- Workaround compile error due to (# 478663) (hdegoede)
- Various packaging fixed from review (#225246) (hdegoede)
- Show the header in certain non-lowres cases (#478765, alsadi AT
ojuba.org). (clumens)
- Remove doMultiMount. (clumens)
- Use mount -t auto instead of passing a list of valid fstypes (#477328).
(clumens)
- Fix case sensitivity when searching for headers (kanarip)
- Fix a traceback in checking for network install (ricky AT
fedoraproject.org). (clumens)
- Reduce direct D-Bus calls in isys/iface.c. (dcantrell)
- Allow 'ks' to function as it once did (#471812) (dcantrell)
- Fix telnet install support (#471082) (dcantrell)
- Call 'udevadm settle' instead of 'udevsettle'. (dcantrell)
- When using anaconda with kickstart file with UI mode - do not show the VNC
question (#476548) (msivak)
- Check error from asprintf() correctly for dhcpclass handling. (dcantrell)
- Use libnm_glib in net.c:get_connection() (dcantrell)
- Add libnm_glib CFLAGS and LIBS to loader's Makefile. (dcantrell)
- BR NetworkManager-glib-devel. (dcantrell)
- Only write the short hostname to the localhost line (#474086) (dcantrell)
- Updated Tajik Translation - Victor Ibragimov (victor.ibragimov)
- Copy /etc/dhclient-DEV.conf file to target system (#476364) (dcantrell)
- Use macros for D-Bus paths (dcantrell)
- Let X tell us when it's launched rather than just sleeping. (ajax)
- When there's no baseurl, set a default of [] instead of [''] (#476208).
(clumens)
- cracklib now raises exceptions on bad passwords (rzhou, #476312). (clumens)
- Make sure ssh doesn't get duplicated in the open port list (#474937).
(clumens)
- mdraid1: default to putting grub on partition instead of mbr (#217176)
(hdegoede)
- Don't install the games group as part of office/productivity (#472324).
(clumens)
- Don't dump encryption passphrases. (dlehman)
- Write anacdump.txt upon receipt of SIGUSR2 (from clumens). (dlehman)
- Use stacks instead of tracebacks in traceback handlers. (dlehman)
- Unmount swap devices when migrating filesystems, then reactivate
(#473260). (clumens)
- Handle both /dev/sr0 and sr0, since that's what cdromList gives (#475083).
(clumens)
- In iface_ip2str(), make sure to advance to next item before continue.
(dcantrell)
- We already have _GNU_SOURCE defined in Makefile.inc (dcantrell)
- Remove XXX comment in net.c about GATEWAY (dcantrell)
- Use strverscmp() from glibc in place of rpmvercmp() (dcantrell)
- Remove readLine() function from loader/loadermisc.c (dcantrell)
- Do not write SEARCH line to ifcfg-DEVICE file (#474858) (dcantrell)
- Preserve existing network configuration files during install (#461550)
(dcantrell)
- Send unique vendor class identifier unless user specifies one. (dcantrell)
- Avoid tracebacks when filling in static network config fields (#474275)
(dcantrell)
- Prevent network install when no network devices are found (#470144)
(dcantrell)
- Remove markup from text before printing it in cmdline mode (#470253).
(clumens)
- Move strip_markup() into iutil. (clumens)
- Fix up plural forms header so that python doesn't blow up for us (katzj)
- Change text to reflect Jesse's comments (katzj)
- Add support for the Tajik language (#455963). (clumens)
- Add a button to the UI to ignore all missing packages. (clumens)
- First small eu.po transtation, just to be sure that the system is set up
OK. (mikel.paskual)
- mini-wm: Turn on automatic window redirection. (ajax)
- Better naming for LVM volume groups and logical volumes (#461682)
(dcantrell)
- Partition requests can be None when populating the tree. (#474284)
(dlehman)
- Say we are unable to configure the network interface (#467960) (dcantrell)
- Match textw/network_text.py strings to iw/network_gui.py (#470145)
(dcantrell)
- In addSnap(), check snapshots for data key before continuing (#433824)
(dcantrell)
- Load FCP modules early for CD/DVD install (#184648) (dcantrell)
- Update mk-s390-cdboot.c to work with large kernel images (#184648)
(dcantrell)
- Make sure fstype exists before we try to test it (#473498). (clumens)
- Updated a small correction in kn locale (svenkate)
- Use modules.* files for finding modules of a type rather than modinfo
(katzj)
- Make complete text mention updates (#244431) (katzj)
- Make text for autopartitioning types clearer (#441350) (katzj)
- Allow installing grub on the MBR if /boot is on mdraid (#217176) (hdegoede)
- Fix some spelling errors in German translation (fabian)
- Make the required media dialog less wordy (#469557). (clumens)
- returnNewestByName now raises an error instead of returning [] (#472462).
(clumens)
- Fix death on login of an OLPC on a live image (katzj)
- Fix ld-*.so globbing for glibc-2.9 . (pjones)
- Do not bring up network for non-remote kickstart locations (#471658)
(dcantrell)
- Resolve dm-X devices returned by pvdisplay. (#448129) (dlehman)
- More shell script syntax fixing (katzj)
- Only bring up the network dialog on package failures if required
(#471502). (clumens)
- Don't have the key icon take up so much space on the LUKS dialog
(#470338). (clumens)
- Avoid getting linux-base in the kernel list (katzj)
- Deselect groups when we reset things also (#469854) (katzj)
- make iscsi login code wait for udev to create the devices (#466661,
#470073) (hdegoede)
- Set the correct path when using the directory chooser. (clumens)
- We always need a wait window, not just when the repo has a name. (clumens)
- Set initial state of IP configuration fields in text mode (#469933)
(dcantrell)
- Prevent traceback when there are no network devices (#469339) (dcantrell)
- Indentation fix. (pjones)
- Let users edit net settings on network failure in stage 1 (#465887)
(dcantrell)
- Move startNewt later to avoid printing extra messages on the screen
(#469687). (clumens)
- Revert "Make sure dialog deletions take effect sooner (#455676)." (clumens)
- Don't set up the launcher for the installer on XO (katzj)
- Whitespace cleanups for timezone.py (dcantrell)
- Do not store mount options in loaderData->instRepo (#467760) (dcantrell)
- Make sure we look up the IP address for the correct device (#469439)
(dcantrell)
- Remove unused bool() function. (dcantrell)
- Check for required space for / on live installs (#468867) (katzj)
- Add a basic method for checking the minimal size needed for a backend
(katzj)
- Fix typo that somehow snuck in (katzj)
- If there's no language selected, don't traceback (#469578). (clumens)
- Improve filtering of non-available groups (#469438) (katzj)
- filer.py: set defaultProduct in __init__ (hdegoede)
- Fix indentation error in filer.py (again) (hdegoede)
- Rebuild keymaps to get rid of trq.map (#469433). (clumens)
- Provide sample punch card reader script for s390x (#462953) (dcantrell)
- Fix a typo that shouldn't have even gotten though. (clumens)
- Check that the platform and product are also correct (#469367). (clumens)
- Remove cio_ignore functionality for s390x (dcantrell)
- Remove bootdisk/s390 (dcantrell)
- If method=nfs: is given, check if it's really an NFSISO install (#468885).
(clumens)
- Get the right list elements for the iscsi text interface (#466902).
(clumens)
- Don't traceback when displaying error messages (#469372). (clumens)
- Make sure we differentiate locked luks devs from deleted ones. (dlehman)
- Fix a typo that breaks kickstart with encryption. (#469318) (dlehman)
- Call startNewt earlier than network bring up (#469171). (clumens)
- Write out the path to the repo, not anaconda-ks.cfg (#467753). (clumens)
- Allow specifying devices by path if they're files (#468504) (katzj)
- Fix the last pychecker warnings in master (hdegoede)
- Add --strict option to runpychecker.sh (hdegoede)
- Don't sleep(5) after xrandr (ajax)
- Force DPI to 96 even harder (#458738) (ajax)
- Don't try to switch VT to the one that X is on (ajax)
- Only copy /etc/resolv.conf if instPath != '/' (dcantrell)
- 'is not' -> '!=' (dcantrell)
- Write --dhcpclass instead of --class to the anaconda ks file. (jgranado)
- Fix 2 issues in pyparted found by pychecker (hdegoede)
- Add a bit of documentation to the top of runpychecker.sh (hdegoede)
- Add runpychecker.sh script and pychecker-false-positives file (hdegoede)
- Fix saving tracebacks via scp while in text mode. (clumens)
- Search for the hash in the whiteboard, not as the entire whiteboard.
(clumens)
- Fix various syntax errors caught by PyChecker (hdegoede)
- Wouldn't it be nice to have some real documentation in filer.py? (clumens)
- Make sure the productVersion given by .treeinfo exists in bugzilla
(#468657). (clumens)
- Let DNS lookups work from %post scripts (#468132) (dcantrell)
- Do not use /.tmp for temporary files (#468720) (dcantrell)
- Don't treat encrypted PVs as available if we don't have the key. (#465240)
(dlehman)
- Do all new device passphrase prompting from partitioningComplete. (dlehman)
- Fix the obviously stupid typo. (clumens)
- There's a new version of the firewall command for F10 (#467753). (clumens)
- Another fix for printing package summaries in text mode (#468283).
(clumens)
- Fix traceback in network.bringUp() (#468651) (dcantrell)
- lvresize requires a --force arg now (#468478) (katzj)
- Include return code on resize failure error message (#468479) (katzj)
- Catch UnicodeDecodeError so traceback messages display anyway. (dcantrell)
- Do not write NM_CONTROLLED=yes to ifcfg files (#468028) (dcantrell)
- Log D-Bus messages at ERROR or INFO level. (dcantrell)
- Write dhcpclass to the dhclient conf file for the device (#468436)
(dcantrell)
- Tell NetworkManager not to touch network interfaces when / is a netfs
(hans)
- Catch more X failures and fallback to text (#467158). (clumens)
- Fix a typo when using network --gateway (#468364). (clumens)
- Fix icon (#468273) (katzj)
- Remove extra debug info. (pjones)
- Fix the damn spinner in the progress bar. (pjones)
- Fix whitespace. (pjones)
- Fix "looking for installation images" when there's no disc at all. (pjones)
- Make sure dialog deletions take effect sooner (#455676). (clumens)
- Make cdrom drive door status messages be INFO not DEBUG. (pjones)
- Don't switch to tty6 on vnc installs. (clumens)
- Update font list (#462295). (clumens)
- Don't display the entire lengthy device description (#467825). (clumens)
- Fix ext4 detection on existing partitions (#467047) (rvykydal)
- Make sure we handle the /tmp/method file for FTP correctly (#467753).
(clumens)
- Do not write NM_CONTROLLED=yes to ifcfg files (#468028) (dcantrell)
- Revert "dhclient-script not needed for NetworkManager" (clumens)
- Skip Installation Repo when writing out repo kickstart lines. (clumens)
- Correct media check docs (#468061). (clumens)
- Many translation updates
- Make kickstart installs work again (#374271, #392021, #448096, #466340,
#466304) (dcantrell)
- Let users go Back when loading updates. (dcantrell)
- Write ifcfg files to /etc/sysconfig/network-scripts instead of /.tmp
(dcantrell)
- Handle unknown hosts in getDefaultHostname (#466775) (dcantrell)
- Try to look up the hostname by the IP address NM reports (#466775)
(dcantrell)
- NM no longer provides the hostname as a property (#466775). (clumens)
- ext4dev -> ext4 (esandeen). (clumens)
- Move persistent network udev rule to under /etc (#464844). (clumens)
- Update keymaps to include latest Romanian settings (#466117). (clumens)
- Take ip= parameter values by not resetting ipinfo_set. (dcantrell)
- Remove unnecessary STEP_IP code. (dcantrell)
- Fix how configureTCPIP() returns. (dcantrell)
- Write new sysconfig data to a tmpdir first, then move in place. (dcantrell)
- Write NM_CONTROLLED=yes rather than NM_CONTROLLED= (dcantrell)
- Get rid of some iface flags that were not doing anything anymore.
(dcantrell)
- Generate new config files in /.tmp in writeEnabledNetInfo() (dcantrell)
- Remove unused variables from configureTCPIP() (dcantrell)
- Do not call get_connection() twice for DHCP. (dcantrell)
- Ask for language and keyboard in rescue mode (#466525). (clumens)
- Fix bringing up the network in rescue mode (#466523). (clumens)
- If we don't have a translation for a lang name, just use the English
(#466515) (katzj)
- Disable some more IPv6 checks. (clumens)
- Fix a typo (second part of #466374) (katzj)
- Pull in static network settings from the boot: line (#465270) (dcantrell)
- Do not segfault when going back to select a new interface (#465887)
(dcantrell)
- Do not test for DNS settings in mountNfsImage() (dcantrell)
- Populate struct iface correctly in setupIfaceStruct() (dcantrell)
- Do not rely on loaderData->noDns to tell if we have DNS configured.
(dcantrell)
- Skip askmethod dialog if user passes repo= and stage2= (dcantrell)
- Reset resolver in get_connection() (dcantrell)
- Fix problems dealing with PXE boot and the ksdevice= parameter. (dcantrell)
- Disable more IPv6 code in loader for now. (dcantrell)
- Write BOOTPROTO=static for manual IPv4 config. (dcantrell)
- Disable IPv6 widgets for F-10. (dcantrell)
- Add iwlagn driver firmware (#465508). (clumens)
- Move starting HAL to after we've probed for hardware. (clumens)
- Don't try to load a couple modules that no longer exist. (clumens)
- The Chinese font package has changed names (#465290). (clumens)
- Fix a traceback when there's no ksdevice given (#465638). (clumens)
- Fix traceback in post install configuration (hans)
- Disable IPv6 interface widgets in loader for now. (dcantrell)
- Start NetworkManager earlier (#462083) (hans)
- Work around gtk2 bug (#465541) (hans)
- Move our yum.conf out of /etc (#465160) (katzj)
- Correctly display the IP address a vnc viewer should connect to (#465353).
(clumens)
- lohit-fonts-malayam has been replaced by smc-fonts-meera (#456449).
(clumens)
- Fix a typo in cleaning up repos. (clumens)
- Fix the mount error reading for real this time (pjones, #465250). (clumens)
- Support ksdevice=link when booting from boot.iso. (dcantrell)
- Automatically select NIC based on ksdevice= boot parameter. (dcantrell)
- Fix text inconsistency (#465165). (clumens)
- If there's an error running Xvnc, also print it to the console. (clumens)
- Set the installation repo when using the askmethod UI (#463472). (clumens)
- Fix a segfault when the wrong HDISO repo parameter is given. (clumens)
- Remove the 'Installation Repo' cache directory after install (#464853).
(clumens)
- If there aren't any usable NICs, don't write out a config (#465127).
(clumens)
- It helps to specify what the method string should be split on (#464855).
(clumens)
- Gateway and nameserver are optional for static network configuration.
(dcantrell)
- Store nameserver in NetworkDevice object. (dcantrell)
- Fix a traceback calling enableNetwork (#464849). (clumens)
- Enable groups when creating new repos since yum doesn't do that now.
(clumens)
- Update FQDN patch to fix a couple tracebacks (#464191). (clumens)
- Fix static network configuration from boot.iso installs. (dcantrell)
- Use all caps naming for the netdev keys. (dcantrell)
- Left justify text in ui/netconfig.glade interface. (dcantrell)
- Use the right attribute for repo URLs. (clumens)
- Use fullscreen for small screens (#444943) (katzj)
- Another try at fixing up reading errors from mount. (clumens)
- Don't traceback if no baseurl has been set yet. (clumens)
- Allow users to enter a hostname or FQDN during installation (#464191)
(dcantrell)
- Whitespace cleanups. (dcantrell)
- Fix mk-s390-cdboot on s390x (#184648) (dcantrell)
- Run all text through unicode() before putting it into the TextBuffer.
(clumens)
- Add reverse chap iscsi bits for kickstart (hans)
- Properly center the passphrase entry dialog. (clumens)
- Fix test for an empty hostname. (clumens)
- Support installs to SD via MMC (#461884) (katzj)
- Set ANACONDA_PRODUCTNAME, etc from /etc/system-release (#464120) (alsadi)
- Reduce code duplication by moving methods into backend (katzj)
- Select packages after repos are set up (#457583) (katzj)
- Add a basic reset method (katzj)
- Cleanups and simplifications to repo setup (clumens) (katzj)
- Revert "Revert "lang-names should really only depend on lang-table""
(katzj)
- Fix lang-name generation + fix traceback with LANG=C (katzj)
- Allow going back to the method selection screen on error (#463473).
(clumens)
- Make the boot loader device dialog less ugly (#463489). (clumens)
- Look in images/ for install.img on HDISO (#463474). (clumens)
- Sort Installation Repo to the top of the repo list. (clumens)
- Fuzzy string to fix translation build (katzj)
- Fix network interface bring up in text mode (#463861, #462592) (dcantrell)
- Bring back isys.resetResolv() and fix NetworkManager polling in
network.py. (dcantrell)
- Poll 'State' property from NetworkManager in network.bringUp() (dcantrell)
- Log error in rescue mode is network.bringUp() fails. (dcantrell)
- Set the first network device in the list to active. (dcantrell)
- Get rid of firstnetdevice in Network (dcantrell)
- Do not write /lib/udev.d rules if instPath is '' (dcantrell)
- Fix problems with bringDeviceUp() calls (#463512) (dcantrell)
- Restore old lang-names generation method (dcantrell)
- Remount /mnt/sysimage/dev after migrating filesystems. (clumens)
- Use the instroot parameter like we should be doing. (clumens)
- Call network.bringDeviceUp() instead of old isys functions. (dcantrell)
- Pass device name to network.setDNS() and network.setGateway(). (dcantrell)
- NetworkManager fixes in network.py (dcantrell)
- Remove code from isys not needed for NetworkManager. (dcantrell)
- Avoid writing out NM_CONTROLLED more than once. (dcantrell)
- Write out final ifcfg-DEVICE files correctly. (dcantrell)
- Use POSIX and LSB hostname length limit. (dcantrell)
- Consistent whitespace usage in network.py (dcantrell)
- Do not try to start hald or dbus-daemon from anaconda. (dcantrell)
- On HDISO installs, mark LABEL= and UUID= partitions as protected. (clumens)
- Do encrypted device passphrase retrofits while activating partitioning.
(dlehman)
- Use one passphrase for all new LUKS devices and offer retrofit to old
ones. (dlehman)
- There's only one passphrase member (encryptionPassphrase) in Partitions.
(dlehman)
- Only add LUKSDevice instances to PV requests as needed. (dlehman)
- New device passphrase is now always global w/ option to retrofit. (dlehman)
- Don't prompt for a passphrase when creating encrypted devices. (dlehman)
- Define a method to add a passphrase to an existing LUKS device. (dlehman)
- Fix a traceback when starting a shell in rescue mode (#462148). (clumens)
- md, lock_nolock, and dm_emc kernel modules no longer exist. (clumens)
- Fix iscsi disk detection with newer kernels (rh 461839, 461841) (hans)
- Fix the crash reported in bug 454135 (hans)
- Make iBFT reading explicit from a higher level (hans)
- Add ibft flag to ease in testing. (hans)
- Support iSCSI CHAP and Reverse CHAP authentication (rhbz#402431,
rhbz#432819) (hans)
- Don't set iscsi devices to autostart (rhbz#437891) (hans)
- Add full CHAP support to iSCSI. (rhbz#432819) (hans)
- Do not try to initialize iSCSI, when no portal (#435173) (hans)
- Fix wrong function names for iscsi login/start (rhbz#295154) (hans)
- Set an attribute when iscsid is started (#431904). (hans)
- Better fixes for iscsi probing (patch from jlaska) (hans)
- Make sure ISCSIADM and such are defined (rhbz#431924) (hans)
- Fix iscsi so that mkinitrd can actually talk to the running daemon (hans)
- Make iscsi/ibft work (hans)
- Add mk-images changes forgotten in previous commit (hans)
- Add support for iSCSI iBFT table (#307761) (hans)
- Use struct audit_reply instead of struct auditd_reply_list (dcantrell)
* Sat Sep 06 2008 David Cantrell <dcantrell@redhat.com> - 11.4.1.31-1
- Use --service=NAME in firewall.py when calling lokkit (dcantrell)
- Make NM work for the DHCP case, at least (dcbw) (#461071). (clumens)
- Sleep a little after dbus to give it time before HAL connects. (clumens)
- Add libsqlite to the initrd, which is needed by NSS libs. (clumens)
- Add more dlopen()ed libraries to the initrd. (clumens)
- Fix various problems with the exn saving UI (#461129). (clumens)
- Fail gracefully if we can't talk to NetworkManager over DBus. (dcantrell)
- Reword text for easy of translating plurals (#460728). (clumens)
- Make sure /bin/sh is linked to /bin/bash (dcantrell)
- Do not include /usr/lib/gconv in install.img (dcantrell)
- Add /etc/NetworkManager/dispatcher.d to the install.img. (clumens)
- Remove last vestiges of rhpxl and pirut. (clumens)
- Only one list of packages in upd-instroot, thanks. (clumens)
- Add xrandr back into the install.img (#458738). (clumens)
- Add a couple more directories to search paths. (clumens)
- Do repo setup and sack setup as separate steps. (clumens)
- Fix a typo that was causing repos in the kickstart file to be skipped
(#451020). (clumens)
- Fix a traceback with unencrypted autopart. (dlehman)
- doLoggingSetup has grown some new arguments (#460654). (clumens)
- Updated German translation (fabian)
- Remove references to isConfigured in network.py (dcantrell)
- Define the NM_STATE_* constants in isys.py (dcantrell)
- Rewrite NetworkWindow to only prompt for hostname. (dcantrell)
- Pad the icon more in network.glade (dcantrell)
- Removed iface_dns_lookup() (dcantrell)
- Don't pass NULL to dbus_message_unref() (dcantrell)
- New network configuration screen for GTK+ UI. (dcantrell)
- Pass family to iface_ip2str() call (dcantrell)
- Rewrite iface_ip2str() to talk to NetworkManager over D-Bus (dcantrell)
- New translation (besnik)
- Pull in the gtkrc file so we can find the theme. (clumens)
- Use signed git tags (katzj)
- Skip networkDeviceCheck in dispatch.py (dcantrell)
- Do not call has_key() on NetworkDevice, use isys.NM_* (dcantrell)
- Separate lines per BR. (dcantrell)
- Remove invalid line iw/autopart_type.py (dcantrell)
- Fix syntax error in yuminstall.py, fix pychecker warnings. (dcantrell)
- Updated Hungarian translation (sulyokpeti)
- Add missing () to function definitions. (dcantrell)
- Fix err handling in doMultiMount() (dcantrell)
- Revert "Pass --follow to git-log" (dcantrell)
- Remove references to /tmp/netinfo (dcantrell)
- Gather network settings from NetworkManager and ifcfg files. (dcantrell)
- Update the pot file and refresh the pos (katzj)
- For all HTTP/FTP repos, keep the cached repodata (#173441). (clumens)
- Fix a traceback when trying to set the status whiteboard on a bug.
(clumens)
- When the wrong filesystem type is used, raise a more explicit error.
(clumens)
- Don't copy the install.img over in single media cases (#216167). (clumens)
- Remove isys.getopt() (dcantrell)
- Remove code not used in net.c (dcantrell)
- Write to /etc/sysconfig/network-scripts/ifcfg-INTERFACE (dcantrell)
- mystrstr() -> strstr() (dcantrell)
- Expand getDeviceProperties to return all devices. (dcantrell)
- Pass --follow to git-log (dcantrell)
- Support accessing preexisting LUKS devs using LRW or XTS ciphers.
(#455063) (dlehman)
- Use yum's handling of optional/default/mandatory package selection
(#448172). (clumens)
- List iSCSI multipath devices in the installer UI. (dcantrell)
- Fix text wrap width on the partition type combo, for real this time
(#221791) (dlehman)
- For /dev/hvc0 terminals, set TERM to vt320 (#219556). (dcantrell)
- The Timer class is no longer used. (clumens)
- Handle preexisting swraid w/ encrypted member disks/partitions. (dlehman)
- Don't try to close a dm-crypt mapping that is not open. (dlehman)
- Remove unused silo code that wouldn't even build if it were used. (clumens)
- Remove some really old, really unused code. (clumens)
- Add another mount function that takes a list of fstypes to try. (clumens)
- Download progress indicator for FTP and HTTP in stage 1. (dcantrell)
- Make sure we wait for NetworkManager. (dcantrell)
- Renamed loader2 subdirectory to loader (hooray for git) (dcantrell)
- Do not include wireless.h or call is_wireless_device() (dcantrell)
- Add getDeviceProperties() and rewrite getMacAddress() (dcantrell)
- Do not include wireless.h (dcantrell)
- Rewrite isys.isWireless() to use D-Bus and NetworkManager (dcantrell)
- Rewrite isys.getIPAddress() to use D-Bus and NetworkManager. (dcantrell)
- Include ../isys/ethtool.h instead of ../isys/net.h. (dcantrell)
- Rename isys/net.h to isys/ethtool.h, removed unnecessary typedefs.
(dcantrell)
- Removed waitForLink() function in loader. (dcantrell)
- Remove initLoopback() function in loader (dcantrell)
- Use D-Bus properties to get current NM state. (dcantrell)
- Use dbus in hasActiveNetDev() and _anyUsing() (dcantrell)
- Use NetworkManager instead of libdhcp. (#458183) (dcantrell)
- When mount fails, pass the error message up to the UI layer. (clumens)
- Bring askmethod back to prompt for the location of install.img. (clumens)
- Don't try to use self.tree as the mode to open .discinfo. (clumens)
- Remove all the RPM lock files before creating a new transaction (#456949). (clumens)
- Support VDSK devices on s390x (#264061) (dcantrell)
- Remove an instance of NEEDGR still existing to fix graphical
isolinux (#457144) (katzj)
- use newer mke2fs arguments for different filesystems (sandeen)
- Use attributes to tell us whether filesystems are
bootable (#457037). (clumens)
- Make sure we drag in gzip, used by the image creation stuff. (jkeating)
