- Fix anaconda-live package temporary Requires: (mkolman)
- Add a new configuration option allow_imperfect_devices (vponcova)
- Remove the selinux flag (vponcova)
- Rename the Services section (vponcova)
- Fix Arm EFI package selection and 32 bit status (pbrobinson)
- Remove support for the undocumented option force_efi_dir (vponcova)
- Remove the flag extlinux (vponcova)
- Remove the flag nombr (vponcova)
- Remove the flag leavebootorder (vponcova)
- Remove the flag nonibftiscsiboot (vponcova)
- Use the file system type provided by Blivet by default (#1663585) (vponcova)
- Move remaining GUI related files to anaconda-gui (mkolman)
- Create anaconda-live sub-package (mkolman)
- Don't acquire the imp's lock (#1644936) (vponcova)
- Remove install classes from the code (vponcova)
- Remove files with install classes (vponcova)
- Use the Anaconda configuration to configure the storage (vponcova)
- Use the Anaconda configuration to configure the bootloader (vponcova)
- Use the correct name of the variant AtomicHost (vponcova)
- Use the Anaconda configuration to configure payload (vponcova)
- Use the Anaconda configuration to configure network devices (vponcova)
- Use the Anaconda configuration to customize the user interface (vponcova)
- Use the Anaconda configuration to show EULA (vponcova)
- Use the Anaconda configuration to detect unsupported hardware (vponcova)
- Remove the kickstart command installclass (vponcova)
- Fix the anaconda documentation (vponcova)
- Add support for inst.product and inst.variant (vponcova)
- Use the product configuration files in Anaconda (vponcova)
- Require password confirmation in GUI (#1584064) (mkolman)
- Run zipl again after generating initramfs (#1652727) (vponcova)
- Preserve the boot option zfcp.allow_lun_scan (#1561662) (vponcova)
- Don't allow /boot on LVM (#1641986) (vponcova)
- The encoding should be always set to UTF-8 (#1642857) (vponcova)
- Make sure fips is correctly enabled on target system (#1619568) (mkolman)
- Remove workaround for bd_s390_dasd_online (vponcova)
- Clean up /run/install (#1562239) (vponcova)
- Make it possible to exit empty user spoke (#1620135) (mkolman)
- Don't allow to use LDL DASD disks (#1635825) (vponcova)
- Remove initThreading method from pyanaconda.threading (vponcova)
- Drop the inst.noblscfg option (javierm)
- Extend tests for the configuration support (vponcova)
- Split the Anaconda configuration handler to more files (vponcova)
- Add tests for the product configurations (vponcova)
- Read only *.conf files from /etc/anaconda/conf.d (vponcova)
- Create the product configuration loader (vponcova)
- Disable BLS config if new-kernel-pkg script is installed (javierm)
- Drop xorg-x11-server-Xorg check from graphical target detection (#1583958)
(mkolman)
- Create a basic structure of the product configuration files (vponcova)
- Fix pylint errors (vponcova)
- dracut/parse-kickstart: don't abort on --device=link (lkundrak)
- Add provides_network_config system property (rvykydal)
- Get rid of network system capability which does not make sense. (rvykydal)
- Prohibit network configuration on Live OS. (rvykydal)
- Use check_supported_locales to filter unsupported locales (vponcova)
- Replace filterSupportedLangs and filterSupportedLocales (vponcova)
- Remove help-related constants from install classes (vponcova)
- Remove setup_on_boot from the install classes (vponcova)
- Convert a keymap into a list of layouts (vponcova)
- RPM: anaconda-core requires dbus-daemon (awilliam)
- Remove use_geolocation_with_kickstart from install classes (vponcova)
- Simplify the task Activate filesystems (vponcova)
- Remove the flag livecdInstall (vponcova)
- Overwrite network configuration for the live image payload (vponcova)
- Write tests for the installation system configuration (vponcova)
- Resolve the name conflicts in exception.py (vponcova)
- Use the Anaconda configuration in the network module (vponcova)
- Revert "Don't try to get hostnamed proxy in non-installer-image environments
(#1616214)" (vponcova)
- Remove the function can_touch_runtime_system (vponcova)
- Add rules for the installation system (vponcova)
- Configure the installation system (vponcova)
- Replace setNetworkOnbootDefault (vponcova)
- Add tests for the FCoE module (vponcova)
- Discover an FCoE device with a DBus task (vponcova)
- Reload the FCoE module on the storage reset (vponcova)
- Let the FCoE module to provide the dracut arguments (vponcova)
- Let the FCoE module to write the configuration (vponcova)
- Move kickstart support to the FCoE module (vponcova)
- Create the basic structure for the FCoE module (vponcova)
- Install grubby-deprecated when using the extlinux bootloader (javierm)
- Remove configurePayload (vponcova)
- Resolve the name conflicts with conf (vponcova)
- Write tests for the target support (vponcova)
- Simplify the code (vponcova)
- Replace the dirInstall flag (vponcova)
- Replace the imageInstall flag (vponcova)
- Configure the installation target (vponcova)
- Write tests for the default partitioning (vponcova)
- Define the default partitioning statically (vponcova)
- Remove l10n_domain from the install classes (vponcova)
- Re-generate BLS loader file snippets on live installs (#1648472) (awilliam)
- Remove the attribute bootloaderTimeoutDefault (vponcova)
- Remove the attribute bootloaderExtraArgs (vponcova)
- Remove the method setPackageSelection (vponcova)
- Remove the setStorageChecker method (vponcova)
- Remove the getBackend method (vponcova)
- Add doc to make a release in a mock environment (jkonecny)
- Support in our scripts creating release in a mock (jkonecny)
- Add dependencies to make a new release to dependency_solver (jkonecny)
- Make the pyanaconda/image.py more pep8 (jkonecny)
- Test image repodata folder based on treeinfo file (jkonecny)
- Use var instead of strings in findFirstIsoImage (jkonecny)
- Use new InstallTreeMetadata instead of TreeInfo (jkonecny)
- Add InstallTreeMetadata class (jkonecny)
- Move DEFAULT_REPOS to the constants (jkonecny)
- Don't check for firmware compatibility to enable BootLoaderSpec support
(javierm)
- Update kernel command line parameters in BLS files (javierm)
- Add support for GRUB_ENABLE_BLSCFG and inst.noblscfg (pjones)
- Get rid of new-kernel-pkg invocations (pjones)
- Minor pylint cleanups (pjones)
- Load configuration files from /etc/anaconda/conf.d (vponcova)
- Let the DBus launcher to set up the modules (vponcova)
- Start modules that are enabled in the configuration file (vponcova)
- Enable the DBus modules and addons via the configuration file (vponcova)
- Remove flags from anaconda_logging (vponcova)
- Remove blivet-specific flags from pyanaconda.flags (vponcova)
- The armplatform option is deprecated (vponcova)
- Create a class for the Anaconda bus connection (vponcova)
- Fix local repo files aren't enabled (#1636739) (jkonecny)
- Write RPM tests for the Anaconda configuration file (vponcova)
- Write tests for the configuration support (vponcova)
- Create a class for handling the Anaconda configuration (vponcova)
- Provide a better support for handling the configuration files (vponcova)
- Create the Anaconda configuration file (vponcova)
- nvdimm: update ks data for actions in UI (rvykydal)
- nvdimm: use pykickstart constant for setting reconfigure mode (rvykydal)
- Revert "Don't allow booting from nvdimm devices" (rvykydal)
- Add --no-pip to setup-mock-test-env script (jkonecny)
- Fix error message in setup-mock-test-env script (jkonecny)
- Add shortcut function to get dependency script (jkonecny)
- Add install-pip parameter to setup-mock-test-env (jkonecny)
- Small optimalization in setup-mock-test-env (jkonecny)
- Add package installation from pip for test script (jkonecny)
- Fix wrong pylint false positive regex (jkonecny)
- Adjust to some DNF 3.6 changes (#1637021) (mkolman)
- Ignore errors when trying to activate unsupported swaps (#1635252) (vtrefny)
- Add option to set kernel.hung_task_timeout_secs option (rvykydal)
- Move the glade adaptor to a separate plugin (dshea)
- Fix strings not marked for translation (jkonecny)
- Drop attempt to add 'nocrypto' to tsflags (awilliam)
- Fix librepo logging with new DNF (jkonecny)
- Revert "Remove librepo imports from Anaconda (#1626609)" (jkonecny)
- Set the VNC password directly (#1592686) (vponcova)
- Update the spoke for unsupported hardware in TUI (#1601545) (vponcova)
- Update the dialog for unsupported hardware in GUI (#1601545) (vponcova)
- Support detection of kernel taints (vponcova)
- Fix the rescue mode (#1631749) (vponcova)
- Fix the sanity check verify_gpt_biosboot (#1593446) (vponcova)
- Flags shouldn't process the kernel options (vponcova)
- Fully support the inst.gpt option (vponcova)
- Don't set Anaconda-specific flags in Blivet (vponcova)
- Remove the class for kernel arguments from pyanaconda.flags (vponcova)
- Remove unused false positives (vponcova)
- Don't connect to signals of the Network Manager DBus objects (#1582233)
(vponcova)
- Fix documentation for setting Pykickstart command version (mkolman)
- Don't try to get hostnamed proxy in non-installer-image environments
(#1616214) (rvykydal)
- Use realm data in UI (vponcova)
- Use realm data in the DBus module (vponcova)
- Create a DBus structure for realm data (vponcova)
- Add support for DBus structures (vponcova)
- docs/commit-log.rst: Don't wrap example firstlines (ferdnyc)
- Detect that there is not enough space on a device (#1613232) (vponcova)
- Add Silverblue InstallClass (jkonecny)
- Save lsblk output to the Anaconda traceback file (vtrefny)
- Remove librepo imports from Anaconda (#1626609) (jkonecny)
- DNF 3.5 compatibility (mkolman)
- Use the default LUKS version for auto partitioning (#1624680) (vponcova)
- Remove the testing flag (vponcova)
- Fix crash in tui when default partitioning scheme is not supported.
(rvykydal)
- Fix pylint errors (vponcova)
- Add libtool build dependency (jkonecny)
- Remove shebang from DUD test (jkonecny)
- Add inst.addrepo documentation for HD variant (jkonecny)
- Warn when repo names are not unique (jkonecny)
- HD addon repos have mount directories permanent (jkonecny)
- Unmount hard drive additional repositories (jkonecny)
- Move RepoData copy creation to the RepoData class (jkonecny)
- Show empty file protocol on HD addon repo fail (jkonecny)
- Mount and use HDD additional repositories (jkonecny)
- Separate _find_and_mount_iso from _setup_media (jkonecny)
- Load hard drive repo type from inst.addrepo (jkonecny)
- Do not fail if .discinfo file can't be read (jkonecny)
- Use productmd to parse .discinfo file (jkonecny)
- Add payload sources tests (jkonecny)
- Cleanup payload tests source file (jkonecny)
- Add documentation for inst.addrepo boot option (jkonecny)
- Add additional repositories to KS data (jkonecny)
- Use new source solution (jkonecny)
- Add payload sources implementation (jkonecny)
- Don't resize a device if the size is same as the old size (#1572828)
(vponcova)
- Mark disks with additional repos as protected (jkonecny)
- Support boot args parsing to list (jkonecny)
- Add inst.addrepo new options (jkonecny)
- Make parenthesis consistent (jkonecny)
- Remove unused parameter from live_startup method (jkonecny)
- Disable treeinfo based repos only once (jkonecny)
- Disable treeinfo repos when base repo change (jkonecny)
- Treeinfo repos can't be changed nor removed (jkonecny)
- Add all repositories from the treeinfo file (jkonecny)
- Load base repository location from treeinfo (jkonecny)
- Add limited file:// protocol to GUI Source spoke (jkonecny)
- Add BaseOS between default base repositories (jkonecny)
- Split _setupInstallDevice method in payload (jkonecny)
- Check the LUKS2 memory requirements (vponcova)
- Add an option for choosing version of LUKS in GUI (vponcova)
- Add tests for LUKS2 in the auto partitioning module (vponcova)
- Apply the LUKS2 options from the auto partitioning module (vponcova)
- Support LUKS2 options in the auto partitioning module (vponcova)
- Support LUKS2 options in logvol, part and raid commands (vponcova)
- Enable to set a default version of LUKS (vponcova)
- Update dependencies and kickstart commands to support LUKS2 (#1547908)
(vponcova)
- Revert back to running DNF in a subprocess (mkolman)
- Use SimpleConfigFile to get PLATFORM_ID from /etc/os-release (mkolman)
- Fix a 5 year old typo in the spec file (mkolman)
- Use wwn attr instead of removed wwid. (#1565693) (dlehman)
- Bump required DNF version (mkolman)
- Fix some small issues with the platform id patch (mkolman)
- Set platform id for DNF (mkolman)
- Fix crash when software environment is False (jkonecny)
- Allow to delete all file systems used by Unknown (#1597199) (vponcova)
- DD: Use text mode when calling tools with subprocess (rvykydal)
- Update RHEL placeholder names (mkolman)
- Typo fixup (rvykydal)
- Define if blivet-gui is supported via installclasses (rvykydal)
- Offer Blivet-GUI partitioning only if supported (rvykydal)
- Only show the "closest mirror" source option where appropriate (mkolman)
- Starting from 3.0 DNF expects strings in comps queries (mkolman)
- Use the manual partitioning module in TUI (vponcova)
- Use the manual partitioning module in UI (vponcova)
- Add tests for the manual partitioning module (vponcova)
- Create the manual partitioning module (vponcova)
- Reserve enough static space for 2 lines in spoke status on hub (#1584160)
(rvykydal)
- Fix disable additional repositories (jkonecny)
- Show better messages for NoSuchPackage and NoSuchGroup (#1599190) (vponcova)
- Bootloader stage2 can't be on btrfs on rhel (#1533904) (rvykydal)
- Handle new module specific error states (mkolman)
- Handle missing package errors reported by the install_specs() function
(mkolman)
- Initial module enablement and installation support (mkolman)
- Use productmd library to parse .treeinfo (#1411673) (jkonecny)
- Import kickstart classes as version-less in the dracut script (vponcova)
- Use only version-less kickstart classes (vponcova)
- Define version-less variants of kickstart classes (vponcova)
- Pylint should skip the file livepayload.py (vponcova)
- Fix pylint errors (vponcova)
- Change the pop-up text with the pre-release warning (#1542998) (vpodzime)
- Sort categories on the hub by defined order (#1584160) (rvykydal)
- Show a note about EULA where relevant (mkolman)
- Change message log level to INFO when adding repo (jkonecny)
- Set packaging log level to DEBUG by default (jkonecny)
- Remove the python-wrapt dependency (vponcova)
- Do not use capitals for spoke names (#1584160) (rvykydal)
- Wrap category label and add space between columns (#1584160) (rvykydal)
- Use 32 px icons (instead of 16 px) on hubs (#1584160) (rvykydal)
- Replace deprecated dracut options for booting with ibft. (rvykydal)
- Improve handling of unsupported filesystems in UI. (rvykydal)
- Reserve two lines for status message (#1584160) (rvykydal)
- Use three spoke columns on hub for better scaling (#1584160) (rvykydal)
- Make pyanaconda.dbus.typing work with Python 3.7 (#1598574) (awilliam)
- Protected devices might be hidden (#1561766) (vponcova)
- fstab: include a note about systemctl daemon-reload (zbyszek)
- Access the ZFCP module only on s390x (vponcova)
- Tell libreport if it is a final release or not (#1596392) (vpodzime)
- bootloader: GRUB2: Set menu_auto_hide when enabled by the instClass
(hdegoede)
- installclass: Add bootloader_menu_autohide property (hdegoede)
- Add tests for the zFCP module (vponcova)
- Handle the zfcp command in the zFCP module (vponcova)
- Use the zFCP discovery task in UI (vponcova)
- Create the zFCP discovery task (vponcova)
- Create the zFCP module (vponcova)
- Add tests for the DASD module (vponcova)
- Run the DASD formatting task in UI (vponcova)
- Extend the sync_run_task method with a callback (vponcova)
- Create a task for formatting DASDs (vponcova)
- Run the DASD discovery task from UI (vponcova)
- Create a task for discovering DASDs (vponcova)
- Create the DASD module (vponcova)
- Add tests for the language installation task (vponcova)
- Run an installation task to install a language (vponcova)
- nvdimm: fix crash on non-block devices (rvykydal)
- Wait for kickstart modules to quit (vponcova)
- Ask for a default passphrase if required (vponcova)
- Add support for setting different types of passwords in TUI (vponcova)
- Add tests for changes in tasks and the install manager (vponcova)
- Add a simple installation task in the Baz module (vponcova)
- Update the boss classes (vponcova)
- Update the base clases for modules (vponcova)
- Use the system installation task in the install manager (vponcova)
- Add the system installation task (vponcova)
- Add methods for running remote DBus tasks (vponcova)
- Improved base clases for DBus tasks (vponcova)
- Do not manually create LUKSDevice when unlocking a LUKS format (vtrefny)
- Fix pylint errors (vponcova)
- Skip the pylint check for the bootloader.py (vponcova)
- Enable DNF depsolver debugging in debug mode (mkolman)
- Don't reset locale of our DBus daemon (vponcova)
- Close the DNF base later (#1571299) (vponcova)
- Add 10% for storage metadata to the total required space (#1578395)
(vponcova)
- Add hook to prevent mistake upstream pushes (jkonecny)
- Revert "WIP" (vponcova)
- WIP (vponcova)
- Set locale to en_US.UTF-8 in every module (#1575415) (vponcova)
- Move initial module configuration to the init function (vponcova)
- Fix the mount command (vponcova)
- Use the auto partitioning module in UI (vponcova)
- Only check space during a tui kickstart if ksprompt is enabled (bcl)
- Fix can't exit TUI storage spoke (jkonecny)
- Use PROCESSED_AND_CLOSE and PROCESSED_AND_REDRAW (jkonecny)
- Remove not required PROCESSED return (jkonecny)
- Remove PROCESSED from refresh method (jkonecny)
- nvdimm: make debug messages more clear (rvykydal)
- nvdimm: use libblockdev enum to check namespace mode (rvykydal)
- Add data loss warning to nvdimm reconfigure dialog. (rvykydal)
- Add UI feedback for disk repopulating after nvdimm reconfiguration.
(rvykydal)
- Fix ignoring of nvdimm devices (rvykydal)
- Don't allow booting from nvdimm devices (rvykydal)
- Improve UI feedback for invalid boot on non-iBFT iSCSI devices. (rvykydal)
- Add inst.nonibftiscsiboot boot option. (rvykydal)
- Use only devices specified by nvdimm command for installation. (rvykydal)
- Add option to reconfigure nvdimm devices into sector mode. (rvykydal)
- Allow only devices in sector mode to be selected. (rvykydal)
- Add nvdimm devices to Advanced Storage spoke. (rvykydal)
- Add kickstart support for nvdimm reconfiguration to sector mode. (rvykydal)
- Ignore nvdimm disks which are not in sector mode. (rvykydal)
- Do not ignore nvdimm (pmemX) devices (rvykydal)
- Update the pykickstart commands (vponcova)
- Fix firewall DBUS module API usage (#1577405) (mkolman)
- Fix formatting in the TUI storage spoke (jkonecny)
- Fix TUI crash in mountpoint assignment (#1564067) (jkonecny)
- Fix KS logvol metadata and chunksize parameters (#1572511) (jkonecny)
- Show correct bootloader error on the MacEFI platform (vponcova)
- Revert "Fix broken kickstart command test" (rvykydal)
- Support fcoe --autovlan option (#1564096) (rvykydal)
- Increase module startup timeout to 600 seconds (mkolman)
- Fix name of the Zanata Python client package (mkolman)
- Add tests for the auto partitioning module (vponcova)
- Create the auto partitioning module (vponcova)
- Add the firewall submodule (mkolman)
- Once again fix cmdline error handling. (#1360223) (sbueno+anaconda)
- Extend the timeout period to 180s in the case of cmdline error. (#1360223)
(sbueno+anaconda)
- Fix the clearpart test with disklabel option (vponcova)
- The specified nosetests failed to run (vponcova)
- Show correct root account locked status in reconfig mode (#1507940) (mkolman)
- Add missing lines and modularization only log to test coverage (jkonecny)
- Remove makebumpver dependency from spec file (jkonecny)
- network module: use connectivity checking in anaconda (rvykydal)
- network module: add connectivity checking (rvykydal)
- Permit adding disabled external repos to installation. (riehecky)
- Handle empty active attribute for consoles (#1569045) (mkolman)
- Support temporary kickstart generating (vponcova)
- Create the dynamic module User (vponcova)
- Select Workstation install class for Workstation live (#1569083) (awilliam)
- Rename the main module User to Users (vponcova)
- Save logs to result folder after rpm-tests (jkonecny)
- Add Installed pyanaconda tests (jkonecny)
- Fix name of the RPM test (jkonecny)
- Support running just chosen rpm test (jkonecny)
- Add test cache files to gitignore (jkonecny)
- Move test install test from Makefile to rpm tests (jkonecny)
- Create structure to run rpm tests (jkonecny)
- Move all nosetests to separate directory (jkonecny)
- Fix broken kickstart command test (jkonecny)
- Fix broken kickstart command test (jkonecny)
- localization: use LanguageKickstarted module property (#1568119) (rvykydal)
- Start only the specified kickstart modules (#1566621) (vponcova)
- Use the Bootloader module in UI (vponcova)
- Add tests for the bootloader module (vponcova)
- Create the bootloader module (vponcova)
- rpmostreepayload: do not require network for dvd installation (#1565369)
(rvykydal)
- Fix double logging to stdout (vponcova)
- Don't try to create required partitions if there are none (vponcova)
- Bump simpleline version (mkolman)
- Do not redraw screen after text YesNo dialog (#1557951)(jkonecny)
- Revert "Adapt to a new simpleline changes (#1557472)(jkonecny)
- authselect: enable silent last log (pbrezina)
- authselect: fix typo to enable fingerprint authentication (pbrezina)
- Fix forgotten usage of the selinux kickstart command (vponcova)
- Fix tests for the storage module (vponcova)
- Use the disk selection and initialization modules in UI (vponcova)
- Enable to use object identifiers instead of object paths (vponcova)
- Create the disk initialization and disk selection modules (vponcova)
- Use watch_property to watch changes of DBus properties (vponcova)
- Better organize the base classes for modules (vponcova)
- Fixed KS forcing zerombr onto RO disk (japokorn)
- Add tests for the kickstart specifications (vponcova)
- Standardize calls to parent via super() (riehecky)
- Fix 'isDisk' property name (#1558906) (vtrefny)
- Make the class for removed kickstart commands more strict (vponcova)
- Fix the progress bar steps (vponcova)
- Use enum for the first boot action (vponcova)
- Use enum for the SELinux modes (vponcova)
- datetime spoke: still pass ksdata to NTPconfigDialog (UIObject) (rvykydal)
- Write rootpw command to kickstart (#1557529) (mkolman)
- Don't make safe to observe services on buses that don't run (vponcova)
- Add the LanguageKickstarted property (vponcova)
- Don't autoquit by default if the last hub is empty (#1553935) (mkolman)
- Use the Services module in UI (vponcova)
- Create the Services module (vponcova)
- Enable hibernation only on x86 (#1554345) (vponcova)
- Add the Storage module with no API (vponcova)
- Add the Payload module with no API (vponcova)
- Remove DBus modules Foo and Bar (vponcova)
- network module: fix accessing org.freedesktop.hostname1 for current hostname
(rvykydal)
- network module: add basic test (rvykydal)
- Add prepare command to setup-mock-test-env script (jkonecny)
- Mark partition live device's disk protected. (#1524700) (dlehman)
- Remove useless constants from pyanaconda.dbus.constants (vponcova)
- Use identifiers to get observers and proxies (vponcova)
- Remove the publish method from DBus interfaces (vponcova)
- Replace constants in publish and register methods (vponcova)
- Replace constants in DBus interface names (vponcova)
- Define DBus errors with the dbus_error decorator (vponcova)
- Use namespaces and identifiers to describe Anaconda DBus objects (vponcova)
- Add support for identification of DBus objects and services (vponcova)
- User module should parse only rootpw for now (#1553488) (vponcova)
- localization module: plug localization module into keyboard GUI spoke
(rvykydal)
- localization module: add KeyboardKickstarted property (rvykydal)
- localization module: add KS support for keyboard command (rvykydal)
- localization module: don't use Kickstarted so another command can be added
(rvykydal)
- Fix release docs (mkolman)
- network: set TYPE value in ifcfg from kickstart in initrmfs (rvykydal)
- Make formatting consistent in AnacondaWidgets.xml (riehecky)
- Use the user DBUS module in the UI (mkolman)
- Use the user DBUS module for the rootpw command in kickstart.py (mkolman)
- Add initial user DBUS module (mkolman)
- Add tests for the Security module (vponcova)
- Use the Security module in UI (vponcova)
- Don't send empty kickstart to DBus modules (vponcova)
- Add the Security module (vponcova)
- Fix makeupdates script to work with new DBus structure (jkonecny)
- Fix Makefile of the kickstart manager (vponcova)
- Fix check if dbus daemon quit properly (jkonecny)
- Remove check if dbus is running (#1551096) (jkonecny)
- Use Anaconda's special env variable for dbus address (#1551096) (jkonecny)
- Migrate Anaconda to our private dbus session (#1551096) (jkonecny)
- localization module: use l12 shortcut for module name in UI (rvykydal)
- localization module: replace ksdata.lang with the module in anaconda.
(rvykydal)
- localization module: add KS support for lang command (rvykydal)
- Return restorecon utility to Fedora 28 mock (jkonecny)
- Include dbus.log when exporting logs (mkolman)
- Reorganize pyanaconda.modules.boss (vponcova)
- Move all DBus errors to pyanaconda.modules.common.errors (vponcova)
- Move common classes and functions to pyanaconda.modules.common (vponcova)
- Close DBus log file when quitting DBus session (jkonecny)
- Enable payload configuration for Install classes (jkonecny)
- Rename files that provide kickstart specifications (vponcova)
- Move the kickstart specification to pyanaconda.core.kickstart (vponcova)
- Start and quit Boss properly (jkonecny)
- Make class from dbus.launcher module (jkonecny)
- Add the kernel option resume= by default (#1206936) (vponcova)
- Use observers to access the hostname service (vponcova)
- Make safe to observe services on buses that don't have to run (vponcova)
- DBus logs are now saved to /tmp/dbus.log (jkonecny)
- Add tests for toplevel installclass attribs (riehecky)
- Wait for DBus modules for longer time (vponcova)
- Drop dependency on authselect and firewalld (vponcova)
- Fix kickstart version test (vponcova)
- Authconfig is replaced with authselect (#1542968) (vponcova)
- Add support for different message buses (vponcova)
- Fix makeupdates script (vponcova)
- Set up basic logging for DBus modules (vponcova)
- Remove get_dbus_module_logger (vponcova)
- Fix logging of the DBus modules (vponcova)
- Fix the reimport error (vponcova)
- Fix the network module specification (vponcova)
- network module: update_network_data test (rvykydal)
- network module: use Module.Kickstarted instead of ksdata.seen (rvykydal)
- network module: use for hostname in tui (rvykydal)
- network module: handle current hostname (rvykydal)
- network module: handle ksdata.network.hostname (rvykydal)
- network module: add module skeleton (rvykydal)
- Log changes in the kickstart modules. (vponcova)
- Use the Timezone module in UI. (vponcova)
- Start Boss from Anaconda (jkonecny)
- Do not use System DBus (jkonecny)
- Remove anaconda-boss.service (jkonecny)
- Move Anaconda dbus services and confs to session dbus (jkonecny)
- Run DBus session if not present (jkonecny)
- Change pykickstart version (vponcova)
- Move system-logos dependency from anaconda-core to anaconda-gui (mkolman)
- makebumpver: fix parsing of -m option (rvykydal)
- makebumpver: fix -i option (rvykydal)
- Fix tests of the Timezone module (vponcova)
- installclass: add comments to server install class (dusty)
- Don't use deprecated formatErrorMsg (vponcova)
- Use the KickstartError attributes (vponcova)
- kickstart: "clearpart --list" does not work (#1410335) (marcel)
- Use handler in the Timezone module (vponcova)
- Fix the specification of the Bar module (vponcova)
- Use the KickstartHandler class (vponcova)
- Check the proxy attribute before accessing it (vponcova)
- Check the noverifyssl attribute before accessing it (vponcova)
- Don't access the url attribute (#1530428) (vponcova)
- Use Fedora Server default partitioning in Atomic (jkonecny)
- Clean code of Atomic install class (jkonecny)
- Migrate Atomic install class (#1491287) (jkonecny)
- Move Atomic install class to Anaconda (#1491287) (#1536853) (jkonecny)
- Make sure that fetch_url is defined. (vponcova)
- Change pykickstart version. (vponcova)
- Do not deepcopy the kickstart data in the storage (vponcova)
- Replace deepcopy of the method command (vponcova)
- Use pykickstart 3 (vponcova)
- Provide comprehensive log messages about the display mode (vponcova)
- Fix missing logging in some cases of update of ONBOOT value. (rvykydal)
- Fix tests for the timezone module. (vponcova)
- Add the Kickstarted property to the kickstart modules. (vponcova)
- Connect to the observed service and other stuff. (vponcova)
- Prevent 99-copy-lgs.ks from exiting with a 1 (bcl)
- Rename SetUTC to SetIsUTC in the timezone module. (vponcova)
- Move how to use setup-mock-test-env script to help (jkonecny)
- Add --init as new parameter to setup-mock-test-env (jkonecny)
- Initialize the thread manager at the first import. (vponcova)
- Added tests for the timezone module and other. (vponcova)
- Remove 'i' from iutil module (jkonecny)
- Remove 'i' from isignal module (jkonecny)
- Move isignal module to core/isignal (jkonecny)
- Extract process watch functions to a static class (jkonecny)
- Move regexes module to core/regexes (jkonecny)
- Move i18n module to core/i18n (jkonecny)
- Move constants module to core/constants (jkonecny)
- Move iutil module to core/iutil (jkonecny)
- Move async_utils to core/async_utils (jkonecny)
- Replace gobject GLib by our core/glib (jkonecny)
- Rename run_in_main_thread to run_in_loop (jkonecny)
- Add Timer and PidWatcher abstraction above GLib (jkonecny)
- Create abstraction above GLib event loop (jkonecny)
- Add core/glib module for GLib access (jkonecny)
- Ignore errors for KickstartSpecificationHandler. (vponcova)
- Try to use the PropertiesChanged signal. (vponcova)
- Add timezone module. (vponcova)
- Collect properties changes before emit. (vponcova)
- Use Ping method from the standard interface. (vponcova)
- Recognize members of standard interfaces. (vponcova)
- Add an object observer with cached properties (vponcova)
- Rename modules with Fedora install classes. (vponcova)
- Add support for Variant in .buildstamp (vponcova)
- Fix the Bar module. (vponcova)
- Add pykickstart version to branching policy doc (jkonecny)
- Remove `unstable` branch from documentation (jkonecny)
- Move system-logos to anaconda-core (#1529239) (bcl)
- Modules should use the proxy pattern. (vponcova)
- Variants need to be instances of the Variant class (vponcova)
- kickstart: support firewall --use-system-defaults (#1526450) (dusty)
- Check payload is set before accessing its data (#1524785) (mkolman)
- Do not fail when test are failing in setup-env script (jkonecny)
- Support running multiple commands at once (jkonecny)
- Support copy Anaconda result dir out of mock (jkonecny)
- Remove dependencies from Makefile (jkonecny)
- Add path to Anaconda in mock to constant (jkonecny)
- Properly exclude packages from the install set (ngompa13)
- Add the _prepare_command helper function to setup-test-env (jkonecny)
- Add run-tests parameter to setup-test-env script (jkonecny)
- Remove /anaconda in mock before copying new one (jkonecny)
- Remove spurious echo call from tmux service file (#1526861) (mkolman)
- Restore fix for RHBZ #1323012 (`set_name` not `setName`) (awilliam)
- Fix Makefile for modules/[foo,bar]/tasks and for install_manager (rvykydal)
- Make passing kickstart to boss more visible. (rvykydal)
- Add tests for KickstartManager. (rvykydal)
- Add kickstart dispatching to anaconda. (rvykydal)
- Add kickstart dispatching to local boss run script (rvykydal)
- Add KickstartManager for Boss. (rvykydal)
- Add method for getting line mapping from kickstart elements to kickstart
(rvykydal)
- Add info about handled kickstart commands to modules (rvykydal)
- Add missing Makefile for kickstart_dispatcher (rvykydal)
- Use observers in the install manager (vponcova)
- Modify readme file for tests (jkonecny)
- Do not bump version when testing installation (jkonecny)
- Add set up test environment script (jkonecny)
- Add dependency solver script (jkonecny)
- Differentiate upstream and build-time version (#1493952) (mkolman)
- Fix bad bash '*' expansion when loading kernel modules (#1525841) (jkonecny)
- Fix connection to a signal in the install manager (vponcova)
- Use the InterfaceTemplate in the InstallationInterface (vponcova)
- Use the InterfaceTemplate in the TaskInterface (vponcova)
- Add a base class for DBus interfaces (vponcova)
- Update module manager to use observers (vponcova)
- Add DBus observers for better access to proxies. (vponcova)
- Remove running CI in mock from Makefile (jkonecny)
- Add xfsprogs and git to the test requirements (jkonecny)
- The gettext-devel is required by autogen (jkonecny)
- Remove kickstart-test dependencies from test requires (jkonecny)
- Unregister and unpublish all DBus services and objects (vponcova)
- Add tests for InstallManager (jkonecny)
- Add tests for Tasks (jkonecny)
- Add run_in_glib decorator for tests (jkonecny)
- Instantiate and publish InstallManager in Boss (jkonecny)
- Add Makefile for install_manager (jkonecny)
- Implement InstallManager with interface (jkonecny)
- Init threading in modules (jkonecny)
- Provide installation tasks from modules (jkonecny)
- Remove *.Anaconda.Modules interface from Boss (jkonecny)
- Implementing example tasks for modules (jkonecny)
- Add Makefile for Task (jkonecny)
- Base implementation of Task (jkonecny)
- Add Task interface class (jkonecny)
- Remove in-memory kickstart representation from traceback file (#1519895)
(mkolman)
- Support call_when_thread_terminates in ThreadManager (jkonecny)
- Change gtk_action_wait/nowait as general use decorators (jkonecny)
- Add controllable loop to run_boss_locally script (jkonecny)
- Tweak run_boss_locally script (jkonecny)
- Enable SE/HMC file access to repo (vponcova)
- Change string formatting to format method (jkonecny)
- Pass handler instance, not class to SplitKickstartParser (rvykydal)
- Add kickstart parser for splitting kickstart (rvykydal)
- Fix unit tests (mkolman)
- Fixes in makefiles (vponcova)
- Use the input_checking module for TUI password validation (mkolman)
- Use the input_checking module for user checking (mkolman)
- Use the input_checking module for root password checking (mkolman)
- Use the input_checking module for checking the LUKS passphrase (mkolman)
- Reflect GUISpokeInputCheckHandler changes in installation source spoke
(mkolman)
- Convert the input checking helpers to use the input_checking module (mkolman)
- Provide more robust method of using the warning message bar (mkolman)
- Remove the validatePassword() method (mkolman)
- Add new input checking module (mkolman)
- fixup! Migrate Workstation InstallClass to anaconda (sgallagh)
- Handle an invalid install class style sheet (vponcova)
- Enhance password checking constants (mkolman)
- Fix interactive defaults (mkolman)
- Modify the PYTHONPATH in run_boss_locally (vponcova)
- Replace get_bus with the class DBus (vponcova)
- Migrate Workstation InstallClass to anaconda (sgallagh)
- Point at new path for fedora-server.css (sgallagh)
- Rename dbus_constants to constants (vponcova)
- Add the boot option inst.ks.all (vponcova)
- Add the boot option inst.stage2.all (vponcova)
- Remove errors for mounting and unmounting (vponcova)
- Override the right method in the task (vponcova)
- Remove useless code (vponcova)
- Support timeout and retries options in %packages section (vponcova)
- Fix device_name_is_disk to fully support raid devices (vponcova)
- Onlyuse devices of the ignoredisk command should be only disks (vponcova)
- Add the boot option inst.xtimeout (vponcova)
- Do not shadow build-in module variable (jkonecny)
- Module manager is replaceable (jkonecny)
- Remove pyanaconda.constants_text module (vponcova)
- Bump Blivet GUI version (mkolman)
- Change path to start-module script when running locally (mkolman)
- Handle DBUS module related files in makeupdates (mkolman)
- Handle DBUS_STARTER_ADDRESS not being defined (mkolman)
- Use start-module script in DBUS service files (mkolman)
- Add a DBUS module startup script (mkolman)
- Add Makefile.am for DBUS modules an addons (mkolman)
- Add the setup-updates script (mkolman)
- Add __init__.py file to anaconda/modules (mkolman)
- Add a unit file for Boss startup (mkolman)
- Really install all the right packages on Mac UEFI installs (awilliam)
- Refactor DASD formatting and support detection of LDL DASDs. (vponcova)
- Remove unused import sys from run_boss_locally script (jkonecny)
- Fix blivet imports in the Fedora Server install class (#1513024) (vponcova)
- Update the use of suggest_container_name method (vponcova)
- Devicetree doesn't have protected_dev_names (vponcova)
- Add pyanaconda.dbus to Makefile (vponcova)
- Add pyanaconda.storage to Makefile (#1511735) (vponcova)
- network: GUI, be more robust when displaying vlan parent and id (#1507913)
(rvykydal)
- network: GUI, fix lookup of existing device configurations (#1507913)
(rvykydal)
- network: GUI, don't crash on added vlan without device name specified
(#1507913) (rvykydal)
- Add a script for running Boss & modules locally (mkolman)
- Add an example addon (mkolman)
- Add DBUS module examples (mkolman)
- Add Boss (mkolman)
- Add a base class for DBUS modules (mkolman)
- Add .service and .conf files for the DBUS modules (mkolman)
- Add constants for DBUS module namespaces (mkolman)
- Add support for logging from DBUS modules (mkolman)
- Add the get_bus() method (mkolman)
- Remove storage check for too small swap (#1466964) (vponcova)
- Migrate fedora-server installclass into the anaconda repository (#1466967)
(rvykydal)
- Bump required Blivet version to 3.0 (mkolman)
- Add modular server repo to the base repositories (#1506894) (jkonecny)
- Split addon and environment refresh in software TUI (jkonecny)
- Fix changing source don't erase old environment TUI (#1505090) (jkonecny)
- Add logging to TUI software selection spoke (#1505090) (jkonecny)
- Do not try to use protected disks for autopart (vtrefny)
- Adapt new storage tui spoke to storage code move. (dlehman)
- Update blivet upstream URL in testing README. (dlehman)
- Adapt to devicefactory API change. (dlehman)
- Adapt to removal of default rounding in blivet.size.Size. (dlehman)
- Use anaconda's logic for ostree sys/physical root. (dlehman)
- Adapt to removal of blivet.udev.device_is_realdisk. (dlehman)
- Adapt to move of disklabel type logic into DiskLabel. (dlehman)
- Move blivet.partspec into pyanaconda.storage. (dlehman)
- Move blivet.platform to pyanaconda.platform. (dlehman)
- Fix traceback from mocked partitions in clearpart test. (dlehman)
- Move blivet.osinstall to pyanaconda.storage. (dlehman)
- Move autopart from blivet to pyanaconda.storage. (dlehman)
- Bump simpleline version requires (jkonecny)
- Remove DataHolder class (jkonecny)
- Remove EditTUISpoke EditTUIDialog and EditTUISpokeEntry (jkonecny)
- Replace EditTUI* from the TUI Storage spoke (jkonecny)
- Replace EditTUI* from the TUI User spoke (jkonecny)
- Replace EditTUI* from the TUI Source spoke (jkonecny)
- Replace EditTUI* from the TUI Network spoke (jkonecny)
- Password spoke is using PasswordDialog now (jkonecny)
- Return default policy if nothing match (jkonecny)
- Add Dialog and PasswordDialog TUI objects (jkonecny)
- Remove EditTUIDialog from time_spoke (jkonecny)
- packaging: clear downloaded packages repo cache before using it (#1480790)
(rvykydal)
- Do substitutions only after translating the string (mkolman)
- Fix a translation check error (mkolman)
- Do not run commands in messages in Makefile (jkonecny)
- Fix storage spoke completeness checking (#1496416) (rvykydal)
- Add changelog entries from the unstable branch (mkolman)
- Log when we are executing command in chroot (jkonecny)
- Use name instead of index in TUI env selection (#1495204) (jkonecny)
- Fix missing container in TUI source spoke (#1494801) (jkonecny)
- Add MOCK_EXTRA_ARGS to Makefile (jkonecny)
- tui source spoke: initialize nfs values when switching to nfs (rvykydal)
- Deselect encryption when switching to blivet-gui partitioning (vtrefny)
- Add 2 spaces between functions in iutil (jkonecny)
- rpmostreepayload: Fix logic for copying of EFI data (walters)
- rpmostreepayload: Avoid recursing for fstab mounts (walters)
- payload: Add handlesBootloaderConfiguration(), teach bootloader.py (walters)
- Fix missing id to name environment transition (#1491119) (jkonecny)
- Fix test for unset TUI software environment (#1491119) (jkonecny)
- Rename processingDone to processing_done variable (jkonecny)
- network: add support for kickstart --bindto=mac for virtual devices (#1328576) (rvykydal)
- network: support mac bound network settings as first class (#1328576) (rvykydal)
- network: add support for kickstart --bindto=mac for wired devices (#1328576) (rvykydal)
- Don't setup the hub twice (#1491333) (vponcova)
- rpmostreepayload: Substitute ${basearch} in ostreesetup ref (walters)
- Perform repo checks only when there are checks available. (rvykydal)
- Add support for repo --metalink (GUI) (#1464843) (rvykydal)
- Add support for repo --metalink (kickstart, tui) (#1464843) (rvykydal)
- Add inst.notmux option (dusty)
- Add missing dot to the availability status message (mail)
- Bump Simpleline version (jkonecny)
- Make EFIGRUB._efi_binary a property, not a method (awilliam)
- Better storing logs from build and tests (jkonecny)
- Provide a default install class. (vponcova)
- Do not use hidden install classes. (vponcova)
- Make geolocation with kickstart possible (#1358331) (mkolman)
- Run python-meh as modal in TUI (jkonecny)
- Use GLib event loop in the simpleline (jkonecny)
- TUI progress reporting is handled by show_all (jkonecny)
- Add efi_dir to the BaseInstallClass (#1412391) (vponcova)
- Use /usr/bin/python3 shebang once again (miro)
- Fix catch TUI not main thread exceptions (jkonecny)
- Document Anaconda branching workflow (mkolman)
- Use constants for version number bumps and additions (mkolman)
- Fix closest mirror now needs network (jkonecny)
- Fix restart payload thread in Network spoke GUI (#1478970) (jkonecny)
- Network spoke freeze when testing availability (#1478970) (jkonecny)
- Add support for adding version numbers to makebumpver (mkolman)
- Add support for major version bump to makebumpver (mkolman)
- Fix proxy settings badly used when testing repos (#1478970) (jkonecny)
- Remove the metacity theme. (vponcova)
- Add the option inst.decorated to allow title bar in GUI (vponcova)
- Move python3-gobject Requires to core (jkonecny)
- Return simpleline removed ipmi calls back (jkonecny)
- Use new list container from Simpleline (jkonecny)
- Remove old simpleline from anaconda (jkonecny)
- Ask multiple times for wrong input (jkonecny)
- Show TUI exception only first time (jkonecny)
- Add simpleline logger to the Anaconda (jkonecny)
- Modify TUI to use new Simpleline package (jkonecny)
- Make 64-bit kernel on 32-bit firmware work for x86 efi machines (pjones)
- Add missing gtk3 required version to spec file (jkonecny)
- Sort spec required versions alphabetically (jkonecny)
- Fix testing of the kickstart version (vponcova)
- Move the installclass command to the %%anaconda section. (vponcova)
- Fix SL install class to use right efi dir (riehecky)
- Fix accelerator key for blivet-gui partitioning (#1482438) (vtrefny)
- Add blivet-gui logs to python-meh file list (vtrefny)
- Remove the title bar in anaconda by default (#1468801) (vponcova)
- Add simple script to read journal with message code source and thread info. (rvykydal)
- Add support for automatic generating of DBus specification. (vponcova)
- Add support for generating XML (vponcova)
- Add support for DBus typing system (vponcova)
- dnfpayload: do not try to contact disabled repo (artem.bityutskiy)
- Add message to setup-test-env is ran (jkonecny)
- Use SHA256 instead of MD5 for repoMDHash (#1341280) (bcl)
- Add lorax-packages.log to bug report. (rvykydal)
- Use SHA256 instead of MD5 for repoMDHash (#1341280) (jkonecny)
- 80-setfilecons: Add a few paths (/var/run, /var/spool) (walters)
- Also capture anaconda-pre logs if they exist (riehecky)
- Don't mock modules with sys in unit tests (vponcova)
- logging: replace SyslogHandler with JournalHandler (rvykydal)
- Add setup-test-env target to the Makefile (jkonecny)
- Add tests for the install class factory (vponcova)
- Support for the installclass kickstart command (vponcova)
- Modules with install classes should define __all__ (vponcova)
- Refactorization of the installclass.py (vponcova)
- docs: minor fixups of release document (rvykydal)
- rescue: add RTD documentation (rvykydal)
- rescue: clean up method for mounting root (rvykydal)
- rescue: separate UI and execution logic (rvykydal)
- Make kickstart rescue command noninteractive. (rvykydal)
- Remove unused argument and code. (rvykydal)
- Install class shouldn't set the default boot fstype (#1463297) (vponcova)
- Store testing logs properly (jkonecny)
- Fix location of the blivet-gui user help (vtrefny)
- netowrk: fix noipv6 option check regression (#1464297) (rvykydal)
- Refactor imports in kickstart.py (jkonecny)
- Use context manager to check KickstartError (jkonecny)
- Bump version of Pykickstart and Blivet (#1113207) (jkonecny)
- Add XFS uuid changer (#1113207) (jkonecny)
- Support --when parameter in snapshot (#1113207) (jkonecny)
- Add snapshot support (#1113207) (jkonecny)
- Bump Blivet version (mkolman)
- Remove GUI logging prefixes from Network spoke (mkolman)
- Rename TUI spokes (mkolman)
- Rename GUI spokes (mkolman)
- Rename anaconda_argparse.py to argument_parsing.py (mkolman)
- Rename install_tasks.py to installation_tasks.py (mkolman)
- Rename install.py to installation.py (mkolman)
- Rename threads.py to threading.py (mkolman)
- Get special purpose loggers from anaconda_loggers (mkolman)
- Use structured logging in Anaconda modules (mkolman)
- Use unique 3 letter log level names (mkolman)
- Use constants for special purpose logger names (mkolman)
- Add the anaconda_loggers module (mkolman)
- Rename anaconda_log.py to anaconda_logging.py (mkolman)
- Add support for structured logging to the anaconda logger (mkolman)
- Make it possible to set filters for file handlers (mkolman)
- Add custom filter and formatter support for the syslog handler (mkolman)
- Add AnacondaPrefixFilter (mkolman)
- Fixes for Pylint 1.7 (vponcova)
- Add support for IPoIB in tui (#1366935) (rvykydal)
- Fix pylint unused import error (jkonecny)
- network: handle multiple connections for one device better (#1444887) (rvykydal)
- Fix setting errors and warnings in the StorageCheckHandler (vponcova)
- Add inst.waitfornet option (#1315160) (rvykydal)
- network: catch exception when reading in-memory connection being removed (#1439220) (rvykydal)
- Add support for DNF-2.5.0 (jkonecny)
- Fix simpleline_getpass related Pylint warning (mkolman)
- Provide access to simpleline App instance (mkolman)
- Make it possible to use a custom getpass() (mkolman)
- Set the default filesystem type from a kickstart file (vponcova)
- Adapt to our new daily builds of Anaconda (jkonecny)
- Provide access to simpleline App instance (mkolman)
- Make it possible to use a custom getpass() (mkolman)
- Perform recursive copying of driver disk RPM repo contents (esyr)
- network: fix setting hostname via boot options (#1441337) (rvykydal)
- Fix a typo in an error message (esyr)
- Use the function we already have for applying disk selection (#1412022) (rvykydal)
- Ignore disks labeled OEMDRV (#1412022) (rvykydal)
- network: create dracut arguments for iSCSI root accessed via vlan (#1374003) (rvykydal)
- Test if Anaconda can be installed inside of mock (jkonecny)
- Remove run_install_test test (jkonecny)
- rpmostreepayload: Handle /var as a user-specified mountpoint (walters)
- Fix the addon handlers for the checkbox (#1451754) (vponcova)
- Show the text of completions in the datetime spoke. (vponcova)
- Use new daily-blivet copr builds (jkonecny)
- Prevent TUI from crashing with a single spoke on a hub (mkolman)
- Make some missed adjustments to blivet API changes. (#1440134) (dlehman)
- Bump required version for blivet-gui (vtrefny)
- BlivetGuiSpoke: Set keyboard shortcuts for blivet-gui (#1439608) (vtrefny)
- BlivetGuiSpoke: Refresh blivet-gui UI after spoke is entered (vtrefny)
- Really fix with tmux 2.4 (version comparison was busted) (awilliam)
- Show or hide the content of the expander on Fedora (vponcova)
- itertools.chain can be iterated only once (#1414391) (vponcova)
- Use `time.tzset()` to apply timezone changes when we can (awilliam)
- Tweak epoch definition to fix system clock setting (#1433560) (awilliam)
- Optimize payload thread restart on network change (jkonecny)
- Add unit test for RepoMDMetaHash object (#1373449) (jkonecny)
- Make the formating in payload consistent (#1373449) (jkonecny)
- Fix Anaconda forces payload restart when network (not)change (#1373449) (jkonecny)
- Catch race-condition error reading from in-memory connection being removed (#1373360) (rvykydal)
- network tui: fix changing ipv4 config from static to dhcp (#1432886) (rvykydal)
- Allow setting up bridge for fetching installer image from kickstart (#1373360) (rvykyda)
- make anaconda working back again with tmux2.4 (pallotron)
- Trigger the entered signal only once the screen is shown (#1443011) (mkolman)
- Use constants in storage checker constraints. (vponcova)
- Gtk: Fix creating images from resources. (vponcova)
- Fix partial kickstart software selection in GUI (#1404158) (jkonecny)
- Removed unused code in the Software spoke (#1404158) (jkonecny)
- Fix selection logic in Software spoke (#1404158) (jkonecny)
- Fix Driver Disc documentation (#1377233) (jkonecny)
- Support DD rpm loading from local disk device (#1377233) (jkonecny)
- Gtk: Replace deprecated get_misc_set_alignment in widgets. (vponcova)
- Gtk: Replace deprecated Gtk.Viewport.get_v/hadjustment. (vponcova)
- Gtk: Replace deprecated methods. (vponcova)
- Set the info bar only once if the partitioning method changes. (vponcova)
- Fix pylint issue Catching too general exception Exception (jkonecny)
- Support --noboot and --noswap options in autopartitioning (#1220866) (vponcova)
- Support --nohome option in the autopartitioning (vponcova)
- Hide options based on storage configuration method (#1439519) (mkolman)
- Catch exception when reading from in-memory connection being removed (#1439051) (rvykydal)
- docs/boot-options.rst: Fix #dhcpd anchor (mopsfelder)
- docs/boot-options.rst: Remove trailing spaces (mopsfelder)
- Fix logging of the storage checker report. (vponcova)
- Fix a property name of luks devices in storage checking (#1439411) (vponcova)
- Bump required version for blivet-gui (vtrefny)
- Use newly created swaps after the installation (#1439729) (vtrefny)
- docs/boot-options.rst: Fix #dhcpd anchor (mopsfelder)
- docs/boot-options.rst: Remove trailing spaces (mopsfelder)
- Set default FS type for blivet-gui (#1439581) (vtrefny)
- Display progress for the post installation phase (mkolman)
- Display progress for the post installation phase (mkolman)
- Increase verbosity of lvmdump in pre logging script (#1255659) (jkonecny)
- Enable the install class to customize the storage checking (vponcova)
- Replace sanity check with more advanced storage checker (vponcova)
- Various log-capture script improvements (mkolman)
- Rename StorageChecker to StorageCheckHandler (vponcova)
- We should not have pyanaconda submodules on PYTHONPATH (vponcova)
- Lock empty root password during kickstart installation (#1383656) (mkolman)
- Use system Python when running Anaconda (mkolman)
- Remove unused false positives for pylint (vtrefny)
- Fix pylint error in BlivetGUI spoke (vtrefny)
- Add blivet-gui as requirement for the GUI package (vtrefny)
- Add a bottom bar to the Blivet GUI spoke (mkolman)
- Hide storage config spokes marked by SAM as visited (mkolman)
- Keep last used partitioning method selected (mkolman)
- Rollback planned storage changes if partitioning method changes (mkolman)
- Add blivet-gui spoke (vpodzime)
- docs: fix formating a bit for Links (Frodox)
- Fix a typo (mkolman)
- Polish unsupported filesystems in the custom spoke (jkonecny)
- Update dracut test for network --ipv6gateway (rvykydal)
- Correctly propagate --ipv6gateway to ifcfg files(#1170845) (mkolman)
- network: respect --activate value for bridge from kickstart (rvykydal)
- network: fix --activate for bridge slaves configured via %%pre ks (rvykydal)
- network: activate bridge for first network command in ks via %%pre (rvykydal)
- network: unify slave connection names for ks %%pre with ks and gui (rvykydal)
- network: bind slave connections to DEVICE, not HWADDR (#1373360) (rvykydal)
- Do not allow creating ntfs filesystem in custom spoke (vtrefny)
- Various minor formatting fixes (mkolman)
- PEP8 and refactoring for packaging (mkolman)
- PEP8 and refactoring for vnc.py (mkolman)
- PEP8 and refactoring for storage_utils.py (mkolman)
- PEP8 and refactoring for network.py (mkolman)
- PEP8 and refactoring for kickstart.py (mkolman)
- PEP8 and refactoring for image.py (mkolman)
- Cosmetic PEP8 and refactoring for flags.py (mkolman)
- PEP8 and refactoring for exception.py (mkolman)
- PEP8 and refactoring for bootloader.py (mkolman)
- PEP8 and refactoring for anaconda_log.py (mkolman)
- Validate dasd and zfcp user input (#1335092) (vponcova)
- network: use introspection data from libnm instead of libnm-glib (lkundrak)
- Use initialization controller for spoke initialization (mkolman)
- Add module initialization controller (mkolman)
- Fix link to the documentation in the README file (jkonecny)
- There is no thread for dasd formatting in tui. (vponcova)
- Move the (mkolman)
- Fix the status of the StorageSpoke for dasd formatting (#1274596) (vponcova)
- Always refresh the size of swap before autopartitioning. (vponcova)
- Run the space check only if the spokes are complete (#1403505) (vponcova)
- Ignore result directory with logs from tests (jkonecny)
- Disable pylint no-member error for re.MULTILINE (jkonecny)
- Fix nosetests to use newest python3 (jkonecny)
- Disable the button if iscsi is not available (#1401263) (vponcova)
- Include Python 3.6 sysconfigdata module in initramfs (#1409177) (awilliam)
- Nicer __repr__ for hubs and spokes (mkolman)
- Close the .treeinfo file after the retrieve. (vponcova)
- Fix a GTK Widget related deprecation warning (mkolman)
- Fix GTK screen/display related deprecation warnings (mkolman)
- Fix GObject and GLib deprecation warnings (mkolman)
- Fix selection of no software environment (#1400045) (vponcova)
- Use signals for Spoke & Hub entry/exit callbacks (mkolman)
- Fix the name of StorageDiscoveryConfig attribute (#1395350) (vponcova)
- Iutil PEP8 & formatting fixes (mkolman)
- Add inst.ksstrict option to show kickstart warnings as errors. (vponcova)
- Use the structured installation task classes (mkolman)
- Improved password quality checking (mkolman)
- Add unit tests for password quality checking (mkolman)
- Use Enum for password status constants (mkolman)
- Use a sane unified password checking policy (mkolman)
- Add install task processing classes and unit tests (mkolman)
- Add a signal/slot implementation (mkolman)
- Set correctly the default partitioning. (vponcova)
- rpmostreepayload: Rework binds to be recursive (walters)
- Let DNF do its own substitutions (riehecky)
- Bump Blivet version due to systemd-udev dependency (mkolman)
- Don't log "Invalid bridge option" when network has no --bridgeopts. (rvykydal)
- Fix updating of bridge slave which is bond. (rvykydal)
- Don't pass storage to firstboot.setup() (mkolman)
- RTD fixes (mkolman)
- Catch ValueError from LVM part in Blivet library (jkonecny)
- Handle unexpected storage exception from blivet (jkonecny)
- Add sudo to test requires (jkonecny)
- network: fix network --noipv4 in %%pre (rvykydal)
- fix typo in systemd service keyword (mail)
- Fix pylint issue in ks_version_test (jkonecny)
- Move Anaconda tests to mock (jkonecny)
- Add checks to git-find-branch script (jkonecny)
- Remove intermediate pot files in po-push (mkolman)
- Allow install classes to set alternate states for firstboot/initial-setup (riehecky)
- Changed the required version of BlockDev to 2.0. (vponcova)
- Remove auto generated documentation (mkolman)
- Fix generated zanata.xml from https unstable branch (jkonecny)
- Don't crash if the UIC file can't be written (#1375702) (mkolman)
- Fix calling of can_touch_runtime_system function (jkonecny)
- fix formating a bit (gitDeveloper)
- Fix zanata.xml.in in substitution variables (mkolman)
- Mock chroot environment is chosed by a git branch (jkonecny)
- Set Zanata branch from git-find-branch script (jkonecny)
- Add git-find-branch script for finding parent branch (jkonecny)
- fix pykickstart docks link (gitDeveloper)
- aarch64 now has kexec-tools (pbrobinson)
- Resolve directory ownership (mkolman)
- Fix user interaction config handling in image & directory install modes (#1379106) (mkolman)
- tui: Available help system (vponcova)
- network: index team slave connection names starting with 1 (rvykydal)
- Relax blivet dependency to >= 2.1.6-3 (awilliam)
- Bump required Blivet version (#1378156) (mkolman)
- Fix bad exception handling from blivet in iscsi (#1378156) (jkonecny)
- tui: New class for prompt (vponcova)
- iSCSI: adjust to change in blivet auth info (#1378156) (awilliam)
- Disable false positive pylint error (jkonecny)
- Add some error checking when users don't provide input for DASD devices. (sbueno+anaconda)
- Add some error checking when users don't provide input for zFCP devices. (sbueno+anaconda)
- Fix tui timezone region selection by name (vponcova)
- Fix pyanaconda tests for display mode (jkonecny)
- Fix parse-dracut to support new kickstart displaymode (jkonecny)
- Add boot option inst.noninteractive to the docs (jkonecny)
- Abort installation when Playload exc rise in a NonInteractive mode (jkonecny)
- Support non interactive mode in standalone spokes (jkonecny)
- Non-interactive mode support for Password and User spokes (jkonecny)
- Raise NonInteractive exception in Hubs event loop (jkonecny)
- Raise exception for noninteractive mode in Hub (jkonecny)
- Add new pykickstart noninteractive mode (jkonecny)
- Disable bad kickstart command on F25 (jkonecny)
- Improve DNF error message to be more understandable (jkonecny)
- tui: Add software group selection (vponcova)
- use blivet iSCSI singleton directly in storage spoke (awilliam)
- Correct deviceLinks to device_links (blivet renamed it) (awilliam)
- Instantiate the zFCP object ourselves now. (#1384532) (sbueno+anaconda)
- Fix the way DASD list is determined. (#1384532) (sbueno+anaconda)
- Add tests for payload location picking (#1328151) (jkonecny)
- Fix picking mountpoint for package download (#1328151) (jkonecny)
- Improve packaging logs without DEBUG logging (jkonecny)
- Update messiness level (mkolman)
- PEP8 and general refactoring for the main anaconda.py (mkolman)
- Move kickstart file parsing code to startup_utils (mkolman)
- Don't directly import items from anaconda_log (mkolman)
- Remove old useless code (mkolman)
- Move the rescue ui startup code to the rescue module (mkolman)
- Move set-installation-method-from-anaconda code to startup_utils
(mkolman)
- Move the live startup code to startup_utils (mkolman)
- Move code printing the startup note to startup_utils (mkolman)
- Move the pstore cleanup function to startup_utils (mkolman)
- Move the prompt_for_ssh function to startup_utils (mkolman)
- Move logging setup to startup_utils (mkolman)
- Move the geolocation startup code to a separate function (mkolman)
- Unify addons path variable name (mkolman)
- PEP 8 for startup_utils.py (mkolman)
- PEP 8 for display.py (mkolman)
- Move VNC startup checking to a separate function (mkolman)
- Move imports to the top of the file in display.py (mkolman)
- Refactor display mode handling (mkolman)
- Move display setup & startup tasks out of anaconda.py (mkolman)
- Remove main and extra Zanata pot files on master (jkonecny)
- Remove main and extra pot files before zanata push (jkonecny)
- Don't send intermediate pot files to zanata (gh#791) (awilliam)
- Improve message to be clearer in rescue.py (jkonecny)
- Add option to show password in password field (vponcova)
- Generate a list of DASDs in GUI storage spoke. (#1378338)
(sbueno+anaconda)
- Echoing 4de0ec44bdf0f68545bb55bb5fea00464b65fcab May as well include
the SL
file (riehecky)
- Fixup class name for CentOS install class (riehecky)
- Fix a typo in SAM file header (mkolman)
- Skip live image on usb when checking storage for mounted partitions
(#1369786) (rvykydal)
- Stop setting ANACONDA udev environment variable. (#1225184) (dlehman)
- Improved driver disk copying (#1269915) (mkolman)
- Fix screenshot taking logic (#1327456) (mkolman)
- Change blank lines to pep8 for Dracut DUD test (jkonecny)
- Tweak lambda use in Dracut test (jkonecny)
- Add Dracut test for reloading mod dependencies (jkonecny)
(rvykydal)
- network: don't show ibft configured devices in UI (#1309661)
(rvykydal)
- iscsi: don't generate kickstart iscsi commands for offload devices
(#1252879) (rvykydal)
- iscsi: allow installing bootloader on offload iscsi disks (qla4xxx)
(#1325134) (rvykydal)
- network: adapt to changed NM ibft plugin enablement configuration
(#1371188) (rvykydal)
- network: don't activate bond/team devices regardless of --activate
(#1358795) (rvykydal)
- Fix traceback when payload have None as url (#1371494) (jkonecny)
- Add new Dracut test and fix another ones (#1101653) (jkonecny)
- Fix bug when we add set to list (#1101653) (jkonecny)
- Add new helper script files to build system (#1101653) (jkonecny)
- Document new helper scripts to the DriverDisk README (#1101653)
(jkonecny)
- Fix driver unload is disabling network settings (#1101653) (jkonecny)
- dud: fix multiple inst.dd=http:// instances stalling in dracut
(#1268792) (rvykydal)
- network: fix ksdata generating for for non-active virtual devices
(#1321288) (rvykydal)
- network: update kickstart data also with bond bridge slaves (#1321288)
(rvykydal)
- network: add support for bridge bond slaves (#1321288) (rvykydal)
- screen_access: Ensure we write config to real sysroot (walters)
- Add release commit support to makebumpver (mkolman)
- Makefile improvements for separate release commits & tarball creation
(mkolman)
- network: add support for --no-activate kickstart opton (#1277975)
(rvykydal)
- fixup! Add base.close() after base.do_transaction (RhBug:1313240)
(jmracek)
- Add base.close() after base.do_transaction (RhBug:1313240) (jmracek)
- network: don't stumble upon new Device.Statistics NM dbus iface (#1370099) (rvykydal)
- Current Anaconda is not compatible with DNF 2.0.0 (jkonecny)
- Filter out all merge commits from the changelog (mkolman)
- Make it possible to override Zanata branch name (mkolman)
- Switch to argparse & autodetect name, version and bug email address (mkolman)
- Fix multi-inheritance (phil)
- Fix replacement of deprecated DNF method (jkonecny)
- Replace deprecated method of DNF (jmracek)
- Static checker recommended improvements (mkolman)
- Fix replacement of deprecated DNF method (jkonecny)
- Replace deprecated method of DNF (jmracek)
- Translate press-c-to-continue correctly in TUI (#1364539) (mkolman)
- Fix bootDrive driveorder fallback (#1355795) (jkonecny)
- Fix bootloader when re-using existing /boot part (#1355795) (jkonecny)
- Add support for device specification variants (#1200833) (mkolman)
- Revert "Update zanata.xml for f25-devel branch." (sbueno+anaconda)
- Update zanata.xml for f25-devel branch. (sbueno+anaconda)
- Add option to override efi_dir (phil)
- efiboot: stderr= is not an option to efibootmgr (phil)
- Fix EFI grub1 case (phil)
- Make Fedora module not so grabby (phil)
- Add centos module to pyanaconda (phil)
- network: don't require gateway for static ipv4 config in TUI (#1365532)
(rvykydal)
- Improve connection network change detection (jkonecny)
- Revert "Revalidate source only if nm-con-ed change settings (#1270354)"
(jkonecny)
- Fix anaconda-pre.service wasn't properly installed (#1255659) (jkonecny)
- Rename function for better consistency (#1259284) (rvykydal)
- Update error message for consistency (#1259284) (rvykydal)
- Add more specific username check messages also to gui (#1360334) (rvykydal)
- fix style guide test false positive on username variable (#1350375)
(rvykydal)
- tui: use functions instead of fake REs for checking values (#1350375)
(rvykydal)
- tui: get proper index of entry we are handling in input (#1331054) (rvykydal)
- tui: fix user name validity checking (#1350375) (rvykydal)
- More descriptive message on invalid username (kvalek)
- Fix another pep8 name issue (jkonecny)
- iscsi: fix getting iscsi target iface of bound target (#1359739) (rvykydal)
- Fix needsNetwork testing only additional repositories (#1358788) (jkonecny)
- Fix restart payload only when repo needs network (#1358788) (jkonecny)
- Cleanup remaining runlevel references (mkolman)
- Clarify a nosave related log message (mkolman)
- Use Screen Access Manager (mkolman)
- Add screen entry/exit callbacks (mkolman)
- Add screen access manager (mkolman)
- A simple formatting fix (mkolman)
- Fix another blivet-2.0 pep8 error (jkonecny)
- Quickfix of failing test (japokorn)
- Some docstring refactoring & typo fixes for the TUI base classes (mkolman)
- Add a file about contributing. (sbueno+anaconda)
- Store logs before anaconda starts (#1255659) (japokorn)
- DD can now replace existing drivers (#1101653) (japokorn)
- Use the F25 timezone kickstart command version (mkolman)
- Use sshd-keygen.target instead of hardcoded sshd-keygen script (jjelen)
- Make it possible to disable sshd service from running. (#1262707)
(sbueno+anaconda)
- Change bootloader boot drive fallback (jkonecny)
- Fix of Python3x uncompatible commands (japokorn)
- Add NTP server configuration to the TUI (#1269399) (mkolman)
- Move the NTP server checking constants to constants.py (mkolman)
- Use a constant for the NTP check thread name prefix (mkolman)
- Fix another victim of the python 2->3 conversion. (#1354020) (dshea)
- Attempt to unload modules updated by a driver disk (dshea)
- Fix the processing of device nodes as driver disks (dshea)
- Stop kickstart when space check fails (bcl)
- Service anaconda-nm-config is missing type oneshot (jkonecny)
- Fix dhcpclass to work both via kickstart and the boot cmdline. (clumens)
- network: handle also ifcfg files of not activated virtual devices (#1313173)
(rvykydal)
- network: check onboot value in ksdata, not NM connections (#1313173)
(rvykydal)
- network: do not activate device on kickstart --onboot="yes" (#1341636)
(rvykydal)
(#1290858) (rvykydal)
- hostname: add tooltip to Apply button (#1290858) (rvykydal)
- hostname: fix accelerator collision (#1290858) (rvykydal)
- hostname: don't set hostname in initrafms of target system (#1290858)
(rvykydal)
- hostname: set current hostname from target system hostname on demand
(#1290858) (rvykydal)
- hostname: suggest current hostname for storage containers (#1290858)
(rvykydal)
- hostname: don't set target system static hostname to current hostname
(#1290858) (rvykydal)
- network tui: do not activate device when setting its onboot value (#1261864)
(rvykydal)
- network tui: edit persistent configuration, not active connection (#1261864)
(rvykydal)
- network: validate netmask in tui (#1331054) (rvykydal)
- Add wordwrap to text mode and use it by default (#1267881) (rvykydal)
- Fix adding new VG in Custom spoke can't be applied (#1263715) (jkonecny)
- Fix SimpleConfigFile file permissions (#1346364) (bcl)
- Re-configure proxy when updateBaseRepo is called (#1332472) (bcl)
- Change where to look for the iscsi object (#1344131) (dshea)
- Fix old blivet identifiers (#1343907) (dshea)
- Fix a covscan warning about fetch-driver-net (#1269915) (bcl)
- Fix crash when NM get_setting* methods return None (#1273497) (jkonecny)
- Overwrite network files when using ks liveimg (#1342639) (bcl)
- Stop using undocumented DNF logging API (bcl)
- Use the LUKS device for encrypted swap on RAID (dshea)
- Keep the subdir in driver disk update paths (dshea)
- Warn about broken keyboard layout switching in VNC (#1274228) (jkonecny)
- Make the anaconda-generator exit early outside of the installation
environment (#1289179) (mkolman)
- Only try to restart payload in the Anaconda environment (mkolman)
- Make current runtime environment identifiers available via flags (mkolman)
- Display storage errors that cause no disks to be selected (#1340240) (bcl)
- Fix the SourceSwitchHandler pylint errors differently. (clumens)
- Fix pylint errors. (clumens)
- Update the disk summary on Ctrl-A (dshea)
- Revert "Refresh the view of on-disk storage state every 30 seconds."
(dlehman)
- Refresh the view of on-disk storage state every 30 seconds. (dlehman)
- Handle unsupported disklabels. (dlehman)
- Use a blivet method to remove everything from a device. (dlehman)
- Tighten up ResizeDialog._recursive_remove a bit. (dlehman)
- Only look for partitions on partitioned disks. (dlehman)
- NFS DDs installation now works correctly (#1269915) (japokorn)
- Remove unused on_proxy_ok_clicked from Source spoke (jkonecny)
- send all layouts to localed for keymap conversion (#1333998) (awilliam)
- Small cleanup (mkolman)
- network: don't crash on devices with zero MAC address (#1334632) (rvykydal)
- Remove Authors lines from the tops of all files. (clumens)
- Related: rhbz#1298444 (rvykydal)
- New Anaconda documentation - 25.14 (bcl)
- Catch DNF MarkingError during group installation (#1337731) (bcl)
- Fix TUI ErrorDialog processing (#1337427) (bcl)
- Clean up yelp processes (#1282432) (dshea)
- Remove the locale list from zanata.xml (dshea)
- Ditch autopoint. (dshea)
- Ditch intltool. (dshea)
- Rename fedora-welcome to fedora-welcome.js (dshea)
- Fix UEFI installation after EFIBase refactor (bcl)
- Fix error handling for s390 bootloader errors (sbueno+anaconda)
- Deselect all addons correctly (#1333505) (bcl)
- gui-testing needs isys to be compiled. (clumens)
- Add more to the selinux check in tests/gui/base.py. (clumens)
- Move default X keyboard setting out of the Welcome spoke (mkolman)
- Rerun writeBootLoader on Live BTRFS installs (bcl)
- Check for mounted partitions as part of sanity_check (#1330820) (bcl)
- Merge pull request #620 from dashea/new-canary (dshea)
- Update the required pykickstart version. (dshea)
- Implement %packages --excludeWeakdeps (#1331100) (james)
- Fix bad addon handling when addon import failed (jkonecny)
- Add retry when downloading .treeinfo (#1292613) (jkonecny)
- Return xprogressive delay back (jkonecny)
- Change where tests on translated strings are run. (dshea)
- Merge the latest from translation-canary (dshea)
- Squashed 'translation-canary/' changes from 5a45c19..3bc2ad6 (dshea)
- Add new Makefile target for gui tests (atodorov)
- Define missing srcdir in run_gui_tests.sh and enable coverage (atodorov)
- Split gui test running out into its own script. (clumens)
- Look higher for the combobox associated with an entry (#1333530) (dshea)
- Use createrepo_c in the ci target. (dshea)
- Compile glib schema overrides with --strict. (dshea)
- Don't crash when taking a screenshot on the hub (#1327456) (mkolman)
- Fix pylint errors. (phil)
- Factor out common grub1/grub2 stuff into mixin, and other factoring (phil)
- Add GRUB1 (legacy) support back to Anaconda (phil)
- ostree: Use bind mounts to setup ostree root (bcl)
- ostree: Skip root= setup when using --dirinstall (bcl)
- disable_service: Specify string format args as logging params. (clumens)
- Ignore failure when disable services that do not exist (phil)
- Get rid of an unused variable in the network spoke. (clumens)
- Revalidate source only if nm-con-ed change settings (#1270354) (jkonecny)
- Merge solutions for test source when network change (#1270354) (jkonecny)
- Changes in network state revalidate sources rhbz#1270354 (riehecky)
- Add methods to enable and disable systemd services. (dshea)
- Do not add .service to the end of service names. (dshea)
- Remove detach-client from tmux.conf (dshea)
- Use Blivet 2.0 for set_default_fstype (#607) (sgallagh)
- Remove dnf from the list of required packages. (#605) (dshea)
- Add access to the payload from addons (#1288636) (jkonecny)
- Disable pylint warnings related to the log handler fixer. (dshea)
- Allow the metacity config dir to be overriden. (dshea)
- Do not include /usr/share/anaconda files in the gui package. (dshea)
- Work around logging's crummy lock behavior. (dshea)
- Use rm -r to remove the temporary python site directory. (dshea)
- Remove the subnet label for wired devices. (#1327615) (dshea)
- Fix how unusued network labels are hidden (#1327615) (dshea)
- Remove yum_logger (bcl)
- Remove the lock loglevel (bcl)
- Use a temporary user-site directory for the tests. (dshea)
- Build everything for make ci. (dshea)
- Ignore some E1101 no-member errors when running pylint (bcl)
- Sprinkle the code with pylint no-member disable statements (bcl)
- Catch GLib.GError instead of Exception (bcl)
- Update storage test for Blivet 2.0 API change. (bcl)
- Initialize missing private methods in BasePage class (bcl)
- Update kickstart.py for Blivet 2.0 API change. (bcl)
- Use namedtuple correctly in kexec.py (bcl)
- Add more requires to make password checking still work. (#1327411) (dshea)
- Rename isS390 to match the renames in blivet. (dshea)
- Suppress signal handling when setting zone from location (#1322648) (dshea)
- Refresh metadata when updates checkbox changes (#1211907) (bcl)
- Change new_tmpfs to new_tmp_fs. (clumens)
- Add support for kickstart %onerror scripts. (clumens)
- Show network spoke in the TUI reconfig mode (#1302165) (mkolman)
- network: copy static routes configured in installer to system (#1255801)
(rvykydal)
- network: fix vlan over bond in kickstart (#1234849) (rvykydal)
- network: use NAME to find ifcfg on s390 with net.ifnames=0 (#1249750)
(rvykydal)
- Get rid of the reimport of MultipathDevice. (clumens)
- Fix iSCSI kickstart options aren't generated (#1252879) (jkonecny)
- Fix adding offload iSCSI devices (vtrefny)
- Make the list-harddrives script mode robust (mkolman)
- Don't use booleans in Requires (#1323314) (dshea)
- Set CSS names on all of the anaconda classes. (#1322036) (dshea)
- Don't crash if no groups are specified (#1316816) (dshea)
- Fix only one address is shown in anaconda (#1264400) (jkonecny)
- Fix call to update optical media format. (#1322943) (dlehman)
- Reset invalid disk selection before proceeding. (dlehman)
- Multiple Dogtail tests improvements (atodorov)
- Do not allow liveinst with --image or --dirinstall (#1276349) (dshea)
- New Anaconda documentation - 25.5 (bcl)
- Revert "Change the default locale to C.UTF-8 (#1312607)" (#1315494) (dshea)
- Make windows in metacity closable (#1319590) (dshea)
- Fix the use of CSS psuedo-classes in the widgets. (dshea)
- Add reason when logging invalid repository (#1240379) (jkonecny)
- Add a function to apply a PangoAttrLanguage to a label. (dshea)
- Add functions to watch changes to a container widget. (dshea)
- Switch to the adwaita icon theme. (dshea)
- Fix duplicate network settings in dracut (#1293539) (jkonecny)
- Fix create device with bad name when parsing KS (#1293539) (jkonecny)
- Use a lock for repoStore access (#1315414) (bcl)
- Add missing inst prefix to the nokill option in docs (mkolman)
- Merge pull request #551 from wgwoods/master-multiple-initrd-dd-fix (wwoods)
- fix multiple inst.dd=<path> args (rhbz#1268792) (wwoods)
- Use an icon that exists in Adwaita for the dasd confirmation (dshea)
- Make it possible to skip saving of kickstarts and logs (#1285519) (mkolman)
- Add a function for empty file creation (#1285519) (mkolman)
- Run actions for argparse arguments (#1285519) (mkolman)
- except block in py3.5 undefines the variable (bcl)
- Remove some history from the liveinst setup. (dshea)
- Do not run the liveinst setup if not in a live environment. (dshea)
- Set GDK_BACKEND=x11 before running anaconda from liveinst. (dshea)
- Run zz-liveinst as an autostart application (dshea)
- Translate the help button. (dshea)
- Translate the required space labes in resize.py (dshea)
- Unify displayed columns in custom spoke dialogs. (#1289577) (sbueno+anaconda)
- Show some confirmation to users if adding a DASD was successful. (#1259016)
(sbueno+anaconda)
- Hotfix for missing storage in payload class (#1271657) (jkonecny)
- Check to see if DD repo is already in addOn list (#1268357) (bcl)
- Use the default levelbar offset values. (dshea)
- Do not change the GUI language to a missing locale. (#1312607) (dshea)
- Don't crash when setting an unavailable locale (#1312607) (dshea)
- Change the default locale to C.UTF-8 (#1312607) (dshea)
- Update the libtool version-info. (dshea)
- Use CSS to style the internal widgets. (dshea)
- Move the widgets pixmaps into resources. (dshea)
- Add a resource bundle to libAnacondaWidgets (dshea)
- Rename show_arrow and chosen_changed to show-arrow and chosen-changed (dshea)
- Remove an invalid transfer notation. (dshea)
- Stop using SGML in the docs. (dshea)
- Change the install test URL. (dshea)
- Fix nfs source crash when options change (#1264071) (bcl)
- makebumpver: Add a --dry-run option (bcl)
- NTP should have better behavior (#1309396) (jkonecny)
- Manually set clock shifts on UI idle (#1251044) (rmarshall)
- Don't remove selected shared part when Delete all (#1183880) (jkonecny)
- Don't delete shared/boot parts in deleteAll (#1183880) (jkonecny)
- Fix gui tests for anaconda move to anaconda.py (atodorov)
- Use a different ipmi command to log events. (clumens)
- Clarify that a string in list-screens is actually a regex. (clumens)
- Merge pull request #513 from wgwoods/update-dd-docs (wwoods)
- updated driver updates docs (wwoods)
- Add specification for the user interaction config file (mkolman)
- Update zanata webui URL in translation doc. (dlehman)
- Tweak partition removal in Custom spoke (jkonecny)
- Do not skip evaluation after removing partitions (jkonecny)
- Import iutil earlier so we can use ipmi_report from check_for_ssh. (clumens)
- Make disconnect_client_callbacks more resilient (#1307063). (clumens)
- Move the langpacks install into to a separate function. (dshea)
- Fix _find_by_title method in Accordion (jkonecny)
- Log payloadError so we know why installation failed. (bcl)
- Add the addons directory to the rpm. (dshea)
- Use the packaged version of ordered-set (dshea)
- Remove an unused import (dshea)
- Add an uninstall hook for the renamed anaconda (dshea)
- Make langpack work in DNF (#1297823) (jsilhan)
- New Anaconda documentation - 24.11 (bcl)
- Rename ./anaconda to ./anaconda.py to work around coverage.py #425 (atodorov)
- Remove special handling for interruptible system calls. (dshea)
- Handle PEP 3101 strings in the gettext context check (dshea)
- Improve RHS summary strings in multiselection (#1265620) (jkonecny)
- Increase GI version required of AnacondaWidgets (jkonecny)
- Increment version of g-introspection for widgets (jkonecny)
- Increment the AnacondaWidgets version (jkonecny)
- Switch to the new Initial Setup unit name (#1299210) (mkolman)
- Uncomment self.check_lang_locale_views in tests/gui/ (atodorov)
- Add dogtail to test requirements (atodorov)
- Add config for easier combining of kickstart and Jenkins coverage data
(atodorov)
- Apply the fallback style to anaconda selectors. (dshea)
- Redo the stylesheet for Gtk 3.19+ (dshea)
- Directly overwrite /usr/share/anaconda/anaconda-gtk.css (dshea)
- Merge pull request #463 from dashea/translation-tests (dshea)
- Display the name of the addon while executing it (bcl)
- Add page selection summary to the right side (#1265620) (jkonecny)
- Ask when removing new items in multiselection (#1265620) (jkonecny)
- Add multiselection with SHIFT key (#1265620) (jkonecny)
- Use show_arrow feature implemented in Selector (#1265620) (jkonecny)
- Add new property to show/hide arrow in Selector (#1265620) (jkonecny)
- Change selection logic when opening Page (#1265620) (jkonecny)
- Add new BasePage class (#1265620) (jkonecny)
- Add signal and methods to MountpointSelector (#1265620) (jkonecny)
- Fix errors with multiselection (#1265620) (jkonecny)
- Accordion class now process events for selectors (#1265620) (jkonecny)
- Change cammel case for accordion.py to new pep8 (jkonecny)
- Move selection logic from custom spoke to accordion (#1265620) (jkonecny)
- Modify ConfirmDeleteDialog now the checkbox is optional (#1265620) (jkonecny)
- Multiselection works in GUI with remove (#1265620) (jkonecny)
- Add multiselection to Accordion with control key (#1265620) (jkonecny)
- Remove bad translations from the source tarball. (dshea)
- Treat warnings from xgettext as errors. (dshea)
- Run translation-canary tests from make check. (dshea)
- Do not run pylint on translation-canary (dshea)
- Squashed 'translation-canary/' content from commit 5a45c19 (dshea)
- Handle DeviceConfiguration with con = None (#1300499) (bcl)
- Log detailed information about installed packages (bcl)
- s/KickstartValueError/KickstartParseError. (clumens)
- Move requiredDeviceSize to the main Payload class (#1297905) (dshea)
- Fix bad space needed messages (jkonecny)
- nosetests-3.5 is now the right version. (clumens)
- Ignore a pylint error about how we're using Popen (dshea)
- Mark an unused variable as unused (dshea)
- Ignore type-related errors for types pylint can't figure out (dshea)
- Import errors are just regular errors now (dshea)
- Replace the remaining log.warn calls with log.warning. (dshea)
- Fix an erroneously bare raise statement (dshea)
- Replace the deprecated assertEquals with assertEqual (dshea)
- Don't add a None to the list of things to unmount on ostree installs.
(clumens)
- Merge 9c5e02392d0401a3bd0adecedea03535595773ef into
67b569253c724639c2490f5fab70f7111f699b3f (atodorov)
- Fix the replacement suggestion for "hostname" (dshea)
- Automatically generate sr (dshea)
- Fix PropertyNotFoundError PermHwAddress (#1269298) (jkonecny)
- Make sure python3.5 code can run in early initrd (bcl)
- Replace <list>.delete() with <list>.remove() in user.py (sujithpandel)
- Rename everything that still refers to LiveCD (atodorov)
- Updates to progress and storage tests (atodorov)
- Multiple changes to DogtailTestCase (atodorov)
- Move all Python files into the main gui/ directory (atodorov)
- Simplify tests by removing OutsideMixin and update Creator (atodorov)
- Modify existing tests to match latest anaconda behavior and environment
(atodorov)
- Temporary disable test code which doesn't work (atodorov)
- Make tests/gui/ execute ./anaconda from git (atodorov)
- Add window title (#1280077) (mkolman)
- Replace execReadlines with check_output in parse-kickstart_test.py (bcl)
- Fix a spelling error in the hardware error message (#1284165). (clumens)
- Fix parse-kickstart_test.py. (clumens)
- Remove mkdud.py. (clumens)
- Remove the kickstart_tests directory. (clumens)
- Always quote values in ifcfg- files (#1279131) (bcl)
- Include original kickstart in /root/original-ks.cfg (#1227939) (bcl)
- strip spaces from extlinux label and default (#1185624) (bcl)
- Report kernel failures during kickstart tests. (clumens)
- Make sure unicode in kickstart works. (dshea)
- Set the window icon (dshea)
- Only run space check in TUI if spokes are complete. (#1279413)
(sbueno+anaconda)
- Allow a user's primary group to be created in --groups (#1279041) (dshea)
- Remove uses of broad-except. (dshea)
- Add a test for all that container minimization stuff. (clumens)
- Use the partition command in one of the kickstart_tests. (clumens)
- Don't clear the _currentIsoFile if another iso was selected (bcl)
- makeupdates: Include utils/handle-sshpw (bcl)
- Add --sshkey to kickstart sshpw command (#1274104) (bcl)
- Split exception description from exception traceback (jkonecny)
- Show DNF exception instead of silent exit (jkonecny)
- Combine results from all gettext_tests into one log file (atodorov)
- Try to run make ci with real translations. (dshea)
- Untranslate undisplayed TreeView column headers. (dshea)
- Add a test for hidden translatable strings (dshea)
- Add the translated string to markup error messages. (dshea)
- Test glade translations by default (dshea)
- Change the way glade tests are run. (dshea)
- Remove the accelerator test. (dshea)
- Add the test lib directory to $PYTHONPATH in the commit hook (dshea)
- network: create ifcfg files in tui if needed (#1268155) (rvykydal)
- Do not limit ONBOOT default setting to url and nfs installation methods
(#1269264) (rvykydal)
- ibft: fix setting dracut boot args for static ibft nic configuration
(#1267526) (rvykydal)
- network: Don't set --device link default for hostname only network cmd
(#1272274) (rvykydal)
- network: assume --device=link as default also for ks on hd (#1085310)
(rvykydal)
- network: use ibftx interface for iSCSI from iBFT in dracut (#1077291)
(rvykydal)
- network: add s390 options to default ifcfg files (#1074570) (rvykydal)
- Honor ANACONDA_WIDGETS_OVERRIDES (atodorov)
- Load anaconda-gtk.css from ANACONDA_DATA if specified (atodorov)
- Use the correct path for ui categories (atodorov)
- Typo fix, it's ANACONDA_WIDGETS_DATA not ANACONDA_WIDGETS_DATADIR (atodorov)
- Allow wired network properties more grid space. (dshea)
- Improve language selection at low resolutions. (dshea)
- Make reclaim work with small screens and big labels (dshea)
- allow repo with only a name if it's a pre-defined one (#1277638) (awilliam)
- Only raise thread exceptions once (#1276579) (bcl)
- Use py3.4 crypt and salt (bcl)
- Be more careful with incomplete device types (#1256582) (dshea)
- Fix an import error in rpmostreepayload.py. (clumens)
- Fix Testing docs inclusion in Sphinx (bcl)
- Ignore interfaces with invalid VLAN IDs. (dshea)
- Cleaner logging of .treeinfo return conditions in dependant function.
(riehecky)
- Update link to upstream kickstart docs (opensource)
- rpmostreepayload: Also unmount internal mounts during shutdown (walters)
- rpmostreepayload: Fix two issues with mounting (walters)
- Add a README for kickstart tests. (clumens)
- Make the documentation match the environment variable. (clumens)
- Check that cache PVs (if any) are in the VG the LV belongs to (#1263258)
(vpodzime)
- Fix the alignment of the "Label" label in custom (dshea)
- Use unsafe caching during kickstart tests. (clumens)
- Update the on-disk snapshot of storage when adv. disks are added (#1267944)
(vpodzime)
- Check that ipv6 kickstart outputs the right ip= (dshea)
- Change a variable name for pylint. (dshea)
- Do not run time_initialize for image and directory installations (#1274103)
(bcl)
- Remove unused properties (dshea)
- Do not modify the kickstart user data until apply() (dshea)
- Make AdvancedUserDialog.run() more readable (dshea)
- Improve the behavior of the home directory input. (dshea)
- Stop setting inappropriate properties in ksdata. (dshea)
- Update the password strength bar during the password strength check. (dshea)
- Remove unnecessary grab_focus and set_sensitive calls (dshea)
- Use signal handlers in the user spoke more sensibly. (dshea)
- Fix potential issues with the username guesser. (dshea)
- Make kickstart tests growing LVs stricter (vpodzime)
- Point coverage.py to the full path of pyanaconda/ (atodorov)
- Don't set BOOTPROTO= when it isn't set (jbacik)
- Pass strings to blockdev.dasd_format, not a DASDDevice object. (#1273553)
(sbueno+anaconda)
- Revert "Use yum to install the mock buildroot for now." (dshea)
- decode package name for /etc/sysconfig/kernel (RHBZ #1261569) (awilliam)
- Add tests for the more complicated command line options (dshea)
- Store fewer kinds of things in the dirinstall option. (dshea)
- Fix the parsing of selinux=0 (#1258569) (dshea)
- Include a local $ANACONDA_DATADIR in the test environment. (dshea)
- Move the command line arguments to anaconda_argparse. (dshea)
- Don't crash while logging binary output. (dshea)
- Decode program output even if there is no output (#1273145) (dshea)
- Add a test for _run_program with binary output (dshea)
- Test execWithCapture when the command outputs nothing. (dshea)
- Fix a long line in kickstart_tests/functions.sh. (clumens)
- Merge pull request #414 from vpodzime/master-lvm_log (vpodzime)
- Save the lvm.log Blivet may produce (vpodzime)
- Use GtkResponseType values in the iso chooser dialog (dshea)
- Do not use deprecated getDevicesByInstance method (vtrefny)
- By default, skip those kickstart tests we know to be failing. (clumens)
- Fix pylint unused import (jkonecny)
- network: handle bridge device appearing before its connection (#1265593)
(rvykydal)
- Use $KSTEST_URL in tests that still had dl.fp.o hardcoded. (dshea)
- Support CONNECT in the test proxy server. (dshea)
- Extract the file used by liveimg as a prereq (dshea)
- Convert the proxy script to a prereq. (dshea)
- Add a prereqs function to kickstart tests. (dshea)
- Fix traceback when trying to create list of unformatted DASDs. (#1268764)
(sbueno+anaconda)
- network: handle missing connections of a device configured in GUI better
(rvykydal)
- network: don't set NM_CONTROLLED=no for root on SAN. (rvykydal)
- Add support for other systemd units to kickstart service command (bcl)
- Merge pull request #388 from wgwoods/dd-in-initrd-fix (wwoods)
- Set the password checkbox for empty kickstart passwords. (dshea)
- Do not set the password input text with unencrypted passwords. (dshea)
- Install input checks before modifying the user GUI (#1256065) (dshea)
- Fix a lying error message in style_guide.py (dshea)
- Use "Enter" instead of "Return" for the keyboard key. (dshea)
- New Anaconda documentation - 24.3 (bcl)
- Include missing test files and scripts in Makefile.am/tarball (atodorov)
- dracut: accept inst.dd=[file:]/dd.iso (#1268792) (wwoods)
- Do not override StorageChecker.errors in StorageSpoke (#1252596) (vtrefny)
- Lookup IPv6 address without brackets (#1267872) (bcl)
- Mangle the boot device differently for systemd (#1241704) (dshea)
- Fail the media check if the systemd service failed to start. (dshea)
- Check minimal memory requirements properly (#1267673) (jstodola)
- Allow users to be created with an existing GID. (dshea)
- Add a test for creating a user with an existing GID. (dshea)
- Add tests for gids embmedded in the user groups list. (dshea)
- Allow the kickstart --groups list to specify GIDs. (dshea)
- Add a --groups argument to the user ks test. (dshea)
- Fix the locale pattern packages-instlangs-3 looks for. (dshea)
- Raise an error if osimg cannot be found (#1248673) (bcl)
- Use the bootloader raid levels for bootloader installation (#1266898) (bcl)
- Use otps.display_mode during early startup (#1267140) (mkolman)
- Mount stage2 cdrom after running driver-updates (#1266478) (bcl)
- Get rid of an unused import in the user spoke. (clumens)
- Log crashes from the signal handler. (dshea)
- Save a core file when anaconda crashes. (dshea)
- Keep environment selection when reentering the software spoke (#1261393)
(mkolman)
- Only show the user spoke if no users are specified in kickstart (#1253672)
(mkolman)
- Fix 'cat: /tmp/dd_disk: No such file or directory' (#1251394) (jkonecny)
- Do not display curl 404 errors that can be safely ignored (vtrefny)
- Catch blkid failure in driver-updates (#1262963) (bcl)
- Add kickstart tests for %packages --instLangs (dshea)
- Do not display markup in showDetailedError. (dshea)
- Skip OEMDRV if interactive DD is requested (#1254270) (bcl)
- Drivers are simply under /run/install/DD-x/ (#1254270) (bcl)
- Fix branding when iso is downloaded from nfs or hd (#1252756) (jkonecny)
- Use yum to install the mock buildroot for now. (dshea)
- Rename the gettext tests (dshea)
- Bring back the KSTEST_HTTP_ADDON_REPO substitution in nfs-repo-and-addon.sh
(clumens)
- Run substitution checks on the right kickstart file. (clumens)
- Tell gettext that anaconda is not a GNU package. (dshea)
- Ignore environment modification warnings in docs/conf.py (dshea)
- Check for unsubstituted strings before running a test. (dshea)
- Autopart use 90% of disk capacity for required space compare (#1224048)
(jkonecny)
- Fix include packages install size when downloading on root (#1224048)
(jkonecny)
- Enable and improve the check for swap LV size in LVM cache kickstart tests
(vpodzime)
- make-sphinx-docs: Add modules needed to document tests (bcl)
- Add test documentation (atodorov)
- Fix how the reqpart test checks for /boot, again. (clumens)
- Add a way to get default settings when running the kickstart_tests. (clumens)
- Change how we ignore non-tests in kickstart_tests. (clumens)
- Various fixes to substitution strings in kickstart_tests. (clumens)
- Move kickstart_test .ks files to .ks.in. (clumens)
- Fix the types passed to chown_dir_tree (#1260318) (dshea)
- Add a test for home directory reuse (dshea)
- Use MDRaidArrayDevice.members instead of .devices (dshea)
- Make sure anaconda reads in ks file from OEMDRV device. (#1057271)
(sbueno+anaconda)
- Try to deal with expected errors from devicetree.populate (#1257648)
(vpodzime)
- Revert "Temporarily disable generating a coverage report." (clumens)
- Fix a DBus InvalidProperty handling (jkonecny)
- Fix another bash syntax problem in kickstart-genrules.sh (#1057271)
(sbueno+anaconda)
- Add a test for the rootpw kickstart command (dshea)
- Add tests for setRootPassword (dshea)
- Add a /boot partition to the reqpart test. (clumens)
- Fix up a statement that's not assigned to anything. (clumens)
- Temporarily disable generating a coverage report. (clumens)
- Don't try to concatenate a list with a string (#1252444) (mkolman)
- Activate coverage for tests executed with sudo (atodorov)
- set sysroot correctly when setting root password (#1260875) (awilliam)
- Add a test for kickstarts that %include a URL (dshea)
- Add missing python dependencies for requests. (#1259506) (dshea)
- Serve the http addon repos from the test tmpdir (dshea)
- Make make-addon-pkgs easier to use from within a test (dshea)
- Add a simple http server for use in kickstart tests. (dshea)
- Add a script to print an IP address for the host. (dshea)
- Add a cleanup hook that can be defined by kickstart tests (dshea)
- Move kickstart test support files into a separate directory. (dshea)
- Fix a python3 related error in the pre-commit hook (dshea)
- network: gui spoke TODO cleanup (rvykydal)
- libnm in spoke: add missing connection for eth device with Configure
(rvykydal)
- libnm in spoke: allow adding missing connection for eth device externally
(rvykydal)
- libnm in spoke: wait for valid state of added device before adding to list
(rvykydal)
- libnm in spoke: use libmn objects instead of names an uuids (device on/off)
(rvykydal)
- libnm in spoke: to check if device is activated just use its object
(rvykydal)
- libnm in spoke: use connnection objects instead of uuids (edit connection)
(rvykydal)
- libnm in spoke: refresh early when device is added (rvykydal)
- libnm in spoke: use connection object instead of uuid (DeviceConfiguration)
(rvykydal)
- libnm in spoke: share nm client in standalone and normal spoke (rvykydal)
- libnm in spoke: add enterprise wpa connection using libnm client (rvykydal)
- libnm in spoke: use AccessPoint object in place of ssid bytearray (rvykydal)
- libnm in spoke: delete connection using libnm client (rvykydal)
- libnm in spoke: replace python-dbus workaround calls for ap security flags
(rvykydal)
- libnm in spoke: call get_data() on ap.get_ssid() result to get ssid bytes
(rvykydal)
- libnm in spoke: showing ip configuration of a device (rvykydal)
- libnm in spoke: NMClient -> NM.Client (rvykydal)
- libnm in spoke: gi.NetworkManager -> gi.NM (rvykydal)
- libnm in spoke: Revert "Fix crash when new device appear in Welcome screen
(#1245960)" (rvykydal)
- libnm in spoke: Revert "Fix crash when connections are changing (#1245960)"
(rvykydal)
- Add an ignoredisk --drives= test. (clumens)
- Add a test for the reqpart command. (clumens)
- Grab anaconda.coverage on tests that reimplement validate(). (clumens)
- Install driver-updates (dshea)
- Fix a typo in service enablement in kickstart.py. (clumens)
- Get rid of the extraneous cats and greps in user.ks. (clumens)
- Add sshkey testing to the user kickstart_test. (clumens)
- Add a kickstart test in Arabic. (clumens)
- Verify Initial Setup services are present before turning them ON/OFF
(#1252444) (mkolman)
- Don't crash if the Japanese PC-98 keyboard is selected (#1190589) (mkolman)
- Report on all local files and exclude what we don't need instead of
explicitly including paths we may not be aware of. (atodorov)
- Change "failed to download" messages from critical to warning. (clumens)
- getcode -> status_code in a live payload error message. (clumens)
- Fix a bash error in kickstart-genrules.sh (#1057271) (sbueno+anaconda)
- specify if=virtio,cache=none for VM drives (atodorov)
- update the test b/c latest anaconda doesn't allow weak passwords (atodorov)
- Specify format=raw to avoid warning from qemu (atodorov)
- update for Python3 nose (atodorov)
- Add a services.sh file to match the existing services.ks. (clumens)
- Add types to all existing kickstart tests. (clumens)
- Add the ability to mark kickstart tests with a type. (clumens)
- Run nm-connection-editor with the --keep-above flag (#1231856) (mkolman)
- Get rid of libuser. (#1255066) (dshea)
- s/$releasever/rawhide/ (clumens)
- LVM on RAID kickstart test (vpodzime)
- unbuffered read in python3 only works for binary (bcl)
- don't crash if no environment set in interactive (#1257036) (awilliam)
- network: compare with ssid bytes, not str (rvykydal)
- Add dependencies for running the tests/gui tests (atodorov)
- Fix first run environment setup in software spoke (#1257036) (jkonecny)
- Stop pretending liveinst+rescue is supported (#1256061). (clumens)
- Defer to Fedora distro-wide settings for password strength (#1250746) (dshea)
- New Anaconda documentation - 24.0 (bcl)
- Do a better job reporting failures from kickstart_tests. (clumens)
- Preserve coverage results from running the kickstart_tests. (clumens)
- Fix a race between a window continuing and the next starting (#1004477) (dshea)
- Start hubs with the buttons insensitive. (dshea)
- Do not replace the standard streams if not necessary. (dshea)
- Fix inst.repo=hd: is not working (#1252902) (jkonecny)
- Kickstart: Added SELinux test. (kvalek)
- Kickstart tests related to SELinux. (kvalek)
- Package install and debug message logging. (kvalek)
- Don't crash if incorrect environment is set in kickstart (#1234890) (mkolman)
- Fix I/O issues when anaconda is started without a locale. (dshea)
- Move locale environment logic into localization.py (dshea)
- network: fix configuring team in kickstart pre (#1254929) (rvykydal)
- Merge pull request #311 from atodorov/add_local_coverage (clumens)
- Merge pull request #308 from atodorov/rawhide_missing_deps (clumens)
- Enable test coverage in CI (atodorov)
- Fix the single-spoke TUI message for Python 3. (dshea)
- Merge pull request #291 from atodorov/update_coverage_switch (clumens)
- Add missing requirements (atodorov)
- Add basic kickstart tests for LVM Thin Provisioning (vpodzime)
- Use the default mirrorlist instead of fixed repo URL in kickstart tests (vpodzime)
- Destroy the keyboard layout dialog when finished (#1254150) (dshea)
- Do not encode the geoloc timezone to bytes (#1240812) (dshea)
- use inst.debug as alternative option to start coverage (atodorov)
- Don't set net.device to link if there is no ksdevice (#1085310) (bcl)
- Reading carrier while link is down raises IOError (#1085310) (bcl)
- Don't write nfs repos to the target system (#1246212) (bcl)
- Make sure username entered in TUI if create a user chosen. (#1249660)
(sbueno+anaconda)
- Write the empty dnf langpacks.conf to the right directory (#1253469) (dshea)
- Add pyanaconda test for network.check_ip_address (jkonecny)
- Replace IPy package by ipaddress (jkonecny)
- Correctly check return code when running rpm from makeupdates (mkolman)
- Fix crash when new device appear in Welcome screen (#1245960) (jkonecny)
- Fix crash when connections are changing (#1245960) (jkonecny)
- Make LVM cache kickstart tests more robust (vpodzime)
- product.img buildstamp should override distribution buildstamp (#1240238)
(bcl)
- On incomplete ks, don't automatically proceed with install. (#1034282)
(sbueno+anaconda)
- Update the translation doc with zanata branching incantations.
(sbueno+anaconda)
- Merge pull request #287 from kparal/patch-1 (clumens)
- boot-options.rst: add a note about nfsiso (kamil.paral)
- Few fixes and amendments for the boot_options.rst file (vpodzime)
- Prevent issues with encrypted LVs on renamed VGs (#1224045) (vpodzime)
- Create and use snapshot of on-disk storage with no modifications (#1166598)
(vpodzime)
- Implement the class for storage snapshots (vpodzime)
- Prevent any changes in the StorageSpoke if just going back (vpodzime)
- Make StorageSpoke's on_back_clicked less complicated (vpodzime)
- Add kickstart tests for the LVM cache kickstart support (vpodzime)
- Disable packages-multilib, for now. (clumens)
- Make sure the liveimg test shuts down when it finishes. (clumens)
- Change how success is checked for the basic-ostree test. (clumens)
- Use labels for the rest of the non-autopart test results. (dshea)
- Use a disk label to find the filesystem for escrow results (dshea)
- Use someone else's code for PID file management. (dshea)
- Prevent incomplete translations from making the TUI unusable (#1235617)
(mkolman)
- Apply the environment substitutions more liberally in nfs-repo-and-addon
(dshea)
- Use stage2=hd: instead of stage2=live: (dshea)
- Add test for liveimg kickstart command (bcl)
- Fix pre-install script execution (bcl)
- test pre-install kickstart section (bcl)
- Use sys.exit() instead of the exit() created by site.py. (dshea)
- Call ipmi_report before sys.exit (dshea)
- Add a test for proxy authentication (dshea)
- Add optional authentication to the proxy server (dshea)
- Add more tests to proxy-kickstart (dshea)
- Show an alternative prompt if a hub contains only a single spoke (#1199234)
(mkolman)
- Add few docs and improvement in check_ip_address (jkonecny)
- Check whether files actually contain translatable strings. (dshea)
- Add specific error string to TUI user dialog (#1248421) (bcl)
- Make EditTUIDialog error generic (#1248421) (bcl)
- Fix and expand nfs-repo-and-addon.ks (dshea)
- Added a script to make the packages used by nfs-repo-and-addon (dshea)
- Implement the rest of the repo options in dnfpayload. (dshea)
- Fix kickstart test for bond interface creation (jkonecny)
- Use python3 for the proxy server and remove python2 compatibility (dshea)
- makePickle now needs to return bytes (bcl)
- gi.require_version raises ValueError (bcl)
- Remove duplicate signal setup block (bcl)
- Fix three bugs discovered by driverdisk-disk.ks (clumens)
- Fix error with OEMDRV ks auto-load check. (#1057271) (sbueno+anaconda)
- Make sure TUI is readable for non-latin languages (#1182562) (mkolman)
- Equalize capacity & mount point entries (#1212615) (dshea)
- Disable GRUB os_prober on POWER (#1193281) (rmarshall)
- Cancel Container Edit Sensitizes Update (#1168656) (rmarshall)
- Fix SoftwareSpoke._kickstarted. (dshea)
- Disable a Pylint false-positive (#1234896) (mkolman)
- Add support for autostep and --autoscreenshot (#1234896) (mkolman)
- Escape \'s in doc strings (dshea)
- Ellipsize the file system type combo box (#1212615) (dshea)
- Add graphviz to make-sphinx-doc script (jkonecny)
- Remove many of a documentation compilation errors (jkonecny)
- Add class diagrams to existing spokes and hubs (jkonecny)
- Add class diagram settings to documentation (jkonecny)
- Fix the UnusuableConfigurationError dialog (#1246915) (dshea)
- Chase pygobject's stupid moving target (dshea)
- Add missing translation contexts (dshea)
- Actually translate the container type labels (dshea)
- Check whether a translated string requires a context or comment. (dshea)
- Clean up the temporary pools virt-install makes. (clumens)
- Return the same object for repeated calls to __get__ (#1245423) (dshea)
- Use sys.exit instead of os._exit. (clumens)
- Add parentheses around the IPV6 regex fragment. (dshea)
- Add tests for IPv6 literals in URLs (dshea)
- Modify Installation Source Proxy Label (#11688554) (rmarshall)
- Require a newer version of pykickstart (vpodzime)
- Use dictionaries is thread-safe manner. (dshea)
- Merge pull request #234 from wgwoods/master (wwoods)
- Auto-load ks.cfg if OEMDRV volume available. (#1057271) (sbueno+anaconda)
- Check the encrypt checkbox when encrypted specified in KS (vtrefny)
- Do not raise KickstartValueError for missing passphrase (vtrefny)
- Ask for encryption passphrase when not specified in ks (#1213096) (vtrefny)
- dracut: minor cleanup (wwoods)
- dracut: fix missing messages for inst.ks=cdrom (wwoods)
- Wait forever for kickstarts on CDROM (#1168902) (wwoods)
- Use abs_builddir instead of builddir so paths will look more reasonable.
(clumens)
- Add a new makefile target that does everything needed for jenkins. (clumens)
- Merge pull request #228 from AdamWill/logind (dshea)
- Fix crash when mirrorlist checkbox is checked (jkonecny)
- Fix crash when user start typing proxy credentials (jkonecny)
- Check repository URL before leaving Source Spoke (jkonecny)
- Add IDs to identify addon repositories (jkonecny)
- Repositories can be checked without a selection (jkonecny)
- Consolidate the language environment variables. (dshea)
- Change the generated API indices slightly (dshea)
- Ignore "mountpoint" used a format specifier (dshea)
- filesystems -> file systems, per the style guide (dshea)
- Properly parameterize a translated string (dshea)
- Fix pylint errors in rescue.py. (dshea)
- Remove unused imports (dshea)
- Remove text.py from spec file (#965985) (sbueno+anaconda)
- Merge pull request #220 from AdamWill/1243962 (dshea)
- Fix adding 'boot=' option in FIPS mode (vtrefny)
- anaconda.target: Wants systemd-logind.service (#1222413) (awilliam)
- Remove the last usage of newt and get rid of it as a dependency (#965985)
(sbueno+anaconda)
- Enable anaconda to use the new rescue mode. (#965985) (sbueno+anaconda)
- Get rid of unnecessary constants in constants_text. (#965985)
(sbueno+anaconda)
- Get rid of some unnecessary files. (#965985) (sbueno+anaconda)
- Display verbose packaging errors to the user (bcl)
- Show source errors from refresh method (bcl)
- Fix the validate functions in the btrfs kickstart_tests. (clumens)
- Connect kickstart lang data to dnf-langpacks (#1051816) (dshea)
- Add simple_replace config file function (bcl)
- Remove some vestiges of the old packaging module (dshea)
- Remove window boot block detection functions. (dshea)
- Remove iutil.xprogressive_delay. (dshea)
- Simplify iutil.mkdirChain. (dshea)
- Decode wifi SSIDs into strings. (#1240398) (dshea)
- Actually use the temp directory so test files get cleaned up (dshea)
- Disable the output from rpmbuild (dshea)
- Remove stray references to python2. (dshea)
- Fix possible to start installation without network (#1221109) (jkonecny)
- Fix 'q' (to quit) do not work in TUI hub (jkonecny)
- act on the right objects when stripping URL protocols (#1243962) (awilliam)
- Fix 'App' object has no attribute 'queue' (#1243316) (jkonecny)
- Add O_CREAT to the open flags when extracting rpm files. (dshea)
- Move ostree gobject version check next to the import (#1243543) (bcl)
- Remove rpmfluff from the buildrequires. (dshea)
- Only import readline if readline is necessary. (dshea)
- use the right baseurl in run_install_test.sh. (clumens)
- Don't copy the environment when starting metacity. (dshea)
- Fix the use of a temporary file in SimpleConfig.write (dshea)
- Add a test for SimpleConfig.write(use_tmp=True). (dshea)
- Remove an unnecessary chmod when creating chrony.conf (dshea)
- Fix some bad uses of chmod. (dshea)
- Add a function to open a file with specific permission bits (dshea)
- Don't ask to start vnc if user specifies text mode. (#1202277)
(sbueno+anaconda)
- New Anaconda documentation - 23.15 (bcl)
- Add a helper for building Sphinx docs using mock. (bcl)
- Update Sphinx configuration for python3 (bcl)
- Running without a GUI can also raise ValueError in errors.py (bcl)
- parse-kickstart_test.py: fix driverdisk_test() (wwoods)
- Fix the spelling of "version" (dshea)
- User operation kickstart tests. (kvalek)
- Kickstart tests for UTC and LOCAL hwclock. (kvalek)
- Kickstart firewall tests. (kvalek)
- Fix Repository New_Repository has no mirror or baseurl (#1215963) (jkonecny)
- There's now a python3-rpmfluff, so revert this. (clumens)
- Fix a couple other pylint problems in the driver disk tests. (clumens)
- Merge pull request #194 from wgwoods/master (wwoods)
- dracut: fix boot failure waiting for finished/dd.sh (wwoods)
- Use builddir instead of srcdir to find the dd utils (dshea)
- Fix the dd_test for python3. (dshea)
- Fix %files to deal with compiled python3 modules (dshea)
- Add a bunch of gi.require_version calls (dshea)
- Temporarily disable the error about not importing rpmfluff. (clumens)
- Don't try to iterate over threads directly in wait_all. (clumens)
- Update the btrfs kickstart tests to use functions.sh. (clumens)
- Merge pull request #182 from wgwoods/dd-refactor (wwoods)
- driver_updates: fixes from patch review (wwoods)
- Don't be too picky about what name is --device=link (dshea)
- Ignore stderr output from parse-kickstart. (dshea)
- Add an option to execReadlines to filter out stderr. (dshea)
- Ignore interruptible system calls in the dd test (dshea)
- Fix an undefined variable in writeStorageLate (dshea)
- Connect zfcp entries to the discovery buttons (dshea)
- Connect iscsi activations to buttons (dshea)
- Connect the dasd number entry to the discovery buttons. (dshea)
- Add keyboard layouts on the row-activated signal. (dshea)
- Connect dialog inputs to default actions. (dshea)
- Remove unnecessary GtkNotebooks. (dshea)
- Re-save some dialog glade files. (dshea)
- Merge pull request #181 from wgwoods/master (wwoods)
- dd-refactor: dracut + build bits (wwoods)
- Add kickstart test for RAID1 (bcl)
- pass PYTHONPATH to the kickstart test framework (bcl)
- Write servers to chronyd.conf even if it's off (#1197575) (wwoods)
- Refresh advanced disks after disk summary dialog (#1226354) (bcl)
- parse-kickstart: just emit 'inst.dd=XXX' for driverdisk (wwoods)
- parse-kickstart: pylint fixes (wwoods)
- dd-refactor: new driver_updates.py + tests (wwoods)
- payload: fix driverdisk repos (wwoods)
- dracut: fix boot with inst.ks and no inst.{repo,stage2} (#1238987) (wwoods)
- Use the most recent versions of the btrfs, logvol, part, and raid commands.
(clumens)
- Allow /boot partition on iscsi with ibft (#1164195) (jkonecny)
- Add kickstart tests to test btrfs installation (vtrefny)
- Fix broken test by infiniband patch (#1177032) (jkonecny)
- Connect labels with keyboard accelerators to a widget (dshea)
- Add a test for dangling keyboard accelerators. (dshea)
- Use pocketlint for translation and markup checking (dshea)
- Flatten the glade test directory. (dshea)
- Add support for specifying arbitrary mkfs options. (clumens)
- Fix kickstart install with infiniband (#1177032) (jkonecny)
- anaconda-dracut: Fix sysroot mount for netroot (#1232411) (bcl)
- Add RAID swaps to /etc/fstab (#1234469) (bcl)
- network: catch another race when calling dbus methods on invalid devices
(rvykydal)
- network: GUI, add connection even when virtual device activation failed
(#1179276) (rvykydal)
- Fix IP / hostname mismatches when showing VNC server address (#1186726)
(rvykydal)
- Check also ipv6 default routes when looking for onboot=yes device (#1185280)
(rvykydal)
- Merge pull request #157 from wgwoods/master_dd_fixes (wwoods)
- Do not check dependencies on invalid payloads (dshea)
- network: don't set onboot=False for default autoconnections (#1212009)
(rvykydal)
- Fix the types used to write anaconda-tb-all.log (dshea)
- dd: drop unnecessary archive_read_data_skip (wwoods)
- dd_extract: -l should not extract modules+firmware (wwoods)
- dd: fix permissions on extracted files (#1222056) (wwoods)
- tests: add dd_tests (wwoods)
- Fix inconsistencies in the payload messages. (dshea)
- Fix install-requires and install-buildrequires (dshea)
- anaconda-dracut: Mount /dev/mapper/live-rw (#1232411) (bcl)
- Eliminate some false test results when running glade tests. (atodorov)
- Move the knowledge about network packages into ksdata.network. (clumens)
- Add an optional conditional to progress_report. (clumens)
- Move the big block of late storage writing out of install.py. (clumens)
- The attribute is named ostreesetup.nogpg. (clumens)
- Use the index in grubenv (#1209678) (bcl)
- Do not raise an exception on EINTR from os.close or os.dup2 (dshea)
- Merge pull request #154 from mulkieran/master-959701 (mulkieran)
- Improve focus behavior in the advanced user dialog (dshea)
- Re-save advanced_user.glade (dshea)
- Depsolve kickstarted packages on the summary hub (#961280) (dshea)
- Add a kickstart test for %packages --ignoremissing (dshea)
- Remove descriptions for RAID levels (#959701) (amulhern)
- No kexec-tools on aarch64 (bcl)
- Ignore EINTR errors in files unlikely to encounter them (dshea)
- Reimplement the open override for the dracut scripts (dshea)
- Wrap the only non-open call found by the new pocketlint checks (dshea)
- Redefine open to retry on EINTR (dshea)
- Remove __future__ imports (dshea)
- Use python 3's OSError subclasses instead of checking errno (dshea)
- Allow kwargs in eintr_retry_call (dshea)
- Remove explicit uses of /dev/null (dshea)
- Do not retry calls to close or dup2 (dshea)
- Remove another function from isys (dshea)
- Make dialogs behave better with timed input validation (dshea)
- Fix the password/confirm checks to work with delayed validation (dshea)
- Move the URL protocol removal out of the input check (dshea)
- Remove the vestigal capslock label from the password spoke (dshea)
- Re-saved a few glade files (dshea)
- Run set_status unconditionally from update_check_status (dshea)
- Do not run input checks for every keystroke of input (#1206307) (dshea)
- Add a method to execute timed actions early (dshea)
- Use comps.environments instead of comps.environments_iter (#1221736) (dshea)
- Merge pull request #83 from mulkieran/master-requires (mulkieran)
- Only show supported autopart choices in choices combo. (amulhern)
- Strip out device types that blivet is not able to support. (amulhern)
- Update blivet required version. (amulhern)
- Fix nfs4 stage2 and repo handling (#1230329) (bcl)
- Update upd-kernel so that it actually works (#1166535) (bcl)
- Fix passing ,nfsvers=3 to dracut (#1161820) (bcl)
- Require the python3 version of iscsi-initiator-utils (dshea)
- Fix the pylint pre-commit hook for python3 and pocketlint (dshea)
- Fix a type check to work with python 3. (dshea)
- Do not log Xorg output to tty5 (dshea)
- Make use of the restore_signals Popen argument (dshea)
- Don't allow /boot on iSCSI. (#1164195) (sbueno+anaconda)
- Merge pull request #127 from mulkieran/master-kickstart (mulkieran)
- Actually distribute the clickable message test, too (dshea)
- Fix disk argument passing to virt-cat in the ostree test. (clumens)
- Relabel all password and group files in %post (#1228489) (dshea)
- Deal with the order of ifcfg files not being guaranteed. (clumens)
- Add a __init__.py to fix up an error when running iutil_test.py. (clumens)
- Actually run the clickable message test (dshea)
- Add a false positive to pylint checking for S390Error. (clumens)
- Let the excludedocs test pass if there are only directories left. (clumens)
- Allow successful kstest results to provide more details. (clumens)
- The escrow_cert test cannot use autopart. (clumens)
- Don't warn on PyInit__isys being unused. (clumens)
- Test that root LV is encrypted. (amulhern)
- Deal with subprocess returning bytes in tests/lib/filelist.py, too. (clumens)
- Make anaconda+python3+pocketlint work. (clumens)
- Start using our new shared pylint framework in anaconda. (clumens)
- Remove our extra pylint checkers. (clumens)
- Remove a duplicate libselinux-python3 requires. (clumens)
- Run makeupdates with Python 2 for now (mkolman)
- Don't use the _safechars private property (#1014220) (mkolman)
- Make sure directory size is returned as int (#1014220) (mkolman)
- Only warn about missing yum-utils (#1014220) (mkolman)
- Make sure set_system_time() gets an integer (#1014220) (mkolman)
- Make sure the column number in TUI is an integer (#1141242) (mkolman)
- Python 3 compatible sorting fixes (#1014220) (mkolman)
- Make version comparison Python 3 compatible (#1014220) (mkolman)
- Don't apply numeric comparison on None (#1141242) (mkolman)
- Avoid comparing None to an integer (#1141242) (mkolman)
- Handle urllib split (#1014220) (mkolman)
- Don't try to decode strings (#1014220) (mkolman)
- Rename function attributes (#1014220) (mkolman)
- Replace raw_input() with input() (#1014220) (mkolman)
- Make iterators and their usage Python 3 compatible (#1014220) (mkolman)
- Convert Python 2 metaclass magic to Python 3 metaclass magic (#1014220)
(mkolman)
- Make the raise syntax Python 3 compatible (#1014220) (mkolman)
- Python 3 no longer does tuple parameter unpacking (#1014220) (mkolman)
- Make isys Python 3 compatible (#1014220) (mkolman)
- Set a correct mode for the tempfile (#1014220) (mkolman)
- Python 3 temp files no longer reflect external changes (#1014220) (mkolman)
- Make print usage Python 3 compatible (#1014220) (mkolman)
- Rename the warnings spoke to warnings_spoke (#1014220) (mkolman)
- Replace list comprehension with for at class level (mkolman)
- Make gettext usage Python 3 compatible (#1014220) (mkolman)
- Do not open tty5 for writing in the "a" mode (#1014220) (vpodzime)
- Do not use pykickstart's RepoData as a key in a dict (#1014220) (vpodzime)
- Do not run repo attrs' checks if they are not set up yet (#1014220)
(vpodzime)
- Don't depend on side effects of map() (#1141242) (mkolman)
- Don't use exceptions' message attribute (#1014220) (vpodzime)
- Addapt to string type changes (#1014220) (mkolman)
- Handle modules returning bytes in Python 3 (#1014220) (mkolman)
- Add and use function that makes sure we work with strings (#1014220)
(vpodzime)
- Handle modules requiring different string types in Python 3 (#1014220)
(mkolman)
- Remove sitecustomize (#1014220) (mkolman)
- Make ASCII conversions Python compatible (#1014220) (mkolman)
- Remove "is Unicode" tests (#1014220) (mkolman)
- Fix ASCII conversion tests (#1014220) (mkolman)
- Return a string when calling a program (#1014220) (mkolman)
- Handle subprocess returning bytes (#1014220) (mkolman)
- Handle latin-1 strings in locale -a output (#1014220) (mkolman)
- Open the VNC password file for binary writing (#1014220) (mkolman)
- Update parse-kickstart for python3 (#1014220) (bcl)
- Update driver-updates for python3 (#1014220) (bcl)
- Update python-deps for python3 (#1014220) (bcl)
- Add a test for parse-kickstart (#1014220) (bcl)
- Make the import Python 3 compatible (#1014220) (mkolman)
- Change configparser and queue imports (#1014220) (mkolman)
- Remove imports from the __future__ (#1014220) (mkolman)
- Use the imp module directly (#1014220) (mkolman)
- Use Python 3 versions of Python dependencies (#1014220) (mkolman)
- Use /usr/bin/python3 in scripts (#1014220) (mkolman)
- Use Python 3 versions of nose and Pylint (#1014220) (mkolman)
- Build the Anaconda widgets for Python 3 (#1014220) (mkolman)
- Update makebumpver for python3 (#1014220) (bcl)
- Fix Kickstart installation without default gateway errors out (jkonecny)
- Fix results checking in a couple ks tests. (clumens)
- Add kickstart tests for keyboard settings. (sbueno+anaconda)
- Add a kickstart test for lang settings. (sbueno+anaconda)
- Fix a % call inside _(). (clumens)
- Convert ntp-pools.* to using the new kstest functions and autopart. (clumens)
- Fix up the expected output in parse-kickstart_test.py. (clumens)
- Fix a couple more pylint problems in the s390 code. (clumens)
- Use the adapted Timezone class for kickstart data (vpodzime)
- Add a kickstart test for processing NTP servers/pools configuration
(vpodzime)
- Show error on invalid username attempts in TUI. (#1171778) (sbueno+anaconda)
- Fix dracut reads ksdevice from missing os enviromnent (jkonecny)
- Run kickstart tests through an LMC-like program, not LMC itself. (clumens)
- Move common kickstart_test code out into its own functions.sh file. (clumens)
- Switch to using autopart in the kickstart tests. (clumens)
- Fix a couple pylint errors. (sbueno+anaconda)
- Make anaconda changes necessary for libblockdev s390 plugin.
(sbueno+anaconda)
- Add a kickstart test for lvm with percentage-based sizes. (dlehman)
- Add kickstart test for basic fixed-size lvm layout. (dlehman)
- Add a kickstart test to validate the default fstype. (dlehman)
- Add kickstart test to test bond interface creation (jkonecny)
- Add kickstart test to test vlan creation (jkonecny)
- Fix --device=link and --device not specified (#1085310) (rvykydal)
- Add kickstart test to test hostname (jkonecny)
- Add a /boot to tmpfs-fixed_size.ks. (clumens)
- Fix bad warning message when user set illegal IP (jkonecny)
- Fix bad check of illegal ip address (jkonecny)
- Add a simple tmpfs kickstart test (mkolman)
- Add a kickstart test for escrow packets and backup passphrases (dshea)
- Fix a typo that caused us to discard corrected target sizes. (#1211746)
(dlehman)
- Don't pass anything to ./configure. (dshea)
- Fix a pylint problem in parse-kickstart_test.py. (clumens)
- Fix 0 choice in Language and Storage in TUI mode (jkonecny)
- Update html documentation for new boot-options section (bcl)
- Convert boot-options to ReST and include it in the Sphinx documents. (bcl)
- Add support to dnfpayload.py for addon NFS repos. (clumens)
- Fix IndexError: list index out of range (#1219004) (jkonecny)
- Fix a typo in proxy-kickstart.sh that was causing a test time out. (clumens)
- iSCSI Name Validation using regexes (sujith_pandel)
- Add kickstart tests for proxy usage. (dshea)
- In dracut, do not display a warning for network lines with just a hostname.
(clumens)
- Add transport adapters to support ftp and file fetching (dshea)
- Fix for "Kickstart installation fails..." (#1197960) (jkonecny)
- Allow passing kickstart tests to be run on the command line. (clumens)
- Automatically collect environment variables to be passed to ks tests.
(clumens)
- Use isinstance instead of type for doing type checks. (clumens)
- Remove yumpayload.py, its support files, and most references to yum.
(clumens)
- Fix the packages-and-group wildcard exclusion test (dshea)
- Set the GUI-selected environment in the ksdata (#1192100) (dshea)
- Don't crash if the disk model is None (#1215251) (dshea)
- Correct an error message in packages-and-groups-1.ks. (clumens)
- Switch from testing for emacs* to kacst*. (clumens)
- Tests that end in a traceback are failures, not successes. (clumens)
- Don't run run_report.sh from within run_kickstart_tests.sh. (clumens)
- If a kickstart test failed due to a traceback, display that. (clumens)
- Wrap device labels earlier (#1212586) (dshea)
- Remove the angle property from the device label (dshea)
- Get rid of the find button in the filter spoke. (dshea)
- Rearrange filter.glade (dshea)
- Fix errors in the vendor column renderers. (dshea)
- Fix some minor inconsistencies in filter.glade (dshea)
- Fix issues with advanced storage searching. (dshea)
- Remove duplicate entries from search combo boxes (dshea)
- Use named IDs for the filter type combo boxes. (dshea)
- Rearrange filter.glade the way glade wants it now (dshea)
- Add a reporting support script to kickstart tests. (clumens)
- Return a specific error code when a test times out. (clumens)
- Fix indentation in run_one_ks.sh. (clumens)
- Also remove all the fonts in the packages-and-groups-1 test. (clumens)
- Enable the basic-ftp and basic-ftp-yum kickstart tests. (clumens)
- Fix a typo in groups-and-envs-2.ks (clumens)
- Get NTP pools and servers from ksdata for the runtime config (vpodzime)
- Adapt to the new argument list for save_servers_to_config. (clumens)
- Remove the restriction that /boot be below 2TB for grub (#1082331) (dshea)
- Distinguish between NTP pools and servers in GUI (vpodzime)
- Add support for chrony pool directive (mlichvar)
- Add a readme pointing to the documentation (bcl)
- Sphinx docs - use source order (bcl)
- Add html documentation for Anaconda v23.7 (bcl)
- Place html docs under ./docs/html/ (bcl)
- Configure proxy settings for dnf payload (#1211122) (bcl)
- Change online action to change (bcl)
- Check for images/install.img first for netboot (bcl)
- Ignore addon and anaconda sections in handle-sshpw (bcl)
- Ignore %anaconda section in parse-kickstart (bcl)
- Change of label in iscsi storage spoke (jkonecny)
- Add support for reboot --kexec kickstart command (bcl)
- Add inst.kexec and --kexec support to reboot with kexec (bcl)
- Add setup_kexec method to prepare the system for a reboot with kexec (bcl)
- Add kickstart %pre-install section support (bcl)
- Remove the custom help button from the toolbar (bcl)
- Use multiple streams for zRAM instead of multiple devices (vpodzime)
- iscsi: pass rd.* options of devices to be mouted in dracut (#1192398)
(rvykydal)
- Remove the unused productName import from custom_storage_helpers.py.
(clumens)
- Remove the old custom partitioning help dialog (mkolman)
- Implement the new reqpart command. (clumens)
- Sort disks by name when checking disk selection (vpodzime)
- Set both .format's and .originalFormat's passphrase on unlock (vpodzime)
- Make the Encrypt checkbox insensitive for encrypted non-BTRFS devices
(#1210254) (vpodzime)
- Check for Gtk before importing escape_markup (bcl)
- If the network is disabled, also disable the network part of the source
spoke. (#1192104) (clumens)
- Add handling for unusable storage configurations. (dlehman)
- Allow markup in the label/message of DetailedErrorDialog. (dlehman)
- Allow passing an optional button list to showDetailedError. (dlehman)
- Allow kwargs with gtk_action_wait, gtk_action_nowait decorators. (dlehman)
- Fix makeupdates handling of Release: (bcl)
- Make sure we unmount the path we mounted (bcl)
- Fix up one more back_clicked reference that got missed. (clumens)
- Don't unconditionally set ksdata.lang.seen to True (#1209927) (mkolman)
- Reset the back_clicked flag if we stay on the Storage spoke (#1210003)
(vpodzime)
- Mark the back_clicked attribute of the Storage spoke as private (vpodzime)
- TUI pwpolicy setup was supposed to be in __init__ not refresh (#1208607)
(bcl)
- Preserve the order of boot args added by kickstart. (clumens)
- Revert "allow /boot on btrfs subvol or filesystem" (bcl)
- Connect scroll adjustments in the right class (#1206472) (dshea)
- Add a test for parse-kickstart (bcl)
- Add --tmpdir to parse-kickstart for testing (bcl)
- Use the correct format for IPMI messages. (clumens)
- Do not use min_luks_entropy with pre-existing devices (#1206101) (dshea)
- Remove the dnf cache directory when resetting the repo (dshea)
- Do not add separators to the addon list when not needed (dshea)
- Only use the instclass environment if it actually exists. (dshea)
