- Only use UUID= for devices we would have labeled. Related to #435228 (katzj)
- If we don't find a kernel package, then give a better error (katzj)
- Translation updates (cs, de)
- Fix a traceback when we have an error. Related to #433658 (katzj)
- Add virtio_pci in hopes of getting virtio working (katzj)
- Pull in the bits of pirut that we use so that we don't depend on pirut (katzj)
- Default to RAID1 instead of RAID0 (#435579) (katzj)
- Refresh po (katzj)
- Fix traceback leaving task selection screen (#435556) (katzj)
- More ext4 vs ext4dev nonsense. (#435517) (katzj)
- Fix reverse name lookup. (pjones)
- Don't write out /etc/rpm/platform anymore. (katzj)
- anaconda-runtime now needs yum-utils (katzj)
- Add 'testiso' target (katzj)
- Remove rescue cd creation scripts (katzj)
- Take --updates with location of additional updates beyond the package
set used (katzj)
- Change the ISOs we build (katzj)
- Take advantage of yum repos being available (katzj)
- Allow recovery from some missing repodata conditions. (clumens)
- Rework the repo editor screen to be more modular. (clumens)
- Move doPostImages to be run after the second stage build (katzj)
- Ensure that group info for txmbrs is accurate after we reset (katzj)
- Fix backwards logic for yum verbosity (katzj)
- No more arc (#435175) (katzj)
- Remove an unused method. (clumens)
- Use non-deprecated HAL properties. (notting)
- More crud to deal with the fact that rawhide trees are composed weird (katzj)
- Gtk does not have the error type, use custom with proper
icons. (#224636) (msivak)
- Fix up symlinks that could be broken with our movement here (#434882) (wwoods)
- pvops xen uses hvc as its console (#434763) (katzj)
- Follow symlinks when looking for the anaconda-runtime package. (jkeating)
- Write out UUID in the fstab (#364441) (katzj)
- Add support for getting UUID using libblkid (katzj)
- Fix calculation of sizes of LVs when resizing (#433024) (katzj)
- Add back some bits for text mode (katzj)
- Remove advanced bootloader bits (katzj)
- Add support for actually changing where the boot loader gets
installed as well (katzj)
- Less text. (katzj)
- Reorder things a little, clean up spacing (katzj)
- Use a tooltip instead of a long bit of text that most people
don't read (katzj)
- Remove advanced checkbox (katzj)
- Switch the grub installation radio to be a checkbutton. Cleanups for
grub only (katzj)
- Lets redirect to /dev/null to ensure that what we get in DIR is the
result of pwd. (jgranado)
- Catch the error emmited by lvm tools during logical volume
creation process (#224636). (msivak)
- Don't try to lock /etc/mtab, fix error detection when mount fails. (clumens)
- Don't append (null) to the NFS mount options. (clumens)
- There's no need to wait if the last download retry failed. (clumens)
- the '-o' is appended to the mount command in imount.c (jgranado)
- Use full path to device for mount in findExistingRootPartitions. (dlehman)
- Map preexisting encrypted devs before mounting everything
in mountRootPartition. (dlehman)
- Fix traceback on test mount in findExistingRootPartitions. (dlehman)
- Use SHA-512 by default for password encryption. (dcantrell)
- Clean up root password user interfaces. (dcantrell)
- Fix up firmware inclusion. This didn't actually ever work. (katzj)
- Fix up the groff related stuff for man pages to be done in the correct
place (katzj)
- remove yumcache (katzj)
- Don't do fixmtimes anymore (katzj)
- Don't compress translations (katzj)
- Don't manually duplicate things from package %post scripts (katzj)
- Remove some unused options (--discs and --buildinstdir) (katzj)
- Keep /etc/nsswitch.conf and /etc/shells (katzj)
- Stop forcing passive mode for FTP by patching urllib (katzj)
- We don't use timezones.gz anymore anywhere (katzj)
- We shouldn't need to remove files that are only in -devel packages (katzj)
- Remove some obsolete files from the list to clean up noise in the
output (katzj)
- We want nss bits on all arches these days (katzj)
- Just use default /etc/nsswitch.conf and /etc/shells (katzj)
- alpha should have translations probably (katzj)
- Remove some things that aren't used anymore (katzj)
- Don't run pkgorder as a part of buildinstall anymore (katzj)
- Remove duplicate file from the file lists (katzj)
- Don't use the static versions of these anymore as they're likely to go
away (katzj)
- Remove weird s390 hack that shouldn't be needed any more (katzj)
- Make makebootfat less noisy (katzj)
- Get rid of dangling fobpath stuff; now that we're not mounting to
create (katzj)
- Ignore .bak files created by glade (katzj)
- Get rid of duplication for yaboot stuff to make scripts less noisy (katzj)
- Correct internationalization of exception handler text (msw)
- More fixing of mount paths (#432720) (katzj)
- securitylevel -> firewall in the spec file. (clumens)
- Include util-linux-ng, which contains mount (#432720). (clumens)
- When mounting stage2 on loopback, add -o loop to mount opts. (clumens)
- Handle modules with more than one description (#432414) (katzj)
- Finish HDISO installs, at least for DVDs (#431132). (clumens)
- Move migration to before mounting filesystems (katzj)
- Fix silly thinko in Eric's patch (katzj)
- Allow ext3->ext4 upgrades (sandeen)
- Do the man pages in rescue mode the right way. (jgranado)
- Merge branch 'master' of ssh://git.fedorahosted.org/git/anaconda (notting)
- Use /etc/adjtime as the configuration file for UTC/not-UTC. (notting)
- Remove all our own mount code. (clumens)
- Use the mount program instead of our own code. (clumens)
- Add the real mount programs to stage1. (clumens)
- Use the correct variables to get the ipv6 info. (#432035) (jgranado)
- Update error messages to match function names. (dcantrell)
- Rename nl.c to iface.c and functions to iface_* (dcantrell)
- In rescue mode, show interface configuration (#429953) (dcantrell)
- Add qla2xxx firmware (#377921) (katzj)
- Rename base repo (#430806). (clumens)
- Remove dep on anaconda from pkgorder (katzj)
- Remove no longer used dumphdrlist script (katzj)
- Fix error message on continuing after changing cds with mediacheck (katzj)
- Fix the progress bar during mediacheck (#431138) (katzj)
- Ensure we disable SELinux if the live image isn't using it (#417601) (katzj)
- Correct nl_ip2str() cache iteration. (dcantrell)
- Check the fstype of the live image (katzj)
- Check for device existence rather than starting with /dev (katzj)
- The FL_TEXT flag has no reason to be here. (#207657) (jgranado)
- Don't traceback when getLabels is called with DiskSet.anaconda set
to None. (dlehman)
- Pass arguments correctly to anaconda (katzj)
- Cancel on escape being pressed with autopart resizing (katzj)
- Handle putting updates ahead of anaconda in the updates= case too. (clumens)
- Make sure the device name starts with /dev (#430811). (clumens)
- Revert "Initial support for network --bootproto=ask (#401531)." (clumens)
- (#186439) handle lv names with "-" when doing kickstart. (jgranado)
- Remove the last references to makeDevInode (#430784). (clumens)
- Don't traceback trying to raise an exception when making
users (#430772). (clumens)
- Include new firstboot module. (clumens)
- Conditionalize ntfsprogs as not all arches include it. (clumens)
- Remove kudzu-probe-stub. (clumens)
- Remove rogue references to kudzu. (clumens)
- Add dogtail support (#172891, #239024). (clumens)
- Fix some error reporting tracebacks. (clumens)
- Try to fix a problem creating users via kickstart (#428891, clumens)
- Fix a loader segfault doing kickstart nfs installs (clumens)
- Move more interactive steps ahead of partitioning (clumens)
- If we can't possibly add advanced devices, don't offer it (#429210, clumens)
- Don't flush after rescanning so recently attached disks are
available (clumens)
- If bootproto is dhcp, unset any static settings (#218489, dcantrell)
- Add some groups to pkgorder to make the CDs come out right (pjones)
- Fix traceback when using non-encrypted RAID (notting)
- Complete the patch for dhcptimeout (#198147, #254032, msivak)
- Require the latest libdhcp (dcantrell)
- Don't set currentMedia when we're on a network install (#428927, clumens)
- Don't offer two reboot options (clumens)
- Remove fsopts that are already defaults (#429039, clumens)
- Remove isofs module to get rid of a FATAL message (clumens)
- Add the crc32c kernel module for iscsi (#405911, clumens)
- Add MAC address to the network device selection screen (#428229, clumens)
- Initial support for network --bootproto=ask (#401531, clumens)
- Remove an extra newline (clumens)
- Add firstaidkit to the rescue image (jgranado)
- Fix the progress bar to hit 100% on the last package (#428790, clumens)
- Add some output so the startup delay doesn't seem quite so long (clumens)
- Initial kickstart support for encrypted partitions (clumens)
- Inherit from the right versions of pykickstart classes (clumens)
- Update for nss files moving to /lib (clumens)
- Remove unneeded arguments from detectHardware function (notting)
- Symlink all udev support binaries to udevadm (notting)
- /sbin/restorecon on /etc/modprobe.d (notting)
- Add the kickstart syntax version to the kickstart file (clumens)
- Require latest libdhcp to fix x86_64 SIGABRT problems
- Make it obvious which partitions are being formatted and encrypted (katzj)
- Set initial sensitivity of encrypt button correctly (katzj)
- Fix traceback on invalid passphrase (#426887) (katzj)
- Use mkstemp() instead of tempnam() (katzj)
- Don't resize filesystems which are being formatted (#426466) (katzj)
- Add cracklib-dicts (#426444) (katzj)
- Fix build (notting)
- Switch away from using kudzu in the loader (notting)
- Use udev in the loader and a dynamically linked stage1 (notting)
- Don't handle all aspects of module loading ourselves - just wrap
modprobe. (notting)
- Ensure there's an active net device (katzj)
- Fix error reporting messages (sfernand, #242252). (clumens)
- Don't immediately retry on downloading a package. (clumens)
- Update to work with new system-config-keyboard. (clumens)
- Validation of root password with cracklib (hhara)
- Minor fixes to liveinst shell script (katzj)
- Fix path to swapoff (katzj)
- Make doMethodComplete not depend on the yum backend (katzj)
- Remove another line related to the release notes (hhara)
- GPLv2+ changes. (dcantrell)
- Add support for encryption via autopart. (katzj)
- Avoid unnecessary downloading and caching by not
setting mediaid (#422801). (clumens)
- Don't copy the stage2 image over for NFS installs. (clumens)
- Remove an unused function. (clumens)
- Allow going back to package selection after transaction errors. (clumens)
- Add file conflicts to the transaction errors we show the user. (clumens)
- Remove isomd5sum/.gitignore (dcantrell)
- Add support for the Efika platform (dwmw2)
- Fix some tracebacks (clumens, #405951)
- Actually include the crypto mods (dlehman)
- Include more nss libs (clumens, #405921)
- Remove some cruft (notting)
- Use libblkid instead of our custom code for fstype and label probing
- Fix tty switching in graphical install
- Initial support for partition and LV resizing. VERY EXPERIMENTAL!
- Commit partitioning changes to disk earlier
- Add start of ext4 support
- Fix some tracebacks
- Add support back for alpha (Oliver Falk)
