autofs/SOURCES/autofs-5.1.5-fix-additional-typing-errors.patch
2021-10-08 09:51:03 +00:00

384 lines
17 KiB
Diff

autofs-5.1.5 - fix additional typing errors
From: Andreas P <nurgrak@gmail.com>
Fix some more typing errors.
imk: added changes discussed on mailing list.
Signed-off-by: Andreas P <nurgrak@gmail.com>
Signed-off-by: Ian Kent <raven@themaw.net>
---
CHANGELOG | 1 +
INSTALL | 2 +-
README.replicated-server | 2 +-
man/auto.master.5.in | 14 +++++++-------
man/autofs.5 | 9 ++++-----
man/autofs.conf.5.in | 29 ++++++++++++++---------------
man/autofs_ldap_auth.conf.5.in | 2 +-
man/automount.8 | 2 +-
modules/lookup_ldap.c | 4 ++--
modules/replicated.c | 4 ++--
redhat/autofs.conf.default.in | 14 +++++++-------
redhat/autofs.sysconfig | 2 +-
samples/autofs.conf.default.in | 10 +++++-----
13 files changed, 47 insertions(+), 48 deletions(-)
--- autofs-5.1.4.orig/CHANGELOG
+++ autofs-5.1.4/CHANGELOG
@@ -113,6 +113,7 @@ xx/xx/2018 autofs-5.1.5
- simplify sss source stale check.
- use defines for expire type.
- remove unused function dump_master().
+- fix additional typing errors.
19/12/2017 autofs-5.1.4
- fix spec file url.
--- autofs-5.1.4.orig/INSTALL
+++ autofs-5.1.4/INSTALL
@@ -119,7 +119,7 @@ For example, Fedora Core 4 kernel packag
would use the 2.6.12 patch because it applies the 2.6.12 release
candidate revision 6 patch. But the autofs patch doesn't apply
because the rpm also applies a patch somewhere that changes one
-area the the patch also changes but this change is not present
+area the patch also changes but this change is not present
in the 2.6.12 release kernel.
On the other hand, Fedora Core 3 kernel 2.6.12-1.1381_FC3
--- autofs-5.1.4.orig/README.replicated-server
+++ autofs-5.1.4/README.replicated-server
@@ -34,7 +34,7 @@ the following selection rules.
- PROXIMITY_OTHER, host is on a network not directlty
reachable through a local interface.
-2) NFS version and protocol is selected by caclculating the largest
+2) NFS version and protocol is selected by calculating the largest
number of hosts supporting an NFS version and protocol that
have the closest proximity. These hosts are added to the list
in response time order. Hosts may have a corresponding weight
--- autofs-5.1.4.orig/man/auto.master.5.in
+++ autofs-5.1.4/man/auto.master.5.in
@@ -211,12 +211,12 @@ due to application accesses triggered by
This option allows mount propagation of bind mounts to be set to
either \fIslave\fP or \fIprivate\fP. This option may be needed when using
multi-mounts that have bind mounts that bind to a file system that is
-propagation shared. This is becuase the bind mount will have the same
+propagation shared. This is because the bind mount will have the same
properties as its target which causes problems for offset mounts. When
this happens an unwanted offset mount is propagated back to the target
file system resulting in a deadlock when attempting to access the offset.
-This option is a an autofs pseudo mount option that can be used in the
-master map only. By default bind mounts will inherit the mount propagation
+This option is an autofs pseudo mount option that can be used in the
+master map only. By default, bind mounts will inherit the mount propagation
of the target file system.
.TP
.I "\-r, \-\-random-multimount-selection"
@@ -261,7 +261,7 @@ accessing /net/myserver will mount expor
/net/myserver.
.P
NOTE: mounts done from a hosts map will be mounted with the "nosuid,nodev,intr" options
-unless overridden by explicily specifying the "suid", "dev" or "nointr" options in the
+unless overridden by explicitly specifying the "suid", "dev" or "nointr" options in the
master map entry.
.SH LDAP MAPS
If the map type \fBldap\fP is specified the mapname is of the form
@@ -277,7 +277,7 @@ configuration, in which case the map nam
.P
If no schema is set in the autofs configuration then autofs will check
each of the commonly used schema for a valid entry and if one is found
-it will used for subsequent lookups.
+it will be used for subsequent lookups.
.P
There are three common schemas in use:
.TP
@@ -351,7 +351,7 @@ connection is to be used then the client
locations must also be configured within the LDAP client.
.P
In OpenLDAP these may be configured in the \fBldap.conf\fP file or in the
-per-user configuration. For example it may be sensible to use the system
+per-user configuration. For example, it may be sensible to use the system
wide configuration for the location of the Certificate Authority certificate
and set the location of the client certificate and private key
in the per-user configuration. The location of these files and the configuration
@@ -399,5 +399,5 @@ configuration will be used to locate the
.BR autofs_ldap_auth.conf (5).
.SH AUTHOR
This manual page was written by Christoph Lameter <chris@waterf.org>,
-for the Debian GNU/Linux system. Edited by <hpa@transmeta.com> and
+for the Debian GNU/Linux system. Edited by <hpa@transmeta.com> and
Ian Kent <raven@themaw.net> .
--- autofs-5.1.4.orig/man/autofs.5
+++ autofs-5.1.4/man/autofs.5
@@ -64,7 +64,6 @@ can't be mounted.
.br
is used to make the weight the sole factor in selecting a server when multiple
servers are present in a map entry.
-and
.TP
.B \-no-use-weight-only
.br
@@ -192,7 +191,7 @@ SHOST Short hostname (domain part remove
.sp
If a program map is used these standard environment variables will have
a prefix of "AUTOFS_" to prevent interpreted languages like python from
-being able to load and execute arbitray code from a user home directory.
+being able to load and execute arbitrary code from a user home directory.
.RE
.sp
Additional entries can be defined with the \-Dvariable=Value map-option to
@@ -293,10 +292,10 @@ may be negated with the \fB!\fP.
For a \fBlocation\fP to be selected for a mount attempt all of its \fBselectors\fP
must evaluate to true. If a \fBlocation\fP is selected for a mount attempt
and succeeds the lookup is completed and returns success. If the mount
-attempt fails the proceedure continues with the next \fBlocation\fP until
+attempt fails the procedure continues with the next \fBlocation\fP until
they have all been tried.
-In addition some \fBselectors\fP take no argumenets, some one argument
+In addition, some \fBselectors\fP take no arguments, some one argument
and others optionally take two arguments.
The \fBselectors\fP that take no arguments are:
@@ -584,7 +583,7 @@ In the first line we have an NFS remote
another nfs mount for the exported directory /work/util from host zeus.
This would be mounted on /test/util.
-Finally we have an example of the use of the \fBsublink\fP option. In
+Finally, we have an example of the use of the \fBsublink\fP option. In
this case the filesystem bilbo:/shared would be mounted on a path
external the automount directory (under the direcory given by
configuration option auto_dir) and the path /test/local either
--- autofs-5.1.4.orig/man/autofs.conf.5.in
+++ autofs-5.1.4/man/autofs.conf.5.in
@@ -91,7 +91,7 @@ set default log level "none", "verbose"
.B force_standard_program_map_env
.br
override the use of a prefix with standard environment variables when a
-program map is executed. Since program maps are run as the privileded
+program map is executed. Since program maps are run as the privileged
user setting these standard environment variables opens automount(8) to
potential user privilege escalation when the program map is written in a
language that can load components from, for example, a user home directory
@@ -110,16 +110,15 @@ and a direct map with 8000 entries would
containing an average of 8 entries, which should be acceptable.
However, if excessive CPU usage is observed during automount lookups
-increasing this option can reduce the CPU overhead considerably becuase
+increasing this option can reduce the CPU overhead considerably because
it reduces the length of the search chains.
Note that the number of entries in a map doesn't necessarily relate
to the number of entries used in the map entry cache.
-There are three distinct cases, direct maps and indirect maps that
-use the "browse" option must be read in their entirity at program
-start so, in these two cases the map size does retate directly to
-the map entry cache size.
+There are two distinct cases where the map hash table can make a
+significant difference, direct maps and indirect maps that use the
+"browse" option.
For indirect maps that do not use the "browse" option entries are
added to the map entry cache at lookup so the number of active cache
@@ -174,7 +173,7 @@ by the number of retries that would be u
.B use_mount_request_log_id
.br
Set whether to use a mount request log id so that log entries for specific
-mount requests can be easily identified in logs that have multiple conncurrent
+mount requests can be easily identified in logs that have multiple concurrent
requests. Default is don't use mount request log ids.
.SS LDAP Configuration
.P
@@ -183,7 +182,7 @@ Configuration settings available are:
.B ldap_timeout
.br
Set the network response timeout (default 8).
-Set timeout value for the synchronous API calls. The default is the LDAP
+Set timeout value for the synchronous API calls. The default is the LDAP
library default of an infinite timeout.
.TP
.B ldap_network_timeout
@@ -323,7 +322,7 @@ cleaned on re-load, which is done when m
so these configuration entries are not used by autofs. An
exception to this is the case where the map is large. In this
case it may be necessary to read the whole map at startup even if
-browsing is is not enabled. Adding the cache:=all option to
+browsing is not enabled. Adding the cache:=all option to
map_options can be used to for this.
.TP
.B localhost_address
@@ -390,14 +389,14 @@ and that will be done.
Allow map keys to be shown in directory listings. This option
can have values of "yes" or "no". The default is "no". A variation
of this option, "browsable", can be used as a pseudo mount option
-in type "auto" map entries to provide provide browsing funtionality
+in type "auto" map entries to provide browsing functionality
in sub-mounts. The amd "browsable_dirs = full" option cannot be
implemented within the current autofs framework and is not supported.
.TP
.B exec_map_timeout
.br
-A timeout is not currently used for for program maps, might be
-implemented.
+A timeout is not currently used for program maps but this might be
+implemented in the future.
.TP
.B tag
.br
@@ -473,7 +472,7 @@ its official host name.
.TP
.B domain_strip
.br
-If set to "yes" the domain name part of the host is strippped
+If set to "yes" the domain name part of the host is stripped
when normalizing hostnames. This can be useful when using of
the same maps in a multiple domain environment.
.TP
@@ -497,8 +496,8 @@ that is used for queries if ldap is to b
.B ldap_hostports
.br
This option has no default value set. It must be set to the URI
-of the LDAP server to be used for lookups wheni ldap is used a
-map source. It may contain a comma or space separated list of
+of the LDAP server to be used for lookups when ldap is used as
+a map source. It may contain a comma or space separated list of
LDAP URIs.
.TP
.B hesiod_base
--- autofs-5.1.4.orig/man/autofs_ldap_auth.conf.5.in
+++ autofs-5.1.4/man/autofs_ldap_auth.conf.5.in
@@ -56,7 +56,7 @@ required in order to perform ldap querie
sasl authenticated connections will be allowed. If it is set to no then
authentication is not needed for ldap server connections. If it is set to
autodetect then the ldap server will be queried to establish a suitable sasl
-authentication mechanism. If no suitable mechanism can be found, connections
+authentication mechanism. If no suitable mechanism can be found, connections
to the ldap server are made without authentication. Finally, if it is set to
simple, then simple authentication will be used instead of SASL.
.TP
--- autofs-5.1.4.orig/man/automount.8
+++ autofs-5.1.4/man/automount.8
@@ -89,7 +89,7 @@ that would be used by autofs for the who
.TP
.I "\-O, \-\-global-options"
Allows the specification of global mount options used for all master
-map entries. These options will either replace or be appened to options
+map entries. These options will either replace or be appended to options
given in a master map entry depending on the APPEND_OPTIONS configuration
setting.
.TP
--- autofs-5.1.4.orig/modules/lookup_ldap.c
+++ autofs-5.1.4/modules/lookup_ldap.c
@@ -1320,11 +1320,11 @@ auth_fail:
ret |= get_property(logopt, root, "external_key", &extern_key);
/*
* For EXTERNAL auth to function we need a client certificate
- * and and certificate key. The ca certificate used to verify
+ * and certificate key. The ca certificate used to verify
* the server certificate must also be set correctly in the
* global configuration as the connection must be encrypted
* and the server and client certificates must have been
- * verified for the EXTERNAL method to be offerred by the
+ * verified for the EXTERNAL method to be offered by the
* server. If the cert and key have not been set in the autofs
* configuration they must be set in the ldap rc file.
*/
--- autofs-5.1.4.orig/modules/replicated.c
+++ autofs-5.1.4/modules/replicated.c
@@ -24,11 +24,11 @@
* - PROXIMITY_OTHER, host is on a network not directlty
* reachable through a local interface.
*
- * 2) NFS version and protocol is selected by caclculating the largest
+ * 2) NFS version and protocol is selected by calculating the largest
* number of hosts supporting an NFS version and protocol that
* have the closest proximity. These hosts are added to the list
* in response time order. Hosts may have a corresponding weight
- * which essentially increaes response time and so influences the
+ * which essentially increases response time and so influences the
* host order.
*
* 3) Hosts at further proximity that support the selected NFS version
--- autofs-5.1.4.orig/redhat/autofs.conf.default.in
+++ autofs-5.1.4/redhat/autofs.conf.default.in
@@ -79,7 +79,7 @@ mount_nfs_default_protocol = 4
# are run as the privileded user this opens
# automount(8) to potential user privilege
# escalation when the program map is written
-# in a language that can load components from,
+# in a language that can load components from,
# for example, a user home directory.
#
# force_standard_program_map_env = no
@@ -87,7 +87,7 @@ mount_nfs_default_protocol = 4
# use_mount_request_log_id - Set whether to use a mount request log
# id so that log entries for specific mount
# requests can be easily identified in logs
-# that have multiple conncurrent requests.
+# that have multiple concurrent requests.
#
#use_mount_request_log_id = no
#
@@ -419,10 +419,10 @@ dismount_interval = 300
# appears to work reasonably well most of the time without the
# update).
#
-# autofs_use_lofs = yes
+#autofs_use_lofs = yes
#
# Several configuration options can be set per mount point.
-# In particulr map_type, map_name, map_defaults, search_path,
+# In particular map_type, map_name, map_defaults, search_path,
# browsable_dirs, dismount_interval and selectors_in_defaults
# (not all of which are currently implemented, see above).
#
@@ -431,6 +431,6 @@ dismount_interval = 300
# master map entry and the format will be inherited for type
# "auto" mounts.
#
-# [ /expamle/mount ]
-# dismount_interval = 60
-# map_type = nis
+#[ /example/mount ]
+#dismount_interval = 60
+#map_type = nis
--- autofs-5.1.4.orig/redhat/autofs.sysconfig
+++ autofs-5.1.4/redhat/autofs.sysconfig
@@ -1,5 +1,5 @@
#
-# Init syatem options
+# Init system options
#
# If the kernel supports using the autofs miscellanous device
# and you wish to use it you must set this configuration option
--- autofs-5.1.4.orig/samples/autofs.conf.default.in
+++ autofs-5.1.4/samples/autofs.conf.default.in
@@ -78,7 +78,7 @@ browse_mode = no
# are run as the privileded user this opens
# automount(8) to potential user privilege
# escalation when the program map is written
-# in a language that can load components from,
+# in a language that can load components from,
# for example, a user home directory.
#
# force_standard_program_map_env = no
@@ -86,7 +86,7 @@ browse_mode = no
# use_mount_request_log_id - Set whether to use a mount request log
# id so that log entries for specific mount
# requests can be easily identified in logs
-# that have multiple conncurrent requests.
+# that have multiple concurrent requests.
#
#use_mount_request_log_id = no
#
@@ -430,6 +430,6 @@ dismount_interval = 300
# master map entry and the format will be inherited for type
# "auto" mounts.
#
-# [ /expamle/mount ]
-# dismount_interval = 60
-# map_type = nis
+#[ /example/mount ]
+#dismount_interval = 60
+#map_type = nis