- service,properties: support DPD parameters

This commit is contained in:
eabdullin 2024-01-03 13:32:01 +03:00
parent 2bdb7cbdac
commit 6f1d47ece0
2 changed files with 433 additions and 3 deletions

View File

@ -0,0 +1,425 @@
From 6c35e460d393e73c478c7e885e875ea8c4918133 Mon Sep 17 00:00:00 2001
From: Beniamino Galvani <bgalvani@redhat.com>
Date: Thu, 23 Nov 2023 14:13:59 +0100
Subject: [PATCH 2/5] service,properties: support DPD parameters
Add support for parameters related to Dead Peer Detection (DPD), a
mechanism to check for reachability of IKE peers.
---
man/nm-settings-libreswan.5.in | 21 +++-
properties/nm-libreswan-editor-plugin.c | 6 +
shared/nm-service-defines.h | 2 +
shared/utils.c | 13 +++
src/nm-libreswan-service.c | 4 +-
7 files changed, 239 insertions(+), 4 deletions(-)
diff --git a/man/nm-settings-libreswan.5.in b/man/nm-settings-libreswan.5.in
index 5a81d1b..79617af 100644
--- a/man/nm-settings-libreswan.5.in
+++ b/man/nm-settings-libreswan.5.in
@@ -85,7 +85,26 @@ ignored.
ignored.
.TP
.I "dpdtimeout"
-ignored.
+the length of time that we will idle without hearing back from our peer. After
+this period has elapsed with no response and no traffic, we will declare the
+peer dead, and remove the SA. Set value bigger than dpddelay to enable. If
+dpdtimeout is set, dpddelay also needs to be set. Must be a number optionally
+followed by a time unit: 's' (seconds), 'm' (minutes), 'h', (hours) or 'd'
+(days); if the unit is not specified, it defaults to seconds. Corresponds to the
+Libreswan parameter of the same name.
+.TP
+.I "dpddelay"
+the delay between Dead Peer Detection (IKEv1 RFC 3706) or IKEv2 Liveness
+keepalives that are sent for this connection. Must be a number optionally
+followed by a time unit: 's' (seconds), 'm' (minutes), 'h', (hours) or 'd'
+(days); if the unit is not specified, it defaults to seconds. Corresponds to the
+Libreswan parameter of the same name.
+.TP
+.I "dpdaction"
+When a DPD enabled peer is declared dead, what action should be taken. "hold"
+(default) means the eroute will be put into %hold status, while "clear" means
+the eroute and SA with both be cleared. "restart" means that ALL SAs to the dead
+peer will renegotiated. Corresponds to the Libreswan parameter of the same name.
.TP
.I "ike"
allowed ciphers to be negotiatied to establish the IKE SAs. Corresponds to the
diff --git a/properties/nm-libreswan-editor-plugin.c b/properties/nm-libreswan-editor-plugin.c
index af72425..428eb1c 100644
--- a/properties/nm-libreswan-editor-plugin.c
+++ b/properties/nm-libreswan-editor-plugin.c
@@ -198,6 +198,12 @@ import_from_file (NMVpnEditorPlugin *self,
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_FRAGMENTATION, &str[14]);
else if (g_str_has_prefix (str, "mobike="))
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_MOBIKE, &str[7]);
+ else if (g_str_has_prefix (str, "dpddelay="))
+ nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDDELAY, &str[9]);
+ else if (g_str_has_prefix (str, "dpdtimeout="))
+ nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDTIMEOUT, &str[11]);
+ else if (g_str_has_prefix (str, "dpdaction="))
+ nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDACTION, &str[10]);
else if (g_str_has_prefix (str, "rightsubnet=")) {
if (!g_str_has_prefix (str, "rightsubnet=0.0.0.0/0"))
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_REMOTENETWORK, &str[12]);
diff --git a/shared/nm-service-defines.h b/shared/nm-service-defines.h
index a01a00f..c613fb7 100644
--- a/shared/nm-service-defines.h
+++ b/shared/nm-service-defines.h
@@ -52,6 +52,8 @@
#define NM_LIBRESWAN_KEY_PFS "pfs"
#define NM_LIBRESWAN_KEY_PFSGROUP "pfsgroup"
#define NM_LIBRESWAN_KEY_DPDTIMEOUT "dpdtimeout"
+#define NM_LIBRESWAN_KEY_DPDDELAY "dpddelay"
+#define NM_LIBRESWAN_KEY_DPDACTION "dpdaction"
#define NM_LIBRESWAN_KEY_IKE "ike"
#define NM_LIBRESWAN_KEY_ESP "esp"
#define NM_LIBRESWAN_KEY_IKELIFETIME "ikelifetime"
diff --git a/shared/utils.c b/shared/utils.c
index 1d762cf..9c70437 100644
--- a/shared/utils.c
+++ b/shared/utils.c
@@ -118,6 +118,7 @@ nm_libreswan_config_write (gint fd,
const char *fragmentation;
const char *mobike;
const char *pfs;
+ const char *item;
gboolean is_ikev2 = FALSE;
g_return_val_if_fail (fd > 0, FALSE);
@@ -297,6 +298,18 @@ nm_libreswan_config_write (gint fd,
if (mobike && strlen (mobike))
WRITE_CHECK (fd, debug_write_fcn, error, " mobike=%s", mobike);
+ item = nm_setting_vpn_get_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDDELAY);
+ if (item && strlen (item))
+ WRITE_CHECK (fd, debug_write_fcn, error, " dpddelay=%s", item);
+
+ item = nm_setting_vpn_get_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDTIMEOUT);
+ if (item && strlen (item))
+ WRITE_CHECK (fd, debug_write_fcn, error, " dpdtimeout=%s", item);
+
+ item = nm_setting_vpn_get_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDACTION);
+ if (item && strlen (item))
+ WRITE_CHECK (fd, debug_write_fcn, error, " dpdaction=%s", item);
+
WRITE_CHECK (fd, debug_write_fcn, error, " nm-configured=yes");
WRITE_CHECK_NEWLINE (fd, trailing_newline, debug_write_fcn, error, " auto=add");
diff --git a/src/nm-libreswan-service.c b/src/nm-libreswan-service.c
index a101946..c1519d4 100644
--- a/src/nm-libreswan-service.c
+++ b/src/nm-libreswan-service.c
@@ -260,7 +260,9 @@ static ValidProperty valid_properties[] = {
{ NM_LIBRESWAN_KEY_DHGROUP, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_PFS, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_PFSGROUP, G_TYPE_STRING, 0, 0 },
- { NM_LIBRESWAN_KEY_DPDTIMEOUT, G_TYPE_INT, 0, 86400 },
+ { NM_LIBRESWAN_KEY_DPDACTION, G_TYPE_STRING, 0, 0 },
+ { NM_LIBRESWAN_KEY_DPDDELAY, G_TYPE_STRING, 0, 0 },
+ { NM_LIBRESWAN_KEY_DPDTIMEOUT, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_IKE, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_ESP, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_IKELIFETIME, G_TYPE_STRING, 0, 0 },
--
GitLab
From f5e8bf1ebe17d13c49780647973dd742f40f112c Mon Sep 17 00:00:00 2001
From: Beniamino Galvani <bgalvani@redhat.com>
Date: Fri, 24 Nov 2023 16:27:18 +0100
Subject: [PATCH 3/5] service,properties: support the "ipsec-interface" option
Introduce a new option "ipsec-interface" to create a XFRM virtual
interface for "Routing based VPNs" (as opposed to "Policy based
VPNs").
---
man/nm-settings-libreswan.5.in | 7 +++
properties/nm-libreswan-editor-plugin.c | 2 +
shared/nm-service-defines.h | 1 +
shared/utils.c | 4 ++
src/nm-libreswan-service.c | 11 +++-
7 files changed, 109 insertions(+), 3 deletions(-)
diff --git a/man/nm-settings-libreswan.5.in b/man/nm-settings-libreswan.5.in
index 79617af..8c3b59b 100644
--- a/man/nm-settings-libreswan.5.in
+++ b/man/nm-settings-libreswan.5.in
@@ -153,6 +153,13 @@ Matches the Libreswan parameter of the same name.
Allowed values are: 'yes' and 'no'.
Matches the Libreswan parameter of the same name.
.TP
+.I "ipsec-interface"
+If set, create or use an existing virtual interface ipsecXXX for "Routing based
+VPNs" (as opposed to "Policy based VPNs"). Valid options are 'yes', 'no' or a
+number. When using a number, the IPsec interface created and/or used will use
+that number as part of the interface name. Corresponds to the Libreswan
+parameter of the same name.
+.TP
.I "pskinputmodes"
where the 'pskvalue' can be retrieved. Used internally by the plugin. Allowed values are: 'unused', 'save', 'ask'.
.TP
diff --git a/properties/nm-libreswan-editor-plugin.c b/properties/nm-libreswan-editor-plugin.c
index 428eb1c..c0e6c81 100644
--- a/properties/nm-libreswan-editor-plugin.c
+++ b/properties/nm-libreswan-editor-plugin.c
@@ -204,6 +204,8 @@ import_from_file (NMVpnEditorPlugin *self,
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDTIMEOUT, &str[11]);
else if (g_str_has_prefix (str, "dpdaction="))
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDACTION, &str[10]);
+ else if (g_str_has_prefix (str, "ipsec-interface="))
+ nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_IPSEC_INTERFACE, &str[16]);
else if (g_str_has_prefix (str, "rightsubnet=")) {
if (!g_str_has_prefix (str, "rightsubnet=0.0.0.0/0"))
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_REMOTENETWORK, &str[12]);
diff --git a/shared/nm-service-defines.h b/shared/nm-service-defines.h
index c613fb7..78193f2 100644
--- a/shared/nm-service-defines.h
+++ b/shared/nm-service-defines.h
@@ -65,6 +65,7 @@
#define NM_LIBRESWAN_KEY_REKEY "rekey"
#define NM_LIBRESWAN_KEY_FRAGMENTATION "fragmentation"
#define NM_LIBRESWAN_KEY_MOBIKE "mobike"
+#define NM_LIBRESWAN_KEY_IPSEC_INTERFACE "ipsec-interface"
#define NM_LIBRESWAN_IKEV2_NO "no"
#define NM_LIBRESWAN_IKEV2_NEVER "never"
diff --git a/shared/utils.c b/shared/utils.c
index 9c70437..1928b1b 100644
--- a/shared/utils.c
+++ b/shared/utils.c
@@ -310,6 +310,10 @@ nm_libreswan_config_write (gint fd,
if (item && strlen (item))
WRITE_CHECK (fd, debug_write_fcn, error, " dpdaction=%s", item);
+ item = nm_setting_vpn_get_data_item (s_vpn, NM_LIBRESWAN_KEY_IPSEC_INTERFACE);
+ if (item && strlen (item))
+ WRITE_CHECK (fd, debug_write_fcn, error, " ipsec-interface=%s", item);
+
WRITE_CHECK (fd, debug_write_fcn, error, " nm-configured=yes");
WRITE_CHECK_NEWLINE (fd, trailing_newline, debug_write_fcn, error, " auto=add");
diff --git a/src/nm-libreswan-service.c b/src/nm-libreswan-service.c
index c1519d4..90a0488 100644
--- a/src/nm-libreswan-service.c
+++ b/src/nm-libreswan-service.c
@@ -274,6 +274,7 @@ static ValidProperty valid_properties[] = {
{ NM_LIBRESWAN_KEY_REKEY, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_FRAGMENTATION, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_MOBIKE, G_TYPE_STRING, 0, 0 },
+ { NM_LIBRESWAN_KEY_IPSEC_INTERFACE, G_TYPE_STRING, 0, 0 },
/* Ignored option for internal use */
{ NM_LIBRESWAN_KEY_PSK_INPUT_MODES, G_TYPE_NONE, 0, 0 },
{ NM_LIBRESWAN_KEY_XAUTH_PASSWORD_INPUT_MODES, G_TYPE_NONE, 0, 0 },
@@ -1252,6 +1253,7 @@ handle_callback (NMDBusLibreswanHelper *object,
gboolean success = FALSE;
guint i;
const char *verb;
+ const char *virt_if;
_LOGI ("Configuration from the helper received.");
@@ -1274,9 +1276,14 @@ handle_callback (NMDBusLibreswanHelper *object,
/*
* Tunnel device
- * Indicate that this plugin doesn't use tun/tap device
*/
- val = g_variant_new_string (NM_VPN_PLUGIN_IP4_CONFIG_TUNDEV_NONE);
+ virt_if = lookup_string (env, "PLUTO_VIRT_INTERFACE");
+ if (virt_if && !nm_streq (virt_if, "NULL")) {
+ val = g_variant_new_string (virt_if);
+ } else {
+ val = g_variant_new_string (NM_VPN_PLUGIN_IP4_CONFIG_TUNDEV_NONE);
+ }
+
g_variant_builder_add (&config, "{sv}", NM_VPN_PLUGIN_IP4_CONFIG_TUNDEV, val);
/* IP address */
--
GitLab
From aa14380637a3de20ce9a59abc8b927368b1ab926 Mon Sep 17 00:00:00 2001
From: Beniamino Galvani <bgalvani@redhat.com>
Date: Tue, 28 Nov 2023 11:59:05 +0100
Subject: [PATCH 4/5] service: ignore next hop in routed mode
In routed mode, the traffic needs to be sent directly over the
interface without a gateway.
---
src/nm-libreswan-service.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/src/nm-libreswan-service.c b/src/nm-libreswan-service.c
index 90a0488..c5562d7 100644
--- a/src/nm-libreswan-service.c
+++ b/src/nm-libreswan-service.c
@@ -1197,7 +1197,7 @@ _take_route (GPtrArray *routes, GVariant *new, gboolean alive)
}
static void
-handle_route (GPtrArray *routes, GVariant *env, gboolean alive)
+handle_route (GPtrArray *routes, GVariant *env, gboolean alive, gboolean is_xfrmi)
{
GVariantBuilder builder;
const gchar *net, *mask, *next_hop, *my_sourceip;
@@ -1210,9 +1210,13 @@ handle_route (GPtrArray *routes, GVariant *env, gboolean alive)
next_hop = lookup_string (env, "PLUTO_NEXT_HOP");
my_sourceip = lookup_string (env, "PLUTO_MY_SOURCEIP");
+
if (!net || !mask || !next_hop || !my_sourceip)
return;
+ if (is_xfrmi)
+ next_hop = "0.0.0.0";
+
if (g_strcmp0 (net, "0.0.0.0") == 0 && g_strcmp0 (mask, "0")) {
g_variant_builder_init (&builder, G_VARIANT_TYPE ("au"));
g_variant_builder_add_value (&builder, addr4_to_gvariant ("0.0.0.0"));
@@ -1254,6 +1258,7 @@ handle_callback (NMDBusLibreswanHelper *object,
guint i;
const char *verb;
const char *virt_if;
+ gboolean is_xfrmi = FALSE;
_LOGI ("Configuration from the helper received.");
@@ -1332,16 +1337,23 @@ handle_callback (NMDBusLibreswanHelper *object,
if (val)
g_variant_builder_add (&config, "{sv}", NM_VPN_PLUGIN_IP4_CONFIG_BANNER, val);
+ /* Indicates whether the VPN is using a XFRM interface (via option ipsec-interface=) */
+ is_xfrmi = nm_streq0 (lookup_string (env, "PLUTO_XFRMI_ROUTE"), "yes");
- val = addr4_to_gvariant (lookup_string (env, "PLUTO_NEXT_HOP"));
- if (val)
- g_variant_builder_add (&config, "{sv}", NM_VPN_PLUGIN_IP4_CONFIG_INT_GATEWAY, val);
+ if (is_xfrmi) {
+ /* The traffic needs to be sent directly over the interface without a gateway.
+ * Ignore the next hop. */
+ } else {
+ val = addr4_to_gvariant (lookup_string (env, "PLUTO_NEXT_HOP"));
+ if (val)
+ g_variant_builder_add (&config, "{sv}", NM_VPN_PLUGIN_IP4_CONFIG_INT_GATEWAY, val);
+ }
/* This route */
if (g_strcmp0 (verb, "route-client") == 0 || g_strcmp0 (verb, "route-host"))
- handle_route (priv->routes, env, TRUE);
+ handle_route (priv->routes, env, TRUE, is_xfrmi);
else if (g_strcmp0 (verb, "unroute-client") == 0 || g_strcmp0 (verb, "unroute-host"))
- handle_route (priv->routes, env, FALSE);
+ handle_route (priv->routes, env, FALSE, is_xfrmi);
/* Routes */
g_variant_builder_init (&builder, G_VARIANT_TYPE ("aau"));
--
GitLab
From 320b9daa2369cf2f76504544dc071911e2802421 Mon Sep 17 00:00:00 2001
From: Beniamino Galvani <bgalvani@redhat.com>
Date: Thu, 30 Nov 2023 16:45:15 +0100
Subject: [PATCH 5/5] service,properties: support the "authby" option
Add support for the "authby" option, used to specify the mutual
authentication mechanism.
---
man/nm-settings-libreswan.5.in | 4 +++
properties/nm-libreswan-editor-plugin.c | 2 ++
shared/nm-service-defines.h | 1 +
shared/utils.c | 9 ++++--
src/nm-libreswan-service.c | 1 +
7 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/man/nm-settings-libreswan.5.in b/man/nm-settings-libreswan.5.in
index 8c3b59b..b421986 100644
--- a/man/nm-settings-libreswan.5.in
+++ b/man/nm-settings-libreswan.5.in
@@ -56,6 +56,10 @@ parameter of the same name.
specifies the remote's public key for RSA authentication.
When the 'leftcert' key is defined a default value of "%cert" is assumed.
.TP
+.I "authby"
+How the two security gateways should authenticate each other. Corresponds to the
+Libreswan parameter of the same name.
+.TP
.I "left"
contains the local address that should be used during IKE negotiation. If not specified, the value
"%defaultroute" is assumed. Corresponds to the Libreswan parameter of the same name.
diff --git a/properties/nm-libreswan-editor-plugin.c b/properties/nm-libreswan-editor-plugin.c
index c0e6c81..b5c0d9e 100644
--- a/properties/nm-libreswan-editor-plugin.c
+++ b/properties/nm-libreswan-editor-plugin.c
@@ -206,6 +206,8 @@ import_from_file (NMVpnEditorPlugin *self,
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_DPDACTION, &str[10]);
else if (g_str_has_prefix (str, "ipsec-interface="))
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_IPSEC_INTERFACE, &str[16]);
+ else if (g_str_has_prefix (str, "authby="))
+ nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_AUTHBY, &str[7]);
else if (g_str_has_prefix (str, "rightsubnet=")) {
if (!g_str_has_prefix (str, "rightsubnet=0.0.0.0/0"))
nm_setting_vpn_add_data_item (s_vpn, NM_LIBRESWAN_KEY_REMOTENETWORK, &str[12]);
diff --git a/shared/nm-service-defines.h b/shared/nm-service-defines.h
index 78193f2..3fdf2ef 100644
--- a/shared/nm-service-defines.h
+++ b/shared/nm-service-defines.h
@@ -41,6 +41,7 @@
#define NM_LIBRESWAN_KEY_LEFTID "leftid"
#define NM_LIBRESWAN_KEY_LEFTRSASIGKEY "leftrsasigkey"
#define NM_LIBRESWAN_KEY_LEFTCERT "leftcert"
+#define NM_LIBRESWAN_KEY_AUTHBY "authby"
#define NM_LIBRESWAN_KEY_PSK_VALUE "pskvalue"
#define NM_LIBRESWAN_KEY_PSK_INPUT_MODES "pskinputmodes"
#define NM_LIBRESWAN_KEY_LEFTXAUTHUSER "leftxauthusername"
diff --git a/shared/utils.c b/shared/utils.c
index 1928b1b..cbc117c 100644
--- a/shared/utils.c
+++ b/shared/utils.c
@@ -110,6 +110,7 @@ nm_libreswan_config_write (gint fd,
const char *leftcert;
const char *leftrsasigkey;
const char *rightrsasigkey;
+ const char *authby;
const char *remote_network;
const char *ikev2 = NULL;
const char *rightid;
@@ -164,6 +165,7 @@ nm_libreswan_config_write (gint fd,
leftrsasigkey = nm_setting_vpn_get_data_item (s_vpn, NM_LIBRESWAN_KEY_LEFTRSASIGKEY);
rightrsasigkey = nm_setting_vpn_get_data_item (s_vpn, NM_LIBRESWAN_KEY_RIGHTRSASIGKEY);
leftcert = nm_setting_vpn_get_data_item (s_vpn, NM_LIBRESWAN_KEY_LEFTCERT);
+ authby = nm_setting_vpn_get_data_item (s_vpn, NM_LIBRESWAN_KEY_AUTHBY);
if (leftcert && strlen (leftcert)) {
WRITE_CHECK (fd, debug_write_fcn, error, " leftcert=%s", leftcert);
if (!leftrsasigkey)
@@ -175,8 +177,11 @@ nm_libreswan_config_write (gint fd,
WRITE_CHECK (fd, debug_write_fcn, error, " leftrsasigkey=%s", leftrsasigkey);
if (rightrsasigkey && strlen (rightrsasigkey))
WRITE_CHECK (fd, debug_write_fcn, error, " rightrsasigkey=%s", rightrsasigkey);
- if ( !(leftrsasigkey && strlen (leftrsasigkey))
- && !(rightrsasigkey && strlen (rightrsasigkey))) {
+
+ if (authby && strlen (authby)) {
+ WRITE_CHECK (fd, debug_write_fcn, error, " authby=%s", authby);
+ } else if ( !(leftrsasigkey && strlen (leftrsasigkey))
+ && !(rightrsasigkey && strlen (rightrsasigkey))) {
WRITE_CHECK (fd, debug_write_fcn, error, " authby=secret");
}
diff --git a/src/nm-libreswan-service.c b/src/nm-libreswan-service.c
index c5562d7..fc470a6 100644
--- a/src/nm-libreswan-service.c
+++ b/src/nm-libreswan-service.c
@@ -256,6 +256,7 @@ static ValidProperty valid_properties[] = {
{ NM_LIBRESWAN_KEY_LEFTUSERNAME, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_LEFTRSASIGKEY, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_LEFTCERT, G_TYPE_STRING, 0, 0 },
+ { NM_LIBRESWAN_KEY_AUTHBY, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_DOMAIN, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_DHGROUP, G_TYPE_STRING, 0, 0 },
{ NM_LIBRESWAN_KEY_PFS, G_TYPE_STRING, 0, 0 },
--
GitLab

View File

@ -6,7 +6,7 @@
%global real_version 1.2.14 %global real_version 1.2.14
%global rpm_version 1.2.14 %global rpm_version 1.2.14
%global release_version 1 %global release_version 2
%global real_version_major %(printf '%s' '%{real_version}' | sed -n 's/^\\([1-9][0-9]*\\.[1-9][0-9]*\\)\\.[1-9][0-9]*$/\\1/p') %global real_version_major %(printf '%s' '%{real_version}' | sed -n 's/^\\([1-9][0-9]*\\.[1-9][0-9]*\\)\\.[1-9][0-9]*$/\\1/p')
@ -17,12 +17,14 @@
Summary: NetworkManager VPN plug-in for IPsec VPN Summary: NetworkManager VPN plug-in for IPsec VPN
Name: NetworkManager-libreswan Name: NetworkManager-libreswan
Version: %{rpm_version} Version: %{rpm_version}
Release: %{release_version}%{?dist}.3 Release: %{release_version}%{?dist}.alma.1
License: GPLv2+ License: GPLv2+
URL: http://www.gnome.org/projects/NetworkManager/ URL: http://www.gnome.org/projects/NetworkManager/
Source0: https://download.gnome.org/sources/NetworkManager-libreswan/%{real_version_major}/%{name}-%{real_version}.tar.xz Source0: https://download.gnome.org/sources/NetworkManager-libreswan/%{real_version_major}/%{name}-%{real_version}.tar.xz
#Patch1: 0001-some.patch # Patches were taken from:
# https://gitlab.gnome.org/GNOME/NetworkManager-libreswan/-/merge_requests/25
Patch1: service-properties-support-DPD-parameters.patch
BuildRequires: make BuildRequires: make
BuildRequires: gcc BuildRequires: gcc
@ -116,6 +118,9 @@ rm -f %{buildroot}%{_libdir}/NetworkManager/lib*.la
%changelog %changelog
* Wed Jan 03 2024 Eduard Abdullin <eabdullin@almalinux.org> - 1.2.14-2.alma.1
- service,properties: support DPD parameters
* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 1.2.14-1.3 * Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 1.2.14-1.3
- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags - Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
Related: rhbz#1991688 Related: rhbz#1991688