [
+ .B \-i
+ .I job-id
+ ] [
+@@ -115,6 +115,7 @@
+ .TP 5
+ \fB\-h \fIhostname\fR[\fB:\fIport\fR]
+ Chooses an alternate server.
+Note: This option must occur before all others.
+ .TP 5
+ \fB\-i \fIjob-id\fR
+ Specifies an existing job to modify.
+diff --git a/man/lpinfo.man b/man/lpinfo.man
+index d238f9a60..d44b568d2 100644
+--- a/man/lpinfo.man
+++ b/man/lpinfo.man
+@@ -10,16 +10,16 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpinfo 8 "CUPS" "12 June 2014" "Apple Inc."
+.TH lpinfo 8 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpinfo \- show available devices or drivers
+ .SH SYNOPSIS
+ .B lpinfo
+ [
+-.B \-E
+-] [
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ] [
+.B \-E
+] [
+ .B \-l
+ ] [
+ .B \-\-device\-id
+@@ -44,10 +44,10 @@
+ .br
+ .B lpinfo
+ [
+-.B \-E
+-] [
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ] [
+.B \-E
+] [
+ .B \-l
+ ] [
+ .B \-\-exclude\-schemes
+@@ -71,6 +71,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Selects an alternate server.
+Note: This option must occur before all others.
+ .TP 5
+ .B \-l
+ Shows a "long" listing of devices or drivers.
+diff --git a/man/lpmove.man b/man/lpmove.man
+index af3c6b63c..62adba654 100644
+--- a/man/lpmove.man
+++ b/man/lpmove.man
+@@ -10,16 +10,16 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpmove 8 "CUPS" "26 May 2016" "Apple Inc."
+.TH lpmove 8 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpmove \- move a job or all jobs to a new destination
+ .SH SYNOPSIS
+ .B lpmove
+ [
+-.B \-E
+-] [
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ] [
+.B \-E
+] [
+ .B \-U
+ .I username
+ ]
+@@ -28,10 +28,10 @@
+ .br
+ .B lpmove
+ [
+-.B \-E
+-] [
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ] [
+.B \-E
+] [
+ .B \-U
+ .I username
+ ]
+@@ -50,6 +50,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Specifies an alternate server.
+Note: This option must occur before all others.
+ .SH EXAMPLES
+ Move job 123 from "oldprinter" to "newprinter":
+ .nf
+diff --git a/man/lpoptions.man.in b/man/lpoptions.man.in
+index 372f46a37..2eb5b6010 100644
+--- a/man/lpoptions.man.in
+++ b/man/lpoptions.man.in
+@@ -10,18 +10,18 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpoptions 1 "CUPS" "12 June 2014" "Apple Inc."
+.TH lpoptions 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpoptions \- display or set printer options and defaults
+ .SH SYNOPSIS
+ .B lpoptions
+ [
+\fB\-h \fIserver\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+-] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ]
+ \fB\-d \fIdestination\fR[\fB/\fIinstance\fR]
+ [
+@@ -30,13 +30,13 @@
+ .br
+ .B lpoptions
+ [
+\fB\-h \fIserver\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+-] [
+ \fB\-p \fIdestination\fR[\fB/\fIinstance\fR]
+ ]
+ \fB\-o \fIoption\fR[\fB=\fIvalue\fR] ...
+@@ -43,13 +43,13 @@
+ .br
+ .B lpoptions
+ [
+\fB\-h \fIserver\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+-] [
+ \fB\-p \fIdestination\fR[\fB/\fIinstance\fR]
+ ]
+ .B \-r
+@@ -57,12 +57,12 @@
+ .br
+ .B lpoptions
+ [
+\fB\-h \fIserver\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+-] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ]
+ \fB\-x \fIdestination\fR[\fB/\fIinstance\fR]
+ .SH DESCRIPTION
+@@ -96,6 +96,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Uses an alternate server.
+Note: This option must occur before all others.
+ .TP 5
+ .B \-l
+ Lists the printer specific options and their current settings.
+diff --git a/man/lpq.man b/man/lpq.man
+index ce23a6c81..a81633ecb 100644
+--- a/man/lpq.man
+++ b/man/lpq.man
+@@ -10,19 +10,19 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpq 1 "CUPS" "12 June 2014" "Apple Inc."
+.TH lpq 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpq \- show printer queue status
+ .SH SYNOPSIS
+ .B lpq
+ [
+\fB\-h \fIserver\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+-] [
+ \fB\-P \fIdestination\fR[\fB/\fIinstance\fR]
+ ] [
+ .B \-a
+@@ -53,6 +53,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Specifies an alternate server.
+Note: This option must occur before all others.
+ .TP 5
+ .B \-l
+ Requests a more verbose (long) reporting format.
+diff --git a/man/lpr.man b/man/lpr.man
+index e5f9f9018..77a62b305 100644
+--- a/man/lpr.man
+++ b/man/lpr.man
+@@ -10,16 +10,16 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpr 1 "CUPS" "2 May 2016" "Apple Inc."
+.TH lpr 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpr \- print files
+ .SH SYNOPSIS
+ .B lpr
+ [
+-.B \-E
+-] [
+ \fB\-H \fIserver\fR[\fB:\fIport\fR]
+ ] [
+.B \-E
+] [
+ .B \-U
+ .I username
+ ] [
+@@ -72,6 +72,7 @@
+ .TP 5
+ \fB\-H \fIserver\fR[\fB:\fIport\fR]
+ Specifies an alternate server.
+Note: This option must occur before all others.
+ .TP 5
+ \fB\-C "\fIname\fB"\fR
+ .TP 5
+diff --git a/man/lprm.man b/man/lprm.man
+index 094166539..0cf88ac51 100644
+--- a/man/lprm.man
+++ b/man/lprm.man
+@@ -10,20 +10,19 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lprm 1 "CUPS" "22 May 2014" "Apple Inc."
+.TH lprm 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lprm \- cancel print jobs
+ .SH SYNOPSIS
+ .B lprm
+ [
+\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-.B \-h
+-.IR server [ :port ]
+-] [
+ .B \-P
+ .IR destination [ /instance ]
+ ] [
+@@ -52,6 +51,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fI:port\fR]
+ Specifies an alternate server.
+Note: This option must occur before all others.
+ .SH CONFORMING TO
+ The CUPS version of
+ .B lprm
+diff --git a/man/lpstat.man b/man/lpstat.man
+index 0a10cd9bc..88acff7b3 100644
+--- a/man/lpstat.man
+++ b/man/lpstat.man
+@@ -1,8 +1,8 @@
+ .\"
+ .\" lpstat man page for CUPS.
+ .\"
+-.\" Copyright 2007-2017 by Apple Inc.
+-.\" Copyright 1997-2006 by Easy Software Products.
+.\" Copyright © 2007-2019 by Apple Inc.
+.\" Copyright © 1997-2006 by Easy Software Products.
+ .\"
+ .\" These coded instructions, statements, and computer programs are the
+ .\" property of Apple Inc. and are protected by Federal copyright
+@@ -10,12 +10,14 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpstat 1 "CUPS" "26 May 2017" "Apple Inc."
+.TH lpstat 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpstat \- print cups status information
+ .SH SYNOPSIS
+ .B lpstat
+ [
+\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+] [
+ .B \-E
+ ] [
+ .B \-H
+@@ -23,8 +25,6 @@
+ .B \-U
+ .I username
+ ] [
+-\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+-] [
+ .B \-l
+ ] [
+ .B \-W
+@@ -104,6 +104,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Specifies an alternate server.
+Note: This option must occur before all others.
+ .TP 5
+ .B \-l
+ Shows a long listing of printers, classes, or jobs.
--- a/SOURCES/0001-Use-cupsGetNamedDest-for-legacy-printing-APIs-Issue-.patch
+++ b/SOURCES/0001-Use-cupsGetNamedDest-for-legacy-printing-APIs-Issue-.patch
@ -0,0 +1,109 @@
+From 7271db11d27fe436f0c743bed3be8a5c6f93f2c2 Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Mon, 9 Apr 2018 09:50:19 -0400
+Subject: [PATCH] Use cupsGetNamedDest for legacy printing APIs (Issue #5288)
+
+---
+ cups/util.c                          | 59 +++++-----------------------
+ xcode/CUPS.xcodeproj/project.pbxproj |  6 ++-
+ 2 files changed, 15 insertions(+), 50 deletions(-)
+
+diff --git a/cups/util.c b/cups/util.c
+index ebc54d3cf..b15963e9e 100644
+--- a/cups/util.c
+++ b/cups/util.c
+@@ -21,19 +22,6 @@
+ #endif /* WIN32 || __EMX__ */
+ 
+ 
+-/*
+- * Enumeration data and callback...
+- */
+-
+-typedef struct _cups_createdata_s
+-{
+-  const char  *name;                    /* Destination name */
+-  cups_dest_t *dest;                    /* Matching destination */
+-} _cups_createdata_t;
+-
+-static int  cups_create_cb(_cups_createdata_t *data, unsigned flags, cups_dest_t *dest);
+-
+-
+ /*
+  * 'cupsCancelJob()' - Cancel a print job on the default server.
+  *
+@@ -168,7 +156,7 @@ cupsCreateJob(
+ {
+   int		job_id = 0;		/* job-id value */
+   ipp_status_t  status;                 /* Create-Job status */
+-  _cups_createdata_t data;              /* Enumeration data */
+  cups_dest_t	*dest;			/* Destination */
+   cups_dinfo_t  *info;                  /* Destination information */
+ 
+ 
+@@ -188,12 +176,7 @@ cupsCreateJob(
+   * Lookup the destination...
+   */
+ 
+-  data.name = name;
+-  data.dest = NULL;
+-
+-  cupsEnumDests(0, 1000, NULL, 0, 0, (cups_dest_cb_t)cups_create_cb, &data);
+-
+-  if (!data.dest)
+  if ((dest = cupsGetNamedDest(http, name, NULL)) == NULL)
+   {
+     DEBUG_puts("1cupsCreateJob: Destination not found.");
+     _cupsSetError(IPP_STATUS_ERROR_INTERNAL, strerror(ENOENT), 0);
+@@ -205,18 +188,18 @@ cupsCreateJob(
+   */
+ 
+   DEBUG_puts("1cupsCreateJob: Querying destination info.");
+-  if ((info = cupsCopyDestInfo(http, data.dest)) == NULL)
+  if ((info = cupsCopyDestInfo(http, dest)) == NULL)
+   {
+     DEBUG_puts("1cupsCreateJob: Query failed.");
+-    cupsFreeDests(1, data.dest);
+    cupsFreeDests(1, dest);
+     return (0);
+   }
+ 
+-  status = cupsCreateDestJob(http, data.dest, info, &job_id, title, num_options, options);
+  status = cupsCreateDestJob(http, dest, info, &job_id, title, num_options, options);
+   DEBUG_printf(("1cupsCreateJob: cupsCreateDestJob returned %04x (%s)", status, ippErrorString(status)));
+ 
+   cupsFreeDestInfo(info);
+-  cupsFreeDests(1, data.dest);
+  cupsFreeDests(1, dest);
+ 
+  /*
+   * Return the job...
+@@ -968,25 +951,3 @@ cupsStartDocument(
+   return (status);
+ }
+ 
+-
+-/*
+- * 'cups_create_cb()' - Find the destination for printing.
+- */
+-
+-static int                              /* O - 0 on match */
+-cups_create_cb(
+-    _cups_createdata_t *data,           /* I - Data from cupsCreateJob call */
+-    unsigned           flags,           /* I - Enumeration flags */
+-    cups_dest_t        *dest)           /* I - Destination */
+-{
+-  DEBUG_printf(("2cups_create_cb(data=%p(%s), flags=%08x, dest=%p(%s))", (void *)data, data->name, flags, (void *)dest, dest->name));
+-
+-  (void)flags;
+-
+-  if (dest->instance || strcasecmp(data->name, dest->name))
+-    return (1);
+-
+-  cupsCopyDest(dest, 0, &data->dest);
+-
+-  return (0);
+-}
+-- 
+2.35.1
+
--- a/SOURCES/0001-Use-purge-job-instead-of-purge-jobs-when-canceling-a.patch
+++ b/SOURCES/0001-Use-purge-job-instead-of-purge-jobs-when-canceling-a.patch
@ -0,0 +1,48 @@
+From c5ad7aaf6c8063a39974c6b4a3cf59b7f912daae Mon Sep 17 00:00:00 2001
+From: Bryan Mason <bmason@redhat.com>
+Date: Tue, 27 Jun 2023 04:18:46 -0700
+Subject: [PATCH 1/2] Use "purge-job" instead of "purge-jobs" when canceling a
+ single job (#742)
+
+The command "cancel -x <job>" adds "purge-jobs true" to the Cancel-Job
+operation; however, the correct attribute to use for Cancel-job is
+"purge-job" (singular), not "purge-jobs" (plural).  As a result, job
+files are not removed from /var/spool/cups when "cancel -x <job>" is
+executed.
+
+This patch resolves the issue by adding "purge-job" when the IPP
+operation is Cancel-Job and "purge-jobs" for other IPP operations
+(Purge-Jobs, Cancel-Jobs, and Cancel-My-Jobs)
+---
+ systemv/cancel.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/systemv/cancel.c b/systemv/cancel.c
+index 572f413e1..f5b8e12b5 100644
+--- a/systemv/cancel.c
+++ b/systemv/cancel.c
+@@ -260,6 +260,7 @@ main(int  argc,				/* I - Number of command-line arguments */
+       *    attributes-natural-language
+       *    printer-uri + job-id *or* job-uri
+       *    [requesting-user-name]
+      *    [purge-job] or [purge-jobs]
+       */
+ 
+       request = ippNewRequest(op);
+@@ -294,7 +295,12 @@ main(int  argc,				/* I - Number of command-line arguments */
+                      "requesting-user-name", NULL, cupsUser());
+ 
+       if (purge)
+-	ippAddBoolean(request, IPP_TAG_OPERATION, "purge-jobs", (char)purge);
+      {
+	if (op == IPP_CANCEL_JOB)
+	  ippAddBoolean(request, IPP_TAG_OPERATION, "purge-job", (char)purge);
+	else
+	  ippAddBoolean(request, IPP_TAG_OPERATION, "purge-jobs", (char)purge);
+      }
+ 
+      /*
+       * Do the request and get back a response...
+-- 
+2.41.0
+
--- a/SOURCES/0001-cups-http-addr.c-Set-listen-backlog-size-to-INT_MAX-.patch
+++ b/SOURCES/0001-cups-http-addr.c-Set-listen-backlog-size-to-INT_MAX-.patch
@ -0,0 +1,35 @@
+From 876fdc1c90a885a58644c8757bc1283c9fd5bcb7 Mon Sep 17 00:00:00 2001
+From: Vasilis Liaskovitis <vliaskovitis@suse.com>
+Date: Wed, 1 Mar 2023 13:46:28 +0100
+Subject: [PATCH] cups/http-addr.c: Set listen backlog size to INT_MAX (fixes
+ #308)
+
+Use a listen queue size of INT_MAX, which should default to the maximum
+supported queue size on the system.
+
+This avoids the problem of the listening backlog queue getting full when
+there are too many requests at the same time. The problem was observed
+with the previous backlog size (128) by customers when submitting large
+batches of print jobs, resulting in some jobs getting lost.
+
+Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com>
+---
+ cups/http-addr.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/cups/http-addr.c b/cups/http-addr.c
+index a61ee0449..6aeeb8074 100644
+--- a/cups/http-addr.c
+++ b/cups/http-addr.c
+@@ -249,7 +249,7 @@ httpAddrListen(http_addr_t *addr,	/* I - Address to bind to */
+   * Listen...
+   */
+ 
+-  if (listen(fd, 5))
+  if (listen(fd, INT_MAX))
+   {
+     _cupsSetHTTPError(HTTP_STATUS_ERROR);
+ 
+-- 
+2.41.0
+
--- a/SOURCES/0001-cups-strlcpy-handle-zero-size.patch
+++ b/SOURCES/0001-cups-strlcpy-handle-zero-size.patch
@ -0,0 +1,26 @@
+From 5e3107e734f06d410a490e8bc923dc3119f17671 Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Wed, 17 May 2023 12:59:57 -0400
+Subject: [PATCH] Consensus fix.
+
+---
+ cups/string.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/cups/string.c b/cups/string.c
+index 00454203c..b4fc12050 100644
+--- a/cups/string.c
+++ b/cups/string.c
+@@ -730,6 +731,9 @@ _cups_strlcpy(char       *dst,		/* O - Destination string */
+   size_t	srclen;			/* Length of source string */
+ 
+ 
+  if (size == 0)
+    return (0);
+
+  /*
+   * Figure out how much room is needed...
+   */
+-- 
+2.40.1
+
--- a/SOURCES/0001-cups-tls-gnutls.c-Use-always-GNUTLS_SHUT_WR.patch
+++ b/SOURCES/0001-cups-tls-gnutls.c-Use-always-GNUTLS_SHUT_WR.patch
@ -0,0 +1,55 @@
+From bdb1ca45454d90410031c4c2054005a995f76180 Mon Sep 17 00:00:00 2001
+From: Zdenek Dohnal <zdohnal@redhat.com>
+Date: Wed, 6 Apr 2022 15:04:45 +0200
+Subject: [PATCH] cups/tls-gnutls.c: Use always GNUTLS_SHUT_WR
+
+The current mode for `gnutls_bye()` in client use cases strictly
+follows TLS v1.2 standard, which in this particular part says:
+
+```
+Unless some other fatal alert has been transmitted, each party is
+required to send a close_notify alert before closing the write
+side of the connection.  The other party MUST respond with a
+close_notify alert of its own and close down the connection immediately,
+discarding any pending writes.  It is not required for the initiator
+of the close to wait for the responding close_notify alert before
+closing the read side of the connection.
+```
+
+and waits for the other side of TLS connection to confirm the close.
+
+Unfortunately it can undesired for reasons:
+- we support switching of TLS versions in CUPS, and this mode strictly
+  follows TLS v1.2 - so for older version this behavior is not expected
+  and can cause delays
+- even some TLS v1.2 implementations (like Windows Server 2016) don't
+  comply TLS v1.2 behavior even if it says it does - in that case,
+  encrypted printing takes 30s till HTTP timeout is reached, because the
+  other side didn't send confirmation
+- AFAIU openssl's SSL_shutdown() doesn't make this TLS v1.2 difference,
+  so we could end up with two TLS implementations in CUPS which will
+  behave differently
+
+Since the standard defines that waiting for confirmation is not required
+and due the problems above, I would propose using GNUTLS_SHUT_WR mode
+regardless of HTTP mode.
+---
+ cups/tls-gnutls.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/cups/tls-gnutls.c b/cups/tls-gnutls.c
+index c55995b2b..f87b4f4df 100644
+--- a/cups/tls-gnutls.c
+++ b/cups/tls-gnutls.c
+@@ -1667,7 +1667,7 @@ _httpTLSStop(http_t *http)		/* I - Connection to server */
+   int	error;				/* Error code */
+ 
+ 
+-  error = gnutls_bye(http->tls, http->mode == _HTTP_MODE_CLIENT ? GNUTLS_SHUT_RDWR : GNUTLS_SHUT_WR);
+  error = gnutls_bye(http->tls, GNUTLS_SHUT_WR);
+   if (error != GNUTLS_E_SUCCESS)
+     _cupsSetError(IPP_STATUS_ERROR_INTERNAL, gnutls_strerror(errno), 0);
+ 
+-- 
+2.35.1
+
--- a/SOURCES/0001-httpAddrConnect2-Check-for-error-if-POLLHUP-is-in-va.patch
+++ b/SOURCES/0001-httpAddrConnect2-Check-for-error-if-POLLHUP-is-in-va.patch
@ -0,0 +1,43 @@
+diff -up cups-2.2.6/cups/http-addrlist.c.cupsgetjobs-pollhup cups-2.2.6/cups/http-addrlist.c
+--- cups-2.2.6/cups/http-addrlist.c.cupsgetjobs-pollhup	2023-12-19 18:25:15.484637450 +0100
+++ cups-2.2.6/cups/http-addrlist.c	2023-12-19 18:28:57.129163387 +0100
+@@ -313,6 +313,39 @@ httpAddrConnect2(
+       {
+ #  ifdef HAVE_POLL
+ 	DEBUG_printf(("pfds[%d].revents=%x\n", i, pfds[i].revents));
+
+#    ifdef _WIN32
+	if (((WSAGetLastError() == WSAEINPROGRESS) && (pfds[i].revents & POLLIN) && (pfds[i].revents & POLLOUT)) ||
+	    ((pfds[i].revents & POLLHUP) && (pfds[i].revents & (POLLIN|POLLOUT))))
+#    else
+	if (((errno == EINPROGRESS) && (pfds[i].revents & POLLIN) && (pfds[i].revents & POLLOUT)) ||
+	    ((pfds[i].revents & POLLHUP) && (pfds[i].revents & (POLLIN|POLLOUT))))
+#    endif /* _WIN32 */
+	{
+	  // Some systems generate POLLIN or POLLOUT together with POLLHUP when doing
+	  // asynchronous connections. The solution seems to be to use getsockopt to
+	  // check the SO_ERROR value and ignore the POLLHUP if there is no error or
+	  // the error is EINPROGRESS.
+
+	  int	    sres,		 /* Return value from getsockopt() - 0, or -1 if error */
+		    serr;		 /* Option SO_ERROR value */
+	  socklen_t slen = sizeof(serr); /* Option value size */
+
+	  sres = getsockopt(fds[i], SOL_SOCKET, SO_ERROR, &serr, &slen);
+
+	  if (sres || serr)
+	  {
+	    pfds[i].revents |= POLLERR;
+#    ifdef DEBUG
+	    DEBUG_printf(("1httpAddrConnect2: getsockopt returned: %d with error: %s", sres, strerror(serr)));
+#    endif
+	  }
+	  else if (pfds[i].revents && (pfds[i].revents & POLLHUP) && (pfds[i].revents & (POLLIN | POLLOUT)))
+	  {
+	    pfds[i].revents &= ~POLLHUP;
+	  }
+	}
+
+ 	if (pfds[i].revents && !(pfds[i].revents & (POLLERR | POLLHUP)))
+ #  else
+ 	if (FD_ISSET(fds[i], &input_set) && !FD_ISSET(fds[i], &error_set))
--- a/SOURCES/0001-scheduler-cert.c-Fix-string-comparison-fixes-CVE-202.patch
+++ b/SOURCES/0001-scheduler-cert.c-Fix-string-comparison-fixes-CVE-202.patch
@ -0,0 +1,35 @@
+From de4f8c196106033e4c372dce3e91b9d42b0b9444 Mon Sep 17 00:00:00 2001
+From: Zdenek Dohnal <zdohnal@redhat.com>
+Date: Thu, 26 May 2022 06:27:04 +0200
+Subject: [PATCH] scheduler/cert.c: Fix string comparison (fixes
+ CVE-2022-26691)
+
+The previous algorithm didn't expect the strings can have a different
+length, so one string can be a substring of the other and such substring
+was reported as equal to the longer string.
+---
+ CHANGES.md       | 1 +
+ scheduler/cert.c | 9 ++++++++-
+ 2 files changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/scheduler/cert.c b/scheduler/cert.c
+index b268bf1b2..9b65b96c9 100644
+--- a/scheduler/cert.c
+++ b/scheduler/cert.c
+@@ -444,5 +444,12 @@ ctcompare(const char *a,		/* I - First string */
+     b ++;
+   }
+ 
+-  return (result);
+ /*
+  * The while loop finishes when *a == '\0' or *b == '\0'
+  * so after the while loop either both *a and *b == '\0',
+  * or one points inside a string, so when we apply bitwise OR on *a,
+  * *b and result, we get a non-zero return value if the compared strings don't match.
+  */
+
+  return (result | *a | *b);
+ }
+-- 
+2.36.1
+
--- a/SOURCES/0001-scheduler-conf.c-Print-to-stderr-if-we-don-t-open-cu.patch
+++ b/SOURCES/0001-scheduler-conf.c-Print-to-stderr-if-we-don-t-open-cu.patch
@ -0,0 +1,36 @@
+From db9cecdd932e58c51d2d659f63415ad47d151717 Mon Sep 17 00:00:00 2001
+From: Zdenek Dohnal <zdohnal@redhat.com>
+Date: Fri, 1 Sep 2023 17:11:54 +0200
+Subject: [PATCH] scheduler/conf.c: Print to stderr if we don't open
+ cups-files.conf
+
+In case cupsd can't open the cups-files.conf, the error message is lost
+if journal and syslog don't exist or work on system (usually in
+containers).
+
+Log the error into stderr at this place to get the error message if
+needed.
+---
+ scheduler/conf.c | 6 +-----
+ 1 file changed, 1 insertion(+), 5 deletions(-)
+
+diff --git a/scheduler/conf.c b/scheduler/conf.c
+index b18535162..4fa7eb1df 100644
+--- a/scheduler/conf.c
+++ b/scheduler/conf.c
+@@ -811,11 +811,7 @@ cupsdReadConfiguration(void)
+     cupsdLogMessage(CUPSD_LOG_INFO, "No %s, using defaults.", CupsFilesFile);
+   else
+   {
+-#ifdef HAVE_SYSTEMD_SD_JOURNAL_H
+-    sd_journal_print(LOG_ERR, "Unable to open \"%s\" - %s", CupsFilesFile, strerror(errno));
+-#else
+-    syslog(LOG_LPR, "Unable to open \"%s\" - %s", CupsFilesFile, strerror(errno));
+-#endif /* HAVE_SYSTEMD_SD_JOURNAL_H */
+    fprintf(stderr, "Unable to read \"%s\" - %s\n", CupsFilesFile, strerror(errno));
+ 
+     return (0);
+   }
+-- 
+2.41.0
+
--- a/SOURCES/cups-cupsd-too-chatty.patch
+++ b/SOURCES/cups-cupsd-too-chatty.patch
@ -0,0 +1,12 @@
+diff -Napur cups-2.2.6-old/scheduler/job.c cups-2.2.6-new/scheduler/job.c
+--- cups-2.2.6-old/scheduler/job.c	2022-04-12 17:32:00.635282080 -0700
+++ cups-2.2.6-new/scheduler/job.c	2022-04-12 17:33:34.349452614 -0700
+@@ -474,7 +474,7 @@ cupsdCleanJobs(void)
+         cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing from history.");
+         cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+       }
+-      else if (job->file_time && job->file_time <= curtime)
+      else if (job->file_time && job->file_time <= curtime && job->num_files > 0)
+       {
+         cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing document files.");
+         remove_job_files(job);
--- a/SOURCES/cups-ippeve-web-support.patch
+++ b/SOURCES/cups-ippeve-web-support.patch
@ -0,0 +1,315 @@
+diff --git a/cgi-bin/admin.c b/cgi-bin/admin.c
+index a604a8a..e678f24 100644
+--- a/cgi-bin/admin.c
+++ b/cgi-bin/admin.c
+@@ -974,6 +974,13 @@ do_am_printer(http_t *http,		/* I - HTTP connection */
+ 
+         cgiSetVariable("TEMPLATE_NAME", template);
+       }
+
+     /*
+      * Set DEVICE_URI to the actual device uri, without make and model from
+      * html form.
+      */
+
+      cgiSetVariable("DEVICE_URI", var);
+     }
+   }
+ 
+@@ -1137,6 +1144,8 @@ do_am_printer(http_t *http,		/* I - HTTP connection */
+   else if (!file &&
+            (!cgiGetVariable("PPD_NAME") || cgiGetVariable("SELECT_MAKE")))
+   {
+    int ipp_everywhere = !strncmp(var, "ipp://", 6) || !strncmp(var, "ipps://", 7) || (!strncmp(var, "dnssd://", 8) && (strstr(var, "_ipp._tcp") || strstr(var, "_ipps._tcp")));
+
+     if (modify && !cgiGetVariable("SELECT_MAKE"))
+     {
+      /*
+@@ -1282,9 +1291,8 @@ do_am_printer(http_t *http,		/* I - HTTP connection */
+         cgiStartHTML(title);
+ 	if (!cgiGetVariable("PPD_MAKE"))
+ 	  cgiSetVariable("PPD_MAKE", cgiGetVariable("CURRENT_MAKE"));
+-	if (!modify)
+-	  cgiSetVariable("CURRENT_MAKE_AND_MODEL",
+-	                 cgiGetArray("PPD_MAKE_AND_MODEL", 0));
+        if (ipp_everywhere)
+	  cgiSetVariable("SHOW_IPP_EVERYWHERE", "1");
+ 	cgiCopyTemplateLang("choose-model.tmpl");
+         cgiEndHTML();
+       }
+@@ -4219,6 +4227,11 @@ get_printer_ppd(const char *uri,	/* I - Printer URI */
+ 		host[256],		/* Hostname */
+ 		resource[256];		/* Resource path */
+   int		port;			/* Port number */
+  static const char * const pattrs[] =	/* Printer attributes we need */
+  {
+    "all",
+    "media-col-database"
+  };
+ 
+ 
+  /*
+@@ -4259,6 +4272,7 @@ get_printer_ppd(const char *uri,	/* I - Printer URI */
+ 
+   request = ippNewRequest(IPP_OP_GET_PRINTER_ATTRIBUTES);
+   ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", NULL, uri);
+  ippAddStrings(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes",  (int)(sizeof(pattrs) / sizeof(pattrs[0])), NULL, pattrs);
+   response = cupsDoRequest(http, request, resource);
+ 
+   if (!_ppdCreateFromIPP(buffer, bufsize, response))
+diff --git a/cups/ppd-cache.c b/cups/ppd-cache.c
+index e5f89ee..b8139c8 100644
+--- a/cups/ppd-cache.c
+++ b/cups/ppd-cache.c
+@@ -3089,8 +3089,8 @@ _ppdCreateFromIPP(char   *buffer,	/* I - Filename buffer */
+   cupsFilePrintf(fp, "*Manufacturer: \"%s\"\n", make);
+   cupsFilePrintf(fp, "*ModelName: \"%s\"\n", model);
+   cupsFilePrintf(fp, "*Product: \"(%s)\"\n", model);
+-  cupsFilePrintf(fp, "*NickName: \"%s\"\n", model);
+-  cupsFilePrintf(fp, "*ShortNickName: \"%s\"\n", model);
+  cupsFilePrintf(fp, "*NickName: \"%s - IPP Everywhere\"\n", model);
+  cupsFilePrintf(fp, "*ShortNickName: \"%s - IPP Everywhere\"\n", model);
+ 
+   if ((attr = ippFindAttribute(response, "color-supported", IPP_TAG_BOOLEAN)) != NULL && ippGetBoolean(attr, 0))
+     cupsFilePuts(fp, "*ColorDevice: True\n");
+diff --git a/scheduler/ipp.c b/scheduler/ipp.c
+index 5e9a985..4ed3c39 100644
+--- a/scheduler/ipp.c
+++ b/scheduler/ipp.c
+@@ -5829,6 +5829,12 @@ create_local_bg_thread(
+   ipp_t		*request,		/* Request to printer */
+ 		*response;		/* Response from printer */
+   ipp_attribute_t *attr;		/* Attribute in response */
+  ipp_status_t	status;			/* Status code */
+  static const char * const pattrs[] =	/* Printer attributes we need */
+  {
+    "all",
+    "media-col-database"
+  };
+ 
+ 
+  /*
+@@ -5861,12 +5867,35 @@ create_local_bg_thread(
+   cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: Connected to %s:%d, sending Get-Printer-Attributes request...", printer->name, host, port);
+ 
+   request = ippNewRequest(IPP_OP_GET_PRINTER_ATTRIBUTES);
+  ippSetVersion(request, 2, 0);
+   ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", NULL, printer->device_uri);
+-  ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes", NULL, "all");
+  ippAddStrings(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes", (int)(sizeof(pattrs) / sizeof(pattrs[0])), NULL, pattrs);
+ 
+   response = cupsDoRequest(http, request, resource);
+  status   = cupsLastError();
+
+  cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: Get-Printer-Attributes returned %s (%s)", printer->name, ippErrorString(cupsLastError()), cupsLastErrorString());
+
+  if (status == IPP_STATUS_ERROR_BAD_REQUEST || status == IPP_STATUS_ERROR_VERSION_NOT_SUPPORTED)
+  {
+   /*
+    * Try request using IPP/1.1, in case we are talking to an old CUPS server or
+    * printer...
+    */
+ 
+-  cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: Get-Printer-Attributes returned %s", printer->name, ippErrorString(cupsLastError()));
+    ippDelete(response);
+
+    cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: Re-sending Get-Printer-Attributes request using IPP/1.1...", printer->name);
+
+    request = ippNewRequest(IPP_OP_GET_PRINTER_ATTRIBUTES);
+    ippSetVersion(request, 1, 1);
+    ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", NULL, printer->device_uri);
+    ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes", NULL, "all");
+
+    response = cupsDoRequest(http, request, resource);
+
+    cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: IPP/1.1 Get-Printer-Attributes returned %s (%s)", printer->name, ippErrorString(cupsLastError()), cupsLastErrorString());
+  }
+ 
+   // TODO: Grab printer icon file...
+   httpClose(http);
+@@ -5877,6 +5906,8 @@ create_local_bg_thread(
+ 
+   if (_ppdCreateFromIPP(fromppd, sizeof(fromppd), response))
+   {
+    _cupsRWLockWrite(&printer->lock);
+
+     if ((!printer->info || !*(printer->info)) && (attr = ippFindAttribute(response, "printer-info", IPP_TAG_TEXT)) != NULL)
+       cupsdSetString(&printer->info, ippGetString(attr, 0, NULL));
+ 
+@@ -5886,6 +5917,8 @@ create_local_bg_thread(
+     if ((!printer->geo_location || !*(printer->geo_location)) && (attr = ippFindAttribute(response, "printer-geo-location", IPP_TAG_URI)) != NULL)
+       cupsdSetString(&printer->geo_location, ippGetString(attr, 0, NULL));
+ 
+    _cupsRWUnlock(&printer->lock);
+
+     if ((from = cupsFileOpen(fromppd, "r")) == NULL)
+     {
+       cupsdLogMessage(CUPSD_LOG_ERROR, "%s: Unable to read generated PPD: %s", printer->name, strerror(errno));
+diff --git a/systemv/lpadmin.c b/systemv/lpadmin.c
+index bb53565..f3510ca 100644
+--- a/systemv/lpadmin.c
+++ b/systemv/lpadmin.c
+@@ -33,7 +33,7 @@ static int		delete_printer_from_class(http_t *http, char *printer,
+ static int		delete_printer_option(http_t *http, char *printer,
+ 			                      char *option);
+ static int		enable_printer(http_t *http, char *printer);
+-static char		*get_printer_ppd(const char *uri, char *buffer, size_t bufsize);
+static char		*get_printer_ppd(const char *uri, char *buffer, size_t bufsize, int *num_options, cups_option_t **options);
+ static cups_ptype_t	get_printer_type(http_t *http, char *printer, char *uri,
+ 			                 size_t urisize);
+ static int		set_printer_options(http_t *http, char *printer,
+@@ -593,7 +593,7 @@ main(int  argc,			/* I - Number of command-line arguments */
+ 
+   if ((ppd_name = cupsGetOption("ppd-name", num_options, options)) != NULL && !strcmp(ppd_name, "everywhere") && (device_uri = cupsGetOption("device-uri", num_options, options)) != NULL)
+   {
+-    if ((file = get_printer_ppd(device_uri, evefile, sizeof(evefile))) == NULL)
+    if ((file = get_printer_ppd(device_uri, evefile, sizeof(evefile), &num_options, &options)) == NULL)
+       return (1);
+ 
+     num_options = cupsRemoveOption("ppd-name", num_options, &options);
+@@ -1144,20 +1144,29 @@ enable_printer(http_t *http,		/* I - Server connection */
+  * 'get_printer_ppd()' - Get an IPP Everywhere PPD file for the given URI.
+  */
+ 
+-static char *				/* O - Filename or NULL */
+-get_printer_ppd(const char *uri,	/* I - Printer URI */
+-                char       *buffer,	/* I - Filename buffer */
+-		size_t     bufsize)	/* I - Size of filename buffer */
+static char *				/* O  - Filename or NULL */
+get_printer_ppd(
+    const char    *uri,			/* I  - Printer URI */
+    char          *buffer,		/* I  - Filename buffer */
+    size_t        bufsize,		/* I  - Size of filename buffer */
+    int           *num_options,		/* IO - Number of options */
+    cups_option_t **options)		/* IO - Options */
+ {
+   http_t	*http;			/* Connection to printer */
+   ipp_t		*request,		/* Get-Printer-Attributes request */
+ 		*response;		/* Get-Printer-Attributes response */
+  ipp_attribute_t *attr;		/* Attribute from response */
+   char		resolved[1024],		/* Resolved URI */
+ 		scheme[32],		/* URI scheme */
+ 		userpass[256],		/* Username:password */
+ 		host[256],		/* Hostname */
+ 		resource[256];		/* Resource path */
+   int		port;			/* Port number */
+  static const char * const pattrs[] =	/* Attributes to use */
+  {
+    "all",
+    "media-col-database"
+  };
+ 
+ 
+  /*
+@@ -1198,9 +1207,26 @@ get_printer_ppd(const char *uri,	/* I - Printer URI */
+ 
+   request = ippNewRequest(IPP_OP_GET_PRINTER_ATTRIBUTES);
+   ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", NULL, uri);
+  ippAddStrings(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes", sizeof(pattrs) / sizeof(pattrs[0]), NULL, pattrs);
+   response = cupsDoRequest(http, request, resource);
+ 
+-  if (!_ppdCreateFromIPP(buffer, bufsize, response))
+  if (cupsLastError() >= IPP_STATUS_REDIRECTION_OTHER_SITE)
+  {
+    _cupsLangPrintf(stderr, _("%s: Unable to query printer: %s"), "lpadmin", cupsLastErrorString());
+    buffer[0] = '\0';
+  }
+  else if (_ppdCreateFromIPP(buffer, bufsize, response))
+  {
+    if (!cupsGetOption("printer-geo-location", *num_options, *options) && (attr = ippFindAttribute(response, "printer-geo-location", IPP_TAG_URI)) != NULL)
+      *num_options = cupsAddOption("printer-geo-location", ippGetString(attr, 0, NULL), *num_options, options);
+
+    if (!cupsGetOption("printer-info", *num_options, *options) && (attr = ippFindAttribute(response, "printer-info", IPP_TAG_TEXT)) != NULL)
+      *num_options = cupsAddOption("printer-info", ippGetString(attr, 0, NULL), *num_options, options);
+
+    if (!cupsGetOption("printer-location", *num_options, *options) && (attr = ippFindAttribute(response, "printer-location", IPP_TAG_TEXT)) != NULL)
+      *num_options = cupsAddOption("printer-location", ippGetString(attr, 0, NULL), *num_options, options);
+  }
+  else
+     _cupsLangPrintf(stderr, _("%s: Unable to create PPD file: %s"), "lpadmin", strerror(errno));
+ 
+   ippDelete(response);
+diff --git a/templates/choose-model.tmpl b/templates/choose-model.tmpl
+index ee9338c..9c9b71f 100644
+--- a/templates/choose-model.tmpl
+++ b/templates/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Current Driver - {current_make_and_model}</OPTION>:}
+{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/de/choose-model.tmpl b/templates/de/choose-model.tmpl
+index cb9b6f3..c73ccb2 100644
+--- a/templates/de/choose-model.tmpl
+++ b/templates/de/choose-model.tmpl
+@@ -39,6 +39,7 @@ Drucker {?printer_is_shared=?nicht:{?printer_is_shared=0?nicht:}} im Netzwerk fr
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Aktueller Treiber - {current_make_and_model}</OPTION>:}
+{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/es/choose-model.tmpl b/templates/es/choose-model.tmpl
+index 8a5a4ba..b5624f2 100644
+--- a/templates/es/choose-model.tmpl
+++ b/templates/es/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Controlador actual - {current_make_and_model}</OPTION>:}
+{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/fr/choose-model.tmpl b/templates/fr/choose-model.tmpl
+index a4e771c..07cf93c 100644
+--- a/templates/fr/choose-model.tmpl
+++ b/templates/fr/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Pilote courant - {current_make_and_model}</OPTION>:}
+{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/ja/choose-model.tmpl b/templates/ja/choose-model.tmpl
+index daf1375..6a6e4e4 100644
+--- a/templates/ja/choose-model.tmpl
+++ b/templates/ja/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>現在のドライバー - {current_make_and_model}</OPTION>:}
+{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/pt_BR/choose-model.tmpl b/templates/pt_BR/choose-model.tmpl
+index 55d8bd8..0ed6a3c 100644
+--- a/templates/pt_BR/choose-model.tmpl
+++ b/templates/pt_BR/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Driver atual - {current_make_and_model}</OPTION>:}
+{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/ru/choose-model.tmpl b/templates/ru/choose-model.tmpl
+index 2f0d6d9..dedbd49 100644
+--- a/templates/ru/choose-model.tmpl
+++ b/templates/ru/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Текущий драйвер - {current_make_and_model}</OPTION>:}
+{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
--- a/SOURCES/cups-kerberos.patch
+++ b/SOURCES/cups-kerberos.patch
@ -0,0 +1,23 @@
+diff --git a/backend/ipp.c b/backend/ipp.c
+index f8bf7e1..8440d2f 100644
+--- a/backend/ipp.c
+++ b/backend/ipp.c
+@@ -422,8 +422,7 @@ main(int  argc,				/* I - Number of command-line args */
+   * that way.
+   */
+ 
+-  if (!getuid() && (value = getenv("AUTH_UID")) != NULL &&
+-      !getenv("AUTH_PASSWORD"))
+  if (!getuid() && (value = getenv("AUTH_UID")) != NULL)
+   {
+     uid_t	uid = (uid_t)atoi(value);
+ 					/* User ID */
+@@ -457,7 +456,7 @@ main(int  argc,				/* I - Number of command-line args */
+ 
+ #  else /* No XPC, just try to run as the user ID */
+     if (uid > 0)
+-      seteuid(uid);
+      setuid(uid);
+ #  endif /* HAVE_XPC */
+   }
+ #endif /* HAVE_GSSAPI */
--- a/SOURCES/cups-preservejob-leak.patch
+++ b/SOURCES/cups-preservejob-leak.patch
@ -0,0 +1,31 @@
+diff --git a/scheduler/colorman.c b/scheduler/colorman.c
+index 8af4e5c..9bfdb0c 100644
+--- a/scheduler/colorman.c
+++ b/scheduler/colorman.c
+@@ -1083,7 +1083,7 @@ colord_create_profile(
+ 
+   dbus_message_iter_get_basic(&args, &profile_path);
+   cupsdLogMessage(CUPSD_LOG_DEBUG, "Created profile \"%s\".", profile_path);
+-  cupsArrayAdd(profiles, strdup(profile_path));
+  cupsArrayAdd(profiles, profile_path);
+ 
+ out:
+ 
+diff --git a/scheduler/job.c b/scheduler/job.c
+index 0223bee..47d4c72 100644
+--- a/scheduler/job.c
+++ b/scheduler/job.c
+@@ -1496,11 +1496,11 @@ cupsdDeleteJob(cupsd_job_t       *job,	/* I - Job */
+     job->num_files = 0;
+   }
+ 
+  unload_job(job);
+
+   if (job->history)
+     free_job_history(job);
+ 
+-  unload_job(job);
+-
+   cupsArrayRemove(Jobs, job);
+   cupsArrayRemove(ActiveJobs, job);
+   cupsArrayRemove(PrintingJobs, job);
--- a/SOURCES/cups-retry-current-job-man.patch
+++ b/SOURCES/cups-retry-current-job-man.patch
@ -0,0 +1,52 @@
+diff --git a/doc/help/man-cupsd.conf.html b/doc/help/man-cupsd.conf.html
+index 9082348..8ab1ce8 100644
+--- a/doc/help/man-cupsd.conf.html
+++ b/doc/help/man-cupsd.conf.html
+@@ -90,7 +90,7 @@ The default value is "30".
+ <dd style="margin-left: 5.0em">Specifies that a failed print job should be aborted (discarded) unless otherwise specified for the printer.
+ <dt><b>ErrorPolicy retry-job</b>
+ <dd style="margin-left: 5.0em">Specifies that a failed print job should be retried at a later time unless otherwise specified for the printer.
+-<dt><b>ErrorPolicy retry-this-job</b>
+<dt><b>ErrorPolicy retry-current-job</b>
+ <dd style="margin-left: 5.0em">Specifies that a failed print job should be retried immediately unless otherwise specified for the printer.
+ <dt><b>ErrorPolicy stop-printer</b>
+ <dd style="margin-left: 5.0em">Specifies that a failed print job should stop the printer unless otherwise specified for the printer. The 'stop-printer' error policy is the default.
+diff --git a/man/cupsd.conf.man.in b/man/cupsd.conf.man.in
+index 53a028d..ba12b07 100644
+--- a/man/cupsd.conf.man.in
+++ b/man/cupsd.conf.man.in
+@@ -135,7 +135,7 @@ Specifies that a failed print job should be aborted (discarded) unless otherwise
+ \fBErrorPolicy retry-job\fR
+ Specifies that a failed print job should be retried at a later time unless otherwise specified for the printer.
+ .TP 5
+-\fBErrorPolicy retry-this-job\fR
+\fBErrorPolicy retry-current-job\fR
+ Specifies that a failed print job should be retried immediately unless otherwise specified for the printer.
+ .TP 5
+ \fBErrorPolicy stop-printer\fR
+diff --git a/man/cupsd.conf.man.in.privilege-escalation b/man/cupsd.conf.man.in.privilege-escalation
+index ab89e15..130ea8a 100644
+--- a/man/cupsd.conf.man.in.privilege-escalation
+++ b/man/cupsd.conf.man.in.privilege-escalation
+@@ -135,7 +135,7 @@ Specifies that a failed print job should be aborted (discarded) unless otherwise
+ \fBErrorPolicy retry-job\fR
+ Specifies that a failed print job should be retried at a later time unless otherwise specified for the printer.
+ .TP 5
+-\fBErrorPolicy retry-this-job\fR
+\fBErrorPolicy retry-current-job\fR
+ Specifies that a failed print job should be retried immediately unless otherwise specified for the printer.
+ .TP 5
+ \fBErrorPolicy stop-printer\fR
+diff --git a/man/cupsd.conf.man.in.remove-weak-ciphers b/man/cupsd.conf.man.in.remove-weak-ciphers
+index 5516780..35065ca 100644
+--- a/man/cupsd.conf.man.in.remove-weak-ciphers
+++ b/man/cupsd.conf.man.in.remove-weak-ciphers
+@@ -135,7 +135,7 @@ Specifies that a failed print job should be aborted (discarded) unless otherwise
+ \fBErrorPolicy retry-job\fR
+ Specifies that a failed print job should be retried at a later time unless otherwise specified for the printer.
+ .TP 5
+-\fBErrorPolicy retry-this-job\fR
+\fBErrorPolicy retry-current-job\fR
+ Specifies that a failed print job should be retried immediately unless otherwise specified for the printer.
+ .TP 5
+ \fBErrorPolicy stop-printer\fR
--- a/SOURCES/upgrade_get_document.py.in
+++ b/SOURCES/upgrade_get_document.py.in
@ -0,0 +1,171 @@
+@PYTHON_SHEBANG@
+
+"""
+Upgrade script to enable authentication for CUPS-Get-Document in
+default policy
+"""
+
+import os
+import sys
+from shutil import copy
+
+
+def get_cupsd_conf():
+    """
+    Get all lines from cupsd.conf
+    """
+    if not os.path.exists('/etc/cups/cupsd.conf'):
+        return None
+
+    lines = []
+    with open('/etc/cups/cupsd.conf', 'r') as conf:
+        lines = conf.readlines()
+
+    return lines
+
+
+def get_default_policy(lines):
+    """
+    Get the default policy lines
+
+    :param list lines: lines from cupsd.conf
+    """
+    default_policy = []
+    in_policy = False
+
+    for line in lines:
+        if not in_policy and not line.lstrip().startswith('<Policy default>'):
+            continue
+
+        default_policy.append(line)
+
+        if line.lstrip().startswith('</Policy>'):
+            return default_policy
+
+        in_policy = True
+
+    return default_policy
+
+
+def get_limit_with_document(lines):
+    """
+    Get <Limit> scope which defines CUPS-Get-Document operation
+
+    :param list lines: Lines containing the default policy
+    """
+    limit = []
+    in_limit = False
+
+    for line in lines:
+        if not in_limit and not line.lstrip().startswith('<Limit'):
+            continue
+
+        if (not in_limit and line.lstrip().startswith('<Limit') and
+            not 'CUPS-Get-Document' in line.lstrip().split('#')[0][1:-1]):
+            continue
+
+        limit.append(line)
+
+        if line.lstrip().startswith('</Limit>'):
+            return limit
+
+        in_limit = True
+
+    return limit
+
+
+def check_for_authtype(lines):
+    """
+    Check if <Limit> defining CUPS-Get-Document defines
+    any authentication
+
+    :param list lines: Lines of <Limit> scope which defines CUPS-Get-Document
+    """
+    for line in lines:
+        if line.lstrip().startswith('AuthType'):
+            return True
+    return False
+
+
+def migrate_cupsd_conf(lines):
+    """
+    Make changes to cupsd.conf contents to use authentication
+    for CUPS-Get-Document
+
+    :param list lines: Lines from cupsd.conf
+    """
+    new_lines = []
+    in_policy = False
+    create_document_limit = False
+
+    for line in lines:
+        if (in_policy and line.lstrip().startswith('<Limit') and
+            not line.lstrip().startswith('<Limit CUPS-Get-Document>') and
+            'CUPS-Get-Document' in line.lstrip().split('#')[0][1:-1]):
+            line = line.replace(' CUPS-Get-Document', '')
+            create_document_limit = True
+
+        if in_policy and line.lstrip().startswith('</Policy>') and create_document_limit:
+            new_lines.append('\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             '# added during upgrade\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             '<Limit CUPS-Get-Document>\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 4) * ' ' +
+                             'AuthType Default\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 4) * ' ' +
+                             'Require user @OWNER @SYSTEM\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 4) * ' ' +
+                             'Order deny,allow\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             '</Limit>\n')
+            create_document_limit = False
+
+        new_lines.append(line)
+
+        if not in_policy:
+            if line.lstrip().startswith('<Policy default>'):
+                in_policy = True
+            continue
+
+        if line.lstrip().startswith('<Limit CUPS-Get-Document>'):
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             '# added during upgrade\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             'AuthType Default\n')
+            continue
+
+        if line.lstrip().startswith('</Policy>'):
+            in_policy = False
+            continue
+
+    return new_lines
+
+
+def apply_changes(lines):
+    """
+    Backup the original file if there is no .rpmsave already and
+    apply changes to the actual cupsd.conf
+
+    :param list lines: New lines for cupsd.conf
+    """
+    if not os.path.exists('/etc/cups/cupsd.conf.rpmsave'):
+        copy('/etc/cups/cupsd.conf', '/etc/cups/cupsd.conf.rpmsave')
+
+    with open('/etc/cups/cupsd.conf', 'w') as conf:
+        conf.writelines(lines)
+
+
+
+content = get_cupsd_conf()
+if content is None:
+    sys.exit(1)
+
+if check_for_authtype(get_limit_with_document(get_default_policy(content))):
+    sys.exit(0)
+
+new_content = migrate_cupsd_conf(content)
+
+apply_changes(new_content)
+
+sys.exit(0)
--- a/SPECS/cups.spec
+++ b/SPECS/cups.spec
@ -7,6 +7,13 @@
 # but we use lib for compatibility with 3rd party drivers (at upstream request).
 %global cups_serverbin %{_exec_prefix}/lib/cups

+# we still need something for python2...
+%if 0%{?rhel} >= 8 || 0%{?fedora}
+%global __python %{__python3}
+%else
+%global __python /usr/bin/python2
+%endif
+
 #%%global prever rc1
 #%%global VERSION %%{version}%%{prever}
 %global VERSION %{version}
@ -15,7 +22,7 @@ Summary: CUPS printing system
 Name: cups
 Epoch: 1
 Version: 2.2.6
-Release: 41%{?dist}
+Release: 57%{?dist}
 License: GPLv2+ and LGPLv2 with exceptions and AML
 Url: http://www.cups.org/
 Source0: https://github.com/apple/cups/releases/download/v%{VERSION}/cups-%{VERSION}-source.tar.gz
@ -26,6 +33,8 @@ Source6: cups.logrotate
 # Backend for NCP protocol
 Source7: ncp.backend
 Source8: macros.cups
+# CVE-2023-32360 migration script
+Source9: upgrade_get_document.py.in

 Patch1: cups-no-gzip-man.patch
 Patch2: cups-system-auth.patch
@ -123,8 +132,46 @@ Patch67: 0001-scheduler-job.c-use-gziptoany-for-raw-files-not-just.patch
 Patch68: cups-restart-job-hold-until.patch
 # 1811716 - lpr to non-existent printer reports incorrect error
 Patch69: 0001-cups-dests.c-cupsGetNamedDest-set-IPP_STATUS_ERROR_N.patch
+# 2015182 - RFE: Implement IdleExitTimeout configuration during build
+Patch70: 0001-Add-with-idle-exit-timeout-configure-option.patch
+# 2013865 - RFE: Implement TimeoutStartSec configuration during build
+Patch71: 0001-Add-with-systemd-timeoutstartsec-configure-option.patch
+# 2032965 - [RFE] RHEL8 - CUPS Web UI supports adding IPP Everywhere
+Patch72: cups-ippeve-web-support.patch
+# 2071417 - 30-second delays printing to Windows 2016 server via HTTPS
+Patch73: 0001-cups-tls-gnutls.c-Use-always-GNUTLS_SHUT_WR.patch
+# 2074684 - lp to a remote server takes a long time
+Patch74: 0001-Use-cupsGetNamedDest-for-legacy-printing-APIs-Issue-.patch
+# 2074736 - CUPS is too chatty about "Removing document files." in debug mode
+Patch75: cups-cupsd-too-chatty.patch
+# CVE-2022-26691 cups: authorization bypass when using "local" authorization
+Patch76: 0001-scheduler-cert.c-Fix-string-comparison-fixes-CVE-202.patch
+# 2084257 - ErrorPolicy documentation is incorrect
+Patch77: cups-retry-current-job-man.patch
+# 1910415 - manpage update to acknowledge order dependency of -h option
+Patch78: 0001-Update-man-pages-for-h-option-Issue-357.patch
+# 2130391 - Kerberized IPP Printing Fails
+Patch79: cups-kerberos.patch
+# 2217178 - Delays printing to lpd when reserved ports are exhausted
+Patch80: 0001-Fix-delays-printing-to-lpd-when-reserved-ports-are-e.patch
+# 2217283 - The command "cancel -x <job>" does not remove job files
+Patch81: 0001-Use-purge-job-instead-of-purge-jobs-when-canceling-a.patch
+# 2217955 - Enlarge backlog queue for listen() in cupsd
+Patch82: 0001-cups-http-addr.c-Set-listen-backlog-size-to-INT_MAX-.patch
+# CVE-2023-34241 cups: use-after-free in cupsdAcceptClient() in scheduler/client.c
+Patch83: 0001-Log-result-of-httpGetHostname-BEFORE-closing-the-con.patch
+# CVE-2023-32324 cups: heap buffer overflow may lead to DoS
+Patch84: 0001-cups-strlcpy-handle-zero-size.patch
+# CVE-2023-32360 cups:  Information leak through Cups-Get-Document operation
+Patch85: 0001-Require-authentication-for-CUPS-Get-Document.patch
+# RHEL-14933 cupsd memory leak in cupsdDeleteJob() with "PreserveJobHistory Off"
+Patch86: cups-preservejob-leak.patch
+# RHEL-15309 cupsd fails to open cups-files.conf and the resulting error message is lost
+Patch87: 0001-scheduler-conf.c-Print-to-stderr-if-we-don-t-open-cu.patch
+# RHEL-10702 cupsGetJobs fails to connect if poll() gets POLLOUT|POLLHUP in revents
+Patch88: 0001-httpAddrConnect2-Check-for-error-if-POLLHUP-is-in-va.patch

-Patch100: cups-lspp.patch
+Patch1000: cups-lspp.patch

 Requires: %{name}-filesystem = %{epoch}:%{version}-%{release}
 Requires: %{name}-libs%{?_isa} = %{epoch}:%{version}-%{release}
@ -169,6 +216,9 @@ Requires(post): grep, sed
 Requires(preun): systemd
 Requires(postun): systemd

+# for upgrade-get-document script
+Requires(post): %{__python}
+
 # We ship udev rules which use setfacl.
 Requires: systemd
 Requires: acl
@ -323,7 +373,7 @@ Sends IPP requests to the specified URI and tests and/or displays the results.

 %if %{lspp}
 # LSPP support.
-%patch100 -p1 -b .lspp
+%patch1000 -p1 -b .lspp
 %endif

 # substitute default values for invalid job attributes (upstream #5186 and #5229)
@ -389,6 +439,44 @@ Sends IPP requests to the specified URI and tests and/or displays the results.
 %patch68 -p1 -b .restart-hold-job
 # 1811716 - lpr to non-existent printer reports incorrect error
 %patch69 -p1 -b .lplpr-better-error
+# 2015182 - RFE: Implement IdleExitTimeout configuration during build
+%patch70 -p1 -b .idleexittimeout
+# 2013865 - RFE: Implement TimeoutStartSec configuration during build
+%patch71 -p1 -b .timeoutstartsec
+# 2032965 - [RFE] RHEL8 - CUPS Web UI supports adding IPP Everywhere
+%patch72 -p1 -b .ippeve-web-support
+# 2071417 - 30-second delays printing to Windows 2016 server via HTTPS
+%patch73 -p1 -b .gnutlsbye
+# 2074684 - lp to a remote server takes a long time
+%patch74 -p1 -b .lp-long-time
+# 2074736 - CUPS is too chatty about "Removing document files." in debug mode
+%patch75 -p1 -b .cupsd-too-chatty
+# CVE-2022-26691 cups: authorization bypass when using "local" authorization
+%patch76 -p1 -b .cve26691
+# 2084257 - ErrorPolicy documentation is incorrect
+%patch77 -p1 -b .retry-current-job-man
+# 1910415 - manpage update to acknowledge order dependency of -h option
+%patch78 -p1 -b .manpage-update
+# 2130391 - Kerberized IPP Printing Fails
+%patch79 -p1 -b .kerberos
+# 2217178 - Delays printing to lpd when reserved ports are exhausted
+%patch80 -p1 -b .lpd-delay
+# 2217283 - The command "cancel -x <job>" does not remove job files
+%patch81 -p1 -b .purge-job
+# 2217955 - Enlarge backlog queue for listen() in cupsd
+%patch82 -p1 -b .listen-backlog
+# CVE-2023-34241 cups: use-after-free in cupsdAcceptClient() in scheduler/client.c
+%patch83 -p1 -b .cve34241
+# CVE-2023-32324 cups: heap buffer overflow may lead to DoS
+%patch84 -p1 -b .cve32324
+# CVE-2023-32360 cups: Information leak through Cups-Get-Document operation
+%patch85 -p1 -b .get-document-auth
+# RHEL-14933 cupsd memory leak in cupsdDeleteJob() with "PreserveJobHistory Off"
+%patch86 -p1 -b .preservejob-leak
+# RHEL-15309 cupsd fails to open cups-files.conf and the resulting error message is lost
+%patch87 -p1 -b .message-stderr
+# RHEL-10702 cupsGetJobs fails to connect if poll() gets POLLOUT|POLLHUP in revents
+%patch88 -p1 -b .cupsgetjobs-pollhup

 sed -i -e '1iMaxLogSize 0' conf/cupsd.conf.in

@ -438,6 +526,10 @@ export CXX=g++
 	--with-xinetd=no \
 	--with-access-log-level=actions \
 	--enable-page-logging \
+%if 0%{?rhel}
+  --without-idle-exit-timeout \
+  --without-systemd-timeoutstartsec \
+%endif
 	localedir=%{_datadir}/locale

 # If we got this far, all prerequisite libraries must be here.
@ -534,6 +626,11 @@ s:.*\('%{_datadir}'/\)\([^/_]\+\)\(.*\.po$\):%lang(\2) \1\2\3:
 /^\([^%].*\)/d
 ' > %{name}.lang

+# install get-document upgrade script
+install -m 0755 %{SOURCE9} %{buildroot}%{_sbindir}/upgrade_get_document
+
+sed -i 's,@PYTHON_SHEBANG@,#!%{__python},' %{buildroot}%{_sbindir}/upgrade_get_document
+
 %post
 %systemd_post %{name}.path %{name}.socket %{name}.service

@ -591,6 +688,13 @@ then
  %{_bindir}/systemctl enable cups.service > /dev/null 2>&1
 fi

+# 2013865 - if the directive is not in cupsd.conf, add it (needed during upgrades if
+# user had changed the config file)
+grep '^\s*IdleExitTimeout' %{_sysconfdir}/cups/cupsd.conf &> /dev/null || echo -e '\nIdleExitTimeout 0' \
+>> %{_sysconfdir}/cups/cupsd.conf
+
+%{_sbindir}/upgrade_get_document
+
 exit 0

 %post client
@ -799,6 +903,67 @@ rm -f %{cups_serverbin}/backend/smb
 %{_mandir}/man5/ipptoolfile.5.gz

 %changelog
+* Mon Feb 26 2024 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-57
+- revert RHEL-19200 - no new subpackages are needed
+
+* Wed Dec 20 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-56
+- RHEL-10702 cupsGetJobs fails to connect if poll() gets POLLOUT|POLLHUP in revents
+- RHEL-19200 Recommend new cups-filters subpackages with weak dep for better upgrade exp
+
+* Fri Nov 03 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-55
+- RHEL-14933 cupsd memory leak in cupsdDeleteJob() with "PreserveJobHistory Off"
+- RHEL-15309 cupsd fails to open cups-files.conf and the resulting error message is lost
+
+* Tue Sep 12 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-54
+- RHEL-2612 - cups pulls an unneeded dependency on python3
+
+* Tue Aug 29 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-53
+- CVE-2023-32360 cups: Information leak through Cups-Get-Document operation
+
+* Thu Jun 29 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-52
+- 2217178 - Delays printing to lpd when reserved ports are exhausted
+- 2217283 - The command "cancel -x <job>" does not remove job files
+- 2217955 - Enlarge backlog queue for listen() in cupsd
+- CVE-2023-34241 cups: use-after-free in cupsdAcceptClient() in scheduler/client.c
+- CVE-2023-32324 cups: heap buffer overflow may lead to DoS
+
+* Mon Apr 03 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-51
+- RHEL-316 - Enable fmf tests in centos stream
+
+* Wed Dec 14 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-51
+- 2130391 - Kerberized IPP Printing Fails
+
+* Fri Jul 01 2022 Richard Lescak <rlescak@redhat.com> - 1:2.2.6-50
+- 1910415 - corrected manpage patch, one lpoptions usage wasn't changed
+
+* Thu Jun 16 2022 Richard Lescak <rlescak@redhat.com> - 1:2.2.6-49
+- 1910415 - manpage update to acknowledge order dependency of -h option
+
+* Tue May 31 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-48
+- 2084257 - ErrorPolicy documentation is incorrect
+
+* Thu May 26 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-47
+- CVE-2022-26691 cups: authorization bypass when using "local" authorization
+
+* Fri May 13 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-46
+- 2074684 - lp to a remote server takes a long time
+- 2074736 - CUPS is too chatty about "Removing document files." in debug mode
+
+* Fri Apr 08 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-45
+- 2071417 - 30-second delays printing to Windows 2016 server via HTTPS
+
+* Wed Jan 19 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-44
+- 2015182 - RFE: Implement IdleExitTimeout configuration during build
+
+* Thu Jan 06 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-43
+- 2032965 - [RFE] RHEL8 - CUPS Web UI supports adding IPP Everywhere
+
+* Thu Dec 16 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-42
+- 2013865 - RFE: Implement TimeoutStartSec configuration during build
+
+* Mon Nov 29 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-42
+- 2015182 - RFE: Implement IdleExitTimeout configuration during build
+
 * Wed Nov 03 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-41
 - 2006987 - Unauthenticated users can't move print jobs in Web UI
 - 2017919 - Setting 'MaxJobTime 0' does not set a job time to unlimited