- Correctly inform the user once about obsolete parm/conf file options on
s390 (maier)
- Handle activation of DASDs in linuxrc.s390 since loader no longer works
(maier)
- make IPv4 configuration in linuxrc.s390 compatible with NM in loader
(maier)
- suggest disabled X11-forwarding for ssh login in linuxrc.s390 (maier)
- Fix an erroneous "!" in the test for doKill, and make reboot explicit.
(pjones)
- Honor network config boot params for CD-booted ks installs (#433214)
(dcantrell)
- Include ipcalc command in all initrd.img files, not just s390 (#516084)
(dcantrell)
- Don't to unmount /mnt/source unless something's mounted there (#516304).
(clumens)
- Honor nodmraid commandline option (#499733) (hdegoede)
- Don't try to multipath CD devices. (#516362) (pjones)
- booty: Do not strip the trailing p from a devicename like
mapper/isw_Vol0_tmp (hdegoede)
- booty: isw_Vol0_Stripe is not a disk isw_Vol0_Stri with an e part
(#505205) (hdegoede)
- Avoid finding the word 'engine' in comments. (jkeating)
- Don't try to get dso deps of statically linked files. (jkeating)
- Call shutDown() correctly for s390 (karsten)
- Remove unused variable from loader/loader.c (karsten)
- Delete unpackaged files on non-livearches. (karsten)
- Do not set parted.PARTITION_BOOTABLE on s390. (root)
- Complete udev setup in linuxrc.s390 for automatic module loading (root)
- Recognize mpath devices when we see them. (pjones)
- Make DiskDevice.partedDisk a property. (pjones)
- Make questionInitializeDisk() somewhat less ugly. (pjones)
- Add a description to DiskDevice, and use it in the UI. (pjones)
- Get rid of Device.description, it is unused. (pjones)
- Close the opened file descriptors when necessary. (#499854) (jgranado)
- Add the glade files to the install image so save-to-bugzilla works
(#515444). (clumens)
- New system-config-keyboard has a different version then I expected
(hdegoede)
- Add scripts/makeupdates to generate updates.img files. (dcantrell)
- Add python-decorator to the stage2 image for pyparted (#513175). (clumens)
- Set stage2= on x86 boot.iso (katzj)
- Try to auto-find the CD even if stage2= is specified (katzj)
- Make sure we have a device before check if it's protected. (#510033)
(dlehman)
- Remove unresolvable file devices from the devicetree. (#503830) (dlehman)
- Support multiple fstab entries of a single nodev fstype. (#505969)
(dlehman)
- Refer to nodev devices as "none", not "nodev". (dlehman)
- Change DeviceTree.devices from a dict to a list. (dlehman)
- Show locked LUKS devices as "Encrypted (LUKS)", not "LUKS". (dlehman)
- Allow creation of four primary partitions on a disk. (#505269) (dlehman)
- Add a bunch more stuff to the initrd needed for networking. (clumens)
- Add more things to /sbin on the initrd that udev requires. (clumens)
- Add dmesg to the images. (clumens)
- Set GECOS field for new user accounts specific in ks files (dcantrell)
- Show MAC address of network device in text mode too. (rvykydal)
- Fix selection of alternative iface in UI after fail (#507084). (rvykydal)
- Stop the cdrom device before ejecting (#505067) (msivak)
- Add hipersockets to NETTYPE description (bhinson, #511962). (clumens)
- Don't show formatting progress bar after mkfs has exited. (eric_kerin)
- Run firstaidkit-qs script instead of the shell (shows rescue menu)
(#508512) Add dialog package required for firstaidkit Create /etc/fstab in
ramdisk to make mount commands easier (#440327) (msivak)
- When ignoring partitions make sure lvm also ignores them (hdegoede)
- 70-anaconda.rules: pass --ignorelockingfailure to lvm invocation (hdegoede)
- Call mdadm -I with --no-degraded for all disks but the last (hdegoede)
- There is no /bin on the initrd so sleep needs to go into /sbin. (clumens)
- Add deviceNameToDiskByPath(). (dcantrell)
- Display drive model and size in MB in partitioning UI (#460697) (dcantrell)
- Lots of small grammar and wording changes. (pjones)
- Edit user-visible dialogs for style. (pjones)
- Get rid of sloppy elipses usage. (pjones)
- Don't write optical devices to /etc/fstab (#505697). (clumens)
- error messages of zFCP on s390: log or pass to the UI (maier)
- correctly delete a SCSI device provided by a zFCP LUN on s390 (maier)
- All other teardown methods take a "recursive" argument (#506166). (clumens)
- Clean yum caches following preupgrade, too (#503096). (clumens)
- mdmon added to install.img (Jacek.Danecki)
- Remove some unnecessary code. (clumens)
- Use a method yum provides, rather than inventing our own. (clumens)
- Remove _catchallCategory. yum handles this for us now. (clumens)
- Write out NM_CONTROLLED=no for NICs used for FCoE (hdegoede)
- Add support for biosraid using mdadm (hdegoede)
- Reverse: "Support for MD containers" (hdegoede)
- When all udev_is-foo() checks fail return instead of backtracing (hdegoede)
- 70-anaconda.rules: always import blkid output (hdegoede)
- Make sure to have "self" as an argument. (clumens)
- Add kickstart fcoe command (hdegoede)
- Use the yum preconf object to do $releasever substitution. (clumens)
- Indicate LV status according to lv_attr active bit (#491754) (dcantrell)
- Include lv_attr in lvm.lvs() return value. (dcantrell)
- Fix list of 64-bit arches. (notting)
- We also need -DUSESELINUX if we want to call matchPathContext. (clumens)
- Clean up some arch code. (notting)
- Update /etc/hosts with hostname for loopback IP address (#506384)
(rvykydal)
- Add missing LAYER2 and PORTNO handling for s390x. (dcantrell)
- Ignore configure.ac when generating updates.img (dcantrell)
- AC_ARG_WITH -> AC_ARG_ENABLE (dcantrell)
- dhclient now reads config files from /etc/dhcp (dcantrell)
- no "rhgb quiet" on s390 to enable visible boot progress and system
automation (#509881) (maier)
- fix backtrace in s390 reipl support due to missing anaconda.id.fsset
(#509877) (maier)
- Put sleep in /bin on the initrd (#505639). (clumens)
- Also include the grep programs. (clumens)
- Add programs from vim-minimal, coreutils, and util-linux-ng. (clumens)
- Move programs that aren't s390-specific into the main image. (clumens)
- Look for /bin/sh, not /sbin/busybox. (clumens)
- No longer symlink binaries to busybox. (clumens)
- No longer require busybox. (clumens)
- LVMVolumeGroupDevice stores pesize in MB, kickstart expects it in KB.
(dlehman)
- Don't schedule a format resize if reformat scheduled. (#500991) (dlehman)
- Deactivate md arrays regardless of state if the device is present.
(#496441) (dlehman)
- Lame hack to make sure --size= is never 0 (#500905). (clumens)
- Don't filter out partitions that haven't been allocated (#500932).
(clumens)
- Write out PE size as an integer, since that's what anaconda wants
(#501049). (clumens)
- Set clearPartType to None on preupgrade too (#499321). (clumens)
- Fix indentation of line to remove cancelled actions from the list.
(#500932) (dlehman)
- Consider active-idle state of md device as accepatable status of device
(#497407) (rvykydal)
- Fix detection of cciss disks (#499408) (dchapman)
- Get existing fs size for xfs. (dcantrell)
- Get existing fs size for ntfs. (dcantrell)
- Get existing fs size for jfs. (dcantrell)
- Get existing fs size for ext2, ext3, and ext4. (dcantrell)
- Compute existing filesystem size using fs info utility. (dcantrell)
- Do not allow users to migrate ext4 to ext4. (dcantrell)
- Correct handling of formats on encrypted preexisting LVs. (#499828)
(dlehman)
- Ignore unrecognized device-mapper devices we find. (#499967) (dlehman)
- loader: Mount /tmp as tmpfs not ramfs so we can swap it out (ajax)
- format.mountpoint -> lvd.mountpoint (#500913). (clumens)
- Treat the loop labels as devices without a label.(#493219) (jgranado)
- Add the partition table partition after initializing (#498602). (clumens)
- Add a Mac OS boot line to yaboot.conf (#499964). (clumens)
- Catch IOError when enabling repos (#500439). (clumens)
- Use a newer version of the kickstart Partition command. (clumens)
- Fix a traceback when installing over previous installs on PPC (#499963).
(clumens)
- Fix a typo when probing exception disks. (clumens)
- Add support for --noformat too. (clumens)
- Add support for --onpart, --ondrive, and --useexisting. (clumens)
- Make the storage.writeKS method useful and called from instdata (#493703).
(clumens)
- Add writeKS methods to the device objects. (clumens)
- Add writeKS methods to all the format objects. (clumens)
- upd-instroot: Add gdbserver (ajax)
- Remove text-mode syslinux help (katzj)
- If clearPartType is None, don't attempt to clear a device (#499321).
(clumens)
- Only set clearpart data if the command was provided in the kickstart file.
(clumens)
- Override previously defined mountpoints in kickstart (#499746). (clumens)
- Yet another font package name has changed (#499322). (clumens)
- Set new mountpoint correctly for existing encrypted LVs. (#496363)
(dlehman)
- Once a partition is part of another device it cannot be modified.
(#496760) (dlehman)
- Maintain request sort order by using req_disks instead of parents.
(dlehman)
- Do not set a parent on the /mnt/sysimage/dev bind mount object (#499724).
(clumens)
- Skip .pyc files in subdirectories when running make updates. (clumens)
- Remove 'lowres' option. (ajax)
- Run tune2fs on newly formatted ext[34] filesystems. (#495476) (dlehman)
- Don't clear the first partition on any disk with a Mac disk label
(#492154). (clumens)
- Add detailedMessageWindow to the cmdline class (#499700). (clumens)
- Don't traceback when a freespace partition is present (#499662). (clumens)
- Do nomodeset when doing xdriver=vesa (ajax)
- Fix calculation of smallest PV's size in the lvm dialog. (#493753)
(dlehman)
- Fix KeyError when partition numbers change during allocation. (#497911)
(dlehman)
- Update EFI CD booting code in mk-images (pjones)
- Collect network interfaces from NetworkManager (#493995) (dcantrell)
- Handle fstab entries whose filesystem we don't recognize.(#498120)
(dlehman)
- Add an error signifying an unrecognized entry in /etc/fstab. (dlehman)
- Don't drop discovered format with unknown devices when parsing fstab.
(dlehman)
- Fix display of paths for device-mapper device in bootloader widget.
(dlehman)
- Don't call udevDeviceFormat if we're just going to clear the device
(#497323). (clumens)
- Pass clearPartType to the devicetree as well. (clumens)
- Break the complex should-clear logic out of clearPartitions. (clumens)
- Handle clearpart in the early kickstart pass too. (clumens)
- Correct setting the SELinux context on mountpoints (#494995). (clumens)
- make resetFileContext return the context set (wwoods)
- Allow editing of the hdiso source partition so it can be mounted
(#498591). (clumens)
- Add a ignoreProtected= parameter to deviceImmutable that does the obvious.
(clumens)
- Be more aggressive unmounting before install starts (#498260) (katzj)
- Add %{?dist} to the release number in the spec file. (dcantrell)
- Configure network in kickstartNetworkUp() iff NM is not connected
(#490518) (dcantrell)
- Don't segfault with "ks someotherparam" (#498307). (clumens)
- Fix the arch upgrade check in yuminstall.py, too (#498280). (clumens)
- Move _resetRpmDb into iutil so we can access it everywhere. (clumens)
- Don't mount bind mounts last, that makes /dev break. (pjones)
- Pass anaconda to storage.FSSet.turnOnSwap. (dlehman)
- Ignore spurious formatting on partitioned devices. (dlehman)
- Revert "DeviceError only returns a message, not (message, device) tuple
(#496343)." (dlehman)
- Fix action sorting for partitions on the same disk. (#498064) (dlehman)
- Fix traceback in second editing of existing raid dev (#497234). (rvykydal)
- Allow existing LVs with filesystems to be resized (#490913) (dcantrell)
- Rate limit pulse() calls to ProgressWindow. (pjones)
- Don't populate flags.cmdline with "True" values when no = is used. (pjones)
- Add "nomodeset" to the list of command line arguments copied to grub.conf
(pjones)
- Use device.format.mountType insead of device.format.type for fstab.
(pjones)
- Initialize x86 class variables before efiBootloaderInfo.__init__() (pjones)
- Fix a segfault on nfs+kickstart (pjones)
- Fix an error when raising FormatCreateException. (clumens)
- Add more windows to the rescue interface class (#498014). (clumens)
- Remove requirement for EFI machines to be x86, since IA64 is too
(#497934). (clumens)
- Fix the kernel package selection on ppc64 machines (#497264). (clumens)
- Include fsck.ext4 and mkfs.ext4 in the images (#497996). (clumens)
- Properly restore SIGCHLD if X startup fails (wwoods)
- Fix kickstart PV references handling for lvm on raid (#497352). (rvykydal)
- Clean up argument list after changing from rhpl to iutil for
execWithRedirect (jkeating)
- Fix NameError traceback setting up bootloader in EFI installs (wwoods)
- No longer force ISOs to be on ext2, ext3, or vfat partitions. (clumens)
- Sending translation for German (ckpinguin)
- Split text mode exn saving into multiple screren (#469380). (clumens)
- Copy /tmp/program.log to /mnt/sysimage/var/log/. (clumens)
- Fix member preselection in raid UI. (rvykydal)
- Fix editing of raid device (persistence of level choice) (#496159)
(rvykydal)
- Fix ks --useexisting and --noformat options of logvol and volgroup
(rvykydal)
- Make sure inconsistencies dont screw us up. (jgranado)
- Re-implement the inconsistency functionality. (jgranado)
- Allow the use of "-" in the lvm names. (495329) (jgranado)
- Make sure we "insist" on mdadm commands. (491729) (jgranado)
- [PATCH] Possible fix for some encryption related bugs during the Custom
Layout editation (#495848) (msivak)
- Make sure we have a clean lvm ignore list when we initialize. (jgranado)
- We need to search by name without the "mapper" prefix. (jgranado)
- Create a min_max constraint to avoid alignments issues. (jgranado)
- Don't exit the installer from filesystem errors. (dlehman)
- Try not to raise exceptions from minSize calculators. (dlehman)
- Don't traceback when PVs are encrypted or are not partitions. (dlehman)
- Adjust device dependencies when backing out device encryption. (#493257)
(dlehman)
- Include filesystem type in mount log message. (dlehman)
- Load filesystem modules on demand (#490795, #494108). (clumens)
- Use existing partitions when --onpart is used for PVs or raid members
(#493065) (rvykydal)
- Raise message, not exception when size set in LV dialog is too big.
(rvykydal)
- Raise an error when remofing an extended part with logical parts.
(jgranado)
- Esthetic changes to storage/partitioning.py. (jgranado)
- dmraid.py is no longer being used by anything, so remove it. (clumens)
- Remove partedUtils.py. (clumens)
- This is the only place isEfiSystemPartition is used, so pull it in.
(clumens)
- getReleaseString now lives in the storage module. (clumens)
- Stop lying about our support for dmraid and multipath in kickstart.
(clumens)
- Remove some old, unused code that also uses biosGeometry. (clumens)
- For very small disks, don't try to display a stripe in the graph
(#480484). (clumens)
- Fix reading the console= parameter from the cmdline (#490731). (clumens)
- For dmraid partititons device node name != name (hdegoede)
- When a partition request gets unallocated, set the name back to req#
(hdegoede)
- Do not use getPartitionByPath() in allocatePartitions() (hdegoede)
- Remove no longer used iscsi_get_node_record function (hdegoede)
- Try to handle devices which live in a subdir of /dev properly (hdegoede)
- Split DeviceTree.addUdevDevice into several smaller methods. (dlehman)
- Don't traceback from failure finding minimum fs size. (#494070) (dlehman)
- udev_settle after format teardown to avoid EBUSY on device teardown.
(#492670) (dlehman)
- Add a parted.Device attribute to all existing StorageDevices. (dlehman)
- If no partitioning commands are given, apply the UI selections (#490880).
(clumens)
- Update font package names for ml_IN, si_LK, etc. (#493792, #493794).
(clumens)
- Fix a typo in the city name for Nepali (#493803). (clumens)
- Fix writing out the partition= line on PPC (#492732). (clumens)
- Do not check size when adding LV to growing VG (bug #492264) (rvykydal)
- Don't let device names affect action order in general case. (dlehman)
- Round up when aligning to pesize for space used. (#493656) (dlehman)
- Improve handling for various nodev filesystems in fstab. (#493685,
#493202) (dlehman)
- Present the correct max lv size in the dialog. (dlehman)
- Use the head of the current branch, not master, for scratch archives.
(dlehman)
- Make a top level StorageError that all others are based on. (dlehman)
- Remove unused PRePDevice class. (dlehman)
- Make the disk model an attribute of DiskDevice. (dlehman)
- Handle format actions in cancelAction() (dcantrell)
- Fix format check box for pre-existing partitions (#491675) (dcantrell)
- Remove temporary directory used in _getExistingSize() (dcantrell)
- Activate storage before looking up the hdiso source drive (#491781).
(clumens)
- Remove isys.getDeviceByToken since it is no longer used. (clumens)
- Don't allow the rootfs on live installs to not match (#493206, #492727)
(katzj)
- Create setup and teardown functs for dmraid devs. (jgranado)
- put xfs back where it belongs (sandeen)
- Fix up the other caller of unmountCD to pass in a device (#493537).
(clumens)
- Start with a basic /etc/hosts file (#491634) (dcantrell)
- Do not flag every existing partition for resize (#491803) (dcantrell)
- Remove unused noformatCB() function. (dcantrell)
- Remove unnecessary istruefalse() function. (dcantrell)
- Build new _isys.so for updates.img if needed. (dcantrell)
- Get the UUID of each md array we create. (#491796) (dlehman)
- Call udev_settle after committing changes to a disk (#491529) (hdegoede)
- Be a little bit smarter about allocating space to grow parts. (#491761)
(dlehman)
- Check that partition is on the disk before trying to remove it. (#491997)
(dlehman)
- Work around a bug in mdadm incremental assembly. (dlehman)
- Use the same units (MB) for extent size that we do for everything else.
(dlehman)
- Put line breaks in between crypttab entries. (#491938) (dlehman)
- Register the NoDevFS class. (clumens)
- fslabels -> labels. (clumens)
- NFSDevice does not take exists= as a parameter. (clumens)
- Override _setDevice and _getDevice in NFS. (clumens)
- Move resolveDevice into the DeviceTree class. (clumens)
- Move most of the parseFSTab logic into its own function. (clumens)
- We don't even use partedUtils in this module. (clumens)
- PReP formats can never be active. (#491865) (dlehman)
- Move protectedPartition setup into storageInitialize (#491781). (clumens)
- Use the mount and unmount methods on OpticalDevice.format now. (clumens)
- Add a format for ISO9660 filesystems. (clumens)
- getDeviceByName does not expect the CD device to start with "/dev/"
(#491768). (clumens)
- Write the same arch to .discinfo as iutil.getArch() gives us (#490977).
(clumens)
- Don't remove partitions twice. (jgranado)
- Add EFI, Apple Bootstrap, and PPC PReP Boot formats. (dlehman)
- Remove all implicit calls to self.format.destroy from Device classes.
(dlehman)
- Pop the busy cursor when we're done with the wait window (#491736).
(clumens)
- If the new size and old size are the same, treat as a no-op (#491496).
(clumens)
- Let mountFilesystems handling bind mounting /dev (#490772). (clumens)
- Not all FileDevices have parents, so don't assume. (clumens)
- Bind mount formats are mountable. (clumens)
- If a filesystem is already mounted, don't raise an error. (clumens)
- Fix a typo calling the superclass's constructor. (clumens)
- Add a fake device for bind mounting /dev. (clumens)
- If there was an exception leading to the urlgrabber error, log it.
(clumens)
- Fix the import of checkbootloader (#491574). (clumens)
- Add a missing import (#491605). (clumens)
- Fix traceback in FSSet.crypttab. (#491160) (dlehman)
- Fix traceback on upgrade. (#491446) (dlehman)
- Do not include .h and .sh files in updates.img (dcantrell)
- Make PartitionDevice resize work. (dcantrell)
- Reset mouse pointer if we find an unreadable disk. (dcantrell)
- Use label attr instead of non-existent fslabel attr. (#491120) (dlehman)
- Need to notify the kernel of changes before udev settle (katzj)
- Revert "mount and umount commands are in /sbin now, remove from /usr/sbin"
(dcantrell)
- Make some fixes to the rescue mode system selection UI (#489973, #489977).
(clumens)
- Fix text mode autopartitioning (#491282). (clumens)
- Do not use _rnetdev as fstab option for network based / (hdegoede)
- Make root= line in grub.conf and path spec in fstab consistent (hdegoede)
- Fix a reference to the partitions list (#491335). (clumens)
- Do not traceback at the very beginning of rescue mode (msivak)
- Fix traceback when editing encrypted mdraid device in UI. (rvykydal)
- Catch FSError when detecting storage, prevent user from continuing.
(dcantrell)
- If we have no error string, place None in the tuple. (dcantrell)
- Move OUTPUT_TERMINAL definition to isys.h (dcantrell)
- mount and umount commands are in /sbin now, remove from /usr/sbin
(dcantrell)
- Avoid SIGSEGV in doPwMount() when NULL is last parameter (#491192)
(dcantrell)
- Attempt disk commits 5 times before raising an exception. (dcantrell)
- Add boot partition size limit properties and size validation method.
(dlehman)
- Make sure boot flag gets set. (#491170) (dlehman)
- Make bootable a property of PartitionDevice. (dlehman)
- After setting up our random UUID, inform the storage layer (katzj)
- Handle system crappyness. (jgranado)
- Fix up checking for live image backing (katzj)
- Let's not remove our mountpoints (katzj)
- Fix writing the default= line in grub.conf (#490756). (clumens)
- Revert "Fix pruning of destroy actions for preexisting devices." (dlehman)
- Add more blacklisting (katzj)
- Blacklist the live image backing device (katzj)
- Move blockdev blacklisting to be a function (katzj)
- Inhibit devkit-disks during a live install (katzj)
- try to unmount everything from /media on live installs (katzj)
- Fix live installs to not traceback (katzj)
- Fix New partition in UI (rvykydal)
- Rework the lvm dialog. (#490301,#490966,#490681,#489870) (dlehman)
- Improve chances of uniqueness from Storage.createSuggestedLVName. (dlehman)
- Fix pruning of destroy actions for preexisting devices. (dlehman)
- Devices should not be resizable unless they exist. (dlehman)
- Try to activate an existing md array after adding each member. (dlehman)
- Indicate filesystem is mountable if we have a mount command. (dcantrell)
- Mount existing filesystems read-only when getting size. (dcantrell)
- Fix some errors in the updates target. (dcantrell)
- Place all mount.* commands in /sbin (dcantrell)
- Fix error message reading and writing in doPwMount() (dcantrell)
- Use booleans in isys.mount() and isys.umount() (dcantrell)
- Add a FIXME comment for setting uuid in VG / LV create (hdegoede)
- Do not traceback when writing anaconda.ks with iscsi with auth info.
(hdegoede)
- Do not write LV uuid to grub.conf, but the filesystem uuid (hdegoede)
- If a mountpoint depends on a network disk at _netdev to its fstab options
(hdegoede)
- Do not hang when creating raid array with member having filesystem
detected (#490891) (rvykydal)
- Destroy and create luks child of raid array too when editing in UI.
(rvykydal)
- Editing non-existent raid device by destroying and creating actions
(rvykydal)
- actionDestroyFormat call takes device, not format (rvykydal)
- Fix getChildren call in partition UI (rvykydal)
- Fix removing of devices with the same name from tree when adding
create action. (rvykydal)
- Do not duplicate requested minor number in edit raid UI list. (rvykydal)
- Offer available partitions when editing non-preexisting raid request.
(rvykydal)
- Don't try to fit the whole StorageDevice.__str__ output into the UI
(#490406). (clumens)
- Make PartitionDevice handle both normal and dmraid partitions (hdegoede)
- Stop overriding __init__ in DMRaidPartitionDevice (hdegoede)
- Set format UUID after creating a format (hdegoede)
- Fix result of updateSysfsPath to be consistent with initial sysfsPath
values (hdegoede)
- Use getDevicesByInstance() for storage.partitions (hdegoede)
- We no longer use iscsiadm anywhere (hdegoede)
- Typo fix. (clumens)
- Make platform.checkBootRequest work better and not use diskset anymore. (clumens)
- Fix a traceback when looking for PS3 boot partitions (#490738). (clumens)
- FormatArgs -> FormatOptions (#490737). (clumens)
- Fix ppoll() timeout=infinity usage in auditd (#484721). (pjones)
- Simplify kernel package selection. (clumens)
- Look at CPU flags instead of /proc/iomem to determine PAE-ness (#484941). (clumens)
- Tell NM not to touch interfaces when / is on a network disk (hdegoede)
- Get iscsi going with the new storage code (hdegoede)
- Use minihal instead of isys.hardDriveDict in list-harddrives (#488122). (clumens)
- storage.disks never includes disks without media present. (clumens)
- Changed the getDevicebyLabel() to getDeviceByLabel() in devicetree.py (mgracik)
- Don't use disk.maximizePartition anymore. (dlehman)
- Only schedule implicit format destruction if there is formatting to
destroy. (dlehman)
- Reset encryptionPassphrase when we reset the rest of storage. (dlehman)
- Do not create a LUKSDevice if we do not have a way to map the device.
(dlehman)
- Fix handling of new extended partitions during partition allocation.
(dlehman)
- Fix bug in dependency list for partitions. (dlehman)
- Fix inconsistency in variable use in search for free space. (dlehman)
- Check for disk name being in disk.name not in clearPartDisks (dcantrell)
- Create a Makefile target to generate updates.img automatically. (dcantrell)
- When creating free space, handle cases other than clearpart --drives=
(clumens)
- Ignore loop and ram devices (hdegoede)
- devicetree: fix slave addition of incomplete dm / md devices (hdegoede)
- Catch LVMErrors too when tearing down devices (hdegoede)
- Install udev rules in /lib/udev/rules.d instead of in runtime dir
(hdegoede)
- Ignore disk devices with missing media (#488800). (clumens)
- Use correct parse method for the upgrade command (#471232) (wwoods)
- Fix creation of fs options for preexisting encrypted devices. (dlehman)
- Fix lots of buggy behavior in the partition dialog. (dlehman)
- Handle FTP servers that both want and don't want PASS after USER
(#490350). (clumens)
- Fixed the names of the variables for lvm.py functions. (mgracik)
- editPartitionRequest -> editPartition in iw/partition_gui.py (#490384).
(clumens)
- clampPVSize -> clampSize in lvm.py (#490295). (clumens)
- Fix the obvious and stupid typo (#490296). (clumens)
- isys.umount removes mount directory by default (rvykydal)
- Fix tempfile.mkdtemp call. (rvykydal)
- Initialize attribute _mountpoint before using it (rvykydal)
- devicetree.py has _ignoredDisks instead of ignoredDisks. (jgranado)
- Create separate resize actions for formats and devices. (dcantrell)
- Use os.statvfs() to get existing filesystem size. (dcantrell)
- Add resizeArgs for Ext2FS and fix it for BtrFS. (dcantrell)
- Report when we cannot find any free space partitions. (dcantrell)
- Improve resizeDialog text. (dcantrell)
- Raise FSResizeError if filesystem cannot be resized. (dcantrell)
- Handle resizing when setting targetSize for PartitionDevice (dcantrell)
- Let users set the size property of StorageDevices. (dcantrell)
- Add support for kickstart's '--initlabel' option to clearpart. (dlehman)
- Fix display of LV format type for encrypted LVs. (dlehman)
- Make paths somewhat flexible so we'll work in normal environments.
(dlehman)
- Fix supportable attribute for cmdline-enabled fstypes. (dlehman)
- Access private attribute for luks dict. (dlehman)
- Schedule format create for newly encrypted preexisting partition. (dlehman)
- Don't traceback if vg.teardown fails in recursive teardown. (dlehman)
- Schedule format create action for newly encrypted preexisting LV. (dlehman)
- Make sure we return something other than None for new requests. (dlehman)
- Add __str__ methods to Device objects. (clumens)
- Add mediaPresent and eject to the OpticalDevice class. (clumens)
- Use the right import path for checkbootloader (#490049). (clumens)
- Rename /etc/modprobe.d/anaconda to /etc/modprobe.d/anaconda.conf (clumens)
- Don't clear partitions containing the install media. (dlehman)
- Wait til everyone knows the format/fs is no longer active. (dlehman)
- Save a copy of the device stack so we can destroy the format. (#489975)
(dlehman)
- Add a deep copy method to Device since we can't just use copy.deepcopy.
(dlehman)
- Fix infinite loops in partition screen populate. (#490051) (dlehman)
- Default to a name based on the uuid for existing luks mappings. (dlehman)
- Use the correct keyword for luks map names ('name', not 'mapName').
(dlehman)
- Fix getting of number of total devices of sw raid. (rvykydal)
- Only select the Core group in text mode (#488754). (clumens)
- Added test case for devicelib mdraid.py. (mgracik)
- Add created user to default group created for the user. (rvykydal)
- Fix editing of existing logical volume. (rvykydal)
- Add a list that lvm should ignore. (jgranado)
- Don't create a PartitionDevice for devices that do not exist (#489122).
(clumens)
- A getter doesn't usually take a parameter (#489965). (clumens)
- Do not write "Running..." to stdout, as that could be tty1. (clumens)
- Call storage.exceptionDisks, not diskset.exceptionDisks. (#489615)
(dlehman)
- Fix typo. (jgranado)
- Fix typo. (dlehman)
- Add udev rules for handling for mdraid arrays. (dlehman)
- Honor the zerombr kickstart directive. (dlehman)
- currentSize is expected to be a float, so convert it to one (#489882).
(clumens)
- It's clearPartDisks, not clearPartDrives. (clumens)
- Get rid of the mappings and ksID as well. (clumens)
- Make sure the device has a diskType before attempting to check what it is.
(clumens)
- Update the volgroup command to work with the new storage code. (clumens)
- Update the raid command to work with the new storage code. (clumens)
- Update the part command to work with the new storage code. (clumens)
- Update the logvol command to work with the new storage code. (clumens)
- addPartRequest is no longer needed. (clumens)
- Don't set default partitioning in every kickstart case. (clumens)
- Clear partitions before scheduling requests. (clumens)
- Always go through doAutoPart. (clumens)
- Format modules import fix (mgracik)
- Fixed the format modules import (mgracik)
- Allow overriding the anaconda udev rules from an updates.img (hdegoede)
- If a pv somehow does not contain a vg_name, do not try to get other vg
info (hdegoede)
- Fix a few bugs in the lvm dialog. (#489022) (dlehman)
- Modify livecd.py to work with new storage backend. (dlehman)
- Be explicit about resetting Disks' partedDisk attribute. (#489678)
(dlehman)
- Deactivate devices after we've finished scanning them. (dlehman)
- Handle the case of removing an unallocated partition from the tree.
(dlehman)
- Try again to set up LVs when we've just added a new PV to the VG. (dlehman)
- Set partition flags in format create/destroy execute methods. (dlehman)
- Make sure we use the newly committed parted.Partition after create.
(dlehman)
- Make device teardown methods more resilient. (dlehman)
- Initialize storage in rescue mode so we can find roots (#488984). (clumens)
- We also need to pack up the extra args tuple, too. (clumens)
- doLoggingSetup keeps growing new arguments, so put them into a dict
(#489709). (clumens)
- Fix anaconda udev rules to not require pre-existing device nodes (hdegoede)
- Hook up 'Shrink current system' dialog to new storage code. (dcantrell)
- Fix _getCheckArgs() in class FS. (dcantrell)
- Fix action pruning to handle more complex scenarios. (dlehman)
- Schedule destruction of any existing formatting along with the device.
(dlehman)
- Add a size attribute to mdraid arrays. (dlehman)
- Speed up partitioning screen redraws by trimming workload where possible.
(dlehman)
- Create partitions with exactly the geometry we calculate. (dlehman)
- Fix name collision between formats.mdraid and devicelibs.mdraid. (dlehman)
- Destruction of the member device formatting will be handled elsewhere.
(dlehman)
- Fix a typo (jkeating)
- Fix pruning between two destroy actions on the same device (rvykydal)
- Use the pyblock functions when possible. (jgranado)
- We are searching a list, not a dict now (rvykydal)
- Move the recursive teardown of all devices out of processActions. (dlehman)
- Clean up handling of /proc, /sys, /dev/pts, /dev/shm entries. (dlehman)
- Fix several minor bugs preventing upgrade/rescue mount. (#488946) (dlehman)
- Only populate the device tree on demand. (dlehman)
- Prune actions by device based on path, not object-id. (dlehman)
- Rewrite action sort so it works correctly. (dlehman)
- Do a separate disk.commit for each partition add/remove. (dlehman)
- Fix bug keeping track of best free region/type/disk info. (dlehman)
- Return early if doAutoPart is False, but clearpart first if kickstart.
(dlehman)
- Recognize PS3 as a valid machine type (#489263). (clumens)
- Move the mdRaidBootArches logic into the platform module. (clumens)
- stdout and stderr may also need to be created. (clumens)
- Fix booty for dmraid (hdegoede)
- It's self.origrequest, not self.origreqest (#489036). (clumens)
- Added crypto.py unittest; Updated devicelibs tests baseclass.py and lvm.py
(mgracik)
- Start storage before parsing the kickstart file. (clumens)
- Make sure autopart without any clearpart command will fail. (clumens)
- Update storage flag on ks autopart (rvykydal)
- Use correct storage attribute for ks clearpart (rvykydal)
- Catch the new _ped.DiskLabelException for unrecognized disklabels.
(dlehman)
- Catch all failures from making parted objects in exceptionDisks. (dlehman)
- various dmraid fixes. (jgranado)
- Implement the format disk question as a callback. (jgranado)
- Add dmraid functionality to new storage code. (jgranado)
- Do not pass None values into nonmandatory arguments, you are screwing the
default values.. (msivak)
- Schedule device destroy actions for partitions last. (dlehman)
- Pass storage.disks, not storage, to createAllowed.... (#488860) (dlehman)
- Nodev filesystems always exist. And the device is arbitrary. (dlehman)
- Include proc, &c filesystems in fstab and FSSet.{mount/umount}Filesystems.
(dlehman)
- Remove FSSet.writeFSTab. That job is handled elsewhere. (dlehman)
- Add properties to FSSet to provide the nodev entries. (dlehman)
- Fix incomplete format in Storage.deviceImmutable. (dlehman)
- Make sure we use the same disk the free space is on. (#488807) (dlehman)
- Prevent clobbering of name 'mdraid' by qualifying it. (dlehman)
- Handle unformatted disks and cdroms in Storage.exceptionDisks. (dlehman)
- Add resizeArgs property for resizable filesystems. (dcantrell)
- Fill out class NTFS a bit more. (dcantrell)
- Add fsckProg property to class FS. (dcantrell)
- Ext2FS.migratable(self) -> Ext2FS.migratable (dcantrell)
- Fix StorageDevice.minSize() and PartitionDevice.maxSize() (dcantrell)
- Center resize window on the screen. (dcantrell)
- Do not raise DeviceError if not bootable device is found. (dcantrell)
- Do an even more thorough job of ignoring disks libparted doesn't like.
(clumens)
- Fix a couple problems on the "Change device" bootloader dialog. (clumens)
- Fix a typo when writing out the mdadm config file. (clumens)
- Remove all uses of isys.cdromList, which no longer exists. (clumens)
- Check to see if we're on S390 on the congrats screen (#488747). (clumens)
- Handle non-fatal errors more gracefully in addUdevDevice. (dlehman)
- partRequests no longer exists, so don't try to import it (#488743).
(clumens)
- When building the exceptionDisks list, skip devices libparted doesn't
like. (clumens)
- Iterate over devicetree.devices.values, not devicetree. (dlehman)
- Add a get() method to Flags, since it pretends to be a dictionary.
(clumens)
- Stop with the fsset usage. (dlehman)
- Format message string after translation not before (msivak)
- We need newer python-cryptsetup because of the default values for cipher
and keysize for luskFormat (msivak)
- If a drive is not initialized, offer reinitialization or ignoring the
drive to the user (msivak)
- More syntax errors / traceback fixes (hdegoede)
- Fix syntax errors (rvykydal)
- Implement Storage.sanityCheck, mostly from old partitions code. (dlehman)
- Remove old content from utils/ (dcantrell)
- Ensure request.drive is always a list (#485622) (dcantrell)
- Pick up pyblock if it exists in block/ on an updates.img. (dcantrell)
- Don't check for a swapfs on things that aren't partitions (#485977).
(clumens)
- Perform ext3->ext4 filesystem migration if ext4migrate is given (#484330).
(clumens)
- Translate i?86 into i386 as a base arch. (jkeating)
- Teach upd-instroot about i586 arch, for sake of glibc.i586/openssl.i586
(jkeating)
- Fix the obvious typo. (clumens)
- filer.login raises an exception with it can't login, not returns None
(#486454). (clumens)
- Take into account that a parted.Partition's _fileSystem can be None
(#485644). (clumens)
- Fix indentation on upd-instroot (kanarip)
- Fix the indentation in mk-images (kanarip)
- Remove unused iface_netmask2prefix() function. (dcantrell)
- A parted.Disk has no attribute named "dev". It's named "device"
(#486007). (clumens)
- Use brandpkgname for the efi art too (katzj)
- Let's use the product string for a brandpackage name. (kanarip)
- Fix indentation in mk-images.efi (kanarip)
- Fix indentation in buildinstall script (kanarip)
- It's part.active, not part.is_active(). (clumens)
- File the basic traceback as the first comment instead of a generic
message. (clumens)
- Encode our upgrade policy in productMatches/versionMatches and enforce it.
(clumens)
- If we'd show package selection on kickstart installs, also show tasksel.
(clumens)
- If ks=nfs:... is given, don't try to find the file via boot options
(#480210). (clumens)
- Fix cdrom install on machines with no network devices (wwoods)
- updated fuzzy strings (jsingh)
- Use modinfo to find out what firmware we need in initrd (wwoods)
- Use the preconf object for yum configuration now (jantill). (clumens)
- Updated Dutch translation adn only 1 -fuzzy- string left (zuma)
- Add a boot target for the xdriver=vesa parameter and document it. (clumens)
- repo.proxy is now a property, so check before setting it (#481342).
(clumens)
- Workaround compile error due to (# 478663) (hdegoede)
- Various packaging fixed from review (#225246) (hdegoede)
- Show the header in certain non-lowres cases (#478765, alsadi AT
ojuba.org). (clumens)
- Remove doMultiMount. (clumens)
- Use mount -t auto instead of passing a list of valid fstypes (#477328).
(clumens)
- Fix case sensitivity when searching for headers (kanarip)
- Fix a traceback in checking for network install (ricky AT
fedoraproject.org). (clumens)
- Reduce direct D-Bus calls in isys/iface.c. (dcantrell)
- Allow 'ks' to function as it once did (#471812) (dcantrell)
- Fix telnet install support (#471082) (dcantrell)
- Call 'udevadm settle' instead of 'udevsettle'. (dcantrell)
- When using anaconda with kickstart file with UI mode - do not show the VNC
question (#476548) (msivak)
- Check error from asprintf() correctly for dhcpclass handling. (dcantrell)
- Use libnm_glib in net.c:get_connection() (dcantrell)
- Add libnm_glib CFLAGS and LIBS to loader's Makefile. (dcantrell)
- BR NetworkManager-glib-devel. (dcantrell)
- Only write the short hostname to the localhost line (#474086) (dcantrell)
- Updated Tajik Translation - Victor Ibragimov (victor.ibragimov)
- Copy /etc/dhclient-DEV.conf file to target system (#476364) (dcantrell)
- Use macros for D-Bus paths (dcantrell)
- Let X tell us when it's launched rather than just sleeping. (ajax)
- When there's no baseurl, set a default of [] instead of [''] (#476208).
(clumens)
- cracklib now raises exceptions on bad passwords (rzhou, #476312). (clumens)
- Make sure ssh doesn't get duplicated in the open port list (#474937).
(clumens)
- mdraid1: default to putting grub on partition instead of mbr (#217176)
(hdegoede)
- Don't install the games group as part of office/productivity (#472324).
(clumens)
- Don't dump encryption passphrases. (dlehman)
- Write anacdump.txt upon receipt of SIGUSR2 (from clumens). (dlehman)
- Use stacks instead of tracebacks in traceback handlers. (dlehman)
- Unmount swap devices when migrating filesystems, then reactivate
(#473260). (clumens)
- Handle both /dev/sr0 and sr0, since that's what cdromList gives (#475083).
(clumens)
- In iface_ip2str(), make sure to advance to next item before continue.
(dcantrell)
- We already have _GNU_SOURCE defined in Makefile.inc (dcantrell)
- Remove XXX comment in net.c about GATEWAY (dcantrell)
- Use strverscmp() from glibc in place of rpmvercmp() (dcantrell)
- Remove readLine() function from loader/loadermisc.c (dcantrell)
- Do not write SEARCH line to ifcfg-DEVICE file (#474858) (dcantrell)
- Preserve existing network configuration files during install (#461550)
(dcantrell)
- Send unique vendor class identifier unless user specifies one. (dcantrell)
- Avoid tracebacks when filling in static network config fields (#474275)
(dcantrell)
- Prevent network install when no network devices are found (#470144)
(dcantrell)
- Remove markup from text before printing it in cmdline mode (#470253).
(clumens)
- Move strip_markup() into iutil. (clumens)
- Fix up plural forms header so that python doesn't blow up for us (katzj)
- Change text to reflect Jesse's comments (katzj)
- Add support for the Tajik language (#455963). (clumens)
- Add a button to the UI to ignore all missing packages. (clumens)
- First small eu.po transtation, just to be sure that the system is set up
OK. (mikel.paskual)
- mini-wm: Turn on automatic window redirection. (ajax)
- Better naming for LVM volume groups and logical volumes (#461682)
(dcantrell)
- Partition requests can be None when populating the tree. (#474284)
(dlehman)
- Say we are unable to configure the network interface (#467960) (dcantrell)
- Match textw/network_text.py strings to iw/network_gui.py (#470145)
(dcantrell)
- In addSnap(), check snapshots for data key before continuing (#433824)
(dcantrell)
- Load FCP modules early for CD/DVD install (#184648) (dcantrell)
- Update mk-s390-cdboot.c to work with large kernel images (#184648)
(dcantrell)
- Make sure fstype exists before we try to test it (#473498). (clumens)
- Updated a small correction in kn locale (svenkate)
- Use modules.* files for finding modules of a type rather than modinfo
(katzj)
- Make complete text mention updates (#244431) (katzj)
- Make text for autopartitioning types clearer (#441350) (katzj)
- Allow installing grub on the MBR if /boot is on mdraid (#217176) (hdegoede)
- Fix some spelling errors in German translation (fabian)
- Make the required media dialog less wordy (#469557). (clumens)
- returnNewestByName now raises an error instead of returning [] (#472462).
(clumens)
- Fix death on login of an OLPC on a live image (katzj)
- Fix ld-*.so globbing for glibc-2.9 . (pjones)
- Do not bring up network for non-remote kickstart locations (#471658)
(dcantrell)
- Resolve dm-X devices returned by pvdisplay. (#448129) (dlehman)
- More shell script syntax fixing (katzj)
- Only bring up the network dialog on package failures if required
(#471502). (clumens)
- Don't have the key icon take up so much space on the LUKS dialog
(#470338). (clumens)
- Avoid getting linux-base in the kernel list (katzj)
- Deselect groups when we reset things also (#469854) (katzj)
- make iscsi login code wait for udev to create the devices (#466661,
#470073) (hdegoede)
- Set the correct path when using the directory chooser. (clumens)
- We always need a wait window, not just when the repo has a name. (clumens)
- Set initial state of IP configuration fields in text mode (#469933)
(dcantrell)
- Prevent traceback when there are no network devices (#469339) (dcantrell)
- Indentation fix. (pjones)
- Let users edit net settings on network failure in stage 1 (#465887)
(dcantrell)
- Move startNewt later to avoid printing extra messages on the screen
(#469687). (clumens)
- Revert "Make sure dialog deletions take effect sooner (#455676)." (clumens)
- Don't set up the launcher for the installer on XO (katzj)
- Whitespace cleanups for timezone.py (dcantrell)
- Do not store mount options in loaderData->instRepo (#467760) (dcantrell)
- Make sure we look up the IP address for the correct device (#469439)
(dcantrell)
- Remove unused bool() function. (dcantrell)
- Check for required space for / on live installs (#468867) (katzj)
- Add a basic method for checking the minimal size needed for a backend
(katzj)
- Fix typo that somehow snuck in (katzj)
- If there's no language selected, don't traceback (#469578). (clumens)
- Improve filtering of non-available groups (#469438) (katzj)
- filer.py: set defaultProduct in __init__ (hdegoede)
- Fix indentation error in filer.py (again) (hdegoede)
- Rebuild keymaps to get rid of trq.map (#469433). (clumens)
- Provide sample punch card reader script for s390x (#462953) (dcantrell)
- Fix a typo that shouldn't have even gotten though. (clumens)
- Check that the platform and product are also correct (#469367). (clumens)
- Remove cio_ignore functionality for s390x (dcantrell)
- Remove bootdisk/s390 (dcantrell)
- If method=nfs: is given, check if it's really an NFSISO install (#468885).
(clumens)
- Get the right list elements for the iscsi text interface (#466902).
(clumens)
- Don't traceback when displaying error messages (#469372). (clumens)
- Make sure we differentiate locked luks devs from deleted ones. (dlehman)
- Fix a typo that breaks kickstart with encryption. (#469318) (dlehman)
- Call startNewt earlier than network bring up (#469171). (clumens)
- Write out the path to the repo, not anaconda-ks.cfg (#467753). (clumens)
- Allow specifying devices by path if they're files (#468504) (katzj)
- Fix the last pychecker warnings in master (hdegoede)
- Add --strict option to runpychecker.sh (hdegoede)
- Don't sleep(5) after xrandr (ajax)
- Force DPI to 96 even harder (#458738) (ajax)
- Don't try to switch VT to the one that X is on (ajax)
- Only copy /etc/resolv.conf if instPath != '/' (dcantrell)
- 'is not' -> '!=' (dcantrell)
- Write --dhcpclass instead of --class to the anaconda ks file. (jgranado)
- Fix 2 issues in pyparted found by pychecker (hdegoede)
- Add a bit of documentation to the top of runpychecker.sh (hdegoede)
- Add runpychecker.sh script and pychecker-false-positives file (hdegoede)
- Fix saving tracebacks via scp while in text mode. (clumens)
- Search for the hash in the whiteboard, not as the entire whiteboard.
(clumens)
- Fix various syntax errors caught by PyChecker (hdegoede)
- Wouldn't it be nice to have some real documentation in filer.py? (clumens)
- Make sure the productVersion given by .treeinfo exists in bugzilla
(#468657). (clumens)
- Let DNS lookups work from %post scripts (#468132) (dcantrell)
- Do not use /.tmp for temporary files (#468720) (dcantrell)
- Don't treat encrypted PVs as available if we don't have the key. (#465240)
(dlehman)
- Do all new device passphrase prompting from partitioningComplete. (dlehman)
- Fix the obviously stupid typo. (clumens)
- There's a new version of the firewall command for F10 (#467753). (clumens)
- Another fix for printing package summaries in text mode (#468283).
(clumens)
- Fix traceback in network.bringUp() (#468651) (dcantrell)
- lvresize requires a --force arg now (#468478) (katzj)
- Include return code on resize failure error message (#468479) (katzj)
- Catch UnicodeDecodeError so traceback messages display anyway. (dcantrell)
- Do not write NM_CONTROLLED=yes to ifcfg files (#468028) (dcantrell)
- Log D-Bus messages at ERROR or INFO level. (dcantrell)
- Write dhcpclass to the dhclient conf file for the device (#468436)
(dcantrell)
- Tell NetworkManager not to touch network interfaces when / is a netfs
(hans)
- Catch more X failures and fallback to text (#467158). (clumens)
- Fix a typo when using network --gateway (#468364). (clumens)
- Fix icon (#468273) (katzj)
- Remove extra debug info. (pjones)
- Fix the damn spinner in the progress bar. (pjones)
- Fix whitespace. (pjones)
- Fix "looking for installation images" when there's no disc at all. (pjones)
- Make sure dialog deletions take effect sooner (#455676). (clumens)
- Make cdrom drive door status messages be INFO not DEBUG. (pjones)
- Don't switch to tty6 on vnc installs. (clumens)
- Update font list (#462295). (clumens)
- Don't display the entire lengthy device description (#467825). (clumens)
- Fix ext4 detection on existing partitions (#467047) (rvykydal)
- Make sure we handle the /tmp/method file for FTP correctly (#467753).
(clumens)
- Do not write NM_CONTROLLED=yes to ifcfg files (#468028) (dcantrell)
- Revert "dhclient-script not needed for NetworkManager" (clumens)
- Skip Installation Repo when writing out repo kickstart lines. (clumens)
- Correct media check docs (#468061). (clumens)
- Many translation updates
- Make kickstart installs work again (#374271, #392021, #448096, #466340,
#466304) (dcantrell)
- Let users go Back when loading updates. (dcantrell)
- Write ifcfg files to /etc/sysconfig/network-scripts instead of /.tmp
(dcantrell)
- Handle unknown hosts in getDefaultHostname (#466775) (dcantrell)
- Try to look up the hostname by the IP address NM reports (#466775)
(dcantrell)
- NM no longer provides the hostname as a property (#466775). (clumens)
- ext4dev -> ext4 (esandeen). (clumens)
- Move persistent network udev rule to under /etc (#464844). (clumens)
- Update keymaps to include latest Romanian settings (#466117). (clumens)
- Take ip= parameter values by not resetting ipinfo_set. (dcantrell)
- Remove unnecessary STEP_IP code. (dcantrell)
- Fix how configureTCPIP() returns. (dcantrell)
- Write new sysconfig data to a tmpdir first, then move in place. (dcantrell)
- Write NM_CONTROLLED=yes rather than NM_CONTROLLED= (dcantrell)
- Get rid of some iface flags that were not doing anything anymore.
(dcantrell)
- Generate new config files in /.tmp in writeEnabledNetInfo() (dcantrell)
- Remove unused variables from configureTCPIP() (dcantrell)
- Do not call get_connection() twice for DHCP. (dcantrell)
- Ask for language and keyboard in rescue mode (#466525). (clumens)
- Fix bringing up the network in rescue mode (#466523). (clumens)
- If we don't have a translation for a lang name, just use the English
(#466515) (katzj)
- Disable some more IPv6 checks. (clumens)
- Fix a typo (second part of #466374) (katzj)
- Pull in static network settings from the boot: line (#465270) (dcantrell)
- Do not segfault when going back to select a new interface (#465887)
(dcantrell)
- Do not test for DNS settings in mountNfsImage() (dcantrell)
- Populate struct iface correctly in setupIfaceStruct() (dcantrell)
- Do not rely on loaderData->noDns to tell if we have DNS configured.
(dcantrell)
- Skip askmethod dialog if user passes repo= and stage2= (dcantrell)
- Reset resolver in get_connection() (dcantrell)
- Fix problems dealing with PXE boot and the ksdevice= parameter. (dcantrell)
- Disable more IPv6 code in loader for now. (dcantrell)
- Write BOOTPROTO=static for manual IPv4 config. (dcantrell)
- Disable IPv6 widgets for F-10. (dcantrell)
- Add iwlagn driver firmware (#465508). (clumens)
- Move starting HAL to after we've probed for hardware. (clumens)
- Don't try to load a couple modules that no longer exist. (clumens)
- The Chinese font package has changed names (#465290). (clumens)
- Fix a traceback when there's no ksdevice given (#465638). (clumens)
- Fix traceback in post install configuration (hans)
- Disable IPv6 interface widgets in loader for now. (dcantrell)
- Start NetworkManager earlier (#462083) (hans)
- Work around gtk2 bug (#465541) (hans)
- Move our yum.conf out of /etc (#465160) (katzj)
- Correctly display the IP address a vnc viewer should connect to (#465353).
(clumens)
- lohit-fonts-malayam has been replaced by smc-fonts-meera (#456449).
(clumens)
- Fix a typo in cleaning up repos. (clumens)
- Fix the mount error reading for real this time (pjones, #465250). (clumens)
- Support ksdevice=link when booting from boot.iso. (dcantrell)
- Automatically select NIC based on ksdevice= boot parameter. (dcantrell)
- Fix text inconsistency (#465165). (clumens)
- If there's an error running Xvnc, also print it to the console. (clumens)
- Set the installation repo when using the askmethod UI (#463472). (clumens)
- Fix a segfault when the wrong HDISO repo parameter is given. (clumens)
- Remove the 'Installation Repo' cache directory after install (#464853).
(clumens)
- If there aren't any usable NICs, don't write out a config (#465127).
(clumens)
- It helps to specify what the method string should be split on (#464855).
(clumens)
- Gateway and nameserver are optional for static network configuration.
(dcantrell)
- Store nameserver in NetworkDevice object. (dcantrell)
- Fix a traceback calling enableNetwork (#464849). (clumens)
- Enable groups when creating new repos since yum doesn't do that now.
(clumens)
- Update FQDN patch to fix a couple tracebacks (#464191). (clumens)
- Fix static network configuration from boot.iso installs. (dcantrell)
- Use all caps naming for the netdev keys. (dcantrell)
- Left justify text in ui/netconfig.glade interface. (dcantrell)
- Use the right attribute for repo URLs. (clumens)
- Use fullscreen for small screens (#444943) (katzj)
- Another try at fixing up reading errors from mount. (clumens)
- Don't traceback if no baseurl has been set yet. (clumens)
- Allow users to enter a hostname or FQDN during installation (#464191)
(dcantrell)
- Whitespace cleanups. (dcantrell)
- Fix mk-s390-cdboot on s390x (#184648) (dcantrell)
- Run all text through unicode() before putting it into the TextBuffer.
(clumens)
- Add reverse chap iscsi bits for kickstart (hans)
- Properly center the passphrase entry dialog. (clumens)
- Fix test for an empty hostname. (clumens)
- Support installs to SD via MMC (#461884) (katzj)
- Set ANACONDA_PRODUCTNAME, etc from /etc/system-release (#464120) (alsadi)
- Reduce code duplication by moving methods into backend (katzj)
- Select packages after repos are set up (#457583) (katzj)
- Add a basic reset method (katzj)
- Cleanups and simplifications to repo setup (clumens) (katzj)
- Revert "Revert "lang-names should really only depend on lang-table""
(katzj)
- Fix lang-name generation + fix traceback with LANG=C (katzj)
- Allow going back to the method selection screen on error (#463473).
(clumens)
- Make the boot loader device dialog less ugly (#463489). (clumens)
- Look in images/ for install.img on HDISO (#463474). (clumens)
- Sort Installation Repo to the top of the repo list. (clumens)
- Fuzzy string to fix translation build (katzj)
- Fix network interface bring up in text mode (#463861, #462592) (dcantrell)
- Bring back isys.resetResolv() and fix NetworkManager polling in
network.py. (dcantrell)
- Poll 'State' property from NetworkManager in network.bringUp() (dcantrell)
- Log error in rescue mode is network.bringUp() fails. (dcantrell)
- Set the first network device in the list to active. (dcantrell)
- Get rid of firstnetdevice in Network (dcantrell)
- Do not write /lib/udev.d rules if instPath is '' (dcantrell)
- Fix problems with bringDeviceUp() calls (#463512) (dcantrell)
- Restore old lang-names generation method (dcantrell)
- Remount /mnt/sysimage/dev after migrating filesystems. (clumens)
- Use the instroot parameter like we should be doing. (clumens)
- Call network.bringDeviceUp() instead of old isys functions. (dcantrell)
- Pass device name to network.setDNS() and network.setGateway(). (dcantrell)
- NetworkManager fixes in network.py (dcantrell)
- Remove code from isys not needed for NetworkManager. (dcantrell)
- Avoid writing out NM_CONTROLLED more than once. (dcantrell)
- Write out final ifcfg-DEVICE files correctly. (dcantrell)
- Use POSIX and LSB hostname length limit. (dcantrell)
- Consistent whitespace usage in network.py (dcantrell)
- Do not try to start hald or dbus-daemon from anaconda. (dcantrell)
- On HDISO installs, mark LABEL= and UUID= partitions as protected. (clumens)
- Do encrypted device passphrase retrofits while activating partitioning.
(dlehman)
- Use one passphrase for all new LUKS devices and offer retrofit to old
ones. (dlehman)
- There's only one passphrase member (encryptionPassphrase) in Partitions.
(dlehman)
- Only add LUKSDevice instances to PV requests as needed. (dlehman)
- New device passphrase is now always global w/ option to retrofit. (dlehman)
- Don't prompt for a passphrase when creating encrypted devices. (dlehman)
- Define a method to add a passphrase to an existing LUKS device. (dlehman)
- Fix a traceback when starting a shell in rescue mode (#462148). (clumens)
- md, lock_nolock, and dm_emc kernel modules no longer exist. (clumens)
- Fix iscsi disk detection with newer kernels (rh 461839, 461841) (hans)
- Fix the crash reported in bug 454135 (hans)
- Make iBFT reading explicit from a higher level (hans)
- Add ibft flag to ease in testing. (hans)
- Support iSCSI CHAP and Reverse CHAP authentication (rhbz#402431,
rhbz#432819) (hans)
- Don't set iscsi devices to autostart (rhbz#437891) (hans)
- Add full CHAP support to iSCSI. (rhbz#432819) (hans)
- Do not try to initialize iSCSI, when no portal (#435173) (hans)
- Fix wrong function names for iscsi login/start (rhbz#295154) (hans)
- Set an attribute when iscsid is started (#431904). (hans)
- Better fixes for iscsi probing (patch from jlaska) (hans)
- Make sure ISCSIADM and such are defined (rhbz#431924) (hans)
- Fix iscsi so that mkinitrd can actually talk to the running daemon (hans)
- Make iscsi/ibft work (hans)
- Add mk-images changes forgotten in previous commit (hans)
- Add support for iSCSI iBFT table (#307761) (hans)
- Use struct audit_reply instead of struct auditd_reply_list (dcantrell)
* Sat Sep 06 2008 David Cantrell <dcantrell@redhat.com> - 11.4.1.31-1
- Use --service=NAME in firewall.py when calling lokkit (dcantrell)
- Make NM work for the DHCP case, at least (dcbw) (#461071). (clumens)
- Sleep a little after dbus to give it time before HAL connects. (clumens)
- Add libsqlite to the initrd, which is needed by NSS libs. (clumens)
- Add more dlopen()ed libraries to the initrd. (clumens)
- Fix various problems with the exn saving UI (#461129). (clumens)
- Fail gracefully if we can't talk to NetworkManager over DBus. (dcantrell)
- Reword text for easy of translating plurals (#460728). (clumens)
- Make sure /bin/sh is linked to /bin/bash (dcantrell)
- Do not include /usr/lib/gconv in install.img (dcantrell)
- Add /etc/NetworkManager/dispatcher.d to the install.img. (clumens)
- Remove last vestiges of rhpxl and pirut. (clumens)
- Only one list of packages in upd-instroot, thanks. (clumens)
- Add xrandr back into the install.img (#458738). (clumens)
- Add a couple more directories to search paths. (clumens)
- Do repo setup and sack setup as separate steps. (clumens)
- Fix a typo that was causing repos in the kickstart file to be skipped
(#451020). (clumens)
- Fix a traceback with unencrypted autopart. (dlehman)
- doLoggingSetup has grown some new arguments (#460654). (clumens)
- Updated German translation (fabian)
- Remove references to isConfigured in network.py (dcantrell)
- Define the NM_STATE_* constants in isys.py (dcantrell)
- Rewrite NetworkWindow to only prompt for hostname. (dcantrell)
- Pad the icon more in network.glade (dcantrell)
- Removed iface_dns_lookup() (dcantrell)
- Don't pass NULL to dbus_message_unref() (dcantrell)
- New network configuration screen for GTK+ UI. (dcantrell)
- Pass family to iface_ip2str() call (dcantrell)
- Rewrite iface_ip2str() to talk to NetworkManager over D-Bus (dcantrell)
- New translation (besnik)
- Pull in the gtkrc file so we can find the theme. (clumens)
- Use signed git tags (katzj)
- Skip networkDeviceCheck in dispatch.py (dcantrell)
- Do not call has_key() on NetworkDevice, use isys.NM_* (dcantrell)
- Separate lines per BR. (dcantrell)
- Remove invalid line iw/autopart_type.py (dcantrell)
- Fix syntax error in yuminstall.py, fix pychecker warnings. (dcantrell)
- Updated Hungarian translation (sulyokpeti)
- Add missing () to function definitions. (dcantrell)
- Fix err handling in doMultiMount() (dcantrell)
- Revert "Pass --follow to git-log" (dcantrell)
- Remove references to /tmp/netinfo (dcantrell)
- Gather network settings from NetworkManager and ifcfg files. (dcantrell)
- Update the pot file and refresh the pos (katzj)
- For all HTTP/FTP repos, keep the cached repodata (#173441). (clumens)
- Fix a traceback when trying to set the status whiteboard on a bug.
(clumens)
- When the wrong filesystem type is used, raise a more explicit error.
(clumens)
- Don't copy the install.img over in single media cases (#216167). (clumens)
- Remove isys.getopt() (dcantrell)
- Remove code not used in net.c (dcantrell)
- Write to /etc/sysconfig/network-scripts/ifcfg-INTERFACE (dcantrell)
- mystrstr() -> strstr() (dcantrell)
- Expand getDeviceProperties to return all devices. (dcantrell)
- Pass --follow to git-log (dcantrell)
- Support accessing preexisting LUKS devs using LRW or XTS ciphers.
(#455063) (dlehman)
- Use yum's handling of optional/default/mandatory package selection
(#448172). (clumens)
- List iSCSI multipath devices in the installer UI. (dcantrell)
- Fix text wrap width on the partition type combo, for real this time
(#221791) (dlehman)
- For /dev/hvc0 terminals, set TERM to vt320 (#219556). (dcantrell)
- The Timer class is no longer used. (clumens)
- Handle preexisting swraid w/ encrypted member disks/partitions. (dlehman)
- Don't try to close a dm-crypt mapping that is not open. (dlehman)
- Remove unused silo code that wouldn't even build if it were used. (clumens)
- Remove some really old, really unused code. (clumens)
- Add another mount function that takes a list of fstypes to try. (clumens)
- Download progress indicator for FTP and HTTP in stage 1. (dcantrell)
- Make sure we wait for NetworkManager. (dcantrell)
- Renamed loader2 subdirectory to loader (hooray for git) (dcantrell)
- Do not include wireless.h or call is_wireless_device() (dcantrell)
- Add getDeviceProperties() and rewrite getMacAddress() (dcantrell)
- Do not include wireless.h (dcantrell)
- Rewrite isys.isWireless() to use D-Bus and NetworkManager (dcantrell)
- Rewrite isys.getIPAddress() to use D-Bus and NetworkManager. (dcantrell)
- Include ../isys/ethtool.h instead of ../isys/net.h. (dcantrell)
- Rename isys/net.h to isys/ethtool.h, removed unnecessary typedefs.
(dcantrell)
- Removed waitForLink() function in loader. (dcantrell)
- Remove initLoopback() function in loader (dcantrell)
- Use D-Bus properties to get current NM state. (dcantrell)
- Use dbus in hasActiveNetDev() and _anyUsing() (dcantrell)
- Use NetworkManager instead of libdhcp. (#458183) (dcantrell)
- When mount fails, pass the error message up to the UI layer. (clumens)
- Bring askmethod back to prompt for the location of install.img. (clumens)
- Don't try to use self.tree as the mode to open .discinfo. (clumens)
- Remove all the RPM lock files before creating a new transaction (#456949). (clumens)
- Support VDSK devices on s390x (#264061) (dcantrell)
- Remove an instance of NEEDGR still existing to fix graphical
isolinux (#457144) (katzj)
- use newer mke2fs arguments for different filesystems (sandeen)
- Use attributes to tell us whether filesystems are
bootable (#457037). (clumens)
- Make sure we drag in gzip, used by the image creation stuff. (jkeating)
- Add a text-mode network config dialog so default installs can work. (clumens)
- Use the right format for the NFS methodstr, but harder this time. (clumens)
- Ask the user if he wants to use VNC instead of text mode (#453551) (msivak)
- Fix a segfault when displaying the wrong CD message. (clumens)
- Use the right format for the NFS methodstr. (clumens)
- Use correct path for FAK plugins in upd-instroot (jgranado)
- Remove from being installed too (katzj)
- Remove anaconda-runtime as a separate subpackage (katzj)
- Remove the stuff we're not calling. (pjones)
- Remove this since we don't use it anymore (katzj)
- Don't continue on using the base installclass if we can't find one (katzj)
- Get rid of wlite and unicode-lite; these were necessary to support (pjones)
- Remove pkgorder and splittree; these should be in pungi (katzj)
- Add the .treeinfo file into the exception report. (clumens)
- Fix a typo (#452140). (clumens)
- Just call the XStartupCB() function directly and randr to the
desired resolution (katzj)
- Stop writing out an xorg.conf (katzj)
- Make the "dump to removable device" option work in anaconda. (jgranado)
- Stop neutering DRI (notting)
- make scripts/buildinstall take multiple repos (wwoods)
- Don't worry about telling people that interactive text mode is in
wrong lang (katzj)
- Allow cpio updates.img in the tree for URL installs. (dlehman)
- Declare unpackCpioBall for use from within urlinstall.c. (dlehman)
- Don't unlink an image we retrieved but could not mount as it
could be .cgz. (dlehman)
- Don't run lspci with an explicit path (katzj)
- Include lspci on all images (#445974) (katzj)
- Add support for attaching gdbserver to the loader early on. (clumens)
- Add virtio max partition count (markmc)
- Sort virtio devices first (markmc)
- Merge branch 'master' of ssh://git.fedorahosted.org/git/anaconda (andrewm)
- 2008-05-08 Andrew Martynov <andrewm)
- Look in the right place when ISO images are in a
subdirectory (#443580). (clumens)
- And run in the root (#374921) (katzj)
- Don't crash when given URLs of the form ftp://user)
- Use 'yum clean all' when cleaning up after an upgrade, not
preupgrade (#374921) (katzj)
- Kickstart flag is backwards (katzj)
- If we're given a language, don't warn about console fonts (#444258) (katzj)
- And actually include the bash binary too (#443700) (katzj)
- Search path rather than hard-coding path to mdadm (#444843) (katzj)
- Fix incorrect command name in error message. (clumens)
- Specify which protocol is used for remote saving (#440214). (clumens)
- Use bash for minstg2 shell (#443700) (katzj)
- Revert PS1 and PATH changes as they don't work with busybox as used
in minstg2 (katzj)
- Don't use megabytes for the livecd size for copying. (notting)
- find moved (katzj)
- Fix up silly syntax error that crept in to this commit (katzj)
- Back to using the raw version of the docs (#442540) (katzj)
- Expire yum caches on upgrade (#374921) (katzj)
- Include KERNEL== in udev rules (#440568) (dwmw2)
- Don't look for a .discinfo file in rescue
mode (jvonau, #442098). (clumens)
- Slower machines may take more than five seconds for hal
to start (#442113) (katzj)
- Pass the full device path (notting)
- Only include the parts of grub that will work without
crazy tricks (#429785) (katzj)
- Fix destdir handling in upd-kernel (markmc)
- Get rid of module ball remnants in mk-images (markmc)
- Make upd-kernel handle version numbers the way we do them now (markmc)
- Fix ia64 kernel path problems (katzj, #441846)
- Don't tag more than one partRequest with mountpoint=/boot/efi (pjones)
- Don't treat tiny disks as EFI System Partitions during autopart (pjones)
- Ignore some warnings copying into /etc and /var (clumens)
- Try to mount the NFS source in the loader to verify it is correct (clumens)
- Be as clean as possible when looking for files/directories (jgranado, #431392)
- More ia64 kernel finding fixage (katzj, #441708)
- Fix read permissions on efidisk.img (pjones)
- Use the mount flags passed to isys.mount() (pjones)
- Set the initial state of the auto-encrypt checkbutton (#441018) (katzj)
- Don't treat RAID devices as "disks" to avoid lots of odd
behavior (#438358) (katzj)
- Log a message if we disable selinux on upgrade (katzj)
- Build efiboot.img on x86_64 and i386 . (pjones)
- When splitting srpms, only link srpms, nothing else. (jkeating)
- Don't cause the text to flicker between installed packages. (clumens)
- Don't cause the screen to jump up and down between
packages (#441160). (clumens)
- Fix zooming and centering in the timezone screen (#439832). (clumens)
- Handle ia64 kernel path (katzj)
- And add nas to the list (#439255) (katzj)
- Set parent so that the dialog centers (#441361) (katzj)
- Don't show the label column (#441352) (katzj)
- Do string substitution after we've translated (#441053) (katzj)
- Set domain on glade file so translations show up (#441053) (katzj)
- fix compression of modules (notting)
- More build fixing due to translation breakage. (katzj)
- Add code to create efiboot.img on i386 and x86_64 (pjones)
- Remove gnome-panel too, it's no longer multilib. (jkeating)
- Fix raising new NoSuchGroup exception. (clumens)
- remove debugging print (notting)
- Support encrypted RAID member devices. (#429600) (dlehman)
- No longer require Amiga partitions on Pegasos (dwmw2)
- Don't copy the stage2 image every time or on the way back. (clumens)
- Make lukscb.get_data("encrypt") always return a valid value. (pjones)
- Set the scrollbar color so it doesn't surprise me the same way in
the future. (pjones)
- Translation updates.
- Another day, another broken translation commit to fix. (katzj)
- Work around GL crashes in anaconda X by disabling them. (jkeating)
- Clean up "finishing upgrade" wait window (katzj)
- Stop refreshing like mad in text-mode on WaitWindow.refresh() (katzj)
- Avoid progress bars going off the end and making newt unhappy (katzj)
- Brute force hack to avoid the number of packages
overflowing (#436588) (katzj)
- Revert "Change the default level in /etc/sysconfig/init now
(#440058)." (notting)
- Add gnome-applets to the upgrade blacklist, fix kmymoney2 typo. (jkeating)
- Don't enable encryption by default (katzj)
- Print our mount commands to /dev/tty5 for easier debugging. (clumens)
- Change the default level in /etc/sysconfig/init now (#440058). (clumens)
- Make the Back button work when asking for tcp/ip information in
loader.c. (#233655) (jgranado)
- Have <F12> work in the network configuration stage (#250982) (jgranado)
- Use a better test to see if a package group doesn't exist (#439922). (clumens)
- avoid behavior in (#208970) (jgranado)
- Correctly label the xen images in the .treeinfo file (jgranado)
- Translation updates
- Translation updates
- Allow GPT disk labels on ppc/ppc64. (dcantrell)
- Tear down the right loopback device before going to stage2. (clumens)
- Don't pass None as stdout or stderr. (clumens)
- Make sure there's a stdout to write to. (clumens)
- Handle fstype munging in isys.readFSType instead of in various
other places. (dlehman)
- Fix a typo in new encrypted LV code. (dlehman)
- Partitioning UI for handling of preexisting encrypted devices. (dlehman)
- Support discovery of preexisting rootfs on LV. (dlehman)
- Improve handling of logical volume device names when encrypted. (dlehman)
- Add support for discovery of preexisting LUKS encrypted devices. (dlehman)
- Add support for retrieving LUKS UUIDs. (dlehman)
- Refresh po files (katzj)
- Mark for translation based on feedback from translators (katzj)
- Just relabel all of /etc/sysconfig (#439315) (katzj)
- When dhcp is selected ensure that bootproto is set to
dhcp (RPL-2301) (elliot)
- Fix for test mode repo bits (katzj)
- Try to make the size flow a little more for weird resolution
screens (#439297) (katzj)
- Add kmymoney to upgrade remove list (#439255) (katzj)
- Use anaconda-upgrade dir in the preupgrade case (katzj)
- Have 'preupgrade' key doing an upgrade (katzj)
- Fix what we expect to be the message from ntfsprogs (katzj)
- Fix up compile error for new newt (katzj)
- Don't traceback if we have little freespace partitions (#438696) (katzj)
- Translation updates (ko, ru)
- Translation updates (hi, fr, kn, de, ml, es, mr, ko, te)
- Fix up more unicode shenanigans (#437993) (katzj)
- Move /tmp/stage2.img to /mnt/sysimage to free up some
memory (#438377). (clumens)
- Be a little smarter about downloading repo metadata (#437972). (clumens)
- Make sure that devices are set up before using them. (#437858) (dlehman)
- Don't prepend /dev/ on bind mounts either. (clumens)
- Use the repo name instead of id in the group file error
message (#437972). (clumens)
- Handle /dev being on hard drive devices in the second stage (katzj)
- Fix the build (katzj)
- The units for /sys/block/foo/size aren't bytes. Fixes finding some
disks (katzj)
- Remove the check for .discinfo on URL installs. (clumens)
- Always unmount /mnt/source on hdiso installs before starting
stage2. (clumens)
- Always unmount /mnt/source on nfsiso installs before starting
stage2. (clumens)
- Make sure the first disc image is mounted before setting up repos. (clumens)
- Fix $UPDATES for real (katzj)
- Avoid piling up slashes in the UI when retrying (#437516). (clumens)
- Require comps-extras now that we don't require pirut bringing it in (notting)
- Put "ide-cd_mod" in the list of modules to pull in. (pjones)
- Translation updates (de, fi, it, gu, ta, pa)
- Fix a typo. (clumens)
- Fix the build. (clumens)
- Make sure we return the same kind of exception in all cases. (clumens)
- Filter so we don't show LVM and RAID components when adding
boot entry (#437501) (katzj)
- Only print the filename we're fetching, as newt doesn't like
long names. (clumens)
- Fix off by one error reading .buildstamp (pjones)
- Use the right path when trying to fetch .discinfo. (clumens)
- Don't prepend /dev/ onto nfs devices. Also log mount
errors to tty5. (pjones)
- Update translations (pl, de)
- Use i586 kernel (#437641) (katzj)
- Give indication of success or failure for mediacheck (#437577) (katzj)
- Ensure the UUID for the rootfs is random and not the same for every
live image (katzj)
- Make migration from ext3 -> ext4 saner on upgrade (#437567) (katzj)
- Force filesystem mount options on /boot/efi . (pjones)
- On HDISO installs, look for the stage2.img file in the right
directory. (clumens)
- Accept devices with or without a leading /dev/. (clumens)
- .buildstamp no longer contains productPath, so change
the default (#437509). (clumens)
- Remove references to an uninitialized variable. (clumens)
- Use shortname=winnt instead of shortname=win95 when
mounting /boot/efi (pjones)
- Do not strip leading or trailing whiltespace from
passphrases. (#437499) (dlehman)
- Set methodstr for nfsiso installs (#437541). (clumens)
- Create and check /boot/efi correctly, and use preexisting
one if available. (pjones)
- Handle /boot/efi and /boot both as bootrequests (pjones)
- Emit "efi" as /boot/efi's filesystem type (pjones)
- Add EFI handling to the bootloader setup choices. (pjones)
- Add efi to the ignoreable filesystem list. (pjones)
- Add EFIFileSystem, and getMountName() to hide that it's really vfat. (pjones)
- Add isEfiSystemPartition(), and use it where appropriate (pjones)
- Call getAutoPartitionBoot with our partition list as an arg. (pjones)
- Don't show the epoch in package selection either (#437502). (clumens)
- Fix some errors on reporting which files are being downloaded. (clumens)
- Revert "Handle /boot and /boot/efi separately, plus fixes" (pjones)
- Handle /boot and /boot/efi separately, plus fixes (pjones)
- Get rid of unused >1024 cylindar check, fix text of boot
check exceptions. (pjones)
- Make bootRequestCheck() check /each/ boot partition like it's
supposed to, (pjones)
- Fix shell quoting on numbers > 9, and fix an error message. (pjones)
- Don't show the epoch in the progress bar (#437502). (clumens)
- Include efibootmgr in the instroot (pjones)
- yum.remove removes installed packages, not to be installed
packages (#436226) (katzj)
- Make the /tmp/updates vs RHupdates code at least a little readable. (pjones)
- Allow vfat update images. (pjones)
- Fix syntax error (pjones)
- Add a progress bar for when we're downloading headers (#186789). (clumens)
- mount will set up the loopback device if we let it. (clumens)
- Fix mounting problems with NFSISO images. (clumens)
- Simplify the logic for the upgrade arch check (katzj)
- Add a fallback method for determining the architecture of installed
system during an upgrade (#430115) (msivak)
- Avoid a traceback (#436826) (katzj)
- Make sure host lookups work for manual net config (#435574). (dcantrell)
- Focus root password entry box (#436885). (dcantrell)
- Make sure default is SHA-512 for libuser.conf. (dcantrell)
- Fix detection of ISO images on a hard drive partition. (clumens)
- Devices names aren't prefixed with /dev/. (clumens)
- Filter out /dev/ram* devices from the list of hdiso partitions. (clumens)
- But make sure that we've activated the keymap now that X
follows its defaults (katzj)
- Don't set a keyboard in the X config, we should just do this
at runtime (katzj)
- Writing out the nfs method line is a lot simpler now. (clumens)
- Use /mnt/sysimage/tmp/cache for the yum cache, instead of the
ramdisk. (clumens)
- Translation updates (nl, gu, ml, mr, pa)
- Don't use the bits from $UPDATES unless $UPDATES exists (katzj)
- Fix horkage with busybox stuff. There's now start-stop-daemon (katzj)
- Require new enough version of yum-utils (katzj)
- Pass the --archlist option to yumdownloader (jkeating)
- Update pt_BR translation
- Don't require some things which we fall back gracefully when not there (katzj)
- Check for filesystem utilities to see if a filesystem is supported (katzj)
- Write out keyboard settings before installing packages. (related
to #429358) (dlehman)
- Update pl translation
- Make sure http:// or ftp:// is specified (#436089) (katzj)
- Fix segfault when port is specified (#435219) (katzj)
- Use ntfsresize -m to get minimum size (#431124) (katzj)
- Use the right path to the .discinfo file when validating a tree. (clumens)
- Add --archlist to repoquery call. (jkeating)
- Translation updates (pl, nl, ja)
- Handle efibootmgr and grub.efi in upd-instroot. (pjones)
- Merge in branch to implement stage2= parameter. (clumens)
- Revert the memtest86 bits for EFI, since this gets run on multiple arches. (pjones)
- Use iutil.isEfi() instead of testing for ia64-ness. (pjones)
- Only do gptsync if we're not using EFI. (pjones)
- Don't do gptsync if we're using EFI. (pjones)
- Use gpt on all efi platforms. (pjones)
- Rework isEfi() to be slightly more conservative. (pjones)
- Test for using efi rather than arch==ia64 (pjones)
- Don't copy memtest86 in on EFI since it won't work. (pjones)
- Add comment regarding usage of elilo (pjones)
- Free some variables so we can http GET twice if needed. (clumens)
- Change the method config prompts. (clumens)
- Support stage2= for CD installs in loader. (clumens)
- Support stage2= for HD installs. (clumens)
- Support stage2= for NFS installs. (clumens)
- Support stage2= for URL installs. (clumens)
- Update the method string handling for NFS and URL installs. (clumens)
- mountStage2 now needs to take an extra argument for updates. (clumens)
- If stage2= is given, it overrides the check for a CD stage2 image. (clumens)
- Support the stage2= parameter, and add a flag for it. (clumens)
- Only use UUID= for devices we would have labeled. Related to #435228 (katzj)
- If we don't find a kernel package, then give a better error (katzj)
- Translation updates (cs, de)
- Fix a traceback when we have an error. Related to #433658 (katzj)
- Add virtio_pci in hopes of getting virtio working (katzj)
- Pull in the bits of pirut that we use so that we don't depend on pirut (katzj)
- Default to RAID1 instead of RAID0 (#435579) (katzj)
- Refresh po (katzj)
- Fix traceback leaving task selection screen (#435556) (katzj)
- More ext4 vs ext4dev nonsense. (#435517) (katzj)
- Fix reverse name lookup. (pjones)
- Don't write out /etc/rpm/platform anymore. (katzj)
- anaconda-runtime now needs yum-utils (katzj)
- Add 'testiso' target (katzj)
- Remove rescue cd creation scripts (katzj)
- Take --updates with location of additional updates beyond the package
set used (katzj)
- Change the ISOs we build (katzj)
- Take advantage of yum repos being available (katzj)
- Allow recovery from some missing repodata conditions. (clumens)
- Rework the repo editor screen to be more modular. (clumens)
- Move doPostImages to be run after the second stage build (katzj)
- Ensure that group info for txmbrs is accurate after we reset (katzj)
- Fix backwards logic for yum verbosity (katzj)
- No more arc (#435175) (katzj)
- Remove an unused method. (clumens)
- Use non-deprecated HAL properties. (notting)
- More crud to deal with the fact that rawhide trees are composed weird (katzj)
- Gtk does not have the error type, use custom with proper
icons. (#224636) (msivak)
- Fix up symlinks that could be broken with our movement here (#434882) (wwoods)
- pvops xen uses hvc as its console (#434763) (katzj)
- Follow symlinks when looking for the anaconda-runtime package. (jkeating)
- Write out UUID in the fstab (#364441) (katzj)
- Add support for getting UUID using libblkid (katzj)
- Fix calculation of sizes of LVs when resizing (#433024) (katzj)
- Add back some bits for text mode (katzj)
- Remove advanced bootloader bits (katzj)
- Add support for actually changing where the boot loader gets
installed as well (katzj)
- Less text. (katzj)
- Reorder things a little, clean up spacing (katzj)
- Use a tooltip instead of a long bit of text that most people
don't read (katzj)
- Remove advanced checkbox (katzj)
- Switch the grub installation radio to be a checkbutton. Cleanups for
grub only (katzj)
- Lets redirect to /dev/null to ensure that what we get in DIR is the
result of pwd. (jgranado)
- Catch the error emmited by lvm tools during logical volume
creation process (#224636). (msivak)
- Don't try to lock /etc/mtab, fix error detection when mount fails. (clumens)
- Don't append (null) to the NFS mount options. (clumens)
- There's no need to wait if the last download retry failed. (clumens)
- the '-o' is appended to the mount command in imount.c (jgranado)
- Use full path to device for mount in findExistingRootPartitions. (dlehman)
- Map preexisting encrypted devs before mounting everything
in mountRootPartition. (dlehman)
- Fix traceback on test mount in findExistingRootPartitions. (dlehman)
- Use SHA-512 by default for password encryption. (dcantrell)
- Clean up root password user interfaces. (dcantrell)
- Fix up firmware inclusion. This didn't actually ever work. (katzj)
- Fix up the groff related stuff for man pages to be done in the correct
place (katzj)
- remove yumcache (katzj)
- Don't do fixmtimes anymore (katzj)
- Don't compress translations (katzj)
- Don't manually duplicate things from package %post scripts (katzj)
- Remove some unused options (--discs and --buildinstdir) (katzj)
- Keep /etc/nsswitch.conf and /etc/shells (katzj)
- Stop forcing passive mode for FTP by patching urllib (katzj)
- We don't use timezones.gz anymore anywhere (katzj)
- We shouldn't need to remove files that are only in -devel packages (katzj)
- Remove some obsolete files from the list to clean up noise in the
output (katzj)
- We want nss bits on all arches these days (katzj)
- Just use default /etc/nsswitch.conf and /etc/shells (katzj)
- alpha should have translations probably (katzj)
- Remove some things that aren't used anymore (katzj)
- Don't run pkgorder as a part of buildinstall anymore (katzj)
- Remove duplicate file from the file lists (katzj)
- Don't use the static versions of these anymore as they're likely to go
away (katzj)
- Remove weird s390 hack that shouldn't be needed any more (katzj)
- Make makebootfat less noisy (katzj)
- Get rid of dangling fobpath stuff; now that we're not mounting to
create (katzj)
- Ignore .bak files created by glade (katzj)
- Get rid of duplication for yaboot stuff to make scripts less noisy (katzj)
- Correct internationalization of exception handler text (msw)
- More fixing of mount paths (#432720) (katzj)
- securitylevel -> firewall in the spec file. (clumens)
- Include util-linux-ng, which contains mount (#432720). (clumens)
- When mounting stage2 on loopback, add -o loop to mount opts. (clumens)
- Handle modules with more than one description (#432414) (katzj)
- Finish HDISO installs, at least for DVDs (#431132). (clumens)
- Move migration to before mounting filesystems (katzj)
- Fix silly thinko in Eric's patch (katzj)
- Allow ext3->ext4 upgrades (sandeen)
- Do the man pages in rescue mode the right way. (jgranado)
- Merge branch 'master' of ssh://git.fedorahosted.org/git/anaconda (notting)
- Use /etc/adjtime as the configuration file for UTC/not-UTC. (notting)
- Remove all our own mount code. (clumens)
- Use the mount program instead of our own code. (clumens)
- Add the real mount programs to stage1. (clumens)
- Use the correct variables to get the ipv6 info. (#432035) (jgranado)
- Update error messages to match function names. (dcantrell)
- Rename nl.c to iface.c and functions to iface_* (dcantrell)
- In rescue mode, show interface configuration (#429953) (dcantrell)
- Add qla2xxx firmware (#377921) (katzj)
- Rename base repo (#430806). (clumens)
- Remove dep on anaconda from pkgorder (katzj)
- Remove no longer used dumphdrlist script (katzj)
- Fix error message on continuing after changing cds with mediacheck (katzj)
- Fix the progress bar during mediacheck (#431138) (katzj)
- Ensure we disable SELinux if the live image isn't using it (#417601) (katzj)
- Correct nl_ip2str() cache iteration. (dcantrell)
- Check the fstype of the live image (katzj)
- Check for device existence rather than starting with /dev (katzj)
- The FL_TEXT flag has no reason to be here. (#207657) (jgranado)
- Don't traceback when getLabels is called with DiskSet.anaconda set
to None. (dlehman)
- Pass arguments correctly to anaconda (katzj)
- Cancel on escape being pressed with autopart resizing (katzj)
- Handle putting updates ahead of anaconda in the updates= case too. (clumens)
- Make sure the device name starts with /dev (#430811). (clumens)
- Revert "Initial support for network --bootproto=ask (#401531)." (clumens)
- (#186439) handle lv names with "-" when doing kickstart. (jgranado)
- Remove the last references to makeDevInode (#430784). (clumens)
- Don't traceback trying to raise an exception when making
users (#430772). (clumens)
- Include new firstboot module. (clumens)
- Conditionalize ntfsprogs as not all arches include it. (clumens)
- Remove kudzu-probe-stub. (clumens)
- Remove rogue references to kudzu. (clumens)
- Add dogtail support (#172891, #239024). (clumens)
- Fix some error reporting tracebacks. (clumens)
- Try to fix a problem creating users via kickstart (#428891, clumens)
- Fix a loader segfault doing kickstart nfs installs (clumens)
- Move more interactive steps ahead of partitioning (clumens)
- If we can't possibly add advanced devices, don't offer it (#429210, clumens)
- Don't flush after rescanning so recently attached disks are
available (clumens)
- If bootproto is dhcp, unset any static settings (#218489, dcantrell)
- Add some groups to pkgorder to make the CDs come out right (pjones)
- Fix traceback when using non-encrypted RAID (notting)
- Complete the patch for dhcptimeout (#198147, #254032, msivak)
- Require the latest libdhcp (dcantrell)
- Don't set currentMedia when we're on a network install (#428927, clumens)
- Don't offer two reboot options (clumens)
- Remove fsopts that are already defaults (#429039, clumens)
- Remove isofs module to get rid of a FATAL message (clumens)
- Add the crc32c kernel module for iscsi (#405911, clumens)
- Add MAC address to the network device selection screen (#428229, clumens)
- Initial support for network --bootproto=ask (#401531, clumens)
- Remove an extra newline (clumens)
- Add firstaidkit to the rescue image (jgranado)
- Fix the progress bar to hit 100% on the last package (#428790, clumens)
- Add some output so the startup delay doesn't seem quite so long (clumens)
- Initial kickstart support for encrypted partitions (clumens)
- Inherit from the right versions of pykickstart classes (clumens)
- Update for nss files moving to /lib (clumens)
- Remove unneeded arguments from detectHardware function (notting)
- Symlink all udev support binaries to udevadm (notting)
- /sbin/restorecon on /etc/modprobe.d (notting)
- Add the kickstart syntax version to the kickstart file (clumens)
- Require latest libdhcp to fix x86_64 SIGABRT problems
- Make it obvious which partitions are being formatted and encrypted (katzj)
- Set initial sensitivity of encrypt button correctly (katzj)
- Fix traceback on invalid passphrase (#426887) (katzj)
- Use mkstemp() instead of tempnam() (katzj)
- Don't resize filesystems which are being formatted (#426466) (katzj)
- Add cracklib-dicts (#426444) (katzj)
- Fix build (notting)
- Switch away from using kudzu in the loader (notting)
- Use udev in the loader and a dynamically linked stage1 (notting)
- Don't handle all aspects of module loading ourselves - just wrap
modprobe. (notting)
- Ensure there's an active net device (katzj)
- Fix error reporting messages (sfernand, #242252). (clumens)
- Don't immediately retry on downloading a package. (clumens)
- Update to work with new system-config-keyboard. (clumens)
- Validation of root password with cracklib (hhara)
- Minor fixes to liveinst shell script (katzj)
- Fix path to swapoff (katzj)
- Make doMethodComplete not depend on the yum backend (katzj)
- Remove another line related to the release notes (hhara)
- GPLv2+ changes. (dcantrell)
- Add support for encryption via autopart. (katzj)
- Avoid unnecessary downloading and caching by not
setting mediaid (#422801). (clumens)
- Don't copy the stage2 image over for NFS installs. (clumens)
- Remove an unused function. (clumens)
- Allow going back to package selection after transaction errors. (clumens)
- Add file conflicts to the transaction errors we show the user. (clumens)
- Remove isomd5sum/.gitignore (dcantrell)
- Add support for the Efika platform (dwmw2)
- Fix some tracebacks (clumens, #405951)
- Actually include the crypto mods (dlehman)
- Include more nss libs (clumens, #405921)
- Remove some cruft (notting)
- Use libblkid instead of our custom code for fstype and label probing
- Fix tty switching in graphical install
- Initial support for partition and LV resizing. VERY EXPERIMENTAL!
- Commit partitioning changes to disk earlier
- Add start of ext4 support
- Fix some tracebacks
- Add support back for alpha (Oliver Falk)
- Copy over modprobe.conf from live system
- Don't traceback with unconfigured nics (#325071)
- Disable selinux on upgrades if the user has booted with selinux=0 (#242510)
- More speedups building stage2 images (Orion Poplawski)
- Fix some translations (#322681)
- Use nodocs when building stage2 images (Orion Poplawski)
- Add extra headers to ks.cfg request for arch and release (#315601)
- Fix a traceback in partition sanity checking (#316551, #318841, #300721)
- Hack to not ignore the ssb driver for wireless (#311421)
- Set repo cost so we pull things from the DVD instead of network (#245696)
- Make boot partitions 200 megs
- Write reboot commands into generated anaconda-ks.cfg (clumens)
- Don't reload the UI if we don't have to (clumens, #290781)
- Use newer version of device command (clumens)
- Support modname.option=value for passing options to kernel modules
- Fix rescue CD + nfsiso (clumens)
- Blacklist more wireless drivers that can't work
- Make buildarch more predictable (#239897)
- A few upgrade fixes; look for packages in
/var/cache/yum/anaconda-upgrade/packages so that you can predownload them
- Point to the mirror list for the "Additional Fedora Software"
- Font movement (#304271)
- Fix where firmware is looked for
- Blacklist some modules to try to avoid #299351
- Copy over media.repo if it exists
- Fix for pulling firmware
- Remove a useless progress window (#240459)
- Fix Romanian traceback (#292091)
- Catch an exception on repo setup (#295381)
- Fix network device tool tips
- Fix display of groups being installed vs no (#296581)
- Fix Serbian language/keyboard (msivak, #235709)
- Honor "boot from" dropdown more (msivak, #243556, #243799)
- Make sure people are adequately warned about booting from a drive
they're not installing to (msivak, #243799)
- Don't label lvm on live installs either (#297391)
- Make sure we find out about all nics (dcantrell)
- Hard drive install fixing (clumens, #287241)
- Make sure iniparse is in the image (notting, #276941)
- Add the short hostname to the localhost entry (dcantrell, #253979)
- Use the right network kickstart object (clumens)
- More firmware fixes (dcantrell, #177452)
- Skip devices without firmware (dcantrell, #251941)
- Attempt to fix out dso depsolving for stage2
- Fix setting additional repo names (clumens)
- Update install-methods doc (msivak, #252407)
- Add an FS label column (msivak, #248436)
- Allow changing/reconfiguring nic in the loader (dcantrell, #242019)
- Fix man pages in rescue mode (jgranado, #243443)
- Setup everything repo (jgranado, #254014)
- Allow using the "rescue" CD as the second stage for all install
types (#186641)
- Fix firewire module name
- Display arch more prominently (msivak, #244531)
- GPT boot bits (pjones)
- Fix loopback clobbering problem
- Fix tui installs to not hang (dcantrell)
- Fix stage2 generation to use the tree and not configured repos
- Don't format rootfs for live installs (#248085)
- Handle --only-use option for drives (clumens, #198526)
- Avoid reserving labels that won't exist after partitioning is
complete (clumens, #209291)
- Fix traceback opening disks (dcantrell, #245609)
- Fix live installs with /usr/local and /usr as separate partitions (#244913)
- Driver disk reworking (clumens, #213318)
- Write out additional repos in anaconda-ks.cfg (clumens, #206152)
- Fix iscsi error reporting (pjones)
- Add nss/nspr libs to stage2 (clumens)
- Fix code to work with yum 3.2.1 (#245918)
- Preserve owners on live install copy (#243479)
- fix syntax error (jkeating)
- don't capture passwords from kickstart in exception dumps (clumens)
- don't write out unicode text to install.log (clumens, #243477)
- Don't write out remove lines for packages that don't exist on the
installation arch (clumens)
- Remove unused code from partedUtils.py (clumens)
- Fix handling of plain text release notes (Elliot Peele)
- Fix RAID minor number allocation in text mode UI (clumens)
- Force /sbin and /usr/sbin in the PATH (katzj)
- Don't copy stage2.img if it is not found (katzj)
- Test given URL for HTTP/FTP install modes when stage2 is loaded from CD
- Correctly detect if there are no more mirrors to try (clumens, #232639)
- Display size and model info per disk in PartitionTypeWindow in textw
- Support fetching kickstart files from HTTP URLs that require login
information (bnocera@redhat.com, #194247)
- Improve CongratulationWindow.getScreen (katzj)
- Add missing import to livecd.py (katzj)
- Use correct syntax for hal-lock (katzj)
- Don't traceback in cases where there are no drives (katzj, #234697)
- Add fec_mpc52xx, ps3_storage, and gelic_net (#220009)
- Display IP address of the VNC server (#234747)
- Add OSA layer 2 support for System Z (bhinson@redhat.com, #233376)
- Import constants in backend.py (clumens, #234782)
- Add netxen_nic driver (clumens, #230245)
- Fix confusing wording in loader (clumens, #163329)
- Don't tell the user to eject the CD at the end (clumens, #137275)
- Remove some unused functions (clumens)
- More intelligent error handling when the number of packages exceeds
the CD size (clumens, #232104)
- Partitioning UI string fixes (clumens, #203346)
- Name the cciss module 'HP/Compaq Smart Array Controller (#210414)
- More partitioning UI string fixes (#208394)
- Remove duplicate Activate On Boot checkbox in iw netconfig
- Set DHCPv6_DISABLE flag for auto neighbor discovery (#230941, #230949)
- Set loaderData->ip appropriately in STEP_IP (#231290)
- Replace hyphens in BOOTIF= parameter with colons (#209284)
- In strcount() in libisys, return 0 if tmp is NULL (#231290)
- Subclass Raid class in kickstart.py from F7_Raid (clumens)
- Make sure ext2 filesystem module is loaded early (clumens, #230946)
- Smaller required height for main window for livecd installs (katzj)
- Move utility functions around in isys
- Init loopback in stage 1 using ioctl() rather than netlink (#229670)
- Handle netlink messages for RTM_GETLINK that are larger than 4K (#230525)
- Require newest libdhcp
- Remove obsolete findpackageset.py and genheader.py (clumens)
- Update translation files (#227775, clumens)
- BR glib2-static (clumens)
- Add LVM exception handling classes (pjones)
- Wrap lvm command calls with lvmExec() and lvmCapture() (pjones)
- Remove obsolete fbconProbe() and doFbconProbe() (katzj)
- Display 'DHCPv6' rather than 'DHCP' for IPv6/Prefix column
- Make 'description' a property for correct i18n translations (pjones)
- Add the postscripts step (#227470, clumens)
- Do not try to run post scripts if ksdata is missing (clumens)
- Allow going back to interface selection screen in stage1 (#213787, clumens)
- Sort detailed package listing in text mode (clumens)
- Don't try to second guess provided X resolutions or depths (clumens)
- Preserve X resolution given in kickstart file (#158089, clumens)
- Improve listing selected and deselected packages (#189873, clumens)
- Fix argument passing for windows on kickstart installs (clumens)
- Don't set up default partitions during kickstart installs (clumens)
