import UBI cups-2.2.6-60.el8_10

SOURCES/0001-Add-with-idle-exit-timeout-configure-option.patch

@@ -0,0 +1,33 @@
+diff -up cups-2.2.6/conf/cupsd.conf.in.idleexittimeout cups-2.2.6/conf/cupsd.conf.in
+--- cups-2.2.6/conf/cupsd.conf.in.idleexittimeout	2017-11-01 15:57:53.000000000 +0100
++++ cups-2.2.6/conf/cupsd.conf.in	2021-11-29 11:45:37.416058954 +0100
+@@ -22,6 +22,9 @@ DefaultAuthType Basic
+ # Web interface setting...
+ WebInterface @CUPS_WEBIF@
+ 
++# Timeout after cupsd exits if idle (applied only if cupsd runs on-demand - with -l)
++IdleExitTimeout @EXIT_TIMEOUT@
++
+ # Restrict access to the server...
+ <Location />
+   Order allow,deny
+diff -up cups-2.2.6/config-scripts/cups-defaults.m4.idleexittimeout cups-2.2.6/config-scripts/cups-defaults.m4
+--- cups-2.2.6/config-scripts/cups-defaults.m4.idleexittimeout	2021-11-29 11:45:37.416058954 +0100
++++ cups-2.2.6/config-scripts/cups-defaults.m4	2021-11-29 11:46:31.680612421 +0100
+@@ -425,3 +425,16 @@ esac
+ 
+ AC_SUBST(CUPS_WEBIF)
+ AC_DEFINE_UNQUOTED(CUPS_DEFAULT_WEBIF, $CUPS_DEFAULT_WEBIF)
++
++dnl Set default value of IdleExitTimeout
++AC_ARG_WITH([idle_exit_timeout], AS_HELP_STRING([--with-idle-exit-timeout], [set the default value for IdleExitTimeout, default=60]), [
++    AS_IF([test "x$withval" = "xno"], [
++	EXIT_TIMEOUT=0
++    ], [
++	EXIT_TIMEOUT=$withval
++    ])
++], [
++    EXIT_TIMEOUT=60
++])
++
++AC_SUBST([EXIT_TIMEOUT])

SOURCES/0001-Add-with-systemd-timeoutstartsec-configure-option.patch

@@ -0,0 +1,33 @@
+diff -up cups-2.3.3op2/config-scripts/cups-defaults.m4.conf-timeoutstartsec cups-2.3.3op2/config-scripts/cups-defaults.m4
+--- cups-2.3.3op2/config-scripts/cups-defaults.m4.conf-timeoutstartsec	2021-11-29 13:50:14.568976028 +0100
++++ cups-2.3.3op2/config-scripts/cups-defaults.m4	2021-11-29 13:51:02.785567762 +0100
+@@ -482,3 +482,18 @@ AC_ARG_WITH([idle_exit_timeout], AS_HELP
+ ])
+ 
+ AC_SUBST([EXIT_TIMEOUT])
++
++dnl set TimeoutStartSec for cups.service
++dnl - if used as --without-*, it sets TimeoutStartSec to infinity
++AC_ARG_WITH([systemd-timeoutstartsec],
++    AS_HELP_STRING([--with-systemd-timeoutstartsec],
++	[set TimeoutStartSec value in cups.service, default=default value in systemd]), [
++    AS_IF([ test "x$withval" = "xno" ], [
++	TIMEOUTSTARTSEC="TimeoutStartSec=infinity"
++    ], [
++	TIMEOUTSTARTSEC="TimeoutStartSec=$withval"
++    ])
++], [
++    TIMEOUTSTARTSEC=""
++])
++AC_SUBST([TIMEOUTSTARTSEC])
+diff -up cups-2.3.3op2/scheduler/org.cups.cupsd.service.in.conf-timeoutstartsec cups-2.3.3op2/scheduler/org.cups.cupsd.service.in
+--- cups-2.3.3op2/scheduler/org.cups.cupsd.service.in.conf-timeoutstartsec	2021-11-29 13:50:14.551976172 +0100
++++ cups-2.3.3op2/scheduler/org.cups.cupsd.service.in	2021-11-29 13:50:14.568976028 +0100
+@@ -8,6 +8,7 @@ Requires=cups.socket
+ ExecStart=@sbindir@/cupsd -l
+ Type=notify
+ Restart=on-failure
++@TIMEOUTSTARTSEC@
+ 
+ [Install]
+ Also=cups.socket cups.path

SOURCES/0001-Fix-delays-printing-to-lpd-when-reserved-ports-are-e.patch

@@ -0,0 +1,21 @@
+diff -up cups-2.3.3op2/backend/lpd.c.lpd-delay cups-2.3.3op2/backend/lpd.c
+--- cups-2.3.3op2/backend/lpd.c.lpd-delay	2021-02-01 22:10:25.000000000 +0100
++++ cups-2.3.3op2/backend/lpd.c	2023-06-28 17:28:52.465476261 +0200
+@@ -63,7 +63,7 @@ static int	abort_job = 0;		/* Non-zero i
+ 
+ #define RESERVE_NONE		0	/* Don't reserve a priviledged port */
+ #define RESERVE_RFC1179		1	/* Reserve port 721-731 */
+-#define RESERVE_ANY		2	/* Reserve port 1-1023 */
++#define RESERVE_ANY		2	/* Reserve port 512-1023 */
+ 
+ 
+ /*
+@@ -778,7 +778,7 @@ lpd_queue(const char      *hostname,	/*
+ 
+       if (lport < 721 && reserve == RESERVE_RFC1179)
+ 	lport = 731;
+-      else if (lport < 1)
++      else if (lport < 512)
+ 	lport = 1023;
+ 
+ #ifdef HAVE_GETEUID

SOURCES/0001-Fix-domain-socket-handling.patch

@@ -0,0 +1,86 @@
+diff --git a/cups/http-addr.c b/cups/http-addr.c
+index 61c86384b..e86dcb622 100644
+--- a/cups/http-addr.c
++++ b/cups/http-addr.c
+@@ -198,31 +198,29 @@ httpAddrListen(http_addr_t *addr,	/* I - Address to bind to */
+   {
+     mode_t	mask;			/* Umask setting */
+ 
+-   /*
+-    * Remove any existing domain socket file...
+-    */
+-
+-    unlink(addr->un.sun_path);
+-
+-   /*
+-    * Save the current umask and set it to 0 so that all users can access
+-    * the domain socket...
+-    */
+-
+-    mask = umask(0);
+-
+-   /*
+-    * Bind the domain socket...
+-    */
++    // Remove any existing domain socket file...
++    if ((status = unlink(addr->un.sun_path)) < 0)
++    {
++      DEBUG_printf(("1httpAddrListen: Unable to unlink \"%s\": %s", addr->un.sun_path, strerror(errno)));
++      if (errno == ENOENT)
++       status = 0;
++    }
+ 
+-    status = bind(fd, (struct sockaddr *)addr, (socklen_t)httpAddrLength(addr));
++    if (!status)
++    {
++      // Save the current umask and set it to 0 so that all users can access
++      // the domain socket...
++      mask = umask(0);
+ 
+-   /*
+-    * Restore the umask and fix permissions...
+-    */
++      // Bind the domain socket...
++      if ((status = bind(fd, (struct sockaddr *)addr, (socklen_t)httpAddrLength(addr))) < 0)
++      {
++        DEBUG_printf(("1httpAddrListen: Unable to bind domain socket \"%s\": %s", addr->un.sun_path, strerror(errno)));
++      }
+ 
+-    umask(mask);
+-    chmod(addr->un.sun_path, 0140777);
++      // Restore the umask...
++      umask(mask);
++    }
+   }
+   else
+ #endif /* AF_LOCAL */
+diff --git a/scheduler/conf.c b/scheduler/conf.c
+index bc52d2add..93de8cf77 100644
+--- a/scheduler/conf.c
++++ b/scheduler/conf.c
+@@ -3055,6 +3055,25 @@ read_cupsd_conf(cups_file_t *fp)	/* I - File to read from */
+ 
+       cupsd_listener_t	*lis;		/* New listeners array */
+ 
++     /*
++      * If we are launched on-demand, do not use domain sockets from the config
++      * file.  Also check that the domain socket path is not too long...
++      */
++
++#ifdef HAVE_ONDEMAND
++      if (*value == '/' && OnDemand)
++      {
++        if (strcmp(value, CUPS_DEFAULT_DOMAINSOCKET))
++          cupsdLogMessage(CUPSD_LOG_INFO, "Ignoring %s address %s at line %d - only using domain socket from launchd/systemd.", line, value, linenum);
++        continue;
++      }
++#endif // HAVE_ONDEMAND
++
++      if (*value == '/' && strlen(value) > (sizeof(addr->addr.un.sun_path) - 1))
++      {
++        cupsdLogMessage(CUPSD_LOG_INFO, "Ignoring %s address %s at line %d - too long.", line, value, linenum);
++        continue;
++      }
+ 
+      /*
+       * Get the address list...

SOURCES/0001-Fix-handling-of-MaxJobTime-0-Issue-5438.patch

@@ -0,0 +1,43 @@
+From 3e4dd41459dabc5d18edbe06eb5b81291885204b Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Wed, 5 Dec 2018 12:18:19 -0500
+Subject: [PATCH] Fix handling of MaxJobTime 0 (Issue #5438)
+
+---
+ CHANGES.md           | 5 +++--
+ scheduler/job.c      | 4 +++-
+ scheduler/printers.c | 2 +-
+ 3 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/scheduler/job.c b/scheduler/job.c
+index 3cbe56aa8..638f256db 100644
+--- a/scheduler/job.c
++++ b/scheduler/job.c
+@@ -5148,8 +5148,10 @@ update_job(cupsd_job_t *job)		/* I - Job to check */
+ 
+             if (cancel_after)
+ 	      job->cancel_time = time(NULL) + ippGetInteger(cancel_after, 0);
+-	    else
++	    else if (MaxJobTime > 0)
+ 	      job->cancel_time = time(NULL) + MaxJobTime;
++	    else
++	      job->cancel_time = 0;
+ 	  }
+         }
+       }
+diff --git a/scheduler/printers.c b/scheduler/printers.c
+index bb99907ad..68239d85d 100644
+--- a/scheduler/printers.c
++++ b/scheduler/printers.c
+@@ -3370,7 +3370,7 @@ add_printer_defaults(cupsd_printer_t *p)/* I - Printer */
+         	 "document-format-default", NULL, "application/octet-stream");
+ 
+   if (!cupsGetOption("job-cancel-after", p->num_options, p->options))
+-    ippAddInteger(p->attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
++    ippAddInteger(p->attrs, IPP_TAG_PRINTER, MaxJobTime > 0 ? IPP_TAG_INTEGER : IPP_TAG_NOVALUE,
+ 		  "job-cancel-after-default", MaxJobTime);
+ 
+   if (!cupsGetOption("job-hold-until", p->num_options, p->options))
+-- 
+2.31.1
+

SOURCES/0001-Fix-lpadmin-with-cupsIPPSupplies-and-cupsSNMPSupplie.patch

@@ -0,0 +1,62 @@
+From 9539c53065170e97836503074e770d7b5fbf9f83 Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Tue, 16 Jul 2019 09:27:13 -0400
+Subject: [PATCH] Fix lpadmin with cupsIPPSupplies and cupsSNMPSupplies (Issue
+ #5610)
+
+---
+ CHANGES.md        | 2 ++
+ systemv/lpadmin.c | 9 +++++++--
+ 2 files changed, 9 insertions(+), 2 deletions(-)
+
+diff --git a/systemv/lpadmin.c b/systemv/lpadmin.c
+index f428368d4..ca6d386b2 100644
+--- a/systemv/lpadmin.c
++++ b/systemv/lpadmin.c
+@@ -1467,6 +1467,7 @@ set_printer_options(
+ 	  (boolval = cupsGetOption("cupsIPPSupplies", num_options,
+ 	                           options)) != NULL)
+       {
++        ppdchanged         = 1;
+         wrote_ipp_supplies = 1;
+         cupsFilePrintf(out, "*cupsIPPSupplies: %s\n",
+ 	               (!_cups_strcasecmp(boolval, "true") ||
+@@ -1477,6 +1478,7 @@ set_printer_options(
+ 	       (boolval = cupsGetOption("cupsSNMPSupplies", num_options,
+ 	                                options)) != NULL)
+       {
++        ppdchanged          = 1;
+         wrote_snmp_supplies = 1;
+         cupsFilePrintf(out, "*cupsSNMPSupplies: %s\n",
+ 	               (!_cups_strcasecmp(boolval, "true") ||
+@@ -1537,6 +1539,8 @@ set_printer_options(
+ 	(boolval = cupsGetOption("cupsIPPSupplies", num_options,
+ 				 options)) != NULL)
+     {
++      ppdchanged = 1;
++
+       cupsFilePrintf(out, "*cupsIPPSupplies: %s\n",
+ 		     (!_cups_strcasecmp(boolval, "true") ||
+ 		      !_cups_strcasecmp(boolval, "yes") ||
+@@ -1547,6 +1551,8 @@ set_printer_options(
+         (boolval = cupsGetOption("cupsSNMPSupplies", num_options,
+ 			         options)) != NULL)
+     {
++      ppdchanged = 1;
++
+       cupsFilePrintf(out, "*cupsSNMPSupplies: %s\n",
+ 		     (!_cups_strcasecmp(boolval, "true") ||
+ 		      !_cups_strcasecmp(boolval, "yes") ||
+@@ -1561,8 +1567,7 @@ set_printer_options(
+     * Do the request...
+     */
+ 
+-    ippDelete(cupsDoFileRequest(http, request, "/admin/",
+-                                ppdchanged ? tempfile : file));
++    ippDelete(cupsDoFileRequest(http, request, "/admin/", ppdchanged ? tempfile : file));
+ 
+    /*
+     * Clean up temp files... (TODO: catch signals in case we CTRL-C during
+-- 
+2.31.1
+

SOURCES/0001-Log-result-of-httpGetHostname-BEFORE-closing-the-con.patch

@@ -0,0 +1,64 @@
+From ffd290b4ab247f82722927ba9b21358daa16dbf1 Mon Sep 17 00:00:00 2001
+From: Rose <83477269+AtariDreams@users.noreply.github.com>
+Date: Thu, 1 Jun 2023 11:33:39 -0400
+Subject: [PATCH] Log result of httpGetHostname BEFORE closing the connection
+
+httpClose frees the memory of con->http. This is problematic because httpGetHostname then tries to access the memory it points to.
+
+We have to log the hostname first.
+---
+ scheduler/client.c | 16 +++++++---------
+ 1 file changed, 7 insertions(+), 9 deletions(-)
+
+diff --git a/scheduler/client.c b/scheduler/client.c
+index 91e441188..327473a4d 100644
+--- a/scheduler/client.c
++++ b/scheduler/client.c
+@@ -193,13 +193,11 @@ cupsdAcceptClient(cupsd_listener_t *lis)/* I - Listener socket */
+    /*
+     * Can't have an unresolved IP address with double-lookups enabled...
+     */
+-
+-    httpClose(con->http);
+-
+     cupsdLogClient(con, CUPSD_LOG_WARN,
+-                    "Name lookup failed - connection from %s closed!",
++                    "Name lookup failed - closing connection from %s!",
+                     httpGetHostname(con->http, NULL, 0));
+ 
++    httpClose(con->http);
+     free(con);
+     return;
+   }
+@@ -235,11 +233,11 @@ cupsdAcceptClient(cupsd_listener_t *lis)/* I - Listener socket */
+       * with double-lookups enabled...
+       */
+ 
+-      httpClose(con->http);
+-
+       cupsdLogClient(con, CUPSD_LOG_WARN,
+-                      "IP lookup failed - connection from %s closed!",
++                      "IP lookup failed - closing connection from %s!",
+                       httpGetHostname(con->http, NULL, 0));
++
++      httpClose(con->http);
+       free(con);
+       return;
+     }
+@@ -256,11 +254,11 @@ cupsdAcceptClient(cupsd_listener_t *lis)/* I - Listener socket */
+ 
+   if (!hosts_access(&wrap_req))
+   {
+-    httpClose(con->http);
+-
+     cupsdLogClient(con, CUPSD_LOG_WARN,
+                     "Connection from %s refused by /etc/hosts.allow and "
+ 		    "/etc/hosts.deny rules.", httpGetHostname(con->http, NULL, 0));
++
++    httpClose(con->http);
+     free(con);
+     return;
+   }
+-- 
+2.41.0
+

SOURCES/0001-Require-authentication-for-CUPS-Get-Document.patch

@@ -0,0 +1,31 @@
+From a0c8b9c9556882f00c68b9727a95a1b6d1452913 Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Tue, 6 Dec 2022 09:04:01 -0500
+Subject: [PATCH] Require authentication for CUPS-Get-Document.
+
+---
+ conf/cupsd.conf.in | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/conf/cupsd.conf.in b/conf/cupsd.conf.in
+index b25884907..a07536f3e 100644
+--- a/conf/cupsd.conf.in
++++ b/conf/cupsd.conf.in
+@@ -68,7 +68,13 @@ IdleExitTimeout @EXIT_TIMEOUT@
+     Order deny,allow
+   </Limit>
+ 
+-  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
++  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job>
++    Require user @OWNER @SYSTEM
++    Order deny,allow
++  </Limit>
++
++  <Limit CUPS-Get-Document>
++    AuthType Default
+     Require user @OWNER @SYSTEM
+     Order deny,allow
+   </Limit>
+-- 
+2.41.0
+

SOURCES/0001-Update-man-pages-for-h-option-Issue-357.patch

@@ -0,0 +1,899 @@
+From 4d6787bd98c2fac8dcc58f34125d299d82e622aa Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Mon, 2 May 2022 15:35:20 -0400
+Subject: [PATCH] Update man pages for -h option (Issue #357)
+
+---
+ CHANGES.md                  |  1 +
+ doc/help/man-cancel.html    |  7 ++++---
+ doc/help/man-cupsctl.html   |  7 ++++---
+ doc/help/man-ipptool.html   |  6 ++++++
+ doc/help/man-lp.html        |  9 +++++----
+ doc/help/man-lpinfo.html    |  9 +++++----
+ doc/help/man-lpmove.html    |  9 +++++----
+ doc/help/man-lpoptions.html | 17 +++++++++--------
+ doc/help/man-lpq.html       |  5 +++--
+ doc/help/man-lpr.html       |  5 +++--
+ doc/help/man-lprm.html      |  6 +++---
+ doc/help/man-lpstat.html    |  5 +++--
+ man/cancel.1                |  9 +++++----
+ man/cupsctl.8               |  9 +++++----
+ man/lp.1                    | 11 ++++++-----
+ man/lpinfo.8                | 11 ++++++-----
+ man/lpmove.8                | 11 ++++++-----
+ man/lpoptions.1             | 19 ++++++++++---------
+ man/lpq.1                   |  7 ++++---
+ man/lpr.1                   |  7 ++++---
+ man/lprm.1                  |  8 ++++----
+ man/lpstat.1                | 11 ++++++-----
+ 22 files changed, 107 insertions(+), 82 deletions(-)
+
+diff --git a/doc/help/man-cancel.html b/doc/help/man-cancel.html
+index d51bb2b91..a0b52369c 100644
+--- a/doc/help/man-cancel.html
++++ b/doc/help/man-cancel.html
+@@ -12,6 +12,9 @@ cancel - cancel jobs
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>cancel</b>
+ [
++<b>-h</b>
++<i>hostname[:port]</i>
++] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+@@ -19,9 +22,6 @@ cancel - cancel jobs
+ ] [
+ <b>-a</b>
+ ] [
+-<b>-h</b>
+-<i>hostname[:port]</i>
+-] [
+ <b>-u</b>
+ <i>username</i>
+ ] [
+@@ -46,6 +46,7 @@ destinations if none is provided.
+ <dd style="margin-left: 5.0em">Forces encryption when connecting to the server.
+ <dt><b>-h </b><i>hostname</i>[<i>:port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
++Note: This option must occur before all others.
+ <dt><b>-U </b><i>username</i>
+ <dd style="margin-left: 5.0em">Specifies the username to use when connecting to the server.
+ <dt><b>-u </b><i>username</i>
+diff --git a/doc/help/man-cupsctl.html b/doc/help/man-cupsctl.html
+index b3f892ef9..e5c98dccb 100644
+--- a/doc/help/man-cupsctl.html
++++ b/doc/help/man-cupsctl.html
+@@ -12,14 +12,14 @@ cupsctl - configure cupsd.conf options
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>cupsctl</b>
+ [
++<b>-h</b>
++<i>server</i>[<b>:</b><i>port</i>]
++] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+ <i>username</i>
+ ] [
+-<b>-h</b>
+-<i>server</i>[<b>:</b><i>port</i>]
+-] [
+ <b>--</b>[<b>no-</b>]<b>debug-logging</b>
+ ] [
+ <b>--</b>[<b>no-</b>]<b>remote-admin</b>
+@@ -45,6 +45,7 @@ The following options are recognized:
+ <dd style="margin-left: 5.0em">Specifies an alternate username to use when authenticating with the scheduler.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies the server address.
++Note: This option must occur before all others.
+ <dt><b>--</b>[<b>no-</b>]<b>debug-logging</b>
+ <dd style="margin-left: 5.0em">Enables (disables) debug logging to the <i>error_log</i> file.
+ <dt><b>--</b>[<b>no-</b>]<b>remote-admin</b>
+diff --git a/doc/help/man-ipptool.html b/doc/help/man-ipptool.html
+index 81f67d77f..688454c69 100644
+--- a/doc/help/man-ipptool.html
++++ b/doc/help/man-ipptool.html
+@@ -59,6 +59,8 @@ ipptool - perform internet printing protocol requests
+ <b>-i</b>
+ <i>seconds</i>
+ ] [
++<b>-j</b>
++] [
+ <b>-n</b>
+ <i>repeat-count</i>
+ ] [
+@@ -150,6 +152,10 @@ This option is incompatible with the <b>-i</b> (interval) and <b>-n</b> (repeat-
+ <i>testfile</i>
+ should be repeated at the specified interval.
+ This option is incompatible with the <b>-X</b> (XML plist output) option.
++<dt><b>-j</b>
++<dd style="margin-left: 5.0em">Specifies that
++<b>ipptool</b>
++will produce JSON output.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Specifies that plain text output is desired.
+ <dt><b>-n</b><i> repeat-count</i>
+diff --git a/doc/help/man-lp.html b/doc/help/man-lp.html
+index f70c088d3..6442e900d 100644
+--- a/doc/help/man-lp.html
++++ b/doc/help/man-lp.html
+@@ -12,6 +12,8 @@ lp - print files
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lp</b>
+ [
++<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
++] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+@@ -21,8 +23,6 @@ lp - print files
+ ] [
+ <b>-d </b><i>destination</i>[<b>/</b><i>instance</i>]
+ ] [
+-<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+-] [
+ <b>-m</b>
+ ] [
+ <b>-n</b>
+@@ -51,6 +51,8 @@ lp - print files
+ <br>
+ <b>lp</b>
+ [
++<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
++] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+@@ -58,8 +60,6 @@ lp - print files
+ ] [
+ <b>-c</b>
+ ] [
+-<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+-] [
+ <b>-i</b>
+ <i>job-id</i>
+ ] [
+@@ -106,6 +106,7 @@ In CUPS, print files are always sent to the scheduler via IPP which has the same
+ <dd style="margin-left: 5.0em">Prints files to the named printer.
+ <dt><b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Chooses an alternate server.
++Note: This option must occur before all others.
+ <dt><b>-i </b><i>job-id</i>
+ <dd style="margin-left: 5.0em">Specifies an existing job to modify.
+ <dt><b>-m</b>
+diff --git a/doc/help/man-lpinfo.html b/doc/help/man-lpinfo.html
+index a1aed9421..30df7691c 100644
+--- a/doc/help/man-lpinfo.html
++++ b/doc/help/man-lpinfo.html
+@@ -12,10 +12,10 @@ lpinfo - show available devices or drivers (deprecated)
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpinfo</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
++<b>-E</b>
++] [
+ <b>-l</b>
+ ] [
+ <b>--device-id</b>
+@@ -40,10 +40,10 @@ lpinfo - show available devices or drivers (deprecated)
+ <br>
+ <b>lpinfo</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
++<b>-E</b>
++] [
+ <b>-l</b>
+ ] [
+ <b>--exclude-schemes</b>
+@@ -66,6 +66,7 @@ The first form (<i>-m</i>) lists the available drivers, while the second form (<
+ <dd style="margin-left: 5.0em">Forces encryption when connecting to the server.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Selects an alternate server.
++Note: This option must occur before all others.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Shows a "long" listing of devices or drivers.
+ <dt><b>--device-id </b><i>device-id-string</i>
+diff --git a/doc/help/man-lpmove.html b/doc/help/man-lpmove.html
+index d8019ee25..b0db753f9 100644
+--- a/doc/help/man-lpmove.html
++++ b/doc/help/man-lpmove.html
+@@ -12,10 +12,10 @@ lpmove - move a job or all jobs to a new destination
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpmove</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
++<b>-E</b>
++] [
+ <b>-U</b>
+ <i>username</i>
+ ]
+@@ -24,10 +24,10 @@ lpmove - move a job or all jobs to a new destination
+ <br>
+ <b>lpmove</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
++<b>-E</b>
++] [
+ <b>-U</b>
+ <i>username</i>
+ ]
+@@ -44,6 +44,7 @@ The <b>lpmove</b> command supports the following options:
+ <dd style="margin-left: 5.0em">Specifies an alternate username.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
++Note: This option must occur before all others.
+ </dl>
+ <h2 class="title"><a name="EXAMPLES">Examples</a></h2>
+ Move job 123 from "oldprinter" to "newprinter":
+diff --git a/doc/help/man-lpoptions.html b/doc/help/man-lpoptions.html
+index 6dda87f64..6af78290b 100644
+--- a/doc/help/man-lpoptions.html
++++ b/doc/help/man-lpoptions.html
+@@ -12,12 +12,12 @@
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpoptions</b>
+ [
+-<b>-E</b>
+-] [
+-<b>-U</b>
+-<i>username</i>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
++] [
++<b>-E</b>
++] [
++<b>-U</b>
++<i>username</i>
+ ]
+ <b>-d </b><i>destination</i>[<b>/</b><i>instance</i>]
+ [
+@@ -26,26 +26,26 @@
+ <br>
+ <b>lpoptions</b>
+ [
+-<b>-E</b>
+-] [
+-<b>-U</b>
+-<i>username</i>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
++<b>-E</b>
++] [
++<b>-U</b>
++<i>username</i>
++] [
+ <b>-p </b><i>destination</i>[<b>/</b><i>instance</i>]
+ ]
+ <b>-o </b><i>option</i>[<b>=</b><i>value</i>] ...
+ <br>
+ <b>lpoptions</b>
+ [
+-<b>-E</b>
+-] [
+-<b>-U</b>
+-<i>username</i>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
++<b>-E</b>
++] [
++<b>-U</b>
++<i>username</i>
++] [
+ <b>-p </b><i>destination</i>[<b>/</b><i>instance</i>]
+ ]
+ <b>-r</b>
+@@ -53,12 +53,12 @@
+ <br>
+ <b>lpoptions</b>
+ [
+-<b>-E</b>
+-] [
+-<b>-U</b>
+-<i>username</i>
+-] [
+ <b>-h </b><i>server</i>[<b>:</b><i>port</i>]
++] [
++<b>-E</b>
++] [
++<b>-U</b>
++<i>username</i>
+ ]
+ <b>-x </b><i>destination</i>[<b>/</b><i>instance</i>]
+ <h2 class="title"><a name="DESCRIPTION">Description</a></h2>
+@@ -84,6 +84,7 @@
+ This option overrides the system default printer for the current user.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Uses an alternate server.
++Note: This option must occur before all others.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Lists the printer specific options and their current settings.
+ <dt><b>-o </b><i>option</i>[<b>=</b><i>value</i>]
+@@ -119,7 +120,7 @@
+ <a href="man-lprm.html?TOPIC=Man+Pages"><b>lprm</b>(1),</a>
+ CUPS Online Help (<a href="http://localhost:631/help">http://localhost:631/help</a>)
+ <h2 class="title"><a name="COPYRIGHT">Copyright</a></h2>
+-Copyright &copy; 2007-2017 by Apple Inc.
++Copyright &copy; 2021-2022 by OpenPrinting.
+ 
+ </body>
+ </html>
+diff --git a/doc/help/man-lpq.html b/doc/help/man-lpq.html
+index 1c9e704ff..19e536d3c 100644
+--- a/doc/help/man-lpq.html
++++ b/doc/help/man-lpq.html
+@@ -12,13 +12,13 @@ lpq - show printer queue status
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpq</b>
+ [
++<b>-h </b><i>server</i>[<b>:</b><i>port</i>]
++] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+ <i>username</i>
+ ] [
+-<b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+-] [
+ <b>-P </b><i>destination</i>[<b>/</b><i>instance</i>]
+ ] [
+ <b>-a</b>
+@@ -44,6 +44,7 @@ Jobs queued on the default destination will be shown if no printer or class is s
+ <dd style="margin-left: 5.0em">Reports jobs on all printers.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
++Note: This option must occur before all others.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Requests a more verbose (long) reporting format.
+ </dl>
+diff --git a/doc/help/man-lpr.html b/doc/help/man-lpr.html
+index d044ab1a8..f9b19e1fe 100644
+--- a/doc/help/man-lpr.html
++++ b/doc/help/man-lpr.html
+@@ -12,10 +12,10 @@ lpr - print files
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpr</b>
+ [
+-<b>-E</b>
+-] [
+ <b>-H </b><i>server</i>[<b>:</b><i>port</i>]
+ ] [
++<b>-E</b>
++] [
+ <b>-U</b>
+ <i>username</i>
+ ] [
+@@ -67,6 +67,7 @@ The following options are recognized by <i>lpr</i>:
+ <dd style="margin-left: 5.0em">Forces encryption when connecting to the server.
+ <dt><b>-H </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
++Note: This option must occur before all others.
+ <dt><b>-C "</b><i>name</i><b>"</b>
+ <dd style="margin-left: 5.0em"><dt><b>-J "</b><i>name</i><b>"</b>
+ <dd style="margin-left: 5.0em"><dt><b>-T "</b><i>name</i><b>"</b>
+diff --git a/doc/help/man-lprm.html b/doc/help/man-lprm.html
+index 7410320a3..dbe7f20de 100644
+--- a/doc/help/man-lprm.html
++++ b/doc/help/man-lprm.html
+@@ -12,14 +12,13 @@ lprm - cancel print jobs
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lprm</b>
+ [
++<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
++] [
+ <b>-E</b>
+ ] [
+ <b>-U</b>
+ <i>username</i>
+ ] [
+-<b>-h</b>
+-<i>server</i>[<i>:port</i>]
+-] [
+ <b>-P</b>
+ <i>destination</i>[<i>/instance</i>]
+ ] [
+@@ -45,6 +44,7 @@ command supports the following options:
+ <dd style="margin-left: 5.0em">Specifies an alternate username.
+ <dt><b>-h </b><i>server</i>[<i>:port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
++Note: This option must occur before all others.
+ </dl>
+ <h2 class="title"><a name="CONFORMING_TO">Conforming To</a></h2>
+ The CUPS version of
+diff --git a/doc/help/man-lpstat.html b/doc/help/man-lpstat.html
+index f23089bbe..2c5dedc7c 100644
+--- a/doc/help/man-lpstat.html
++++ b/doc/help/man-lpstat.html
+@@ -12,6 +12,8 @@ lpstat - print cups status information
+ <h2 class="title"><a name="SYNOPSIS">Synopsis</a></h2>
+ <b>lpstat</b>
+ [
++<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
++] [
+ <b>-E</b>
+ ] [
+ <b>-H</b>
+@@ -19,8 +21,6 @@ lpstat - print cups status information
+ <b>-U</b>
+ <i>username</i>
+ ] [
+-<b>-h </b><i>hostname</i>[<b>:</b><i>port</i>]
+-] [
+ <b>-l</b>
+ ] [
+ <b>-W</b>
+@@ -91,6 +91,7 @@ If no classes are specified then all classes are listed.
+ <dd style="margin-left: 5.0em">Shows all available destinations on the local network.
+ <dt><b>-h </b><i>server</i>[<b>:</b><i>port</i>]
+ <dd style="margin-left: 5.0em">Specifies an alternate server.
++Note: This option must occur before all others.
+ <dt><b>-l</b>
+ <dd style="margin-left: 5.0em">Shows a long listing of printers, classes, or jobs.
+ <dt><b>-o </b>[<i>destination(s)</i>]
+diff --git a/man/cancel.man b/man/cancel.man
+index 34a5d9fc0..caea0ed69 100644
+--- a/man/cancel.man
++++ b/man/cancel.man
+@@ -10,12 +10,15 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH cancel 1 "CUPS" "15 April 2014" "Apple Inc."
++.TH cancel 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ cancel \- cancel jobs
+ .SH SYNOPSIS
+ .B cancel
+ [
++.B \-h
++.I hostname[:port]
++] [
+ .B \-E
+ ] [
+ .B \-U
+@@ -23,9 +26,6 @@
+ ] [
+ .B \-a
+ ] [
+-.B \-h
+-.I hostname[:port]
+-] [
+ .B \-u
+ .I username
+ ] [
+@@ -52,6 +52,7 @@
+ .TP 5
+ \fB\-h \fIhostname\fR[\fI:port\fR]
+ Specifies an alternate server.
++Note: This option must occur before all others.
+ .TP 5
+ \fB\-U \fIusername\fR
+ Specifies the username to use when connecting to the server.
+diff --git a/man/cupsctl.man b/man/cupsctl.man
+index 1b1ff4183..7e50d07ac 100644
+--- a/man/cupsctl.man
++++ b/man/cupsctl.man
+@@ -10,20 +10,20 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH cupsctl 8 "CUPS" "30 May 2016" "Apple Inc."
++.TH cupsctl 8 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ cupsctl \- configure cupsd.conf options
+ .SH SYNOPSIS
+ .B cupsctl
+ [
++.B \-h
++\fIserver\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-.B \-h
+-\fIserver\fR[\fB:\fIport\fR]
+-] [
+ \fB\-\-\fR[\fBno\-\fR]\fBdebug\-logging\fR
+ ] [
+ \fB\-\-\fR[\fBno\-\fR]\fBremote\-admin\fR
+@@ -51,6 +51,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Specifies the server address.
++Note: This option must occur before all others.
+ .TP 5
+ \fB\-\-\fR[\fBno\-\fR]\fBdebug\-logging\fR
+ Enables (disables) debug logging to the \fIerror_log\fR file.
+diff --git a/man/lp.man b/man/lp.man
+index a54f904a5..4bdd2de7b 100644
+--- a/man/lp.man
++++ b/man/lp.man
+@@ -10,12 +10,14 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lp 1 "CUPS" "2 May 2016" "Apple Inc."
++.TH lp 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lp \- print files
+ .SH SYNOPSIS
+ .B lp
+ [
++\fB\-h \fIhostname\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+@@ -25,8 +27,6 @@
+ ] [
+ \fB\-d \fIdestination\fR[\fB/\fIinstance\fR]
+ ] [
+-\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+-] [
+ .B \-m
+ ] [
+ .B \-n
+@@ -55,6 +55,8 @@
+ .br
+ .B lp
+ [
++\fB\-h \fIhostname\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+@@ -62,8 +64,6 @@
+ ] [
+ .B \-c
+ ] [
+-\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+-] [
+ .B \-i
+ .I job-id
+ ] [
+@@ -115,6 +115,7 @@
+ .TP 5
+ \fB\-h \fIhostname\fR[\fB:\fIport\fR]
+ Chooses an alternate server.
++Note: This option must occur before all others.
+ .TP 5
+ \fB\-i \fIjob-id\fR
+ Specifies an existing job to modify.
+diff --git a/man/lpinfo.man b/man/lpinfo.man
+index d238f9a60..d44b568d2 100644
+--- a/man/lpinfo.man
++++ b/man/lpinfo.man
+@@ -10,16 +10,16 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpinfo 8 "CUPS" "12 June 2014" "Apple Inc."
++.TH lpinfo 8 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpinfo \- show available devices or drivers
+ .SH SYNOPSIS
+ .B lpinfo
+ [
+-.B \-E
+-] [
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ] [
++.B \-E
++] [
+ .B \-l
+ ] [
+ .B \-\-device\-id
+@@ -44,10 +44,10 @@
+ .br
+ .B lpinfo
+ [
+-.B \-E
+-] [
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ] [
++.B \-E
++] [
+ .B \-l
+ ] [
+ .B \-\-exclude\-schemes
+@@ -71,6 +71,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Selects an alternate server.
++Note: This option must occur before all others.
+ .TP 5
+ .B \-l
+ Shows a "long" listing of devices or drivers.
+diff --git a/man/lpmove.man b/man/lpmove.man
+index af3c6b63c..62adba654 100644
+--- a/man/lpmove.man
++++ b/man/lpmove.man
+@@ -10,16 +10,16 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpmove 8 "CUPS" "26 May 2016" "Apple Inc."
++.TH lpmove 8 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpmove \- move a job or all jobs to a new destination
+ .SH SYNOPSIS
+ .B lpmove
+ [
+-.B \-E
+-] [
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ] [
++.B \-E
++] [
+ .B \-U
+ .I username
+ ]
+@@ -28,10 +28,10 @@
+ .br
+ .B lpmove
+ [
+-.B \-E
+-] [
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ] [
++.B \-E
++] [
+ .B \-U
+ .I username
+ ]
+@@ -50,6 +50,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Specifies an alternate server.
++Note: This option must occur before all others.
+ .SH EXAMPLES
+ Move job 123 from "oldprinter" to "newprinter":
+ .nf
+diff --git a/man/lpoptions.man.in b/man/lpoptions.man.in
+index 372f46a37..2eb5b6010 100644
+--- a/man/lpoptions.man.in
++++ b/man/lpoptions.man.in
+@@ -10,18 +10,18 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpoptions 1 "CUPS" "12 June 2014" "Apple Inc."
++.TH lpoptions 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpoptions \- display or set printer options and defaults
+ .SH SYNOPSIS
+ .B lpoptions
+ [
++\fB\-h \fIserver\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+-] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ]
+ \fB\-d \fIdestination\fR[\fB/\fIinstance\fR]
+ [
+@@ -30,13 +30,13 @@
+ .br
+ .B lpoptions
+ [
++\fB\-h \fIserver\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+-] [
+ \fB\-p \fIdestination\fR[\fB/\fIinstance\fR]
+ ]
+ \fB\-o \fIoption\fR[\fB=\fIvalue\fR] ...
+@@ -43,13 +43,13 @@
+ .br
+ .B lpoptions
+ [
++\fB\-h \fIserver\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+-] [
+ \fB\-p \fIdestination\fR[\fB/\fIinstance\fR]
+ ]
+ .B \-r
+@@ -57,12 +57,12 @@
+ .br
+ .B lpoptions
+ [
++\fB\-h \fIserver\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+-] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+ ]
+ \fB\-x \fIdestination\fR[\fB/\fIinstance\fR]
+ .SH DESCRIPTION
+@@ -96,6 +96,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Uses an alternate server.
++Note: This option must occur before all others.
+ .TP 5
+ .B \-l
+ Lists the printer specific options and their current settings.
+diff --git a/man/lpq.man b/man/lpq.man
+index ce23a6c81..a81633ecb 100644
+--- a/man/lpq.man
++++ b/man/lpq.man
+@@ -10,19 +10,19 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpq 1 "CUPS" "12 June 2014" "Apple Inc."
++.TH lpq 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpq \- show printer queue status
+ .SH SYNOPSIS
+ .B lpq
+ [
++\fB\-h \fIserver\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-\fB\-h \fIserver\fR[\fB:\fIport\fR]
+-] [
+ \fB\-P \fIdestination\fR[\fB/\fIinstance\fR]
+ ] [
+ .B \-a
+@@ -53,6 +53,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Specifies an alternate server.
++Note: This option must occur before all others.
+ .TP 5
+ .B \-l
+ Requests a more verbose (long) reporting format.
+diff --git a/man/lpr.man b/man/lpr.man
+index e5f9f9018..77a62b305 100644
+--- a/man/lpr.man
++++ b/man/lpr.man
+@@ -10,16 +10,16 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpr 1 "CUPS" "2 May 2016" "Apple Inc."
++.TH lpr 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpr \- print files
+ .SH SYNOPSIS
+ .B lpr
+ [
+-.B \-E
+-] [
+ \fB\-H \fIserver\fR[\fB:\fIport\fR]
+ ] [
++.B \-E
++] [
+ .B \-U
+ .I username
+ ] [
+@@ -72,6 +72,7 @@
+ .TP 5
+ \fB\-H \fIserver\fR[\fB:\fIport\fR]
+ Specifies an alternate server.
++Note: This option must occur before all others.
+ .TP 5
+ \fB\-C "\fIname\fB"\fR
+ .TP 5
+diff --git a/man/lprm.man b/man/lprm.man
+index 094166539..0cf88ac51 100644
+--- a/man/lprm.man
++++ b/man/lprm.man
+@@ -10,20 +10,19 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lprm 1 "CUPS" "22 May 2014" "Apple Inc."
++.TH lprm 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lprm \- cancel print jobs
+ .SH SYNOPSIS
+ .B lprm
+ [
++\fB\-h \fIhostname\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-U
+ .I username
+ ] [
+-.B \-h
+-.IR server [ :port ]
+-] [
+ .B \-P
+ .IR destination [ /instance ]
+ ] [
+@@ -52,6 +51,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fI:port\fR]
+ Specifies an alternate server.
++Note: This option must occur before all others.
+ .SH CONFORMING TO
+ The CUPS version of
+ .B lprm
+diff --git a/man/lpstat.man b/man/lpstat.man
+index 0a10cd9bc..88acff7b3 100644
+--- a/man/lpstat.man
++++ b/man/lpstat.man
+@@ -1,8 +1,8 @@
+ .\"
+ .\" lpstat man page for CUPS.
+ .\"
+-.\" Copyright 2007-2017 by Apple Inc.
+-.\" Copyright 1997-2006 by Easy Software Products.
++.\" Copyright © 2007-2019 by Apple Inc.
++.\" Copyright © 1997-2006 by Easy Software Products.
+ .\"
+ .\" These coded instructions, statements, and computer programs are the
+ .\" property of Apple Inc. and are protected by Federal copyright
+@@ -10,12 +10,14 @@
+ .\" which should have been included with this file.  If this file is
+ .\" file is missing or damaged, see the license at "http://www.cups.org/".
+ .\"
+-.TH lpstat 1 "CUPS" "26 May 2017" "Apple Inc."
++.TH lpstat 1 "CUPS" "2022-05-02" "OpenPrinting"
+ .SH NAME
+ lpstat \- print cups status information
+ .SH SYNOPSIS
+ .B lpstat
+ [
++\fB\-h \fIhostname\fR[\fB:\fIport\fR]
++] [
+ .B \-E
+ ] [
+ .B \-H
+@@ -23,8 +25,6 @@
+ .B \-U
+ .I username
+ ] [
+-\fB\-h \fIhostname\fR[\fB:\fIport\fR]
+-] [
+ .B \-l
+ ] [
+ .B \-W
+@@ -104,6 +104,7 @@
+ .TP 5
+ \fB\-h \fIserver\fR[\fB:\fIport\fR]
+ Specifies an alternate server.
++Note: This option must occur before all others.
+ .TP 5
+ .B \-l
+ Shows a long listing of printers, classes, or jobs.

SOURCES/0001-Use-cupsGetNamedDest-for-legacy-printing-APIs-Issue-.patch

@@ -0,0 +1,109 @@
+From 7271db11d27fe436f0c743bed3be8a5c6f93f2c2 Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Mon, 9 Apr 2018 09:50:19 -0400
+Subject: [PATCH] Use cupsGetNamedDest for legacy printing APIs (Issue #5288)
+
+---
+ cups/util.c                          | 59 +++++-----------------------
+ xcode/CUPS.xcodeproj/project.pbxproj |  6 ++-
+ 2 files changed, 15 insertions(+), 50 deletions(-)
+
+diff --git a/cups/util.c b/cups/util.c
+index ebc54d3cf..b15963e9e 100644
+--- a/cups/util.c
++++ b/cups/util.c
+@@ -21,19 +22,6 @@
+ #endif /* WIN32 || __EMX__ */
+ 
+ 
+-/*
+- * Enumeration data and callback...
+- */
+-
+-typedef struct _cups_createdata_s
+-{
+-  const char  *name;                    /* Destination name */
+-  cups_dest_t *dest;                    /* Matching destination */
+-} _cups_createdata_t;
+-
+-static int  cups_create_cb(_cups_createdata_t *data, unsigned flags, cups_dest_t *dest);
+-
+-
+ /*
+  * 'cupsCancelJob()' - Cancel a print job on the default server.
+  *
+@@ -168,7 +156,7 @@ cupsCreateJob(
+ {
+   int		job_id = 0;		/* job-id value */
+   ipp_status_t  status;                 /* Create-Job status */
+-  _cups_createdata_t data;              /* Enumeration data */
++  cups_dest_t	*dest;			/* Destination */
+   cups_dinfo_t  *info;                  /* Destination information */
+ 
+ 
+@@ -188,12 +176,7 @@ cupsCreateJob(
+   * Lookup the destination...
+   */
+ 
+-  data.name = name;
+-  data.dest = NULL;
+-
+-  cupsEnumDests(0, 1000, NULL, 0, 0, (cups_dest_cb_t)cups_create_cb, &data);
+-
+-  if (!data.dest)
++  if ((dest = cupsGetNamedDest(http, name, NULL)) == NULL)
+   {
+     DEBUG_puts("1cupsCreateJob: Destination not found.");
+     _cupsSetError(IPP_STATUS_ERROR_INTERNAL, strerror(ENOENT), 0);
+@@ -205,18 +188,18 @@ cupsCreateJob(
+   */
+ 
+   DEBUG_puts("1cupsCreateJob: Querying destination info.");
+-  if ((info = cupsCopyDestInfo(http, data.dest)) == NULL)
++  if ((info = cupsCopyDestInfo(http, dest)) == NULL)
+   {
+     DEBUG_puts("1cupsCreateJob: Query failed.");
+-    cupsFreeDests(1, data.dest);
++    cupsFreeDests(1, dest);
+     return (0);
+   }
+ 
+-  status = cupsCreateDestJob(http, data.dest, info, &job_id, title, num_options, options);
++  status = cupsCreateDestJob(http, dest, info, &job_id, title, num_options, options);
+   DEBUG_printf(("1cupsCreateJob: cupsCreateDestJob returned %04x (%s)", status, ippErrorString(status)));
+ 
+   cupsFreeDestInfo(info);
+-  cupsFreeDests(1, data.dest);
++  cupsFreeDests(1, dest);
+ 
+  /*
+   * Return the job...
+@@ -968,25 +951,3 @@ cupsStartDocument(
+   return (status);
+ }
+ 
+-
+-/*
+- * 'cups_create_cb()' - Find the destination for printing.
+- */
+-
+-static int                              /* O - 0 on match */
+-cups_create_cb(
+-    _cups_createdata_t *data,           /* I - Data from cupsCreateJob call */
+-    unsigned           flags,           /* I - Enumeration flags */
+-    cups_dest_t        *dest)           /* I - Destination */
+-{
+-  DEBUG_printf(("2cups_create_cb(data=%p(%s), flags=%08x, dest=%p(%s))", (void *)data, data->name, flags, (void *)dest, dest->name));
+-
+-  (void)flags;
+-
+-  if (dest->instance || strcasecmp(data->name, dest->name))
+-    return (1);
+-
+-  cupsCopyDest(dest, 0, &data->dest);
+-
+-  return (0);
+-}
+-- 
+2.35.1
+

SOURCES/0001-Use-purge-job-instead-of-purge-jobs-when-canceling-a.patch

@@ -0,0 +1,48 @@
+From c5ad7aaf6c8063a39974c6b4a3cf59b7f912daae Mon Sep 17 00:00:00 2001
+From: Bryan Mason <bmason@redhat.com>
+Date: Tue, 27 Jun 2023 04:18:46 -0700
+Subject: [PATCH 1/2] Use "purge-job" instead of "purge-jobs" when canceling a
+ single job (#742)
+
+The command "cancel -x <job>" adds "purge-jobs true" to the Cancel-Job
+operation; however, the correct attribute to use for Cancel-job is
+"purge-job" (singular), not "purge-jobs" (plural).  As a result, job
+files are not removed from /var/spool/cups when "cancel -x <job>" is
+executed.
+
+This patch resolves the issue by adding "purge-job" when the IPP
+operation is Cancel-Job and "purge-jobs" for other IPP operations
+(Purge-Jobs, Cancel-Jobs, and Cancel-My-Jobs)
+---
+ systemv/cancel.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/systemv/cancel.c b/systemv/cancel.c
+index 572f413e1..f5b8e12b5 100644
+--- a/systemv/cancel.c
++++ b/systemv/cancel.c
+@@ -260,6 +260,7 @@ main(int  argc,				/* I - Number of command-line arguments */
+       *    attributes-natural-language
+       *    printer-uri + job-id *or* job-uri
+       *    [requesting-user-name]
++      *    [purge-job] or [purge-jobs]
+       */
+ 
+       request = ippNewRequest(op);
+@@ -294,7 +295,12 @@ main(int  argc,				/* I - Number of command-line arguments */
+                      "requesting-user-name", NULL, cupsUser());
+ 
+       if (purge)
+-	ippAddBoolean(request, IPP_TAG_OPERATION, "purge-jobs", (char)purge);
++      {
++	if (op == IPP_CANCEL_JOB)
++	  ippAddBoolean(request, IPP_TAG_OPERATION, "purge-job", (char)purge);
++	else
++	  ippAddBoolean(request, IPP_TAG_OPERATION, "purge-jobs", (char)purge);
++      }
+ 
+      /*
+       * Do the request and get back a response...
+-- 
+2.41.0
+

SOURCES/0001-cgi-bin-ipp-var.c-Use-guest-user-for-Move-Job-when-n.patch

@@ -0,0 +1,16 @@
+diff --git a/cgi-bin/ipp-var.c b/cgi-bin/ipp-var.c
+index 92f1501..7edc058 100644
+--- a/cgi-bin/ipp-var.c
++++ b/cgi-bin/ipp-var.c
+@@ -275,10 +275,7 @@ cgiMoveJobs(http_t     *http,		/* I - Connection to server */
+   */
+ 
+   if ((user = getenv("REMOTE_USER")) == NULL)
+-  {
+-    puts("Status: 401\n");
+-    exit(0);
+-  }
++    user = "guest";
+ 
+  /*
+   * See if the user has already selected a new destination...

SOURCES/0001-cups-dests.c-cupsGetNamedDest-set-IPP_STATUS_ERROR_N.patch

@@ -0,0 +1,65 @@
+From 4ddeb8544e2e5c63a405d9e093ac24704f3deb03 Mon Sep 17 00:00:00 2001
+From: Zdenek Dohnal <zdohnal@redhat.com>
+Date: Tue, 21 Jul 2020 12:54:22 +0200
+Subject: [PATCH] cups/dests.c: cupsGetNamedDest() - set
+ IPP_STATUS_ERROR_NOT_FOUND error if queue was not found lp.c/lpr.c: check for
+ IPP_STATUS_ERROR_NOT_FOUND and generate a proper message if hit
+
+---
+ berkeley/lpr.c | 6 ++++++
+ cups/dest.c    | 3 +++
+ systemv/lp.c   | 6 ++++++
+ 3 files changed, 15 insertions(+)
+
+diff --git a/berkeley/lpr.c b/berkeley/lpr.c
+index 627fa6a4e..a8f78b881 100644
+--- a/berkeley/lpr.c
++++ b/berkeley/lpr.c
+@@ -234,6 +234,12 @@ main(int  argc,				/* I - Number of command-line arguments */
+ 		_cupsLangPrintf(stderr, _("%s: Error - add '/version=1.1' to server name."), argv[0]);
+ 		return (1);
+ 	      }
++	      else if (cupsLastError() == IPP_STATUS_ERROR_NOT_FOUND)
++	      {
++		_cupsLangPrintf(stderr,
++				_("%s: Error - The printer or class does not exist."), argv[0]);
++		return (1);
++	      }
+ 	      break;
+ 
+ 	  case '#' : /* Number of copies */
+diff --git a/cups/dest.c b/cups/dest.c
+index cde987a09..2017792a7 100644
+--- a/cups/dest.c
++++ b/cups/dest.c
+@@ -1839,7 +1839,10 @@ cupsGetNamedDest(http_t     *http,	/* I - Connection to server or @code CUPS_HTT
+       cupsEnumDests(0, 1000, NULL, 0, 0, (cups_dest_cb_t)cups_name_cb, &data);
+ 
+       if (!data.dest)
++      {
++        _cupsSetError(IPP_STATUS_ERROR_NOT_FOUND, _("The printer or class does not exist."), 1);
+         return (NULL);
++      }
+ 
+       dest = data.dest;
+     }
+diff --git a/systemv/lp.c b/systemv/lp.c
+index 298c15825..d918b4b14 100644
+--- a/systemv/lp.c
++++ b/systemv/lp.c
+@@ -161,6 +161,12 @@ main(int  argc,				/* I - Number of command-line arguments */
+ 				  "name."), argv[0]);
+ 		return (1);
+ 	      }
++	      else if (cupsLastError() == IPP_STATUS_ERROR_NOT_FOUND)
++	      {
++		_cupsLangPrintf(stderr,
++				_("%s: Error - The printer or class does not exist."), argv[0]);
++		return (1);
++	      }
+ 	      break;
+ 
+ 	  case 'f' : /* Form */
+-- 
+2.31.1
+

SOURCES/0001-cups-http-addr.c-Set-listen-backlog-size-to-INT_MAX-.patch

@@ -0,0 +1,35 @@
+From 876fdc1c90a885a58644c8757bc1283c9fd5bcb7 Mon Sep 17 00:00:00 2001
+From: Vasilis Liaskovitis <vliaskovitis@suse.com>
+Date: Wed, 1 Mar 2023 13:46:28 +0100
+Subject: [PATCH] cups/http-addr.c: Set listen backlog size to INT_MAX (fixes
+ #308)
+
+Use a listen queue size of INT_MAX, which should default to the maximum
+supported queue size on the system.
+
+This avoids the problem of the listening backlog queue getting full when
+there are too many requests at the same time. The problem was observed
+with the previous backlog size (128) by customers when submitting large
+batches of print jobs, resulting in some jobs getting lost.
+
+Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com>
+---
+ cups/http-addr.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/cups/http-addr.c b/cups/http-addr.c
+index a61ee0449..6aeeb8074 100644
+--- a/cups/http-addr.c
++++ b/cups/http-addr.c
+@@ -249,7 +249,7 @@ httpAddrListen(http_addr_t *addr,	/* I - Address to bind to */
+   * Listen...
+   */
+ 
+-  if (listen(fd, 5))
++  if (listen(fd, INT_MAX))
+   {
+     _cupsSetHTTPError(HTTP_STATUS_ERROR);
+ 
+-- 
+2.41.0
+

SOURCES/0001-cups-strlcpy-handle-zero-size.patch

@@ -0,0 +1,26 @@
+From 5e3107e734f06d410a490e8bc923dc3119f17671 Mon Sep 17 00:00:00 2001
+From: Michael R Sweet <michael.r.sweet@gmail.com>
+Date: Wed, 17 May 2023 12:59:57 -0400
+Subject: [PATCH] Consensus fix.
+
+---
+ cups/string.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/cups/string.c b/cups/string.c
+index 00454203c..b4fc12050 100644
+--- a/cups/string.c
++++ b/cups/string.c
+@@ -730,6 +731,9 @@ _cups_strlcpy(char       *dst,		/* O - Destination string */
+   size_t	srclen;			/* Length of source string */
+ 
+ 
++  if (size == 0)
++    return (0);
++
+  /*
+   * Figure out how much room is needed...
+   */
+-- 
+2.40.1
+

SOURCES/0001-cups-tls-gnutls.c-Use-always-GNUTLS_SHUT_WR.patch

@@ -0,0 +1,55 @@
+From bdb1ca45454d90410031c4c2054005a995f76180 Mon Sep 17 00:00:00 2001
+From: Zdenek Dohnal <zdohnal@redhat.com>
+Date: Wed, 6 Apr 2022 15:04:45 +0200
+Subject: [PATCH] cups/tls-gnutls.c: Use always GNUTLS_SHUT_WR
+
+The current mode for `gnutls_bye()` in client use cases strictly
+follows TLS v1.2 standard, which in this particular part says:
+
+```
+Unless some other fatal alert has been transmitted, each party is
+required to send a close_notify alert before closing the write
+side of the connection.  The other party MUST respond with a
+close_notify alert of its own and close down the connection immediately,
+discarding any pending writes.  It is not required for the initiator
+of the close to wait for the responding close_notify alert before
+closing the read side of the connection.
+```
+
+and waits for the other side of TLS connection to confirm the close.
+
+Unfortunately it can undesired for reasons:
+- we support switching of TLS versions in CUPS, and this mode strictly
+  follows TLS v1.2 - so for older version this behavior is not expected
+  and can cause delays
+- even some TLS v1.2 implementations (like Windows Server 2016) don't
+  comply TLS v1.2 behavior even if it says it does - in that case,
+  encrypted printing takes 30s till HTTP timeout is reached, because the
+  other side didn't send confirmation
+- AFAIU openssl's SSL_shutdown() doesn't make this TLS v1.2 difference,
+  so we could end up with two TLS implementations in CUPS which will
+  behave differently
+
+Since the standard defines that waiting for confirmation is not required
+and due the problems above, I would propose using GNUTLS_SHUT_WR mode
+regardless of HTTP mode.
+---
+ cups/tls-gnutls.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/cups/tls-gnutls.c b/cups/tls-gnutls.c
+index c55995b2b..f87b4f4df 100644
+--- a/cups/tls-gnutls.c
++++ b/cups/tls-gnutls.c
+@@ -1667,7 +1667,7 @@ _httpTLSStop(http_t *http)		/* I - Connection to server */
+   int	error;				/* Error code */
+ 
+ 
+-  error = gnutls_bye(http->tls, http->mode == _HTTP_MODE_CLIENT ? GNUTLS_SHUT_RDWR : GNUTLS_SHUT_WR);
++  error = gnutls_bye(http->tls, GNUTLS_SHUT_WR);
+   if (error != GNUTLS_E_SUCCESS)
+     _cupsSetError(IPP_STATUS_ERROR_INTERNAL, gnutls_strerror(errno), 0);
+ 
+-- 
+2.35.1
+

SOURCES/0001-httpAddrConnect2-Check-for-error-if-POLLHUP-is-in-va.patch

@@ -0,0 +1,43 @@
+diff -up cups-2.2.6/cups/http-addrlist.c.cupsgetjobs-pollhup cups-2.2.6/cups/http-addrlist.c
+--- cups-2.2.6/cups/http-addrlist.c.cupsgetjobs-pollhup	2023-12-19 18:25:15.484637450 +0100
++++ cups-2.2.6/cups/http-addrlist.c	2023-12-19 18:28:57.129163387 +0100
+@@ -313,6 +313,39 @@ httpAddrConnect2(
+       {
+ #  ifdef HAVE_POLL
+ 	DEBUG_printf(("pfds[%d].revents=%x\n", i, pfds[i].revents));
++
++#    ifdef _WIN32
++	if (((WSAGetLastError() == WSAEINPROGRESS) && (pfds[i].revents & POLLIN) && (pfds[i].revents & POLLOUT)) ||
++	    ((pfds[i].revents & POLLHUP) && (pfds[i].revents & (POLLIN|POLLOUT))))
++#    else
++	if (((errno == EINPROGRESS) && (pfds[i].revents & POLLIN) && (pfds[i].revents & POLLOUT)) ||
++	    ((pfds[i].revents & POLLHUP) && (pfds[i].revents & (POLLIN|POLLOUT))))
++#    endif /* _WIN32 */
++	{
++	  // Some systems generate POLLIN or POLLOUT together with POLLHUP when doing
++	  // asynchronous connections. The solution seems to be to use getsockopt to
++	  // check the SO_ERROR value and ignore the POLLHUP if there is no error or
++	  // the error is EINPROGRESS.
++
++	  int	    sres,		 /* Return value from getsockopt() - 0, or -1 if error */
++		    serr;		 /* Option SO_ERROR value */
++	  socklen_t slen = sizeof(serr); /* Option value size */
++
++	  sres = getsockopt(fds[i], SOL_SOCKET, SO_ERROR, &serr, &slen);
++
++	  if (sres || serr)
++	  {
++	    pfds[i].revents |= POLLERR;
++#    ifdef DEBUG
++	    DEBUG_printf(("1httpAddrConnect2: getsockopt returned: %d with error: %s", sres, strerror(serr)));
++#    endif
++	  }
++	  else if (pfds[i].revents && (pfds[i].revents & POLLHUP) && (pfds[i].revents & (POLLIN | POLLOUT)))
++	  {
++	    pfds[i].revents &= ~POLLHUP;
++	  }
++	}
++
+ 	if (pfds[i].revents && !(pfds[i].revents & (POLLERR | POLLHUP)))
+ #  else
+ 	if (FD_ISSET(fds[i], &input_set) && !FD_ISSET(fds[i], &error_set))

SOURCES/0001-scheduler-cert.c-Fix-string-comparison-fixes-CVE-202.patch

@@ -0,0 +1,35 @@
+From de4f8c196106033e4c372dce3e91b9d42b0b9444 Mon Sep 17 00:00:00 2001
+From: Zdenek Dohnal <zdohnal@redhat.com>
+Date: Thu, 26 May 2022 06:27:04 +0200
+Subject: [PATCH] scheduler/cert.c: Fix string comparison (fixes
+ CVE-2022-26691)
+
+The previous algorithm didn't expect the strings can have a different
+length, so one string can be a substring of the other and such substring
+was reported as equal to the longer string.
+---
+ CHANGES.md       | 1 +
+ scheduler/cert.c | 9 ++++++++-
+ 2 files changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/scheduler/cert.c b/scheduler/cert.c
+index b268bf1b2..9b65b96c9 100644
+--- a/scheduler/cert.c
++++ b/scheduler/cert.c
+@@ -444,5 +444,12 @@ ctcompare(const char *a,		/* I - First string */
+     b ++;
+   }
+ 
+-  return (result);
++ /*
++  * The while loop finishes when *a == '\0' or *b == '\0'
++  * so after the while loop either both *a and *b == '\0',
++  * or one points inside a string, so when we apply bitwise OR on *a,
++  * *b and result, we get a non-zero return value if the compared strings don't match.
++  */
++
++  return (result | *a | *b);
+ }
+-- 
+2.36.1
+

SOURCES/0001-scheduler-conf.c-Print-to-stderr-if-we-don-t-open-cu.patch

@@ -0,0 +1,36 @@
+From db9cecdd932e58c51d2d659f63415ad47d151717 Mon Sep 17 00:00:00 2001
+From: Zdenek Dohnal <zdohnal@redhat.com>
+Date: Fri, 1 Sep 2023 17:11:54 +0200
+Subject: [PATCH] scheduler/conf.c: Print to stderr if we don't open
+ cups-files.conf
+
+In case cupsd can't open the cups-files.conf, the error message is lost
+if journal and syslog don't exist or work on system (usually in
+containers).
+
+Log the error into stderr at this place to get the error message if
+needed.
+---
+ scheduler/conf.c | 6 +-----
+ 1 file changed, 1 insertion(+), 5 deletions(-)
+
+diff --git a/scheduler/conf.c b/scheduler/conf.c
+index b18535162..4fa7eb1df 100644
+--- a/scheduler/conf.c
++++ b/scheduler/conf.c
+@@ -811,11 +811,7 @@ cupsdReadConfiguration(void)
+     cupsdLogMessage(CUPSD_LOG_INFO, "No %s, using defaults.", CupsFilesFile);
+   else
+   {
+-#ifdef HAVE_SYSTEMD_SD_JOURNAL_H
+-    sd_journal_print(LOG_ERR, "Unable to open \"%s\" - %s", CupsFilesFile, strerror(errno));
+-#else
+-    syslog(LOG_LPR, "Unable to open \"%s\" - %s", CupsFilesFile, strerror(errno));
+-#endif /* HAVE_SYSTEMD_SD_JOURNAL_H */
++    fprintf(stderr, "Unable to read \"%s\" - %s\n", CupsFilesFile, strerror(errno));
+ 
+     return (0);
+   }
+-- 
+2.41.0
+

SOURCES/0001-scheduler-job.c-use-gziptoany-for-raw-files-not-just.patch

@@ -0,0 +1,38 @@
+From 08e9b6e1f8497a8159d6bd7cd6dc96ae79a2e704 Mon Sep 17 00:00:00 2001
+From: Bryan Mason <bmason@redhat.com>
+Date: Thu, 15 Jul 2021 16:26:27 -0700
+Subject: [PATCH] scheduler/job.c: use gziptoany for raw files (not just raw
+ printers)
+
+---
+ scheduler/job.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/scheduler/job.c b/scheduler/job.c
+index d8c2efcc6..b448acda5 100644
+--- a/scheduler/job.c
++++ b/scheduler/job.c
+@@ -501,6 +501,7 @@ cupsdContinueJob(cupsd_job_t *job)	/* I - Job */
+   int			backroot;	/* Run backend as root? */
+   int			pid;		/* Process ID of new filter process */
+   int			banner_page;	/* 1 if banner page, 0 otherwise */
++  int			raw_file;       /* 1 if file type is vnd.cups-raw */
+   int			filterfds[2][2] = { { -1, -1 }, { -1, -1 } };
+ 					/* Pipes used between filters */
+   int			envc;		/* Number of environment variables */
+@@ -746,8 +747,11 @@ cupsdContinueJob(cupsd_job_t *job)	/* I - Job */
+   * Add decompression/raw filter as needed...
+   */
+ 
++  raw_file = !strcmp(job->filetypes[job->current_file]->super, "application") &&
++    !strcmp(job->filetypes[job->current_file]->type, "vnd.cups-raw");
++  
+   if ((job->compressions[job->current_file] && (!job->printer->remote || job->num_files == 1)) ||
+-      (!job->printer->remote && job->printer->raw && job->num_files > 1))
++      (!job->printer->remote && (job->printer->raw || raw_file) && job->num_files > 1))
+   {
+    /*
+     * Add gziptoany filter to the front of the list...
+-- 
+2.31.1
+

SOURCES/cups-autostart-when-enabled.patch

@@ -0,0 +1,10 @@
+diff --git a/scheduler/org.cups.cupsd.service.in b/scheduler/org.cups.cupsd.service.in
+index 307d69b..add238b 100644
+--- a/scheduler/org.cups.cupsd.service.in
++++ b/scheduler/org.cups.cupsd.service.in
+@@ -10,4 +10,4 @@ Restart=on-failure
+ 
+ [Install]
+ Also=cups.socket cups.path
+-WantedBy=printer.target
++WantedBy=printer.target multi-user.target

SOURCES/cups-check-for-listeners.patch

@@ -0,0 +1,94 @@
+diff --git a/scheduler/conf.c b/scheduler/conf.c
+index c113eb3..77ce179 100644
+--- a/scheduler/conf.c
++++ b/scheduler/conf.c
+@@ -573,6 +573,18 @@ cupsdReadConfiguration(void)
+ 
+   cupsdDeleteAllListeners();
+ 
++ /*
++  * Allocate Listeners array
++  */
++
++  Listeners = cupsArrayNew(NULL, NULL);
++
++  if (!Listeners)
++  {
++    fprintf(stderr, "Unable to allocate memory for array Listeners.\n");
++    return (0);
++  }
++
+   old_remote_port = RemotePort;
+   RemotePort      = 0;
+ 
+@@ -1080,28 +1092,6 @@ cupsdReadConfiguration(void)
+     }
+   }
+ 
+- /*
+-  * Check that we have at least one listen/port line; if not, report this
+-  * as an error and exit!
+-  */
+-
+-  if (cupsArrayCount(Listeners) == 0)
+-  {
+-   /*
+-    * No listeners!
+-    */
+-
+-    cupsdLogMessage(CUPSD_LOG_EMERG,
+-                    "No valid Listen or Port lines were found in the "
+-		    "configuration file.");
+-
+-   /*
+-    * Commit suicide...
+-    */
+-
+-    cupsdEndProcess(getpid(), 0);
+-  }
+-
+  /*
+   * Set the default locale using the language and charset...
+   */
+@@ -3162,17 +3152,6 @@ read_cupsd_conf(cups_file_t *fp)	/* I - File to read from */
+         * Allocate another listener...
+ 	*/
+ 
+-        if (!Listeners)
+-	  Listeners = cupsArrayNew(NULL, NULL);
+-
+-	if (!Listeners)
+-	{
+-          cupsdLogMessage(CUPSD_LOG_ERROR,
+-	                  "Unable to allocate %s at line %d - %s.",
+-	                  line, linenum, strerror(errno));
+-          break;
+-	}
+-
+         if ((lis = calloc(1, sizeof(cupsd_listener_t))) == NULL)
+ 	{
+           cupsdLogMessage(CUPSD_LOG_ERROR,
+diff --git a/scheduler/main.c b/scheduler/main.c
+index a6e2c3a..b935c52 100644
+--- a/scheduler/main.c
++++ b/scheduler/main.c
+@@ -2113,6 +2113,21 @@ service_checkin(void)
+     service_add_listener(fd, 0);
+   }
+ #endif /* HAVE_LAUNCHD */
++
++  if (cupsArrayCount(Listeners) == 0)
++  {
++   /*
++    * No listeners!
++    */
++
++    cupsdLogMessage(CUPSD_LOG_EMERG, "No listener sockets present.");
++
++   /*
++    * Commit suicide...
++    */
++
++    cupsdEndProcess(getpid(), 0);
++  }
+ }

SOURCES/cups-cupsd-too-chatty.patch

@@ -0,0 +1,12 @@
+diff -Napur cups-2.2.6-old/scheduler/job.c cups-2.2.6-new/scheduler/job.c
+--- cups-2.2.6-old/scheduler/job.c	2022-04-12 17:32:00.635282080 -0700
++++ cups-2.2.6-new/scheduler/job.c	2022-04-12 17:33:34.349452614 -0700
+@@ -474,7 +474,7 @@ cupsdCleanJobs(void)
+         cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing from history.");
+         cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+       }
+-      else if (job->file_time && job->file_time <= curtime)
++      else if (job->file_time && job->file_time <= curtime && job->num_files > 0)
+       {
+         cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing document files.");
+         remove_job_files(job);

SOURCES/cups-cve202010001.patch

@@ -0,0 +1,61 @@
+Fix for CVE-2020-10001, which is a bug in the CUPS ippReadIO function when it
+reads tagged string values (nameWithLanguage and textWithLanguage).  The
+previous code verified that the length of the sub-strings (language identifier
+and name/text value) did not exceed the size of the allocated buffer (1 byte
+larger than the maximum IPP value size of 32767 bytes), but did not validate
+against the length of the actual IPP value.
+
+The issues introduced by this vulnerability include:
+
+- Potential information disclosure by copying uninitialized areas of memory into
+  an IPP string value.
+- Potential Denial of Service by supplying/using invalid string values when
+  strict validation has been disabled by the system administrator.
+
+This change ensures that:
+
+1. The language identifier does not extend beyond the end of the IPP value.
+2. The length of the name/text string is within the IPP value.
+3. The name/text string is within the IPP value.
+
+diff --git a/cups/ipp.c b/cups/ipp.c
+index 3d529346c..adbb26fba 100644
+--- a/cups/ipp.c
++++ b/cups/ipp.c
+@@ -2866,7 +2866,8 @@ ippReadIO(void       *src,		/* I - Data source */
+   unsigned char		*buffer,	/* Data buffer */
+ 			string[IPP_MAX_TEXT],
+ 					/* Small string buffer */
+-			*bufptr;	/* Pointer into buffer */
++			*bufptr,	/* Pointer into buffer */
++			*bufend;	/* End of buffer */
+   ipp_attribute_t	*attr;		/* Current attribute */
+   ipp_tag_t		tag;		/* Current tag */
+   ipp_tag_t		value_tag;	/* Current value tag */
+@@ -3441,6 +3442,7 @@ ippReadIO(void       *src,		/* I - Data source */
+ 		}
+
+                 bufptr = buffer;
++                bufend = buffer + n;
+
+ 	       /*
+ 	        * text-with-language and name-with-language are composite
+@@ -3454,7 +3456,7 @@ ippReadIO(void       *src,		/* I - Data source */
+
+ 		n = (bufptr[0] << 8) | bufptr[1];
+
+-		if ((bufptr + 2 + n) >= (buffer + IPP_BUF_SIZE) || n >= (int)sizeof(string))
++		if ((bufptr + 2 + n + 2) > bufend || n >= (int)sizeof(string))
+ 		{
+ 		  _cupsSetError(IPP_STATUS_ERROR_INTERNAL,
+ 		                _("IPP language length overflows value."), 1);
+@@ -3481,7 +3483,7 @@ ippReadIO(void       *src,		/* I - Data source */
+                 bufptr += 2 + n;
+ 		n = (bufptr[0] << 8) | bufptr[1];
+
+-		if ((bufptr + 2 + n) >= (buffer + IPP_BUF_SIZE))
++		if ((bufptr + 2 + n) > bufend)
+ 		{
+ 		  _cupsSetError(IPP_STATUS_ERROR_INTERNAL,
+ 		                _("IPP string length overflows value."), 1);
+

SOURCES/cups-dirtyclean.patch

@@ -0,0 +1,13 @@
+diff --git a/scheduler/main.c b/scheduler/main.c
+index 592531a..a6e2c3a 100644
+--- a/scheduler/main.c
++++ b/scheduler/main.c
+@@ -947,7 +947,7 @@ main(int  argc,				/* I - Number of command-line args */
+     * Write dirty config/state files...
+     */
+ 
+-    if (DirtyCleanTime && current_time >= DirtyCleanTime && cupsArrayCount(Clients) == 0)
++    if (DirtyCleanTime && current_time >= DirtyCleanTime)
+       cupsdCleanDirty();
+ 
+ #ifdef __APPLE__

SOURCES/cups-etimedout.patch

@@ -0,0 +1,25 @@
+diff --git a/cups/http-addrlist.c b/cups/http-addrlist.c
+index e4ffc3d..a989055 100644
+--- a/cups/http-addrlist.c
++++ b/cups/http-addrlist.c
+@@ -240,7 +240,10 @@ httpAddrConnect2(
+     }
+ 
+     if (!addrlist && nfds == 0)
++    {
++      errno = EHOSTDOWN;
+       break;
++    }
+ 
+    /*
+     * See if we can connect to any of the addresses so far...
+@@ -371,6 +374,9 @@ httpAddrConnect2(
+       remaining -= 250;
+   }
+ 
++  if (remaining <= 0)
++    errno = ETIMEDOUT;
++
+   while (nfds > 0)
+   {
+     nfds --;

SOURCES/cups-failover-backend.patch

@@ -0,0 +1,877 @@
+diff --git a/backend/Makefile b/backend/Makefile
+index 3038682..6642016 100644
+--- a/backend/Makefile
++++ b/backend/Makefile
+@@ -28,6 +28,7 @@ include ../Makedefs
+ RBACKENDS =	\
+ 		ipp \
+ 		lpd \
++		failover \
+ 		$(DNSSD_BACKEND)
+ UBACKENDS =	\
+ 		snmp \
+@@ -51,6 +52,7 @@ LIBOBJS	=	\
+ OBJS	=	\
+ 		ipp.o \
+ 		lpd.o \
++		failover.o \
+ 		dnssd.o \
+ 		snmp.o \
+ 		socket.o \
+@@ -275,6 +277,13 @@ lpd:	lpd.o ../cups/$(LIBCUPS) libbackend.a
+ 	echo Linking $@...
+ 	$(LD_CC) $(LDFLAGS) -o lpd lpd.o libbackend.a $(LIBS)
+ 
++#
++# failover
++#
++
++failover:	failover.o ../cups/$(LIBCUPS) libbackend.a
++	echo Linking $@...
++	$(LD_CC) $(LDFLAGS) -o failover failover.o libbackend.a $(LIBS)
+ 
+ #
+ # snmp
+diff --git a/backend/failover.c b/backend/failover.c
+new file mode 100644
+index 0000000..9affd8f
+--- /dev/null
++++ b/backend/failover.c
+@@ -0,0 +1,837 @@
++/*
++ * Failover Backend for the Common UNIX Printing System (CUPS).
++ *
++ * Copyright (c) 2014, Red Hat, Inc.
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ *   notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ *   notice, this list of conditions and the following disclaimer in the
++ *   documentation and/or other materials provided with the distribution.
++ * * Neither the name of Red Hat, Inc. nor the names of its contributors
++ *   may be used to endorse or promote products derived from this software
++ *   without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT,
++ * INC.  BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ *
++ * Original version by Clark Hale, Red Hat, Inc.
++ *
++ * This backend presents a fake printer that will choose the first
++ * available printer from a list of IPP URIs.
++ *
++ * Option failover contains a comma separated list of IPP URIs.  The
++ * URIs are attempted in-order.
++ *
++ * Option failover-retries contains an integer that indicates how many
++ * times to iterate through the failover list before completely
++ * failing.
++ *
++ * Contents:
++ *   main()                   - Checks each printer in a failover list, and
++ *                              sends job data to the first available printer
++ *   move_job()               - Sends and IPP Move-Job request
++ *   check_printer()          - Checks a printer's attributes to see
++ *                              if it's enabled and accepting jobs
++ *   read_config()            - Read the backends configuration from
++ *                              options
++ *   get_printer_attributes() - Sends an IPP Get-Attributes request to
++ *                              a URI
++ *   sigterm_handler()        - Handle SIGTERM that cancels the job
++ *   password_cb()            - Password call back used to disable password
++ *                              prompt
++ */
++#include <stdlib.h>
++#include <stdio.h>
++#include <string.h>
++#include <sys/wait.h>
++#include <cups/http-private.h>
++#include <cups/http.h>
++#include "backend-private.h"
++
++/*
++ * Return Values
++ */
++typedef enum fo_state_e
++{
++  FO_PRINTER_GOOD = 0,
++  FO_PRINTER_BAD,
++  FO_PRINTER_BUSY,
++  FO_AUTH_REQUIRED
++} fo_state_t;
++
++/*
++ * Constants
++ */
++#define FAILOVER_DEFAULT_RETRIES        (3)
++#define FAILOVER_PASSWORD_RETRIES_MAX   (3)
++
++/*
++ * Local Functions
++ */
++static       int   check_printer(const char *device_uri);
++static       int   read_config(cups_array_t *printer_array, int *retries,
++                               const char *options);
++static       int   get_printer_attributes(const char *device_uri,
++                                          ipp_t **attributes);
++static       int   move_job(int jobid, const char *dest);
++static       void  sigterm_handler(int sig);
++static const char *password_cb(const char *);
++
++/*
++ * Global Variables
++ */
++static int         job_canceled = 0;     /* Job canceled */
++static char       *password = NULL;      /* password for device */
++static int         password_retries = 0;
++static const char *auth_info_required = "none";
++
++/*
++ * 'main()' - Checks each printer in a failover list, and
++ *            sends job data to the first available printer
++ * Usage:
++ *    printer-uri job-id user title copies options [file]
++ *
++ *    The printer-uri option is not used, but it still required to fit
++ *    to the backend(7) standards.
++ */
++int
++main(int argc, char *argv[])
++{
++  const char   *selected_uri = NULL;      /* URI of selected printer     */
++  const char   *tmp_device_uri;           /* Device URI to check         */
++  cups_array_t *printer_array;            /* Array of available printers */
++  int           printer_count = 0;        /* current printer array index */
++  int           retry_max = 1;            /* maximum retries before exit */
++  int           retry_count = 0;          /* current retry number        */
++  int           auth_failed_count = 0;    /* auth failures per loop      */
++  int           rc = CUPS_BACKEND_OK;
++#if defined(HAVE_SIGACTION) && !defined(HAVE_SIGSET)
++  struct        sigaction action;       /* Actions for POSIX signals */
++#endif /* HAVE_SIGACTION && !HAVE_SIGSET */
++
++ /*
++  * Check args
++  */
++  if (argc == 1)
++  {
++   /*
++    * print out discovery data
++    */
++    char *backendName;
++
++    if ((backendName = strrchr(argv[0], '/')) != NULL)
++      backendName++;
++    else
++      backendName = argv[0];
++
++    _cupsLangPrintf(stderr,"network %s \"Unknown\" \"%s (%s)\"\n",
++                    backendName,
++                    _cupsLangString(cupsLangDefault(), _("Failover Printer")),
++                    backendName);
++
++    return (CUPS_BACKEND_OK);
++  }
++  else if (argc < 6)
++  {
++    _cupsLangPrintf(stderr,
++                    _("Usage: %s job-id user title copies options [file]"),
++                    argv[0]);
++    return (CUPS_BACKEND_STOP);
++  }
++
++  fprintf(stderr, "DEBUG: Failover backend starting up.\n");
++
++ /*
++  * Don't buffer status messages
++  */
++  setbuf(stderr, NULL);
++
++ /*
++  * Ignore SIGPIPE and catch SIGTERM signals...
++  */
++#ifdef HAVE_SIGSET
++  sigset(SIGPIPE, SIG_IGN);
++  sigset(SIGTERM, sigterm_handler);
++#elif defined(HAVE_SIGACTION)
++  memset(&action, 0, sizeof(action));
++  action.sa_handler = SIG_IGN;
++  sigaction(SIGPIPE, &action, NULL);
++
++  sigemptyset(&action.sa_mask);
++  sigaddset(&action.sa_mask, SIGTERM);
++  action.sa_handler = sigterm_handler;
++  sigaction(SIGTERM, &action, NULL);
++#else
++  signal(SIGPIPE, SIG_IGN);
++  signal(SIGTERM, sigterm_handler);
++#endif /* HAVE_SIGSET */
++
++  printer_array = cupsArrayNew(NULL, NULL);
++
++ /*
++  * Read Configuration
++  */
++  if ((rc = read_config(printer_array, &retry_max,
++                        argv[5])) != CUPS_BACKEND_OK)
++  {
++    fprintf(stderr, "ERROR: Failed to read configuration options!\n");
++    goto cleanup;
++  }
++
++ /*
++  * Main Retry Loop
++  */
++  for (retry_count = 0; retry_count < retry_max; retry_count++)
++  {
++    fprintf(stderr, "DEBUG: Retry loop #%d\n", retry_count + 1);
++
++   /*
++    * Reset Counters
++    */
++    printer_count = 0;
++    auth_failed_count = 0;
++
++    tmp_device_uri = (char *)cupsArrayFirst(printer_array);
++
++    do
++    {
++      if (job_canceled)
++      {
++        fprintf(stderr, "DEBUG: Job Canceled\n");
++        goto cleanup;
++      }
++
++      fprintf(stderr,"DEBUG: Checking printer #%d: %s\n",
++              printer_count+1, tmp_device_uri);
++
++      rc = check_printer(tmp_device_uri);
++
++      // Printer is available and not busy.
++      if ( rc == FO_PRINTER_GOOD )
++      {
++        selected_uri = tmp_device_uri;
++        break;
++      }
++      // Printer is busy
++      else if (rc == FO_PRINTER_BUSY)
++      {
++        fprintf(stderr, "DEBUG: Waiting for job to complete.\n");
++        sleep(2);
++        continue;
++      }
++      // Authorization is required to access the printer.
++      else if (rc == FO_AUTH_REQUIRED)
++      {
++        auth_failed_count++;
++        fprintf(stderr, "DEBUG: auth_failed_count = %d\n", auth_failed_count);
++      }
++      // Printer is stopped or not accepting jobs
++      else
++      {
++        if (!printer_count)
++          fprintf(stderr, "INFO: Primary Printer, %s, not available.  "
++                  "Attempting Failovers...\n",
++                  tmp_device_uri);
++        else
++          fprintf(stderr, "INFO: Failover Printer, %s, not available.  "
++                  "Attempting Failovers..\n",
++                  tmp_device_uri);
++        printer_count++;
++        tmp_device_uri = (char *)cupsArrayNext(printer_array);
++      }
++    } while (tmp_device_uri != NULL);
++
++    if (selected_uri && !printer_count)
++      fprintf(stderr, "STATE: -primary-printer-failed\n");
++    else
++      fprintf(stderr, "STATE: +primary-printer-failed\n");
++
++    if (job_canceled)
++    {
++      fprintf(stderr, "DEBUG: Job Canceled\n");
++      goto cleanup;
++    }
++
++    if (!selected_uri && auth_failed_count == printer_count)
++    {
++      fprintf(stderr, "ERROR:  All failover printers failed with "
++              "authorization issues.\n");
++      rc = CUPS_BACKEND_AUTH_REQUIRED;
++      fprintf(stderr, "ATTR: auth-info-required=%s\n", auth_info_required);
++      goto cleanup;
++    }
++    else if (!selected_uri && retry_count + 1 < retry_max)
++    {
++      fprintf(stderr, "INFO: No suitable printer found...retrying...\n");
++      sleep(2);
++      continue;
++    }
++    else if (selected_uri)
++    {
++      fprintf(stderr, "DEBUG: Using printer, %s.\n", selected_uri);
++      break;
++    }
++  }
++
++  if (!selected_uri)
++  {
++    fprintf(stderr, "ERROR: No suitable printer found.  Aborting print\n");
++    rc = CUPS_BACKEND_FAILED;
++    goto cleanup;
++  }
++
++  rc = move_job(atoi(argv[1]), selected_uri);
++
++  if (job_canceled)
++    rc = CUPS_BACKEND_OK;
++
++cleanup :
++  if (job_canceled)
++    rc = CUPS_BACKEND_OK;
++
++  tmp_device_uri = (char *)cupsArrayFirst(printer_array);
++  do
++  {
++    free((void *)tmp_device_uri);
++  } while ((tmp_device_uri = (char *)cupsArrayNext(printer_array)) != NULL);
++
++  cupsArrayDelete(printer_array);
++  sleep(2);
++  return (rc);
++}
++
++/*
++ * 'check_printer()' - Checks the status of a remote printer and returns
++ *                     back a good/bad/busy status.
++ */
++int
++check_printer(const char *device_uri)
++{
++  ipp_t           *attributes = NULL;     /* attributes for device_uri */
++  ipp_attribute_t *tmp_attribute;         /* for examining attribs     */
++  int              rc = FO_PRINTER_GOOD;  /* return code               */
++  char            *reason;                /* printer state reason */
++  int              i;
++
++  fprintf(stderr, "DEBUG: Checking printer %s\n",device_uri);
++
++  rc = get_printer_attributes(device_uri, &attributes);
++  if ( rc != CUPS_BACKEND_OK )
++  {
++    fprintf(stderr, "DEBUG: Failed to get attributes from printer: %s\n",
++            device_uri);
++    if ( rc == CUPS_BACKEND_AUTH_REQUIRED )
++      return (FO_AUTH_REQUIRED);
++    else
++      return (FO_PRINTER_BAD);
++  }
++
++ /*
++  * Check if printer is accepting jobs
++  */
++  if ((tmp_attribute = ippFindAttribute(attributes,
++                                        "printer-is-accepting-jobs",
++                                        IPP_TAG_BOOLEAN)) != NULL &&
++      !tmp_attribute->values[0].boolean)
++  {
++    fprintf(stderr,
++            "DEBUG: Printer, %s, is not accepting jobs.\n",
++            device_uri);
++
++    rc = FO_PRINTER_BAD;
++  }
++
++ /*
++  * Check if printer is stopped or busy processing
++  */
++  if ((tmp_attribute = ippFindAttribute(attributes,
++                                        "printer-state",
++                                        IPP_TAG_ENUM)) != NULL)
++  {
++    // Printer Stopped
++    if ( tmp_attribute->values[0].integer == IPP_PRINTER_STOPPED )
++    {
++      fprintf(stderr, "DEBUG: Printer, %s, stopped.\n", device_uri);
++      rc = FO_PRINTER_BAD;
++    }
++    // Printer Busy
++    else if ( tmp_attribute->values[0].integer == IPP_PRINTER_PROCESSING )
++    {
++      fprintf(stderr, "DEBUG: Printer %s is busy.\n", device_uri);
++      rc = FO_PRINTER_BUSY;
++    }
++  }
++
++  /*
++   * Parse through the printer-state-reasons
++   */
++  if ((tmp_attribute = ippFindAttribute(attributes, "printer-state-reasons",
++                                        IPP_TAG_KEYWORD)) != NULL)
++  {
++    for (i = 0; i < tmp_attribute->num_values; i++)
++    {
++      reason = tmp_attribute->values[i].string.text;
++      int len = strlen(reason);
++
++      if (len > 8 && !strcmp(reason + len - 8, "-warning"))
++      {
++        fprintf(stderr, "DEBUG: Printer Supply Warning, %s\n", reason);
++        rc = FO_PRINTER_BAD;
++      }
++      else if (len > 6 && !strcmp(reason + len - 6, "-error"))
++      {
++        fprintf(stderr, "DEBUG: Printer Supply Error, %s\n", reason);
++        rc = FO_PRINTER_BAD;
++      }
++    }
++  }
++
++  return (rc);
++}
++
++/*
++ * 'read_config()' - Parses the failover and failover-retries options
++ *
++ */
++static int
++read_config(cups_array_t *printer_array, int *retries, const char *options)
++{
++
++  const char    *tmp;                   /* temporary ptr                     */
++  char          *tok_tmp;               /* temporary ptr for option  parsing */
++  int            jobopts_count = 0;     /* number of options                 */
++  cups_option_t *jobopts = NULL;        /* job options                       */
++
++
++  fprintf(stderr, "DEBUG: Reading Configuration.\n");
++  jobopts_count = cupsParseOptions(options, 0, &jobopts);
++
++  if (!jobopts_count)
++  {
++    fprintf(stderr,
++            "ERROR: No job options!  Cannot find failover options!\n");
++    return (CUPS_BACKEND_STOP);
++  }
++
++ /*
++  * Get attributes from the primary printer
++  */
++  fprintf(stderr, "DEBUG: Searching for failover option.\n");
++
++  if ((tmp = cupsGetOption("failover", jobopts_count, jobopts)) != NULL)
++  {
++    fprintf(stderr, "DEBUG: Failover option contents: %s.\n", tmp);
++
++    tok_tmp = strdup(tmp);
++
++    tmp = strtok(tok_tmp, ",");
++    do
++    {
++      cupsArrayAdd(printer_array, strdup(tmp));
++    } while ((tmp = strtok(NULL,",")) != NULL);
++
++    free(tok_tmp);
++  }
++  else
++  {
++   /*
++    * The queue is misconfigured, so return back CUPS_BACKEND_STOP
++    */
++    fprintf(stderr, "ERROR: failover option not specified!\n");
++    return (CUPS_BACKEND_STOP);
++  }
++
++ /*
++  * Get the failover-retries value, if it exists.
++  */
++  fprintf(stderr, "DEBUG: Searching for failover-retries option.\n");
++
++  if ((tmp = cupsGetOption("failover-retries",
++                           jobopts_count, jobopts)) != NULL)
++  {
++    fprintf(stderr, "DEBUG: failover-retries option contents: %s.\n", tmp);
++    *retries = atoi(tmp);
++  }
++  else
++  {
++    *retries = FAILOVER_DEFAULT_RETRIES;
++    fprintf(stderr, "DEBUG: Failed to get failover-retries option\n");
++    fprintf(stderr, "DEBUG: Defaulted to %d retries\n", *retries);
++  }
++
++  return (CUPS_BACKEND_OK);
++}
++
++/*
++ * 'get_printer_attributes()' - Sends an IPP Get-Attributes request to
++ *                              a URI
++ */
++int
++get_printer_attributes(const char *device_uri, ipp_t **attributes)
++{
++  char               uri[HTTP_MAX_URI];         /* Updated URI without login */
++  int                version;                   /* IPP version */
++  char               scheme[256];               /* Scheme in URI */
++  ipp_status_t       ipp_status;                /* Status of IPP request */
++  char               hostname[1024];            /* Hostname */
++  char               resource[1024];            /* Resource infoo */
++  char               addrname[256];             /* Address name */
++  int                port;                      /* IPP Port number */
++  char               portname[255];             /* Port as string */
++  http_t            *http;                      /* HTTP connection */
++  ipp_t             *request;                   /* IPP request */
++  int                rc = CUPS_BACKEND_OK;      /* Return Code */
++  char               username[256];             /* Username for device URI */
++  char              *option_ptr;                /* for parsing resource opts */
++  const char * const pattrs[] =                 /* Printer attributes wanted */
++    {
++      "printer-is-accepting-jobs",
++      "printer-state",
++      "printer-state-reasons"
++    };
++
++  if (job_canceled)
++    return (CUPS_BACKEND_OK);
++
++  fprintf(stderr, "DEBUG: Getting Printer Attributes.\n");
++  fprintf(stderr, "DEBUG: Device URL %s.\n", device_uri);
++
++ /*
++  * Parse device_uri
++  */
++  if (httpSeparateURI(HTTP_URI_CODING_ALL, device_uri, scheme, sizeof(scheme),
++                     username, sizeof(username), hostname, sizeof(hostname),
++                     &port, resource, sizeof(resource)) != HTTP_URI_OK)
++  {
++    fprintf(stderr, "ERROR: Problem parsing device_uri, %s\n", device_uri);
++    return (CUPS_BACKEND_STOP);
++  }
++
++  if (!port)
++    port = IPP_PORT;
++
++  sprintf(portname, "%d", port);
++
++  fprintf(stderr, "DEBUG: Getting Printer Attributes.\n");
++
++ /*
++  * Configure password
++  */
++  cupsSetPasswordCB(password_cb);
++
++ /*
++  * reset, in case a previous attempt for
++  * another printer left residue
++  */
++  cupsSetUser(NULL);
++  password = NULL;
++  password_retries = 0;
++
++  if (*username)
++  {
++    if ((password = strchr(username, ':')) != NULL)
++    {
++      *password = '\0';
++      password++;
++    }
++
++    cupsSetUser(username);
++  }
++  else if (!getuid())
++  {
++    const char *username_env;
++
++    if ((username_env = getenv("AUTH_USERNAME")) != NULL)
++    {
++      cupsSetUser(username_env);
++      password = getenv("AUTH_PASSWORD");
++    }
++  }
++
++ /*
++  * Try connecting to the remote server...
++  */
++  fprintf(stderr, "DEBUG: Connecting to %s:%d\n", hostname, port);
++  _cupsLangPuts(stderr, _("INFO: Connecting to printer...\n"));
++
++  http = httpConnectEncrypt(hostname, port, cupsEncryption());
++
++ /*
++  * Deal the socket not being open.
++  */
++  if (!http)
++  {
++    int error = errno;          /* Connection error */
++
++    switch (error)
++    {
++    case EHOSTDOWN :
++      _cupsLangPuts(stderr, _("WARNING: "
++                              "The printer may not exist or "
++                              "is unavailable at this time.\n"));
++      break;
++    case EHOSTUNREACH :
++      _cupsLangPuts(stderr, _("WARNING: "
++                              "The printer is unreachable at this "
++                              "time.\n"));
++      break;
++    case ECONNREFUSED :
++      _cupsLangPuts(stderr, _("WARNING: "
++                              "Connection Refused.\n"));
++      break;
++    default :
++      fprintf(stderr, "DEBUG: Connection error: %s\n", strerror(errno));
++      break;
++    }
++
++    rc = CUPS_BACKEND_FAILED;
++    sleep(5);
++    goto prt_available_cleanup;
++  }
++
++
++#ifdef AF_INET6
++  if (http->hostaddr->addr.sa_family == AF_INET6)
++    fprintf(stderr, "DEBUG: Connected to [%s]:%d (IPv6)...\n",
++            httpAddrString(http->hostaddr, addrname, sizeof(addrname)),
++            ntohs(http->hostaddr->ipv6.sin6_port));
++  else
++#endif /* AF_INET6 */
++  if (http->hostaddr->addr.sa_family == AF_INET)
++    fprintf(stderr, "DEBUG: Connected to %s:%d (IPv4)...\n",
++            httpAddrString(http->hostaddr, addrname, sizeof(addrname)),
++            ntohs(http->hostaddr->ipv4.sin_port));
++
++ /*
++  * Search the resource string for options.
++  * We only care about version, for the moment.
++  */
++  version = 11;
++
++  if ((option_ptr = strchr(resource, '?')) != NULL)
++  {
++    *option_ptr++ = '\0';
++
++    if ((option_ptr = strstr(option_ptr, "version="))!=NULL)
++    {
++      int   minor;       /* minor version from URI */
++      int   major;       /* major version from URI */
++      char *version_str; /* ipp version */
++
++      option_ptr += 8;
++      version_str = option_ptr;
++
++      while (*option_ptr && *option_ptr != '&' && *option_ptr != '+')
++        option_ptr++;
++
++      if (*option_ptr)
++        *option_ptr = '\0';
++
++      sscanf(version_str, "%d.%d", &major, &minor);
++
++      version = (major * 10) + minor;
++
++      switch(version)
++      {
++      case 10 :
++      case 11 :
++      case 20 :
++      case 21 :
++        fprintf(stderr,
++                "DEBUG: Set version to %d from URI\n",
++                version);
++        break;
++      default :
++        _cupsLangPrintf(stderr,
++                        _("DEBUG: Invalid version, %d, from URI.  "
++                          "Using default of 1.1 \n"),
++                        version);
++        version = 11;
++      }
++    }
++  }
++
++
++ /*
++  * Build a URI for the printer.  We can't use the URI in argv[0]
++  * because it might contain username:password information...
++  */
++  if (httpAssembleURI(HTTP_URI_CODING_ALL, uri, sizeof(uri), scheme, NULL,
++                      hostname, port, resource) != HTTP_URI_OK)
++  {
++    fprintf(stderr, "ERROR: Problem assembling printer URI from host %s, "
++            "port %d, resource %s\n", hostname, port, resource);
++    return (CUPS_BACKEND_STOP);
++  }
++
++ /*
++  * Build the IPP request...
++  */
++  request = ippNewRequest(IPP_GET_PRINTER_ATTRIBUTES);
++  request->request.op.version[0] = version / 10;
++  request->request.op.version[1] = version % 10;
++
++  ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri",
++               NULL, uri);
++
++  ippAddStrings(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD,
++                "requested-attributes", sizeof(pattrs) / sizeof(pattrs[0]),
++                NULL, pattrs);
++
++ /*
++  * Do the request...
++  */
++  fputs("DEBUG: Getting supported attributes...\n", stderr);
++
++  fprintf(stderr, "DEBUG: IPP Request Structure Built.\n");
++
++  *attributes = cupsDoRequest(http, request, resource);
++  ipp_status = cupsLastError();
++
++  fprintf(stderr, "DEBUG: Get-Printer-Attributes: %s (%s)\n",
++          ippErrorString(ipp_status), cupsLastErrorString());
++
++  if (ipp_status > IPP_OK_CONFLICT)
++  {
++    fprintf(stderr, "DEBUG: Get-Printer-Attributes returned %s.\n",
++            ippErrorString(ipp_status));
++    switch(ipp_status)
++    {
++    case IPP_FORBIDDEN :
++    case IPP_NOT_AUTHORIZED :
++      _cupsLangPuts(stderr, _("ERROR: Not Authorized.\n"));
++      rc = CUPS_BACKEND_AUTH_REQUIRED;
++      break;
++    case IPP_PRINTER_BUSY :
++    case IPP_SERVICE_UNAVAILABLE :
++      _cupsLangPuts(stderr, _("ERROR: "
++                              "The printer is not responding.\n"));
++      rc = CUPS_BACKEND_FAILED;
++      break;
++    case IPP_BAD_REQUEST :
++    case IPP_VERSION_NOT_SUPPORTED :
++      fprintf(stderr, "ERROR: Destination does not support IPP version %d\n",
++              version);
++    case IPP_NOT_FOUND :
++      _cupsLangPuts(stderr, _("ERROR: "
++                              "The printer configuration is incorrect or the "
++                              "printer no longer exists.\n"));
++      rc = CUPS_BACKEND_STOP;
++      break;
++    default :
++      rc = CUPS_BACKEND_FAILED;
++    }
++    goto prt_available_cleanup;
++  }
++
++prt_available_cleanup :
++  httpClose(http);
++  return (rc);
++}
++
++static int
++move_job(int        jobid,              /* Job ID */
++         const char *dest)              /* Destination ipp address */
++{
++  ipp_t *request;                       /* IPP Request */
++  char  job_uri[HTTP_MAX_URI];          /* job-uri */
++
++  http_t* http = httpConnectEncrypt(cupsServer(), ippPort(), cupsEncryption());
++
++  if (!http)
++  {
++    _cupsLangPrintf(stderr,
++                    _("failover: Unable to connect to server: %s\n"),
++                    strerror(errno));
++    return (CUPS_BACKEND_FAILED);
++  }
++
++ /*
++  * Build a CUPS_MOVE_JOB request, which requires the following
++  * attributes:
++  *
++  *    job-uri/printer-uri
++  *    job-printer-uri
++  *    requesting-user-name
++  */
++
++  request = ippNewRequest(CUPS_MOVE_JOB);
++
++  snprintf(job_uri, sizeof(job_uri), "ipp://localhost/jobs/%d", jobid);
++  ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "job-uri", NULL,
++               job_uri);
++
++  ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_NAME,
++               "requesting-user-name",
++               NULL, cupsUser());
++
++  ippAddString(request, IPP_TAG_JOB, IPP_TAG_URI, "job-printer-uri",
++               NULL, dest);
++
++ /*
++  * Do the request and get back a response...
++  */
++
++  ippDelete(cupsDoRequest(http, request, "/jobs"));
++
++  httpClose(http);
++
++  if (cupsLastError() > IPP_OK_CONFLICT)
++  {
++    _cupsLangPrintf(stderr, "failover: %s\n", cupsLastErrorString());
++    return (CUPS_BACKEND_FAILED);
++  }
++  else
++    return (CUPS_BACKEND_OK);
++}
++
++/*
++ * 'sigterm_handler()' - handles a sigterm, i.e. job canceled
++ */
++static void
++sigterm_handler(int sig)
++{
++  if (!job_canceled)
++  {
++    write(2, "DEBUG: Got SIGTERM.\n", 20);
++    job_canceled = 1;
++  }
++  else
++  {
++   /*
++    * Job has already been canceled, so just exit
++    */
++    exit(1);
++  }
++}
++
++/*
++ * 'password_cb()' - Disable the password prompt for cupsDoFileRequest().
++ */
++static const char *                     /* O - Password  */
++password_cb(const char *prompt)         /* I - Prompt (not used) */
++{
++  auth_info_required = "username,password";
++  password_retries++;
++
++  if(password_retries < FAILOVER_PASSWORD_RETRIES_MAX)
++    return (password);
++  else
++    return (NULL);
++}

SOURCES/cups-fix-preservejob-times.patch

@@ -0,0 +1,110 @@
+diff --git a/scheduler/job.c b/scheduler/job.c
+index 82ef2eb..5d5e3aa 100644
+--- a/scheduler/job.c
++++ b/scheduler/job.c
+@@ -448,10 +448,20 @@ cupsdCleanJobs(void)
+   curtime          = time(NULL);
+   JobHistoryUpdate = 0;
+ 
++  cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCleanJobs: curtime=%d", (int)curtime);
++
+   for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
+        job;
+        job = (cupsd_job_t *)cupsArrayNext(Jobs))
+   {
++    cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCleanJobs: Job %d, state=%d, printer=%p, history_time=%d, file_time=%d", job->id, (int)job->state_value, (void *)job->printer, (int)job->history_time, (int)job->file_time);
++
++    if ((job->history_time && job->history_time < JobHistoryUpdate) || !JobHistoryUpdate)
++      JobHistoryUpdate = job->history_time;
++
++    if ((job->file_time && job->file_time < JobHistoryUpdate) || !JobHistoryUpdate)
++      JobHistoryUpdate = job->file_time;
++
+     if (job->state_value >= IPP_JOB_CANCELED && !job->printer)
+     {
+      /*
+@@ -462,26 +472,14 @@ cupsdCleanJobs(void)
+           (job->history_time && job->history_time <= curtime))
+       {
+         cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing from history.");
+-	cupsdDeleteJob(job, CUPSD_JOB_PURGE);
++        cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+       }
+       else if (job->file_time && job->file_time <= curtime)
+       {
+         cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing document files.");
+-        cupsdLogJob(job, CUPSD_LOG_DEBUG2, "curtime=%ld, job->file_time=%ld", (long)curtime, (long)job->file_time);
+         remove_job_files(job);
+ 
+         cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+-
+-        if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+-	  JobHistoryUpdate = job->history_time;
+-      }
+-      else
+-      {
+-        if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+-	  JobHistoryUpdate = job->history_time;
+-
+-	if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+-	  JobHistoryUpdate = job->file_time;
+       }
+     }
+   }
+@@ -1873,7 +1871,7 @@ cupsdLoadJob(cupsd_job_t *job)		/* I - Job */
+     job->completed_time = attr->values[0].integer;
+ 
+     if (JobHistory < INT_MAX)
+-      job->history_time = attr->values[0].integer + JobHistory;
++      job->history_time = job->completed_time + JobHistory;
+     else
+       job->history_time = INT_MAX;
+ 
+@@ -1884,7 +1882,7 @@ cupsdLoadJob(cupsd_job_t *job)		/* I - Job */
+       JobHistoryUpdate = job->history_time;
+ 
+     if (JobFiles < INT_MAX)
+-      job->file_time = attr->values[0].integer + JobFiles;
++      job->file_time = job->completed_time + JobFiles;
+     else
+       job->file_time = INT_MAX;
+ 
+@@ -3100,8 +3098,10 @@ cupsdUpdateJobs(void)
+       * Update history/file expiration times...
+       */
+ 
++      job->completed_time = attr->values[0].integer;
++
+       if (JobHistory < INT_MAX)
+-	job->history_time = attr->values[0].integer + JobHistory;
++	job->history_time = job->completed_time + JobHistory;
+       else
+ 	job->history_time = INT_MAX;
+ 
+@@ -3115,7 +3115,7 @@ cupsdUpdateJobs(void)
+ 	JobHistoryUpdate = job->history_time;
+ 
+       if (JobFiles < INT_MAX)
+-	job->file_time = attr->values[0].integer + JobFiles;
++	job->file_time = job->completed_time + JobFiles;
+       else
+ 	job->file_time = INT_MAX;
+ 
+@@ -4909,7 +4909,7 @@ set_time(cupsd_job_t *job,		/* I - Job to update */
+     job->completed_time = curtime;
+ 
+     if (JobHistory < INT_MAX && attr)
+-      job->history_time = attr->values[0].integer + JobHistory;
++      job->history_time = job->completed_time + JobHistory;
+     else
+       job->history_time = INT_MAX;
+ 
+@@ -4917,7 +4917,7 @@ set_time(cupsd_job_t *job,		/* I - Job to update */
+       JobHistoryUpdate = job->history_time;
+ 
+     if (JobFiles < INT_MAX && attr)
+-      job->file_time = curtime + JobFiles;
++      job->file_time = job->completed_time + JobFiles;
+     else
+       job->file_time = INT_MAX;
+ 

SOURCES/cups-ippeve-web-support.patch

@@ -0,0 +1,315 @@
+diff --git a/cgi-bin/admin.c b/cgi-bin/admin.c
+index a604a8a..e678f24 100644
+--- a/cgi-bin/admin.c
++++ b/cgi-bin/admin.c
+@@ -974,6 +974,13 @@ do_am_printer(http_t *http,		/* I - HTTP connection */
+ 
+         cgiSetVariable("TEMPLATE_NAME", template);
+       }
++
++     /*
++      * Set DEVICE_URI to the actual device uri, without make and model from
++      * html form.
++      */
++
++      cgiSetVariable("DEVICE_URI", var);
+     }
+   }
+ 
+@@ -1137,6 +1144,8 @@ do_am_printer(http_t *http,		/* I - HTTP connection */
+   else if (!file &&
+            (!cgiGetVariable("PPD_NAME") || cgiGetVariable("SELECT_MAKE")))
+   {
++    int ipp_everywhere = !strncmp(var, "ipp://", 6) || !strncmp(var, "ipps://", 7) || (!strncmp(var, "dnssd://", 8) && (strstr(var, "_ipp._tcp") || strstr(var, "_ipps._tcp")));
++
+     if (modify && !cgiGetVariable("SELECT_MAKE"))
+     {
+      /*
+@@ -1282,9 +1291,8 @@ do_am_printer(http_t *http,		/* I - HTTP connection */
+         cgiStartHTML(title);
+ 	if (!cgiGetVariable("PPD_MAKE"))
+ 	  cgiSetVariable("PPD_MAKE", cgiGetVariable("CURRENT_MAKE"));
+-	if (!modify)
+-	  cgiSetVariable("CURRENT_MAKE_AND_MODEL",
+-	                 cgiGetArray("PPD_MAKE_AND_MODEL", 0));
++        if (ipp_everywhere)
++	  cgiSetVariable("SHOW_IPP_EVERYWHERE", "1");
+ 	cgiCopyTemplateLang("choose-model.tmpl");
+         cgiEndHTML();
+       }
+@@ -4219,6 +4227,11 @@ get_printer_ppd(const char *uri,	/* I - Printer URI */
+ 		host[256],		/* Hostname */
+ 		resource[256];		/* Resource path */
+   int		port;			/* Port number */
++  static const char * const pattrs[] =	/* Printer attributes we need */
++  {
++    "all",
++    "media-col-database"
++  };
+ 
+ 
+  /*
+@@ -4259,6 +4272,7 @@ get_printer_ppd(const char *uri,	/* I - Printer URI */
+ 
+   request = ippNewRequest(IPP_OP_GET_PRINTER_ATTRIBUTES);
+   ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", NULL, uri);
++  ippAddStrings(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes",  (int)(sizeof(pattrs) / sizeof(pattrs[0])), NULL, pattrs);
+   response = cupsDoRequest(http, request, resource);
+ 
+   if (!_ppdCreateFromIPP(buffer, bufsize, response))
+diff --git a/cups/ppd-cache.c b/cups/ppd-cache.c
+index e5f89ee..b8139c8 100644
+--- a/cups/ppd-cache.c
++++ b/cups/ppd-cache.c
+@@ -3089,8 +3089,8 @@ _ppdCreateFromIPP(char   *buffer,	/* I - Filename buffer */
+   cupsFilePrintf(fp, "*Manufacturer: \"%s\"\n", make);
+   cupsFilePrintf(fp, "*ModelName: \"%s\"\n", model);
+   cupsFilePrintf(fp, "*Product: \"(%s)\"\n", model);
+-  cupsFilePrintf(fp, "*NickName: \"%s\"\n", model);
+-  cupsFilePrintf(fp, "*ShortNickName: \"%s\"\n", model);
++  cupsFilePrintf(fp, "*NickName: \"%s - IPP Everywhere\"\n", model);
++  cupsFilePrintf(fp, "*ShortNickName: \"%s - IPP Everywhere\"\n", model);
+ 
+   if ((attr = ippFindAttribute(response, "color-supported", IPP_TAG_BOOLEAN)) != NULL && ippGetBoolean(attr, 0))
+     cupsFilePuts(fp, "*ColorDevice: True\n");
+diff --git a/scheduler/ipp.c b/scheduler/ipp.c
+index 5e9a985..4ed3c39 100644
+--- a/scheduler/ipp.c
++++ b/scheduler/ipp.c
+@@ -5829,6 +5829,12 @@ create_local_bg_thread(
+   ipp_t		*request,		/* Request to printer */
+ 		*response;		/* Response from printer */
+   ipp_attribute_t *attr;		/* Attribute in response */
++  ipp_status_t	status;			/* Status code */
++  static const char * const pattrs[] =	/* Printer attributes we need */
++  {
++    "all",
++    "media-col-database"
++  };
+ 
+ 
+  /*
+@@ -5861,12 +5867,35 @@ create_local_bg_thread(
+   cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: Connected to %s:%d, sending Get-Printer-Attributes request...", printer->name, host, port);
+ 
+   request = ippNewRequest(IPP_OP_GET_PRINTER_ATTRIBUTES);
++  ippSetVersion(request, 2, 0);
+   ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", NULL, printer->device_uri);
+-  ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes", NULL, "all");
++  ippAddStrings(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes", (int)(sizeof(pattrs) / sizeof(pattrs[0])), NULL, pattrs);
+ 
+   response = cupsDoRequest(http, request, resource);
++  status   = cupsLastError();
++
++  cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: Get-Printer-Attributes returned %s (%s)", printer->name, ippErrorString(cupsLastError()), cupsLastErrorString());
++
++  if (status == IPP_STATUS_ERROR_BAD_REQUEST || status == IPP_STATUS_ERROR_VERSION_NOT_SUPPORTED)
++  {
++   /*
++    * Try request using IPP/1.1, in case we are talking to an old CUPS server or
++    * printer...
++    */
+ 
+-  cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: Get-Printer-Attributes returned %s", printer->name, ippErrorString(cupsLastError()));
++    ippDelete(response);
++
++    cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: Re-sending Get-Printer-Attributes request using IPP/1.1...", printer->name);
++
++    request = ippNewRequest(IPP_OP_GET_PRINTER_ATTRIBUTES);
++    ippSetVersion(request, 1, 1);
++    ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", NULL, printer->device_uri);
++    ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes", NULL, "all");
++
++    response = cupsDoRequest(http, request, resource);
++
++    cupsdLogMessage(CUPSD_LOG_DEBUG, "%s: IPP/1.1 Get-Printer-Attributes returned %s (%s)", printer->name, ippErrorString(cupsLastError()), cupsLastErrorString());
++  }
+ 
+   // TODO: Grab printer icon file...
+   httpClose(http);
+@@ -5877,6 +5906,8 @@ create_local_bg_thread(
+ 
+   if (_ppdCreateFromIPP(fromppd, sizeof(fromppd), response))
+   {
++    _cupsRWLockWrite(&printer->lock);
++
+     if ((!printer->info || !*(printer->info)) && (attr = ippFindAttribute(response, "printer-info", IPP_TAG_TEXT)) != NULL)
+       cupsdSetString(&printer->info, ippGetString(attr, 0, NULL));
+ 
+@@ -5886,6 +5917,8 @@ create_local_bg_thread(
+     if ((!printer->geo_location || !*(printer->geo_location)) && (attr = ippFindAttribute(response, "printer-geo-location", IPP_TAG_URI)) != NULL)
+       cupsdSetString(&printer->geo_location, ippGetString(attr, 0, NULL));
+ 
++    _cupsRWUnlock(&printer->lock);
++
+     if ((from = cupsFileOpen(fromppd, "r")) == NULL)
+     {
+       cupsdLogMessage(CUPSD_LOG_ERROR, "%s: Unable to read generated PPD: %s", printer->name, strerror(errno));
+diff --git a/systemv/lpadmin.c b/systemv/lpadmin.c
+index bb53565..f3510ca 100644
+--- a/systemv/lpadmin.c
++++ b/systemv/lpadmin.c
+@@ -33,7 +33,7 @@ static int		delete_printer_from_class(http_t *http, char *printer,
+ static int		delete_printer_option(http_t *http, char *printer,
+ 			                      char *option);
+ static int		enable_printer(http_t *http, char *printer);
+-static char		*get_printer_ppd(const char *uri, char *buffer, size_t bufsize);
++static char		*get_printer_ppd(const char *uri, char *buffer, size_t bufsize, int *num_options, cups_option_t **options);
+ static cups_ptype_t	get_printer_type(http_t *http, char *printer, char *uri,
+ 			                 size_t urisize);
+ static int		set_printer_options(http_t *http, char *printer,
+@@ -593,7 +593,7 @@ main(int  argc,			/* I - Number of command-line arguments */
+ 
+   if ((ppd_name = cupsGetOption("ppd-name", num_options, options)) != NULL && !strcmp(ppd_name, "everywhere") && (device_uri = cupsGetOption("device-uri", num_options, options)) != NULL)
+   {
+-    if ((file = get_printer_ppd(device_uri, evefile, sizeof(evefile))) == NULL)
++    if ((file = get_printer_ppd(device_uri, evefile, sizeof(evefile), &num_options, &options)) == NULL)
+       return (1);
+ 
+     num_options = cupsRemoveOption("ppd-name", num_options, &options);
+@@ -1144,20 +1144,29 @@ enable_printer(http_t *http,		/* I - Server connection */
+  * 'get_printer_ppd()' - Get an IPP Everywhere PPD file for the given URI.
+  */
+ 
+-static char *				/* O - Filename or NULL */
+-get_printer_ppd(const char *uri,	/* I - Printer URI */
+-                char       *buffer,	/* I - Filename buffer */
+-		size_t     bufsize)	/* I - Size of filename buffer */
++static char *				/* O  - Filename or NULL */
++get_printer_ppd(
++    const char    *uri,			/* I  - Printer URI */
++    char          *buffer,		/* I  - Filename buffer */
++    size_t        bufsize,		/* I  - Size of filename buffer */
++    int           *num_options,		/* IO - Number of options */
++    cups_option_t **options)		/* IO - Options */
+ {
+   http_t	*http;			/* Connection to printer */
+   ipp_t		*request,		/* Get-Printer-Attributes request */
+ 		*response;		/* Get-Printer-Attributes response */
++  ipp_attribute_t *attr;		/* Attribute from response */
+   char		resolved[1024],		/* Resolved URI */
+ 		scheme[32],		/* URI scheme */
+ 		userpass[256],		/* Username:password */
+ 		host[256],		/* Hostname */
+ 		resource[256];		/* Resource path */
+   int		port;			/* Port number */
++  static const char * const pattrs[] =	/* Attributes to use */
++  {
++    "all",
++    "media-col-database"
++  };
+ 
+ 
+  /*
+@@ -1198,9 +1207,26 @@ get_printer_ppd(const char *uri,	/* I - Printer URI */
+ 
+   request = ippNewRequest(IPP_OP_GET_PRINTER_ATTRIBUTES);
+   ippAddString(request, IPP_TAG_OPERATION, IPP_TAG_URI, "printer-uri", NULL, uri);
++  ippAddStrings(request, IPP_TAG_OPERATION, IPP_TAG_KEYWORD, "requested-attributes", sizeof(pattrs) / sizeof(pattrs[0]), NULL, pattrs);
+   response = cupsDoRequest(http, request, resource);
+ 
+-  if (!_ppdCreateFromIPP(buffer, bufsize, response))
++  if (cupsLastError() >= IPP_STATUS_REDIRECTION_OTHER_SITE)
++  {
++    _cupsLangPrintf(stderr, _("%s: Unable to query printer: %s"), "lpadmin", cupsLastErrorString());
++    buffer[0] = '\0';
++  }
++  else if (_ppdCreateFromIPP(buffer, bufsize, response))
++  {
++    if (!cupsGetOption("printer-geo-location", *num_options, *options) && (attr = ippFindAttribute(response, "printer-geo-location", IPP_TAG_URI)) != NULL)
++      *num_options = cupsAddOption("printer-geo-location", ippGetString(attr, 0, NULL), *num_options, options);
++
++    if (!cupsGetOption("printer-info", *num_options, *options) && (attr = ippFindAttribute(response, "printer-info", IPP_TAG_TEXT)) != NULL)
++      *num_options = cupsAddOption("printer-info", ippGetString(attr, 0, NULL), *num_options, options);
++
++    if (!cupsGetOption("printer-location", *num_options, *options) && (attr = ippFindAttribute(response, "printer-location", IPP_TAG_TEXT)) != NULL)
++      *num_options = cupsAddOption("printer-location", ippGetString(attr, 0, NULL), *num_options, options);
++  }
++  else
+     _cupsLangPrintf(stderr, _("%s: Unable to create PPD file: %s"), "lpadmin", strerror(errno));
+ 
+   ippDelete(response);
+diff --git a/templates/choose-model.tmpl b/templates/choose-model.tmpl
+index ee9338c..9c9b71f 100644
+--- a/templates/choose-model.tmpl
++++ b/templates/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Current Driver - {current_make_and_model}</OPTION>:}
++{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/de/choose-model.tmpl b/templates/de/choose-model.tmpl
+index cb9b6f3..c73ccb2 100644
+--- a/templates/de/choose-model.tmpl
++++ b/templates/de/choose-model.tmpl
+@@ -39,6 +39,7 @@ Drucker {?printer_is_shared=?nicht:{?printer_is_shared=0?nicht:}} im Netzwerk fr
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Aktueller Treiber - {current_make_and_model}</OPTION>:}
++{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/es/choose-model.tmpl b/templates/es/choose-model.tmpl
+index 8a5a4ba..b5624f2 100644
+--- a/templates/es/choose-model.tmpl
++++ b/templates/es/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Controlador actual - {current_make_and_model}</OPTION>:}
++{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/fr/choose-model.tmpl b/templates/fr/choose-model.tmpl
+index a4e771c..07cf93c 100644
+--- a/templates/fr/choose-model.tmpl
++++ b/templates/fr/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Pilote courant - {current_make_and_model}</OPTION>:}
++{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/ja/choose-model.tmpl b/templates/ja/choose-model.tmpl
+index daf1375..6a6e4e4 100644
+--- a/templates/ja/choose-model.tmpl
++++ b/templates/ja/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>現在のドライバー - {current_make_and_model}</OPTION>:}
++{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/pt_BR/choose-model.tmpl b/templates/pt_BR/choose-model.tmpl
+index 55d8bd8..0ed6a3c 100644
+--- a/templates/pt_BR/choose-model.tmpl
++++ b/templates/pt_BR/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Driver atual - {current_make_and_model}</OPTION>:}
++{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>
+diff --git a/templates/ru/choose-model.tmpl b/templates/ru/choose-model.tmpl
+index 2f0d6d9..dedbd49 100644
+--- a/templates/ru/choose-model.tmpl
++++ b/templates/ru/choose-model.tmpl
+@@ -39,6 +39,7 @@
+ <TD>
+ <SELECT NAME="PPD_NAME" SIZE="10">
+ {op=add-printer?:<OPTION VALUE="__no_change__" SELECTED>Текущий драйвер - {current_make_and_model}</OPTION>:}
++{show_ipp_everywhere?<OPTION VALUE="everywhere" SELECTED>{current_make_and_model?{current_make_and_model} -:} IPP Everywhere &trade;</OPTION>:}
+ {[ppd_name]<OPTION VALUE="{ppd_name}" {op=modify-printer?:{?current_make_and_model={ppd_make_and_model}?SELECTED:}}>{ppd_make_and_model} ({ppd_natural_language})
+ }</SELECT>
+ </TD>

SOURCES/cups-kerberos.patch

@@ -0,0 +1,23 @@
+diff --git a/backend/ipp.c b/backend/ipp.c
+index f8bf7e1..8440d2f 100644
+--- a/backend/ipp.c
++++ b/backend/ipp.c
+@@ -422,8 +422,7 @@ main(int  argc,				/* I - Number of command-line args */
+   * that way.
+   */
+ 
+-  if (!getuid() && (value = getenv("AUTH_UID")) != NULL &&
+-      !getenv("AUTH_PASSWORD"))
++  if (!getuid() && (value = getenv("AUTH_UID")) != NULL)
+   {
+     uid_t	uid = (uid_t)atoi(value);
+ 					/* User ID */
+@@ -457,7 +456,7 @@ main(int  argc,				/* I - Number of command-line args */
+ 
+ #  else /* No XPC, just try to run as the user ID */
+     if (uid > 0)
+-      seteuid(uid);
++      setuid(uid);
+ #  endif /* HAVE_XPC */
+   }
+ #endif /* HAVE_GSSAPI */

SOURCES/cups-logs.patch

@@ -0,0 +1,100 @@
+diff --git a/scheduler/log.c b/scheduler/log.c
+index 33cdac6..d66bbf9 100644
+--- a/scheduler/log.c
++++ b/scheduler/log.c
+@@ -597,51 +597,6 @@ cupsdLogJob(cupsd_job_t *job,		/* I - Job */
+   if (level > LogLevel && LogDebugHistory <= 0)
+     return (1);
+ 
+-#ifdef HAVE_SYSTEMD_SD_JOURNAL_H
+-  if (!strcmp(ErrorLog, "syslog"))
+-  {
+-    cupsd_printer_t *printer = job ? (job->printer ? job->printer : (job->dest ? cupsdFindDest(job->dest) : NULL)) : NULL;
+-    static const char * const job_states[] =
+-    {					/* job-state strings */
+-      "Pending",
+-      "PendingHeld",
+-      "Processing",
+-      "ProcessingStopped",
+-      "Canceled",
+-      "Aborted",
+-      "Completed"
+-    };
+-
+-    va_start(ap, message);
+-
+-    do
+-    {
+-      va_copy(ap2, ap);
+-      status = format_log_line(message, ap2);
+-      va_end(ap2);
+-    }
+-    while (status == 0);
+-
+-    va_end(ap);
+-
+-    if (job)
+-      sd_journal_send("MESSAGE=%s", log_line,
+-		      "PRIORITY=%i", log_levels[level],
+-		      PWG_Event"=JobStateChanged",
+-		      PWG_ServiceURI"=%s", printer ? printer->uri : "",
+-		      PWG_JobID"=%d", job->id,
+-		      PWG_JobState"=%s", job->state_value < IPP_JSTATE_PENDING ? "" : job_states[job->state_value - IPP_JSTATE_PENDING],
+-		      PWG_JobImpressionsCompleted"=%d", ippGetInteger(job->impressions, 0),
+-		      NULL);
+-    else
+-      sd_journal_send("MESSAGE=%s", log_line,
+-		      "PRIORITY=%i", log_levels[level],
+-		      NULL);
+-
+-    return (1);
+-  }
+-#endif /* HAVE_SYSTEMD_SD_JOURNAL_H */
+-
+  /*
+   * Format and write the log message...
+   */
+@@ -705,7 +660,43 @@ cupsdLogJob(cupsd_job_t *job,		/* I - Job */
+       return (1);
+     }
+     else if (level <= LogLevel)
++    {
++#ifdef HAVE_SYSTEMD_SD_JOURNAL_H
++      if (!strcmp(ErrorLog, "syslog"))
++      {
++	cupsd_printer_t *printer = job ? (job->printer ? job->printer : (job->dest ? cupsdFindDest(job->dest) : NULL)) : NULL;
++	static const char * const job_states[] =
++	{					/* job-state strings */
++	  "Pending",
++	  "PendingHeld",
++	  "Processing",
++	  "ProcessingStopped",
++	  "Canceled",
++	  "Aborted",
++	  "Completed"
++	};
++
++	if (job)
++	  sd_journal_send("MESSAGE=%s", log_line,
++			  "PRIORITY=%i", log_levels[level],
++			  PWG_Event"=JobStateChanged",
++			  PWG_ServiceURI"=%s", printer ? printer->uri : "",
++			  PWG_JobID"=%d", job->id,
++			  PWG_JobState"=%s", job->state_value < IPP_JSTATE_PENDING ? "" : job_states[job->state_value - IPP_JSTATE_PENDING],
++			  PWG_JobImpressionsCompleted"=%d", ippGetInteger(job->impressions, 0),
++			  NULL);
++	else
++	  sd_journal_send("MESSAGE=%s", log_line,
++			  "PRIORITY=%i", log_levels[level],
++			  NULL);
++
++	return (1);
++      }
++      else
++#endif /* HAVE_SYSTEMD_SD_JOURNAL_H */
++
+       return (cupsdWriteErrorLog(level, log_line));
++    }
+     else
+       return (1);
+   }

SOURCES/cups-memory-consumption.patch

@@ -401,7 +401,7 @@ index 464c09a..cb67468 100644
  	}
        }
 diff --git a/cups/ppd.c b/cups/ppd.c
-index 8276988..db849ac 100644
+index 8276988..6782a85 100644
 --- a/cups/ppd.c
 +++ b/cups/ppd.c
 @@ -34,8 +34,6 @@
@@ -571,7 +571,7 @@ index 8276988..db849ac 100644
   /*
    * Allocate memory for the PPD file record...
    */
-@@ -651,8 +628,8 @@ _ppdOpen(
+@@ -651,12 +628,15 @@ _ppdOpen(
    {
      pg->ppd_status = PPD_ALLOC_ERROR;
  
@@ -582,7 +582,14 @@ index 8276988..db849ac 100644
  
      return (NULL);
    }
-@@ -735,6 +712,8 @@ _ppdOpen(
+ 
++  free(string);
++  string = NULL;
++
+   ppd->language_level = 2;
+   ppd->color_device   = 0;
+   ppd->colorspace     = PPD_CS_N;
+@@ -735,6 +715,8 @@ _ppdOpen(
  	   strncmp(ll, keyword, ll_len)))
        {
  	DEBUG_printf(("2_ppdOpen: Ignoring localization: \"%s\"\n", keyword));
@@ -591,7 +598,7 @@ index 8276988..db849ac 100644
  	continue;
        }
        else if (localization == _PPD_LOCALIZATION_ICC_PROFILES)
-@@ -754,6 +733,8 @@ _ppdOpen(
+@@ -754,6 +736,8 @@ _ppdOpen(
  	if (i >= (int)(sizeof(color_keywords) / sizeof(color_keywords[0])))
  	{
  	  DEBUG_printf(("2_ppdOpen: Ignoring localization: \"%s\"\n", keyword));
@@ -600,7 +607,7 @@ index 8276988..db849ac 100644
  	  continue;
  	}
        }
-@@ -849,7 +830,7 @@ _ppdOpen(
+@@ -849,7 +833,7 @@ _ppdOpen(
        * Say all PPD files are UTF-8, since we convert to UTF-8...
        */
  
@@ -609,7 +616,7 @@ index 8276988..db849ac 100644
        encoding           = _ppdGetEncoding(string);
      }
      else if (!strcmp(keyword, "LanguageVersion"))
-@@ -870,10 +851,10 @@ _ppdOpen(
+@@ -870,10 +854,10 @@ _ppdOpen(
  
  
          cupsCharsetToUTF8(utf8, string, sizeof(utf8), encoding);
@@ -622,7 +629,7 @@ index 8276988..db849ac 100644
      }
      else if (!strcmp(keyword, "Product"))
        ppd->product = string;
-@@ -883,17 +864,17 @@ _ppdOpen(
+@@ -883,17 +867,17 @@ _ppdOpen(
        ppd->ttrasterizer = string;
      else if (!strcmp(keyword, "JCLBegin"))
      {
@@ -643,7 +650,7 @@ index 8276988..db849ac 100644
        ppd_decode(ppd->jcl_ps);		/* Decode quoted string */
      }
      else if (!strcmp(keyword, "AccurateScreensSupport"))
-@@ -961,10 +942,10 @@ _ppdOpen(
+@@ -961,10 +945,10 @@ _ppdOpen(
        ppd->num_filters ++;
  
       /*
@@ -656,7 +663,7 @@ index 8276988..db849ac 100644
      }
      else if (!strcmp(keyword, "Throughput"))
        ppd->throughput = atoi(string);
-@@ -987,7 +968,7 @@ _ppdOpen(
+@@ -987,7 +971,7 @@ _ppdOpen(
        }
  
        ppd->fonts                 = tempfonts;
@@ -665,7 +672,7 @@ index 8276988..db849ac 100644
        ppd->num_fonts ++;
      }
      else if (!strncmp(keyword, "ParamCustom", 11))
-@@ -1152,7 +1133,7 @@ _ppdOpen(
+@@ -1152,7 +1136,7 @@ _ppdOpen(
  	strlcpy(choice->text, text[0] ? text : _("Custom"),
  		sizeof(choice->text));
  
@@ -674,13 +681,12 @@ index 8276988..db849ac 100644
  
  	if (custom_option->section == PPD_ORDER_JCL)
  	  ppd_decode(choice->code);
-@@ -1201,59 +1182,23 @@ _ppdOpen(
+@@ -1201,59 +1185,23 @@ _ppdOpen(
        else if (!strcmp(string, "Plus90"))
          ppd->landscape = 90;
      }
 -    else if (!strcmp(keyword, "Emulators") && string)
-+    else if (!strcmp(keyword, "Emulators") && string && ppd->num_emulations == 0)
+-    {
-     {
 -      for (count = 1, sptr = string; sptr != NULL;)
 -        if ((sptr = strchr(sptr, ' ')) != NULL)
 -	{
@@ -712,7 +718,8 @@ index 8276988..db849ac 100644
 -      }
 -    }
 -    else if (!strncmp(keyword, "StartEmulator_", 14))
--    {
++    else if (!strcmp(keyword, "Emulators") && string && ppd->num_emulations == 0)
+     {
 -      ppd_decode(string);
 +     /*
 +      * Issue #5562: Samsung printer drivers incorrectly use Emulators keyword
@@ -748,7 +755,7 @@ index 8276988..db849ac 100644
      }
      else if (!strcmp(keyword, "JobPatchFile"))
      {
-@@ -1408,7 +1353,7 @@ _ppdOpen(
+@@ -1408,7 +1356,7 @@ _ppdOpen(
  
        option->section = PPD_ORDER_ANY;
  
@@ -757,7 +764,7 @@ index 8276988..db849ac 100644
        string = NULL;
  
       /*
-@@ -1436,7 +1381,7 @@ _ppdOpen(
+@@ -1436,7 +1384,7 @@ _ppdOpen(
  	strlcpy(choice->text,
  	        custom_attr->text[0] ? custom_attr->text : _("Custom"),
  		sizeof(choice->text));
@@ -766,7 +773,7 @@ index 8276988..db849ac 100644
        }
      }
      else if (!strcmp(keyword, "JCLOpenUI"))
-@@ -1515,7 +1460,7 @@ _ppdOpen(
+@@ -1515,7 +1463,7 @@ _ppdOpen(
        option->section = PPD_ORDER_JCL;
        group = NULL;
  
@@ -775,7 +782,7 @@ index 8276988..db849ac 100644
        string = NULL;
  
       /*
-@@ -1539,14 +1484,14 @@ _ppdOpen(
+@@ -1539,14 +1487,14 @@ _ppdOpen(
  	strlcpy(choice->text,
  	        custom_attr->text[0] ? custom_attr->text : _("Custom"),
  		sizeof(choice->text));
@@ -792,7 +799,7 @@ index 8276988..db849ac 100644
        string = NULL;
      }
      else if (!strcmp(keyword, "OpenGroup"))
-@@ -1593,14 +1538,14 @@ _ppdOpen(
+@@ -1593,14 +1541,14 @@ _ppdOpen(
        if (group == NULL)
  	goto error;
  
@@ -809,7 +816,7 @@ index 8276988..db849ac 100644
        string = NULL;
      }
      else if (!strcmp(keyword, "OrderDependency"))
-@@ -1658,7 +1603,7 @@ _ppdOpen(
+@@ -1658,7 +1606,7 @@ _ppdOpen(
  	option->order   = order;
        }
  
@@ -818,7 +825,7 @@ index 8276988..db849ac 100644
        string = NULL;
      }
      else if (!strncmp(keyword, "Default", 7))
-@@ -1901,7 +1846,7 @@ _ppdOpen(
+@@ -1901,7 +1849,7 @@ _ppdOpen(
        * Don't add this one as an attribute...
        */
  
@@ -827,7 +834,7 @@ index 8276988..db849ac 100644
        string = NULL;
      }
      else if (!strcmp(keyword, "PaperDimension"))
-@@ -1923,7 +1868,7 @@ _ppdOpen(
+@@ -1923,7 +1871,7 @@ _ppdOpen(
        size->width  = (float)_cupsStrScand(string, &sptr, loc);
        size->length = (float)_cupsStrScand(sptr, NULL, loc);
  
@@ -836,7 +843,7 @@ index 8276988..db849ac 100644
        string = NULL;
      }
      else if (!strcmp(keyword, "ImageableArea"))
-@@ -1947,7 +1892,7 @@ _ppdOpen(
+@@ -1947,7 +1895,7 @@ _ppdOpen(
        size->right  = (float)_cupsStrScand(sptr, &sptr, loc);
        size->top    = (float)_cupsStrScand(sptr, NULL, loc);
  
@@ -845,7 +852,7 @@ index 8276988..db849ac 100644
        string = NULL;
      }
      else if (option != NULL &&
-@@ -2003,7 +1948,7 @@ _ppdOpen(
+@@ -2003,7 +1951,7 @@ _ppdOpen(
          (mask & (PPD_KEYWORD | PPD_STRING)) == (PPD_KEYWORD | PPD_STRING))
        ppd_add_attr(ppd, keyword, name, text, string);
      else
@@ -854,7 +861,7 @@ index 8276988..db849ac 100644
    }
  
   /*
-@@ -2016,7 +1961,8 @@ _ppdOpen(
+@@ -2016,7 +1964,8 @@ _ppdOpen(
      goto error;
    }
  
@@ -864,7 +871,7 @@ index 8276988..db849ac 100644
  
   /*
    * Reset language preferences...
-@@ -2098,8 +2044,8 @@ _ppdOpen(
+@@ -2098,8 +2047,8 @@ _ppdOpen(
  
    error:
  
@@ -875,7 +882,7 @@ index 8276988..db849ac 100644
  
    ppdClose(ppd);
  
-@@ -2537,9 +2483,9 @@ ppd_free_filters(ppd_file_t *ppd)	/* I - PPD file */
+@@ -2537,9 +2486,9 @@ ppd_free_filters(ppd_file_t *ppd)	/* I - PPD file */
    if (ppd->num_filters > 0)
    {
      for (i = ppd->num_filters, filter = ppd->filters; i > 0; i --, filter ++)
@@ -887,7 +894,7 @@ index 8276988..db849ac 100644
  
      ppd->num_filters = 0;
      ppd->filters     = NULL;
-@@ -2566,7 +2512,7 @@ ppd_free_group(ppd_group_t *group)	/* I - Group to free */
+@@ -2566,7 +2515,7 @@ ppd_free_group(ppd_group_t *group)	/* I - Group to free */
  	 i --, option ++)
        ppd_free_option(option);
  
@@ -896,7 +903,7 @@ index 8276988..db849ac 100644
    }
  
    if (group->num_subgroups > 0)
-@@ -2576,7 +2522,7 @@ ppd_free_group(ppd_group_t *group)	/* I - Group to free */
+@@ -2576,7 +2525,7 @@ ppd_free_group(ppd_group_t *group)	/* I - Group to free */
  	 i --, subgroup ++)
        ppd_free_group(subgroup);
  
@@ -905,7 +912,7 @@ index 8276988..db849ac 100644
    }
  }
  
-@@ -2598,10 +2544,10 @@ ppd_free_option(ppd_option_t *option)	/* I - Option to free */
+@@ -2598,10 +2547,10 @@ ppd_free_option(ppd_option_t *option)	/* I - Option to free */
           i > 0;
           i --, choice ++)
      {
@@ -918,7 +925,7 @@ index 8276988..db849ac 100644
    }
  }
  
-@@ -3338,7 +3284,7 @@ ppd_read(cups_file_t    *fp,		/* I - File to read from */
+@@ -3338,7 +3287,7 @@ ppd_read(cups_file_t    *fp,		/* I - File to read from */
  	lineptr ++;
        }
  
@@ -927,7 +934,7 @@ index 8276988..db849ac 100644
  
        mask |= PPD_STRING;
      }
-@@ -3460,7 +3406,7 @@ ppd_update_filters(ppd_file_t     *ppd,	/* I - PPD file */
+@@ -3460,7 +3409,7 @@ ppd_update_filters(ppd_file_t     *ppd,	/* I - PPD file */
      filter           += ppd->num_filters;
      ppd->num_filters ++;
  

SOURCES/cups-ppdopen-heap-overflow.patch

@@ -0,0 +1,42 @@
+diff --git a/cups/ppd.c b/cups/ppd.c
+index ff52df2e..199cf034 100644
+--- a/cups/ppd.c
++++ b/cups/ppd.c
+@@ -1719,8 +1719,7 @@ _ppdOpen(
+                      constraint->choice1, constraint->option2,
+ 		     constraint->choice2))
+       {
+-        case 0 : /* Error */
+-	case 1 : /* Error */
++        default : /* Error */
+ 	    pg->ppd_status = PPD_BAD_UI_CONSTRAINTS;
+ 	    goto error;
+ 
+diff --git a/ppdc/ppdc-source.cxx b/ppdc/ppdc-source.cxx
+index c25d4966..236c00db 100644
+--- a/ppdc/ppdc-source.cxx
++++ b/ppdc/ppdc-source.cxx
+@@ -1743,15 +1743,17 @@ ppdcSource::get_resolution(ppdcFile *fp)// I - File to read
+ 
+   switch (sscanf(name, "%dx%d", &xdpi, &ydpi))
+   {
+-    case 0 :
+-        _cupsLangPrintf(stderr,
+-	                _("ppdc: Bad resolution name \"%s\" on line %d of "
+-			  "%s."), name, fp->line, fp->filename);
+-        break;
+     case 1 :
+         ydpi = xdpi;
+ 	break;
+-  }
++    case 2 :
++        break;
++    default :
++        _cupsLangPrintf(stderr,
++                  _("ppdc: Bad resolution name \"%s\" on line %d of "
++        "%s."), name, fp->line, fp->filename);
++        break;
++}
+ 
+   // Create the necessary PS commands...
+   snprintf(command, sizeof(command),

SOURCES/cups-preservejob-leak.patch

@@ -0,0 +1,31 @@
+diff --git a/scheduler/colorman.c b/scheduler/colorman.c
+index 8af4e5c..9bfdb0c 100644
+--- a/scheduler/colorman.c
++++ b/scheduler/colorman.c
+@@ -1083,7 +1083,7 @@ colord_create_profile(
+ 
+   dbus_message_iter_get_basic(&args, &profile_path);
+   cupsdLogMessage(CUPSD_LOG_DEBUG, "Created profile \"%s\".", profile_path);
+-  cupsArrayAdd(profiles, strdup(profile_path));
++  cupsArrayAdd(profiles, profile_path);
+ 
+ out:
+ 
+diff --git a/scheduler/job.c b/scheduler/job.c
+index 0223bee..47d4c72 100644
+--- a/scheduler/job.c
++++ b/scheduler/job.c
+@@ -1496,11 +1496,11 @@ cupsdDeleteJob(cupsd_job_t       *job,	/* I - Job */
+     job->num_files = 0;
+   }
+ 
++  unload_job(job);
++
+   if (job->history)
+     free_job_history(job);
+ 
+-  unload_job(job);
+-
+   cupsArrayRemove(Jobs, job);
+   cupsArrayRemove(ActiveJobs, job);
+   cupsArrayRemove(PrintingJobs, job);

SOURCES/cups-rastertoepson-crash.patch

@@ -0,0 +1,13 @@
+diff --git a/filter/rastertoepson.c b/filter/rastertoepson.c
+index 4efe669..e8fe0c6 100644
+--- a/filter/rastertoepson.c
++++ b/filter/rastertoepson.c
+@@ -307,7 +307,7 @@ StartPage(
+ 
+   if (DotBytes)
+   {
+-    if ((LineBuffers[0] = calloc((size_t)DotBytes, header->cupsWidth * (size_t)(Shingling + 1))) == NULL)
++    if ((LineBuffers[0] = calloc((size_t)DotBytes, (header->cupsWidth + 7) * (size_t)(Shingling + 1))) == NULL)
+     {
+       fputs("ERROR: Unable to allocate memory\n", stderr);
+       exit(1);

SOURCES/cups-require-cups-socket.patch

@@ -0,0 +1,12 @@
+diff --git a/scheduler/org.cups.cupsd.service.in b/scheduler/org.cups.cupsd.service.in
+index c02412fb0..18b5e0386 100644
+--- a/scheduler/org.cups.cupsd.service.in
++++ b/scheduler/org.cups.cupsd.service.in
+@@ -2,6 +2,7 @@
+ Description=CUPS Scheduler
+ Documentation=man:cupsd(8)
+ After=network.target nss-user-lookup.target
++Requires=cups.socket
+ 
+ [Service]
+ ExecStart=@sbindir@/cupsd -l

SOURCES/cups-restart-job-hold-until.patch

@@ -0,0 +1,20 @@
+diff --git a/scheduler/ipp.c b/scheduler/ipp.c
+index e0dbc4a..5e9a985 100644
+--- a/scheduler/ipp.c
++++ b/scheduler/ipp.c
+@@ -9891,11 +9891,10 @@ restart_job(cupsd_client_t  *con,	/* I - Client connection */
+     cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ 		"Restarted by \"%s\" with job-hold-until=%s.",
+                 username, attr->values[0].string.text);
+-    cupsdSetJobHoldUntil(job, attr->values[0].string.text, 0);
+-
+-    cupsdAddEvent(CUPSD_EVENT_JOB_CONFIG_CHANGED | CUPSD_EVENT_JOB_STATE,
+-                  NULL, job, "Job restarted by user with job-hold-until=%s",
+-		  attr->values[0].string.text);
++    cupsdSetJobHoldUntil(job, attr->values[0].string.text, 1);
++    cupsdSetJobState(job, IPP_JOB_HELD, CUPSD_JOB_DEFAULT,
++		     "Job restarted by user with job-hold-until=%s",
++		     attr->values[0].string.text);
+   }
+   else
+   {

SOURCES/cups-retry-current-job-man.patch

@@ -0,0 +1,52 @@
+diff --git a/doc/help/man-cupsd.conf.html b/doc/help/man-cupsd.conf.html
+index 9082348..8ab1ce8 100644
+--- a/doc/help/man-cupsd.conf.html
++++ b/doc/help/man-cupsd.conf.html
+@@ -90,7 +90,7 @@ The default value is "30".
+ <dd style="margin-left: 5.0em">Specifies that a failed print job should be aborted (discarded) unless otherwise specified for the printer.
+ <dt><b>ErrorPolicy retry-job</b>
+ <dd style="margin-left: 5.0em">Specifies that a failed print job should be retried at a later time unless otherwise specified for the printer.
+-<dt><b>ErrorPolicy retry-this-job</b>
++<dt><b>ErrorPolicy retry-current-job</b>
+ <dd style="margin-left: 5.0em">Specifies that a failed print job should be retried immediately unless otherwise specified for the printer.
+ <dt><b>ErrorPolicy stop-printer</b>
+ <dd style="margin-left: 5.0em">Specifies that a failed print job should stop the printer unless otherwise specified for the printer. The 'stop-printer' error policy is the default.
+diff --git a/man/cupsd.conf.man.in b/man/cupsd.conf.man.in
+index 53a028d..ba12b07 100644
+--- a/man/cupsd.conf.man.in
++++ b/man/cupsd.conf.man.in
+@@ -135,7 +135,7 @@ Specifies that a failed print job should be aborted (discarded) unless otherwise
+ \fBErrorPolicy retry-job\fR
+ Specifies that a failed print job should be retried at a later time unless otherwise specified for the printer.
+ .TP 5
+-\fBErrorPolicy retry-this-job\fR
++\fBErrorPolicy retry-current-job\fR
+ Specifies that a failed print job should be retried immediately unless otherwise specified for the printer.
+ .TP 5
+ \fBErrorPolicy stop-printer\fR
+diff --git a/man/cupsd.conf.man.in.privilege-escalation b/man/cupsd.conf.man.in.privilege-escalation
+index ab89e15..130ea8a 100644
+--- a/man/cupsd.conf.man.in.privilege-escalation
++++ b/man/cupsd.conf.man.in.privilege-escalation
+@@ -135,7 +135,7 @@ Specifies that a failed print job should be aborted (discarded) unless otherwise
+ \fBErrorPolicy retry-job\fR
+ Specifies that a failed print job should be retried at a later time unless otherwise specified for the printer.
+ .TP 5
+-\fBErrorPolicy retry-this-job\fR
++\fBErrorPolicy retry-current-job\fR
+ Specifies that a failed print job should be retried immediately unless otherwise specified for the printer.
+ .TP 5
+ \fBErrorPolicy stop-printer\fR
+diff --git a/man/cupsd.conf.man.in.remove-weak-ciphers b/man/cupsd.conf.man.in.remove-weak-ciphers
+index 5516780..35065ca 100644
+--- a/man/cupsd.conf.man.in.remove-weak-ciphers
++++ b/man/cupsd.conf.man.in.remove-weak-ciphers
+@@ -135,7 +135,7 @@ Specifies that a failed print job should be aborted (discarded) unless otherwise
+ \fBErrorPolicy retry-job\fR
+ Specifies that a failed print job should be retried at a later time unless otherwise specified for the printer.
+ .TP 5
+-\fBErrorPolicy retry-this-job\fR
++\fBErrorPolicy retry-current-job\fR
+ Specifies that a failed print job should be retried immediately unless otherwise specified for the printer.
+ .TP 5
+ \fBErrorPolicy stop-printer\fR

SOURCES/cups-socket-remove-on-stop.patch

@@ -0,0 +1,12 @@
+diff --git a/scheduler/org.cups.cupsd.socket.in b/scheduler/org.cups.cupsd.socket.in
+index 613b977a6..1deee826a 100644
+--- a/scheduler/org.cups.cupsd.socket.in
++++ b/scheduler/org.cups.cupsd.socket.in
+@@ -4,6 +4,7 @@ PartOf=org.cups.cupsd.service
+ 
+ [Socket]
+ ListenStream=@CUPS_DEFAULT_DOMAINSOCKET@
++RemoveOnStop=on
+ 
+ [Install]
+ WantedBy=sockets.target

SOURCES/cups-sssd.patch

@@ -0,0 +1,13 @@
+diff --git a/scheduler/org.cups.cupsd.service.in b/scheduler/org.cups.cupsd.service.in
+index 11e0662..6fb7a32 100644
+--- a/scheduler/org.cups.cupsd.service.in
++++ b/scheduler/org.cups.cupsd.service.in
+@@ -1,7 +1,7 @@
+ [Unit]
+ Description=CUPS Scheduler
+ Documentation=man:cupsd(8)
+-After=network.target ypbind.service
++After=network.target nss-user-lookup.target
+ 
+ [Service]
+ ExecStart=@sbindir@/cupsd -l

SOURCES/cups-validate-1st.patch

@@ -0,0 +1,28 @@
+diff --git a/backend/ipp.c b/backend/ipp.c
+index 0a70a87..f8bf7e1 100644
+--- a/backend/ipp.c
++++ b/backend/ipp.c
+@@ -327,6 +327,7 @@ main(int  argc,				/* I - Number of command-line args */
+ 		get_job_attrs = 0,	/* Does printer support Get-Job-Attributes? */
+ 		send_document = 0,	/* Does printer support Send-Document? */
+ 		validate_job = 0,	/* Does printer support Validate-Job? */
++		validation_retried = 0,	/* Indicate whether Validate-Job was retried */
+ 		copies,			/* Number of copies for job */
+ 		copies_remaining;	/* Number of copies remaining */
+   const char	*content_type,		/* CONTENT_TYPE environment variable */
+@@ -1597,7 +1598,15 @@ main(int  argc,				/* I - Number of command-line args */
+              ipp_status == IPP_BAD_REQUEST)
+       break;
+     else if (job_auth == NULL && ipp_status > IPP_BAD_REQUEST)
++    {
++      if (!validation_retried)
++      {
++        validation_retried = 1;
++        sleep(10);
++        continue;
++      }
+       goto cleanup;
++    }
+   }
+ 
+  /*

SOURCES/upgrade_get_document.py.in

@@ -0,0 +1,171 @@
+@PYTHON_SHEBANG@
+
+"""
+Upgrade script to enable authentication for CUPS-Get-Document in
+default policy
+"""
+
+import os
+import sys
+from shutil import copy
+
+
+def get_cupsd_conf():
+    """
+    Get all lines from cupsd.conf
+    """
+    if not os.path.exists('/etc/cups/cupsd.conf'):
+        return None
+
+    lines = []
+    with open('/etc/cups/cupsd.conf', 'r') as conf:
+        lines = conf.readlines()
+
+    return lines
+
+
+def get_default_policy(lines):
+    """
+    Get the default policy lines
+
+    :param list lines: lines from cupsd.conf
+    """
+    default_policy = []
+    in_policy = False
+
+    for line in lines:
+        if not in_policy and not line.lstrip().startswith('<Policy default>'):
+            continue
+
+        default_policy.append(line)
+
+        if line.lstrip().startswith('</Policy>'):
+            return default_policy
+
+        in_policy = True
+
+    return default_policy
+
+
+def get_limit_with_document(lines):
+    """
+    Get <Limit> scope which defines CUPS-Get-Document operation
+
+    :param list lines: Lines containing the default policy
+    """
+    limit = []
+    in_limit = False
+
+    for line in lines:
+        if not in_limit and not line.lstrip().startswith('<Limit'):
+            continue
+
+        if (not in_limit and line.lstrip().startswith('<Limit') and
+            not 'CUPS-Get-Document' in line.lstrip().split('#')[0][1:-1]):
+            continue
+
+        limit.append(line)
+
+        if line.lstrip().startswith('</Limit>'):
+            return limit
+
+        in_limit = True
+
+    return limit
+
+
+def check_for_authtype(lines):
+    """
+    Check if <Limit> defining CUPS-Get-Document defines
+    any authentication
+
+    :param list lines: Lines of <Limit> scope which defines CUPS-Get-Document
+    """
+    for line in lines:
+        if line.lstrip().startswith('AuthType'):
+            return True
+    return False
+
+
+def migrate_cupsd_conf(lines):
+    """
+    Make changes to cupsd.conf contents to use authentication
+    for CUPS-Get-Document
+
+    :param list lines: Lines from cupsd.conf
+    """
+    new_lines = []
+    in_policy = False
+    create_document_limit = False
+
+    for line in lines:
+        if (in_policy and line.lstrip().startswith('<Limit') and
+            not line.lstrip().startswith('<Limit CUPS-Get-Document>') and
+            'CUPS-Get-Document' in line.lstrip().split('#')[0][1:-1]):
+            line = line.replace(' CUPS-Get-Document', '')
+            create_document_limit = True
+
+        if in_policy and line.lstrip().startswith('</Policy>') and create_document_limit:
+            new_lines.append('\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             '# added during upgrade\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             '<Limit CUPS-Get-Document>\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 4) * ' ' +
+                             'AuthType Default\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 4) * ' ' +
+                             'Require user @OWNER @SYSTEM\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 4) * ' ' +
+                             'Order deny,allow\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             '</Limit>\n')
+            create_document_limit = False
+
+        new_lines.append(line)
+
+        if not in_policy:
+            if line.lstrip().startswith('<Policy default>'):
+                in_policy = True
+            continue
+
+        if line.lstrip().startswith('<Limit CUPS-Get-Document>'):
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             '# added during upgrade\n')
+            new_lines.append((len(line) - len(line.lstrip()) + 2) * ' ' +
+                             'AuthType Default\n')
+            continue
+
+        if line.lstrip().startswith('</Policy>'):
+            in_policy = False
+            continue
+
+    return new_lines
+
+
+def apply_changes(lines):
+    """
+    Backup the original file if there is no .rpmsave already and
+    apply changes to the actual cupsd.conf
+
+    :param list lines: New lines for cupsd.conf
+    """
+    if not os.path.exists('/etc/cups/cupsd.conf.rpmsave'):
+        copy('/etc/cups/cupsd.conf', '/etc/cups/cupsd.conf.rpmsave')
+
+    with open('/etc/cups/cupsd.conf', 'w') as conf:
+        conf.writelines(lines)
+
+
+
+content = get_cupsd_conf()
+if content is None:
+    sys.exit(1)
+
+if check_for_authtype(get_limit_with_document(get_default_policy(content))):
+    sys.exit(0)
+
+new_content = migrate_cupsd_conf(content)
+
+apply_changes(new_content)
+
+sys.exit(0)

SPECS/cups.spec

@@ -7,6 +7,13 @@
 # but we use lib for compatibility with 3rd party drivers (at upstream request).
 %global cups_serverbin %{_exec_prefix}/lib/cups
 
+# we still need something for python2...
+%if 0%{?rhel} >= 8 || 0%{?fedora}
+%global __python %{__python3}
+%else
+%global __python /usr/bin/python2
+%endif
+
 #%%global prever rc1
 #%%global VERSION %%{version}%%{prever}
 %global VERSION %{version}
@@ -15,7 +22,7 @@ Summary: CUPS printing system
 Name: cups
 Epoch: 1
 Version: 2.2.6
-Release: 33%{?dist}
+Release: 60%{?dist}
 License: GPLv2+ and LGPLv2 with exceptions and AML
 Url: http://www.cups.org/
 Source0: https://github.com/apple/cups/releases/download/v%{VERSION}/cups-%{VERSION}-source.tar.gz
@@ -26,6 +33,8 @@ Source6: cups.logrotate
 # Backend for NCP protocol
 Source7: ncp.backend
 Source8: macros.cups
+# CVE-2023-32360 migration script
+Source9: upgrade_get_document.py.in
 
 Patch1: cups-no-gzip-man.patch
 Patch2: cups-system-auth.patch
@@ -89,8 +98,96 @@ Patch50: cups-do-not-advertise-http-methods.patch
 Patch51: 0001-Multiple-security-disclosure-issues.patch
 # 1775668 - cupsd eats a lot of memory when lots of queue with extensive PPDs are created
 Patch52: cups-memory-consumption.patch
+# 1784884 - cups.service doesn't execute automatically on request
+Patch53: cups-autostart-when-enabled.patch
+# 1825253 - CVE-2020-3898 cups: heap based buffer overflow in libcups's ppdFindOption() in ppd-mark.c
+Patch54: cups-ppdopen-heap-overflow.patch
+# 1838449 - ipp/socket backends connect to turned off device for eternity (contimeout is not applied)
+Patch55: cups-etimedout.patch
+# 1689207 - Add failover backend
+Patch56: cups-failover-backend.patch
+# 1833516 - DirtyCleanInterval ignored if there are open client connections
+Patch57: cups-dirtyclean.patch
+# 1775590 - rastertoepson filter crashes with paper size A6
+Patch58: cups-rastertoepson-crash.patch
+# 1941437 - cupsd doesn't log job ids when logging into journal
+Patch59: cups-logs.patch
+# 1782216 - Print queue is paused after ipp backend ends with CUPS_BACKEND_STOP
+Patch60: cups-validate-1st.patch
+# 1938384 - CUPS doesn't start if sssd starts after cupsd
+Patch61: cups-sssd.patch
+# 1955964 - PreserveJobHistory doesn't work with seconds
+Patch62: cups-fix-preservejob-times.patch
+# 1927452 - CVE-2020-10001 cups: access to uninitialized buffer in ipp.c [rhel-8]
+Patch63: cups-cve202010001.patch
+# 2006987 - Unauthenticated users can't move print jobs in Web UI
+Patch64: 0001-cgi-bin-ipp-var.c-Use-guest-user-for-Move-Job-when-n.patch
+# 2017919 - Setting 'MaxJobTime 0' does not set a job time to unlimited
+Patch65: 0001-Fix-handling-of-MaxJobTime-0-Issue-5438.patch
+# 1726383 - "lpadmin -p <queue> -o cupsSNMPSupplies:false" doesn't work
+Patch66: 0001-Fix-lpadmin-with-cupsIPPSupplies-and-cupsSNMPSupplie.patch
+# 1982891 - Printing of banner before PCL file only prints banner
+Patch67: 0001-scheduler-job.c-use-gziptoany-for-raw-files-not-just.patch
+# 2006591 - Trying to restart and hold a job doesn't work
+Patch68: cups-restart-job-hold-until.patch
+# 1811716 - lpr to non-existent printer reports incorrect error
+Patch69: 0001-cups-dests.c-cupsGetNamedDest-set-IPP_STATUS_ERROR_N.patch
+# 2015182 - RFE: Implement IdleExitTimeout configuration during build
+Patch70: 0001-Add-with-idle-exit-timeout-configure-option.patch
+# 2013865 - RFE: Implement TimeoutStartSec configuration during build
+Patch71: 0001-Add-with-systemd-timeoutstartsec-configure-option.patch
+# 2032965 - [RFE] RHEL8 - CUPS Web UI supports adding IPP Everywhere
+Patch72: cups-ippeve-web-support.patch
+# 2071417 - 30-second delays printing to Windows 2016 server via HTTPS
+Patch73: 0001-cups-tls-gnutls.c-Use-always-GNUTLS_SHUT_WR.patch
+# 2074684 - lp to a remote server takes a long time
+Patch74: 0001-Use-cupsGetNamedDest-for-legacy-printing-APIs-Issue-.patch
+# 2074736 - CUPS is too chatty about "Removing document files." in debug mode
+Patch75: cups-cupsd-too-chatty.patch
+# CVE-2022-26691 cups: authorization bypass when using "local" authorization
+Patch76: 0001-scheduler-cert.c-Fix-string-comparison-fixes-CVE-202.patch
+# 2084257 - ErrorPolicy documentation is incorrect
+Patch77: cups-retry-current-job-man.patch
+# 1910415 - manpage update to acknowledge order dependency of -h option
+Patch78: 0001-Update-man-pages-for-h-option-Issue-357.patch
+# 2130391 - Kerberized IPP Printing Fails
+Patch79: cups-kerberos.patch
+# 2217178 - Delays printing to lpd when reserved ports are exhausted
+Patch80: 0001-Fix-delays-printing-to-lpd-when-reserved-ports-are-e.patch
+# 2217283 - The command "cancel -x <job>" does not remove job files
+Patch81: 0001-Use-purge-job-instead-of-purge-jobs-when-canceling-a.patch
+# 2217955 - Enlarge backlog queue for listen() in cupsd
+Patch82: 0001-cups-http-addr.c-Set-listen-backlog-size-to-INT_MAX-.patch
+# CVE-2023-34241 cups: use-after-free in cupsdAcceptClient() in scheduler/client.c
+Patch83: 0001-Log-result-of-httpGetHostname-BEFORE-closing-the-con.patch
+# CVE-2023-32324 cups: heap buffer overflow may lead to DoS
+Patch84: 0001-cups-strlcpy-handle-zero-size.patch
+# CVE-2023-32360 cups:  Information leak through Cups-Get-Document operation
+Patch85: 0001-Require-authentication-for-CUPS-Get-Document.patch
+# RHEL-14933 cupsd memory leak in cupsdDeleteJob() with "PreserveJobHistory Off"
+Patch86: cups-preservejob-leak.patch
+# RHEL-15309 cupsd fails to open cups-files.conf and the resulting error message is lost
+Patch87: 0001-scheduler-conf.c-Print-to-stderr-if-we-don-t-open-cu.patch
+# RHEL-10702 cupsGetJobs fails to connect if poll() gets POLLOUT|POLLHUP in revents
+Patch88: 0001-httpAddrConnect2-Check-for-error-if-POLLHUP-is-in-va.patch
+# RHEL-40386 CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+# https://github.com/OpenPrinting/cups/commit/a436956
+Patch89: 0001-Fix-domain-socket-handling.patch
+# RHEL-40386 CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+# https://github.com/OpenPrinting/cups/pull/31
+Patch90: cups-require-cups-socket.patch
+# RHEL-40386 CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+# https://github.com/OpenPrinting/cups/commit/3448c52
+Patch91: cups-socket-remove-on-stop.patch
+# RHEL-40386 CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+# https://github.com/OpenPrinting/cups/commit/7adb508
+# https://github.com/OpenPrinting/cups/commit/824f49f
+# https://github.com/OpenPrinting/cups/commit/56b9728
+# https://github.com/OpenPrinting/cups/commit/74f437b
+# https://github.com/OpenPrinting/cups/commit/fb0c914
+Patch92: cups-check-for-listeners.patch
 
-Patch100: cups-lspp.patch
+Patch1000: cups-lspp.patch
 
 Requires: %{name}-filesystem = %{epoch}:%{version}-%{release}
 Requires: %{name}-libs%{?_isa} = %{epoch}:%{version}-%{release}
@@ -135,6 +232,9 @@ Requires(post): grep, sed
 Requires(preun): systemd
 Requires(postun): systemd
 
+# for upgrade-get-document script
+Requires(post): %{__python}
+
 # We ship udev rules which use setfacl.
 Requires: systemd
 Requires: acl
@@ -289,7 +389,7 @@ Sends IPP requests to the specified URI and tests and/or displays the results.
 
 %if %{lspp}
 # LSPP support.
-%patch100 -p1 -b .lspp
+%patch1000 -p1 -b .lspp
 %endif
 
 # substitute default values for invalid job attributes (upstream #5186 and #5229)
@@ -321,6 +421,94 @@ Sends IPP requests to the specified URI and tests and/or displays the results.
 %patch51 -p1 -b .cve-in-scheduler
 # 1775668 - cupsd eats a lot of memory when lots of queue with extensive PPDs are created
 %patch52 -p1 -b .memory-consumption
+# 1784884 - cups.service doesn't execute automatically on request
+%patch53 -p1 -b .autostart-when-enabled
+# 1825253 - CVE-2020-3898 cups: heap based buffer overflow in libcups's ppdFindOption() in ppd-mark.c
+%patch54 -p1 -b .ppdopen-heap-overflow
+# 1838449 - ipp/socket backends connect to turned off device for eternity (contimeout is not applied)
+%patch55 -p1 -b .etimedout
+# 1689207 - Add failover backend
+%patch56 -p1 -b .failover
+# 1833516 - DirtyCleanInterval ignored if there are open client connections
+%patch57 -p1 -b .dirtyclean
+# 1775590 - rastertoepson filter crashes with paper size A6
+%patch58 -p1 -b .rastertoepson-crash
+# 1941437 - cupsd doesn't log job ids when logging into journal
+%patch59 -p1 -b .logs
+# 1782216 - Print queue is paused after ipp backend ends with CUPS_BACKEND_STOP
+%patch60 -p1 -b .validate-1st
+# 1938384 - CUPS doesn't start if sssd starts after cupsd
+%patch61 -p1 -b .sssd
+# 1955964 - PreserveJobHistory doesn't work with seconds
+%patch62 -p1 -b .cups-fix-preservejob-times
+# 1927452 - CVE-2020-10001 cups: access to uninitialized buffer in ipp.c [rhel-8]
+%patch63 -p1 -b .cve202010001
+# 2006987 - Unauthenticated users can't move print jobs in Web UI
+%patch64 -p1 -b .move-job
+# 2017919 - Setting 'MaxJobTime 0' does not set a job time to unlimited
+%patch65 -p1 -b .maxjobtime
+# 1726383 - "lpadmin -p <queue> -o cupsSNMPSupplies:false" doesn't work
+%patch66 -p1 -b .supplies
+# 1982891 - Printing of banner before PCL file only prints banner
+%patch67 -p1 -b .banner-rawfiles
+# 2006591 - Trying to restart and hold a job doesn't work
+%patch68 -p1 -b .restart-hold-job
+# 1811716 - lpr to non-existent printer reports incorrect error
+%patch69 -p1 -b .lplpr-better-error
+# 2015182 - RFE: Implement IdleExitTimeout configuration during build
+%patch70 -p1 -b .idleexittimeout
+# 2013865 - RFE: Implement TimeoutStartSec configuration during build
+%patch71 -p1 -b .timeoutstartsec
+# 2032965 - [RFE] RHEL8 - CUPS Web UI supports adding IPP Everywhere
+%patch72 -p1 -b .ippeve-web-support
+# 2071417 - 30-second delays printing to Windows 2016 server via HTTPS
+%patch73 -p1 -b .gnutlsbye
+# 2074684 - lp to a remote server takes a long time
+%patch74 -p1 -b .lp-long-time
+# 2074736 - CUPS is too chatty about "Removing document files." in debug mode
+%patch75 -p1 -b .cupsd-too-chatty
+# CVE-2022-26691 cups: authorization bypass when using "local" authorization
+%patch76 -p1 -b .cve26691
+# 2084257 - ErrorPolicy documentation is incorrect
+%patch77 -p1 -b .retry-current-job-man
+# 1910415 - manpage update to acknowledge order dependency of -h option
+%patch78 -p1 -b .manpage-update
+# 2130391 - Kerberized IPP Printing Fails
+%patch79 -p1 -b .kerberos
+# 2217178 - Delays printing to lpd when reserved ports are exhausted
+%patch80 -p1 -b .lpd-delay
+# 2217283 - The command "cancel -x <job>" does not remove job files
+%patch81 -p1 -b .purge-job
+# 2217955 - Enlarge backlog queue for listen() in cupsd
+%patch82 -p1 -b .listen-backlog
+# CVE-2023-34241 cups: use-after-free in cupsdAcceptClient() in scheduler/client.c
+%patch83 -p1 -b .cve34241
+# CVE-2023-32324 cups: heap buffer overflow may lead to DoS
+%patch84 -p1 -b .cve32324
+# CVE-2023-32360 cups: Information leak through Cups-Get-Document operation
+%patch85 -p1 -b .get-document-auth
+# RHEL-14933 cupsd memory leak in cupsdDeleteJob() with "PreserveJobHistory Off"
+%patch86 -p1 -b .preservejob-leak
+# RHEL-15309 cupsd fails to open cups-files.conf and the resulting error message is lost
+%patch87 -p1 -b .message-stderr
+# RHEL-10702 cupsGetJobs fails to connect if poll() gets POLLOUT|POLLHUP in revents
+%patch88 -p1 -b .cupsgetjobs-pollhup
+# RHEL-40386 CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+# https://github.com/OpenPrinting/cups/commit/a436956
+%patch89 -p1 -b .cve2024-35235
+# RHEL-40386 CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+# https://github.com/OpenPrinting/cups/pull/31
+%patch90 -p1 -b .cups-require-cups-socket
+# RHEL-40386 CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+# https://github.com/OpenPrinting/cups/commit/3448c52
+%patch91 -p1 -b .cups-remove-on-stop
+# RHEL-40386 CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+# https://github.com/OpenPrinting/cups/commit/7adb508
+# https://github.com/OpenPrinting/cups/commit/824f49f
+# https://github.com/OpenPrinting/cups/commit/56b9728
+# https://github.com/OpenPrinting/cups/commit/74f437b
+# https://github.com/OpenPrinting/cups/commit/fb0c914
+%patch92 -p1 -b .cups-check-for-listeners
 
 sed -i -e '1iMaxLogSize 0' conf/cupsd.conf.in
 
@@ -370,6 +558,10 @@ export CXX=g++
 	--with-xinetd=no \
 	--with-access-log-level=actions \
 	--enable-page-logging \
+%if 0%{?rhel}
+  --without-idle-exit-timeout \
+  --without-systemd-timeoutstartsec \
+%endif
 	localedir=%{_datadir}/locale
 
 # If we got this far, all prerequisite libraries must be here.
@@ -466,6 +658,11 @@ s:.*\('%{_datadir}'/\)\([^/_]\+\)\(.*\.po$\):%lang(\2) \1\2\3:
 /^\([^%].*\)/d
 ' > %{name}.lang
 
+# install get-document upgrade script
+install -m 0755 %{SOURCE9} %{buildroot}%{_sbindir}/upgrade_get_document
+
+sed -i 's,@PYTHON_SHEBANG@,#!%{__python},' %{buildroot}%{_sbindir}/upgrade_get_document
+
 %post
 %systemd_post %{name}.path %{name}.socket %{name}.service
 
@@ -516,7 +713,19 @@ do
 done
 %endif
 
-%{_bindir}/rm /var/cache/cups/*.data
+%{_bindir}/rm /var/cache/cups/*.data > /dev/null 2>&1
+
+if [ -e /etc/systemd/system/printer.target.wants/cups.service ]
+then
+  %{_bindir}/systemctl enable cups.service > /dev/null 2>&1
+fi
+
+# 2013865 - if the directive is not in cupsd.conf, add it (needed during upgrades if
+# user had changed the config file)
+grep '^\s*IdleExitTimeout' %{_sysconfdir}/cups/cupsd.conf &> /dev/null || echo -e '\nIdleExitTimeout 0' \
+>> %{_sysconfdir}/cups/cupsd.conf
+
+%{_sbindir}/upgrade_get_document
 
 exit 0
 
@@ -726,6 +935,119 @@ rm -f %{cups_serverbin}/backend/smb
 %{_mandir}/man5/ipptoolfile.5.gz
 
 %changelog
+* Tue Jun 18 2024 Pavol Zacik <pzacik@redhat.com>  - 1:2.2.6-60
+- RHEL-40386 cups: Cupsd Listen arbitrary chmod 0140777
+- Delete the domain socket file after stopping the cups.socket service
+- Fix cupsd Listener checks
+
+* Fri Jun 14 2024 Pavol Zacik <pzacik@redhat.com> - 1:2.2.6-59
+- RHEL-40386 cups: Cupsd Listen arbitrary chmod 0140777
+- Require cups.socket in cupsd service file
+
+* Mon Jun 10 2024 Pavol Zacik <pzacik@redhat.com> - 1:2.2.6-58
+- CVE-2024-35235 cups: Cupsd Listen arbitrary chmod 0140777
+
+* Mon Feb 26 2024 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-57
+- revert RHEL-19200 - no new subpackages are needed
+
+* Wed Dec 20 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-56
+- RHEL-10702 cupsGetJobs fails to connect if poll() gets POLLOUT|POLLHUP in revents
+- RHEL-19200 Recommend new cups-filters subpackages with weak dep for better upgrade exp
+
+* Fri Nov 03 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-55
+- RHEL-14933 cupsd memory leak in cupsdDeleteJob() with "PreserveJobHistory Off"
+- RHEL-15309 cupsd fails to open cups-files.conf and the resulting error message is lost
+
+* Tue Sep 12 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-54
+- RHEL-2612 - cups pulls an unneeded dependency on python3
+
+* Tue Aug 29 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-53
+- CVE-2023-32360 cups: Information leak through Cups-Get-Document operation
+
+* Thu Jun 29 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-52
+- 2217178 - Delays printing to lpd when reserved ports are exhausted
+- 2217283 - The command "cancel -x <job>" does not remove job files
+- 2217955 - Enlarge backlog queue for listen() in cupsd
+- CVE-2023-34241 cups: use-after-free in cupsdAcceptClient() in scheduler/client.c
+- CVE-2023-32324 cups: heap buffer overflow may lead to DoS
+
+* Mon Apr 03 2023 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-51
+- RHEL-316 - Enable fmf tests in centos stream
+
+* Wed Dec 14 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-51
+- 2130391 - Kerberized IPP Printing Fails
+
+* Fri Jul 01 2022 Richard Lescak <rlescak@redhat.com> - 1:2.2.6-50
+- 1910415 - corrected manpage patch, one lpoptions usage wasn't changed
+
+* Thu Jun 16 2022 Richard Lescak <rlescak@redhat.com> - 1:2.2.6-49
+- 1910415 - manpage update to acknowledge order dependency of -h option
+
+* Tue May 31 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-48
+- 2084257 - ErrorPolicy documentation is incorrect
+
+* Thu May 26 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-47
+- CVE-2022-26691 cups: authorization bypass when using "local" authorization
+
+* Fri May 13 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-46
+- 2074684 - lp to a remote server takes a long time
+- 2074736 - CUPS is too chatty about "Removing document files." in debug mode
+
+* Fri Apr 08 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-45
+- 2071417 - 30-second delays printing to Windows 2016 server via HTTPS
+
+* Wed Jan 19 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-44
+- 2015182 - RFE: Implement IdleExitTimeout configuration during build
+
+* Thu Jan 06 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-43
+- 2032965 - [RFE] RHEL8 - CUPS Web UI supports adding IPP Everywhere
+
+* Thu Dec 16 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-42
+- 2013865 - RFE: Implement TimeoutStartSec configuration during build
+
+* Mon Nov 29 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-42
+- 2015182 - RFE: Implement IdleExitTimeout configuration during build
+
+* Wed Nov 03 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-41
+- 2006987 - Unauthenticated users can't move print jobs in Web UI
+- 2017919 - Setting 'MaxJobTime 0' does not set a job time to unlimited
+- 1726383 - "lpadmin -p <queue> -o cupsSNMPSupplies:false" doesn't work
+- 1982891 - Printing of banner before PCL file only prints banner
+- 2006591 - Trying to restart and hold a job doesn't work
+- 1811716 - lpr to non-existent printer reports incorrect error
+
+* Fri May 14 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-40
+- 1955964 - PreserveJobHistory doesn't work with seconds
+- 1927452 - CVE-2020-10001 cups: access to uninitialized buffer in ipp.c [rhel-8]
+
+* Wed May 05 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-39
+- 1941437 - cupsd doesn't log job ids when logging into journal
+- 1782216 - Print queue is paused after ipp backend ends with CUPS_BACKEND_STOP
+- 1938384 - CUPS doesn't start if sssd starts after cupsd
+
+* Tue May 26 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-38
+- 1775590 - rastertoepson filter crashes with paper size A6
+
+* Mon May 25 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-37
+- forgot to enable optimization - 1833516 
+
+* Fri May 22 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-36
+- 1838449 - ipp/socket backends connect to turned off device for eternity (contimeout is not applied)
+- 1689207 - Add failover backend
+- 1833516 - DirtyCleanInterval ignored if there are open client connections
+
+* Tue Apr 21 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-35
+- 1825254 - CVE-2020-3898 cups: heap based buffer overflow in libcups's ppdFindOption() in ppd-mark.c
+
+* Mon Apr 20 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-34
+- 1809002 - scriptlet issue, /usr/bin/rm: cannot remove '/var/cache/cups/*.data'
+
+* Thu Apr 09 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-34
+- 1784884 - cups.service doesn't execute automatically on request
+
+* Wed Apr 08 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-34
+- 1822135 - _ppdOpen() leaks 'string' variable
+
 * Fri Feb 14 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-33
 - fix more memory leaks found by coverity in 1775668