(dlehman)
- Don't try to configure a bootloader for s390 disk image installs. (#1019502)
(dlehman)
- Fix initramfs generation for disk image installations. (#1019502) (dlehman)
- Save mountpoints specified for existing btrfs volumes. (#892747) (dlehman)
- Add a command line option for disabling friendly multipath names. (#977815)
(dlehman)
- Remove en (dshea)
- "Fix" the zSeries device filter "label" (dshea)
- Replace placeholders with the strings from python (dshea)
- Add and fix keyboard accelerators (dshea)
- Check for labels with use_underline and no accelerator (dshea)
- Support checking the translation of plural strings (dshea)
- Specify a node id in check_accelerator exceptions (dshea)
- BTRFS cannot hold swap, no need to care about fstab swaps (vpodzime)
- Add ANACONDA_INSTALL_CLASSES to testenv.sh. (clumens)
- Put a version on the DNF requirement. (clumens)
- Revert "For now, ignore checking dnfpayload.py with pylint." (clumens)
- Fix the alignment of the Network Time switch (#1019301) (dshea)
- Tell blivet which swaps should appear in the fstab (#1011391) (vpodzime)
- Put only newly created or reformated swaps to the new root (vpodzime)
- Make code to get new devices reusable as property (vpodzime)
- Grab journal only from the last boot (vpodzime)
- DNFPayload: allow enable/disable calls for repos that do not exist. (ales)
- Add shell spoke to s390x installations (vpodzime)
- Put TUI spokes in common categories (vpodzime)
- MountpointSelector is a widget, set its property properly (#1013612)
(vpodzime)
- Include the journal log on installed system (bcl)
- DNFPayload: error handling and logging cleanups. (ales)
- DNFPayload: reset the transaction goal on new package selection check. (ales)
- DNFPayload: implement environmentGroups() (ales)
- Some partition scheme is always selected (#1017435) (vpodzime)
- Remove the "other" tab in the network spoke. (dshea)
- Fix duplicated id in custom.glade (dshea)
- Correctly generate rescue initrd (#1013087) (bcl)
- Refresh swap suggestion once we know which disks to use (vpodzime)
- Initialize the kickstart install method (#1017614) (dshea)
- Use correct format for raise in kickstart.py (bcl)
- Add install-requires target to the Anaconda makefile (mkolman)
- fix luksformat references (#1014493) (bcl)
- kickstart: check for correct format (#1014545) (bcl)
- Add checks for unexpanded macros. (dshea)
- UIScreen doesn't necessarily have the ready property (vpodzime)
- Print long widgets in a nice way (vpodzime)
- Consider errno 5 I/O errors hardware faults (vpodzime)
- Install kernel-lpae if supported (#1013015) (vpodzime)
- Bump firewalld version (mkolman)
- Catch BootLoaderError when setting up bootloader (#1013474) (bcl)
- Fix an incorrect formatting string in makeupdates. (clumens)
- network: remove function we don't need anymore (rvykydal)
- Don't translate constant strings. (dshea)
- Take into account disk space when calculating swap suggestion (#1016673)
(vpodzime)
- DNFPayload: adapt to DNF change c3de85d6 of Base.install() error reporting.
(ales)
- DNFPayload: the new libcomps makes env.option_ids a list of GroupID objects.
(ales)
- Fix warning message when package version is not found in Koji (mkolman)
- DNFPayload: install DNF itself. (ales)
- DNFPayload: direct conf.persistdir to the sysimage. (ales)
- Add a tooltip to the container combobox (#975801) (bcl)
- Use different colors for different message types. (dshea)
- Exit on exception in the askVNC spoke (#962804) (dshea)
- Don't skip the strength check if overriding a kickstart password (dshea)
- Allow password spoke to be exited without password (#1004931) (dshea)
- Re-check the password strength when the username changes (dshea)
- Only call pwquality once per password. (dshea)
- Use GUICheck checks for the root password strength (dshea)
- Use constants for password check failure messages (dshea)
- Use a constant to indicate GUICheck success (dshea)
- Remove a redundant error property from UserSpoke (dshea)
- Fix the usages of PWQError. (#1014405) (dshea)
- Fix usage of GtkLevelBar in glade. (dshea)
- Clean up callbacks in the user spoke. (dshea)
- Removed an untrue portion of a doc comment (dshea)
- Support for removing services from firewall needs newer PyKickstart (mkolman)
- Add support for removing services from the firewall (#957809) (mkolman)
- Don't try to collect removed modules (vpodzime)
- Moved the NFS nolock option into Payload._setupNFS (dshea)
- Grab journalctl logs if there is no /tmp/syslog (vpodzime)
- Pass layout and variant in specific format to Gkbd (#1011155) (vpodzime)
- Translate the "Quit" string at the end of liveinst. (dshea)
- Turn spinner back on for configuration (bcl)
- Use assertIsInstance in the kickstart version test. (clumens)
- If the full device path is given in repo=hd:, still select it in the UI
(#980479). (clumens)
- Display newly created partitions without a mountpoint, too (#886039).
(clumens)
- Don't require pressing escape twice to kill the media check window (#965625).
(clumens)
- Fix display of weak password warning (#1011850) (dshea)
- Fix the tui simpleline imports. (dshea)
- Don't confuse users by misleading tooltip (#1011112) (vpodzime)
- Assorted other pylint fixes for scripts and utils (dshea)
- Pass string format arguments as paramters to logging (dshea)
- Ignore the use of func_globals in a test case (dshea)
- Fix issues in the AnacondaWidgets python wrapper (dshea)
- Make exception handling more specific (dshea)
- Remove unused imports and variables (dshea)
- Remove unnecessary lambdas (dshea)
- Remove obsolete files. (dshea)
- Check whether the commit matches the tree (dshea)
- Run pylint on all python files (dshea)
- Don't use relative imports (dshea)
- Use g_signal_handler_disconnect instead of g_object_disconnect (#1010486)
(vpodzime)
- Fixup Eula class (bcl)
- Allow searching for keyboard layouts in English (#1009806) (vpodzime)
- network: don't create ksdata for devices enslaved in GUI (#1011826)
(rvykydal)
- Allow a proxy to be set before the method is saved (#1012096) (dshea)
- Export the pykickstart Eula command (vpodzime)
(sbueno+anaconda)
- Escape the status before setting it as markup (vpodzime)
- network gui: do not crash on devices without settings (eg wireless)
(#1010519) (rvykydal)
- Make the keyboard layout preview dialog bigger (#1011140) (vpodzime)
- Return switching options with the same order as shown (#1011130) (vpodzime)
- Use a temporary directory for verifying ISO media (dshea)
- Skip devices not controllable by blivet (#1009809) (dshea)
- Add translation support to check_accelerators (dshea)
- Make sure autopart type is handled deterministicaly in text mode (#1010453)
(vpodzime)
- Don't rely on X server adding empty variant for its defaults (#1011658)
(vpodzime)
- Make Keyboard spoke's status consistent with other statuses (#1011166)
(vpodzime)
- LiveImageKSPayload skip the parent class setup method (#1010500) (bcl)
- Pass the actual format instead of Python built-in (#1009678) (vpodzime)
- Don't allow using updates with non-default network sources (#1008028)
(vpodzime)
- Use Sphinx documentation format in nm.py. (rvykydal)
- Changed the keyboard accelerator for iscsi "Retry Log In" (dshea)
- Only fail on a missing firewalld command if the firewall is enabled
(#1004976). (clumens)
- Cleanup some pylint failures in the network module (bcl)
- Add GtkNotebook support to the accelerators check. (dshea)
- Keyboard variant names may contain dashes (#1008730) (vpodzime)
- Forbid "root" as a user or group name. (#968451) (dshea)
- Set the password strength color based on strength (#965596) (dshea)
- Fix the password confirmation match check (#1009907) (dshea)
- Replace removed python modules with stubs in makeupdates (vpodzime)
- Unlock encrypted partitions before finding installations (#901917) (vpodzime)
- Network TUI: remove unused import, import nm. (rvykydal)
- Network TUI: show the same status as in gui. (rvykydal)
- Network TUI: don't traceback when applying config to device without link.
(rvykydal)
- Generate ifcfg VLAN_ID value for kickstart network --vlanid. (rvykydal)
- Network TUI: fix updating of ksdata in apply. (rvykydal)
- Network TUI: ignore slaves devices for configuration. (rvykydal)
- Clean up ifcfg file handling. (rvykydal)
- Check the validity of generated usernames in TUI (#965543) (dshea)
- Behave better when PYTHONPATH is already set (dshea)
- Decode keyboard layout descriptions as UTF-8 (#1009278) (dshea)
- Filter out devices with no media from custom (#960794) (bcl)
- Search all disk types for install media (#1004726) (dshea)
- git commit check for ack flag on rhel branches (bcl)
- Fix Lightbox for compositing window managers (#1008446) (dshea)
- Add metalink support to yumpayload (bcl)
- Make progress screen in text mode standalone spoke instead of hub (vpodzime)
- Render the right arrow based on the widget direction (#1008397) (vpodzime)
- Mirror the GUI if an RTL language is chosen (#1008397) (vpodzime)
- Removed unused GUI elements (dshea)
- Clean up what is and isn't translatable and how. (dshea)
- Removed the exceptionsText constant (dshea)
- Add comments for translators to TUI input strings (#854226) (dshea)
- Use python-format on all intltool-extract strings (dshea)
- Block resize slider value changed handler when setting range. (#1007387)
(dlehman)
- Remove an unused import. (clumens)
- Create the XklWrapper singleton in background (vpodzime)
- Translate layout and switching options descriptions on the fly (vpodzime)
- Improve XklWrapper's API (vpodzime)
- Move upcase_first_letter function to iutil (vpodzime)
- Remove the Layout class and things we don't need in XklWrapper (vpodzime)
- Ignore the whole m4 directory (vpodzime)
- Do not schedule hubs with no spokes available (#1006357) (vpodzime)
- Retranslate language filtering placeholder texts (#1007090) (vpodzime)
- Use pigz to create updates.img (vpodzime)
- The Desktop class doesn't need to inherit from SimpleConfigFile. (clumens)
- Fix yet another pylint error caught after the fact. (clumens)
- Move all languages found by geoip to the top in Welcome spoke (mkolman)
- Don't set ksdata.lang.seen to True if using default value (mkolman)
- DNFPayload: reset the sack and repos on updateBaseRepo() (ales)
- refactor: YumPayload: selectKernelPackage()->_select_kernel_package() (ales)
- DNFPayload: mirrorlist can not be an empty string. (ales)
- DNFPayload: display the download step in progressQ. (ales)
- DNFPayload: logging the missed packages/groups. (ales)
- DNFPayload: select kernel packages. (ales)
- DNFPayload: log when the transaction process unexpectedly terminates. (ales)
- DNFpayload: disable all NSS operations in RPM. (ales)
- DNFPayload: keyerror in isRepoEnabled() (ales)
- DNFPayload: implement selectEnvironment() (ales)
- Allow runpylint.sh to be passed files (bcl)
- handle case of no ifcfg and no hostname (#1002737) (bcl)
- Allow make targets to be run outside of $srcdir (dshea)
- Fix the wildcard usage in automake files. (dshea)
- Move the intltool Makefile rules into configure.ac (dshea)
- Fix a format parameter mapping (#1007472) (dshea)
- Check whether keyboard translations are stale (#972236) (dshea)
- Fix the handling of xklavier strings. (dshea)
- Center the Langsupport spoke's description (vpodzime)
- Set minimal width request for the locales box (vpodzime)
- Use constant for default keyboard layout (vpodzime)
- Try to use VConsole keymap name as X layout (#1007359) (vpodzime)
- Retranslate also layout indicator when retranslating BaseWindow (#1007087)
(vpodzime)
- Check ready state before baseRepo (#1007448) (bcl)
- Fix po/Rules-extract so it doesn't remove itself (dshea)
- Include LayoutIndicator and TimezoneMap to the Micsellaneous Widgets
(vpodzime)
- Remove 'completed' property from Autopart spoke in text UI. (sbueno+anaconda)
- Clean up code for input handling in TUI spokes. (sbueno+anaconda)
- set_hostname should proceed only on DVD and live installations (vpodzime)
- Don't use temporary file and move when writing out an ifcfg file (vpodzime)
- Set hostname when leaving network spokes (vpodzime)
- Keep file-naming convention with the Lightbox widget (vpodzime)
- Let users configure autopart options in interactive text ks. (#1001061)
(sbueno+anaconda)
- Add parameters to format strings (dshea)
- Fix pre-processing of files for xgettext (#1005644) (dshea)
- Added a test to check for xgettext warnings (dshea)
- Make sure XklWrapper isn't dumped to the anaconda-tb file (vpodzime)
- Catch race of network device state vs reading its config properties (#980576)
(rvykydal)
- Remove some more unused imports. (clumens)
- Move the Anaconda class to a proper module (vpodzime)
- Firstboot should be disabled by default after automated installations
(vpodzime)
- Fix typo introduced in refactorization (#1005511) (vpodzime)
- Remove unused imports in the network spoke. (clumens)
- Get rid of the now-unused new_firmware variable. (clumens)
- Remove magic from the passphrase dialog (#921948) (vpodzime)
- Don't pass extra arguments to LangLocaleHandler.__init__() (vpodzime)
- Fix check for device state when reading its IPXConfig (#1001776, # 1005198)
(rvykydal)
(dlehman)
- Always regenerate initramfs (#994180) (bcl)
- Avoid the use of NamedTuple._make (dshea)
- Add superclass __init__()s and fix an indent (dshea)
- Pass logging string format variables as parameters (dshea)
- Remove unnecessary variables, imports, semicolons (dshea)
- Fix the user/group name regex (dshea)
- Fix problems with the test scripts (dshea)
- Handle kickstarts that don't specify timezone (#1001598) (mkolman)
- Don't set "date of last password change" /etc/shadow field (#985572)
(hdegoede)
- Rearranged the automake tests. (dshea)
- Update po/ build files to the current gettext (dshea)
- Use libtool with gtkdoc-scanobj (dshea)
- Use autoconf to set the spec file Version. (dshea)
- Use the ustar format with make dist (dshea)
- Fix widgets autotools generation. (dshea)
- Require gtk-doc and GObject. (dshea)
- dracut no longer auto assembles everything (#960496) (bcl)
- Only ignore missing packages entries (#983316) (bcl)
- Fix a string that was modified before translation (#1004960) (dshea)
- Let users configure keyboard via anaconda in live installations (#1002533)
(vpodzime)
- Use copy instead of move for NTP configuration (#985566) (hdegoede)
- Share code between the Welcome and Langsupport spokes (vpodzime)
- Do not try to set None as hostname (#1002737) (vpodzime)
- Fix crash on LiveCD if network is configured before installing (#1002373)
(rvykydal)
- Warn user if they enter a weak password in TUI. (#1001039) (sbueno+anaconda)
- Don't mark spoke as completed if no repo is set. (#1001538) (sbueno+anaconda)
- Don't enable chronyd if disabled in kickstart (#1002583) (mkolman)
- Run firstboot-only spokes on first boot by default (vpodzime)
- Let hubs specify which environments they support (vpodzime)
- Don't mount cdroms that contain no mountable media. (#1000889) (dlehman)
- Don't try to parse langcode if none given (vpodzime)
- Get rid of the non-deterministic expand_langs and its usage (vpodzime)
- Rework the Langsupport spoke to work with all locales (vpodzime)
- Rework the Welcome spoke to allow users choose from all locales (vpodzime)
- Improve import in GUI utils a bit (vpodzime)
- Remove the cryptic "language-default keyboard" checkbutton (vpodzime)
- Allow seting up locale without modifying ksdata (vpodzime)
- Remove an unused argument of get_available_translations (vpodzime)
- Setup language early to a value we can figure out (vpodzime)
- Move the really_hide and really_show functions to utils (vpodzime)
- Search for all translations, not only one per langauge (#1001446) (vpodzime)
- Use the DEFAULT_LANG if GeoIP suggestion cannot be used (#1000715) (vpodzime)
- Network spoke: fix showing of ipv6 addresses (rvykydal)
- Use the sensitive-info log for sensitive location info (#986844) (mkolman)
- Add new logger for sensitive information (mkolman)
- Handle %define changes for autofetch (mkolman)
- Update dumping of network info for new nmcli interface. (rvykydal)
- Text network spoke: more strict ipv6 address input checking (#909299)
(rvykydal)
- Network spoke: show global ipv6 addresses (rvykydal)
- Text network spoke: add to translated files (po/POTFILES.in) (#902299)
(rvykydal)
- Text network spoke: require netmask and gateway for static ipv4 (#902299)
(rvykydal)
- Text network spoke: Condense device configuration information (#902299)
(rvykydal)
- Text network spoke: fix ipv4 regex (#909299) (rvykydal)
- Resolved accelerator conflicts and marked excpetions. (dshea)
- Added tests for duplicated keyboard accelerators (dshea)
- Implement group creation with GID in GUI (#968085) (dshea)
- Remove unused imports. (dshea)
- Move dynamic labels out of custom.glade (#1000703) (dshea)
- Add support for network configuration in TUI. (#909299) (sbueno+anaconda)
- Remove partial matches from Koji search results (mkolman)
- Handle >=,<=,= for package version, fix -a/--add (mkolman)
- Return only network devices supported in installer from nm_devices (#999514)
(rvykydal)
- Obtain network device type specific dbus interface dynamically (#999514)
(rvykydal)
- Catch no-hwaddr exception only for the respective call (#999514) (rvykydal)
- Don't catch hwaddr not found exception for ethernet devices (#999514)
(rvykydal)
- Added a validation test for the GUI group list (dshea)
- Validate input fields on the user spoke. (#967245) (dshea)
- Added an input validation framework. (dshea)
- Pre-fetch widgets in advanced user dialog (dshea)
- Change validatePassword to be more flexible. (dshea)
- Moved regexes into regexes.py. (dshea)
- makebumpver: Fix problem with single line body (bcl)
- For now, ignore checking dnfpayload.py with pylint. (clumens)
- Don't do str() on an exception we're passing into a string substitution.
(clumens)
- Check for hwaddress exceptions. (dshea)
- If LANG isn't set, set it to default value. (#997397) (sbueno+anaconda)
- Remove yet another unused import. (clumens)
- swap devices should be under the System portion (#962668). (clumens)
- Populate the repo store before changed can ever be called (#994940).
(clumens)
- Make the ISO choosing widget wider (#973376). (clumens)
- Don't recommend /usr as a separate mount point anymore (#981465). (clumens)
- Do not run another instance of the TUI for errors (#997661) (vpodzime)
- Do not try to exit from the installation thread (vpodzime)
- Tell which thread failed to be added by the ThreadMgr (vpodzime)
- Fix some pylint warnings in the new DNF code. (clumens)
- Fix a couple more pykickstart handler version mismatches. (clumens)
- anaconda requires a later version of partitioning syntax now. (clumens)
- packaging: add dnf to the Anaconda's requires. (ales)
- Enable DNFPayload on specific triggers. (ales)
- DNFPayload: initial version. (ales)
- refactor: tear down the install device in PackagePayload.reset(). (ales)
- refactor: extract the device handling in YumPayload._configureBaseRepo up to
PackagePayload. (ales)
- refactor: move YumPayload._setUpMedia() up to PackagePayload._setupMedia().
(ales)
- Tweaks in the Payload interface. (ales)
- remove: configureAddOnRepo from the Payload interface. (ales)
- Payload: forgotten comment in spaceRequired() (ales)
- Payload: define txID to None. (ales)
- The NFS text dialog should never attempt to use method.url (#998446).
(clumens)
- Remove the unittest target, since "make check" will do this for us. (clumens)
- Use the latest version of the RAID kickstart handler. (clumens)
- Update both the method and repo info. (dshea)
- remove the UBOOT class arm systems are now using EXTLINUX (dennis)
- ARM: switch to using extlinux by default (dennis)
- Update our pylint arguments. (clumens)
- Don't implicitly unpack exceptions. That won't be supporetd in the future.
(clumens)
- Modify how we call logging functions to take a list of parameters. (clumens)
- Use "raise Exception()" instead of "raise Exception, ..." (clumens)
- Hook up pylint and our nosetests to be run via "make check". (clumens)
- Drop unneeded required_space_text variable. (#997690) (dlehman)
- Specify also query script when getting locale's native name (vpodzime)
- Update runpylint.sh for pylint 1.0.0 (bcl)
- Clean up translation placeholders (#890157) (bcl)
- Don't override multilib setting unless the option was passed. (#987557)
(dlehman)
- Set the encoding of custom.py to utf-8 (dshea)
- Report if a package was not found in Koji during autofetch (mkolman)
- Convert makeupdates from getopt to argparse (mkolman)
- Fixed the interpretation of RAID levels (dshea)
- Consolidate get_object() calls. (dshea)
- Add ASCII-only upper and lower string functions. (dshea)
- Fix the User/Group already exists log messages. (dshea)
- Normalize keyboard layout and variant strings from langtable (vpodzime)
- A few tests for the keyboard layout and variant strings processing (vpodzime)
- More robust parsing of the layout and variant string specification (vpodzime)
- Move DEFAULT_VC_FONT to constants (vpodzime)
- Match langs with stripped accents when filtering languages (vpodzime)
- Fix the User subclass using an old version of the pykickstart superclass.
(clumens)
- Bring the kickstart version test back to life. (clumens)
- Don't read proxy for methods that have no proxy (dshea)
- Catch AttributeError when looking for InstallClass (bcl)
- dracut/parse-kickstart should use the updated method-related classes
(#994978). (clumens)
- Ignore warnings about the global keyword and the DefaultInstall class.
(clumens)
- Fix all the pylint warnings in the anaconda file. (clumens)
- Deal with the last of the catching Exception warnings. (clumens)
- Always define a continueButton and quitButton property. (clumens)
- Fix pylint warnings in the installclasses. (clumens)
- Remove a directory that does not exist from the PYTHONPATH for pylint.
(clumens)
- Fix up some warnings about calling the superclass's __init__ method.
(clumens)
- Remove the reference to "anaconda" in reIPL. (clumens)
- Fix up almost all of the redefining warning messages. (clumens)
- Add a bunch of gobject-introspection related ignore lines. (clumens)
- StorageChecker ought to have a self.storage attribute. (clumens)
- Ignore another error pylint can't quite figure out. (clumens)
- pylint doesn't understand what's in AnacondaKSHandler. (clumens)
- Remove the "Add custom add-on" button. (clumens)
- Fix up places where overridden methods don't take the same number of args.
(clumens)
- Fix up all unused variable warnings. (clumens)
- Added files to MAINTAINERCLEANFILES (dshea)
- Reenabled the pylint test target (dshea)
- Cleanup the autogen scripts. (dshea)
- Remove m4 files from the widgets project. (dshea)
- Install gettext files at build time. (dshea)
- Use the python checks provided by automake. (dshea)
- Added a missing type check found by autoscan (dshea)
- Cleanup the widgets autoconf file (dshea)
- Add detail to logs when creating users and groups (dshea)
- Fix miscellaneous errors in installclass.py. (clumens)
- Fix a variety of errors in the packaging module. (clumens)
- Do not run pylint against executable files in pyanaconda/. (clumens)
- Clean up deprecated uses of the string module. (clumens)
- Call the right superclass's method. (clumens)
- Straighten out text UI methods so they have the same method signature.
(clumens)
- Remove the lines to ignore E0611. (clumens)
- Bootloader.read is completely unused; cut it. (clumens)
- Fix all the "X is defined outside of __init__" warnings. (clumens)
- Display the correct string for the space required by packages. (clumens)
- Remove lines that clearly just don't do anything. (clumens)
- If we're not going to use the return value, don't grab it. (clumens)
- kernelVersionList in tarpayload.py should act the same as all other versions.
(clumens)
- If we're not going to use the exception object, don't grab it. (clumens)
- Define stage2_device in the BootLoader class. (clumens)
- Don't call getPassAlgo before running createGroup. (clumens)
- Remove some unused values out of constants.py. (clumens)
- Finish taking care of pylint warnings in image.py. (clumens)
- Remove the unused network and write methods from the Anaconda object.
(clumens)
- Remove the disable-msg lines for a couple C messages. (clumens)
- Remove some easy unused argument warnings. (clumens)
- Remove everything from InstallInterfaceBase except what Rescue needs.
(clumens)
- Remove the duplicated imports. (clumens)
- Do not use a list or a dict as a default argument to a method. (clumens)
- Remove unneeded lambdas. (clumens)
- Fix up all the warnings where we used a reserved function name or keyword.
(clumens)
- Fix up about half of the "except:" and "except Exception:" lines. (clumens)
- Fix a couple undefined variable errors that were real bugs. (clumens)
- Ignore statements that have no effect. (clumens)
- Fix up all the wildcard imports except two in packaging. (clumens)
- Remove all unused import lines. (clumens)
- Remove unnecessary pass statements. (clumens)
- Fix bad indentation and tab-instead-of-space warnings from pylint. (clumens)
- Put the pylint test back into service. (clumens)
- Run make with multiple jobs in makeupdates (vpodzime)
- Use gtk_image_new_from_icon_name (bcl)
- Remove caching of unused device list. (dlehman)
- Check MBR gap size even when /boot is on a plain partition. (#986431)
(dlehman)
- Fix the logging of the spice-vdagent status (dshea)
- Update PYTHONPATH so unit tests work right out of the source tree. (clumens)
- Don't check for a firstboot service file before processing the command.
(clumens)
- Strengthen the services command processing a bit. (clumens)
- Start spice-vdagent (#969405) (dshea)
- Skip password strength check for kickstart passwords (#986490) (dshea)
- Network spoke: fix refresh of device IP configuration (rvykydal)
- Add unsupported hardware dialog (#872728) (bcl)
- storage.py -> system.py in POTFILES.in (clumens)
- border_width=5 -> border_width=6 (clumens)
- No need to call threads_init anymore (bcl)
- Consolidate storage and networking under one category (#973013). (clumens)
- When doing a live install, set the ks method appropriately (#986069).
(clumens)
- Check that we're doing an HD install before examining the attr (#989428).
(clumens)
- Only move INSTALL_TREE when it is mounted (#888196) (bcl)
- Use ksdata.method.seen (#986069) (bcl)
- Threaded Koji RPM lookups and downloads (mkolman)
- Fix the langcode parsing regexp (vpodzime)
- Move tests to old_tests and add some new, working tests (vpodzime)
- Replace hostname with hostnamectl (#989584) (rvykydal)
- Require fcoe-utils only on ix86 and x86_64 architectures (#989913) (vpodzime)
- Fix searching for local RPMs with no version required (vpodzime)
- Expand the '~' in the RPM_FOLDER_NAME (vpodzime)
- Set system date and time with our own function (vpodzime)
- Remove the useless, confusing and lying PoolsNote (vpodzime)
- Use tiny, fast and thread-safe ntplib module instead of ntpdate (vpodzime)
- For vnc require network in intramfs (#989156) (rvykydal)
- Fix makeupdates' package fetching when no version is specified (vpodzime)
- Make it clear on the summary dialog that changes take effect later. (clumens)
- Don't mark the summary dialog's tree view as insensitive. (clumens)
- Work with files in a more pythonic way in makeupdates (vpodzime)
- Honor hostname set in kickstart (#988483) (rvykydal)
- Do not automatically set UTC mode on kickstart installs. (clumens)
- Add automatic fetching of RPMs for new Defines & Requires (mkolman)
- Don't prompt for ssh on s390x if doing an image install. (#983056) (sbueno)
- Rename tz spoke to avoid potential conflict with std 'time' module. (sbueno)
- Add support for NFS as install source in TUI. (#971298) (sbueno+anaconda)
- Allow logging into multiple iscsi nodes at once (#975831). (clumens)
- Fix crash while parsing ntp servers from DHCP6 (#969303) (dshea)
- Use ExceptionInfo namedtuple when dumping anaconda (#982299) (vpodzime)
- Wait for device connections for iface-bound iscsi in kickstart (#740105)
(rvykydal)
- Refer to blivet instead of storage in iscsi kickstart (#740105) (rvykydal)
- Mark disk 'selected' if only one present in TUI. (#975790) (sbueno+anaconda)
- Update devicetree only if we logged in to some target in add iscsi dialog.
(rvykydal)
- Don't show multipath members in specialized disks overview (#740105)
(rvykydal)
- Do not populate devicetree after each single login in iscsi dialog (#740105)
(rvykydal)
- Match also iface when logging into selected iface-bound iscsi target
(#740105) (rvykydal)
- Fix handling of non-ASCII names (#969309) (dshea)
- Use inline completion for the region/city selection (vpodzime)
- Fix copyright of the main anaconda script (vpodzime)
- Improve waiting for network connectivity (mkolman)
- Use langtable to get default layout instead of our magic (#485137) (vpodzime)
- Adapt to the new localization module (vpodzime)
- Rewrite the localization module (vpodzime)
- Make the Welcome spoke wait for Geolocation lookup to finish (#975193)
(mkolman)
- Don't call _update_summary from within _add_disk_overview. (clumens)
- getDisks should not return a list that has duplicates in it. (clumens)
- Fix the rescan button (#929299). (clumens)
- Let checkbox disable updates-testing (#962522) (bcl)
- disable updates when method is set in ks (#952791) (bcl)
- Fix string formatting on text UI storage spoke. (#965460) (sbueno+anaconda)
- Fixup TUI source to work with kickstart (bcl)
- Add missing disk_selection XML (#962012,#962631) (bcl)
- Add ability for users to specify an installation source repo in text UI.
(sbueno+anaconda)
- Add the ability to select software in text UI. (sbueno+anaconda)
- Add 'refresh' option in TUI; lock users out of threads that aren't ready
(sbueno+anaconda)
- Add 'software' category to TUI summary hub (sbueno+anaconda)
- Only try to activate layouts if runtime system can be changed (vpodzime)
- Be more defensive in handling layouts from kickstart (#963103) (vpodzime)
- Return all layouts the XklWrapper knows about (#883555) (vpodzime)
- Fix issue where FS selection not applied in text UI. (#964069)
(sbueno+anaconda)
(clumens)
- Use the same text formatting on the langsupport spoke as on the welcome
spoke. (clumens)
- Remove the now-unused LanguageMixIn. (clumens)
- Do not BuildRequire python-bugzilla on RHEL (#953182) (dcantrell)
- Don't require network configuration in Live DVD (#962485) (rvykydal)
- Set default FS choice to LVM in text mode (#962600) (sbueno+anaconda)
- Move udev rules generation to pre-trigger (#958924) (bcl)
- Suggest names for btrfs mountpoints (bcl)
- Use a method to reset current_selector (#959707) (bcl)
- Fix non-default language being hidden in welcome spoke (mkolman)
- Mark placeholder text in add addtnl keyboard screen as translatable.
(sbueno+anaconda)
- Mark language search string translatable. (#955229) (sbueno+anaconda)
- Remove the get_current_layout_name function (#895766) (vpodzime)
- Add support for the realm command (mkolman)
- Revert "Add support for the realm command" (mkolman)
- Add support for the realm command (mkolman)
- Support for getting NTP servers from DHCP (#862755) (mkolman)
- Add FONT=latarcyrheb-sun16 to /etc/vconsole.conf (vpodzime)
- Use ntpdate instead of rdate (#950267) (vpodzime)
- Add layouts with a country if not added with a language (#960569) (vpodzime)
- Fixup xconf keymap code for text/dirinstall (bcl)
- Bump pykickstart to 1.99.30 for liveimg support (bcl)
- Add kickstart liveimg install command (bcl)
- Make sure all threads are done before install (bcl)
- Make sure stage1_disk isn't empty (#950487) (bcl)
- Add /boot/efi to suggested mountpoints (#960677) (bcl)
- Add extlinux command-line option. (mattdm)
- Add extlinux as a bootloader type. (mattdm)
- Bump the pykickstart requirement for the extlinux patches. (clumens)
- Revert "Busy cursor when applying changes in the custom spoke" (mkolman)
- Revert "Context manager for doing things with busied cursor" (mkolman)
- Use the F19 bootloader class from pykickstart, for --extlinux (mattdm)
- Transform bootloader --extlinux to extlinux command-line option (mattdm)
- Rework the layout of the storage spoke for low resolution setups. (clumens)
- Fix lower resolution display problems on the filter spoke. (clumens)
- Don't show iscsi passwords when focused, either. Enjoy typing blind.
(clumens)
- Add a couple more things to .gitignore. (clumens)
- Remove the bootloader class's obsoletes attribute. (clumens)
- Disable sort indicators on the filter UI. (clumens)
- Remove the Viewport from the disk shopping cart. (clumens)
- Cleaning up some of the TUI storage code (sbueno+anaconda)
- Add ability in TUI for users to select partitioning scheme. (sbueno+anaconda)
- Use the firmware-provided language if it's something we support. (pjones)
- Use systemd-localed for writing out xorg conf file (#958714) (vpodzime)
- Busy cursor when applying changes in the custom spoke (vpodzime)
- Make sure the "unbusy cursor" is used for the exception window (vpodzime)
- Context manager for doing things with busied cursor (vpodzime)
- Revert "Add signal handlers for controlling password entry visibility."
(#958608). (clumens)
- Force a password to be set if option checked in TUI. (#927956)
(sbueno+anaconda)
- Fix a minor display issue in TUI. (sbueno+anaconda)
- hostname has dropped -v option (bcl)
- Only override proxy and noverifyssl if specified (#880482) (bcl)
- Add ability to manipulate container sizes directly. (dlehman)
- Don't lock users who chose custom storage out. (dlehman)
- Don't allow unhiding of hidden disks during disk image installs. (#956020)
(dlehman)
- Add layout indicator to the LUKS passphrase dialog (vpodzime)
- Add layout indicator to the BaseWindow (vpodzime)
- LayoutIndicator widget (vpodzime)
- self._password is set to None not "" initially (#958723) (vpodzime)
- Use constants for protocol's order instead of magic numbers (vpodzime)
- Support setting the name of a btrfs subvol (#892363). (clumens)
- If there are errors processing the kickstart file early on, just print them.
(clumens)
- Stop defining _, N_, and P_ all over the place. (clumens)
- Fix a probably rare traceback in resizing from the custom part UI. (clumens)
- Add methods to do some hiding/showing that we do several different places.
(clumens)
- Make it more obvious which fields on custom part are editable (#958251).
(clumens)
- Clean up some of the get_object usage in custom.py. (clumens)
- Streamline DatetimeSpoke's timezone updating (#953311) (vpodzime)
- Allow setting timezone on the map without signal (vpodzime)
- Sensitivity of the date&time settings doesn't depend on timezone (vpodzime)
- Give the RAID level label on custom a mnemonic widget. (clumens)
- Give the hostname entry a keyboard shortcut. (clumens)
- Add scratch-bumpver target (bcl)
- Add Driver Update Disk repo handling to Anaconda (bcl)
- Add Driver Update Disk support to anaconda-dracut (bcl)
- Port driver update utilities from loader (bcl)
- Fix a typo. (clumens)
- Do not translate a blank window name. (clumens)
- Add a separator under the default language on the welcome screen. (clumens)
- Move the selected language to the top of the list on the welcome screen.
(clumens)
- Remove the unused LanguageSpoke. (clumens)
- Add the "Add FCoE" dialog (#903122). (clumens)
- Allow enabling /etc/anaconda.repos.d repos like the docs say (#955724).
(clumens)
- Move where the password quality checker is created (#956049). (clumens)
- Allow multiple disk selection with Shift-click (#864707) (vpodzime)
- Select all disks in the box with advanced storage as well (vpodzime)
- Don't change DiskOverview's background on 'chosen' changed (vpodzime)
- Fix number of arguments for languageGroups (liveDVD class) (#957038)
(rvykydal)
- Apply some minor padding fixes on the container editing dialog. (clumens)
- If no root password was given, lock root's account (#927922). (clumens)
- Remove some unneeded boxes and alignments in the NTP config dialog. (clumens)
- Default to using the iscsi discovery credentials for login, if provided.
(clumens)
- langsupport spoke: keep data.lang.lang first in status of spoke (rvykydal)
- Unpack property value returned by GDBus before using it (#956614) (rvykydal)
- Don't traceback when no activated devices were found for ks network default
(#956614) (rvykydal)
- Ask about VNC also in connecting state, not only connected (#952801)
(rvykydal)
- Include swap-related disk space needs in storage options dialogs. (#951269)
(dlehman)
- Show the summary screen before the luks passphrase dialog. (dlehman)
- Add language support spoke (#912364) (rvykydal)
- Add kickstart lang --addsupport option (#912364) (rvykydal)
- Add network --ipv6gateway kickstart option (#905226) (rvykydal)
- Remove pre-18.0 history from anaconda.spec. (clumens)
- Add free space information to DiskOverviews (#949746). (clumens)
- Raise exception if our module fails to be imported (vpodzime)
- Fix exception handling in rescue mode (vpodzime)
- Select all disks when Ctrl+A is pressed (#864707) (vpodzime)
- DiskOverview needs to grab focus if clicked (vpodzime)
- Hook the Geolocation module to Anaconda (mkolman)
- Add geolocation module (mkolman)
- Add logging to exception handling (vpodzime)
- Run exception handling in the main thread also in TUI (vpodzime)
- Update network ksdata with cmdline options (#893784) (rvykydal)
- Return network devices actually activated (instead of just active) (#949002)
(rvykydal)
- Don't traceback if we can't find PermHwAddr when looking for slaves (#949341)
(rvykydal)
- Add support for iSCSI iface binding. (rvykydal)
- Fix a traceback when handling node login authentication. (clumens)
- Add a requirement on python-IPy now. (clumens)
- Display individual buttons on the filter UI instead of a combo. (clumens)
- Hook up authentication for iSCSI discovery and node login. (clumens)
- When the clear button is clicked on the filter spoke, clear out the fields.
(clumens)
- Remove the extra "Target LUN" search option. (clumens)
- If all iSCSI nodes have been logged into, leave the dialog. (clumens)
- Populate the port combo on the filter spoke's search page. (clumens)
- Hook up filtering for iSCSI devices. (clumens)
- Add initial iSCSI support to the advanced storage UI. (clumens)
- Add a generic function to FilterPage for setting up a GtkComboBoxText.
(clumens)
- self.disks -> self.pages in filter UI refresh method. (clumens)
- Add a button to bring up the Add Additional dialogs. (clumens)
- Remove pixmaps no longer needed by newui. (clumens)
- Add a checkmark on a DiskOverview when it is selected. (clumens)
- Make a couple UI modifications to the resize slider. (clumens)
- Make several changes to how addons are displayed (#873498). (clumens)
- Allow clicking on environment and addon text to toggle them (#928010).
(clumens)
- Fix scrolling problems on the environment side of software selection
(#928008). (clumens)
- Handle quit messages on the text progress UI hub (#895756). (clumens)
- If there's an error while in text mode, display it. (clumens)
- Force sizes on the network toolbar buttons (#951580). (clumens)
- Disable the "Closest mirror" option if there's no fastestmirror plugin
(#876135). (clumens)
- Move text UI summary hub setup into the setup method (#927315, #950956).
(clumens)
- Bring the text storage spoke a little more in line with the graphical one.
(clumens)
- Make a home directory for the user by default (#950792). (clumens)
- Add some padding under the ransom notes on the progress hub. (clumens)
- Remove a lot of ancient crud from the installclasses. (clumens)
- Set the default fs type on RHEL (#951088). (clumens)
- Add a Spoke.changed attribute. (clumens)
- Display device names on MountpointSelectors (#888872). (clumens)
- Add signal handlers for controlling password entry visibility. (clumens)
- Ransom notes can be either PNGs or JPGs. (clumens)
- dracut/parse-kickstart: handle network --mtu (wwoods)
- Exclude a couple more password variables from dumps (bcl)
- Enlightbox dialogs in the custom spoke (vpodzime)
- Create and use GtkWindowGroup for our windows (vpodzime)
- We can import Gtk globally now (vpodzime)
- Handle both types of data we can get from libxklavier (#950921) (vpodzime)
- Fix another typo (old_fstype->old_fs_type). (#951593) (dlehman)
- Fix typo encryption_changed->changed_encryption. (#950700) (dlehman)
- Remove some remnants of old multipath code. (#951259) (dlehman)
- Protect the block device containing the stage2 image. (dlehman)
- Clarify code for iutil.get_active_console() etc. (wwoods)
- Fix ip= saving in parse-kickstart (hamzy)
- Fix initial raid level when switching to a raid-capable device type.
(dlehman)
- The raid level combo cannot be not sensitive for preexisting devices.
(dlehman)
- Make sure fstype combo is not sensitive for btrfs devices. (dlehman)
- Add an entry to the raid level combo for btrfs' single. (dlehman)
- Clean up _save_right_side and adapt to changes in blivet.devicefactory.
(dlehman)
- Remove anaconda's udev rules. (dlehman)
- Add requires for some things that aren't strictly required by blivet.
(dlehman)
- Parent's finalize method needs self (vpodzime)
- Use Sphinx syntax for docstrings (vpodzime)
- Use None for unbounded size requests. (dlehman)
- Disable yum lock debugging for the final release. (clumens)
- The source spoke should display something nicer than "Not ready" (#948112).
(clumens)
- Don't run storage execution in an endless loop (#948331, #948285). (clumens)
- If an incorrect source is given for a ks install, don't fallback (#948212).
(clumens)
- Fix a bug when creating a new mountpoint with no given size (#948228).
(clumens)
- memInstalled has moved (#947261). (clumens)
- Correctly report an error if OSError is hit when setting up the source
(#947634). (clumens)
- Add anaconda-yum to %files (bcl)
- Add module providing safe DBus operations (vpodzime)
- Define a DEFAULT_DBUS_TIMEOUT constant and use it (vpodzime)
- Execute the yum transaction in another process (bcl)
- Add anaconda-yum (bcl)
- Add execReadlines utility (bcl)
- Use namedtuple instead of our magic tuples (vpodzime)
- Tell python-meh architecture of the anaconda package (vpodzime)
- Add release number to the result of getAnacondaVersion (vpodzime)
- Fix _isys.so location in the updates.img (vpodzime)
- Network spoke: Fix reading of device type from combobox (#947120) (rvykydal)
(clumens)
- The Update Settings button should only be sensitive if you change something.
(clumens)
- Move datetime spoke initialization into its own thread, too. (clumens)
- Make it more clear nothing will happen immediately on custom storage
(#883195). (clumens)
- Replace the custom part size spinner with an entry. (clumens)
- Add a factory class for our various communications queues. (clumens)
- Make exception handling in the rescue mode work (#926913) (vpodzime)
- Don't allow setting a mountpoint for an fstype we cannot mount. (dlehman)
- Fix a bug I introduced with 3c78c1a5c. (clumens)
- Get rid of the customization expanders on custom partitioning. (clumens)
- Translate the "Create a new volume group..." text (#892782). (clumens)
- Move the Desired Capacity label and spinner into its own row (#907883,
#904999). (clumens)
- move Xorg test up so we might start vnc instead (hamzy)
- Set word wrapping on the label telling you how to switch layouts (#924885).
(clumens)
- gtk_thread_wait -> gtk_action_wait in custom.py (#926926). (clumens)
- Support multiple values for kicstart network --namserver= in dracut (#917481)
(rvykydal)
- get_widget -> get_object (#927898). (clumens)
- THREAD_* constants are in pyanaconda, not pykickstart. (clumens)
- Network spoke: fix model access thinko in Add device dialog (rvykydal)
- Use constants for thread names (mkolman)
- Move network connection timeout from network to constants (mkolman)
- udev-settle.service is now systemd-udev-settle.service (wwoods)
- Add boot-options.txt (wwoods)
- Use space instead of underscore when user uses the timezone name (#924352)
(msivak)
- Use only self.data in TUI timezone spoke's status (msivak)
- Use the named tuple in root password dialog (#924138) (msivak)
- Add message instructing users they can type to search for language.
(sbueno+anaconda)
- Don't unbusy the cursor until the first action is ready to display. (clumens)
- Move custom storage setup into its own thread. (clumens)
- When you turn off NTP, clear the warning along the bottom of the screen.
(clumens)
- If the disk has no serial number, don't give the DiskOverview a popup.
(clumens)
- Reorder the columns on the shopping cart so name is next to description.
(clumens)
- Add device node names to the resize dialog as a new column. (clumens)
- Use an emblem for indicating spokes have not been completed. (clumens)
- If you remove all the disks in the shopping cart, disable the buttons.
(clumens)
- Apply a style to the network spoke's toolbar. (clumens)
- Add a little more space between the updates checkbox and the add repo stuff.
(clumens)
- Remove the partition scheme expanders. (clumens)
- Don't error out if a ks %include is missing when looking for sshpw
(#923627). (clumens)
- Do not guess username immediately when user clears it (#924184) (msivak)
- Do not require password when no user is requested (#924150) (msivak)
- Refresh the checkboxes on AdvancedUser dialog properly (#924257) (msivak)
- Allow setting the default GID of the new user. (msivak)
- Add call to new-kernel-pkg --rpmposttrans (#922988) (bcl)
- Make our gtk_* decorators safer and more intelligent (vpodzime)
- Add method for checking if in main thread to the ThreadManager (vpodzime)
- Port the mandatory logic for User and Password spokes from GUI to TUI
(msivak)
- Use only self.data to determine completeness in User spoke (msivak)
- Make firstboot kickstart command aware of initial-setup (msivak)
- Add command and data updates to AnacondaKSHandler's __init__ (msivak)
- Add some documentation to FilterPage. (clumens)
- Add the advanced storage UI and hook it up. (clumens)
- Don't wrap the DO creation in gtk_thread_wait. (clumens)
- Add a button to the specialized window to bring up the add dialog. (clumens)
- Filter out multipath devices from the getDisks results. (clumens)
- Reduce duplicated code between the GUI and TUI. (clumens)
- Set the horizontal and vertical scales to what we want. (clumens)
- Move DiskOverview creation out into its own method. (clumens)
- Add a slot on the storage spoke for display of advanced storage. (clumens)
- Log the actual exception for getPackage (bcl)
- Add the addon repos from a repo's treeinfo file (bcl)
- Disable failed repos, not remove them (bcl)
- Add repo addon to source spoke (bcl)
- Remove the previous addon repo code and UI (bcl)
- Addon repo glade changes (bcl)
- Enable updates repo by default (bcl)
- Adjust _getTreeInfo so that proxy_url can be passed (bcl)
- Add enable flag to RepoData object (bcl)
- Modify repo interface in packaging (bcl)
- Change the source DiskOverview to a label (bcl)
- Display the reason for payloadInstallHandler error (bcl)
- Fix reclaiming disk space for non-us installations. (rvykydal)
- Allow for raising thread exceptions when threadMgr.get is called (bcl,
clumens). (clumens)
- Hook up the new refresh dialog. (clumens)
- Add a dialog prompting the user to refresh anaconda's view of storage.
(clumens)
- Add a refresh button to the custom partitioning toolbar. (clumens)
- Add a reset button to the bottom right of the custom spoke. (clumens)
- Hook up the new action summary dialog. (clumens)
- Add a summary screen of actions to be performed on all disks. (clumens)
- Catch error when incorrect nfs address entered (sbueno+anaconda)
- Use GDBus also for connection settings update. (rvykydal)
- Network spoke: improve message format parametrization for translators
(rvykydal)
- Don't set ibft device renaming for dracut, let it just do its job (#828505)
(rvykydal)
- Mark Timezone selection as firstboot spoke (msivak)
- Add user creation spoke to TUI (msivak)
- Refactor TUI password spoke to use the declarative EditTUISpoke (msivak)
- Use guess_username from pyanaconda.users in gui.spokes.UserSpoke (msivak)
- Add declarative EditTUISpoke (msivak)
- Allow modyfying exit question in TUI (msivak)
- Return False from TUI.run() if it was exited prematurely (msivak)
- Add guess_username function to users.py (msivak)
- Mark incomplete mandatory spokes in text mode (msivak)
- Network spoke: move formatting parameters out of translation function
(rvykydal)
- Network spoke: add keyboard accelerator to add device combobox (#906263)
(rvykydal)
- Network spoke: don't decorate add_device_dialog (#906263) (rvykydal)
- Don't pass undefined stdout from execWithCapture. (rvykydal)
- Network spoke: import network module instead of list of too many functions
(rvykydal)
- Vlan support: kickstart (#906272) (rvykydal)
- Vlan support: generate kickstart (#906272) (rvykydal)
- Vlan support: GUI - hub status information (#906272) (rvykydal)
- Network spoke: check whether added network device is already in list
(#906272) (rvykydal)
- Vlan support: GUI - add "Vlan ID" and "Parent" to vlan tab (#906272)
(rvykydal)
- Return correct nm_device_setting_value for bonds and vlans (#906272)
(rvykydal)
- Vlan support: GUI - show vlan devices (#906272) (rvykydal)
- Vlan support: GUI - add "Parent" and "Vlan ID" info (glade) (#906272)
(rvykydal)
- Vlan support: GUI - add vlan device (glade) (#906272) (rvykydal)
- Show that password was set by kickstart in TUI (msivak)
- Add settable quit message to TUI (msivak)
- Check _current_action for not being None before using it (vpodzime)
